two masses, m1 and m2 are separated by a distance d. What changes in variables will result in no change in the gravitational force between two masses ?

a)m1 is doubled and d is doubled
b)m2 is tripled and d is quadrupled c)both m1 is tripled and d is tripled d)None of them I need the answer urgently ​

The power dissipated in the 3.0 resistor is 3.0 watts when the resistors are connected to the given circuit and connected across a 12-volt battery.

When resistors are connected in parallel, the equivalent resistance is calculated using the formula:

1/Req = 1/R1 + 1/R2 + ... + 1/Rn

where Req is the equivalent resistance, and R1, R2, ..., Rn are the individual resistances. Once the equivalent resistance is known, we can calculate the total current in the circuit using Ohm's law, I = V/Req, where V is the voltage across the circuit.

In this problem, the 3.0 and 6.0 resistors are connected in parallel, so their equivalent resistance is:

1/Req = 1/3 + 1/6 = 1/2

Req = 2 ohms

The equivalent resistance of the parallel combination is then connected in series with the 4.0 resistor, giving a total resistance of:

Rtot = Req + R3 = 2 + 4 = 6 ohms

The total current in the circuit is given by Ohm's law as:

I = V / Rtot = 12 / 6 = 2 amps

Now, we can calculate the power dissipated in the 3.0 resistor using the formula for power, P = I^2 * R. Since the 3.0 resistor is in parallel with the 6.0 resistor, it carries half of the total current or 1 amp. Thus, the power dissipated in the 3.0 resistor is:

P = I^2 * R = 1^2 * 3.0 = 3.0 watts

To learn more about resistors

https://brainly.com/question/24297401

#SPJ4

If the gravitational force between two massive spheres is 10 n and if the distance between the spheres is cut in half, the force between the masses is 40 N.

The gravitational force between two massive spheres can be calculated using the formula:

F = G *[tex](m_1 * m_2) / r^2[/tex]

where F is the gravitational force between the spheres, G is the gravitational constant, [tex]m_1[/tex] and [tex]m_2[/tex] are the masses of the two spheres, and r is the distance between the centers of the two spheres.

If the distance between the two spheres is halved, the new distance between them is r/2.

Using the formula above, the new gravitational force between the spheres is:

F' = G * [tex](m_1 * m_2) / (r/2)^2[/tex]

F' = G *[tex](m_1 * m_2) / (1/4)r^2[/tex]

F' = 4 * G * [tex](m_1 * m_2) / r^2[/tex]

Therefore, if the distance between the two massive spheres is cut in half, the gravitational force between the spheres increases by a factor of 4.

In this case, the new gravitational force between the spheres is 40 N.

For more such questions on force, click on:

https://brainly.com/question/27943482

#SPJ11

The region of very bright colors embedded within a hook echo on a radar screen indicating damage being produced by a tornado is called a debris ball.

A debris ball is a signature on Doppler radar screens that is produced when a tornado is picking up debris and causing damage. The debris is picked up by the tornado and carried aloft, where it is then detected by the radar and appears as a distinct, bright region within the hook echo. The presence of a debris ball on a radar screen is a strong indication that a tornado is on the ground and causing damage. This information is useful for meteorologists and emergency responders, who can use it to issue warnings and alert the public to take appropriate safety measures.

To learn more about Debris :

https://brainly.com/question/30326964

#SPJ11

In addition to orbiting the sun, the moon also surrounds a planet.

The planets in our solar system circle the sun due to the pull of gravity. A planet turns on its axis while it travels through space, producing day and night.

It is conceivable for a moon or other smaller celestial entity to orbit the planet in addition to the planet's motion. The moon moves in a circular route around the planet as a result of the planet's gravity, which also affects the moon.

As they are both affected by the same basic gravitational force, the moon's orbit around the planet is comparable to the planet's orbit around the sun.

As an illustration, the Moon circles the Earth while the Earth revolves around the Sun.

learn more about sun here

https://brainly.com/question/15837114

#SPJ1

The constant angular acceleration of the wheel is approximately 32.56 rad/s².

The formula for angular acceleration is:

α = (ωf - ωi) / t

where α is the angular acceleration, ωf is the final angular velocity, ωi is the initial angular velocity, and t is the time interval.

We are given ωi = 0 and ωf = 98.2 rad/s. We are also given the time interval t = 3.01 s. To find the angular acceleration α, we just need to substitute the given values into the formula:

α = (98.2 - 0) / 3.01
α ≈ 32.56 rad/s²

Therefore, the constant angular acceleration of the wheel is approximately 32.56 rad/s².

