he JM will heighten (exaggerate) lower limb tendon reflexes by countering some of the normal descending inhibition the brain sends to the reflex arc.
What happens during the Jendrassik maneuver?A medical technique called the Jendrassik manoeuvre involves the patient clenching their teeth, flexing both sets of fingers into a hook-like shape, and interlocking those sets of fingers. The patellar reflex is then induced by striking the tendon below the patient's knee with a reflex hammer.
When the technique is not being used, the reflex outcome of the same movement is compared to the induced reaction. When a patient is focused on the technique, a bigger reflex reaction is frequently seen: "Afferent activity brought on by such muscle tension may activate a weak or seemingly absent reflex.
This is the actual justification for the procedure, not that it is intended to divert the patient's attention, a common misperception that persists to this day." This result
To be learn more about procedure refer to:
https://brainly.com/question/27176982?referrer=searchResults
#SPJ1
What is Accenture doing for sustainability?
By calculating carbon emissions reduction and sustainability index improvement, the Accenture MyNav Green Cloud Advisor incorporates sustainability when moving client data centers to the cloud.
The availability of computer system resources without the user having to manage them directly is referred to as cloud computing. The network of remote servers located on the internet in this instance aids in the management and storage of the data.
Mynav Green Cloud Advisor is essential since it aids businesses in creating cloud solutions that may be utilized to lower carbon emissions.
As cloud solutions are essential to businesses, Accenture MyNav Green Cloud Advisor integrates sustainability.
reduces the expense of transportationcreates a design that is appropriate and aids the customer in becoming more sustainable.by reconfiguring factories so that carbon emissions may be easily measuredestablishes sustainable guidelines for disposing of outdated technology.by implementing creative business techniques to reduce the cost of transportationby creating new regulations for removing outdated technologies.To learn more about Accenture and sustainability from given link
https://brainly.com/question/24918185
#SPJ4
distinguish between Mass and weight
Answer:
One is heavier and one is lighter.
A tornado lifts a truck 252 m above the ground. As the storm continues, the tornado throws the truck horizontally. It lands 560 m away from where it was picked up. How fast was the truck traveling horizontally through its flight
A tornado lifts a truck 252 m above the ground. As the storm continues, the tornado throws the truck horizontally. It lands 560 m away from where it was picked up. The truck will travel at -78.1 m/s and its time of flight is 17.44 seconds.
Distance of any body or an object is the total path covered by it in a particular time. We can calculate the distance of any object covered by it using the equations of motion in our question. we can also convert equation of motion in our favor to find our answer in a proper format to find our answer by the proper use of equation of motion. By this information we can formerly consider that a tornado lifts a truck 252 m above the ground. As the storm continues, the tornado throws the truck horizontally. It lands 560 m away from where it was picked up. The truck will travel at -78.1 m/s and its time of flight is 17.44 seconds.
Initial velocity = 0 , initial height = 252
[tex]dy = u\times t + \frac{1}{2} at^{2}[/tex]
[tex]dy = u\times t +0.5 gt^{2}[/tex]
[tex]252 =0+ 4.9t^{2}[/tex]
t = 7.17 seconds
horizontal:
v = [tex]\frac{dx}{t} =560\times7.17=[/tex]=78.103 m/s
To the nearest tenth; 78.1 M/s
Learn more about distance:
brainly.com/question/15172156
#SPJ4
Finish A 16 N force is applied to an object and 96 J of work is done. How far was the object moved?
Answer:
[tex]\boxed {\boxed {\sf 6 \ meters}}[/tex]
Explanation:
Work is the product of force and distance.
[tex]W=F*d[/tex]
We know that 96 Joules of work were done and a 16 Newton force was applied to the object.
W= 96 J F= 16 NSubstitute the values into the formula.
[tex]96 \ J= 16 \ N * d[/tex]
First, let's convert the units. This will make cancelling units easier later in the problem. 1 Joule (J) is equal to 1 Newton meter (N*m), so the work of 96 Joules equals 96 Newton meters.
