the public members of a class must be declared before the private members. group of answer choices true false

Calix was asked to protect a system from a potential attack on DNS. To do this, the locations he would need to protect are b. host table and external DNS server.

This is because host table and external DNS servers are the most vulnerable locations to be attacked. DNS is an abbreviation for the Domain Name System. It is the internet's telephone book, linking web servers with their corresponding domain names. A typical DNS server can manage a phonebook of millions of domain names and their associated IP addresses. It translates human-friendly domain names into the IP addresses that machines use to recognize one another on the internet.

A host table is a simple text file that contains the IP address and domain names of every device on the network that has a fixed IP address. When a device connects to a network, the operating system stores the IP address and the domain name in a host table. Whenever the device requires data from another device on the network, it first checks the host table for the domain name and IP address of the device with which it wishes to connect. Therefore, option B is Correct.

Know more about IP address here :

https://brainly.com/question/29575722

#SPJ11

The cell c6 with the value 1.2546 will display as "125.5%" if it is formatted with percent style and one decimal place.

To format the cell, right-click on cell c6, then select "Format Cells" from the drop-down menu. In the "Format Cells" window, select the "Number" tab, then select "Percentage" from the list of formats. Now you can adjust the number of decimal places, by changing the value in the box next to "Decimal places". To change the value to one decimal place, set the value to "1".

Once you have set the number of decimal places, click on the "OK" button to apply the formatting. The value in cell c6 will now be displayed as "125.5%" when viewed in the worksheet.

You can learn more about formatting at: brainly.com/question/21934838

#SPJ11

When a router's interface is configured to connect with a switch trunk port to route packets between VLANs, it is known as Router-on-a-Stick (RoS).

Router-on-a-Stick (RoS) is a configuration technique for Cisco networks that allows a single physical interface of a router to support multiple sub-interfaces.

This feature aids in the configuration of VLANs and inter-VLAN routing. It allows you to deploy a single physical interface on a router to separate your network into many sub-networks or VLANs. In other words, Router-on-a-Stick (RoS) is a method for routing traffic between VLANs using only one physical interface on a router.

In most cases, the trunk interface is connected to a switch that is configured to support multiple VLANs. Because the router has just one physical interface, it must use sub-interfaces to operate with each VLAN separately.

Learn more about router here:

https://brainly.com/question/30356109

#SPJ11

The correct answer is If my coworker is creating headings for a report, I would advise them to keep the headings short but clear, and to use a consistent format for all the headings. Using parallel construction is not as important as clarity and consistency in this case.

To ensure clarity, it is important to use headings that accurately reflect the content of the section and are easy to understand. Headings should also be brief and to the point, to avoid confusing or overwhelming the reader. In terms of format, I would recommend using a consistent heading hierarchy, such as the APA style or MLA style, where different levels of headings are formatted differently. This will help to organize the content and make it easier for the reader to navigate the report. Additionally, I would advise my coworker to consider using bullet points or numbered lists within sections to help break up long blocks of text and make the report more readable. This can also help to highlight key points and make them more memorable for the reader. By following these recommendations, my coworker can create clear and well-organized headings that effectively guide the reader through the report and make the content more accessible and engaging.

To learn more about coworker click on the link below:

brainly.com/question/30038316

#SPJ1

The static route that an IT technician would enter to create a backup route to the 172.16.1.0 network that is only used if

the primary RIP learned route fails is as follows:ip route 172.16.1.0 255.255.255.0 192.168.10.2 10.What is a static route?A static route is a route that is manually added to a router's routing table rather than one that is discovered dynamically via routing protocols. The purpose of a static route is to offer a more secure and stable way to route data through a network. It is also possible to use static routes to fine-tune the path that data takes through a network.Static routes are commonly used to connect separate networks that do not have their own routing protocol, or to offer backup connectivity if a primary route is unavailable. In the case of a failed primary route, a backup route may be used to keep network traffic flowing properly.
An IT technician would enter the following static route to create a backup route to the 172.16.1.0 network that is only used if the primary RIP learned route fails:

ip route 172.16.1.0 255.255.255.0 [next-hop IP address] [administrative distance]

Replace [next-hop IP address] with the IP address of the next-hop router and [administrative distance] with a value higher than RIP's default (120) to ensure it's used as a backup route.