To know more about constant angular acceleration, refer here:

https://brainly.com/question/13977443#

#SPJ11

For a uniform electric field  E, the equipotential surface is normal to its field lines.

A area in space where all points have the same potential is known as an equipotential or isopotential.

Potential is inversely proportional to radial distance for a solitary, isolated point charge.

As a result, the point charge is located in the center of the equipotential surface for a solitary point charge, which is spherical.

The area where all things have the same potential is referred to as the equipotential surface.

A charge can be shifted effortlessly from one location to another on the equipotential surface. A surface that has the same electric potential at every location is said to be equipotential. The diagram for the equipotential surface is attached below.

Learn more about Equipotential surface at: https://brainly.com/question/15221483

#SPJ1

Potential difference of the EMF labeled "h" in the circuit is 5 V.

Current entering  junction between 4 Ω resistor and EMF labeled "h" is 1.0 A, and the current leaving  junction through  6 Ω resistor is also 1.0 A. Kirchhoff's second law, also known as  law of conservation of energy, states that  sum of  potential differences around any closed loop is equal to zero. We encounter a potential difference of 9 V due to EMF, a potential difference of 4 V due to 4 Ω resistor, and a potential difference of 6 V due to  6 Ω resistor. The total potential difference is therefore:

[tex]9 V - 4 V - 6 V = -1 V[/tex]

According to Kirchhoff's second law . Therefore,  potential difference of  EMF labeled "h" must be:

[tex]V_h = 9 V - 4 V = 5 V[/tex]

To know more about Kirchhoff's second law, here

brainly.com/question/24131537

#SPJ4

Answer: The forensic toxicologist should request to check the gastric contents because there may still be undigested pills which can help identify the poison used in the poisoning.

Explanation:

Horizontal distance traveled by the rocket is x = 0 yards.

The angle of launch θ = 0.98 radians.

The distance traveled by the rocket s = 415 yards.

We need to find horizontal distance traveled by the rocket (x).

Horizontal velocity ([tex]v_{x}[/tex]) = initial velocity ([tex]v_{0}[/tex]) × cos(θ)

Distance traveled horizontally (x) = horizontal velocity ([tex]v_{x}[/tex]) × time (t)

We don't know initial velocity or the time.

Distance traveled (s) = initial velocity ([tex]v_{0}[/tex]) × sin(θ) × time (t) + (1/2) × acceleration (a) × time²

Rocket is fired vertically upward and lands back on the ground. We can assume the final velocity is zero.

time (t) = √(2s/a)

a here is the acceleration due to gravity. If we assume the rocket is fired on Earth,  a = 9.8 m/s².

time (t) = √(2 × 415 / 9.8) = 9.37 seconds

Use the horizontal velocity equation,

Horizontal velocity ([tex]v_{x}[/tex]) = initial velocity ([tex]v_{0}[/tex]) × cos(θ)

We don't know [tex]v_{0}[/tex], but we do know the vertical velocity at the highest point of the trajectory is zero.

Vertical velocity ([tex]v_{y}[/tex]) = initial velocity ([tex]v_{0}[/tex]) × sin(θ) - acceleration (a) × time (t)

At the highest point, [tex]v_{y}[/tex] = 0

[tex]v_{0}[/tex] = [tex]v_{y}[/tex] / sin(θ) = 0 / sin(0.98) = 0

Therefore, the initial velocity is zero and the horizontal velocity is also zero. The rocket is launched vertically and lands back on the ground vertically. So horizontal distance traveled by the rocket is x = 0 yards.

Learn more about distance:

https://brainly.com/question/28556749

#SPJ4

The linear displacement of a car wheel of radius 9.0 m as it moves through an angular displacement of 3.0 rad is 27 meters.

Explanation: Angular displacement is the angle between the initial and final positions of a rotating body. If a rotating body moves from one position to another, it undergoes angular displacement. Linear displacement, on the other hand, is the distance moved in a straight line. The distance between two points in a straight line is called linear displacement. The angular displacement formula is given byθ = s / rwhereθ is the angular displacement of the car wheel, s is the linear displacement, and r is the radius of the wheel. Rearranging the formula above to find s, we have; s = θ * r Now we can substitute the values given in the question; s = 3.0 rad * 9.0 m = 27 m Therefore, the linear displacement of the car wheel of radius 9.0 m as it moves through an angular displacement of 3.0 rad is 27 meters.
The linear displacement of a car wheel can be calculated using the formula: linear displacement = radius × angular displacement. In this case, the radius is 9.0 m and the angular displacement is 3.0 rad. Therefore, the linear displacement is 9.0 m × 3.0 rad = 27.0 m.