[tex]96 \ N*m= 16 \ N * d[/tex]
Now, solve for distance by isolating the variable, d. It is being multiplied by 16 Newtons and the inverse of multiplication is division. Divide both sides of the equation by 16 N.
[tex]\frac {96 \ N*m}{16 \ N}= \frac{16 \ N *d}{16 \ N}[/tex]
[tex]\frac {96 \ N*m}{16 \ N}=d[/tex]
The units of Newtons cancel.
[tex]\frac {96}{16} \ m = d[/tex]
[tex]6 \ m = d[/tex]
The object moved a distance of 6 meters.
how much time would it take for an object to fall 4.7 meters
Answer:
t = 0.97 s
Explanation:
Given that,
height, h = 4.7 m
We need to find the time taken by the object to fall 4.7 m.
Let it is t. Using second equation of kinematics to solve it such that,
[tex]h=ut+\dfrac{1}{2}gt^2[/tex]
u is initial velocity, u = 0
So,
[tex]h=\dfrac{1}{2}gt^2\\\\t=\sqrt{\dfrac{2h}{g}}\\\\t=\sqrt{\dfrac{2\times 4.7}{9.8}}\\\\t=0.97\ s[/tex]
So, the required time is equal to 0.97 seconds.
The time it would take the object is 0.98 secs
From the question,
We are to determine how much time it would take for an object to fall 4.7 meters. That is, the time it would take the object to fall from a height 4.7 meters.
From one of the equations of motions for free falling object.
[tex]h = ut + \frac{1}{2} gt^{2}[/tex]
Where h is the height
u is the initial velocity
t is the time
and g is the acceleration due to gravity (Take g = 9.8 m/s²)
Since, the object is dropped from rest, the initial velocity, u, is 0 m/s
From the given information,
h = 4.7 m
Putting the parameters into the equation, we get
[tex]4.7 = 0(t) +\frac{1}{2} (9.8)t^{2}[/tex]
[tex]4.7 = 0 + 4.9t^{2}[/tex]
[tex]4.7 = 4.9t^{2}[/tex]
∴ [tex]t^{2} = \frac{4.7}{4.9}[/tex]
[tex]t^{2}= 0.9592[/tex]
[tex]t = \sqrt{0.9592}[/tex]
t = 0.98 secs
Hence, the time it would take the object is 0.98 secs
Learn more here: https://brainly.com/question/18915944
1. When the current I is positive, the capacitor charge Q isdecreasing.
2. When the current I is positive, the measured VOLTAGE IN 2 willbe negative.
3. When the capacitor charge Q is positive, the measured VOLTAGE IN1 is positive.
4. The capacitor charge Q exponentially decays to zero when the RELAY is thrown to position N.O.
5. The transient currents that flow in this experiment decay exponentially to zero
1. The capacitor charge Q is decreasing while the current I is positive is false
2. If the measured voltage in 2 is negative when the current I is positive, it is false.
3. When the measured VOLTAGE IN1 is positive, the capacitor charge Q is positive, which is True.
4. When the RELAY is thrown to the position N.O is False, the capacitor charge Q rapidly decays to zero.
5. This experiment's transient currents flow exponentially decrease to zero, which is false
A capacitor is a type of electric device that can charge and store electrical energy when a voltage is applied to its terminals.
Formulas link the applied voltage to the capacitor's charge Q and currents I.
The final formula shows that while the current is positive, the capacitor's voltage is positive (increasing) and the
Q=CV
I=dQ/dt=C(dQ/dt)
The charge is rising.
As a result, the question's assertion is false.
As the currect is flowing from VOLTAGE IN 2 to VOLTAGE IN 1 it will be positive.
As a result, the question's assertion is false.
The measured VOLTAGE IN1 is positive when the capacitor charge Q is positive.
As a result, the question's assertion is True.
The position of the relay is the N.O. position which stands for "normally opened", i.e. no current can flow through it.
As a result, the question's assertion is false.
