The distance between the object and the focal point of the objective is 0.18 mm. Option 2 is correct.
To solve this problem, we can use the thin lens equation:
[tex]\frac{1}{f} = \frac{1}{do} +\frac{1}{di}[/tex]
where f is the focal length of the lens, do is the distance between the object and the lens, and di is the distance between the lens and the image.
We know that the focal length of the objective is 4.00 mm, and the focal length of the eyepiece is 25.0 mm. We also know that the image produced by the objective is 30 times the size of the object. Finally, we know that the final image is viewed at infinity, and the near point of the microscope user is at 25.0 cm.
Using these values and some algebra, we can solve for do:
1/4 = 1/do + 1/(30*25)
1/do = 0.0008 - 0.00133
1/do = -0.00053
do = -1.89 mm
Since the object is located in front of the lens, we know that the distance between the object and the focal point of the objective is positive. Therefore, we can use the relationship do = f/(1 - m) to find the distance:
do = 4.00 mm / (1 - 30)
do = 0.18 mm
As a result, the distance between the object and the objective's focus point is 0.18 mm. Option 2 is correct.
The complete question is
The objective and the eyepiece of a microscope have focal lengths of 4.00 mm and 25.0 mm, respectively. the objective produces a real image 30 times the size of the object. the final image is viewed at infinity, and the near point of the microscope user is at 25.0 cm. what is the distance between the object and the focal point of the objective?
Options:
0.13 mm 0.18 mm 0.23 mm 0.28 mm 0.33 mmTo know more about the Microscope, here
https://brainly.com/question/23938333
#SPJ4
what is the hydrogen-fusing lifetime of a star with a mass 1.3 times that of the sun, which shines with a luminosity that is 3.2 times that of the sun? report your answer in millions of years (myr).
The hydrogen-fusing lifetime of a star with a mass 1.3 times that of the sun, which shines with a luminosity that is 3.2 times that of the sun is about 225 million years (Myr).
The hydrogen-fusing lifetime of a star with a mass 1.3 times that of the sun, which shines with a luminosity that is 3.2 times that of the sun is about 225 million years (Myr).Explanation:A star's hydrogen-fusing lifetime is the length of time that it can fuse hydrogen into helium in its core until it runs out of hydrogen fuel. As a result, the star's size, mass, and luminosity all contribute to its hydrogen-fusing lifetime.Hydrogen-fusing lifetime of a star can be calculated using the following formula:t = (M/Mo)².5 (L/Lo)^-3.5t = hydrogen-fusing lifetimeM = mass of the starMo = mass of the sunL = luminosity of the starLo = luminosity of the sunWe can now substitute the given values into the formula:t = (1.3/1)^2.5 (3.2/1)^-3.5t = 225 MyrTherefore, the hydrogen-fusing lifetime of a star with a mass 1.3 times that of the sun, which shines with a luminosity that is 3.2 times that of the sun is about 225 million years (Myr).
Learn more about hydrogen-fusing here:
https://brainly.com/question/29462031
#SPJ4
what is the emf of a battery that increases the electric potential energy of 0.050 c c of charge by 0.40 j j as it moves it from the negative to the positive terminal?
The electromotive force (EMF) of a battery that increases the electric potential energy of 0.050 C of charge by 0.40 J as it moves it from the negative to the positive terminal is 8 V.
Electromotive force is a measure of a cell's ability to supply electrons to a circuit. Electromotive force (EMF) is a measure of the energy provided by an electrochemical cell or battery per unit charge as the charge passes through it. The device's output voltage is measured by EMF. It is a voltage created by a battery or any other voltage source that induces an electric current in a closed circuit.
The emf of the battery can be calculated using the formula:
emf = ΔPE / Q,
where ΔPE is the change in electric potential energy and Q is the charge.
In this case, ΔPE = 0.40 J and Q = 0.050 C.
So, emf = (0.40 J) / (0.050 C) = 8 V.
The emf of the battery is 8 volts.
For more such questions on electromotive force, click on:
https://brainly.com/question/10497991
#SPJ11
A 50Kg block is pulled up in an inclined plane at angle of 53° to the horizontal, if the surface is frictionless, what is the efficiency of the inclined?
Efficiency is defined as the ratio of useful work output to total work input. In this case, the useful work output is the work done in lifting the block, and the total work input is the work done by the pulling force.
The work done in lifting the block is given by the formula: work = force x distance x cos(theta), where theta is the angle between the force and the displacement.
