The wires would need to be 4 times longer, or 48 meters, for the period to be doubled.
The motion of the trapeze in the Flying Graysons circus act can be approximated as simple harmonic motion, in which the restoring force is proportional to the displacement from the equilibrium position.
The period of a simple harmonic motion for a pendulum or a trapeze swing is given by the equation T = 2π√(L/g), where T is the period, L is the length of the wire, and g is the acceleration due to gravity.
To double the period, we need to solve for the new length of the wire, given that T' = 2T.
2T = 2π√(L'/g)
T = π√(L/g)
2π√(L/g) = π√(L'/g)
Squaring both sides, we get:
4π^2(L/g) = π^2(L'/g)
L' = 4L
L = 12m (Given)
L' = 4*12
L' = 48 m
To know more about the simple harmonic motion, click here;
https://brainly.com/question/30404816
#SPJ11
Using kinematic equations to derive a formular for the horizontal range of the projectile interms of its initial velocity and angle
The formula for the horizontal range is dependent on the initial velocity, angle of projection, and acceleration due to gravity. Therefore, the formula is [tex]range = velocity\;horizontal \times 2V0y / g \times sin\theta[/tex]
The range of a projectile refers to the horizontal distance it covers during its flight. To derive a formula for the horizontal range of a projectile, we can use the kinematic equations.
The horizontal motion of a projectile is constant, and we can use the equation:
distance = velocity × time
In the horizontal direction, the initial velocity of the projectile remains constant throughout its flight. Thus, the horizontal distance traveled can be calculated as:
range = velocity horizontal × time
To determine the time, we can use the vertical motion equation:
[tex]y = V0y \times t + 1/2 gt^2[/tex]
Where y is the vertical displacement, V0y is the initial vertical velocity, g is the acceleration due to gravity, and t is the time.
We know that at the maximum height, the vertical velocity is zero. Thus, the time taken to reach maximum height is:
t = V0y / g
The time taken for the projectile to reach the ground from the maximum height is also equal to t.
Substituting this value of t into the horizontal distance equation gives:
[tex]range = velocity\;horizontal \times 2V0y / g \times sin\theta[/tex]
where θ is the angle of projection.
In summary, the horizontal range of a projectile can be derived using kinematic equations by considering the horizontal motion and vertical motion of the projectile. The formula for the horizontal range is dependent on the initial velocity, angle of projection, and acceleration due to gravity.
To know more about velocity refer here:
https://brainly.com/question/19979064#
#SPJ11
Wave Ceneration
What kind of wave is being generated?
O electromagnetic wave
Olongitudinal
Otransverse
Osurface wave
Without additional context or information, it is impossible to determine the particular wave
What is a wave in physicsIn physics, a wave is a disturbance that travels through space and time, often transferring energy from one place to another. Waves can take many forms, including sound waves, light waves, water waves, and seismic waves. They are characterized by properties such as amplitude, frequency, wavelength, and speed.
Waves are an important concept in many areas of physics, including mechanics, electromagnetism, and quantum mechanics. They can be described mathematically using equations such as the wave equation and are fundamental to our understanding of the behavior of the physical world.
Read more on wave here:https://brainly.com/question/15663649
#SPJ1
How is the ares 4 mav made light enough to get into a high martian orbit?.
The Ares 4 MAV (Mars Ascent Vehicle) has been designed to be as light as possible to make it easier to get into a high Martian orbit.
The main body of the vehicle is constructed out of lightweight materials such as aluminium and titanium. This helps reduce the overall weight of the MAV, making it easier to launch into orbit.
Additionally, the MAV is powered by an advanced propulsion system that is designed to provide maximum efficiency with minimal fuel use. This ensures that the MAV is able to reach its destination with minimal fuel, helping to keep the weight of the craft to a minimum.
Finally, the MAV is equipped with a range of advanced navigation and guidance systems that help to keep the craft on its desired trajectory.
These systems help to ensure the MAV is able to reach its destination with minimal fuel, keeping the craft light and helping it to reach its desired orbit.
Know more about Craft light here
https://brainly.com/question/31200758#
#SPJ11
Someone's idea is for an electric fan that costs nothing to run. the electric motor which turns the fan also turns a generator. this produces electricity for the motor, so no battery or mains supply is needed! explain why this idea will not work.
The idea of an electric fan that costs nothing to run involves an electric motor turning the fan and a generator simultaneously.
This setup is meant to produce electricity for the motor, eliminating the need for a battery or mains supply. However, this idea will not work due to the principles of energy conservation and efficiency.
Firstly, the law of conservation of energy states that energy cannot be created or destroyed, only converted from one form to another.
In this system, the electric motor converts electrical energy into mechanical energy to turn the fan and the generator. The generator then converts the mechanical energy back into electrical energy to power the motor.
This cycle appears to create a perpetual motion machine, which defies the conservation of energy Secondly, no machine can be 100% efficient due to energy losses in the form of heat, sound, and other factors.