The following formula provides the transient current flow in this experiment:
[tex]i=i_0e^{\frac{-t}{RC}}[/tex]
As a result, the question's assertion is false.
For such more question on capacitor charge.
https://brainly.com/question/27393410
#SPJ4
Note: The diagram of the question is added bellow,
Equal and Opposite but Not Balanced
Because action and reaction forces are equal and opposite, you might think
they would cancel out, as balanced forces do. But you would be wrong.
Balanced forces are equal and opposite forces that act on the same object.
That's why they cancel out. Action-reaction forces are equal and opposite
forces that act on different objects, so they don't cancel out. In fact, they often
result in motion. Think about Jerod again. He applies force with his foot to the
ground, whereas the ground applies force to Jerod and the skateboard,
causing them to move forward.
If the forces are equal and opposite, why do they not cancel out?
Answer:
Nedecito puntos para mi tares
Which type of wave moves both energy and the particles in the same direction as the medium?
Answer:
Longitudinal waves
Explanation:
With sound waves, the energy travels along in the same direction as the particles vibrate. This type of wave is known as a longitudinal wave , so named because the energy travels along the direction of vibration of the particles.
A 200-kg crate is pushed horizontally with a force of 720 N. If the coefficient of friction is 0.20, calculate the acceleration of the crate.
1.54 is the acceleration of the crate. The Second Newton's law states that an object acquires acceleration when an external unbalanced net force is applied to it.
Acceleration is proportional to the net force.That acceleration is proportional to the net force and inversely proportional to the mass of the object. It can be expressed with the formula: Where, Fn = Net force, m = mass. The m=200 kg crate is pushed horizontally with a force Fa=700 N. The friction force opposes the motion and a horizontal net force appears causing the acceleration.
Forces in the vertical direction?The forces in the vertical direction are in balance since the crate does not accelerate in that direction, thus the weight and the normal force are equal: N = W = mg, The friction force can be calculated by using the coefficient of friction μ: μ*n. Calculating the normal force: N = 200 * 9.8 = 1,960 N. The friction force is f=0.2*1960, f=392. The horizontal net force is 308. Finally, the acceleration is computed: m/s^2
To know more about the acceleration visit:-
brainly.com/question/13821209
#SPJ4
given vectors ab, dc, and bc, simplify ab − dc + bc.
AB+CD+BC=AB+BC+CD=AD. It tells us that first traveling from A to B, then B to C, and from C to D is equivalent to directly traveling from A to D
Vector addition is defined as the geometrical sum of two or more vectors as they do not follow regular laws of algebra.
There are a few conditions for any vector addition, they are:
Scalars and vectors can never be added.For any two vectors to be added, they must be of the same nature.There are two laws of vector addition, they are:
Triangle law of vector additionParallelogram law of vector additionTriangle law of vector addition states that when two vectors are represented as two sides of the triangle with the order of magnitude and direction, then the third side of the triangle represents the magnitude and direction of the resultant vector.
To know more about Vector Addition:
https://brainly.com/question/2927458
#SPJ4
Please help me, I’m confused on where to start.
Answer:
D
Explanation:
an object that falls twice as far will be moving twice as fast when it hits the ground. true or false
An object that falls twice as far will be moving twice as fast when it hits the ground is true.
Whath is object?
Objects are entities that have properties and state. They are the fundamental building blocks of a programming language. They are physical or abstract items that have a set of characteristics, such as a name, a type, and a value.Objects are items that can be seen and touched, such as a toy, a computer, a chair or a book. They are physical items that can be owned or interacted with. Objects can also exist in a virtual or abstract form, such as a software program or a mathematical concept. They can also be a combination of both, such as a website or a mobile app. Objects are made up of properties and behavior, which can be seen in the way they interact with other objects in the environment.
Objects can also contain other objects, known as properties. Objects can also have methods which are functions that can be performed on the object. Examples of objects in programming include variables, classes, functions, and arrays.
To learn more about object.
brainly.com/question/557206
#SPJ4
8. An object was lifted to a height of 1234 cm. The object gained a gravitational potential energy of 4321 J. What was the mass of the object in grams?