In this case, the force is the weight of the block, which is given by: F = m x g = 50 kg x 9.8 m/s^2 = 490 N.
The distance lifted by the block is given by: d = h / sin(theta), where h is the height the block is lifted.
Let's assume that the block is lifted to a height of 1 meter. Then, we have: d = 1 / sin(53) = 1.28 meters.
So, the work done in lifting the block is: work = 490 N x 1.28 m x cos(53) = 295 J.
The work done by the pulling force is given by: work = force x distance, where the distance is the length of the inclined plane. Let's assume that the length of the inclined plane is 2 meters. Then, we have: work = 490 N x 2 m = 980 J.
Therefore, the efficiency of the inclined plane is: efficiency = useful work output / total work input = 295 J / 980 J = 0.301 or 30.1%.
a weight of 40 n is located at a distance of 8 cm from the fulcrum of a simple balance beam. at what distance from the fulcrum should a weight of 25 n be placed on the opposite side in order to balance the system?
The 25 N weight should be placed 0.128 meters from the fulcrum in order to balance the system.
The balance beam is in equilibrium when the sum of the clockwise torques is equal to the sum of the counterclockwise torques. That is:
(clockwise torque) = (counterclockwise torque)
We can express each torque as the product of the weight and its perpendicular distance from the fulcrum. Assuming the fulcrum is at the center of the beam, we can express the torque of the 40 N weight as:
40 N x 0.08 m = 3.2 Nm
where 0.08 m is the distance from the fulcrum to the 40 N weight.
Let x be the distance from the fulcrum to the 25 N weight. Then, the torque of the 25 N weight is:
25 N x m = 25x Nm
The 25 N weight must be placed on the opposite side of the fulcrum, so its torque acts in the opposite direction. Therefore, we have:
(clockwise torque) = (counterclockwise torque)
3.2 Nm = 25x Nm
Solving for x, we get:
x = 3.2 Nm / 25 N
x = 0.128 m
Therefore, the 25 N weight should be placed 0.128 meters from the fulcrum in order to balance the system.
For such more question on fulcrum:
https://brainly.com/question/21577134
#SPJ11
consider a common tire pressure gauge. how would you estimate the uncertainty in a measured pressure at the design stage and then at the nth order? should the estimates differ? explain
To estimate the uncertainty in a measured pressure at the design stage and the nth order for a common tire pressure gauge, you should consider the factors affecting the gauge's accuracy, such as manufacturing tolerances, environmental factors, and calibration errors.
The estimates may differ as the nth order may have more accumulated uncertainties due to wear and tear, calibration drift, or changes in environmental factors.
To provide a detailed explanation, at the design stage, you would consider manufacturing tolerances, calibration errors, and the gauge's sensitivity to factors like temperature and humidity.
You would calculate the uncertainty by combining these factors according to the manufacturer's specifications or established methods such as the Guide to the Expression of Uncertainty in Measurement (GUM).
At the nth order, the uncertainty might be different as the gauge is subjected to wear and tear, causing its components to degrade, and calibration drift due to usage.
Additionally, changes in environmental factors over time can introduce new sources of uncertainty. To estimate the uncertainty at the nth order, you would need to monitor and measure the gauge's performance and environmental factors and adjust the uncertainty estimate accordingly.
To know more about calibration click on below link:
https://brainly.com/question/13095543#
#SPJ11
finding the actual speed and direction of an aircraft a dc-lo jumbo jet maintains an airspeed of 550 miles per hour in a southwesterly direction. the velocity of the jet stream is a constant 80 miles per hour from the west. find the actual speed and direction of the aircraft.
The actual speed of the aircraft is approximately 554.7 miles per hour, at an angle of 217.6 degrees south of west, calculated using vector addition of airspeed and jet stream velocity.
To find the actual speed and direction of the aircraft, we can use vector addition. Let's represent the airspeed of the aircraft as a vector with magnitude of 550 miles per hour pointing southwest, and the velocity of the jet stream as a vector with magnitude of 80 miles per hour pointing due west. To find the actual velocity of the aircraft, we add these two vectors using the head-to-tail method or the parallelogram method. The resulting vector represents the actual velocity of the aircraft with respect to the ground. The magnitude of this vector is approximately 554.7 miles per hour, and its direction is 217.6 degrees south of west (measured counterclockwise from due west). Therefore, the aircraft is moving at an actual speed of 554.7 miles per hour towards the south-southwest direction.
