theoretical principles and practical problems of respect des fonds in archival science

Answers

Answer 1

Answer:

Respect des fonds, or le respect pour les fonds, is a principle in archival theory that proposes to group collections of archival records according to their fonds (according to the entity by which they were created or from which they were received).

Related Questions

What may and may not be carried to the Maldives?

Answers

When traveling to the Maldives, it's important to consider the regulations and restrictions regarding items that may and may not be carried. While I can provide general guidelines, it's always recommended to check with the relevant authorities or your airline for the most up-to-date information. Here are some common items to consider:

Items that may be carried:
1. Personal belongings such as clothing, toiletries, and personal electronics.
2. Prescription medications with a valid prescription.
3. Non-perishable food items for personal consumption.
4. Cash and traveler's checks within the allowed limits.

Items that may have restrictions or require special consideration:
1. Alcohol: The Maldives is a Muslim country, and importing alcohol may have limitations. It's advisable to check the specific regulations and restrictions beforehand.
2. Drones: Bringing drones into the Maldives may require prior approval from relevant authorities and compliance with local drone regulations.
3. Medications: Certain medications, especially those containing narcotics or psychotropic substances, may have restrictions. It's important to carry necessary documentation and check with the Maldives' Ministry of Health or the Maldives Food and Drug Authority for any specific requirements.
4. Wildlife and animal products: The import and export of certain wildlife and animal products, including ivory, tortoise shell, and some coral, are strictly regulated or prohibited.

It's crucial to note that customs regulations and restrictions can change, so it's advisable to consult official sources such as the Maldives Customs Service or the Maldives Immigration Department for the most accurate and up-to-date information regarding items that may or may not be carried to the Maldives.

"A system of symbols structured by grammar and syntax common to a community of people"
a.
perception
b.
verbal communication
c.
language
d.
communication

Answers

Language is A system of symbols structured by grammar and syntax common to a community of people"

What is language

Language refers to a system of symbols, whether spoken or written, that is structured by grammar and syntax and shared by a community of people. It is a means of communication and allows individuals to convey thoughts, ideas, emotions, and information.

Language encompasses both verbal and written forms of communication and plays a crucial role in human interaction and socialization. Through language, individuals can express their perceptions, engage in meaningful communication, and participate in various forms of interpersonal and societal interactions.

Read more on language here https://brainly.com/question/10585737

#SPJ1

Concrete terms can never be used in an abstract or symbolic way.
a) true
c) false

Answers

The correct answer is false. A term might be concrete in a specific type of context but becoming a symbol for an abstract idea is a different thing. This is possible because a symbolic way is usually a idea that stands for another thing.

Use the archetypes chart to answer the question.

Read the excerpt from the NASA article called "July 20, 1969: One Giant Leap for Mankind."

Armstrong and Aldrin blast off and dock with Collins in Columbia. Collins later says that "for the first time," he "really felt that we were going to carry this thing off."

How does this quotation help the reader understand Michael Collins as he is described in The Man Who Went to the Far Side of the Moon?
It shows that he believed that the mission had not been accomplished because the wrong people had been involved.
It shows that although he did not land on the moon, he was invested in the mission’s success.
It shows that he believed that the mission would be accomplished because he was a major part of it.
It shows that he believed the mission would have been more successful if he had been in a different role.

Answers

Answer:

Based on the provided quotation, it can be inferred that the following statement helps the reader understand Michael Collins as he is described in The Man Who Went to the Far Side of the Moon:

"It shows that although he did not land on the moon, he was invested in the mission’s success."

Explanation:

The quotation indicates that Collins felt a sense of collective ownership and responsibility for the mission's success, despite not being the one to physically land on the moon. This highlights Collins' dedication and commitment to the overall mission, suggesting that he was deeply invested in its success, even though he played a different role.

Colombia is a popular tourist destination. Where do tourists like to go?

There is more than one correct answer choice. Be sure to select all that apply.

Responses

historical sites like Castillo San Felipe de Barajas

mountain landscapes

ocean beaches

el aborrajado

Answers

The tourists like to go to;

historical sites like Castillo San Felipe de Barajasmountain landscapesel aborrajado

How to explain the information

Here are some of the most popular tourist destinations in Colombia:

Cartagena: This colonial city is a UNESCO World Heritage Site and is known for its beautiful architecture, including the Castillo San Felipe de Barajas.

Tayrona National Park: This park is located on the Caribbean coast and is home to stunning beaches, lush rainforests, and ancient ruins.