Learn more about primary RIP here;

https://brainly.com/question/30902592

#SPJ11

Creating a backup route to the 172.16.1.0 network involves setting a static route with an Administrative Distance (AD) higher than 120, which is the AD used for RIP. Configure this on the router's global configuration mode.

To create a backup static route on a router, an IT professional would use a higher Administrative Distance (AD) value than the primary RIP learned route. The AD value used for RIP is 120, so the static route should have an AD greater than 120. Here is an example on how to set it up:

  Step 3: Exit the configuration mode and save the changes.

With this setup, this static route will only be used if the primary RIP learned route fails.

https://brainly.com/question/33558761

Sydney Pollack studied and taught acting and was a Broadway Actor before directing Plays.

Sydney Pollack was an American filmmaker, actor, and producer known for his versatile work in film and television. He directed and produced numerous critically acclaimed films, including Out of Africa, Tootsie, The Way We Were, and Three Days of the Condor.

Pollack was a prominent figure in the entertainment industry and was widely respected for his creative vision, leadership skills, and ability to work with actors. He won numerous awards throughout his career, including two Academy Awards, and his legacy continues to influence modern cinema. Pollac

Learn more about Broadway Actors on:

https://brainly.com/question/13962991

#SPJ1

Answer:
Your login to your college student account

Explanation:

login information you use to login to register for classes or your school email

The company could have better responded to the breach by notifying customers of the breach sooner and implementing a more effective data breach response plan.

The key points of the POS case study: Home Depot are:

1. The Home Depot data breach occurred between April and September 2014. Cybercriminals broke into the company's self-checkout terminals' computer systems and stole credit and debit card details. A simple phishing email was used to hack into the company's networks, where a combination of custom-built and off-the-shelf malware was deployed to infiltrate the self-checkout POS systems.

2. The cyber attack on Home Depot is thought to have resulted in the theft of over 56 million credit and debit card records, making it one of the most significant retail data breaches ever.

3. Home Depot could have avoided the data breach by being more vigilant about cyber attacks and creating a culture of awareness within their organization. They could also have improved their security by investing in better technology, such as EMV chip technology, which has been shown to be more secure.

Learn more about cyber attacks visit:

https://brainly.com/question/29997377

#SPJ11

The given statement "Wolfram Alpha is an example of a search tool that can help you solve factual questions to help complete your homework." is true because Wolfram Alpha is a search engine that can help with solving factual questions and completing homework assignments.

Wolfram Alpha differs from other search engines in that it focuses on computational knowledge rather than providing a list of web pages. Wolfram Alpha can provide answers to questions in various fields, including mathematics, science, engineering, finance, and many others. Students can use it to find solutions to mathematical equations, plot graphs, get definitions of technical terms, and much more.

You can learn more about Wolfram Alpha at

https://brainly.com/question/30401224

#SPJ11

The output of the public class Student is the value stored in the private variables mygpa and my credits. The public void increase credits (int amount) method will increase the value of my credits by the amount specified.

This increase is permanent and is not reversed until the program is terminated. The code shows a simple example of data abstraction, which is a technique used in software engineering to hide certain parts of a program from users. By declaring the variables as private, the user is not able to directly access them and can only change their values through the public void increase credits (int amount) method.

Data abstraction allows for the separation of code logic from the user interface and can be used to protect data from malicious or accidental modification, making programs more secure.

You can learn more about data abstraction at: brainly.com/question/30626835

#SPJ11

(A) checkIndexes(table, 4, 5) returns a value of true as it is within the bounds of the 2-dimensional array, data, which is declared as double[][].

