We can use dimensional analysis to solve this problem. First, we need to find the molar mass of argon from the periodic table, which is approximately 39.95 g/mol.
Next, we can set up a conversion factor using Avogadro's number, which is 6.022 x 10^23 atoms/mol.
1 mol Ar = 6.022 x 10^23 atoms Ar
From this conversion factor, we can derive another conversion factor:
1 atom Ar = 1 mol Ar/6.022 x 10^23 atoms Ar
Now we can use these conversion factors to convert atoms of argon to grams of argon:
2.35 x 10^24 atoms Ar * (1 mol Ar/6.022 x 10^23 atoms Ar) * (39.95 g Ar/1 mol Ar)
= 9.39 x 10^2 g Ar
Therefore, there are approximately 939 grams of argon present in 2.35 x 10^24 atoms of argon.
why does f2 have such high standard reduction potential, and why are the standard reduction potentials for alkali metals negative?
The standard reduction potential is a measure of the tendency of a species to gain electrons and undergo reduction. A higher reduction potential means that a species is more likely to undergo reduction.
The high standard reduction potential of F2 can be attributed to its small atomic size and high electronegativity. Fluorine has a strong attraction for electrons due to its high electronegativity, and its small atomic size allows it to tightly hold onto its valence electrons. As a result, F2 has a strong oxidizing power and a high tendency to accept electrons, leading to a high standard reduction potential.
On the other hand, the standard reduction potentials for alkali metals are negative due to their low electronegativity and large atomic size. Alkali metals have a strong tendency to lose their valence electrons due to their low electronegativity and relatively large atomic size, which makes their valence electrons more loosely bound. As a result, they have a low tendency to accept electrons, and their standard reduction potentials are negative.
It is also important to note that standard reduction potentials are measured under standard conditions, which may not reflect the behavior of the species in other environments. Factors such as the presence of other species, the pH, and the temperature can affect the behavior of species and their standard reduction potentials.
Learn more about Alkali metals here:
brainly.com/question/18153051
#SPJ4
A chemical reaction has three reactants: A, B, and C. The reaction rate is given by R = [A][C]. What is the order of the reaction with respect to reactant B?
A) 0
B) 1
C) 2
D) 3
if covalent bonding occurs because an atom wants to achieve an octet and therefore fill empty spaces in its orbital, how many covalent bonds would you think are formed by each of the atoms in
The number of covalent bonds generated by each atom in C, H, O, Cl, N, S, and P is as follows:
Carbon (C) has 4 valence electrons and needs to form 4 covalent bonds to achieve an octet.Hydrogen (H) has 1 valence electron and needs to form 1 covalent bond to achieve a duet.Oxygen (O) has 6 valence electrons and needs to form 2 covalent bonds to achieve an octet.Chlorine (Cl) has 7 valence electrons and needs to form 1 covalent bond to achieve an octet.Nitrogen (N) has 5 valence electrons and needs to form 3 covalent bonds to achieve an octet.Sulfur (S) has 6 valence electrons and needs to form 2 covalent bonds to achieve an octet.Phosphorus (P) has 5 valence electrons and needs to form 3 covalent bonds to achieve an octet.Covalent bonding occurs when atoms share electrons to achieve a more stable electron configuration. In general, elements that are close to each other on the periodic table tend to form covalent bonds, while elements that are far apart tend to form ionic bonds. Atoms can share one, two, or three pairs of electrons to form single, double, or triple covalent bonds, respectively. The number of electrons shared is determined by the number of electrons needed to achieve a stable configuration.
The number of covalent bonds formed by each of the atoms in C, H, O, Cl, N, S, and P depends on the number of valence electrons each atom has and the number of electrons needed to achieve a stable octet. These numbers are based on the octet rule, which states that atoms will bond in such a way as to achieve a stable electron configuration with a full valence shell of 8 electrons (or 2 electrons for hydrogen). Covalent bonding occurs when atoms share electrons to achieve this stable configuration.
The complete question is
If covalent bonding occurs because an atom wants to achieve an octet and therefore fill empty spaces in its orbital, how many covalent bonds would you think are formed by each of the atoms in C, H, O, Cl, N, S, and P?
To know more about the Bonding, here
https://brainly.com/question/26149387
#SPJ4
What 2 characteristics do ferns,club mosses, and horsetails share? How do these characteristics differ from those of mosses?
Ferns, club mosses, and horsetails are all vascular plants that reproduce by producing spores, and they share the following two characteristics:
Vascular tissue: These plants have specialized tissues for conducting water and nutrients throughout the plant. The vascular tissue is composed of xylem, which transports water and minerals from the roots to the rest of the plant, and phloem, which transports organic nutrients (such as sugars) from the leaves to the rest of the plant.