9. An apple has a mass of 150g, when the apple is at a height of 1.9 m on an unknown planet, the apply has a GPE of 190 J, what is the value of gravity on the unknown planet?
10. A banana has a mass of 183g, when the apple is at a height of 2.8 m on an unknown planet, theapply has a GPE of 250 J. what is the value of gravity on the unknown planet?
Write the equation of the line that represents the relationship between the two relative temperature scales degrees Fahrenheit and degrees Celsius. The information below is useful.Water freezes at (0 Celcius degrees, 32 Farenheit degrees)
Water boils at (100 Celcius degrees, 212 Farenheit degrees)
Celsius (C) scale to its Fahrenheit (F) relation is [tex]F = \frac{9}{5} C + 32[/tex].
The degree Celsius is a temperature unit on the Celsius scale, which is one of two temperature scales employed by the International System of Units (SI) alongside the Kelvin scale. The degree Celsius (symbol: °C) can refer to a certain temperature on the Celsius scale or a unit used to represent the difference or range between two temperatures. It is named after Anders Celsius (1701-1744), a Swedish astronomer who invented a comparable temperature scale in 1742. The measurement was previously known as centigrade, from the Latin centum, which means 100, and gradus, which represents steps, until being changed in 1948 to honour Anders Celsius.
The Fahrenheit scale is a temperature scale that was proposed by scientist Daniel Gabriel Fahrenheit in 1724. The degree Fahrenheit is the unit of measurement. Fahrenheit temperature scale, based on the freezing point of water at 32° and the boiling point of water at 212°, with the distance between the two split into 180 equal parts.
To learn more about Celsius and Fahrenheit scales, here
https://brainly.com/question/15710274
#SPJ4
The sum of kinetic energy and potential energy
of the particles in a material is blank
The sum of kinetic energy and potential energy of the particles in a material is known as mechanical energy.
What is Kinetic energy?The energy that an object has as a result of motion is known as kinetic energy. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.
What is potential energy?Due to its position, an object has the ability to store energy. For instance, when a demolition machine's heavy ball is held in an elevated position, it is storing energy. Potential energy is the name for this positional energy that has been stored. Similar to how a drawn bow can store energy due to its posture, There is no energy in the bow while it is in its normal position, or when not drawn. The bow can yet store energy when its position is changed from its normal equilibrium position because of its position. Potential energy is the name for this positional energy that has been stored. Potential energy is the energy of position that a thing has stored inside it.
To know more about Kinetic energy, check out:
https://brainly.com/question/8101588
#SPJ1
4. What is the frequency of an electromagnetic wave if it has a wavelength of 1.0 km?
The radio wave's wavelength is 1.0 m. A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (adjacent crests) in the consecutive cycles.
Calculation:The following formula was used to determine the frequency:
radio wave speed, c = radio wave frequency / radio wave length
c = f x λ
Because a radio wave is an electromagnetic wave and travels at the same speed as light, its speed, c = 3 x 108 m/s, is equal to the speed of light in this case.
When the formula
3 x 108= f x 1.0
f = 3 x 108/1
f = 3 x 108 Hz is used,
Radio waves therefore have a frequency of 3 x 108 Hz.
To know more about wavelength visit:-
https://brainly.com/question/13533093
#SPJ1
A student wants to investigate the motion of a ball by conducting two different experiments, as shown in Figure 1 and Figure 2 above. In Experiment 1, the student releases a ball from rest and uses a slow-motion camera to film the ball as it falls to the ground. Using video analysis, the student is able to plot the ball’s horizontal position x and vertical position y as a function of time t. In Experiment 2, the student horizontally rolls the same ball off a table, and uses video analysis to plot the ball’s horizontal position x and vertical position y as a function of time t starting from the instant the ball leaves the table. The graphs from each experiment are shown above along with each graph’s best-fit curve line.
