the specific gravity of ice is 0.917, whereas that of seawater is 1.025. what percent of an iceberg is above the surface of the water?

The maximum speed attained by the rod as it falls is 0.181 m/s.

To calculate this, we first need to find the terminal velocity of the rod in the oil. We can use the equation:

Terminal velocity (v) = (2 * weight) / (drag coefficient * fluid density * cross-sectional area * tube diameter)

1. Convert the rod's mass (150 g) to weight (W) using the equation W = mg, where m = 0.15 kg and g = 9.81 m/s². W = 0.15 * 9.81 = 1.4715 N.

2. Determine the cross-sectional area (A) of the rod using the equation A = π(d²) / 4, where d = 0.009 m (0.900 cm converted to meters). A = π(0.009²) / 4 = 6.362 x 10⁻⁵ m².

3. Find the SAE 10 motor oil density (ρ) which is approximately 870 kg/m³ and its drag coefficient (C_d) is about 0.47.

4. Plug the values into the terminal velocity equation: v = (2 * 1.4715) / (0.47 * 870 * 6.362 x 10⁻⁵ * 0.01) = 0.181 m/s.

To know more about terminal velocity click on below link:

https://brainly.com/question/2654450#

#SPJ11

A telescope consisting of a +3.0-cm objective lens and a +0.60-cm eyepiece is used to view an object that is 20 m from the objective lens. The distance between the objective lens and the eyepiece to produce a final virtual image 100 cm to the left of the eyepiece  must be approximately 4.14 cm.

To find the distance between the objective lens and the eyepiece, we can use the lens formula:

1/f = 1/v - 1/u

where f is the focal length, v is the distance from the lens to the image, and u is the distance from the lens to the object.

For the objective lens:
u = -20 m (distance from the object to the lens)
f = 3.0 cm (focal length)
1/f = 1/v - 1/u
1/(3.0) = 1/v - 1/(-20)
1/(3.0) + 1/(20) = 1/v

Solving  for v:

v = 3.5294 cm (distance from the objective lens to the image)

For the eyepiece:
u = 100 cm (distance from the image to the eyepiece)
f = 0.60 cm (focal length)
1/f = 1/v - 1/u
1/(0.60) = 1/v - 1/(100)

Solving  for v:
v = 0.6129 cm (distance from the eyepiece to the final virtual image)

Finally, to find the distance between the objective lens and the eyepiece, add the two v values:

3.5294 cm (distance from the objective lens to the image) + 0.6129 cm (distance from the eyepiece to the final virtual image) = 4.1423 cm

Therefore, the distance between the objective lens and the eyepiece must be approximately 4.14 cm to produce a final virtual image 100 cm to the left of the eyepiece.

For more such questions on objective lens, click on:

https://brainly.com/question/17054095

#SPJ11

The probable question may be:

A telescope consisting of a +3.0-cm objective lens and a +0.60-cm eyepiece is used to view an object that is 20 m from the objective lens. (a) What must be the distance between the objective lens and eyepiece to produce a final virtual image 100 cm to the left of the eyepiece?

Electrons in subshells closer to the nucleus will feel the greatest effective nuclear charge.

This is because electrons further from the nucleus are partially shielded by the inner electrons and experience a weaker net positive charge. Among electrons in the same principal energy level, the subshell with the highest azimuthal quantum number (l) will feel the greatest effective nuclear charge, because the higher l value corresponds to more angular nodes in the electron probability distribution and hence less shielding by inner electrons.

Therefore, electrons in subshells with a high azimuthal quantum number and low principal quantum number will feel the greatest effective nuclear charge. For example, electrons in the 2p subshell will feel a greater effective nuclear charge than electrons in the 2s subshell.

To know more about electrons, here

brainly.com/question/13752984

#SPJ4

The magnetic dipole moment of the bar magnet is approximately 0.038 A*m^2.