Friction between the motor, generator, and fan components would cause energy loss in the form of heat. Similarly, electrical resistance in the wires and other electrical components would also lead to energy loss.
To maintain the system's operation, additional energy would be required to compensate for these losses. This means that a battery or mains supply would still be necessary to keep the fan running.
In conclusion, the idea of an electric fan that costs nothing to run is not feasible due to the conservation of energy and the inefficiencies in real-world systems.
To know more about electric motor refer here
https://brainly.com/question/20263608#
#SPJ11
ACTIVITY 1: AGREE OR DISAGREE
Write AGREE, if you think the statement is correct and DISAGREE if otherwise
1. An RPE of 10 means that the activity is very light
2. Swimming and playing basketball are vigorous activities
3. Street and hip hip dances are active recreational activities
4. Proper execution of dance steps increases the risk of injuries
5. A normal nutritional status means that weight is proportional to the height
6. Physical inactivity and unhealthy diet are risk factors for heart disease.
7. Risk walking and dancing are activities which are moderate intensity
8. One can help the community by sharing his/her knowledge and skills in dancing
9. Surfing on the internet and playing computer games greatly improve one's fitness
10. A physically active person engages in 5-10 minutes of moderately vigorous physical activity three or more
times a week
1. DISAGREE: An RPE of 10 means the activity is extremely hard.
2. AGREE: Swimming and playing basketball are vigorous activities.
3. AGREE: Street and hip-hop dances are active recreational activities.
4. DISAGREE: Proper execution of dance steps reduces the risk of injuries.
5. AGREE: A normal nutritional status means that weight is proportional to the height.
6. AGREE: Physical inactivity and unhealthy diet are risk factors for heart disease.
7. AGREE: Risk walking and dancing are activities which are of moderate intensity.
8. AGREE: One can help the community by sharing his/her knowledge and skills in dancing.
9. DISAGREE: Surfing on the internet and playing computer games do not greatly improve one's fitness.
10. DISAGREE: A physically active person engages in at least 150 minutes of moderately vigorous physical activity per week.
Visit https://brainly.com/question/1133404 to know more about activities
#SPJ11
An electron traveling with speed v around a circle of radius r is equivalent to a current of:
evr/2
ev/r
ev/2πr
2πer/v
2πev/r
The current of an electron traveling with speed v around a circle of radius r is equivalent to ev/(2πr).
An electron traveling with speed v around a circle of radius r is equivalent to a current. To calculate the current, we need to consider the charge of an electron (e) and the time it takes for one complete revolution (T).
First, find the circumference of the circle (C):
C = 2πr
Next, calculate the time for one revolution (T) by dividing the circumference by the speed of the electron:
T = C/v = (2πr)/v
Now, we know that current (I) is defined as the charge (Q) passing through a conductor per unit time (t):
I = Q/t
Since there's only one electron, the charge Q is simply the charge of an electron (e). Substitute the values of Q and T in the formula:
I = e/T = e/[(2πr)/v]
Simplify the expression:
I = ev/(2πr)
For more about electron traveling:
https://brainly.com/question/29480785
#SPJ11
1. During a summer storm, a bolt of lightning is seen. A short time later, thunder is heard. If the lightning struck 3. 50 km away, what was the time period between the lightning and thunder? The speed of sound in air is 331. 0 m/s at 0. 00 °C but the temperature is actually a warm 30. 0 °C. Show your work!
2. The following measurements were made using a Kundt’s tube generator as was done in our virtual lab. Distance from node (crest) to node (trough) = 56. 5 cm at a frequency of 894Hz. What was the velocity of sound in the tube? Knowing that the standard velocity of Helium is 1007 m/s, Air is 340 m/s and Carbon dioxide is 267 m/s, which gas was in the tube? (Assume all were at the same temperature)
The time period between the lightning and thunder is 10.09 seconds.
The velocity of sound in the tube was 1009.2 m/s
The time period between the lightning and thunder can be calculated using the equation: distance = speed × time. Since we know the distance (3.50 km) and the speed of sound at 30.0 °C (347.2 m/s), we can rearrange the equation to solve for time: time = distance / speed. Plugging in the numbers, we get: time = 3.50 km / 347.2 m/s = 10.09 seconds.
The velocity of sound in the tube can be calculated using the formula: velocity = frequency × wavelength. The wavelength can be found by doubling the distance between two consecutive nodes or crests. In this case, the wavelength is 2 × 56.5 cm = 113 cm = 1.13 m. Plugging in the frequency (894 Hz) and the wavelength (1.13 m), we get: velocity = 894 Hz × 1.13 m = 1009.2 m/s. Since the velocity is closest to the standard velocity of Helium (1007 m/s), we can conclude that Helium was in the tube.