The method call that returns a value of each answer are

Therefore, the method call that returns a value of true is `checkIndexes(table, 4, 5).

Learn more about boolean logic here

https://brainly.com/question/2467366

#SPJ11

The given program takes input values from the user and performs several operations on a 4x4 array "a".

Here are the operations performed by the program step-by-step:

Initialize a variable "d" to 0.

Take input values for the 4x4 array "a" using nested for loops.

For each element in the array, check if dividing the element by 1 gives a non-integer result. If yes, replace the element with 1, else replace it with the integer value of the quotient of the element divided by 1.

For each element in the array, check if it is greater than 99. If yes, replace it with the remainder when divided by 100. Then replace the element with the remainder when divided by 3.

Add the diagonal elements and anti-diagonal elements of the array to the variable "d".

Learn more about program on

https://brainly.com/question/26134656

#SPJ1

To define a function named SortVector that takes a vector of integers as a parameter and sorts it in descending order (highest to lowest), you can use the bubble sort algorithm.

Here's a step-by-step explanation and code in C++:

1. Define the SortVector function:

```cpp
void SortVector(vector& myVec) {
   int n = myVec.size();
   for (int i = 0; i < n-1; i++) {
       for (int j = 0; j < n-i-1; j++) {
           if (myVec[j] < myVec[j+1]) {
               swap(myVec[j], myVec[j+1]);
           }
       }
   }
}
```

2. Write the main program:

```cpp
#include
#include
using namespace std;

void SortVector(vector& myVec);

int main() {
   int n, num;
   cin >> n;

   vector myVec;
   for (int i = 0; i < n; i++) {
       cin >> num;
       myVec.push_back(num);
   }

   SortVector(myVec);

   for (int i = 0; i < n; i++) {
       cout << myVec[i] << ",";
   }

   return 0;
}
```

With this code, if the input is: 5​ 10​ 4​ 39​ 12​ 2​,

the output is : 39,12,10,4,2, as the function SortVector modifies the vector by sorting the elements in descending order (highest to lowest) using the bubble sort algorithm.

To know more about bubble sort:https://brainly.com/question/13161938

#SPJ11

The command `ip dhcp excluded-address 10.0.15.1 10.0.15.15` issued by a network technician on a Cisco router will exclude IP addresses between 10.0.15.1 to 10.0.15.15. This means that the IP addresses within this range will not be assigned to clients on the network via DHCP.

Explanation

Dynamic Host Configuration Protocol (DHCP) allows network administrators to automatically assign IP addresses to clients on a network. The IP addresses assigned via DHCP are selected from a range of addresses specified by the network administrator.

DHCP servers allow a range of IP addresses to be assigned to clients. The `ip dhcp excluded-address` command can be used to exclude certain IP addresses within a range from being assigned to clients via DHCP. The command `ip dhcp excluded-address 10.0.15.1 10.0.15.15` issued by a network technician on a Cisco router will exclude IP addresses between 10.0.15.1 to 10.0.15.15. This means that the IP addresses within this range will not be assigned to clients on the network via DHCP.

To learn more about "network technician", visit: https://brainly.com/question/13940870

#SPJ11

Each column in a relation represents an attribute.

This is because, in computer science, a relation refers to a table that consists of a specific number of columns and rows. This is used in relational databases to keep data organized in tables. In a relation, each row represents a single record, while each column represents a specific attribute.

Relations have various properties, including atomic values, attribute domains, and no duplicate rows. Each row in a relation is uniquely identifiable through the primary key, which is a column or a set of columns that uniquely identify each row in a relation. The primary key is used to enforce entity integrity.