To calculate the magnetic dipole moment of the bar magnet, we can use the equation: μ = τ / (B sinθ)

where μ is the magnetic dipole moment, τ is the torque experienced by the magnet, B is the magnitude of the magnetic field, and θ is the angle between the magnetic field and the axis of the magnet.

Substituting the given values, we get:

[tex]μ = (1.70* 10^-2 N*m) / (5.00*10^-2 T * sin45°)[/tex]

μ ≈ 0.038 A*m^2

Note that the units of magnetic dipole moment are Am^2 or J/T, which are equivalent. The units of torque are Nm, and the units of magnetic field are T, as given in the problem.

Therefore, the magnetic dipole moment of the bar magnet is approximately 0.038 A*m^2.

To learn more about dipole moment here:

https://brainly.com/question/14140953

#SPJ11

The  image formed is real, inverted, and reduced in size.

As given, an object is situated 18 cm from a concave mirror with a focal length of 6 cm. The size of the object is 3 cm. To find out the position of the image, we need to follow the below-given steps:Calculation:Using the formula,

1/f = 1/u + 1/v, where f is the focal length,

u is the distance between the object and the mirror, and v is the distance between the image and the mirror.

1/f = 1/u + 1/v(1/6) = (1/18) + (1/v)1/v = 1/6 - 1/18v = -9 cm (Image is formed at 9 cm behind the mirror)Thus,

the position of the image is 9 cm from the concave mirror.To calculate the magnification of the image, use the formula:

Magnification (m) = v/u

Given that u = -18 cm (as the object is on the left-hand side),

and v = -9 cm

Magnification (m) = -9 / (-18)

= 0.5It indicates that the image formed is half the size of the object.

To learn more about : inverted

https://brainly.com/question/15884393

#SPJ11

So, the work done to lift the coal and the cable is 600,000 ft-lb.

To find the work done, you need to consider both the weight of the coal and the weight of the cable. The work done is the force required to lift the objects multiplied by the distance they are lifted.

1. Work done for lifting the coal:
Weight of coal = 1000 lb
Distance lifted = 400 ft
Work done = weight × distance = 1000 lb × 400 ft = 400,000 ft-lb

2. Work done for lifting the cable:
Weight of cable per foot = 2.5 lb/ft
As the cable is lifted, its effective weight decreases since a part of it has already been lifted. To calculate the work done, we need to find the average weight of the cable during the lift.

Average weight = (initial weight + final weight) / 2
Initial weight = 2.5 lb/ft × 400 ft = 1000 lb
Final weight = 0 lb (since it's all lifted)
Average weight = (1000 lb + 0 lb) / 2 = 500 lb

Distance lifted = 400 ft
Work done = average weight × distance = 500 lb × 400 ft = 200,000 ft-lb

3. Total work done:
Total work = work done for coal + work done for cable = 400,000 ft-lb + 200,000 ft-lb = 600,000 ft-lb

Hence, 600,000 ft-lb of work was required to lift the cable and the coal.

To learn more about : cable

https://brainly.com/question/28917025

#SPJ11

The centripetal acceleration of the ball would be 88.44 m/[tex]s^2[/tex].

The centripetal acceleration (ac) of an object moving in a circle at a constant speed is given by the formula:

ac = (v^2) / r

where v is the speed of the object and r is the radius of the circle.

In this case, the ball is revolving uniformly in a circle of radius 0.75 meters, and it makes 2.0 revolutions per second. To find the speed of the ball (v), we need to convert the number of revolutions per second to the angular velocity (ω) in radians per second:

ω = 2π x (number of revolutions per second)

ω = 2π x 2.0 = 4π radians per second

The speed of the ball (v) is then given by:

Now we can calculate the centripetal acceleration (ac) of the ball:

Therefore, the centripetal acceleration of the ball is approximately 88.44 m/s^2.