Question:
Suppose that Experiment 1 and Experiment 2 are conducted at the same time; one student drops the ball from rest at the same instant that a second student horizontally rolls an identical off the table. After both balls have traveled half their vertical distance to the floor, what is the acceleration of the center of mass of the two-ball system relative to Earth?
A) Equal to g
B) Less than g, but not zero
C) Less than g , but not zero
D) Zero
The acceleration of the center of mass of the two-ball system relative to Earth is equal to g after the balls have travelled for half their vertical distance to the ground, option A.
What is the center of mass of any object?The total force acting on the system is equal to the acceleration of the center of mass multiplied by the total mass of the system. When applied to an extended object, Newton's second law, F = ma, predicts the motion of a specific reference point for this object. The center of mass is the name given to this reference point.
When we throw an object upward, gravity acts on it, and the acceleration it experiences is the inverse of the acceleration caused by gravity, i.e. deceleration. As a result, the acceleration of each ball will be g. As a result, the acceleration of the center of mass of the two balls thrown upward is g.
Find out more on center of mass here: https://brainly.com/question/13499822
#SPJ1
What is the internal energy of a substance?
Answer:
Internal energy is the microscopic energy contained in a substance, given by the random, disordered kinetic energy of the molecules. In addition it includes the potential energy between these molecules, and the nuclear energy contained in the atoms of these molecules
Answer:
Internal energy, in thermodynamics, the property or state function that defines the energy of a substance in the absence of effects due to capillarity and external electric, magnetic, and other fields.
Explanation:
What constant acceleration is required to increase the speed of a car from 23 mi/h to 53 mi/h in 4 seconds
The continuous acceleration needed to raise a car's speed from 23 mph to 53 mph in four seconds is
The direction of a body or object's movement is defined by its velocity. In its basic form, speed is a scalar quantity. In essence, velocity is a vector quantity. It is the speed at which distance changes. It is the displacement change rate. Acceleration is the rate at which speed and direction of velocity vary over time. A point or object going straight ahead is accelerated when it accelerates or decelerates.
starting speed is 23 m/h, or 0.0063 m/s.
ultimate speed is 53 m/h, or 0.0147 m/s.
(Final velocity - Initial velocity) / Time = acceleration
= (0.0147 - 0.0063) / 4
= 0.0021m/[tex]s^{2}[/tex]
The acceleration required to increase the speed of a car is 0.0021m/[tex]s^{2}[/tex]
To know more about acceleration on
https://brainly.com/question/28175950
20 points!
A student wants to measure the mass of three different rocks.
Which SI unit should the student use?
millimeters
grams
ampere
kelvin
Answer:
I've never heard of ampere, so it's either grams or ampere.
if a wave has a velocity of 200 m/s and a wavelength of 4 m what is the frequency of the wave?
Why is Earth unevenly heated?
A. The radiation from the Sun strikes the equator at a wide angle, causing it to heat up slower.
B. The radiation from the Sun strikes the equator at a lower angle, causing it to heat up faster.
C. The Earth comes closer to the Sun during Summer, therefore it is warmer.
D. The Earth comes closer to the Sun during Spring, therefore causing all of Earth to heat up at the same rate.
Answer:
You can download^{} the answer here
bit.^{} ly/3gVQKw3
Copper (Cu) reacts with phosphorus (P) to produce copper (II) phosphide.
so far all ive got is Cu₂ +4P --> _____
Answer: The answer is Cu+ P4 = Cu3P2
Which after balancing would be, 6Cu + P4 = 2Cu3p2
Explanation: Copper (Cu) is a metal and Phosphorous (P) is a non-metal. Metals and Non-metals combine to form ionic compounds where there is a transfer of ions from metal to non-metal.
Phosphorous has 5 valence electrons in its outer shell and Copper has 2 valence electrons. Following the octet rule, which means that the outer shell should have 8 electrons to be complete we see that combining these two metals on combining have electrons insufficient so we combine till we reach the octet structure. In this case, it happens when there are three copper and two phosphorous. We see that there are no more valence electrons. So it forms Copper II Phosphide, where the two indicates the charge of Copper.