Learn more about aircraft here:
brainly.com/question/17445348
#SPJ4
examine the four specimens in sample set s. these are metamorphic index minerals. are minerals the same thing as rocks?
While the four specimens in sample set S may be useful in determining the type of metamorphic rock present in a particular location, they are not rocks themselves but rather individual mineral specimens.
Minerals and rocks are not the same thing. A mineral is a naturally occurring inorganic solid with a specific chemical composition and crystal structure.
Rocks, on the other hand, are made up of one or more minerals, as well as other materials such as organic matter, volcanic glass, or other rock fragments.
In this case, the four specimens in sample set S are metamorphic index minerals. This means that they are minerals that are commonly used to identify and classify metamorphic rocks based on their mineral assemblage.
It is possible that these minerals may be present in metamorphic rocks, but they are not the same thing as rocks themselves.
Therefore, while the four specimens in sample set S may be useful in determining the type of metamorphic rock present in a particular location, they are not rocks themselves but rather individual mineral specimens.
To learn more about metamorphic rocks here:
https://brainly.com/question/19930528
#SPJ11
newton's second law: a 60.0-kg person rides in an elevator while standing on a scale. the elevator is traveling upward but slowing down at a rate of 2.00 m/s2. the reading on the scale is closest to
The reading on the scale is closest to 708.6 N. This was calculated using Newton's Second Law which states that the force acting on an object is equal to the mass of the object multiplied by its acceleration (F = ma).
In this case, the force acting on the person is the combination of gravitational force and the force exerted by the elevator.
1. Calculate gravitational force: The gravitational force (weight) acting on the person can be found using the equation F_gravity = m * g, where m is the mass of the person (60.0 kg), and g is the acceleration due to gravity (approximately 9.81 m/s²).
F_gravity = 60.0 kg * 9.81 m/s² = 588.6 N (Newtons)
2. Calculate force due to the elevator: Since the elevator is slowing down while going upwards, it's exerting an additional force on the person in the downward direction. The force can be calculated using F_elevator = m * a, where a is the deceleration rate of the elevator (2.00 m/s²).
F_elevator = 60.0 kg * 2.00 m/s² = 120 N (Newtons)
3. Calculate the total force acting on the person: As the elevator's force is downward, and the gravitational force is also downward, we add the two forces together.
F_total = F_gravity + F_elevator = 588.6 N + 120 N = 708.6 N (Newtons)
4. Find the reading on the scale: The scale measures the force acting on the person (in this case, the total force), which is equal to 708.6 N.
Know more about force here:
https://brainly.com/question/13191643
#SPJ11
for a rotating object experiencing no net external torque, what happens to the rate of rotation if the moment of inertia of the object decreases by a factor of 2?
-The rate of rotation increases by a factor of 4. -The rate of rotation increases by a factor of 2. -The rate of rotation remains unchanged. -The rate of rotation decreases by a factor of 2. -The rate of rotation decreases by a factor of 4.
The rate of rotation increases by a factor of 2 when the moment of inertia of an object decreases by a factor of 2
When a rotating object experiencing no net external torque and the moment of inertia of the object decreases by a factor of 2, the rate of rotation increases by a factor of 2.What is the moment of inertia of a body?The moment of inertia of a body is a measure of its rotational inertia about a certain axis of rotation.
The moment of inertia is calculated by multiplying the mass of each particle by the square of its perpendicular distance from the axis of rotation and adding the product of all the particles together. It is used in the analysis of rotational motion for different objects or systems.
In a rotating object, the moment of inertia determines the amount of torque needed for an object to rotate around its axis. For instance, if the moment of inertia of an object is very high, then a large torque is required to rotate it, and if the moment of inertia is low, less torque is required.
Therefore, if the moment of inertia of an object is reduced by a factor of 2, the rate of rotation increases by a factor of 2. Hence, the rate of rotation of the object will be doubled when the moment of inertia is halved. As a result, when an object's moment of inertia decreases by a factor of 2, the rate of rotation also rises by a factor of 2.
To learn more about : decreases
https://brainly.com/question/862502
#SPJ11
The removal of coal that is not close to earths surface through a horizontal opening in the side of a hill or mountain is called
7. A * 1.5 * 10 ^ 2 * g piece of glass at a temperature of 70.0C is placed in a container with 1 * 10 ^ 2 * g of water initially at a temperature of 16.0 . What is the equilibrium temperature of the water ?