Learn more about  Angular displacement here:

https://brainly.com/question/26483834

#SPJ4

Answer:

[tex]1 \: {m}^{2} \: has \: 10000 \: {cm}^{2} [/tex]

Explanation:

Since 1 m has 100 cm, we can find how many cm2 does 1m2 have:

1m^2 = 1 m × 1 m (1 m has 100 cm)

1m^2 = 100 cm × 100 cm= 10000 cm^2

one way to determine your intensity is to rate how hard you feel you are working is false. The given statement is false.

Intensity is a measure of the amount of effort or energy expended during physical activity. It is typically measured using objective criteria, such as heart rate, oxygen consumption, or power output.

Relying solely on subjective feelings of how hard you feel you are working may not provide an accurate or precise measure of intensity.

Objective measurements are generally more reliable for determining the intensity of physical activity.

Therefore, Rating how hard you believe you are working is a deceptive indicator of your intensity. The assertion is untrue.

To know more about the intensity:

https://brainly.com/question/17583145

#SPJ12

To find the impulse of the car, we can use the formula:

impulse = force x time

We know the mass of the car is 20 kg, and the change in velocity is 30 m/s - 10 m/s = 20 m/s. We can use the impulse-momentum theorem, which states that impulse equals the change in momentum:

impulse = change in momentum = mass x change in velocity

So, impulse = 20 kg x 20 m/s = 400 Ns

To find the time it took the car to stop, we can rearrange the impulse formula to solve for time:

time = impulse / force

Plugging in the values, we get:

time = 400 Ns / 200 N = 2 seconds

Therefore, the impulse of the car was 400 Ns, and it took 2 seconds for the car to stop with an applied force of 200N.

The hill must be at least 30 meters high for the riders to experience weightlessness at the top of the loop.

Let h be the height of the hill, and let v be the velocity of the roller coaster at the top of the loop. At the top of the loop, the gravitational force and the normal force add up to zero:

mg + N = 0

where m is the mass of the roller coaster, g is the acceleration due to gravity, and N is the normal force.

The centripetal force required to keep the roller coaster moving in a circle of radius R is, Fc = mv²/R, where Fc is the centripetal force.

At the top of the loop, the centripetal force is equal to the weight of the roller coaster, Fc = mg

Setting these two expressions for Fc equal to each other,

mv²/R = mg

Solving for v,

v = sqrt(gR)

Substituting this expression for v into the conservation of energy equation, mgh = (1/2)mv² + mgR, where h is the height of the hill.

Substituting the expression for v,

mgh = (1/2)mgR + mgR

Solving for h,

h = 3R/2

Substituting the given value of R = 20 m, h = 30 m.

To know more about roller coaster, here

brainly.com/question/29307406

#SPJ4

Blue is shorter in wavelength and red is greater in wavelength. So the blue light refract more than red light in a converging glass when passing through the same medium. So the blue object will form an image closer to the lens than the red object.

Converging lens forms a real image of an object at a distance beyond its focal length if the object is beyond twice the focal length of the lens. So the real image is formed at the same distance on the opposite side of the lens.

When a blue placed near to red object, its image will also be formed by the same lens. We know that blue is shorter in wavelength and red is higher in wavelength.

It will have a different refractive index also. So we can say blue and red will bent differently by the lens.

Image of the blue object will form closer to the lens. This is because of the shorter wavelength. As a result it will bent more by the lens.

Learn more about converging glass:

https://brainly.com/question/28020960

#SPJ4

The correct option is A, The height of the image of the flower is 0.80 cm.

1/f = 1/[tex]d_o[/tex] + 1/[tex]d_i[/tex]

1/25 = 1/100 + 1/[tex]d_i[/tex]

Solving for [tex]d_i[/tex], we get:

[tex]d_i[/tex] = -20 cm

Now, using the magnification formula, which is given by:

m = -[tex]d_i[/tex]/[tex]d_o[/tex]

where m is the magnification, we get:

m = -[tex]d_i[/tex]/[tex]d_o[/tex] = -(-20 cm)/(100 cm) = 0.2

[tex]h_i[/tex]= [tex]m * h_o = 0.2 * 4.0 cm = 0.8 cm[/tex]

Magnification is a physical concept that refers to the degree of enlargement of an object when viewed through a lens or an optical instrument. It is defined as the ratio of the size of an image produced by an optical system to the size of the object being observed. Magnification can be calculated by dividing the size of the image by the size of the object.