To know more about the Lightning, here
https://brainly.com/question/15412090
#SPJ4
After 2 s, Isabela was riding her bicycle at 3 m/s on a straight path. After 5 s, she was moving at 5. 4 m/s. What was her acceleration
Isabela's acceleration was [tex]0.8 m/s^2[/tex]. We can use the following formula to find the acceleration:
a = (vf - vi) / t
where
a is the acceleration,
vf is the final velocity,
vi is the initial velocity, and
t is the time interval.
Using the given values:
vi = 3 m/s
vf = 5.4 m/s
t = 5 s - 2 s
= 3 s
a = (5.4 m/s - 3 m/s) / 3 s
a = 0.8 [tex]m/s^2[/tex]
Therefore, Isabela's acceleration was 0.8 [tex]m/s^2[/tex].
To know more about acceleration refer here
brainly.com/question/12550364#
#SPJ11
A pendulum is observed to complete 23 full cycles in 58 seconds. use the definition of frequency to find the frequency.
The frequency of the pendulum is 0.397 Hz, which means that the pendulum completes 0.397 cycles per second. This value can also be expressed as 23 cycles per 58 seconds or 46 cycles per 116 seconds, etc.
The frequency of a wave or oscillation is defined as the number of cycles completed per unit time. In this case, we are given that a pendulum completes 23 full cycles in 58 seconds. Therefore, the frequency of the pendulum can be calculated by dividing the number of cycles by the time taken.
Frequency = Number of cycles / Time
Substituting the given values, we get:
Frequency = 23 / 58
Frequency = 0.397 Hz
Therefore, the frequency of the pendulum is 0.397 Hz, which means that the pendulum completes 0.397 cycles per second. This value can also be expressed as 23 cycles per 58 seconds or 46 cycles per 116 seconds, etc.
The period of the pendulum can be calculated by taking the reciprocal of the frequency, i.e., the time taken for one complete cycle. In this case, the period is 2.52 seconds (1 / 0.397), which means that it takes the pendulum 2.52 seconds to complete one full swing.
To know more about frequency refer here:
https://brainly.com/question/30751571#
#SPJ11
Hubble investigates the relationship between the red-shift of light and distant galaxies.
give the link that Hubble found between observing red-shift and how far away they are from Earth .
Hubble concluded that there is a linear redshift-distance relationship; that is, if one galaxy is twice as far away as another, its redshift is twice as large.
HUbble's lawIn 1929, Edwin Hubble published his first paper on the relationship between redshift and distance. He tentatively concluded that there is a linear redshift-distance relationship; that is, if one galaxy is twice as far away as another, its redshift is twice as large.
This relationship is known as the Hubble relation. If you graph this relation, the slope of the line is the Hubble constant or a measure of the expansion rate of the universe.
More on Hubble's relation can be found here: https://brainly.com/question/29752713
#SPJ1
Imagine conventional current running up the right, around and back down left side of a loop of wire. The magnetic field inside the loop of wire will be directed ______.
a) out of the page.
b) into the page.
c) the fields will cancel each other out
The magnetic field inside the loop of wire will be directed into the page. Option b is correct.
When a current flows through a loop of wire, it generates a magnetic field around it. The direction of the magnetic field can be determined using the right-hand rule. If you curl the fingers of your right hand in the direction of the conventional current (from right to left in this case), your thumb will point in the direction of the magnetic field inside the loop. In this scenario, the current flows up the right side of the loop, then around the top and back down the left side.
Using the right-hand rule, the magnetic field inside the loop is directed into the page. This is because the magnetic field lines form a loop inside the wire, and the direction of the field is perpendicular to the plane of the loop, pointing into the center of the loop. Option b is correct.
To know more about magnetic field, here
brainly.com/question/14848188
#SPJ4
the approach to motivation emphasizes the role of species-specific instincts in directing behavior.
The approach to motivation that emphasizes the role of species-specific instincts in directing behavior is called the Instinct Theory of Motivation.
This theory suggests that certain innate, fixed patterns of behavior, known as instincts, are responsible for motivating actions and reactions within specific species. These instincts have evolved over time due to their contribution to the survival and reproductive success of the species.
For example, the fight or flight response, which is a common instinct among many animals, helps protect them from predators and ensures their survival. Another example is the maternal instinct observed in many mammal species, which promotes nurturing and protective behaviors towards their offspring, ultimately benefiting their survival and reproduction.
Instinct Theory of Motivation has its roots in the work of early psychologists like William James and Sigmund Freud, who believed that instincts played a significant role in shaping human behavior. However, it is important to note that while instincts do influence motivation, they are not the only factors at play. Other approaches, such as the drive-reduction theory and cognitive theories, also contribute to our understanding of motivation and behavior.
To know more about Instinct Theory of Motivation, refer here:
https://brainly.com/question/31586201#
#SPJ11
A flywheel of mass 3. 0g consist of a flat uniform disc of radius 0. 40m. It pivots about central axis perpendicular to its plane. A)calculete its moment of inertia,using information from this unit. B)a torque of 6. 8 n m act on it. How will it respond?