Salento: This town is located in the Coffee Region and is known for its beautiful scenery, including the Valle de Cocora, which is home to towering wax palms.

Colombia is home to a number of great hiking trails, including those in Tayrona National Park and the Coffee Region.

Colombia has some of the best scuba diving in the world, with clear waters and abundant marine life.

Learn more about tourist on

https://brainly.com/question/5501800

#SPJ1

The demeanor of a person can spell a make or break during the conduct of a job interview. Agree or Disagree? Justify.

Answers

I would say that the demeanour of a person, that is, how they behave, their body language, and their attitude, is a very important factor in job interviews. It can make or break the interview, because it provides a clear indication of the candidate's personality, attitude, and how well they would fit into the company's culture.

During an interview, an employer is looking for someone who is confident, competent, and able to communicate well, and this is where demeanour comes into play. If a candidate is nervous, fidgety, or has a poor attitude, it can leave a negative first impression and lower their chances of getting the job. On the other hand, if the candidate is confident, relaxed, and has a positive attitude, it can make them stand out from other candidates and increase their chances of getting hired.

In conclusion, demeanor is an important factor in job interviews because it gives the interviewer a sense of the candidate's personality and how well they would fit into the company's culture. If the candidate has a positive demeanour, it can increase their chances of getting the job, while a negative demeanour can lower their chances.

What is Salesforce Customer 360?

Answers

Answer:

Salesforce Customer 360 is a platform designed to provide a unified view of customer data across different systems and touchpoints. It allows businesses to connect customer data from various sources, such as sales, service, marketing, and commerce, and create a single, 360-degree view of the customer. This enables businesses to better understand their customers, personalize their interactions, and deliver a seamless customer experience across all channels.

1. Rosa was one of the first artists known to have painted nature ‘en plein air’ or .............

a) from imagination
b) out of doors
c) realistically
d) overnight

Answers

Answer:

B) Out of doors

Explanation:

"en plein air" translates to outside or in this case "out of doors"

b) out of doors. Rosa was one of the first artists known to have painted nature in the open air, or ‘en plein air’. This refers to the practice of painting outdoors rather than in a studio, allowing the artist to capture the dynamic and changing nature of light and the natural environment.

Which of the following phrases are incorrect? Why?

El chico alta.
La clase grande.
Unos muchachas cómico.

Answers

The incorrect phrases are:

El chico alta.Unos muchachas cómico.

What are the phrases

The reason for the incorrect forms is the disagreement between the gender of articles (el, unos) and the nouns they modify (chico, muchachas), as well as the differences that exist between the gender of the adjectives (alta, cómico) and the nouns they qualify.

The right phrase is "El chico alto. " Since "chico" is a masculine noun in Spanish, the corresponding adjective must also be in the masculine form, which is "alto" (denoting "tall").