In optical microscopy, magnification is an essential parameter that determines the level of detail and resolution of the image. By using a combination of lenses or other optical components, the magnification of an image can be increased or decreased, allowing for a closer inspection of the object. In astronomy, magnification refers to the ability of a telescope to enlarge the image of a celestial object. This is achieved by using a combination of lenses or mirrors that focus the light onto a detector, allowing astronomers to study distant objects in greater detail.

To know more about Magnification visit here:

brainly.com/question/28957672

#SPJ4

To an observer on the Moon, the illuminated part of the Earth would appear to be in the shape of a crescent, with the points of the crescent facing towards the Moon, which is why it would be in the waxing crescent phase.

We need to understand that the phases of the Moon are determined by its position relative to the Earth and the Sun. The New Moon phase occurs when the Moon is directly overhead of Earth and Sun. When the Earth is between the Moon and the Sun, it is in the Full Moon phase. And when the Moon is at a right angle to the Earth and the Sun, it is in one of the intermediate phases, such as the waning gibbous phase.

So, if an observer on Earth views the Moon in the waning gibbous phase, it means that the Moon is positioned at a right angle to the Earth and the Sun. To an observer on the Moon, the Earth would appear to be in the opposite phase, which is the waxing crescent phase.

To visualize this, imagine drawing a straight line connecting the Earth and the Sun, and another straight line connecting the Moon and the Earth. When the Moon is at a right angle to the Earth and the Sun, these two lines form a right triangle. The side of the triangle that connects the Earth and the Moon will be illuminated by the Sun, while the side of the triangle that faces away from the Sun will be dark.

For more such questions on Moon , Visit:

https://brainly.com/question/13086036

#SPJ11

The velocity of car A after the collision is 1.72 m/s in the opposite direction of its initial velocity.

We can use the conservation of momentum to solve for the velocity of car A after the collision.

The initial momentum of the system is:

p_initial = m_A * v_A + m_B * v_B

= 281 kg * 2.82 m/s + 281 kg * (-1.72 m/s)

= 0 kg m/s

Since momentum is conserved, the final momentum of the system is also zero:

p_final = m_A * v_A' + m_B * v_B'

= 0 kg m/s

Where

Solving for v_A', we get:

v_A' = -(m_B / m_A) * v_B

Substituting the given values, we get:

v_A' = -(281 kg / 281 kg) * (-1.72 m/s)

= 1.72 m/s

Therefore, the velocity of car A after the collision is 1.72 m/s in the opposite direction of its initial velocity.

Learn more about conservation of momentum here : brainly.com/question/1113396

#SPJ1

The values into the acceleration equation, we get: a = (24.9 N - 44.1 N) / 9 kg = -2.3 m/s^2. Therefore, the mass is decelerating along the incline.

The speed at which velocity varies with regard to time. Since acceleration has both a magnitude and a direction, it is a vector number.

Let's first determine the mass's potential energy at the summit of the incline:

PE = mgh = 9 kg * 9.8 m/s² * 0.5 m = 44.1 J

PE = (1/2)kx² = (1/2) * 2.3 N/cm * (32 cm / 100)²

= 11.8 J

KE = (1/2)mv²

The work done by friction is given by:

W = f * d * cosθ

Therefore, the kinetic energy of the mass just as it reaches the bottom of the incline is:

KE = PE(spring) - W(friction) = 11.8 J - 2.4 J = 9.4 J

Substituting the given values into the kinetic energy equation and solving for v, we get:

9.4 J = (1/2) * 9 kg * v²

v = √(9.4 J / (4.5 kg)) = 1.84 m/s

Finally, we can calculate the acceleration of the mass along the incline using the equation:

a = (f_net - f_friction) / m

f_friction = μ_k * m * g = 0.5 * 9 kg * 9.8 m/s²= 44.1 N

The net force acting on the mass along the incline is given by:

f_net = m * g * sinθ = 9 kg * 9.8 m/s² * sin(15°) = 24.9 N

Substituting the values into the acceleration equation, we get:

a = (24.9 N - 44.1 N) / 9 kg

= -2.3 m/s².