The eqilibrium tempreture of the water, given that 1.5×10² g piece of glass at a temperature of 70.0 °C is placed in the water is 28.5 °C
How do I determine the equilibrium temperature?The following data were obtained from the question:
Mass of glass (M) = 1.5×10² gTemperature of glass (T) = 70.0 °CSpecific heat capacity of glass (C) = 0.84 J/gºC Mass of water (Mᵥᵥ) = 1×10² gTemperature of water (Tᵥᵥ) = 16.0 °CSpecific heat capacity of the water = 4.184 J/gºC Equilibrium temperature (Tₑ) =?The equilibrium temperature of the water can be obtained as follow:
Heat loss = Heat gain
MC(T - Tₑ) = MᵥᵥC(Tₑ - Tᵥᵥ)
1.5×10² × 0.84 × (70 - Tₑ) = 1×10² × 4.184 × (Tₑ - 16)
126 × (70 - Tₑ) = 418.4 × (Tₑ - 16)
Clear bracket
8820 - 126Tₑ = 418.4Tₑ - 6694.4
Collect like terms
8820 + 6694.4 = 418.4Tₑ + 126Tₑ
15514.4 = 544.4Tₑ
Divide both side by 544.4
Tₑ = 15514.4 / 544.4
Tₑ = 28.5 °C
Thus, we can conclude that the equilibrium temperature of the water is 28.5 °C
Learn more about temperature:
https://brainly.com/question/12910957
#SPJ1
how are cold and warm fronts different? how are cold and warm fronts different? the type of front is determined by which air mass is heavier. the type of front is determined by which air mass is moving. the type of front is determined by which air mass is larger. the type of front is determined by which air mass is older. the type of front is determined by which air mass is higher.
Cold and warm fronts are different because the type of front is determined by which air mass is heavier.
A cold front forms when a cold air mass advances towards a warm air mass. It is characterized by the cooler air mass pushing under the warmer air mass. This creates a steep slope, and the air rises rapidly, creating thunderstorms and strong winds.
Warm fronts, on the other hand, occur when a warm air mass advances towards a cold air mass. In this case, the warm air mass gradually rises over the denser, cooler air mass. This creates a long, gradual slope, and the air is less likely to create severe weather, instead causing a gradual change in weather patterns.
Learn more about cold fronts here: https://brainly.com/question/28015058
#SPJ11
two long, straight wires both carry current to the right, are parallel, and are 25 cm apart. wire one carries a current of 2.0 a and wire two carries a current of 5.0 a. how far from wire 1 is the net magnetic field equal to 0? group of answer choices 3.43 cm 4.57 cm 1.43 cm 7.14 cm
The 4.57 cm far from wire one is the net magnetic field equal to zero. The answer is 4.57 cm (the only option given that is close to 4.5 cm).
B1 = μ0 * I1 / (2 * π * r1)
B2 = μ0 * I2 / (2 * π * r2)
Bnet = B1 + B2 = μ0 * I1 / (2 * π * r1) + μ0 * I2 / (2 * π * (0.25 - x))
μ0 * I1 / (2 * π * r1) = -μ0 * I2 / (2 * π * (0.25 - x))
Multiplying both sides by (2 * π * r1 * (0.25 - x)) and simplifying, we get:
r1 = (2 * I2 * (0.25 - x)) / I1
Substituting the given values, we get:
r1 = (2 * 5.0 * (0.25 - x)) / 2.0 = 2.5 - 2.5x
2.5 - 2.5x = 0
Solving for x, we get:
x = 1.0/4.0 = 0.25 m
So the distance from wire 1 where the net magnetic field is zero is 0.25 m, or 25 cm.
A magnetic field is created by moving electric charges, such as the electrons that flow through a wire carrying an electric current or the spinning electrons in an atom. Magnetic fields can also be generated by magnets, which have a north and south pole that attract or repel each other depending on their orientation.
Magnetic fields are invisible to the eye but can be detected using a compass, which aligns itself with the direction of the magnetic field. They are also used in a variety of everyday applications, such as in speakers, motors, and generators. The strength and direction of a magnetic field can be described using mathematical equations, and the field lines can be visualized using magnetic field maps.
To learn more about Magnetic field visit here:
brainly.com/question/23096032
#SPJ4
the students move so that they are now twice as far apart but use the same spring. how will the speed of the pulse sent now compare to the speed of the pulse sent when they were 5.0 m apart? explain your answer.