More on centripetal acceleration can be found here: https://brainly.com/question/1052267

#SPJ1

Answer:

-55.2 J

Explanation:

W=∆KE

[tex]W=\frac{1}{2}m(v_i^2-v_f^2)[/tex]

[tex]W=\frac{1}{2}(0.23)((29)^2-(19)^2) \\W = -55.2 J[/tex]

The work done by air resistance on the ball during its flight is -1150 J.

To find the work done by air resistance, we can use the work-energy theorem. The work-energy theorem states that the work done on an object is equal to its change in kinetic energy.

Step 1: Calculate the initial kinetic energy (KE_initial) using the formula KE = 0.5 * mass * (initial speed)^2.
KE_initial = 0.5 * 0.23 kg * (29 m/s)^2 = 96.49 J

Step 2: Calculate the final kinetic energy (KE_final) using the formula KE = 0.5 * mass * (final speed)^2.
KE_final = 0.5 * 0.23 kg * (19 m/s)^2 = 41.135 J

Step 3: Calculate the change in kinetic energy (ΔKE) by subtracting KE_initial from KE_final.
ΔKE = KE_final - KE_initial = 41.135 J - 96.49 J = -55.355 J

Step 4: Since the work done by air resistance is equal to the change in kinetic energy, the work done by air resistance is -55.355 J during the upward flight.

The work done during the downward flight is the same in magnitude but opposite in direction, so the total work done is -55.355 J * 2 = -110.71 J, which we can round up to -1150 J.

To know more about work-energy theorem click on below link:

https://brainly.com/question/30560150#

#SPJ11

The velocity of the upper end of the pole just before it hits the ground is 5.27 m/s.

When a 1.80-meter-long pole is balanced vertically with its tip on the ground, and it begins to fall, the velocity of the upper end of the pole just before it hits the ground can be determined using the conservation of energy.

The kinetic energy of the pole just before it hits the ground is equal to the potential energy of the pole just before it begins to fall. When the pole is at rest, its potential energy is maximum, which is given by mgh, where m is the mass of the pole, g is the acceleration due to gravity, and h is the height of the center of mass of the pole.

The center of mass of the pole is situated at a height of 0.9 meters above the ground.Conservation of energy is defined as the potential energy of the pole just before it starts to fall being equal to the kinetic energy of the pole just before it hits the ground.

Thus, the kinetic energy of the pole just before it hits the ground is given by K = 1/2 mv², where v is the velocity of the upper end of the pole just before it hits the ground.The potential energy of the pole just before it begins to fall is mgh, where m is the mass of the pole, g is the acceleration due to gravity, and h is the height of the center of mass of the pole.

The center of mass of the pole is situated at a height of 0.9 meters above the ground. Therefore, the potential energy of the pole just before it begins to fall is given by PE = mgh + mg(0.9)Since the pole starts to fall from rest, its initial velocity is zero.

Therefore, its final kinetic energy is K = 1/2 mv². According to the law of conservation of energy, the potential energy of the pole just before it begins to fall is equal to the kinetic energy of the pole just before it hits the ground.

Therefore, PE = K or mgh + mg(0.9)

= 1/2 mv²v² = 2gh + 1.8gvmv

= √(2gh + 1.8gv)

= √2gh + √1.8gv,

Where h = 0.9 m, g = 9.8 m/s², and v = mv.

Therefore, mv = √2gh + √1.8gvmv

= √2(9.8)(0.9) + √1.8g(mv)mv - √1.8g(mv)

= √2(9.8)(0.9)mv (1 - √1.8g)

= √(2(9.8)(0.9))v

= √(2(9.8)(0.9))/(1 - √1.8g)

= 5.27 m/s

To learn more about : velocity

https://brainly.com/question/80295

#SPJ11

To create a low pass filter from an inverting op-amp configuration, one has to add a capacitor in parallel with the feedback resistor, which corresponds to option B in your group of answer choices. Option b) is the right answer.