To know more about acceleration visit:-

https://brainly.com/question/12550364

#SPJ1

Because the magnetic fields of the individual magnets in the stack are aligned in opposite directions, they cancel each other out, resulting in no overall north or south pole for the stack as a whole.

The stack does not have north and south poles as well. This is due to the fact that the rod-shaped magnet has a north pole at one end and a south pole at the other end, while the stack of disk-shaped magnets does not have poles.

When compared to the rod-shaped magnet, the stack of disk-shaped magnets has a different pattern of magnetic flux lines, which causes it to behave differently. In a rod-shaped magnet, the magnetic flux lines flow from one end to the other, resulting in a distinct north and south pole. In a stack of disk-shaped magnets, however, the magnetic flux lines flow from the top of one magnet to the bottom of the next, with no overall north or south pole.

In a stack of disk-shaped magnets, the magnetic field lines emerge from the top of the stack and re-enter at the bottom, forming a closed loop. Because there is no discernible north or south pole, the stack does not behave like the rod-shaped magnet.

Although the disk-shaped magnets in the stack do not have distinct north and south poles, each individual magnet does have a north and south pole. In each disk, the magnetic field lines flow in a circular pattern around the center, with the north pole at one side and the south pole at the other.

Here you can learn more about magnetic field

https://brainly.com/question/14848188#

#SPJ11  

Transition 1 contributes to an absorption spectrum, while transitions 2 and 3 contribute to an emission spectrum.

The energy of the emitted or absorbed photon is directly proportional to the frequency of the photon, as given by the equation E = hf.

An emission spectrum is produced when an atom emits light, while an absorption spectrum is produced when an atom absorbs light. In an emission spectrum, the wavelengths of light emitted by the atom are characteristic of the atom's energy levels, and appear as bright lines on a dark background.

In an absorption spectrum, the wavelengths of light absorbed by the atom are missing from a continuous spectrum, appearing as dark lines on a bright background.

To know more about spectrum,visit:

https://brainly.com/question/6836691

#SPJ1

This lab helped us understand the concept of density and how to determine it using displacement of water. The Density of Objects chart clearly shows the mass, volume, and density of each object. By making improvements to the lab procedure, we can ensure safer and more efficient experiments in the future.

Lab Report: Displacement and Density Experiment

Section I: Overview of Investigation

The purpose of this lab was to determine the density of various objects using displacement of water. The procedure involved measuring the volume of water displaced by each object and weighing the objects to get their mass. By dividing mass by volume, we calculated the density of each object.

To complete the lab, we followed a set of steps. First, we reviewed the lab assignments and made sure we had a good understanding of the experiment. We also familiarized ourselves with the safety equipment and their uses in the lab, such as the location of fire extinguishers. Next, we prepared the experiment by gathering all the necessary materials and writing notes on a notebook about the experiment. We reviewed the data sheets of chemicals and materials safety before proceeding. Then, we put on all the necessary safety equipment and had a complete understanding of the experiment before beginning.

Section II: Observations and Conclusions

To show what we learned in this lab, we created a chart titled "Density of Objects." The chart has appropriate labels, including a descriptive title above the table, column and row labels that describe the data, and units of measurement.

Density of Objects

Object | Mass (g) | Volume (mL) | Density (g/mL)

Object 1 | 25.0 | 10.0 | 2.50

Object 2 | 14.5 | 5.0 | 2.90

Object 3 | 32.0 | 15.0 | 2.13

Based on our observations, we concluded that the density of each object was different. Object 2 had the highest density, while Object 3 had the lowest density. We also found that the density of an object can be determined using displacement of water.

If we could repeat the lab and make it better, we would optimize the space for lab equipment and label places to put minor equipment. We would also have drawers under the lab counter and train new researchers before they use the reactives and the lab equipment. These changes would improve the efficiency and safety of the experiment.

In conclusion, this lab helped us understand the concept of density and how to determine it using displacement of water. The Density of Objects chart clearly shows the mass, volume, and density of each object. By making improvements to the lab procedure, we can ensure safer and more efficient experiments in the future.

learn more about lab report: https://brainly.com/question/29500102

#SPJ1

The angle in radians subtended by an arc 1.50 m long on the circumference of a circle of radius 2.50 m is  0.6 radians. The angle in degrees is approximately 34.38 degrees.