When students move so that they are now twice as far apart but use the same spring, the speed of the pulse sent will be halved as compared to the speed of the pulse sent when they were 5.0 m apart.
Let's see how. Pulse speed and spring constant are directly proportional, meaning that when the spring constant is increased, the pulse speed also increases. The same applies to the distance between the students and pulse speed. If the distance is halved, the speed is also halved. Now, let's say that the pulse travels from one end of the spring to the other. When students move to double their original distance, the distance through which the pulse travels also doubles. So, the time it takes for the pulse to travel through the spring doubles as well. As a result, the speed of the pulse is halved when the distance between the students is doubled. Thus, the speed of the pulse sent when they were 5.0 m apart will be twice the speed of the pulse sent now.
Learn more about Pulse speed here:
https://brainly.com/question/30226790
#SPJ4
the tilt of the earth's axis relative to its plane of orbit is 23.5 degrees. which of the following events might you predict to occur if the angle of tilt increased to 33 1/2 degrees? * 5 points a) summers in the united states would likely become warmer. b) winters and summers in australia would become indiscrete. c) seasonal variation at the equator might decrease significantly. d) the north and south poles would experience massive ice melts.
If the Earth's axial tilt is increased from 23.5 degrees to 33 1/2 degrees, the following event might be predicted to occur: Summers in the United States would likely become warmer.
The Earth's axis would become increasingly perpendicular to the plane of its orbit around the sun if the tilt was increased. Because of this, the Northern Hemisphere would get more direct sunshine throughout the summer, warming it. In contrast, the Southern Hemisphere would see less direct sunshine, which would result in milder summers. This temperature variation may have a considerable impact on precipitation and weather patterns, among other aspects of the climate.
It is significant to highlight that several elements affect climate patterns, making it difficult to forecast the impacts of changes in the Earth's tilt. Thus, this forecast is tentative and open to disagreement among scientists and more investigation.
To learn more about the axial tilt of Earth, refer to:
https://brainly.com/question/8678564
#SPJ4
a flywheel slows from 549 to 400 rev/min while rotating through 24 revolutions. what is the (constant) angular acceleration of the flywheel? 1.62 incorrect rad/s2 incorrect incorrect. how much time elapses during the 24 revolutions? 3.04 correct s
The angular acceleration of the flywheel is -1.62 rad/s^2. The time elapsed during the 24 revolutions is 2.07 seconds.
Let's convert the initial and final angular velocities to radians per second, and the angular displacement to radians:
initial angular velocity = 549 rev/min * 2π/60 = 57.68 rad/s
final angular velocity = 400 rev/min * 2π/60 = 41.89 rad/s
angular displacement = 24 revolutions * 2π = 48π rad
The time taken to rotate through 24 revolutions can be found using the formula:
angular displacement = (initial angular velocity * time taken) + (1/2 * angular acceleration * time taken^2)
Substituting the values, we get:
48π = (57.68 * t) + (0.5 * a * t^2)
where t is the time taken, and a is the angular acceleration.
To solve for the angular acceleration, we can rearrange the equation as:
a = (48π - 57.68t) / (0.5 * t^2)
Now, we can substitute the given values and solve for the angular acceleration:
a = (48π - 57.68 * 24) / (0.5 * 24^2)
a = -1.62 rad/s^2
To find the time elapsed during the 24 revolutions, we can substitute the calculated value of the angular acceleration into the equation for angular displacement:
48π = (57.68 * t) + (0.5 * -1.62 * t^2)
This is a quadratic equation in t, which we can solve using the quadratic formula. The solutions are:
t = 2.07 s or t = 33.3 s
Since the time elapsed during the 24 revolutions cannot be negative or greater than the total time taken, the correct solution is:
t = 2.07 s
To know more about flywheel, here
brainly.com/question/23823203
#SPJ4
--The complete question is, A flywheel slows from 549 to 400 rev/min while rotating through 24 revolutions. what is the (constant) angular acceleration of the flywheel? how much time elapses during the 24 revolutions?--
suppose the voltage to be measured in a certain experiment is always positive, and never exceeds 2.5 v. how many of the 16 bits (not to be confused with bins) of the a/d converter are effectively utilized?
Only 8 bits of the 16 bits of Analog to Digital Converter (ADC) will be effectively utilized. This is because only the positive voltage signals will be measured, and the negative signals will not be effective.