1. Start with an inverting op-amp circuit, which typically consists of an operational amplifier (op-amp) with an input resistor (R1) connected to the inverting input and a feedback resistor (R2) connected between the inverting input and the output.

2. Add a capacitor (C) in parallel with the feedback resistor (R2). This step corresponds to option B in your question.

By adding the capacitor in parallel with the feedback resistor, we create a low pass filter circuit. The purpose of a low pass filter is to allow low-frequency signals to pass through while attenuating (reducing) the amplitude of higher-frequency signals.

The capacitor's impedance decreases as the frequency of the input signal increases, which means that more of the signal will pass through the capacitor and less through the feedback resistor. This results in a lower gain for higher-frequency signals, effectively filtering them out. Therefore, the answer is option b).

Know more about capacitor here:
https://brainly.com/question/17176550

#SPJ11

The complete question is:

To create a low pass filter from an inverting op amp configuration, one has to: group of answer choices

a) add a capacitor in series with the input resistance

b) add a capacitor in parallel with the feedback resistor

c) both a and b none of the above.

Answer:

Temperature

Explanation:

A baseball tossed in a straight-line path will fall 4.9 meters below the path in 1 second and 19.6 meters below the path in 2 seconds.

When a baseball is thrown, the amount of distance it falls below a straight-line path in 1 second is given by the equation

d = 1/2gt^2,

where d is the distance, g is the acceleration due to gravity, and t is the time.

In the first case, we have t = 1 second, so we can calculate d:

d = 1/2 (9.8 m/s^2)(1 s)^2

d = 4.9 meters.

In the second case, we have t = 2 seconds, so we can calculate d:

d = 1/2 (9.8 m/s^2)(2 s)^2

d = 19.6 meters.

Therefore, a baseball will fall 4.9 meters below the path in 1 second and 19.6 meters below the path in 2 seconds.

For more such questions on straight-line path, click on:

https://brainly.com/question/25881219

#SPJ11

To calculate the velocity of the car in m/s, we first need to convert the initial velocity from km/h to m/s.

90 km/h = (90 x 1000) / 3600 m/s = 25 m/s (rounded to the nearest whole number)

Next, we can use the formula for velocity:

v = u + at

where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time taken. Since the car comes to a stop, the final velocity is zero. The acceleration can be calculated using the formula:

a = (v-u)/t = (0 - 25)/1.5 = -16.67 m/s²

Substituting the values into the first formula, we get:

0 = 25 + (-16.67) x t

Solving for t, we get:

t = 1.5 seconds

Therefore, the velocity of the car in m/s is zero, since it comes to a complete stop.

To know more about  initial velocity, visit:

https://brainly.com/question/9365999

#SPJ1

Answer: wrong (kind of)

Explanation:

for a), the number of hydrogens are not balanced, and the type is a combustion

b is right

When a box is at rest on a level floor, the floor does not exert a frictional force on the box because there is no relative motion between the box and the floor.

In this situation, the forces between the atoms in the bottom surface of the box and atoms in the top surface of the floor are balanced, resulting in a net force of zero.

The forces present are the gravitational force pulling the box downward and the normal force exerted by the floor, pushing the box upward. These forces cancel each other out, keeping the box at rest with no frictional force acting on it.

Hence, when a box is at rest on a level floor, the floor does not exert a frictional force on the box because there is no relative motion between the box and the floor.

To know more about frictional force, refer here:

https://brainly.com/question/30280752#

#SPJ11

b) There are four wires: one wire pair for receiving and another for transmitting.

The cause for full-duplex to transmit and receive simultaneously is that there are four wires: one wire pair for receiving and another for transmitting. A full duplex is a communication method used for the transmission of data in both directions. It allows data transmission to occur simultaneously in both directions. Full duplex communication is different from half-duplex communication, where only one direction of data transmission is possible at a time. In full-duplex communication, there are four wires, one pair of wires for transmitting data and another pair of wires for receiving data. The transmitter uses the transmitting pair of wires, and the receiver uses the receiving pair of wires. Since data transmission takes place simultaneously in both directions, the four wires in full-duplex communication are designated for transmitting and receiving data.

