a. The y-component of the magnetic force on the segment AB of the loop is zero. b. The torque magnitude that the magnetic field exerts on the loop can be calculated using the formula τ = IAB × B × sin(θ), where I is the current, AB is the area of the loop, B is the magnetic field, and θ is the angle between the loop and the magnetic field.
a. The y-component of the magnetic force on the segment AB of the loop is zero because the magnetic field is directed in the -x axis direction, perpendicular to the y-axis. The magnetic force experienced by a current-carrying segment is given by the equation F = I × L × B × sin(θ), where I is the current, L is the length of the segment, B is the magnetic field, and θ is the angle between the segment and the magnetic field.
In this case, the segment AB is parallel to the magnetic field (θ = 90°), resulting in sin(90°) = 1, but the y-component of the force is zero because the force is in the x-direction.
b. The torque magnitude that the magnetic field exerts on the loop can be calculated using the formula τ = IAB × B × sin(θ), where I is the current, AB is the area of the loop, B is the magnetic field, and θ is the angle between the loop and the magnetic field.
The torque acts to rotate the loop around an axis perpendicular to the plane of the loop. To calculate the torque, we need to determine the area of the loop and the angle θ. Once these values are known, we can plug them into the formula to find the torque magnitude.
Learn more about magnetic force here:
https://brainly.com/question/10353944
#SPJ11
As shown in the figure, where V = 0 at infinity, what is the net electric potential at P due to the q1= 3.8, q2 = 3.8, q3 = 2.5, q4 = 6, q5 = 4.6, q6 = 8.6 with d =9.1.
The net electric potential at P due to charges q1, q2, q3, q4, q5, q6 is 13.47 x 10⁹ V
Given, q1= 3.8 μC, q2 = 3.8 μC, q3 = 2.5 μC, q4 = 6 μC, q5 = 4.6 μC, q6 = 8.6 μC and d =9.1. We have to find the net electric potential at P due to these charges.Let V1, V2, V3, V4, V5, V6 be the electric potentials at point P due to charges q1, q2, q3, q4, q5, q6 respectively.
Also, let VP be the resultant potential at P due to all charges.We know that the electric potential at any point due to a point charge q at a distance d from it is given by,V = (1/4πε) (q/d) ...........(1)Where ε is the permittivity of free space and has a constant value of 8.85 x 10⁻¹² C²/Nm².
Therefore, the electric potential at P due to charges q1, q2, q3, q4, q5, q6 can be given by,V1 = (1/4πε) (q1/d) ...........(2)V2 = (1/4πε) (q2/d) ...........(3)V3 = (1/4πε) (q3/d) ...........(4)V4 = (1/4πε) (q4/d) ...........(5)V5 = (1/4πε) (q5/d) ...........(6)V6 = (1/4πε) (q6/d) ...........(7)The net electric potential at P is given by the sum of all the potentials.
Therefore,VP = V1 + V2 + V3 + V4 + V5 + V6 ...........(8)Substituting the given values in equations (2) to (7), we get,V1 = (1/4πε) (3.8 x 10⁻⁶/9.1) = 1.35 x 10⁹ VV2 = (1/4πε) (3.8 x 10⁻⁶/9.1) = 1.35 x 10⁹ VV3 = (1/4πε) (2.5 x 10⁻⁶/9.1) = 8.85 x 10⁸ VV4 = (1/4πε) (6 x 10⁻⁶/9.1) = 2.12 x 10⁹ VV5 = (1/4πε) (4.6 x 10⁻⁶/9.1) = 1.64 x 10⁹ VV6 = (1/4πε) (8.6 x 10⁻⁶/9.1) = 3.06 x 10⁹ V.
Substituting these values in equation (8), we get,VP = 1.35 x 10⁹ + 1.35 x 10⁹ + 8.85 x 10⁸ + 2.12 x 10⁹ + 1.64 x 10⁹ + 3.06 x 10⁹= 13.47 x 10⁹ VTherefore, the net electric potential at P due to charges q1, q2, q3, q4, q5, q6 is 13.47 x 10⁹ V when V = 0 at infinity and d = 9.1 m. Answer: 13.47 x 10⁹ V.equations
Learn more about equations here,
https://brainly.com/question/29174899
#SPJ11
When this astronaut goes
back to Earth, what will
happen?
A. His weight will increase.
B. His mass will increase.
C. Both his mass and weight will decrease.
Answer: A
Explanation: The mass of a thing never changes but weight is the act of gravity on mass. This rules out B and C since mass can’t change. Leaving A as the only possible answer.
A toaster is rated at 660 W when connected to a 220 V source. What current does the toaster carry? A. 2.0 A B. 2.5 A C. 3.0 A D. 3.5 A
The given toaster is rated at 660 W when it is connected to a 220 V source. We can find the current that the toaster as follows,
P = VI or I=P/V, where P is the power, V is the voltage, I is the current
So, I=660/220
I=3A
Therefore, the current that the toaster carries C. 3.0 A.
Explore a similar question: https://brainly.com/question/24858512
#SPJ11
If an electron (mass =9.1×10 −31
kg ) is released at a speed of 4.9×10 5
m/s in a direction perpendicular to a uniform magnetic field, then moves in a circle of radius 1.0 cm, what must be the magnitude of that field? μTx
The magnitude of the field is 1.41 × 10^-3 T.
When a charged particle moves in a magnetic field perpendicular to the magnetic field, the Lorentz force acts as a centripetal force causing the charged particle to move in a circle. The centripetal force is given by the relation: F = ma = (mv²)/r.
Where m is the mass of the charged particle, v is the velocity of the charged particle, r is the radius of the circle and a is the acceleration of the charged particle due to the magnetic field.Based on the information given in the question;Mass of the electron, m = 9.1 × 10^-31 kgVelocity of the electron, v = 4.9 × 10^5 m/s.
Radius of the circle, r = 1.0 cm = 0.01 mThe force acting on the electron due to the magnetic field is given by the relation: F = qvB. Where q is the charge of the electron, v is the velocity of the electron and B is the magnetic field strength.
Since the force acting on the electron is the centripetal force, equating these two forces we get: F = mv²/r = qvB. Therefore, B = mv/rq = (9.1 × 10^-31 kg × (4.9 × 10^5 m/s))/((0.01 m) × 1.6 × 10^-19 C) = 1.41 × 10^-3 T.So, the magnitude of the magnetic field is 1.41 × 10^-3 T.Answer: The magnitude of the field is 1.41 × 10^-3 T.