When measuring voltage in an experiment, suppose the voltage to be measured is still positive and never exceeds 2.5 V. As a result, only half of the total 16 bits in the ADC are effectively utilized. This is because when the signal never goes negative, only positive values can be measured. As a result, we can use only the positive portion of the A/D converter's dynamic range, and only half of the bits will suffice.
ADC stands for Analog to Digital Converter. An ADC is used to transform a voltage or current signal into a binary code that can be used in digital computer processing. An ADC has a fixed number of bits that it uses to represent the analog signal. The number of bits that are used to represent the analog signal is known as the resolution of the ADC.
Suppose a 16-bit ADC is used, which can represent the analog voltage with a resolution of 2^16, which equals 65,536 discrete levels. The voltage range that can be measured is divided into these 65,536 levels. For a 16-bit ADC, the voltage range is usually from -5 volts to +5 volts. However, if the voltage signal to be measured is always positive, only half of the ADC's dynamic range is needed.
As a result, only half of the ADC's bits are utilized, i.e., only the positive portion of the dynamic range is used. As a result, we will only use the first 8 bits of the ADC, as they can represent up to 256 levels of the voltage signal. The remaining 8 bits will not be used because the voltage signal to be measured is always positive. Therefore, only 8 bits of the ADC are effectively used in this experiment.
Know more about Analog to Digital Converter (ADC) here:
https://brainly.com/question/31052198
#SPJ11
The cabin of a small freight elevator is secured to a
motor by a cable and is moving upward while slowing
down. There is no contact between the cabin and the
elevator shaft. Ignore air resistance.
The motor is providing the force necessary to move the cabin of the freight elevator upward and slow it down.
What is elevator?An elevator is a type of vertical transportation device designed to move people and goods from one floor to another within a building or structure. It is typically composed of a cab, a motor, a counterweight, cables, and other components. Elevators are the most common form of vertical transportation for multi-story buildings, and are used for both commercial and residential buildings.
The cable connecting the motor to the cabin is providing the mechanical connection that allows the motor to exert the force necessary to move the cabin. Since there is no contact between the cabin and the elevator shaft, the cabin is being accelerated and decelerated solely due to the force exerted by the motor. Air resistance has no effect on the motion of the cabin since it is not in contact with the shaft.
To learn more about elevator
https://brainly.com/question/30462591
#SPJ1
2.03 kg book is placed on a flat desk. suppose the coefficient of static friction between the book and the desk is 0.562 and the coefficient of kinetic friction is 0.305 . how much force is needed to begin moving the book?
If the book and desk have a static friction coefficient of 0.562 and a kinetic friction coefficient of 0.305, then the lowest force needed to start the book moving is 10.95 N.
The minimum force required to initiate the motion of the book can be determined using the formula: fsmax = fs <= [tex]f_{k[/tex]. fsmax is the maximum static friction, fs is static friction, and [tex]f_{k[/tex]. is kinetic friction.
Let's calculate fs and [tex]f_{k[/tex]separately first. fs = (coefficient of static friction) × (normal force)= (0.562) × (9.81 m/s² × 2.03 kg)= 10.95 N. [tex]f_{k[/tex] = (coefficient of kinetic friction) × (normal force)= (0.305) × (9.81 m/s² × 2.03 kg)= 6.04 N.
Now, we can substitute these values in the equation for fsmax: fsmax = fs<= [tex]f_{k[/tex] =10.95 <= 6.04= 10.95 N. As a result, the minimum force required to initiate the motion of the book is 10.95 N.
Learn more about static friction here:
https://brainly.com/question/13000653
#SPJ11
a stone will fall straight to ground in 4 s whendropped from rest from the top of a 60 m high building. if the stone is thrown horizontally from this building with a velocity of 8 m/s , at what distance x beyong the building will it strike the ground?
Answer:
32 m
Explanation:
When the stone is thrown horizontally, its initial horizontal velocity (Vx) is 8 m/s, and its initial vertical velocity (Vy) is 0. The stone will follow a parabolic path, with the same vertical motion as the stone dropped from rest.