Learn more about phrases from

https://brainly.com/question/27892321

#SPJ1

Other Questions

Let 1 3 -2 +63 A = 0 7 -4 0 9 -5 Mark only correct statements. The algebraic multiplicity of each eigenvalue of A equals its geometric multiplicity b. The Jordan Normal form of A is made of one Jordan block of size two and one Jordan block of size one. A is diagonalizable 0 (-) 3 e. The Jordan Normal form of A is made of three Jordan blocks of size one. d. 2 ER(A - I) Which of the following are true of the k-nearest neighbours (KNN) algorithm applied to an n-dimensional feature space? i. For a new test observation, the algorithm looks at the k training observations closest to it in n-dimensional space and assigns it to the majority class among those k observations.ii. For a new test observation, the algorithm looks at the k training observations closest to it in n-dimensional space and assigns it proportionally to each class represented in those k observations.iii. KNN models tend to perform poorly in very high dimensions.iv. KNN models are well-suited to very high-dimensional data.v. The K in KNN stands for Kepler, the scientist who first proposed the algorithm.a. i and iiib. i onlyc. ii and ivd. i, iv and ve. i, iii and v you to analyse a single phase inverter utilizing thyristors that supply an RL load (R=1092 and L-25mH). Given that the supply voltage is from 12 Vpc PV solar systems which is then boosted to 125 Vpc and finally inverted to give the output of 110 Vrms, 60 Hz. Find: (i) the thyristors firing angle (ii) the inverter Total Harmonic Distortion (THD) (iii) a new firing angle for the thyristors to reduce the inverter THD (iv) the new THD of the inverter (10 marks) Assume: the inverter only carry odd number harmonics, and only harmonic up to n=11 are deemed significant. Question 3 The following sentence can exhibit some syntactic ambiguity. "The ninja fought the intruder with the knife." Determine the two possible interpretations of the sentence. For each interpretation, provide a paraphrase of the interpretation and draw the corresponding syntactic tree structure diagram. [6 points] **Note: you should draw the syntactic tree for the sentence above. It's meaning should reflect the paraphrase you give. Interpretation 1: Interpretation 2: Part A Identify which sets of quantum numbers are valid for an electron. Each set is ordered (n, l, me, m.). Check all that apply. View Available Hint(s) 4,3,1,-1/2 2,3,1,1/2 3,2,1,-1 3,1,1,-1/2 O2,-1,1,-1/2) 3,3,-2,-1/2 2,1,1,1/2 4,3,-5,-1/2 1,1,0,1/2 3,2,-1,-1/2 2,1,-1,1/2 0,2,1,1/2 What are these three answers? What major forces in US history since 1877 led to the nationwe live in today? Suppose there is a coordinate (1, 3) at the end of a terminal arm and represents the angle in standard position. Determine the exact values of sin , cos , and tan . PLEASE INCLUDE STEP BY STEP EXPLANATION PLEASE WITH WORDS help me plsWhich point on the scatter plot is an outlier? (4 points)A scatter plot is shown. Point D is located at 1 and 1, Point C is located at 2 and 3, Point B is located at 7 and 6, and Point A is located at 8 and 1. Additional points are located at 2 and 2, 4 and 3, 5 and 5, 6 and 4. aPoint A bPoint B cPoint C dPoint D Q-1 Write block of code to display if a year entered by the user is a leap year or not.Q-2 Write code to display a menu for the user who is visiting a mechanic shop. Menu should have three services and assign a price for each. Ask the user what service they want and give them a total based on services they selected. Ask if they need more services, end the program if user writes "end"Q-3 ] Is it possible to sort elements of an array? If yes, write a practical reason sorting array elements may be helpful in a program.Language needed is C Let A[1..n] be an array of n positive numbers. Entry A[i] represents the trading price of a stock X on the i-th day (and hence the numbers are ordered chronologically). Write an algorithm max-profit that returns a pair (a, b) such that if one buys stock X on the a-th day and sells it on the b-th day, the maximum profit is made. Give the time complexity of your algorithm in Big-0. Show the derivation of the complexity result. my with the body. 13 1 point A Humanistic psychotherapist would emphasize their clients': determinism and biological drives. natural selection and practical skills. free will, self-image, and self-act Incorrect Question 11 Incorrect What is the type of response categories of the following example? "How many days of the week do you talk to the parents of your teenager's friends? 0, 1, 2, 3, 4, 5, 6, DFIGS are widely used for geared grid-connected wind turbines. If the turbine rotational speed is 125 rev/min, how many poles such generators should have at 50 Hz line frequency? (a) 4 or 6 (b) 8 or 16 (c) 24 (d) 32 (e) 48 C37. The wind power density of a typical horizontal-axis turbine in a wind site with air-density of 1 kg/m' and an average wind speed of 10 m/s is: (a) 500 W/m2 (b) 750 W/m2 (c) 400 W/m2 (d) 1000 W/m2 (e) 900 W/m2 C38. The practical values of the power (performance) coefficient of a common wind turbine are about: (a) 80% (b) 60% (c) 40% (d) 20% (e) 90% C39. What is the tip-speed ratio of a wind turbine? (a) Blade tip speed / wind speed (b) Wind speed / blade tip speed (c) Generator speed / wind turbine speed (d) Turbine speed / generator speed (e) Neither of the above C40. Optimum control of a tip-speed ratio with grid-connected wind turbines allows: (a) Maximum power point tracking (b) Maximum wind energy extraction (c) Improved efficiency of wind energy conversion (d) Maximum power coefficient of a wind turbine (e) All of the above are true Instructions: It should be an Assembly program, written entirely from