Use the periodic table above to determine which of the following elements has 4 valence electrons as a neutral atom. (1 pt)
*
1 point
Magnesium (Mg, #12)
Lithium (Li, #3)
Silicon (Si, #14)
Sulfur (S, #16)

One chemical that could be used for the neutralization of HCl is sodium hydroxide.

Neutralization is a reaction that occurs between an acid and a base to yield salt and water only. In this type of reaction the acid is rendered less harmful than it was when it poured on the bench.

One chemical that could be used for the neutralization of HCl is sodium hydroxide. It must be know that a base has to be used for the neutralization and it has to be a strong base such as sodium hydroxide.

Learn more about neutralization:https://brainly.com/question/27891712

#SPJ1

The increasing order of basicity, putting least basic nitrogen atom first are as follow:

N2 < N1 < N3.

The basicity of the atom is inversely proportional to the resonance.

Resonance is also termed as mesomerism, is defined as a way of telling the bonding in certain polyatomic ions or molecules by the combination of varies contributing structures into the resonance hybrid in the valence bond theory.

Since, in N2 due to the presence of lone pair of electron and it not even donate these lone pair of electron. On the other hand they take part in resonance, therefore the basicity of the N2 is least.

In N3 the lone pair of electron is present and it able to donate these lone pair of electron to the sp3 hybridization, therefore the basicity of the N3 is more than N2.

Thus, we concluded that increasing order of basicity, putting least basic nitrogen atom first are N2 < N1 < N3.

learn more about basicity:

https://brainly.com/question/15344589

#SPJ4

The procedure that cannot be performed on a hot plate, requiring a bunsen burner instead include A. Heating a crucible to remove water from a hydrate.

The procedure that can be performed on a hot plate are:

a. Heating a solvent to help a solute dissolve.

b. Heating an isolated solid to dry it.

c. Heating water to boiling for a water bath.

It should be emphasized that heating a crucible in order to extract water from a hydrate cannot be done using a hot plate. Anyone should avoid heating any ceramic or silica items on a hot plate.

The ideal solution is to heat a crucible to extract the water from a hydrate.

Learn more about hot plate on:

https://brainly.com/question/17436467

#SPJ1

The amount made from removing 68.1 kilograms of old copper tubing is $375.34.

The amount made from removing 68.1 kilograms of old copper tubing is calculated as follows;

A = mass x cost per mass

mass = 68.1 kg = 150.1348 lb

Amount = $2.5/lb x 150.1348 lb

Amount =  $375.34

Thus, the amount made from removing 68.1 kilograms of old copper tubing is $375.34.

Learn more about amount of money here: https://brainly.com/question/24373500

#SPJ1

When the force become stronger, the acceleration becomes larger and the velocity changes by a wider margin.

We know that the force is that which makes motion to occur. In other words, an object would continue in its state of rest or uniform motion unless it is acted upon by an external force.

We know that the stronger the force the greater the acceleration since force is directly proportional to the acceleration of a body. Given this statement, it is important to also know that acceleration is the change of velocity with time.

When the force become stronger, the acceleration becomes larger and the velocity changes by a wider margin.

Learn more about force:https://brainly.com/question/13191643

#SPJ1

Answer:

There are 1.0 * 10^9 seconds in 32 years.

Explanation:

To solve this problem, we will use dimensional analysis, or multiplying by fractions equivalent to 1.

We are starting with a value in years. Since we know that there are 365 days in 1 year, we can multiply the given value (in years) by 365 days/1 year to cancel out the units of years and convert to days:

32 years * 365 days/1 year = 11,680 days

Next, we can use the same idea to convert from days to hours:

11,680 days * 24 hours/1 day = 280,320 hours

And then again for hours to minutes and minutes to seconds:

280,320 hours * 60 minutes/1 hour * 60 seconds/1 minute

= 1009152000 seconds

This answer is quite large, so we will convert to scientific notation to make the value more manageable.

1009152000 seconds = 1.0 * 10^9 seconds

Therefore your answer is 1.0 * 10^9 seconds.

Check out the questions linked below for more information about dimensional analysis:

https://brainly.com/question/28568376

https://brainly.com/question/24379122

Answer:

element

Explanation:

its the only substance type of antom called the element so yeah

129 pounds of gasoline will it hold if the gasoline has a density of 0.737 g/ml.