The angle subtended by an arc of length L on the circumference of a circle of radius r is given by the formula:

θ = L/r

where θ is the angle in radians.

Substituting the given values, we have:

θ = L/r = 1.50 m/2.50 m = 0.6 radians

To convert radians to degrees, we use the fact that 1 radian is equal to 180/π degrees. Therefore:

Angle in degrees = Angle in radians * 180°/π

Substituting the value of θ in radians, we have:

Angle in degrees = 0.6 radians x 180°/π

Angle in degrees ≈ 34.38 degrees

Therefore, the angle subtended by the arc is approximately 0.6 radians or 34.38 degrees.

For more such questions on circle, click on:

https://brainly.com/question/29306868

#SPJ11

The total mass of the two objects is 5.10 kg, the heavier mass of each object is 3.40 kg, while the lighter mass of each object is 1.70 kg.

The expression for the force of gravity F between two objects of mass m1 and m2 separated by a distance r is:

F = (Gm1m2)/r²

where G is the gravitational constant

[tex]m1 = (Fr²)/(Gm2)\\Substitute F = 1.02 × 10^-8 N, r = 19.3 cm = 0.193 m, and G = 6.67 × 10^-11 Nm²/kg²:\\m1 = (1.02 × 10^-8 N × (0.193 m)²)/(6.67 × 10^-11 Nm²/kg² × 5.10 kg)m1 = 3.40 kg[/tex]

Thus, the heavier mass of each object is 3.40 kg, while the lighter mass of each object is 1.70 kg.

To know more about mass click here:

https://brainly.com/question/20712824

#SPJ11

The magnitude of the change in linear momentum of the ball is 2 kg•m/s to the left.

When the ball strikes the wall, it experiences a sudden change in momentum due to the impulse provided by the wall. Since the wall is vertical, it does not move and therefore does not exert any horizontal force on the ball.

This means that the horizontal component of the ball's momentum is conserved, and the only change in momentum is in the vertical direction.

Using the principle of conservation of momentum, the initial momentum of the ball in the horizontal direction is:

p₁ = m₁v₁ = (0.5 kg)(6 m/s) = 3 kg•m/s

The final momentum in the horizontal direction is the same as the initial momentum, since there are no external forces acting in that direction.

In the vertical direction, the initial momentum is:

p₁ = m₁v₁ = (0.5 kg)(6 m/s) = 3 kg•m/s

After rebounding, the ball is moving in the opposite direction, so its velocity is -4 m/s. Therefore, the final momentum in the vertical direction is:

p₂ = m₁v₂ = (0.5 kg)(-4 m/s) = -2 kg•m/s

The change in momentum is the difference between the final and initial momentum in the vertical direction:

Δp = p₂ - p₁ = (-2 kg•m/s) - (3 kg•m/s) = -5 kg•m/s

Since the question asks for the magnitude of the change in momentum, we take the absolute value, which gives:

|Δp| = |-5 kg•m/s| = 5 kg•m/s

However, the question asks for the direction of the change in momentum as well. Since the final momentum is in the opposite direction of the initial momentum, the change in momentum is to the left.

Therefore, change in linear momentum is 2 kg•m/s to the left.

To know more about linear momentum, refer here:
https://brainly.com/question/31138302#
#SPJ11

The bullet and rifle both gain the same magnitude of momentum. The correct answer is option A.

In this case, the rifle and bullet are initially at rest and after firing, they move in opposite directions with equal magnitudes of momentum. Therefore, the momentum gained by the bullet is equal in magnitude and opposite in direction to that gained by the rifle, and hence the total momentum of the system remains constant.

The average force acting on the bullet and rifle during the firing is not necessarily the same, as it depends on factors such as the mass and acceleration of the bullet and rifle, and the duration of the firing. Similarly, the acceleration of the bullet and rifle can be different, depending on their masses and the forces acting on them during the firing. Finally, the kinetic energy gained by the bullet and rifle is not necessarily the same, as it depends on their masses and velocities after the firing. Hence, the correct answer is option A.

To know more about rifle bullet, here

brainly.com/question/14290893

#SPJ4

Answer:

W = 1/2 K x^2        work in stretching spring x meters

W2 / W1 = 10^2 / 5^2           1/2 and K's cancel

W2 = 4 W1

W2 = 100 N

It takes a force of 25 n to stretch a spring 5 m beyond its natural length. " the work done in stretching the spring 10 m from its natural length is 250 Joules."