Learn more about relational database here:

brainly.com/question/13262352

#SPJ11

The two scheduling algorithms which could potentially result in starvation are First Come First Served (FCFS) and Priority.
First Come First Served (FCFS) is a scheduling algorithm where processes are scheduled according to their arrival time; the process that arrives first is given the highest priority and is processed first. In this algorithm, if the process that is scheduled first takes a long time, then all other processes have to wait and could potentially result in the starvation of other processes.
Priority is a scheduling algorithm where the processes are given priority based on some factors such as the priority of the process, the type of process, etc. In this algorithm, if a higher priority process arrives, it will take precedence over a lower priority process and the lower priority process may end up starving.
Thus, First Come First Served and Priority are the two scheduling algorithms that could potentially result in starvation.

Learn more about  scheduling algorithms:https://brainly.com/question/26639214

#SPJ11

To provide multiple paths between switches, you can implement a technique called link aggregation or port aggregation, also known as EtherChannel or NIC teaming.

Link aggregation groups multiple physical links into a single logical link, providing redundancy and increased bandwidth.

There are two types of link aggregation:

To implement link aggregation, you need to ensure that the switches and the network interface cards (NICs) support the technique. You also need to configure the switches and the NICs to use the same link aggregation method. Once configured, the switches will recognize the link aggregation and automatically load balance traffic across the links.

By providing multiple paths between switches, you can ensure that if one link goes down, an alternate path is available, and the network continues to function without interruption.

To get a similar answer on Link aggregation:

https://brainly.com/question/6964275

#SPJ11

The following conditions are the result of a syn (synchronize) flood attack: Denial of service (DoS), Packet filtering, and Resource exhaustion.

A flood attack is a type of cyberattack that aims to incapacitate a network or web server by overwhelming it with a large volume of traffic. It is one of the most common types of cyberattacks, and it is commonly used to execute Denial of Service (DoS) assaults on target systems, resulting in resource exhaustion and eventual failure.

The attacker directs a large number of SYN packets to the target in an SYN flood attack. The aim of these attacks is to clog up a network or server's processing capacity by forcing it to synchronize with a high volume of requests. This effectively renders the target system unavailable, causing the user to experience resource exhaustion and eventual failure. The condition of packet filtering is also the result of a syn flood attack.

Learn more about SYN flood attacks:

https://brainly.com/question/28279445

#SPJ11

A program allows the user to enter one or more numbers. The first input instruction will get the first number only and is referred to as the Priming read.

In computing, priming typically refers to a process of initializing or preparing a system or component for use. This can involve various tasks such as loading data into memory, setting up data structures or objects, and configuring settings or parameters.

Therefore, Priming is often used in the context of caching and prefetching, which are techniques used to improve performance by anticipating future data or operations and loading them into memory or cache before they are needed. For example, a web browser may prime a cache by loading frequently accessed web pages or resources into memory, so that they can be quickly retrieved when the user requests them.

Learn more about Priming from

https://brainly.com/question/30403295

#SPJ1

See full question below

A program allows the user to enter one or more numbers. The first input instruction will get the first number only and is referred to as the _____________________ read.

The point in a telephone network where the maintenance responsibility passes from a telephone company to the subscriber is called the demarcation point.

The demarcation point is a physical point in a telephone network where the maintenance responsibility for telephone equipment changes hands from the phone company to the subscriber. It is also known as the network interface device (NID), the network interface unit (NIU), or the intelligent network interface device (INID).

The demarcation point serves as a boundary between the phone company's equipment and wiring and the customer's equipment and wiring. The phone company is responsible for any problems that occur on its side of the demarcation point, while the customer is responsible for any problems that occur on its side of the demarcation point.

The demarcation point can be found inside or outside of the customer's building depending on the type of service provided.