Spore production: These plants reproduce by producing spores, which are haploid (having one set of chromosomes) and can grow into new plants under favorable conditions.
In contrast, mosses are non-vascular plants that lack specialized tissues for conducting water and nutrients. Instead, they absorb water and nutrients directly from their surroundings through their leaves. Mosses also reproduce by producing spores, but they have a much simpler structure than ferns, club mosses, and horsetails. Mosses lack true roots, stems, and leaves, and they do not have a well-developed system for conducting water and nutrients throughout the plant.
To know more about minerals please refer:
https://brainly.com/question/5099156
#SPJ1
how much work (in j ) is involved in a chemical reaction if the volume decreases from 4.10 to 1.12 l against a constant pressure of 0.801 atm ? express your answer to three significant figures and include the appropriate units.
if the volume decreases from 4.10 to 1.12 l against a constant pressure of 0.801 atm Then The work involved is 324.8 J
The change in volume is V₂ - V₁
∆V = 4.1 - 1.12 L
∆V = 2.98
∆V = 2.98 x 10⁻³ m³
∆V = 3 ×10⁻³ m³
The constant pressure is
p = 0.857 atm = 0.857*101325 Pa
p = 86836 Pa
By definition, the work done is
[tex]W = \int\limits pdV = 86836 \frac{N}{m²} * (3 ×10⁻³ m³)[/tex]
In physics, work is the energy transferred to or from an object via the application of force along a displacement. In its simplest form, for a constant force aligned with the direction of motion, the work equals the product of the force strength and the distance traveled. A force is said to do positive work if when applied it has a component in the direction of the displacement of the point of application. A force does negative work if it has a component opposite to the direction of the displacement at the point of application of the force.
Visit here to learn more about the work: https://brainly.com/question/6578814
#SPJ4
2. a substance in the gas state has a density about times less than when it is in the liquid state. the diameter of a molecule is . what is the best estimate of the average distance between molecules in the gas state? a. b. c. d. 1000 d d 10d 100d 1000d
The best estimate for the average distance between gas molecules is therefore b. d, or 1 diameter.
The density of a substance in the gas state is typically much less than its density in the liquid state because the molecules are much farther apart from each other in the gas phase. The average distance between gas molecules can be estimated using the formula:
d =[tex](V / N)^(1/3)[/tex]
where d is the average distance between molecules, V is the volume of the gas, and N is the number of gas molecules.
Since the density of the gas state is about "times less" than that of the liquid state, we can say that the density of the gas state is 1/ times that of the liquid state. This means that the volume of the gas must be times greater than the volume of the liquid, assuming the same number of molecules.
Let's call the diameter of a molecule "diameter" and assume that the substance in question is a monatomic gas (consisting of individual atoms). The volume of one molecule of a monatomic gas is approximately (4/3)π[tex](diameter/2)^3[/tex]. Therefore, the volume of N molecules is N times this volume, or N(4/3)π [tex](diameter/2)^3[/tex].
Since the volume of the gas is times greater than the volume of the liquid, we can say:
N(4/3)π [tex](diameter/2)^3[/tex] = times the volume of the liquid
Solving for N, we get:
N = ( times the volume of the liquid) / (4/3)π[tex](diameter/2)^3[/tex]
Substituting this expression for N into the formula for d, we get:
d = [times the volume of the liquid / (4/3)π [tex](diameter/2)^3]^(1/3)[/tex]
Simplifying this expression, we get:
d = [(3/4) times the volume of the liquid / π [tex](diameter/2)^3]^(1/3)[/tex]
We can see that d is proportional to the cube root of the volume of the liquid and inversely proportional to the cube root of the cube of the diameter of the molecule. Therefore, we can say that:
d ~ V^(1/3) / diameter
Plugging in the values from the answer choices, we find:
a. 1000d: d ~ [tex]V^(1/3)[/tex] / diameter = [tex](1000)^(1/3)[/tex]/ diameter = 10.0 / diameter
b. d: d ~ [tex]V^(1/3)[/tex] / diameter =[tex]1^(1/3)[/tex] / diameter = 1 / diameter
c. 10d: d ~[tex]V^(1/3)[/tex] / diameter = [tex](10)^(1/3)[/tex] / diameter = 2.15 / diameter
d. 100d: d ~ [tex]V^(1/3)[/tex] / diameter = [tex](100)^(1/3)[/tex] / diameter = 4.64 / diameter
e. 1000d: d ~ [tex]V^(1/3)[/tex]/ diameter = [tex](1000)^(1/3)[/tex] / diameter = 10.0 / diameter
The best estimate for the average distance between gas molecules is therefore b. d, or 1 diameter.