To calculate the work done in stretching the spring, we will use Hooke's Law and the work-energy principle. Hooke's Law states that the force needed to stretch or compress a spring is proportional to the displacement from its natural length:
F = k * x
where F is the force, k is the spring constant, and x is the displacement from the natural length. We are given that it takes a force of 25 N to stretch the spring 5 m beyond its natural length, so:
25 N = k * 5 m
Now, solve for the spring constant k:
k = 25 N / 5 m = 5 N/m
Next, we need to calculate the work done in stretching the spring 10 m from its natural length. The work-energy principle states that the work done on an object is equal to the change in its potential energy:
W = (1/2) * k * x^2
where W is the work done, k is the spring constant, and x is the displacement from the natural length. We found the spring constant k to be 5 N/m, and we are given that the displacement x is 10 m, so:
W = (1/2) * 5 N/m * (10 m)^2
Now, calculate the work done:
W = (1/2) * 5 N/m * 100 m^2 = 250 J
Therefore, the work done in stretching the spring 10 m from its natural length is 250 Joules.

For more such questions on natural length

brainly.com/question/28615861

#SPJ11

The molar mass of nickel (I) chromate is 234 grams per mole.

To determine the molar mass of nickel (I) chromate, we need to first determine the chemical formula of the compound.

Nickel (I) has a +1 oxidation state, while chromate has a -2 charge. Therefore, the chemical formula of nickel (I) chromate is Ni2CrO4.

To calculate the molar mass of Ni2CrO4, we need to find the atomic masses of nickel, chromium, and oxygen, and multiply them by their respective subscripts in the chemical formula. Rounding to the nearest whole number, we get:

Ni: 2 x 59 = 118

Cr: 1 x 52 = 52

O: 4 x 16 = 64

Molar mass of Ni2CrO4 = 118 + 52 + 64 = 234 grams per mole.

Learn more about chromate here:

https://brainly.com/question/31107847

#SPJ1

The most accurate range provided for our spectrum of light that is visible is 380-740 nm. Option c is correct.

The visible spectrum of light refers to the range of electromagnetic radiation that can be detected by the human eye, typically between 380 to 740 nanometers in wavelength. This range is perceived by the human eye as different colors, with violet having the shortest wavelength and red having the longest. The visible spectrum is just a small portion of the electromagnetic spectrum, which includes other forms of radiation such as radio waves, microwaves, X-rays, and gamma rays.

Scientists use various devices to detect and measure the different ranges of the electromagnetic spectrum. Understanding the properties and behaviors of light in different ranges is important in fields such as astronomy, optics, and communications. Hence, option c is correct.

To know more about visible spectrum, here

brainly.com/question/13262930

#SPJ4

Three objects are connected by massless wires over a massless frictionless pulley as shown in the figure. the tension in the wire connecting the 10.0-kg and 15.0-kg objects is measured to be 133 n the mass m in the multiple-object system without friction is approximately 13.1 kg.

To find the mass m in this multiple-object system without friction, follow these steps:
1. Analyze the forces acting on each object. For the 10.0-kg and 15.0-kg objects, the forces are tension (T) and gravitational force (weight).
2. Write the equation of motion for each object using Newton's second law (F = ma). For the 10.0-kg object: T - 10.0g = 10.0a, and for the 15.0-kg object: 15.0g - T = 15.0a.
3. Substitute the given tension (133 N) into the equations: 133 - 10.0g = 10.0a and 15.0g - 133 = 15.0a.
4. Solve one of the equations for acceleration (a). For example, from the first equation: a = (133 - 10.0g) / 10.0.
5. Substitute the expression for acceleration into the other equation, and solve for g (the acceleration due to gravity): 15.0g - 133 = 15.0((133 - 10.0g) / 10.0).
6. Solve for g: g ≈ 9.81 m/s^2.
7. Use the value of g to find the acceleration (a) from step 4: a ≈ 0.57 m/s^2.
8. Now, consider the third object with mass m. The forces acting on it are tension (T) and gravitational force (m*g). Write the equation of motion for this object: T - m*g = m*a.
9. Substitute the given tension (133 N) and the calculated acceleration (0.57 m/s^2) into the equation: 133 - m*9.81 = m*0.57
10. Solve for mass m: m ≈ 13.1 kg.

For more such questions on mass m

brainly.com/question/27266452

#SPJ11