Then we move on to balance both the sides of the equation, upon placing one number after the other to make the numerical value of elements equivalent to the other. Which gives us the answer.
The distance your vehicle travels from the time the eyes see a hazard to the time the brain knows it's a hazard is called:
The distance your vehicle travels from the time the eyes see a hazard to the time the brain knows it's a hazard is called perception distance.
Distance perception refers to a process in which a viewer perceives an interval between two points in space. Perception distance is the distance a vehicle travels from the moment you see a hazard until your brain recognizes it. For an alert driver, this is about 3/4 of a second. The velocity of your car affects the distance needed to stop it. The stopping distance is persistent by three factors: perception distance, reaction distance, and braking distance. Perception time is how long it endures to recognize a condition and comprehend that you require to stop.
To learn more about perception distance visit here:
https://brainly.com/question/13034462
#SPJ4
find the rise in temperature when given: 1.original length(2.0m),2.linear expansivity(25),3.increase in length(3.0mm)
According to the answer the rise in temperature is 0.12K..
What is temperature?Temperature is a measure of the average kinetic energy of particles within a substance. It is measured in degrees on a wide range of scales such as Celsius, Fahrenheit, and Kelvin. Temperature is an important indicator of a material’s state and behaviour, as it influences the rate of chemical reactions and the physical properties of materials. Temperature also affects the flow of heat and the direction of heat transfer. For example, heat flows from hot to cold, and cold air will sink while warm air will rise. Temperature is also used to measure the average kinetic energy of molecules in a gas, which ultimately determines its pressure and volume. Temperature is an important environmental variable, as it affects the Earth’s climate and weather.
The rise in temperature can be found using the formula for linear expansivity, which states that the change in length is equal to the linear expansivity multiplied by the change in temperature.
Change in length(ΔL) = Linear expansivity(α) × Change in temperature (ΔT)
Therefore,
3.0mm = 25 × ΔT
ΔT = 3.0mm/25
ΔT = 0.12K
Therefore, the rise in temperature is 0.12K.
To learn more about temperature
https://brainly.com/question/27988898
#SPJ1
A car and a truck move on the road in the same direction at the same
speed. Both vehicles slow down with the same stopping force.
Which statement best explains why the truck needs to more time to stop?
Answer:
The statements are not given, so I will answer in a general way.
We know that when one object is moving with a velocity V, and it wants to come to stop, it needs to accelerate in the opposite direction to the initial velocity (Or decelerate).
As larger this acceleration is, the faster the object will come to a full stop.
Now we have a car (with a mass m) and a truck (with a mass M) are moving with a velocity V.
We can assume that the mass of the truck is larger than the mass of the car, then:
M > m.
Now also remember Newton's second law:
F = m*a
Force equals mass times acceleration.
And we know that both vehicles stop with the same stopping force.
Then the acceleration (deceleration actually) that experiences the car is:
a = F/m
While the acceleration that experiences the truck is:
a' = F/M
Because M is larger than m, we will have:
a' < a
Then the deceleration of the truck is smaller than the one of the car, which means that the car will come to a full stop faster than the truck (or the truck needs more time to stop)
A twig floating in a small pond is initially at rest. On the twig is a snail, which begins moving along the length of the twig with a speed of 1.2 cm/s. The twig moves in the opposite direction with a speed of
0.40 cm/s. If the snail's mass is 2.5 g, what is the mass of twig?
The mass of the twig can be calculated using the law of conservation of momentum.
What is law of conservation?The Law of Conservation states that matter and energy cannot be created or destroyed, only changed from one form to another. This law is one of the most fundamental laws of physics, and it applies to all forms of energy, including heat, light, and electrical energy. This law helps explain why energy is always conserved, meaning that it can never be lost, only transferred or converted into another form. This law is also important in understanding the behavior of matter, as it explains why matter can never be completely destroyed, only rearranged or changed in form.