Learn more about magnitude here,
https://brainly.com/question/30337362
#SPJ11
An LED (Light Emitting Diode) is constructed from a p-n junction based on a certain semi-conducting material with a band gap of 1.61 eV. What is the wavelength of the emitted light? Give your answer to the closest nm (no decimal places). Do not include the units.
The light-emitting diode (LED) is a two-terminal semiconductor light source used as a light source in lighting. The wavelength of the emitted light from the LED is 1240.
An LED (light-emitting diode) is made up of a p-n junction made of a particular semiconducting substance with a bandgap of 1.61 eV. The wavelength of the emitted light is given in this question and needs to be calculated.
The energy of the photon is related to the wavelength λ by the formula,
E = hc/λ
where E is the photon energy, h is Planck's constant, and c is the speed of light.
The formula can be modified to find the wavelength of the emitted light:
λ = hc/E
where λ is the wavelength, h is Planck's constant, c is the speed of light, and E is the energy of a photon.
The energy gap of the p-n junction of an LED determines the energy and frequency of the photon emitted.
The energy gap is given in the question to be 1.61 eV.
h and c are constants that are well-known.
The value of h is 6.626 x 10-34 joule-second, and c is 2.998 x 108 meter/second.
Substituting the values,
λ = hc/Eλ
= (6.626 x 10-34) x (2.998 x 108) / (1.61 x 1.6 x 10-19)λ
= 1.24 x 10-6 meter
= 1240 nm
Therefore, the wavelength of the emitted light from the LED is 1240 nm.
Learn more about semiconductor: https://brainly.com/question/30762286
#SPJ11
Which of the following statements are IMPOSSIBLE? Choose all that apply.
L
The rocket's speed was measured to be 0.7c.
U The rocket's rest length is 580 m. An observer flying by measured the rocket to be 124 m long.
A rocket flying away from the Sun at 0.45c measured the speed of the photons (particles of light) emitted by the Sun to be c.
U An inertial reference frame had an acceleration of 1 m/s?.
U The proper time interval between two events was measured to be 294 s. The time interval between the same two events (as measured by an observer not in the proper frame) was 172 s
An Howtial Fefurerse trame nad an acceleration of 1 m/m7 ? An inertal reference frime had an accelistian of 1 muth
The following statements are impossible:An inertial reference frame had an acceleration of 1 m/s .
2.U An inertial reference frame had an acceleration of 1 m/s?.
How do you define Special Theory of Relativity?
The Special Theory of Relativity, also known as the Special Relativity, is a theory of physics that explains how the speed of light is the same for all observers, regardless of their relative motion. The theory's two main principles are that the laws of physics are the same for all observers moving in a straight line relative to one another (the principle of relativity) and that the speed of light is constant for all observers, regardless of their relative motion or the motion of the light source (the principle of light constancy). Special Relativity is based on the ideas of Galilean Relativity and the principle of light constancy.
What is the significance of Special Theory of Relativity?
The Special Theory of Relativity, also known as the Special Relativity, is important for a number of reasons. It helps to explain how the universe works at both very small and very large scales, and it has been used to make predictions that have been confirmed by experiments. Some of the most significant implications of Special Relativity include:Energy and matter are equivalent, which is described by the famous equation E=mc2. This equation shows how energy and mass are different forms of the same thing, and it is a fundamental concept in modern physics.
The speed of light is the same for all observers, regardless of their relative motion. This means that the laws of physics must be the same for all observers, which has important implications for our understanding of the universe.
Learn more about motion here,
https://brainly.com/question/26083484
#SPJ11
a) The general form of Newton's Law of cooling is: T(t) = Ta +(T(0) – Tale-ke where T is the temperature at any time, t in minutes. Ta is the surrounding ambient temperature in °C and k is the cooling con- stant. Consider a cup of coffee at an initial temperature, T(0) of 80°C placed into the open air at 15°C. After 5 minutes the coffee cools to 65°C. Using these initial conditions: i) Calculate the cooling constant, k. ii) What will be the temperature of the coffee after exactly 13 minutes? iii) How long will it take for the coffee to reach 25°C?
i) The cooling constant (k) is approximately 0.6667.
ii) After exactly 13 minutes, the temperature of the coffee will be around 19.3°C.
iii) It will take approximately 43.7 minutes for the coffee to reach a temperature of 25°C.
i) To calculate the cooling constant (k):
k = (T(0) - Ta - T(t)) / (T(t) - Ta)
= (80 - 15 - 65) / (65 - 15)
= 0.6667
ii) To find the temperature of the coffee after exactly 13 minutes, we can substitute t = 13, T(0) = 80, Ta = 15, and k = 0.6667 into the Newton's Law of cooling equation:
T(13) = 15 + (80 - 15 - 15)e(-0.6667*13) ≈ 19.3°C
iii) To determine the time required for the coffee to reach 25°C:
t = ln((T(0) - Ta) / (T(0) - T)) / k
= ln((80 - 15) / (80 - 25)) / 0.6667
≈ 43.7 minutes
learn more about Temperature here:
https://brainly.com/question/32515222
#SPJ4
A 0.045 kg tennis ball travelling east at 15.5 m/s is struck by a tennis racquet, giving it a velocity of 26.3 m/s, west. What are the magnitude and direction of the impulse given to the ball? Define the magnitude and for direction if it is west, consider stating the negative sign, otherwise do not state it. Record your answer to two digits after the decimal point. No units Your Answer: Answer D Add attachments to support your work A 67.7 kg athlete steps off a h=13.3 m high platform and drops onto a trampoline. As the trampoline stretches, it brings him to a stop d=1.4 m above the ground. How much energy must have been momentarily stored in the trampoline when he came to rest? Hint: it is coming to rest at height d=1.4 m from the ground. Round your answer to two digits after the decimal point. No units Your Answer: Answer A stationary object explodes into two fragments. A 5.83 kg fragment moves westwards at 2.82 m/s. What are the kinetic energy of the remaining 3.24 kg fragment? Consider the sign convention: (E and N+ and W and S− ) Round your answer to two digits after the decimal point. No units Your Answer: Answer A 2180 kg vehicle travelling westward at 45.4 m/s is subjected to a 2.84×104 N⋅s impulse northward. What is the direction of the final momentum of the vehicle? State the angle with the horizontal axes Round your answer to two digits after the decimal point. No units Your Answer: Answer
1. Magnitude of the impulseThe initial momentum of the tennis ball is given bym1v1 = 0.045 kg × 15.5 m/s = 0.6975 kg·m/sThe final momentum of the tennis ball is given bym1v2 = 0.045 kg × (-26.3 m/s) = -1.1835 kg·m/sTherefore, the change in momentum is given byΔp = p2 - p1= (-1.1835) - (0.6975)= -1.881 kg·m/sThe magnitude of the impulse is the absolute value of the change in momentum, which is|Δp| = |-1.881| = 1.881 kg·m/s(rounded to two decimal places).