Learn more about average distance
https://brainly.com/question/3841552
#SPJ4
A gas occupies 12 L of a container at 2.75 atm. What is the volume of the gas if the pressure becomes 7.25atm?
Boyle's Law-
[tex]\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}\\[/tex]
(Pressure is inversely proportional to the volume)
Where-
[tex]\sf V_1[/tex] = Initial volume[tex]\sf V_2[/tex] = Final volume[tex]\sf P_1[/tex] = Initial pressure[tex]\sf P_2[/tex] = Final pressureAs per question, we are given that -
[tex]\sf V_1[/tex] = 12 mL[tex]\sf P_1[/tex] = 2.75 atm[tex]\sf P_2[/tex] = 7.25 atmNow that we have all the required values and we are asked to find out the final volume, so we can put the values and solve for the final volume -
[tex]\:\:\:\:\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}[/tex]
[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf 2.75 \times 12= 7.25 \times V_2\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \dfrac{2.75 \times 12 }{7.25}\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \cancel{\dfrac{ 33}{7.25}}\\[/tex]
[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf V_2 = 4.5517........\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf \underline{V_2 = 4.56 \:mL }\\[/tex]
Therefore, the volume will become 4.56 mL if the pressure becomes 7.25atm.
The emission of radiation by a sample of fluorine-18 is measured as
64 mCi at 10:30 AM and as 4.0 mCi at 3:30 PM on the same day. The
half-life of fluorine-18 is
F-18 has a biological half-life of about 6 hours and a physical half-life of 1.83 hours, making its active half-life roughly 1.4 hours (7). Fluorine F 18 has a half-life is 109.7 minutes and decays by positron,(+) emission.
What kind of radiation does fluorine-18 emit?Positrons are released by this fluorine radioactive isotope. A radioactive version of glucose that's also easily absorbed by cancer cells as well as normal cells can be created using F-18. Nuclear imaging can be used to locate tumours, map brain activity, and identify other diseases.
What is fluorine-18's isotope composition?A key source of positrons is the fluorine radioisotope fluorine-18 (18F). Its half-life was 109.771(20) minutes, and its mass is 18.0009380(6) u. 96% of the time, it decays via positron emission, and 4% by electron capture.
To know more about positron visit:
https://brainly.com/question/21275312
#SPJ1
which element plays the same role on titan as water does on earth (existing as gas, liquid, and solid)?
Methane (CH₄) plays the same role on Titan as water does on Earth, existing as gas, liquid, and solid.
On Earth, water exists as a gas (water vapor), liquid (water), and solid (ice) due to the planet's temperature and atmospheric pressure conditions. On Titan, the largest moon of Saturn, the role of water is replaced by methane. Methane exists as a gas in Titan's atmosphere, and due to the extremely low temperatures and high atmospheric pressure, it can also exist as a liquid and solid on the moon's surface.
Titan's atmosphere is primarily composed of nitrogen, with small amounts of methane, ethane, and other gases. The presence of methane and other hydrocarbons on Titan has led scientists to speculate about the possibility of life on the moon, although this has yet to be confirmed.
To know more about titan, here
brainly.com/question/31160630
#SPJ4
Convert 8.25 atm to torr?
A 6.0x102-g sample of water at 90.0°C is mixed
with 4.00x102 g of water at 22.0°C. Assume that
there is no heat loss to the surroundings. What is
the final temperature of the mixture?
The mixture's final temperature is 62.8°C.
How much specific heat is 4.184 J?The specific heat of water is 4.184 J/g-K due to the fact that there are 4.184 joules in a calorie. The molar heat capacity of a substance—the amount of heat required to increase the temperature of one mole of the substance by either 1oC or 1K—can also be used to characterise how easily it gains or loses heat.
Q = mcΔT
Q hot = -Q cold
where Q hot is the heat lost by the hot water, and Q cold is the heat gained by the cold water.
Using the equation above, we can write:
m hot * c water * (T final - T hot) = -m cold * c water * (T final - Tcold)
where m hot is the mass of the hot water, m cold is the mass of the cold water, c water is the specific heat capacity of water, T hot is the initial temperature of the hot water, T cold is the initial temperature of the cold water, and T final is the final temperature of the mixture.