Stoichiometry helps us use the balanced chemical equation to measures quantitative relationships and it is to calculate the amount of products and reactants that are given in a reaction.

Density is defined as mass per unit volume. S.I unit if density is kg/m³.

It is expressed as

Density = [tex]\frac{\text{Mass}}{\text{Volume}}[/tex]  or [tex]d = \frac{m}{V}[/tex]

Now,

= [tex]21.0\ \text{gallon} \times \frac{3.785\ L}{1\text{gallon}} \times \frac{1000\ mL}{1\ L} \times \frac{0.737\ g}{1\ mL} \times \frac{1\ kg}{1000\ g} \times \frac{2.2046\ \text{pounds}}{1\ kg}[/tex]

= [tex]\frac{21.0 \times 3.785 \times 1000 \times 0.737 \times 2.2046}{1 \times 1 \times 1000 \times 1}\ \text{pounds}[/tex]

= 129 pounds.

Thus from the above conclusion we can say that 129 pounds of gasoline will it hold if the gasoline has a density of 0.737 g/ml.

Learn more about Density here: https://brainly.com/question/1354972

#SPJ4

The total number of atoms present in the carbon

atom ¹³C is 2.32 × 10²³ atoms. And the number of electrons present in 2.32 × 10²³ is 1.392 × 10²⁴ electrons.

Carbon is a non-metallic element. It is the element of group 14 of the periodic table. It is tetravalent. It is presented by the symbol 'C'. The atomic number of carbon is 6. And the atomic mass of carbon is 12.011 u. Carbon has four valence electrons.

Total number of atoms present in the carbon atom

[tex] ^{13} C = 2.32 \times 10^{23} \: atoms[/tex]

Total number of electrons present in the carbon atom

[tex] ^{13} C = 1.39 \times 10 ^{24} \: electrons[/tex]

The atomic number of carbon atom

[tex] ^{13} _{6}C = 6[/tex]

The number of electrons present in carbon is,

The atomic number of carbon = the number of electrons

Atomic number = 6

Number of electrons = 6

[tex]The \: number \: of \: electrons \: present \: [/tex]

[tex]in \:2.32 \times 10^{23} \: atoms \: of \: carbon,[/tex]

= Number of electrons present in one carbon atom ×

[tex]2.32 \times 10 ^{23} [/tex]

[tex] = 6 \times 2.32 \times 10 ^{23} [/tex]

[tex] = 1.392 \times 10 ^{24} [/tex]

Therefore, the total number of atoms present in the carbon atom ¹³C is 2.32 × 10²³ atoms. And the number of electrons present in 2.32 × 10²³ is 1.392 × 10²⁴ electrons.

To know more about carbon, refer to the below link:

https://brainly.com/question/13719781

#SPJ4

Answer:

main sequence

Explanation:

now nae nae

The sun, like 80 to 90 percent of stars, is in main sequence stage of life.

The main sequence stars fuse hydrogen atoms to form helium atoms in their cores.

The main sequence is a band of stars that appears on plots of the Hertzsprung–Russell diagram

The Hertzsprung–Russell diagram puts each star on a graph according the star's brightness against its temperature.

About 90 percent of the stars in the universe are main sequence stars.

Nuclear reaction is in the inner core of the Sun and hydrogen is conveted into helium.

The inner core is the central region of the Sun and all solar energy is produced in the core by nuclear fusion.

More about main sequence: brainly.com/question/27242930

#SPJ4

Answer: 1 spoon

Explanation:

Amount needed= 5 grams or 5000 mg

The spoon holds 5000 gm

So, One spoon of baking soda is needed for the experiment.

The mass of Fe2O3 is 8.839 x 10^-14 g

The first step is to determine the number of moles of Iron (III) Oxide that contains a billion O atoms.

1 x 10^9 O atoms*1 mol O/6.022 x 10^23 atoms*1 mol Fe2O3/3 mol O = 5.535 x 10^-16 mol Fe2O3

By using the molar mass of Iron (III) Oxide, we arrive with the mass in grams that contains a billion O atoms.