scratch by you, satisfying the requirements specified below. It is very important that you write easily readable, well-designed, and fully commented code [You must organize your code using procedures]. Use Keil uvision 5 software to develop an ARM assembly program with the followings specifications: a) Declare an array of at least 10 8-bit unsigned integer numbers in the memory with initial values. e.g. 34, 56, 27, 156, 200, 68, 128,235, 17, 45 b) Find the sum of all elements of the array and store it in the memory, e.g. variable SUM. c) find the sum of the even numbers in this array and store it in the memory, e.g. variable EVEN d) Find the largest power of 2 divisor that divides into a number exactly for each element in the array and store it in another array in the memory. You have to use a procedure (function), POW2, which takes an integer as an input parameter and return its largest power of 2. For example, POW(52) would return 4, where POW(56) would return 8, and so on. Hint: You can find the largest power of 2 dividing into a number exactly by finding the rightmost bit of the number. For example, (52) 10 (110100), has its rightmost bit in the 4's place, so the largest power of 2 divisor is 4; (56)10 (111000)2 has the rightmost bit in the 8's place, so its largest power of 2 divisor is 8. 1 9. Consider an electrochemical cell constructed from the following half cells, linked by a KCI salt bridge. a Fe electrode in 1.0 M FeCl, solution a n electrode in 1.0 M Sn(NO) solution (25 pts) Based on constructing a working electrochemical cell, identify the anodic half cell and cathodic half cell: Determine the ultimate load for a 450 mm diameterspiral column with 9- 25 mm bars. Use 2015 NSCP. f'c = 28 MPa, fy =415 MPa. Lu = 3.00 m Based on World Health Organization (WHO), a chemical incident has been defined as "an unexpected uncontrolled release of a chemical from its containment". There are many chemical incident such as chemical spillage, explosion, and chemical leakage have occurred. Based on Occupational Safety and Health (Safety and Health Officer) Order 1997, an employer of the class of industries listed in the order including the chemical industries must employ a competent and qualified person to act as a Safety and Health Officer (SHO) at the work place. As the SHO of a company known as Company ABC, you were asked to prepare a report regarding following matters: 1. Give a brief introduction of the background and activities done by Company ABC. 2. State the control measures that can be taken by the employer to control the chemicals hazardous to health based on Occupational Safety and Health (Use and Standards of Exposure of Chemicals Hazardous to Health) Regulations 2000. Then, give examples for each control measures stated. 3. Elaborate the sections in Occupational Safety and Health (Use and Standards of Exposure of Chemicals Hazardous to Health) Regulations 2000 that stated the duties of employer to ensure labelling of chemicals, give information, instruction and training to the employer regarding the chemicals hazardous to health. 4. Give an example of chemical hazardous to health at your company. Then, explain about the toxic effects of the chemicals to individual and society. 5. As the SHO, what are your suggestions to the employer regarding the common measures to reduce the health risks of chemical incidents at your workplace? Identify and explain what gender role attitudes are. What aresome gender role attitudes that you grew up with or currently have?How do these impact you? Fairchild, Inc., manufactures two products , Regular and Deluxe, and applies overhead on the basis of direct labor hours. Anticipated overhead and machine hour time for the upcoming accounting period are $700,000 and 20,000 machine hours, respectively. Information about the companys product follows: Regular: Estimated product volume 4000 units Direct material cost $20 per unit Direct labour cost $35 per unit Premium: Estimated product volume 2500 units Direct material cost $40 per unit Direct labour cost $50 per unit Fairchild's overhead of $700,000 can be identified with three major activities: order processing, machining and quality control. These activities are driven by number of orders processed, machine hours worked, and inspection hours, respectively. Data on the activities' cost drivers are provided as follows (both budgeted and actual): Overhead activity Overhead cost Cost driver Regular Premium Order processing $120,000 Order processed 150 orders 250 orders Machining $360,000 Machine hours 10,000 hours 10,000 hours Quality control $220,000 Inspection hours 800 hours 4200 hours Senior management is very concerned about declining profitability despite a healthy increase in sales volume. The decrease in profit is especially concerning because the company installed highly automated machinery which was expected to improve operation efficiencies. Required: i) Assuming the use of machine hours is used to apply overhead costs to production, calculate the unit manufacturing costs of the Regular and Premium products if the expected manufacturing volume is attained. (2 marks) ii) Assuming use of activity-based costing, calculate the unit manufacturing costs of the Regular and premium products if the expected manufacturing volume is attained. (5 marks) iii) Based on the answers in part i) and ii), comment on the differences in the costs calculated using the two product costing systems. (2 marks) iv) Fairchild's selling prices are based heavily on cost. Is it possible that the differences in the costs calculated using the two product costing systems and the subsequent determination of selling prices are contributing to the companys declining profitability? Explain.