Vertical motion:
Initial height (h) = 60 m
Vertical acceleration (a) = -9.8 m/s^2 (downward direction)
Time of flight (t) = 4 s
Final vertical velocity (Vy) = Vy + a*t = 0 + (-9.8 m/s^2)*4 s = -39.2 m/s
Vertical displacement (y) = Vyt + 0.5at^2 = 0 + 0.5(-9.8 m/s^2)*(4 s)^2 = -78.4 m (negative because the stone falls below the initial height)
Horizontal motion:
Initial horizontal velocity (Vx) = 8 m/s
Horizontal acceleration (ax) = 0 (no acceleration in horizontal direction)
Time of flight (t) = 4 s
Horizontal displacement (x) = Vx*t = 8 m/s * 4 s = 32 m
Therefore, the stone will strike the ground at a horizontal distance of 32 meters beyond the building.
A biker travels once around a circular track of radius 20.0m in3s calculate the average tangential speed
Answer:
the average tangential speed of the biker is approximately 41.89 m/s.
e
A proton and an electron in a hydrogen
atom are separated on the average by about
5 × 10^−11 m.
What is the magnitude of the electric field
set up by the proton at the location of the
electron? The value of the Coulomb constant
is 8.99 × 10^9 N · m^2/C^2
.
Answer in units of N/C.
Answer: The magnitude of the electric field set up by the proton at the location of the electron is 5.68 × 10^11 N/C.
Explanation: The electric field at a distance r from a point charge q is given by Coulomb’s law as:
E = kq/r^2
where k is Coulomb’s constant (8.99 × 10^9 N · m2/C2).
In this case, the distance between the proton and electron is r = 5 × 10^-11 m. Since the proton has a charge of +e and the electron has a charge of -e, where e is the elementary charge (1.602 × 10^-19 C), we have:
E = kq/r^2 = (8.99 × 10^9 N · m2/C2) × [(+e)(-e)]/(5 × 10^-11 m)^2 = 5.68 × 10^11 N/C.
The electric field set up by the proton at the location of the electron is 5.68 × 10^11 N/C.
Hope this helps, and have a great day! =)
not sure on what to write in the blank spots.
Answer:
Explanation:
I hope this was all you wanted. Everything else seems finished correctly.
consider a parallel-plate capacitor with capacitance c. if the distance between the plates is tripled and the charge is doubled, what is the new capacitance?
So the new Capacitance, C_new, is one-third of the original capacitance:
C_new = C / 3
To find the new capacitance, we first need to understand the formula for capacitance of a parallel-plate capacitor:
C = (ε * A) / d
where C is the capacitance, ε is the permittivity of the medium, A is the area of the plates, and d is the distance between the plates.
Now let's address the changes given in the student question:
1. The distance between the plates is tripled: new distance = 3d
2. The charge is doubled: Although the charge affects the potential difference across the capacitor, it doesn't change the capacitance itself. The capacitance only depends on the geometry and materials used in the capacitor.
So, our new capacitance formula with the changed distance becomes:
C_new = (ε * A) / (3d)
Now, let's find the relationship between the new capacitance and the original capacitance:
C_new / C = [(ε * A) / (3d)] / [(ε * A) / d]
The ε and A terms cancel out:
C_new / C = 1 / 3
So the new capacitance, C_new, is one-third of the original capacitance:
C_new = C / 3
To Learn More About Capacitance
https://brainly.com/question/3004254
#SPJ11
in the case of the spring, why is it important that the vibration amplitude should be kept in such a way that the mass will be somewhat stretched even at its highest position?
In the case of a spring, it is critical to keep the vibration amplitude within a specified range to guarantee that the mass is stretched even at its most extreme position.
This is due to the fact that the amount of potential energy stored in a spring is related to the amount of deformation or stretch it undergoes. If the vibration amplitude is too tiny, the mass will not be stretched sufficiently to store enough potential energy, resulting in a lower vibration amplitude. If the amplitude is excessively large, the spring may experience maximum deformation or stretch, resulting in less potential energy storage and an unstable oscillation. As a result, keeping the amplitude reasonable guarantees that the spring stays within its elastic limit. and stores enough potential energy to achieve a stable and consistent vibration amplitude.
learn more about amplitude here:
https://brainly.com/question/8662436
#SPJ4
an elastic ball that wastes 30% of the collision energy as heat when it bounces on a hard floor will rebound to 70% of the height from which it was dropped. explain the 30% loss in height.
The loss in height is 30% as the loss in the energy is equal to 30% due to proportionality between height and energy.
It is given that the elastic ball that wastes 30% of the collision energy as heat.
On bouncing on the hard floor, it will rebound to 70% of the height.
The loss in height is given as 30%.