A flywheel of mass 3. 0g consist of a flat uniform disc of radius 0. 40m. It pivots about central axis perpendicular to its plane, moment of inertia: 2.4 x 10⁻⁴ kg m².
A) To calculate the moment of inertia of a flat uniform disc, we use the formula: I = (1/2) * M * R², where I is the moment of inertia, M is the mass, and R is the radius.
Given the flywheel's mass (3.0g) and radius (0.40m), first convert the mass to kilograms: 3.0g = 0.003 kg. Then, plug the values into the formula: I = (1/2) * 0.003 kg * (0.40m)².
The moment of inertia of the flywheel is approximately 2.4 x 10⁻⁴ kg m².
B) When a torque of 6.8 Nm acts on the flywheel, it causes angular acceleration, which can be calculated using the formula: τ = I * α, where τ is the torque, I is the moment of inertia, and α is the angular acceleration.
Rearrange the formula to find α: α = τ / I. Plugging in the values, we get: α = 6.8 Nm / (2.4 x 10⁻⁴ kg m²). The angular acceleration of the flywheel is approximately 2.83 x 10⁻⁴ rad/s². This means the flywheel will experience a significant increase in angular velocity due to the applied torque.
To know more about moment of inertia, refer here:
https://brainly.com/question/15246709#
#SPJ11
5. A certain dog whistle has a frequency of 35. 1 kHz. A person blows the whistle while riding in the back of a "convertible" airplane with a velocity of 126 m/s, north. With what minimum velocity must a person in a second airplane fly in order for the sound to be shifted into the audible frequency range? (speed of sound in air is 343 m/s)
In this scenario, we need to use the Doppler effect equation to calculate the minimum velocity required for the sound to be heard. The Doppler effect is the change in frequency or wavelength of a wave in relation to an observer who is moving relative to the wave source.
The equation we will use is:
f' = f (v + vobs) / (v - vs)
Where f is the original frequency (35.1 kHz), v is the velocity of sound (343 m/s), vobs is the velocity of the observer (126 m/s), and vs is the velocity of the source (which is assumed to be zero in this case).
To find the new frequency, f', that would be heard by the second airplane, we need to solve for v2, the velocity of the second airplane. We also need to know the range of audible frequencies, which is typically between 20 Hz and 20 kHz.
If we plug in the given values, we get:
f' = 35.1 kHz (343 m/s + 126 m/s) / (343 m/s - v2)
Simplifying this equation gives:
f' = 1.304 + 0.00367v2
To find the minimum velocity that would put the frequency in the audible range, we can set f' equal to 20 kHz:
20 kHz = 1.304 + 0.00367v2
Solving for v2 gives:
v2 = 5,355 m/s
This means that the second airplane must fly at a minimum velocity of 5,355 m/s in order for the sound to be shifted into the audible frequency range. This is obviously impossible, so the whistle would not be heard by the second airplane.
In conclusion, the Doppler effect is a fascinating phenomenon that can help us understand how waves behave when the observer or source is in motion. By using the Doppler equation, we can calculate the shift in frequency and determine whether a sound will be audible or not. In this particular scenario, we see that the minimum velocity required for the sound to be heard is far beyond what is physically possible.
To know more about Doppler effect refer here
https://brainly.com/question/15318474#
#SPJ11
Can someone please help me with this lesson outline?
Answer:
The amount of gravitational force INCREASES as the distance between two objects increases; thus, an astronauts weight DECREASES as she or he moves away from earth into space.
hope this helped.
When fertilizers enter surface water, they cause problems in the watershed by
When fertilizers enter surface water, they can cause several problems in the watershed:
1. Eutrophication: Fertilizers contain nutrients such as nitrogen and phosphorus, which are essential for plant growth. However, when these nutrients enter surface water bodies through runoff or leaching, they can lead to excessive nutrient enrichment, a process called eutrophication. This excessive nutrient load stimulates the growth of algae and aquatic plants, resulting in algal blooms and dense vegetation. These blooms can deplete oxygen levels in the water, leading to hypoxia or even anoxia, which can harm or kill fish and other aquatic organisms.
2. Harmful Algal Blooms (HABs): Excessive nutrients from fertilizers can promote the growth of harmful algal species, known as harmful algal blooms (HABs). These algae produce toxins that can be detrimental to the health of aquatic organisms, including fish, shellfish, and other wildlife. In addition, some of these toxins can contaminate the water, making it unsafe for human use and posing risks to public health.
3. Disruption of Aquatic Ecosystems: Fertilizer runoff can alter the natural balance and composition of aquatic ecosystems. Excessive plant growth due to nutrient enrichment can outcompete native species, leading to a decline in biodiversity. Changes in species composition can disrupt ecological interactions, such as predator-prey relationships and competition, which can have cascading effects on the entire ecosystem.
4. Degraded Water Quality: Fertilizers can contribute to water pollution by introducing excess nutrients into surface water. Besides promoting algal growth, these nutrients can also affect water quality by causing increased turbidity, reduced clarity, and altered pH levels. Such changes can negatively impact aquatic organisms and their habitats, as well as limit recreational activities and drinking water resources.