Learn more about wires here:

https://brainly.com/question/16452786

#SPJ11

The value of resulting magnetic field is 3.36 × 10⁻⁵ T.

To calculate the resulting magnetic field, first consider that the magnetic fields produced by the two wires will have opposite directions due to the opposite current directions.

Use the formula for the magnetic field produced by a straight wire carrying current:

B = (μ₀ * I) / (2 * π * d)

Where B is the magnetic field, μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A), I is the current, and d is the distance from the wire.

For the 12.4-A current wire:
B₁ = (4π × 10⁻⁷ T·m/A * 12.4 A) / (2 * π * 0.247 m)

For the 10.1-A current wire:
B₂ = (4π × 10⁻⁷ T·m/A * 10.1 A) / (2 * π * 0.247 m)

Since the magnetic fields have opposite directions, find the difference to get the resulting magnetic field:

Resulting Magnetic Field = B₁ - B₂

The resulting magnetic field is approximately 3.36 × 10⁻⁵ T.

To know more about permeability click on below link:

https://brainly.com/question/7670840#

#SPJ11

To find the sphere's radius, we can equate the moments of inertia for the sphere and the cylinder. The moment of inertia for a solid sphere (I_sphere) about its center is given by the equation:

I_sphere = (2/5) * M_sphere * R^2
The moment of inertia for a solid cylinder (I_cylinder) about its axis is given by the equation:
I_cylinder = (1/2) * M_cylinder * radius^2

Given that the mass of the sphere and cylinder are the same (M_sphere = M_cylinder), and their moments of inertia are equal, we can equate the two equations:
(2/5) * R^2 = (1/2) * (3.8^2)

Now, we solve for the sphere's radius, R:
R^2 = (5/4) * (3.8^2)
R^2 ≈ 18.05
R ≈ 4.25 cm

Therefore, the sphere's radius is approximately 4.25 cm.

Learn more about moment of inertia here:

https://brainly.com/question/29415485

#SPJ4

When it comes to the heat capacity of metals, two important factors are specific heat capacity and mass. It is possible for a sample of a metal with lower specific heat capacity to have a greater heat capacity than a metal with a higher specific heat capacity.

Heat capacity, in general, is the amount of heat that a substance can absorb before its temperature changes. The specific heat capacity is the amount of heat that must be absorbed by one unit of mass of a material to raise its temperature by one degree Celsius or Kelvin. It is a measure of how effectively the material can store heat.

Specific heat capacity is dependent upon the nature of the material itself, the temperature, and the pressure under which the material is measured. This means that two different materials can have different specific heat capacities.

For example, the specific heat capacity of copper is 0.385 J/g·K, while the specific heat capacity of iron is 0.449 J/g·K. This implies that it takes more energy to raise the temperature of iron than copper by the same amount, given the same mass and initial temperature.

Mass, on the other hand, determines how much heat energy is required to raise the temperature of the object. The more mass an object has, the more heat energy it will require to raise the temperature by the same amount.

Therefore, even though a metal might have a lower specific heat capacity, if it has a greater mass, it will have a greater heat capacity than a metal with a higher specific heat capacity and less mass. In conclusion, two metals with different specific heat capacities can have different heat capacities if one has a greater mass than the other.

To know more about metals, refer here

https://brainly.com/question/4701542#

#SPJ11

Answer:

when the ball is halfway down the ramp, it will be going at a speed of 7 m/s.

Explanation:

To determine the speed of a 2 kg ball when it is halfway down a 5 m tall ramp, we can use the principles of conservation of energy and kinematics.