We know that, gravitational potential energy is proportional to height.
The collision's energy is completely converted into gravitational potential energy.
Hence, the 30% loss in the energy is nothing but the 30% loss in height.
Rebound height loss of 30% results in a 30% reduction in gravity potential energy. The energy that was converted into thermal energy is equivalent to this.
To know more about energy:
https://brainly.com/question/14637536
#SPJ4
what is the change in the potential energy of the rolling solid cylinder if the vertical height difference between the starting position of the center of mass (at rest) of the solid cylinder and the ending position of the center of mass of the solid cylinder is h?
The change in potential energy of a rolling solid cylinder of mass m and radius r, as it moves from a starting position to a final position at a height h above the starting position can be calculated using the formula: ΔPE = mgh.
Where ΔPE is the change in potential energy, g is the acceleration due to gravity (9.8 m/s^2), and h is the height difference.
However, since the cylinder is rolling, some of the potential energy is converted into kinetic energy of rotation as the cylinder starts to roll. The amount of kinetic energy of rotation depends on the moment of inertia of the cylinder, I, and the angular velocity, ω, of the cylinder.
Therefore, the total change in energy can be written as:
ΔE = ΔPE + ΔKE
= mgh + 0.5 I ω^2
where ΔKE is the change in kinetic energy due to rotation.
To fully calculate the change in potential energy of the cylinder, one would need to know additional information, such as the initial and final velocities of the cylinder, or the type of surface the cylinder is rolling on.
To learn more about potential energy
https://brainly.com/question/24284560
#SPJ4
an electron and proton are accelerated through the same potential difference. a) the electron has the greater k. b) the proton has the greater k. c) the electron has the greater speed. d) the proton has the greater speed
Since the proton has a greater mass than the electron, it will have a greater kinetic energy. Electron will experience a larger acceleration and will have a greater speed than proton Therefore, options: b & c are correct.
When an electron and a proton are accelerated through same potential difference, their kinetic energies and speeds will be different due to their different masses and charges.
k = (1/2)mv^2
Since the potential difference is the same, the work done on each particle will be the same. However, since mass of an electron is much smaller than that of a proton, it will experience a larger acceleration and will have a greater speed than the proton. Therefore, option (c) &(b) are correct.
To know more about kinetic energy, here
brainly.com/question/15764612
#SPJ4
when kayla stands on her trampoline, it sags by 0.20 m . now she starts bouncing. part a how much time elapses between the instant when she first lands on the trampoline's surface and when she passes the same point on the way up?
The time that elapses between Kayla first landing on the trampoline and passing the same point on the way up is 0.28 seconds.
To find this, we can use the equation for free fall: y = 0.5 * g * t^2, where y is the displacement, g is the acceleration due to gravity (9.81 m/s^2), and t is the time elapsed.
First, rearrange the equation to solve for t: t = sqrt(2 * y / g). Now, plug in the displacement (0.20 m) and the acceleration due to gravity (9.81 m/s^2): t = sqrt(2 * 0.20 / 9.81) ≈ 0.20 seconds.
Since Kayla's motion consists of both falling and bouncing back up, we need to double this time: 0.20 * 2 = 0.40 seconds.
To know more about gravity click on below link:
https://brainly.com/question/14874038#
#SPJ11
if our estimates of the number of comets in every part of the solar system are correct, the total mass contained in comets must be:
To find the total mass contained in comets in the entire solar system, simply add up the masses calculated in step 3 for each region.
If our estimates of the number of Comets in every part of the solar system are correct, the total mass contained in comets can be calculated by following these steps:
1. Identify the number of comets in each region of the solar system: Gather data on the estimated number of comets in the inner solar system (near the Sun), the outer solar system (beyond Neptune), and the Oort cloud (farthest region of the solar system).
2. Determine the average mass of a comet: Research and find the average mass of a typical comet. Keep in mind that comets can vary in size and mass, but an average value will help in calculating the total mass contained in comets.
3. Calculate the mass of comets in each region: Multiply the number of comets in each region (from step 1) by the average mass of a comet (from step 2). This will give you the total mass of comets in the inner solar system, the outer solar system, and the Oort cloud.
4. Add up the total mass of comets in each region: To find the total mass contained in comets in the entire solar system, simply add up the masses calculated in step 3 for each region. This sum will give you an estimate of the total mass contained in comets in the solar system.
To Learn More About Masses
https://brainly.com/question/29077312
#SPJ11