5. Nutrient Transport to Coastal Areas: Fertilizer runoff from watersheds can be transported to coastal areas through rivers and streams. The excess nutrients can contribute to the development of coastal dead zones, where oxygen levels are severely depleted, resulting in the loss of marine life and disrupting fisheries and recreational activities.
To mitigate these problems, it is crucial to adopt sustainable farming practices, such as precision agriculture, where fertilizers are applied in a targeted and controlled manner. Implementing buffer zones, constructed wetlands, and other best management practices can help filter and reduce nutrient runoff into surface water.
Additionally, public awareness and education about proper fertilizer use and the importance of protecting water resources are essential for minimizing the impacts of fertilizer runoff on watersheds.
To know more about fertilizers refer here
https://brainly.com/question/3204813#
#SPJ11
If the electric potential at point A in the electric field created by
a point charge of 3. 3 * 10-11 C is 0. 6 V, what's the distance
between point A and the point charge? Estimate kas 9. 00 x
109Nm2/C2
The distance between point A and the point charge is approximately 1.815 micrometers.
The electric potential at a point in the electric field created by a point charge is given by the formula V = kq/r, where V is the electric potential, k is the Coulomb constant (9.00 x [tex]10^{9}[/tex] [tex]Nm^{2}/C^{2}[/tex]), q is the point charge, and r is the distance from the point charge.
Rearranging this equation, we get r = kq/V. Plugging in the given values, we get: r = (9.00 x [tex]10^{9}[/tex] [tex]Nm^{2}/C^{2}[/tex])(3.3 x [tex]10^{-11}[/tex] C)/(0.6 V)
Simplifying this expression, we get: r = 1.815 x [tex]10^{-6}[/tex] m
Therefore, the distance between point A and the point charge is approximately 1.815 micrometers.
To know more about electric potential , refer here:
https://brainly.com/question/12645463#
#SPJ11
An archer shot a 0. 04 kg arrow at a target. The arrow accelerated at 7,000 m/s2 to reach a speed of 60. 0 m/s as it left the bow. How much force did the arrow have? ___N
The force exerted on the 0.04 kg arrow, which accelerated at 7,000 m/s² to reach a speed of 60.0 m/s, is 280 N.
To calculate the force exerted on the arrow, we can use Newton's second law of motion, which states that the force acting on an object is equal to its mass multiplied by its acceleration (F = m*a). In this case, the mass of the arrow (m) is 0.04 kg, and its acceleration (a) is 7,000 m/s².
Step 1: Identify the mass (m) and acceleration (a) of the arrow.
m = 0.04 kg
a = 7,000 m/s²
Step 2: Apply Newton's second law of motion (F = m*a) to calculate the force (F).
F = 0.04 kg * 7,000 m/s²
Step 3: Multiply the mass and acceleration values to obtain the force.
F = 280 N
Therefore, the force exerted on the arrow is 280 Newtons.
Know more about Newton's second law of motion click here:
https://brainly.com/question/27712854
#SPJ11
Como puedo saber la carga de una partícula en un campo magnético
The charge of a particle in a magnetic field can be determined by measuring the force, velocity, and strength of the magnetic field using the Lorentz force equation. There are various methods to measure the charge, such as using a particle accelerator or mass spectrometer.
In a magnetic field, charged particles experience a force that can be used to determine their charge. This force, known as the Lorentz force, is given by the equation F = q(v x B), where F is the force, q is the charge of the particle, v is the velocity of the particle, and B is the strength of the magnetic field.
To determine the charge of a particle in a magnetic field, you can measure the velocity of the particle and the strength of the magnetic field, and then measure the force experienced by the particle. By rearranging the equation F = q(v x B), you can solve for the charge q.
It is important to note that the Lorentz force only applies to charged particles that are in motion. If the particle is stationary, it will not experience any force in a magnetic field.
In practice, there are many ways to measure the charge of a particle in a magnetic field, such as using a particle accelerator or a mass spectrometer. These techniques involve manipulating the motion of the particle in a controlled way and measuring the resulting forces and velocities to determine its charge.
To learn more about magnetic fields
https://brainly.com/question/3160109
#SPJ4
Complete question:
How can I know the charge of a particle in a magnetic field?
Which list shows the correct order of processes that occur before and during ovulation?
egg released from ovary Right arrow. Hormones send signal Right arrow. Egg travels to fallopian tube
egg travels to fallopian tube Right arrow. Egg is released from ovary Right arrow. Hormones send signal
hormones send signal Right arrow. Egg travels to fallopian tube Right arrow. Egg released from ovary
hormones send signal Right arrow. Egg released from ovary Right arrow. Egg travels to fallopian tube
Hormones send signal → Egg released from ovary → Egg travels to fallopian tube.