2. Direction of the impulseThe impulse is in the opposite direction to the change in momentum, which is westward. Therefore, the direction of the impulse is eastward.Note that if we use a positive sign convention for eastward and a negative sign convention for westward, then the direction of the impulse can be expressed as-1.881 J (eastward).
3. Stored energy on the trampolineThe athlete loses gravitational potential energy (GPE) when stepping off the platform. This energy is converted into elastic potential energy (EPE) as the trampoline stretches. Therefore,GPE = EPEGPE lost = mghwhere m is the mass of the athlete, g is the acceleration due to gravity, and h is the height of the platform above the ground.GPE lost = 67.7 kg × 9.8 m/s² × 13.3 m = 93506.62 JWhen the athlete is at the maximum height d above the ground, all of the GPE is converted into EPE. Therefore,EPE stored = GPE lost = 93506.62 JWhen the athlete comes to rest, all of the EPE is converted back into GPE. Therefore,GPE gained = EPE stored = 93506.62 JWhen the athlete is at a height of d = 1.4 m above the ground,GPE gained = mghGPE gained = 67.7 kg × 9.8 m/s² × 1.4 m = 929.012 JTherefore, the energy momentarily stored in the trampoline when the athlete came to rest was 929.012 J (rounded to two decimal places).
4. Kinetic energy of the remaining fragmentIf the initial kinetic energy of the object is K1 and the kinetic energy of one of the fragments is K2, thenK1 = K2 + K3where K3 is the kinetic energy of the other fragment.Since the object is stationary before the explosion, its initial kinetic energy is zero. Therefore,K2 + K3 = 0andK2 = - K3The kinetic energy of the remaining 3.24 kg fragment (K2) is given byK2 = (1/2) m2 v²where m2 is the mass of the remaining fragment, and v is its velocity.K2 = (1/2) × 3.24 kg × (2.82 m/s)²K2 = 10.8748 JTherefore, the kinetic energy of the remaining 3.24 kg fragment is 10.8748 J (rounded to two decimal places).
5. Direction of the final momentumThe initial momentum of the vehicle is given byp1 = m1v1where m1 is the mass of the vehicle, and v1 is its velocity.p1 = 2180 kg × (-45.4 m/s)p1 = -99172 kg·m/sThe impulse acting on the vehicle is given byJ = Δpp2 - p1 = (0, Jy, 0)where Jy is the y-component of the impulse. Since the impulse is northward, Jy is positive.The final momentum of the vehicle is given byp2 = p1 + Jp2 = (-99172, Jy, 0)The magnitude of the final momentum is given by|p2| = √(p²x + p²y + p²z)|p2| = √((-99172)² + J²).The direction of the final momentum is given by the angle θ between the final momentum and the horizontal axis, measured counterclockwise from the positive x-axis.tan(θ) = p2y / p2xθ = tan⁻¹(p2y / p2x)θ = tan⁻¹(Jy / (-99172))Therefore, the direction of the final momentum is (rounded to two decimal places).
Learn more about Magnitude here,
https://brainly.com/question/30337362
#SPJ11
Suppose a 9.00 V CD player has a transformer for converting current in a foreign country. If the ratio of the turns of wire on the primary to the secondary coils is 22.5 to 1, what is the outlet potential difference? ____V
The outlet potential difference, after the voltage transformation by the transformer, is approximately 0.4 V.
The transformer in the CD player is used to convert the voltage from the foreign country's electrical system to a voltage suitable for the CD player. The transformer operates based on the principle of electromagnetic induction, where the ratio of turns on the primary coil to the secondary coil determines the voltage transformation.
Given:
Voltage on the primary coil (Vp) = 9.00 V
Turns ratio (Np/Ns) = 22.5/1
The turns ratio represents the ratio of the number of turns on the primary coil (Np) to the number of turns on the secondary coil (Ns).
To find the outlet potential difference, we can use the turns ratio equation:
Vp/Vs = Np/Ns
Substituting the given values:
9.00 V/Vs = 22.5/1
Now, we can solve for Vs (the outlet potential difference):
Vs = (9.00 V) / (22.5/1)
Vs = 0.4 V
To know more about primary coil (Np)
https://brainly.com/question/12000388
#SPJ11
‒‒‒‒‒‒‒‒‒‒ A man pulls a 77 N sled at constant speed along a horizontal snow surface. He applies a force of 80 N at an angle of 53° above the surface. What is the normal force exerted on the sled? Q141N 77 N 64 N 13 N
The normal force exerted on the sled is 77N. The normal force is the force exerted by a surface perpendicular to the object resting on it.
In this scenario, the man is pulling the sled at a constant speed along a horizontal snow surface. The force he applies is 80 N at an angle of 53° above the surface. To determine the normal force exerted on the sled, we need to consider the forces acting on it.
The normal force is the force exerted by a surface perpendicular to the object resting on it. In this case, since the sled is on a horizontal surface, the normal force is directed vertically upwards to counteract the force of gravity. Since the sled is not accelerating vertically, the normal force is equal in magnitude but opposite in direction to the gravitational force acting on it.
The weight of the sled can be calculated using the equation F = mg, where m is the mass of the sled and g is the acceleration due to gravity (approximately [tex]9.8 m/s^2[/tex]). The weight of the sled is therefore 77 N. Since the sled is not accelerating vertically, the normal force exerted on it must be equal to its weight, which is 77 N.
Learn more about forces here:
https://brainly.com/question/13191643
#SPJ11
A circuit connects battery to three light bulbs in parallel. In other words, all the light bulbs are in parallel with one another, and in parallel with the battery. What happens to the circuit if one of the light bulb burns out? Why? A. Total resistance increases, other bulbs get brighter B. Total resistance increases, other bulbs get dimmer C. Total resistance increases, brightness of other bulbs does not change D. All the bulbs go out E. Total resistance decreases, other bulbs get brighter F. Total resistance decreases, other bulbs get dimmer G. Total resistance decreases, brightness of other bulbs does not change
If one of the light bulb burns out, Total resistance increases, other bulbs get dimmer. The circuit would not be broken if one of the bulbs burns out. This is the effect of a parallel circuit when one component fails. Therefore. the correct answer is option B.