5.535 x 10^-16 mol Fe2O3*159.69 gram/1 mol Fe2O3

= 8.839 x 10^-14 g Fe2O3

Hence, mass of Fe2O3 is 8.839 x 10^-14 g

Learn more about Mass here:

https://brainly.com/question/26150306

#SPJ4

After 24 days, you will have 1/2 kg

It's a common occurrence for radioactive isotopes to spontaneously decay over time, shedding their radioactive atoms. The period of time it takes for any sample of an element to be reduced to half its initial amount is known as the half-life of a radioactive isotope. The differential equation

dNdt=kN(t)

describes the decay of such radioactive isotopes, where N(t) is the number of radioactive atoms of the element that are still present at time t and k is the decay constant.

The solution to the aforementioned differential equation is N(t) = N (0)ekt, where N (0) is the initial sample's initial number of atoms.

Keep in mind that the natural logarithm has the identity

a ln n=a ln n.

Learn more about radioactive here-

https://brainly.com/question/1770619

#SPJ9

Answer:

3. J.J. Thomson & electron

4. b) nucleus

5. neutrons & protons

6. electrons

Answer:

Explanation:

P.S - Get a good lighting when taking the pictures because you kinda gave me a hard time reading the questions. Thank you.

Cells from the air would have fallen into the sterilized growth medium in the flask and grown there if Pasteur had broken off the swan neck of the flask one week after boiling the nutrient broth to sterilize the flask.

He was referred to as a microbiologist who was responsible for many advances in science through experiments and an example is the one which was done using broth.

He heated the flask after it was sealed to kill microbes present in it and the result was nothing grew in the sample. However, if he had broken off the swan neck of the flask one week after boiling, cells from the air would have fallen into the sterilized growth medium in the flask and grown there.

Read more about Pasteur here https://brainly.com/question/11137072

#SPJ1

The equilibrium constant is the ratio of the reactants to the products which is 2.

The equilibrium constant shows the extent to which the reactants are converted into products. The equation of this reaction could be written from the number of molecules of the reactants.

Let the reactants be A and B and the product C, the reaction equation thus becomes;

The equilibrium constant is the ratio of the reactants to the products which is 2.

Learn more about equilibrium constant:https://brainly.com/question/10038290

#SPJ1

The required amount of the dihydrate in the question is 71g of the dihydrate.

We know that a compound could have a water of crystallization. This water of crystallization is attached to the molecule of the compound and is involved when we are calculating the molar mass of the compound.

Now we have the mass  of the anhydrous compound that is required as 65 g.

Molar mass of the anhydrous compound = 391 g/mol

Molar mass of the dihydrate 427 g/mol

Given that;

Number of moles of hydrated compound = Number of moles of anhydrous compound

x/427 = 65/391

x = 65/391 * 427

x = 71 g

Thus, we would require 71g of the dihydrate.

Learn more about dihydrate:https://brainly.com/question/1601699

#SPJ1

Answer:43.12 KG = 43,120 grams

Explanation:1 kilogram is equal to 1,000 grams.

Answer:

43120 g

Explanation:

1 kg = 1000 g

43.12 = 1000(43.12) g

1000(43.12) = 43120

The unit is g because we are converting to grams, and the abbreviation for grams is g.

∴ 43.12 kg = 43120 g

The amount of water that should be added to 28 ml of 15​% alcohol solution to reduce the concentration to ​14% is: 2 ml

To solve this problem, the formula and the procedure that we have to use is:

c1 * v1 = c2 * v2

Where:

Information about the problem:

Applying the dissolution of concentrations formula and clearing the volume of the diluted solution (v2) we get:

c1 * v1 = c2 * v2

v2 = (c1 * v1)/ c2

v2 = (15% * 28 ml)/ 14%

v2= 30 ml

In order to know how much water should be added we have to subtract 28 ml from the volume of the diluted solution:

amount of water should be added = v2 - v1

amount of water should be added = 30 ml - 28 ml

amount of water should be added = 2 ml

In chemistry a solution is known as a homogeneous mixture of two or more components called:

Learn more about chemical solution at: brainly.com/question/13182946

#SPJ4

K₂CO₃ has three element and name of element is potassium, carbon, oxygen and total number of atom is six and the three atom is of oxygen