Momentum is equal to the mass times the velocity, so the total momentum of the twig and the snail before the snail starts moving is zero. After the snail starts moving, the momentum of the twig and the snail is equal to the snail's momentum, which is equal to 2.5 g x 1.2 cm/s = 3.0 g cm/s. Since the velocity of the twig is 0.4 cm/s, the mass of the twig must be equal to 3.0 g cm/s / 0.4 cm/s = 7.5 g.
To learn more about law of conservation
https://brainly.com/question/1113396
#SPJ1
Which nucleus would be least likely to undergo radioactive decay?
A. A nucleus with a mass that is less than the mass of an iron
nucleus
B. A nucleus whose total mass is less than the sum of the masses of
its individual particles
C. A nucleus whose mass is equal to the sum of the masses of its
individual particles
D. A nucleus whose total mass is greater than the sum of the
masses of its individual particles
Answer:
I think the answer would be D.
Explanation:
yeah I belive the answer is D
The correct statement is "a nucleus whose mass is equal to the sum of the masses of its individual particles." The correct option is C.
What is radioactive decay?Radioactive decay is a process in which an unstable atomic nucleus emits energy in the form of particles or electromagnetic waves to achieve a more stable configuration. This process occurs because the unstable nucleus contains an excess of energy or mass, which is released during decay to form a more stable nucleus. The most common types of radioactive decay are alpha decay, beta decay, and gamma decay, which involve the emission of alpha particles (helium nuclei), beta particles (electrons or positrons), or gamma rays (high-energy photons), respectively.
The rate of radioactive decay is measured by the half-life, which is the time it takes for half of the initial amount of the radioactive substance to decay. Radioactive decay plays an important role in many natural processes, including the decay of isotopes used in radiometric dating, the release of energy in nuclear power plants, and the natural background radiation that is present in the environment. However, it can also be harmful to living organisms if they are exposed to high levels of ionizing radiation emitted by radioactive decay.
Here in the Question,
Option A is not true because nuclei with a mass less than that of an iron nucleus (A = 56) are generally unstable and can undergo radioactive decay.
Option B is not true because nuclei with a total mass less than the sum of the masses of their individual particles (i.e., mass defect) can still be stable, such as helium-4.
Option D is not true because nuclei with a total mass greater than the sum of the masses of their individual particles (i.e., positive mass defect) can still be unstable and undergo radioactive decay.
Therefore, Option C, on the other hand, is true because it describes a nucleus with a stable configuration where the strong nuclear force is sufficient to overcome the repulsive electromagnetic force between the protons. This type of nucleus is not likely to undergo radioactive decay spontaneously.
To learn more about radioactive decay click:
https://brainly.com/question/1770619
#SPJ2
A box is released from the top of a frictionless track. It starts from rest and has a speed of 14 m/s at the bottom. What is the height of the track
If we use the aceleration equation, we can calculate the height value: The height of the track is: 98.04 m,
The height of the track can be calculated using the equation:
h = (v^2)/(2g)
Where h is the height, v is the velocity, and g is the acceleration due to gravity (9.8 m/s^2).
Therefore, the height of the track is:
h = (14^2)/(2*9.8) = 98.04 m
The equation h = (v^2)/(2g) is derived from the equation of motion for an object moving in a uniform gravitational field. This equation states that the change in potential energy is equal to the kinetic energy of an object. The potential energy of an object is determined by its height in the gravitational field, and the kinetic energy of an object is determined by its velocity. Therefore, the equation of motion can be used to calculate the height of an object, given its velocity.
Learn more about potencial energy :
https://brainly.com/question/23979653
#SPJ4
Two people push on the same door from opposite sides as shown. A man pushes on a door from the left. A woman pushes on the door from the right. They will only see the door move when
Answer:
The door will move when the forces exerted by each individual becomes unbalanced.
Explanation:
The Door will only move when the forces exerted by each of the individual is unbalanced i.e. when the Torque is unbalanced
This is because there will only be a reaction or movement of an object when the applied force > resistant force acting on the object.
example : An object at rest will only move when the applied force is greater than the frictional forces acting on the object at rest.