Substituting the given values, we get:
(6.0x102 g) * (1 cal/g°C) * (T final - 90.0°C) = -(4.00x102 g) * (1 cal/g°C) * (T final - 22.0°C)
Simplifying and solving for T_final, we get:
T final = (m hot * T hot + m cold * T cold) / (m hot + m cold)
T final = [(6.0x102 g) * (90.0°C) + (4.00x102 g) * (22.0°C)] / (6.0x102 g + 4.00x102 g)
T final = (54000 + 8800) / 1000
T final = 62.8°C
To know more about temperature visit:-
https://brainly.com/question/11050215
#SPJ1
write the condensed structural formula of the organic product for propanoic acid reacting with each of the following: naoh, methanol, water.
The chemical equation for the reaction is as follows:CH3CH2COOH + H2O → CH3CH2COOH + H3O+
When answering a question on Brainly, as a question answering bot, it is important to always be factually accurate, professional, and friendly. Additionally, it is essential to be concise and not provide extraneous amounts of detail.
Any typos or irrelevant parts of the question should be ignored. Below is the condensed structural formula of the organic product for propanoic acid reacting with each of the following:
NaOHSodium hydroxide (NaOH) reacts with propanoic acid (CH3CH2COOH) to give sodium propanoate (CH3CH2COO-Na+). The chemical equation for the reaction is as follows:
CH3CH2COOH + NaOH → CH3CH2COO-Na+ + H2OMethanolWhen propanoic acid reacts with methanol (CH3OH) in the presence of a catalyst, such as sulfuric acid (H2SO4), methyl propanoate (CH3CH2COOCH3) is formed.
The chemical equation for the reaction is as follows:CH3CH2COOH + CH3OH → CH3CH2COOCH3 + H2OWaterWhen propanoic acid reacts with water (H2O), it undergoes hydrolysis to give propanoic acid and hydronium ions (H3O+).
To learn more about : chemical
https://brainly.com/question/29886197
#SPJ11
ccording to the law of conservation of mass, which statement about chemical reactions is always true?
Antoine Lavoisier proposed the Law of Conservation of Mass in 1789.
According to the mass conservation principle, mass in a closed system cannot be created or destroyed, but can only be transformed from one state to another. This means that the system's total mass stays constant over time, regardless of physical or chemical changes within the system.
This law is a fundamental principle in many branches of science, including chemistry and physics, and it has significant consequences for understanding how matter and energy behave in the universe. The idea of energy conservation is closely related to the law of conservation of mass, which says that the total amount of energy in a closed system is also conserved over time.
These laws, taken together, provide a framework for understanding the basic properties of matter and energy, as well as how they interact in the universe.
Learn more about the Law of Conservation of Mass:
https://brainly.com/question/19038178
The complete question :
Describe the Law of Conservation of Mass?
According to the law of conservation of mass, the statement that is always true about chemical reactions is: A) In a chemical reaction, matter is not created or destroyed, but is conserved.
A chemical reaction is the process in which one or more substances change into different substances. The starting substances are called reactants, and the substances that are produced are called products.
What is the law of conservation of mass?The law of conservation of mass states that in a chemical reaction, matter is not created or destroyed, but is conserved. This implies that the mass of the reactants is equal to the mass of the products. This law means that the amount of matter that exists before and after a chemical reaction is the same.
Hence, the correct option for the statement about chemical reactions that is always true according to the law of conservation of mass is A. In a chemical reaction, matter is not created or destroyed, but is conserved.
To know more about law of conservation of mass
brainly.com/question/13383562
#SPJ11
What pressure is required to compress 198 L of air at 2.5atm into a cylinder whose volume is 35 L?
The correct answer is To calculate the pressure required to compress 198 L of air at 2.5 atm into a cylinder whose volume is 35 L, we can use the ideal gas law.
PV = nRT where P is the pressure, V is the volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature in Kelvin. Assuming that the temperature remains constant during compression, we can rearrange the equation to solve for the final pressure: P_final = (nRT) / V_final where V_final is the final volume of the compressed air. First, we need to calculate the initial number of moles of air: n_initial = (P_initial * V_initial) / (RT) where P_initial is the initial pressure, V_initial is the initial volume, and R is the universal gas constant. Since we know the initial volume and pressure, we can plug in the values and solve for n_initial: n_initial = (2.5 atm * 198 L) / (0.0821 L·atm/mol·K * 298 K) n_initial = 20.3 mol Next, we can use the ideal gas law again to calculate the final pressure: P_final = (n_initial * R * T) / V_final where T is the constant temperature in Kelvin. Assuming the temperature is 298 K, and the final volume is 35 L, we can plug in the values and solve for P_final: P_final = (20.3 mol * 0.0821 L·atm/mol·K * 298 K) / 35 L P_final = 3.0 atm Therefore, the pressure required to compress 198 L of air at 2.5 atm into a cylinder whose volume is 35 L is 3.0 atm.