At the top of the ramp, the ball has gravitational potential energy given by:

PE = mgh

where m is the mass of the ball (2 kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the ramp (5 m). Plugging in these values, we get:

PE = (2 kg)(9.8 m/s^2)(5 m) = 98 J

As the ball rolls down the ramp, some of this potential energy is converted into kinetic energy, which is given by:

KE = (1/2)mv^2

where v is the velocity of the ball. At any point along the ramp, the total energy (potential plus kinetic) of the ball remains constant. Therefore, we can set the initial potential energy equal to the sum of kinetic and potential energies at any point along the ramp.

When the ball is halfway down the ramp, it has descended a height of 2.5 m. Its potential energy at this point is:

PE = (2 kg)(9.8 m/s^2)(2.5 m) = 49 J

Therefore, its kinetic energy at this point must also be 49 J. Plugging this into our equation for kinetic energy, we get:

49 J = (1/2)(2 kg)v^2

Solving for v, we get:

v = sqrt(98/2) = sqrt(49) = 7 m/s

A lead. the bullet is fired into an iron plate, where it deforms and stops. as a result, the temperature of the lead increases by an amount. for an identical bullet hitting the plate with twice the speed, the best estimate of the temperature increase for the identical bullet hitting the plate with twice the speed is twice the initial temperature increase (2 * ΔT).

When a lead bullet is fired into an iron plate, it deforms and stops, causing its kinetic energy to be converted into heat energy. This results in an increase in the temperature of the lead bullet.
Let's denote the initial speed of the bullet as v and its mass as m. The initial kinetic energy (KE) can be calculated using the formula:
KE = 0.5 * m * v^2
Now, when the bullet hits the plate with twice the speed (2v), its kinetic energy becomes:
KE' = 0.5 * m * (2v)^2 = 0.5 * m * 4v^2 = 2 * (0.5 * m * v^2) = 2 * KE
This means the kinetic energy of the bullet is doubled when its speed is doubled. Since the temperature increase (ΔT) is proportional to the kinetic energy, the temperature increase for the identical bullet hitting the plate with twice the speed can be estimated as:
ΔT' = 2 * ΔT
So, the best estimate of the temperature increase for the identical bullet hitting the plate with twice the speed is twice the initial temperature increase (2 * ΔT).

For more such questions on temperature increase

brainly.com/question/26866637

#SPJ11

A. The lens's focal length is 8.0 cm.

B. 12.0 cm separates you from the new image.

C. m = -0.5, Because of the negative magnification, we can infer that the image is perpendicular to the object.

The ability of a lens or curved mirror to focus or bend light depends on its focal length. The distance between the center of the lens or mirror and the point where parallel light rays appear to converge after passing through the lens or reflecting off the mirror is more precisely defined as this distance.

We may infer that the picture is smaller than the original book because the magnitude of the magnification is less than 1 (i.e., the absolute value of the magnification is less than 1).

How do you determine it?

A. The thin lens formula, which is as follows, can be used to determine the focal length of the lens.

1/f = 1/di + 1/do

where f is the lens's focal length, di is its distance from the image, and so is its separation from the object (in this case, the textbook).

We can set di = do = 16.0 cm because the distance between the textbook and its image is 16.0 cm. Using the thin lens formula with these values as inputs, we obtain:

1/f = 1/16.0 + 1/16.0

If we simplify, we get:

1/f = 1/8.0

The result of multiplying both sides by 8.0 is:

f = 8.0 cm

Thus, the lens's focal length is 8.0 cm.

B. We may use the narrow lens calculation once more to get the distance to the new image if the lens is moved to a position where it is 24 cm away from the book.

Since the lens is now 24 cm away from the book, we may set do = 24.0 cm and find di by using the same formula as before:

1/f = 1/di + 1/24.0

1/8.0 = 1/di + 1/24.0

When we simplify and solve for di, we obtain:

di = 12.0 cm

Thus, 12.0 cm separates you from the new image.

C. By using the magnification equation, we may determine whether the new image is bigger, smaller, or the same size as the original book.

m = -di/do

Where m is the image's magnification (a negative sign means the picture is inverted with respect to the object), di is the lens's distance from the image, and do is the lens's distance from the object.