In a parallel circuit, each device operates independently. As a result, if one component fails, it does not cause the others to stop working. However, since the resistance of each bulb is fixed, the total resistance of the circuit decreases as bulbs are added.
When a bulb burns out, the resistance of the circuit rises, making the other bulbs dimmer. Because the current in a parallel circuit is divided among the components, the current flowing through each remaining bulb would decrease if one bulb burns out.
So, if one bulb fails, the voltage across it would drop, and it would get dimmer. That's why in parallel circuit the bulbs are installed in parallel to ensure that they function independently of each other. So, option B is the correct answer.
To learn more about resistance: https://brainly.in/question/19540047
#SPJ11
The correct answer is: A,Aω,Aω2 The position of an object moving in simple harmonic motion is given by the equation x(t)=Asin(ωt+θ), where A=−3.7 m, at=2.0rad/s and θ=0.20rad. What is the speed of the object when it is at x=−1.5 m ? Select one: a. 7.0 m/s b. 6.8 m/s c. 3.8 m/s d. 3.4 m/s Take the denvative of x(t) to find the velocity as a function of tate: x(t)=Asin(ωt+θ)v(t)=dtdx
The speed of the object when it is at x = -1.5 m is 7.0 m/s. Answer: a. 7.0 m/s.
Given data,A = -3.7 mω = 2.0 rad/st = ?θ = 0.20 radWe know that velocity as a function of time is given by the derivative of position as a function of time, that is,v(t) = d/dt [x(t)]v(t) = d/dt [Asin(ωt + θ)]v(t) = Aω cos(ωt + θ)Now, the position of the object is given byx(t) = Asin(ωt + θ)Now, substituting the given values, we getx(t) = -3.7 sin(2t + 0.20) mNow, the object is at x = -1.5 mHence, -1.5 = -3.7 sin(2t + 0.20)Solving for t, we gett = 0.835 sNow, substituting t = 0.835 s in the equation of velocity as a function of time, we getv(t) = Aω cos(ωt + θ)v(t) = -3.7 × 2.0 cos(2(0.835) + 0.20) m/sv(t) = -7.0 m/sTherefore, the speed of the object when it is at x = -1.5 m is 7.0 m/s. Answer: a. 7.0 m/s.
Learn more about Velocity here,
https://brainly.com/question/80295
#SPJ11
If 200 m away from an ambulance siren the sound intensity level is 65 dB, what is the sound intensity level 20 m away from that ambulance siren? Specify your answer in units of decibel (dB). \begin{tabular}{|llllll} \hline A: 75 & B: 80 & C: 85 & D: 90 & E: 95
The sound intensity level at 20 m from the ambulance siren is:x = 2.5 dB
The given problem states that the sound intensity level at a distance of 200 m from an ambulance siren is 65 dB and we need to calculate the sound intensity level at 20 m from the siren. Let us assume that the sound intensity level at a distance of 20 m from the siren be x dB.
Now we know that the sound intensity level at any point is given by the following formula: IL = 10log(I/I0), where I is the sound intensity and I0 is the threshold of hearing, which is equal to 10^-12 W/m^2.
So the sound intensity level 200 m away from the ambulance siren, which is 65 dB, can be written as:
65 = 10log(I/10^-12)
65/10 = log(I/10^-12)
6.5 = log(I/10^-12)I/10^-12 = antilog(6.5)I/10^-12 = 3.162 * 10^-7 W/m^2
Similarly, the sound intensity level at a distance of 20 m from the ambulance siren, which is x dB, can be written as:x = 10log(I/10^-12)x/10 = log(I/10^-12)x/10 = log(I) - log(10^-12)x/10 = log(I) + 12/10x/10 - 12 = log(I)I/10^-12 = antilog(x/10 - 12)I/10^-12 = 10^(x/10) * 10^-12 W/m^2
Since the sound intensity level remains constant, the sound intensity at a distance of 200 m and 20 m is the same. Therefore, equating the above two expressions, we get:3.162 * 10^-7 = 10^(x/10) * 10^-12 3.162 = 10^(x/10)10^(x/10) = 3.162
Taking the logarithm of both sides, we get:x/10 = log(3.162)x/10 = 0.5x = 5log(3.162)x = 5 * 0.5x = 2.5
Therefore, the sound intensity level at 20 m from the ambulance siren is:x = 2.5 dB
Sound intensity level at 20 m from the ambulance siren is 2.5 dB.
Answer: 2.5 dB
Know more about sound intensity here,
https://brainly.com/question/32194259
#SPJ11
A source emits monochromatic light of wavelength 558 nm in air. When the light passes through a liquid, its wavelength reduces to 420 nm. (a) What is the liquid's index of refraction? (b) Find the speed of light in the liquid. m/s
Dividing the wavelength in air (558 nm) by the wavelength in the liquid (420 nm) will give the refractive index. The liquid's index of refraction is 1.33. The speed of light in liquid is [tex]2.26 x 10^8 m/s.[/tex]
(a) To calculate the refractive index of the liquid, we can use the formula: n = λ_air / λ_liquid
Substituting the given values of λ_air = 558 nm and λ_liquid = 420 nm into the formula, we have:
n = [tex]\frac{558}{420}[/tex]
Calculating the value:
n = 1.33
Therefore, the index of refraction of the liquid is approximately 1.33.
(b) To find the speed of light in the liquid, we can use the equation:
v = c / n
where v is the speed of light in the medium, c is the speed of light in a vacuum, and n is the index of refraction of the medium.
v = [tex]\frac{(3.0 x 10^8 m/s)}{1.33}[/tex]
Calculating the value:
v ≈ [tex]2.26 x 10^8 m/s[/tex]
Therefore, the speed of light in the liquid is approximately [tex]2.26 x 10^8 m/s.[/tex]
Learn more about refractive index here:
https://brainly.com/question/30761100
#SPJ11
A truck with a mass of 1890 kg and moving with a speed of 14.5 m/s rear-ends a 791 kg car stopped at an intersection. The con i cortes neutral, the brakes are off, the metal bumpers line up well and do not get damaged. Find the speed of both vehicles afer the common in meter per cond car
Answer:
The speed of both vehicles after the collision is approximately 14.5 m/s.