To learn more about gas law click on the link below:
brainly.com/question/27009857
#SPJ1
Pls HELP!! i have to write a summary about this : #1 soil in midwestern US is eroding 10 to 1000 times faster than it forms,study finds...
Answer:
According to recent studies, the first layer of soil in the midwestern United States is being eroded at a rate 10 to 1000 times faster than it is forming. This alarming rate of soil erosion could have significant consequences for agriculture, ecosystems, and even the economy.
Soil erosion can have both direct and indirect effects on human societies. When topsoil is lost, the quality of the remaining soil is reduced, and this can have a significant impact on crop yields. Soil erosion can also contribute to water pollution as runoff carries with it excess nutrients and pesticides from the fields.
Additionally, soil erosion can cause severe damage to ecosystems. When topsoil is lost, the delicate balance of nutrients, microorganisms and other life forms is negatively impacted. This can lead to reduced biodiversity and degradation of the natural landscape.
In light of these findings, it is clear that more needs to be done to address the issue of soil erosion. This could include measures such as greater use of cover crops, conservation tillage practices, and other sustainable farming practices. These measures could help slow down or even stop the erosion of the topsoil.
In conclusion, soil erosion in the midwestern United States should be taken seriously. It is important to understand the causes and effects of soil erosion and to take proactive measures to protect our natural resources. By implementing sustainable farming practices, we can work towards the goal of ensuring that our soil remains productive and healthy for current and future generations.
A flexible container has 50.00l of nitrogen gas has 333k what will
Be the volume of that sample nitrogen
The volume of a gas is directly proportional to its temperature when pressure and moles remain constant. As the temperature increases, the volume of nitrogen gas also increases. Hence, the correct option is (D) i.e. 5.59 L.
To solve this problem, we can use the combined gas law:
(P1V1)/T1 = (P2V2)/T2
where P is pressure, V is volume, and T is temperature. We can assume that the pressure remains constant, as the problem states that the container is flexible.
Given:
V1 = 5.00 L
T1 = 298 K
T2 = 333 K
We need to find V2 of nitorgen.
(P1V1)/T1 = (P2V2)/T2
V2 = (P1V1T2)/(P2T1)
We can assume that the pressure remains constant, so P1 = P2. Therefore, we can simplify the equation to:
V2 = (V1T2)/(T1)
V2 = (5.00 L)(333 K)/(298 K)
V2 = 5.59 L
Therefore, the correct option is (D) 5.59 L.
To know more about nitrogen please refer: https://brainly.com/question/13907528
#SPJ1
vinegar is an aqueous solution of acetic acid, ch3cooh. suppose you titrate a 46.1 ml sample of vinegar with 17.46 ml of a standardized 0.1113 n solution of naoh. what is the normality of acetic acid in this vinegar?
The normality of acetic acid in this vinegar is 0.0422 N.
The balanced chemical equation for the reaction between acetic acid and sodium hydroxide is:
CH₃COOH + NaOH → NaCH₃COO + H₂O
From the equation, we can see that the mole ratio between acetic acid and sodium hydroxide is 1:1. So, the number of moles of NaOH used in the titration can be calculated as,
0.1113 N × 0.01746 L = 0.001944 moles NaOH
Since the mole ratio of acetic acid and NaOH is 1:1, the number of moles of acetic acid present in the 46.1 ml sample of vinegar is also 0.001944 moles.
The normality of acetic acid can be calculated using the formula:
Normality = (number of moles of solute) / (volume of solution in liters)
Normality = 0.001944 moles / 0.0461 L = 0.0422 N
To know more about vinegar, here
brainly.com/question/11530998
#SPJ4
which of the following statements is false? substances with similar intermolecular attractive forces tend to be soluble in one another. the weaker the attraction between the solute and solvent molecules, the greater the solubility. the solubility of a gas increases in direct proportion to its partial pressure above the solution. nonpolar liquids tend to be insoluble in polar liquids.
The solubility of a gas in a liquid is dependent on the partial pressure of the gas above the liquid, as stated in the third statement. However, the second statement is false because the solubility of a solute in a solvent typically increases as the strength of the attractive forces between the solute and solvent molecules increases, not decreases.
The statement "the weaker the attraction between the solute and solvent molecules, the greater the solubility" is false.
Solubility is a measure of how much of a solute can dissolve in a given amount of solvent at a certain temperature and pressure. The solubility of a solute depends on various factors such as the nature of the solute and solvent, temperature, pressure, and the intermolecular forces between them.
Generally, substances with similar intermolecular attractive forces tend to be soluble in one another, as stated in the first statement. Nonpolar liquids tend to be insoluble in polar liquids, as stated in the fourth statement.