You can learn more about demarcation points at: brainly.com/question/30247336

#SPJ11

Below is how you can write a Python program that uses two functions to calculate the average award money for gold medalists:

python

def calculate_award_money(num_medals, total_sponsorship):

   # Each gold medalist receives $37,500 in prize money

   prize_money = 37500 * num_medals

   # Calculate the total award money received

   total_award_money = prize_money + total_sponsorship

   return total_award_money

def calculate_average_award_money(total_award_money, num_medals):

   # Calculate the average award money per gold medal

   average_award_money = total_award_money / num_medals

   return average_award_money

# Get user inputs

num_medals = int(input("Enter Gold Medals Won: "))

total_sponsorship = int(input("How many dollars were you sponsored in total?: "))

# Calculate total award money

total_award_money = calculate_award_money(num_medals, total_sponsorship)

# Calculate average award money

average_award_money = calculate_average_award_money(total_award_money, num_medals)

# Output the results

print("Your prize money is:", total_award_money)

print("Your average award money per gold medal was:", average_award_money)

The first function, calculate_award_money, takes two parameters: num_medals (the number of gold medals won) and total_sponsorship (the total amount of sponsorship received). It calculates the total amount of award money received by multiplying the number of gold medals by the prize money for each medal ($37,500) and adding the total sponsorship. It then returns this value.

Therefore, the second function, calculate_average_award_money, takes two parameters: total_award_money (the total amount of award money received) and num_medals (the number of gold medals won). It calculates the average award money per gold medal by dividing the total award money by the number of gold medals. It then returns this value.

Learn more about python from

https://brainly.com/question/26497128

#SPJ1

The correct option for an empty singly linked chain is "the reference to the first node is null." Therefore the correct option is option B.

A singly linked list, also known as a one-way linked list, is a type of linked list. It is a group of nodes that are linked to one another in a linear order. Each node has a data component and a pointer component pointing to the next node in the sequence.

When we speak of an empty singly linked chain, it is a chain that has no nodes. Therefore, the reference to the first node is null because there are no nodes to reference. So, "the reference to the first node is null" is the correct answer among the given options for an empty singly linked chain. Therefore the correct option is option B.

For such more question on node:

https://brainly.com/question/29526707

#SPJ11

Which of the following is true about an empty singly linked chain? group of answer choices

the data value of the first node is null

the reference to the first node is null

the first next reference is null the number of items in the chain is 0

The most commonly used LAN for fiber transmission links is the 850 nm multimode fiber.

This type of fiber is designed to carry multiple signals over the same link, allowing for faster data transmission and greater bandwidth. It can be used for short-distance transmission over up to a few kilometers. It is a relatively low-cost solution and requires less power than single-mode fiber. The 850 nm multimode fiber uses a relatively wide light source, which is able to spread the signal over a greater distance with less attenuation. This makes it a great choice for short-distance applications.

Additionally, it is more immune to noise than single-mode fiber and is less susceptible to changes in temperature. It is an ideal choice for fiber-optic networks that are used in LANs, such as those used for Ethernet, data centers, and storage area networks.

You can learn more about multimode fiber at: brainly.com/question/20459294

#SPJ11

Option (B) for (int k = 1; k < arr.length; k++) if (arr[k] % 2 != 0) System.out.printIn(arr[k]); will correctly print all of the odd integers contained in arr but none of the even integers contained in arr.

Let's dive deeper into the details below.

An array is a group of variables that share a name and a data type. It's a method to store and access data in Java. We can access the elements of an array using its index, which starts at 0, and we can modify them when required. In Java, arrays can hold a fixed number of values of the same data type. The array is declared using the following syntax:

dataType[] arrayName = new data Type[size]; In this code, the size is the number of elements in the array.

arr is an array of integers.

Even integers are integers that are divisible by 2 with no remainder.

Integers that are not divisible by 2 with no remainder are known as odd integers. In other words, odd integers are numbers that cannot be divided equally by 2.

Learn more about data type.

brainly.com/question/844140

#SPJ11

The sum of 4 and 6 is 10. You can find the answer by adding 4 and 6 together:

4 + 6 = 10.

In programming, you can perform arithmetic operations such as addition, subtraction, multiplication, and division using the appropriate mathematical operator.

To solve the problem in 2.19.5 simple math, you can use the addition operator (+) to find the sum of 4 and 6. Here's the code to accomplish this:

sum = 4 + 6

print("The sum of 4 and 6 is:", sum)

This will output: The sum of 4 and 6 is: 10

You can assign the result of the addition operation to a variable called sum, and then use the print() function to output the result in a readable format.