Given:
Mass of the truck (m1) = 1890 kg
Mass of the car (m2) = 791 kg
Initial velocity of the truck (v1) = 14.5 m/s
Initial velocity of the car (v2) = 0 m/s (since it is stopped)
Let's denote the final velocity of the truck as v1' and the final velocity of the car as v2'.
Using the conservation of momentum, we can write:
(m1 * v1) + (m2 * v2) = (m1 * v1') + (m2 * v2')
Plugging in the given values:
(1890 kg * 14.5 m/s) + (791 kg * 0 m/s)
= (1890 kg * v1') + (791 kg * v2')
27345 kg·m/s = 1890 kg * v1' + 0 kg·m/s
Now, we can solve for the final velocity of the truck (v1'):
1890 kg * v1' = 27345 kg·m/s
v1' = 27345 kg·m/s / 1890 kg
v1' ≈ 14.5 m/s
The final velocity of the truck (v1') after the collision is approximately 14.5 m/s.
Since the bumpers line up well and no external forces act on the system, the final velocity of the car (v2') will be equal to the final velocity of the truck:
v2' ≈ 14.5 m/s
Therefore, the speed of both vehicles after the collision is approximately 14.5 m/s.
Learn more about conservation of momentum,here
https://brainly.com/question/32309314
It was found that an EM wave is comprised of individual spherical particles. These spherical paticles form the resulting wowe-foont This coss Critical angle Snell's Law Wave cavity Brewster's Angle Coulomb's Law wavegulde Huygens ndividual sphencal particles. These spherical particles form the resulting wave-front. This observation is known as...
The phenomenon of EM waves composed of individual spherical particles that form the resulting wavefront is referred to as Huygens Principle.
Christiaan Huygens was a Dutch scientist who suggested in 1678 that every point on the primary wavefront acts as a source of secondary waves. These secondary waves are spherical waves that propagate at the same speed and frequency as the primary wave, but with different amplitudes and phases.Huygens principle aids in determining how waves behave when they interact with obstacles. It allows us to predict how a wave will propagate through a given geometry by imagining it as the sum of secondary wavelets produced by the primary wave.
To know more about wave visit:
https://brainly.com/question/14082910
#SPJ11
Calculate the amplitude of the motion. An object with mass 3.2 kg is executing simple harmonic motion, attached to a spring with spring constant 310 N/m. When the object is 0.019 m from its equilibrium position, it is moving with a speed of 0.55 m/s. Express your answer to two significant figures and include the appropriate units. Mi ) ?Calculate the maximum speed attained by the object. Express your answer to two significant figures and include the appropriate units.
The maximum speed attained by the object is approximately 0.19 m/s. To calculate the amplitude of the motion, we can use the formula:
A = [tex]x_{max[/tex]
where A is the amplitude and [tex]x_{max[/tex] is the maximum displacement from the equilibrium position.
Given that the object is 0.019 m from its equilibrium position, we can conclude that the amplitude is also 0.019 m.
So, the amplitude of the motion is 0.019 m.
To calculate the maximum speed attained by the object, we can use the equation:
[tex]v_{max[/tex] = ω * A
where [tex]v_{max[/tex] is the maximum speed, ω is the angular frequency, and A is the amplitude.
The angular frequency can be calculated using the formula:
ω = √(k / m)
where k is the spring constant and m is the mass.
Given that the spring constant is 310 N/m and the mass is 3.2 kg, we can calculate ω:
ω = √(310 N/m / 3.2 kg)
≈ √(96.875 N/kg)
≈ 9.84 rad/s
Now we can calculate the maximum speed:
[tex]v_{max[/tex] = 9.84 rad/s * 0.019 m
≈ 0.19 m/s
Therefore, the maximum speed attained by the object is approximately 0.19 m/s.
To learn more about maximum speed visit:
brainly.com/question/10236290
#SPJ11
Sketch and label the equivalent circuit of DC series motor and DC compound generator b) A 220 V DC series motor runs at 800 rpm and takes 30A. The value of the armature and field resistance are 0.6 ≤ and 0.8 №, respectively. Determine: i. The back EMF. a) ii. iii. The torque developed in the armature. The output power if rotational losses are 250 W.
In the case of the DC series motor, the back EMF of the motor is 202 V.
The equivalent circuit of a DC series motor and DC compound generator can be represented as follows:
The armature resistance (Ra) is connected in series with the armature winding.
The field resistance (Rf) is connected in series with the field winding.
The back electromotive force (EMF) (Eb) opposes the applied voltage (V).
For the specific case mentioned:
Given:
Applied voltage (V) = 220 V
Speed (N) = 800 rpm
Current (I) = 30 A
Armature resistance (Ra) = 0.6 Ω
Field resistance (Rf) = 0.8 Ω
To calculate the back EMF (Eb) of the motor, we can use the following formula:
Eb = V - I * Ra
Substituting the given values:
Eb = 220 V - 30 A * 0.6 Ω
= 220 V - 18 V
= 202 V
To know more about armature resistance, here
brainly.com/question/32332966
#SPJ4
--The complete Question is, What is the equivalent circuit of a DC series motor and DC compound generator? In a specific case, a 220 V DC series motor runs at 800 rpm and draws a current of 30A. The armature resistance is 0.6 Ω, and the field resistance is 0.8 Ω. Calculate the back EMF of the motor.--
Buck - Boost converter system parameters: Vg=48V input voltage, output voltage Vo=12V, output load R=1~100Ω, output filter inductance L=100μH, capacitance C=220μF, switch frequency fsw=40kHz, namely switch cycle Tsw=25μs. PWM modulator sawtooth amplitude VM=2.5V. Feedback current network transfer function Hi(s)=1 feedback partial voltage network transfer function Hv(s)=0.5
Draw the circuit and give Detailed derivation of the transfer function.
The Buck-Boost converter system consists of an input voltage of 48V, an output voltage of 12V, and various parameters such as load resistance, filter inductance, capacitance, switch frequency, and PWM modulator sawtooth amplitude. The feedback current network transfer function is given as Hi(s) = 1, and the feedback partial voltage network transfer function is Hv(s) = 0.5. The circuit diagram and transfer function derivation will be explained in detail.
The Buck-Boost converter is a DC-DC power converter that can step up or step down the input voltage to achieve the desired output voltage. Here is a step-by-step explanation of the circuit and the derivation of the transfer function:
1. Circuit Diagram: The circuit consists of an input voltage source (Vg), an inductor (L), a switch (S), a diode (D), a capacitor (C), and the load resistance (R). The PWM modulator generates a sawtooth waveform (VM) used for switching control.