Find out more about the solubility of a gas
brainly.com/question/14781271
#SPJ4
If 12L of neon at 23 °C is allowed to expand to 52 L, what must the new temperature be to maintain constant pressure?
Charles's Law-
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]
Where:-
V₁ = Initial volumeT₁ = Initial temperatureV₂ = Final volumeT₂ = Final temperatureAs per question, we are given that -
V₁=12 L T₁ = 23°CV₂ =52 LWe are given the initial in °C.So, we first have to convert the temperature in Celsius to kelvin by adding 273-
[tex]\:\:\:\:\:\:\star\sf T_1[/tex] = 23+ 273 =296K
Now that we have obtained all the required values, so we can put them into the formula and solve for T₂ :-
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{\dfrac{T_2}{V_2}=\dfrac{T_1}{V_1}}\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{T_2=\dfrac{T_1}{V_1} \times V_2}\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=\dfrac{296}{12} \times 52\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=24.66....... \times 52\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=1282.66.........\:K\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=(1282.67 -273)°C\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=1009.66....\:°C\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{T_2=1009.67\:°C}\\[/tex]
Therefore, If 12L of neon at 23 °C is allowed to expand to 52 L then the new temperature will become 1009.67°C or 1282.67K to maintain constant pressure.
which is not a method to reduce the emissions of particulate matter? group of answer choices scrubbers smokestacks fluidized bed combustion fabric filters electrostatic precipitator
Answer: Smokestacks are not a method to reduce the emissions of particulate matter.
Explanation: Smokestacks are the structures that release the emissions into the atmosphere. The other options listed - scrubbers, fluidized bed combustion, fabric filters, and electrostatic precipitators are all methods to reduce particulate matter emission.
The method that is not used to reduce the emissions of particulate matter is "Smokestacks".
Smokestacks are not a method to reduce the emissions of particulate matter. Smokestacks are the exhaust pipes in industries that emit the waste products into the atmosphere. Smokestacks are installed in the factories for the removal of flue gases produced during the combustion process.
Scrubbers, Fluidized bed combustion, Fabric filters, and Electrostatic precipitator are some methods used to reduce the emissions of particulate matter. These are explained below:
Scrubbers are used to eliminate acidic gases ([tex]SO_2[/tex] and NOx) as well as particulate matter from industrial flue gas. When flue gases enter a scrubber, they are exposed to a liquid solution that contains a base. [tex]SO_2[/tex] and NOx gases are neutralized as they pass through this solution, and particulate matter is trapped.
Fluidized bed combustion: In this method, the fuel is burned in a bed of inert particles at a high temperature, resulting in less NOx emissions and the release of less particulate matter into the atmosphere.
Fabric filters are used to filter out fine particles from flue gases by trapping them in woven filter bags. The bags are cleaned regularly to keep them functional.
Electrostatic precipitators use electrical charges to remove particulate matter from flue gases. Particles are ionized by a high-voltage electric field and then collected on oppositely charged plates, resulting in clean flue gas being released into the environment.
To know more about Smokestacks
brainly.com/question/30754998
#SPJ11
according to table 1, what is the concentration of the glucose in the blood from which the diluted sample was taken? a.60 mg/dl b.90 mg/dl c.120 mg/dl d.150 mg/dl
The concentration from which the diluted sample was taken is 150mg/dl. Thus Option D is the correct answer.
Given ,
Here we are using 1/30 ratio of transparent cuvette with respect to the oxygen-acceptor solution that contains the crucial glucose oxidase these are necessary for the solution to work and the concentration to be detected.
The glucose concentration in the diluted sample is
(0.20/0.24) × 60. mg/dl = 5.0 mg/dl
Therefore,
The glucose concentration in blood is 30 × 5.0 mg/dl = 150 mg/dl
The concentration from which the diluted sample was taken is 150mg/dl. Thus Option D is the correct answer.
To learn more about concentration of glucose,
https://brainly.com/question/28850775
#SPJ4
as part of a lab practical, you need to attach labels about chemical models. for the bond between amino acids, you would add a label describing that it is a. a hydrogen bond in nucleic acids. b. an ionic bond in proteins. c. a covalent bond in proteins. d. a covalent bond in carbohydrates. e. an ionic bond in carbohydrates.
For the bond between amino acids, you would add a label describing that it is a covalent bond in proteins.
The bond between amino acids is a covalent bond known as a peptide bond, which forms when the carboxyl group of one amino acid reacts with the amino group of another amino acid. This reaction is called a dehydration reaction, as a water molecule is removed during the formation of the peptide bond.