K₂CO₃ is an inorganic compound with chemical name potassium carbonate and it is also called carbonate of potash, or dipotassium carbonate or Pearl ash and it is a dipotassium salt of carbonic acid and it is widely used in the production of glass and soap

Here given compound is K₂CO₃ which has three element and name of element is potassium, carbon, oxygen and total number of atom is six means 2 potassium one carbon and three oxygen atom and the three atom is of oxygen and subscript and coefficient means number of element which is present in the compound

Know more about K₂CO₃

https://brainly.com/question/26322576

#SPJ1

The average density measured by each group, and the percentage error in each average is 0.88 % , 1.18 % , - 1.77% .

Group 1 :

= d (trial 1 +2+3) / 3

= 12.7 + 11.32 + 10.3 / 3

= 11.4 g/ml

% error = [(E.V - T.V) / T.V ] x 100

  = [( 11.4 - 11.3 ) /11.3 ] x 100

  = 0.88 %

Group 2 :

d = A.J + 11.4 + 11.4/3

   = 11.43 g/ml

% error = 11.433 - 11.3 / 11.3 x 100

    = 1.18 %

Group 3 :

d = 10.9 + 11.3 + 11.1 / 3

  = 11.10 g/ml

% error = 11.10 - 11.3 / 11.3 x 100

   = - 1.77%

To know more about density visit :

https://brainly.com/question/15164682

#SPJ4

I understand the question you are looking for :

handbook lists the density of lead as 11.3 gmL, Several groups of students are attempting to determine the density of a lead weight by various methods. Calculate the average density measured by each group. and the percentage error in each average. Measured densities (g/mL) Group [ Group 2 Group 3 Trial 12.7 113 10.9 Trial 2 11.2 114 11.3 Trial 3 10.3 114 11.1 average density of group 1: glmL percent error of group average density of group 2: glmL percent error of group 2: average density of group 3: glmL percent error of group 3: Which group was most accurate? Which group was most precise? group group 2 group group 3 group 3 group

A substance is held in an open container its particles move fast one another at random speeds but do not leave the container then When enough heat is removed, the particles no longer have enough speed to overcome the weak attractive forces between them

When more gas particles enter a container, there is less space for the particles to spread out, and they become compressed and the particles exert more force on the interior volume of the container and this force is called pressure and in gases the particles move rapidly in all directions, frequently colliding with each other and the side of the container with an increase in temperature, the particles gain kinetic energy and move faster and that's why in the open container particles moves fast one another and when enough heat is removed then the particles no longer have enough speed to overcome the weak attractive forces between them

Know more about particles

https://brainly.com/question/1870038

#SPJ1

Answer: One

Explanation: All elements have just one proton and one neutron

Answer:  KE: 3.43 J

Explanation:

Kinetic energy is represented by the equation [tex]\frac{1}{2}[/tex]m[tex]v^{2}[/tex], with 'm' representing mass and 'v' representing velocity.  In this problem, the mass is 3.5 kg, and the velocity is 1.4m/s. Once you do the math, you get:

KE: 3.43 J

Note: J represents joules, the unit of measure used when writing the number for kinetic energy, as well as other things.

volume of carbon dioxide is produced in the first minute 0.56 L of CO₂

Salt, carbon dioxide, and water are produced when metal carbonate and an acid react. In order to create calcium chloride (CaCl2), carbon dioxide (CO2), and water, calcium carbonate (CaCO3) combines with hydrochloric acid (HCl) (H2O). We are aware that 22.4 L is the volume occupied by 1 mole of any gas at 0° C and 1 atm pressure.

Thus, 100 g of CaCO₃ produces 22.4 L of CO₂

So, 2.5 g CaCO₃ will form, which equals 100.

56 L of CO (2.5*22.4/100)

= 0.56 L of CO₂

Learn more about carbon dioxide here-

https://brainly.com/question/3049557

#SPJ9

​

Answer:All have Chemical and Physical properties

Explanation:

Answer: https://homework.study.com/explanation/if-the-pk-a-values-for-phosphoric-acid-are-2-15-6-82-and-12-38-at-what-ph-would-one-observe-equal-amounts-of-h-2-po-4-and-hpo-4-2.html

Explanation:

website to the answer lol