Hormones send signal: The process of ovulation is triggered by hormonal signals. In the female reproductive system, the pituitary gland releases follicle-stimulating hormone (FSH) and luteinizing hormone (LH) in response to the signals from the hypothalamus. These hormones play a crucial role in the maturation of ovarian follicles and the release of an egg from the ovary.
Egg is released from the ovary: Once the hormonal signals are received, the dominant ovarian follicle (containing a developing egg) reaches maturity.
The surge in luteinizing hormone (LH) triggers the release of the egg from the ovary. This is known as ovulation. The released egg is then available for potential fertilization.
Egg travels to the fallopian tube: After ovulation, the released egg, also known as the ovum or oocyte, travels through the fallopian tube. The fallopian tubes, also called uterine tubes, are structures that connect the ovaries to the uterus.
The fallopian tubes have finger-like projections called fimbriae that help capture the released egg and guide it into the tube.
In summary, the correct order of processes before and during ovulation is as follows:
Hormones send signal
Egg is released from the ovary
Egg travels to the fallopian tube
These processes are essential for successful reproduction in females and are part of the menstrual cycle.
To learn more about fallopian, refer below:
https://brainly.com/question/3477462
#SPJ11
Answer:
d
Explanation:
edge
A 250g ball falls vertically downward, hitting the floor with a speed of 3.5m/s and rebounding upward with a speed of 2.5m/s (a) find the change in the balls velocity. (b) find the change in the balls momentum.
The change in velocity of the ball is 6 m/s, and the change in momentum is -0.35 kg·m/s.
(a) The change in the ball's velocity is the difference between its final velocity (2.5 m/s) and its initial velocity (-3.5 m/s):
Change in velocity = final velocity - initial velocity
Change in velocity = 2.5 m/s - (-3.5 m/s)
Change in velocity = 6 m/s
(b) The change in the ball's momentum is given by the impulse it experiences during the collision with the floor.
The impulse is equal to the change in momentum, which is equal to the product of the force exerted on the ball and the time the force is applied.
Assuming the collision is perfectly elastic, the magnitude of the impulse is twice the ball's initial momentum:
Change in momentum = 2 x (mass x initial velocity)
Change in momentum = 2 x (0.25 kg x (-3.5 m/s))
Change in momentum = -0.35 kg·m/s
Thus, the change in velocity of the ball is 6 m/s, and the change in momentum is -0.35 kg·m/s.
To know more about velocity, refer here:
https://brainly.com/question/30559316#
#SPJ11
Two cars X and Y start from two points separated by 75 m. Y which is ahead of X. starts from rest with acceleration of 10 m/s2 and X starts with uniform velocity of 40 m/s . They meet each other twice in their journey. Find the time gap between their meetings.
Two cars X and Y start from two points separated by 75 m. Y which is ahead of X. starts from rest with acceleration of 10 m/s2 and X starts with uniform velocity of 40 m/s . The time gap between the two meetings would be approximately 1.44 seconds.
Let's assume that the two cars meet for the first time after time t₁, and then they meet for the second time after time t₂.
We can start by finding the time it takes for car Y to catch up to car X for the first time. We can use the following kinematic equation:
d = ut + (1/2)at²
where d is the distance between the two cars, u is the initial velocity of car X, a is the acceleration of car Y, and t is the time it takes for car Y to catch up to car X.
Plugging in the values, we get:
75 = 40t₁ + (1/2)(10)t₁²
Simplifying the equation, we get:
5t₁² + 8t₁ - 15 = 0
Solving for t1 using the quadratic formula, we get:
-t₁ = 1.5 seconds or -1 seconds
Since time cannot be negative, we discard the negative solution and conclude that the two cars meet for the first time after 1.5 seconds.
Now, let's find the time it takes for the two cars to meet for the second time. We can use the fact that the two cars have covered the same distance between their first and second meetings.
The distance covered by car Y during the time t₁ is:
d₁ = (1/2)(10)(1.5)² = 11.25 m
The distance remaining between the two cars is:
75 - 2d₂ = 52.5 m
To find the time it takes for car Y to cover this distance, we can use the same kinematic equation as before:
52.5 = 0t₂ + (1/2)(10)t₂²
Simplifying the equation, we get:
t₂ = (21)
Therefore, the time gap between the two meetings is:
t₂ - t₁ = √(21) - 1.5 seconds
So, the time gap between the two meetings is approximately 1.44 seconds.
To know more about acceleration
https://brainly.com/question/13397622
#SPJ1
2. 2 "However, we need to examine our environment, and ask problematic questions such as,
"whose law?" Obviously, it's the law of the dominant class in that society (Study Guide,
p. 7)
Which class does the South African law, including the constitution, serve? Explain fully. (3)
The law in South Africa, including the constitution, serves the interests of the dominant class, which historically has been the white minority. During apartheid, the law was used to enforce segregation and discrimination against the majority black population.
While the constitution and laws have since been revised to promote equality and protect human rights, there are still systemic issues that continue to serve the interests of the wealthy and powerful.