Proteins are made up of long chains of amino acids joined together by peptide bonds. The sequence of amino acids determines the structure and function of the protein. The peptide bond is the backbone of the protein chain, which is made up of alternating carbon and nitrogen atoms with the attached amino acid side chains.
In contrast to a covalent bond, ionic bonds are formed when two atoms with opposite charges attract each other. In proteins, ionic bonds can form between the side chains of amino acids that have charged groups, such as lysine and arginine, and those with negatively charged groups, such as aspartic acid and glutamic acid. However, these ionic bonds are not involved in the formation of peptide bonds.
Similarly, hydrogen bonds, which are weak electrostatic interactions between a hydrogen atom and a negatively charged atom such as oxygen or nitrogen, are not involved in the formation of peptide bonds. Hydrogen bonds do play a role in stabilizing the structure of proteins, but they are not the primary type of bond involved in protein structure.
In carbohydrates, covalent bonds known as glycosidic bonds join monosaccharides (simple sugars) together to form polysaccharides (complex sugars), such as starch and cellulose. These covalent bonds are similar to peptide bonds in proteins in that they involve the loss of a water molecule during formation.
Therefore, the correct answer to the lab practical question is c. a covalent bond in proteins.
To know more about covalent bond, visit the link given below;
https://brainly.com/question/10777799
#SPJ4
a 25.0 ml sample of a saturated c a ( o h ) 2 solution is titrated with 0.030 m h c l , and the equivalence point is reached after 38.1 ml of titrant are dispensed. based on this data, what is the concentration (m) of the hydroxide ion?
For a sample of saturated Ca(OH)₂, solution is titrated with 0.030 M HCl. The concentration (m) of the hydroxide ion is equals to the 0.04571 M.
We have a sample of a saturated Ca(OH)₂, solution is titrated with HCl. The balanced chemical reaction is written as
2HCl + Ca(OH)₂--> CaCl₂ + 2H₂O
or 2H⁺ + OH⁻ --> H₂O
that is two moles of HCl are needed in one mol of calcium hydroxide. Now,
Volume of Ca(OH)₂ = 25.0 mL
Molarity of HCl = 0.030
Volume of titrant (HCl) = 38.1 mL. Let the concentration of Ca(OH)₂ and HCl be C₁ and C₂. As we know that, in many cases concentration is considered as molarity ( mol/L). So, concentration of Ca(OH)₂ solution, C₁ = 0.030 mol/L. Equating H⁺ ions and hydroxide (OH⁻) ions, C₁ × V₁ ( Ca(OH)₂) = C₂ × V₂ (HCl)
Here, V₁ = 25 mL, V₂ = 38.1 mL
=> C₁ ×25 mL = 0.03 mol/L × 38.1 mL
=> C₁ = 0.04571 M
Then, concentration of OH⁻ ion is 0.04571 M. For, concentration of Ca(OH)₂ = 0.5× [OH⁻] = 0.5×0.04571 (mol = 1/2)
= 0.02285 M
Hence, concentration of both OH⁻ and Ca(OH)₂ are 0.04571 M and 0.02285 M.
For more information about concentration, visit :
https://brainly.com/question/30653246
#SPJ4
Which of the following statements about thermodynamic systems and state functions is CORRECT?
A thermodynamic state function is a value that is independent of a route. As a result, functions like as pressure, volume, and temperature are determined only by the state of a system and not by the path.
Which of the following are the four thermodynamic functions?A thermodynamic potential, also known as a basic function, is a quantity used to indicate a system's state. Internal energy U, enthalpy H, Helmholtz free energy F, and Gibbs free energy G are our four fundamental functions.
State functions or point functions are properties whose value does not depend on the path followed to obtain that value. Path functions, on the other hand, are those functions that do depend on the path between two places.
learn more about thermodynamic state
https://brainly.com/question/26035962
#SPJ1
a solid is decomposed in hcl, producing a gas. the product gas took 1.63 times as long to effuse as the same amount of co2 under the same conditions of temperature and pressure. what is the molar mass of the product gas? answer in units of g/mol.
According to Graham's law of effusion, the rate of effusion of a gas is inversely proportional to the square root of its molar mass. That is:
rate of effusion ∝ 1/√M
where M is the molar mass of the gas.
Let's assume that the molar mass of CO2 is M1 and the molar mass of the product gas is M2. We can express the ratio of their effusion rates as:
M2/M1 = (rate of effusion of CO2) / (rate of effusion of the product gas)
M2/M1 = (1/1.63)^2 (since the product gas took 1.63 times as long to effuse as CO2)
M2/M1 = 0.376
We know that the molar mass of CO2 is 44 g/mol. Therefore, we can solve for the molar mass of the product gas:
M2 = M1 x 0.376
M2 = 44 g/mol x 0.376
M2 = 16.544 g/mol
So the molar mass of the product gas is approximately 16.5 g/mol.