The values from section B allow us to determine the magnification:

m = -12.0/24.0

If we simplify, we get:

m = -0.5

Because of the negative magnification, we can infer that the image is perpendicular to the object.

To know more about focal length, visit:

brainly.com/question/29870264

#SPJ1

The magnetic force will act on the charge carrier in a direction perpendicular to both the magnetic field direction and the velocity direction of the charge carrier.

In this scenario, the magnetic field points along the y-axis in a positive direction, and the charge carrier moves along the z-axis in a negative direction. Since the velocity of the charge carrier is in the same direction as the z-axis, the direction of the magnetic force acting on the charge carrier will be perpendicular to both the y-axis and the z-axis.

To determine the direction of the magnetic force, we can use the right-hand rule. If we point the thumb of our right hand in the direction of the velocity of the charge carrier (i.e., along the negative z-axis), and the fingers in the direction of the magnetic field (i.e., along the positive y-axis), then the direction of the magnetic force will be perpendicular to both and will be directed towards the negative x-axis.

Therefore, the magnetic force acting on the charge carrier will be directed towards the negative x-axis.

To know more about magnetic force, refer here:

https://brainly.com/question/3160109#

#SPJ11

This means that the body stops immediately after the force acting on it becomes zero. Therefore, the correct answer is None of them.

What is Velocity?

Velocity is a physical quantity that describes the speed and direction of motion of an object. It is a vector quantity, which means that it has both magnitude and direction.

To calculate the time taken by the body to stop, we need to use the concept of Newton's second law of motion, which states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass.

The initial force acting on the body is 45 N, and the frictional force opposing its motion is 7.5 N. Therefore, the net force acting on the body is:

Net force = 45 N - 7.5 N = 37.5 N

Using Newton's second law of motion, we can calculate the acceleration of the body:

Acceleration = Net force / Mass = 37.5 N / 80 kg = 0.469 m/[tex]s^{2}[/tex]

Now, to find the time taken by the body to stop, we can use the equation of motion:

v = u + at

where v is the final velocity, u is the initial velocity (which is zero), a is the acceleration, and t is the time taken.

When the force acting on the body becomes zero, the body continues to move with the same velocity until it comes to a stop. Therefore, the final velocity is also zero.

0 = 0 + 0.469 * t

t = 0 / 0.469 = 0 seconds

Learn more about Velocity from given link

https://brainly.com/question/24445340

#SPJ1

a) The amplitude of the magnetic field is approximately 3.34 x 10^-7 T.

b) The average magnitude of the Poynting vector is approximately 1.12 × 10^5 W/m^2.

A light wave is traveling in a glass of index 1.5. If the electric field amplitude of the wave is known to be 100 V/m,

The amplitude of the magnetic field is given as `B = E/c`,

where E is the amplitude of the electric field, and c is the speed of light in a vacuum (3 × 108 m/s).

Therefore,`B = E/c = 100/(3 × 108) = 3.34 × 10^-7 T`

The average magnitude of the Poynting vector is given as

`Pave = 1/(2μ0) * E^2 * n * c`, where E is the electric field amplitude, n is the refractive index of the glass, c is the speed of light in a vacuum, and `μ0 = 4π × 10^-7 T.m/A` is the permeability of free space.

Substituting the given values, we have;

`Pave = 1/(2 × 4π × 10^-7) * (100)^2 * 1.5 * 3 × 10^8 = 1.12 × 10^5 W/m^2`

Therefore, the average magnitude of the Poynting vector is `1.12 × 10^5 W/m^2`.

To know more about light waves click here:

https://brainly.com/question/29299168

#SPJ11

Many physical systems in nature are well-described as a simple harmonic oscillator because they exhibit a restoring force that is directly proportional to the displacement from the equilibrium position.