Learn more about 4 and 6 here:

brainly.com/question/9436441

#SPJ1

Answer:

true

Explanation:

The given statement "If you have information literacy, you can select the right tool to find the information you need" is true Information literacy is the ability to locate, evaluate, and effectively use information from various sources.

This includes knowing which tools and resources to use to find the information needed. With information literacy, individuals can identify and select the appropriate search tools and strategies to find information that is reliable, relevant, and accurate. This includes understanding how to use search engines, databases, online catalogs, and other resources effectively. Information literacy is a critical skill in today's digital age, where vast amounts of information are readily available, and it is essential to know how to sift through this information to find what is useful and reliable.

You can learn more about  information literacy at

https://brainly.com/question/28528603

#SPJ11

Yes, that is correct. Encapsulation is the process of breaking a message or data into smaller packets or frames, adding control information such as source and destination addresses, error detection codes, and other necessary information, and transmitting the message through a transmission medium such as a wired or wireless network.

This process helps to ensure that the data is transmitted efficiently and reliably over the network.

Encapsulation is an essential process used in computer networking to transmit data over a network. When data is sent over a network, it is divided into small packets, which are then encapsulated with the necessary control information such as source and destination addresses, error detection codes, and other necessary information.

Each packet is given a sequence number so that the receiving device can reassemble the packets in the correct order. This process is essential for ensuring that the data is transmitted reliably and accurately over the network. Once the packets reach their destination, they are de-encapsulated to extract the original message or data.

You can read more about Encapsulation at https://brainly.com/question/28482558

#SPJ11

Machines used in manufacturing, such as computers, printers, vehicles, furniture and fixtures generally are classified as capital assets.

Explanation:

What are capital assets?

Capital assets are long-term assets used in business operations and can be classified as tangible or intangible assets. Computers, printers, vehicles, furniture, fixtures, and machines used in manufacturing are all examples of capital assets. Tangible assets are assets that can be touched, such as machines, vehicles, furniture, and fixtures. Tangible assets can be seen, touched, and felt. Intangible assets, on the other hand, cannot be touched. Copyrights, patents, and trademarks are examples of intangible assets. Most businesses classify their assets as either fixed or current, but the Financial Accounting Standards Board (FASB) does not require companies to do so.

Capital assets are long-term assets used in business operations and can be classified as tangible or intangible assets. Computers, printers, vehicles, furniture, fixtures, and machines used in manufacturing are all examples of capital assets.

Learn more about intangible assets here:

https://brainly.com/question/13541651

#SPJ11

The answer is "I, II, and III". In this question we calculating the  volume of a cylinder, that's formula is: volume  = π × r² × h.

Volume is a measure of three-dimensional space. It is frequently expressed numerically using SI-derived units, as well as different imperial or US-standard units. Volume and the notion of length are connected.

In the example above, the user inputs "r and h" and we utilise the function, whose value is 3.14 or 22/7. All of the options were correct when it came to calculating the volume, which can be explained as follows:

To learn more about volume, refer to:

https://brainly.com/question/1972490

The setup described represents a layered security approach that includes both preventive and detective controls, which is a common approach to securing IT infrastructure.

The firewall, IDS (Intrusion Detection System), and HIPS (Host Intrusion Prevention System) are examples of preventive controls. These are designed to prevent security incidents by blocking unauthorized access and detecting and stopping attacks before they can cause damage.

The scheduled penetration testing is an example of a detective control. Penetration testing is a method of testing the security of a system by attempting to exploit vulnerabilities in a controlled environment.

Therefore, the installation of HVAC in the server room is an example of a physical security control. This control is designed to protect the physical infrastructure from environmental threats such as overheating, humidity, and dust.

Read more about firewall here:

https://brainly.com/question/13693641

#SPJ1