To know more about gas click here
brainly.com/question/14812509
#SPJ4
a chemist dissolves of pure perchloric acid in enough water to make up of solution. calculate the ph of the solution. be sure your answer has the correct number of significant digits.
The pH of the solution is 2.46. It is important to note that the answer should have the correct number of significant digits, which in this case is three.
To calculate the pH of the solution, we need to first determine the concentration of the solution.
Concentration (M) = moles of solute (n) / volume of solution (V)Concentration of solution = 0.2500 mol / 2.500 L
= 0.100 M
Now that we have the concentration, we can calculate the pH of the solution by using the pH formula:
pH = -log [H+]
The concentration of H+ in the solution can be calculated using the ionization constant of perchloric acid.
Ka = [H+][ClO4-]/[HClO4]1.2 x 10^-2
= [H+]^2/[0.100 M]
Therefore, [H+] = 0.00347 M
Now we can substitute this value into the pH formula:
pH = -log (0.00347)
= 2.46
To learn more about: pH
https://brainly.com/question/12609985
#SPJ11
What is an isolated system?
Answer: An isolated system is a thermodynamic system that cannot exchange either energy or matter outside the boundaries of the system.
Explanation:
there are several models of the carbon cycle. which model shows the causes and amounts of carbon flux into and out of the cycle?
Answer:
The "global carbon budget" model shows the causes and amounts of carbon flux into and out of the carbon cycle.
write the balanced equation and use a correct mole ratio to calculate how many milliliters of 0.01154 m hcl are required to titrate 20.00 ml of 0.0125m ca(oh)2?
The balanced equation is written as
2HCl + Ca(OH)₂ --> CaCl₂+ 2H₂O. From using the mole ratio, the volume of 0.01154 M HCl needed to titrate 20.00 mL of 0.0125 M Ca(OH)₂ is equals to 43.3 mL.
Mole ratio is defined as a ratio between the number of moles of any two components in a balanced chemical reaction/equation. We have, two components Hydrochloric acid, HCl and calcium hydroxide, Ca(OH)₂ for reaction.
Volume of calcium hydroxide solution
V₁ = 20.00 mL = 0.020 L
Molarity of HCl, M₂ = 0.01154 M
Molarity of Ca(oh)₂, M₁ = 0.0125 M
Chemical reaction/equation for components,HCl + Ca(OH)₂-->CaCl₂+ H₂O
Balanced equation is written as
2HCl + Ca(OH)₂ --> CaCl₂+ 2H₂O
Now, mole ratio of HCl to Ca(OH)₂ is 2:1 that is moles of HCl are two times the mol of Ca(OH)₂ to form the respective products. Let V be the needed volume of hydrochloric acid to titrate Ca(OH)₂ solution. Using the molarity formula, Molarity of Ca(OH)₂ = moles of Ca(OH)₂/volume of Ca(OH)₂
=> 0.0125 mol/L = moles of Ca(OH)₂/0.02
=> moles of Ca(OH)₂ = 0.00025 moles
From mole ratio, moles of HCl are required to neutralize, Ca(OH)₂= 0.00025 moles Ca(OH)₂ (2 moles HCl/1 mole Ca(OH)₂ = 0.0005 moles
Now, using molarity formula for HCl,
M₂ = moles of HCl/Volume of HCl
=> 0.01154 Mol/L = 0.0005 moles/V
=> V = 0.0433 L = 43.3 mL ( 1L = 1000 mL).
Hence, required value of volume is 43.3 mL.
For more information about mole ratio, visit :
https://brainly.com/question/30632038
#SPJ4
once a system is at a state of equilibrium, a shift from equilibrium may result by alteration of which of the following? opressure o composition o temperature all of the above
A shift from equilibrium can result by alteration of any of the following: pressure, composition, or temperature. Option d is correct.
When a system is at equilibrium, it means that the rates of the forward and reverse reactions are equal and there is no net change in the concentrations of the reactants and products. However, if any of the conditions that affect the equilibrium are altered, such as the pressure, composition, or temperature, the equilibrium may shift to a new state.
For example, increasing the pressure may shift the equilibrium to favor the side with fewer moles of gas, while increasing the temperature may favor the endothermic or exothermic reaction depending on the direction of heat flow. Similarly, changing the composition by adding or removing reactants or products can also affect the equilibrium position. These changes in the equilibrium can be predicted and analyzed using the principles of chemical equilibrium. Hence option d is correct choice.
To know more about equilibrium, here
brainly.com/question/29738952
#SPJ4