2. Operation: During the switch ON period, energy is stored in the inductor. During the switch OFF period, the stored energy is transferred to the output.
3. Transfer Function Derivation: To derive the transfer function, we analyze the circuit using small-signal linearized models and Laplace transforms.
4. Voltage Transfer Function: By applying Kirchhoff's voltage law and using the small-signal model, we can derive the voltage transfer function Vo(s)/Vg(s) as a function of the circuit components.
5. Current Transfer Function: Similarly, by analyzing the current flow in the circuit, we can derive the current transfer function Io(s)/Vg(s) as a function of the circuit components.
6. Feedback Transfer Functions: The given feedback transfer functions, Hi(s) and Hv(s), relate the feedback current and voltage to the input voltage.
7. Overall Transfer Function: The overall transfer function of the Buck-Boost converter system can be obtained by combining the voltage transfer function, current transfer function, and feedback transfer functions.
By following these steps, the detailed derivation of the transfer function for the Buck-Boost converter system can be obtained. The transfer function describes the relationship between the input voltage and the output voltage, and it helps in analyzing and designing the converter system for the desired performance.
To know more about the Buck-Boost click here:
https://brainly.com/question/30776258
#SPJ11
A parallel-plate capacitor has plates of dimensions 2.0 cm by 3.0 cm separated by a 1.0- olaviomm thickness of dielectric material (k = 11.1), what is its capacitance? C. 60 pF D. 80 pF A. 20 pF B. 40 pF 5. A spherical liquid drop of radius R has a capacitance of C = 4πER. If two such drops combine to form a single larger drop, what is its capacitance? A A. 2 C B. C C. 1.26 C D. 1.46 C
The capacitance of the parallel-plate capacitor is approximately 5.31 x 10⁻¹¹ F or 53.1 pF. To find the capacitance of a parallel-plate capacitor, we can use the formula:
C = (ε₀ * εᵣ * A) / d
where:
C is the capacitance,
ε₀ is the vacuum permittivity (8.854 x 10⁻¹² F/m),
εᵣ is the relative permittivity or dielectric constant (given as 11.1),
A is the area of the plates (2.0 cm by 3.0 cm = 0.02 m * 0.03 m = 0.0006 m²),
d is the separation between the plates (1.0 mm = 0.001 m).
Plugging in the values, we have:
C = (8.854 x 10⁻¹² F/m * 11.1 * 0.0006 m²) / 0.001 m
= 5.31 x 10⁻¹¹ F
Therefore, the capacitance of the parallel-plate capacitor is approximately 5.31 x 10⁻¹¹ F or 53.1 pF.
For the second part of the question, when two identical drops combine to form a larger drop, the total capacitance is given by the sum of the individual capacitances:
C_total = C1 + C2
Since each individual drop has a capacitance of C, we have:
C_total = C + C = 2C
Therefore, the capacitance of the single larger drop formed by combining two identical drops is 2 times the original capacitance, which is 2C. In this case, it is given that C = 4πER, so the capacitance of the single larger drop is 2 times that:
C_total = 2C = 2(4πER) = 8πER
Hence, the capacitance of the single larger drop is 8πER.
To know more about the vacuum permittivity
brainly.com/question/31484434
#SPJ11
A wire has a resistance of 17.2Ω. It is melted down, and from the same volume of metal a new wire is made that is 2 times longer than the original wire. What is the resistance of the new wire? Number Units
A wire has a resistance of 17.2Ω. It is melted down, and from the same volume of metal a new wire is made that is 2 times longer than the original wire. the resistance of the new wire is 34.4 Ω.
The resistance of a wire is directly proportional to its length and inversely proportional to its cross-sectional area. Given that the volume of metal used remains the same, we can assume that the cross-sectional area of the new wire is the same as that of the original wire.
Let's denote the length of the original wire as L and its resistance as R. The length of the new wire is 2L, and we need to find its resistance, which we can denote as R'.
The resistance of a wire is given by the formula:
R = (ρ * L) / A,
where ρ is the resistivity of the material, L is the length of the wire, and A is the cross-sectional area.
Since the cross-sectional area is the same for both wires, we can write:
R' =(ρ * 2L) / A.
To find the relationship between R and R', we can divide the equation for R' by the equation for R:
R' / R = (ρ * 2L) / A * (A / (ρ * L)).
Simplifying the expression, we get:
R' / R = 2.
Therefore, the resistance of the new wire is twice the resistance of the original wire.
Applying this to the given resistance of the original wire (17.2 Ω), the resistance of the new wire is:
R' = 2 * 17.2 Ω = 34.4 Ω.
Hence, the resistance of the new wire is 34.4 Ω.
Learn more about resistance here:
https://brainly.com/question/17010736
#SPJ11
A transformer is used to step down 160 V from a wall socket to 9.1 V for a radio. (a) If the primary winding has 600 turns, how many turns does the secondary winding have?_____ turns (b) If the radio operates at a current of 480 mA, what is the current (in mA) through the primary winding? ____mA
(a) If the primary winding has 600 turns, how many turns does the secondary winding have? 34 turns (b) If the radio operates at a current of 480 mA, what is the current (in mA) through the primary winding? 27.2 mA.
(a) Given that the primary winding has 600 turns and the voltage across the primary winding is 160 V, and the voltage across the secondary winding is 9.1 V, we can calculate the number of turns in the secondary winding (N2) as follows: Picture is given below.
Therefore, the secondary winding has approximately 34 turns.
(b)To find the current through the primary winding, we can use the current ratio equation:
[tex]\frac{I1}{I2}[/tex] = [tex]\frac{N2}{N1}[/tex]
where I1 and I2 re the currents through the primary and secondary windings respectively, and N1 and N2are the number of turns in the primary and secondary windings respectively.
Given that the current through the secondary winding (I2) is 480 mA, and the number of turns in the primary winding (N1) is 600, we can calculate the current through the primary winding (I1) as follows: Picture is given below.
Therefore, the current through the primary winding is approximately 27.2 mA.
To know more baout primary winding
https://brainly.com/question/28335926
#SPJ11
A spherical UFO streaks across the sky at a speed of 0.90c relative to the earth. A person on earth determines the length of the UFO to be 230 m along the direction of its motion. State the ship's dimensions in the x- and y-axis as its travelling and when it lands (you must solve for the length/diameter of the ship).