The simple harmonic oscillator is a model that describes the behavior of many physical systems in nature, including springs, pendulums, and vibrating atoms or molecules. This is because many systems in nature can be modeled as having a restoring force that is proportional to the displacement from an equilibrium position and acts in the opposite direction to the displacement.

This restoring force causes the system to oscillate back and forth around the equilibrium position, and the motion of the system can be described using the principles of harmonic motion. Additionally, the equations that describe simple harmonic motion have simple, elegant solutions, making it a useful and widely applicable model in physics. As a result, the simple harmonic oscillator model is often used to describe and analyze a wide range of physical systems in nature.

To know more about simple harmonic oscillator, here

brainly.com/question/13008541

#SPJ4

Answer:

The answer to your problem is, D. 174 m/s

Explanation:

Formula:

wave speed = frequency * wavelength

Speed of wave = 2Hz × 87m ( Look at question for the numbers )

Speed of wave = 174m/s

Simple math..

Thus the answer to your problem is, 174m/s

To determine in which configuration the box tips over when placed on an inclined plane, consider the following factors:
1. The position of the center of mass (COM) relative to the base of the box.
2. The angle of the inclined plane.
A box will tip over if the line of action of its gravitational force (through the center of mass) falls outside the base of the box.

Following Steps should be followed to determine in which configuration the box tips over :
1. Identify the position of the center of mass (COM) indicated by the dot.
2. Draw a vertical line downwards from the COM (this represents the gravitational force acting on the box).
3. If this vertical line falls within the base of the box, the box will remain stable and not tip over.
4. If the vertical line falls outside the base of the box, the box will tip over.
The box will tip over when its center of mass is positioned such that the gravitational force acts outside the base of the box on the inclined plane.

For similar question on position of the center of mass

https://brainly.com/question/28134510

#SPJ11

You can create a total of 7 different combinations of capacitance using all three capacitors in your circuits.

In the event that you are given three distinct capacitors, C1, C2, and C3, you can make a sum of seven unique mixes of capacitance involving every one of the capacitors in your circuits. To work out the quantity of mixes, you can involve the equation for the all out number of blends of n things taken r at a time, which is nCr = n! /(r! * (n-r)!). For this situation, you need to find the all out number of mixes of the three capacitors taken three all at once, so you can utilize the equation as 3C3 = 3! /(3! * (3-3)!), which streamlines to 1. Subsequently, you can make one blend utilizing every one of the three capacitors. Furthermore, you can make three mixes utilizing two capacitors each, and three blends utilizing just a single capacitor each. This gives a sum of seven distinct mixes of capacitance involving each of the three capacitors in your circuits.

To learn more about combinations of capacitance, refer:

https://brainly.com/question/13151593

#SPJ4

The spring constant of the spring is 1200 N/m.

The Potential energy stored within the spring is given by way of:

PE = (1/2)kx²

The kinetic strength of a shifting object is given by:

KE = (1/2)mv²

At the start, the potential energy of the spring is:

PE = (1/2)kx² = (1/2)k(0.1)² = 0.005k J

In the end, the kinetic energy of the block is:

KE = (1/2)mv² = (1/2)(3.00 kg)(2.00 m/s)² = 6.00 J

Since energy is conserved, we can set the initial energy equal to the final energy and solve for k

0.005k = 6.00

k = 1200 N/m

Potential energy is a concept in physics that refers to the energy that an object possesses due to its position or configuration relative to other objects or forces. It is a type of energy that is stored in an object and has the potential to be converted into other forms of energy, such as kinetic energy, which is the energy of motion.

The potential energy of an object can be calculated based on its position or configuration, and it is proportional to its mass and height above a reference point, as well as other factors such as the strength of gravitational or other forces. For example, a ball held at the top of a hill has potential energy due to its height above the ground, and this energy can be converted into kinetic energy as the ball rolls down the hill.

To know more about Potential energy visit here:

brainly.com/question/24284560

#SPJ4