For example, land ownership remains highly concentrated in the hands of a few, and the legal system can be slow and expensive, making it difficult for marginalized communities to access justice. Additionally, the legacy of apartheid-era policies and practices continues to impact access to education, healthcare, and economic opportunities for many black South Africans.
Overall, while progress has been made in addressing inequality and promoting social justice, the law in South Africa still reflects the interests of the dominant class and requires continued efforts to ensure that it serves the needs of all citizens.
Know more about human rights here:
https://brainly.com/question/3444313
#SPJ11
A calorimeter of mass 60 g contains 180 g of water at 29°C. Calculate the common final
equilibrium temperature of the mixture if 37. 2 g of ice at - 10°C is added to it. Specific
heats are given as follows: ice = 2108 J/kg. K, calorimeter = 0. 42 J/g. °C, water =
4186J/kg. °C and latent heat of fusion for ice is 333 kJ/kg
The common final equilibrium temperature of the mixture is 61.47°C
To solve this problem, we need to use the principle of conservation of energy, which states that the total amount of energy in a system is constant. We can start by calculating the amount of energy required to melt the ice and raise the temperature of the resulting water to the final equilibrium temperature. This energy will be equal to the amount of energy lost by the calorimeter and the water.
First, we need to calculate the amount of heat absorbed by the ice to melt it. This can be done using the formula:
Q = m × Lf
where Q is the amount of heat absorbed, m is the mass of the ice, and Lf is the latent heat of fusion for ice. Plugging in the values given, we get:
Q = 37.2 g × 333 kJ/kg = 12,395.6 J
Next, we need to calculate the amount of heat required to raise the temperature of the resulting water to the final equilibrium temperature. This can be done using the formula:
Q = m × c × ΔT
where Q is the amount of heat required, m is the mass of the water, c is the specific heat of water, and ΔT is the change in temperature. Since the final equilibrium temperature is not known, we will use T as a variable.
The mass of the water in the calorimeter is:
180 g = 0.18 kg
The mass of the calorimeter itself is:
60 g = 0.06 kg
So the total mass of the system is:
0.18 kg + 0.06 kg + 0.0372 kg = 0.2772 kg
Now we can set up an equation to solve for the final equilibrium temperature:
12,395.6 J + (0.06 kg × 0.42 J/g. °C × ΔT) + (0.18 kg × 4186 J/kg. °C × ΔT) = (0.2772 kg × c × ΔT)
Simplifying and solving for ΔT, we get:
ΔT = 32.47°C
So the final equilibrium temperature of the mixture is:
29°C + 32.47°C = 61.47°C
To know more about the conservation of energy, click here;
https://brainly.com/question/13949051
#SPJ11
When one skater pushes another skater, how do they move? how can you predict the specific motion that will occur?
Answer:
M1 V1 + M2 V2 = 0 the center of mass remains at zero since no external forces are present
Ex: V1 = - M2 / M1 * V2
When investigating a crime scene, an investigator finds bullet holes in the wall out the window,
across the street (about 100m away). These bullet holes are approximately 1. 1m off the
ground. The bullets from this particular weapon travel at a rate of 350m/s. Assuming the
weapon was fired horizontally, at what height was the weapon fired? This insight will be used to
narrow the search for a suspect.
When investigating a crime scene, it is crucial to gather as much evidence as possible to understand what happened. In this case, the investigator found bullet holes in the wall out the window, indicating that a weapon was fired horizontally. By analyzing the trajectory of the bullet, the investigator can determine at what height the weapon was fired.
One way to do this is by measuring the angle of the bullet holes in relation to the ground. If the bullet holes are at a lower angle, it suggests that the weapon was fired from a lower height. Conversely, if the bullet holes are at a higher angle, it indicates that the weapon was fired from a higher height.
Another way to determine the height of the weapon is by examining the location of the bullet holes on the wall. If the bullet holes are located closer to the ground, it suggests that the weapon was fired from a lower height. On the other hand, if the bullet holes are located higher up on the wall, it indicates that the weapon was fired from a higher height.
Knowing the height of the weapon can provide important insights into the crime. For example, if the weapon was fired from a low height, it suggests that the perpetrator was in close proximity to the victim. Conversely, if the weapon was fired from a high height, it could indicate that the perpetrator was located at a distance from the victim.
Overall, determining the height at which the weapon was fired is an important piece of evidence that can help investigators piece together what happened at the crime scene. By analyzing the trajectory of the bullet and the location of the bullet holes, investigators can gain valuable insights that can help them solve the crime.
To know more about investigating refer here
https://brainly.com/question/29365121#
#SPJ11
Vibration of an object about an equilibrium point is called simple harmonic motion when the restoring force is proportional to:.
Vibration of an object about an equilibrium point is called simple harmonic motion when the restoring force is proportional to the displacement from the equilibrium point and is directed towards the equilibrium point.
This is known as Hooke's Law, which states that the force exerted by a spring is directly proportional to the displacement of the spring from its equilibrium position.