The ship's dimensions in the x-axis are approximately 676.2 m (length) and D₀ (diameter), and its dimensions in the y-axis remain the same as D₀ when it is moving and when it lands.
To solve for the dimensions of the ship along the x- and y-axis, we can use the concept of length contraction in special relativity. According to special relativity, objects moving at high speeds relative to an observer undergo length contraction in the direction of their motion.
Let's denote the ship's dimensions in its rest frame (ship's frame) as L₀ (length) and D₀ (diameter). We want to find the dimensions of the ship as observed by a person on Earth when it is moving at a speed of 0.90c.
The length contraction factor, γ, can be calculated using the Lorentz factor:
γ = 1 / sqrt(1 - (v/c)^2)
Where v is the velocity of the ship and c is the speed of light.
Given that v = 0.90c, we can calculate γ:
γ = 1 / sqrt(1 - (0.90)^2)
Using a calculator, we find γ ≈ 2.94.
Now, let's consider the length contraction along the direction of motion (x-axis):
L = L₀ / γ
Substituting the given length (L) as 230 m, we can solve for L₀:
230 m = L₀ / 2.94
Solving for L₀, we find L₀ ≈ 676.2 m.
Therefore, the ship's length in its frame is approximately 676.2 m.
Next, let's consider the diameter along the y-axis. According to length contraction, there is no contraction in directions perpendicular to the motion. Therefore, the diameter of the ship remains the same:
D = D₀
Since no length contraction occurs along the y-axis, the ship's diameter remains unchanged.
The ship's dimensions in the x-axis are approximately 676.2 m (length) and D₀.
To know more about velocity
https://brainly.com/question/30559316
#SPJ11
A projectile is fired with an initial velocity of 46.82m/s at an angle of 41.89°. It hits a target 1.09s later. How high (vertically) is the target?
Notes: Remember, a = g. Don't forget the units!
A projectile is fired with an initial velocity of 46.82m/s at an angle of 41.89°. It hits a target 1.09s later. The target is approximately 56.26 meters below the initial launch height.
To determine the vertical height of the target, we can analyze the projectile's motion and apply the equations of motion.
Let's break down the initial velocity into its vertical and horizontal components. The vertical component (Vy) can be found using the equation:
Vy = V × sin(θ)
where V is the initial velocity (46.82 m/s) and θ is the launch angle (41.89°). Plugging in the values:
Vy = 46.82 m/s × sin(41.89°)
≈ 29.70 m/s
Next, we can determine the time it takes for the projectile to reach its maximum height (t_max). At the highest point of the projectile's trajectory, the vertical velocity becomes zero. We can use the equation:
Vy = Vy_initial + g × t_max
where g is the acceleration due to gravity (approximately 9.8 m/s^2). Plugging in the values:
0 = 29.70 m/s - 9.8 m/s^2 × t_max
Solving for t_max:
t_max = 29.70 m/s / 9.8 m/s^2
≈ 3.03 s
Since the total time of flight is given as 1.09 s, we can calculate the time it takes for the projectile to descend from its maximum height to hit the target:
t_descent = total time of flight - t_max
= 1.09 s - 3.03 s
≈ -1.94 s
The negative sign indicates that the projectile has already descended from its maximum height when it hits the target.
Now, let's find the vertical distance traveled during the descent. We can use the equation:
Δy = Vy_initial × t_descent + (1/2) × g × t_descent^2
Plugging in the values:
Δy = 29.70 m/s × (-1.94 s) + (1/2) × 9.8 m/s^2 × (-1.94 s)^2
≈ -56.26 m
The negative sign indicates that the target is located below the initial launch height. To find the actual vertical height of the target, we take the absolute value of Δy:
Vertical height of the target = |Δy|
≈ 56.26 m
Therefore, the target is approximately 56.26 meters below the initial launch height.
To learn more about projectile's motion visit: https://brainly.com/question/24216590
#SPJ11
Two identical balls of clay are positioned such that one piece is located 4.8 meters directly above the other, which is on the ground. The upper piece of clay is released from rest while the lower one is shot straight up from the ground at a speed of 6 m/s. When the clay balls collide, they stick together. Find the speed of the balls when they strike the ground together.
Please explain thoroughly, some solutions do not explain. Please
Given that: The height of the ball above the ground, h = 4.8 metersThe initial velocity of the lower ball, u = 6 m/sNow, the initial velocity of the upper ball = 0 m/s, because it is released from rest.
Both the balls have the same mass and collide inelastically, which means the total momentum of the system is conserved. Let v be the velocity of the combined mass of both the balls after the collision. Since the momentum of the system is conserved, we can write the equation as:mu + 0 = (mu + mv)vWhere,m is the mass of each ballu is the initial velocity of the lower ballv is the velocity of the combined mass of both the balls after the collision.
Therefore,v = u/2 = 6/2 = 3 m/sThis is the velocity with which the combined mass of both the balls moves upwards after the collision. Now we can find the time, T it takes to reach the maximum height using the formula:T = (2h/v)T = (2 × 4.8)/3 = 3.2 sUsing this time, we can find the velocity with which the combined mass of both the balls strikes the ground using the formula:v = gtwhere g = 9.8 m/s²v = 9.8 × 3.2 = 31.36 m/s
Therefore, the speed of the balls when they strike the ground together is 31.36 m/s or approximately 31 m/s (rounded to two decimal places).Hence, the correct answer is 31 m/s.
Learn more on momentum here:
brainly.in/question/54091389
#SPJ11
A 17-cm-diameter circular loop of wire is placed in a 0.86-T magnetic field When the plane of the loop is perpendicular to the field ines, what is the magnetic flux through the loop? Express your answer to two significant figures and include the appropriate units. H Фа Value Units Submit Request Answer Part B The plane of the loop is rotated until it makes a 40 angle with the field lines. What is the angle in the equation 4 - BAcoso for this situation? Express your answer using two significant figures. Request Answer Part B A 17-cm-diameter circular loop of wire is placed in 0.86-T magnetic field The plane of the loop is rotated until it makes a 40"angle with the field lines. What is the angle in the equation = BA cos for this situation? Express your answer using two significant figures.
When plane circular loop wire is perpendicular magnetic field, magnetic flux through loop can be calculated using Φ = B * A. The angle in eq Φ = B * A * cos(θ) represents angle between the magnetic field lines and normal to loop.