Mathematically, this can be expressed as F = -kx, where F is the restoring force, x is the displacement from the equilibrium point, and k is the spring constant, a measure of the stiffness of the spring.
To know more about Hooke's Law refer here
https://brainly.com/question/29126957#
#SPJ11
The 75. 0 kg hero of a movie is pulled upward with a constant acceleration of 2. 00 m/s2 by a rope. What is the tension on the rope?
585N
75. 0N
885N
11. 8N
The tension on the rope is 885 N.
To find the tension on the rope, we need to consider both the gravitational force acting on the hero and the additional force required to provide the constant acceleration. Here's a step-by-step explanation:
1. Calculate the gravitational force acting on the hero using the formula, Force due to gravity = m * g, where m is the mass (75.0 kg) and g is the acceleration due to gravity (9.81 m/s²).
Force due to gravity = 75.0 kg * 9.81 m/s² ≈ 735.75 N
2. Calculate the additional force required to provide the constant acceleration of 2.00 m/s² using the formula Force due to acceleration = m * a, where m is the mass (75.0 kg) and a is the acceleration (2.00 m/s²).
Force due to acceleration= 75.0 kg * 2.00 m/s² = 150 N
3. Add both forces to find the tension on the rope, which is the sum of the gravitational force and the additional force needed for acceleration.
Tension = Force due to gravity+ Force due to acceleration
Tension = 735.75 N + 150 N
Tension = 885.75 N
Therefore, the tension on the rope is approximately 885 N (rounded to the nearest whole number).
Know more about tension in string click here;
https://brainly.com/question/14177858
#SPJ11
Boyle’s law describes the relationship between pressure and
volume
. more specifically, it states that the relationship between these two quantities is
[ select ]
proportional. it is important to remember that boyle’s law only applies to
[ select ]
and situations when the
[ select ]
is constant.
Boyle's law describes the relationship between pressure and volume.
More specifically, it states that the relationship between these two quantities is inversely proportional. It is important to remember that Boyle's law only applies to ideal gases and situations when the temperature is constant.
Boyle's law, named after the physicist Robert Boyle, states that for a given amount of gas at a constant temperature, the pressure and volume of the gas are inversely proportional to each other.
This means that as the pressure on a gas increases, its volume decreases, and vice versa, as long as the temperature remains constant.
Mathematically, Boyle's law can be expressed as:
P₁V₁ = P₂V₂
where P₁ and V₁ represent the initial pressure and volume, respectively, and P₂ and V₂ represent the final pressure and volume, respectively.
Boyle's law is derived from the kinetic theory of gases and is applicable to ideal gases under specific conditions. It assumes that the gas particles are point masses with negligible volume and that there are no intermolecular forces between them.
Additionally, Boyle's law assumes that the temperature remains constant during the process.
It's important to note that Boyle's law is not applicable to all gases in all situations. Real gases may deviate from ideal behavior, especially at high pressures or low temperatures, where intermolecular forces become more significant.
In such cases, additional corrections or other equations of state may be needed to describe the behavior of the gas accurately.
To learn more about volume, refer below:
https://brainly.com/question/1578538
#SPJ11
A tube driven by a speaker displays resonances at 450 hz and 600 hz with no resonances in between. The fundamental frequency was found to be 150 hz. What are the boundary conditions on the tube?.
The resonances in a tube driven by a speaker are determined by the length and properties of the tube. The presence of resonances at specific frequencies indicates that the tube is supporting standing waves at those frequencies.
In this case, the tube displays resonances at 450 Hz and 600 Hz, with no resonances in between. The fundamental frequency, which is the lowest resonant frequency, is found to be 150 Hz.
To understand the boundary conditions on the tube, we can use the concept of open and closed ends of a tube.
1. Open End: An open end of a tube corresponds to a displacement antinode (maximum amplitude) for a standing wave. At an open end, the air particles in the tube are free to move, resulting in zero pressure points and maximum amplitude of motion.
2. Closed End: A closed end of a tube corresponds to a displacement node (minimum amplitude) for a standing wave. At a closed end, the air particles in the tube cannot move, resulting in maximum pressure points and minimum amplitude of motion.
Given that the tube displays resonances at 450 Hz and 600 Hz with no resonances in between, we can infer the following boundary conditions on the tube:
1. The tube has an open end at one side and a closed end at the other side. This configuration allows for the fundamental frequency (150 Hz) to be supported since it requires a displacement node at the closed end and a displacement antinode at the open end.
2. The first harmonic (450 Hz) corresponds to a displacement node at the closed end and a displacement antinode at the open end.
3. The second harmonic (600 Hz) corresponds to a displacement node at the closed end and a displacement antinode at the open end.
In summary, the boundary conditions on the tube can be described as an open-closed tube configuration, where one end is open and the other end is closed. This configuration allows for the fundamental frequency and harmonics at 450 Hz and 600 Hz to be supported.
To know more about resonances refer here
https://brainly.com/question/31781948#
#SPJ11