In the first scenario where the plane of the loop is perpendicular to the magnetic field lines, we can calculate the magnetic flux through the loop using the formula Φ = B * A. The diameter of the loop is 17 cm, which corresponds to a radius of 8.5 cm or 0.085 m. The area of the loop can be calculated as A = π * r^2, where r is the radius. Substituting the values, we get A = π * (0.085 m)^2. The given magnetic field is 0.86 T. Plugging in the values, the magnetic flux Φ is equal to (0.86 T) multiplied by the area of the loop.
In the second scenario, the plane of the loop is rotated until it makes a 40° angle with the magnetic field lines. In the equation Φ = B * A * cos(θ), θ represents the angle between the magnetic field lines and the normal to the loop. Therefore, the given angle of 40° can be substituted into the equation to determine the contribution of the angle to the magnetic flux.
Learn more about plane here;
https://brainly.com/question/26262923
#SPJ11
What does a triple-beam balance require the user to do?
O add the numbers from the three sliders to determine the mass of an object
O multiply the numbers from the three sliders to determine the mass of an object .
O add the numbers from the three sliders to determine the volume of an object. Omultiply the numbers from the three sliders to determine the volume of an object
Answer:
The correct option is:
O add the numbers from the three sliders to determine the mass of an object
Water flows through a garden hose (radius =1.5 cm ) and fills a tub of volume V=200 Liters in Δt=5.6 minutes. What is the speed of the water in the hose in meters per second? Your Answer: Answer Question 15 (6 points) A beach ball is filled with air and has a radius of r=49 cm. How much mass would be needed to pull the ball underwater in a swimming pool? Answer in kg and assume the volume of the added weight is negligible.
Water flows through a garden hose and fills a tub of 200 Liters in 5.6 minutes. The speed of the water in the hose 0.841 meters per second. A beach ball is filled with air and has a radius of 49 cm and around 513.3 kg of mass is needed to pull the beach ball underwater in a swimming pool.
(a) To calculate the speed of water in the hose, we need to determine the flow rate. First, let's convert the volume of water from liters to cubic meters. Since 1 liter is equal to 0.001 cubic meters, we have:
Volume = 200 liters * 0.001 cubic meters/liter = 0.2 cubic meters
Next, let's convert the time from minutes to seconds:
Time = 5.6 minutes * 60 seconds/minute = 336 seconds
The flow rate (Q) can be calculated by dividing the volume by the time:
Q = [tex]\frac{Volume}{Time} }{}[/tex] = [tex]\frac{ 0.2 }{336}[/tex] = 0.0005952 cubic meters per second
The cross-sectional area of a circular hose can be calculated using the formula: Area =[tex]π * radius^2[/tex]
Given a radius of 1.5 cm, which is 0.015 meters, we have:
Area = [tex]π * (0.015 meters)^2[/tex] ≈ 0.00070686 square meters
Now we can calculate the speed (v) using the formula:
v = Q / Area = [tex]\frac{0.0005952}{0.00070686}[/tex] square meters ≈ 0.841 meters per second
Therefore, the speed of the water in the hose is approximately 0.841 meters per second.
(b) The volume of a sphere can be calculated using the formula:
Volume = [tex](\frac{4}{3} ) * π * radius^3[/tex]
Given a radius of 49 cm, which is 0.49 meters, we have:
Volume = [tex](\frac{4}{3} ) * π * 0.49^3[/tex] ≈ 0.512 cubic meters
The density of water is approximately 1000 kg/m^3. Therefore, the weight of the water displaced by the ball is:
Weight of water displaced = Volume * Density * gravitational acceleration
= 0.512 cubic meters * [tex]1000 kg/m^3 * 9.8 m/s^2[/tex]
≈ 5025.6 Newtons
To balance the buoyant force, an equal and opposite gravitational force is required. The gravitational force is given by:
Gravitational force = Mass * gravitational acceleration
To find the mass needed to balance the buoyant force, we divide the weight of water displaced by the gravitational acceleration:
Mass = Weight of water displaced / gravitational acceleration
=[tex]\frac{5025.6 Newtons}{9.8 m/s^2}[/tex]
≈ 513.3 kg
Therefore, approximately 513.3 kg of mass would be needed to pull the beach ball underwater in a swimming pool.
Learn more about here:
https://brainly.com/question/20165763
#SPJ11
Task 2
Activation Polarization is a mechanism that explains the
corrosion rate. Explain which part of the reaction determines the
total reaction rate.
Activation polarization is a mechanism that influences the corrosion rate, and it is the activation energy of the electrochemical reaction that determines the total reaction rate.
Activation polarization refers to the increase in the electrochemical reaction rate caused by the energy barrier, known as activation energy, that needs to be overcome for the reaction to proceed. The total reaction rate in corrosion is determined by the activation energy, which represents the minimum energy required for the reaction to occur.
In the context of corrosion, activation polarization occurs at the electrode-electrolyte interface. It is caused by various factors such as the nature of the corroding material, composition of the electrolyte, temperature, and presence of inhibitors. Activation polarization affects the rate of electrochemical reactions involved in the corrosion process.
When the activation energy is high, the reaction rate is low, leading to slower corrosion. On the other hand, when the activation energy is low, the reaction rate is high, resulting in faster corrosion. Therefore, the activation energy, which determines the activation polarization, plays a critical role in determining the total reaction rate of corrosion.
To know more about Activation polarization click here:
https://brainly.com/question/28963605
#SPJ11
3. Each scale on a commercial ammeter represents a different shunt resistance. Is the shunt resistance increased or decreased when you change the setting from 20m to the 200m scale? Explain. (5)
When changing the setting from the 20m scale to the 200m scale on a commercial ammeter, the shunt resistance is decreased.
An ammeter is used to measure current, and it is connected in series with the circuit. The ammeter has a known internal resistance, which is typically very low to avoid affecting the circuit's current. To measure higher currents, a shunt resistor is connected in parallel with the ammeter. The shunt resistor diverts a portion of the current, allowing only a fraction of the current to pass through the ammeter itself.
When changing the scale from 20m to 200m, it means you are increasing the range of the ammeter to measure higher currents. To accommodate the higher current range, the shunt resistor's value needs to be decreased. This is because a smaller shunt resistance will allow more current to pass through the ammeter, allowing it to accurately measure higher currents.
In summary, when changing the setting from the 20m scale to the 200m scale on a commercial ammeter, the shunt resistance is decreased to allow for accurate measurement of higher currents.
To know more about the shunt resistance
brainly.com/question/31872307
#SPJ11