The amount of energy absorbed by the water is 58,576J. The answer is 4) 58,576J.
The formula to calculate the amount of energy absorbed by the water is:
Q = m x c x ΔT
Where Q is the amount of energy absorbed (in Joules), m is the mass of water (in grams), c is the specific heat capacity of water (in J/g℃), and ΔT is the change in temperature (in ℃).
Substituting the given values, we get:
Q = 200g x 4.184 J/g℃ x (100℃ - 30℃)
Q = 200g x 4.184 J/g℃ x 70℃
Q = 58,576J
Therefore, the amount of energy absorbed by the water is 58,576J. The answer is 4) 58,576J.
To learn more about heat, refer below:
https://brainly.com/question/1429452
#SPJ11
For its size, the common flea is one of the most accomplished jumpers in the animal world. a 2.30-mm-long, 0.490 mg flea can reach a height of 18.0 cm in a single leap.
For its size, the common flea is one of the most accomplished jumpers in the animal world. a 2.30-mm-long, 0.490 mg flea can reach a height of 18.0 cm in a single leap.
a) To calculate the kinetic energy per kilogram of mass of the flea, we can use the formula
KE/kg = KE / m
Where KE is the kinetic energy of the flea and m is its mass in kilograms.
First, we need to convert the mass of the flea from milligrams to kilograms
m = 0.460 mg / 1000 = 0.00046 kg
Next, we can use the equation for gravitational potential energy
PE = m * g * h
Where g is the acceleration due to gravity (9.81 m/s^2) and h is the height the flea jumped (0.15 m).
Therefore, the potential energy of the flea is
PE = 0.00046 kg * 9.81 m/s^2 * 0.15 m = 0.00068 J
The kinetic energy of the flea just before takeoff would be equal to its potential energy, assuming that all of its energy was converted from potential energy to kinetic energy during the jump. Therefore:
KE = 0.00068 J
Finally, we can calculate the kinetic energy per kilogram of mass
KE/kg = KE / m = 0.00068 J / 0.00046 kg = 1.48 J/kg.
b) To find out how high the 79.0 kg, 2.00-m-tall human could jump if they could jump to the same height compared with their length as the flea jumps compared with its length, we can use the equation
Height = body length x 60
Where body length is the length of the body from the feet to the top of the head.
Assuming an average body proportion, we can estimate the body length of the human to be about 1.7 meters.
Therefore, the height the human could jump would be
height = 1.7 m x 60 = 102 m.
However, it is important to note that this calculation is purely theoretical and does not take into account the many physiological and biomechanical limitations that would make such a jump impossible for a human.
The given question is incomplete and the complete question is '' For its size, the common flea is one of the most accomplished jumpers in the animal world. A 2.50-mm-long, 0.460 mg flea can reach a height of 15.0 cm in a single leap. a) Calculate the kinetic energy per kilogram of mass. b) If a 79.0 kg, 2.00-m-tall human could jump to the same height compared with his length as the flea jumps compared with its length, how high could the human jump''.
To know more about common flea here
https://brainly.com/question/15393026
#SPJ4
Electrons got ejected out as if they were ping pong balls by the light particle (photon). Electrons were not moving initially. Then, it was moving later because of the light.
a. What is the momentum of the electron initially (p=mv) Hint: Is it moving initially?
b. Does the electron have momentum after being hit by the light particle? Hint: is it moving after being hit?
c. What can you infer about light particles in momentum? Hint: where is the electron getting its velocity from?
Electron initially had zero momentum. After colliding with a photon, it gained momentum due to the transfer of momentum. This demonstrates the wave-particle duality of light.
a. Yes, the electron has momentum after being hit by the light particle. This is because momentum is defined as the product of mass and velocity, and even though electrons are very small in mass, they still have mass and can therefore have momentum. In this case, the photon (light particle) transferred some of its momentum to the electron, causing it to move.
b. Yes, the electron has momentum and is moving after being hit by the light particle. As mentioned in the previous paragraph, the photon transferred some of its momentum to the electron, causing it to move.
c. Based on the fact that the electron received its velocity from the photon, we can infer that light particles also have momentum. In fact, it was later discovered that photons have both momentum and energy, even though they have no mass. This is because photons are made up of electromagnetic waves, which have both electric and magnetic fields that can transfer energy and momentum.
So, when a photon hits an electron, it can transfer some of its momentum to the electron and cause it to move. This concept is known as the wave-particle duality of light, where light can behave as both a wave and a particle.
Know more about momentum click here:
https://brainly.com/question/24030570
#SPJ11
Question 6
Two ropes are attached to a tree, and forces of F₁ =2.01 +4.03 N and F₂=3.01+6.01 N
are applied. The forces are coplanar (in the same plane). Find the magnitude of the
net force.
15 N
The net force has a magnitude of C, 5.0 N.
How to determine magnitude?To find the net force, add the two forces vectorially. Break down each force into its x and y components:
F₁ = (2.01 N)î + (4.03 N)ĵ
F₂ = (3.01 N)î + (6.01 N)ĵ
To find the net force, add the components:
F_net = F₁ + F₂ = (2.01 N + 3.01 N)î + (4.03 N + 6.01 N)ĵ
F_net = 5.02î + 10.04ĵ
The magnitude of the net force is given by:
|F_net| = √((5.02 N)² + (10.04 N)²)
|F_net| = √(25.2004 N²)
|F_net| = 5.02 N (rounded to two decimal places)
Therefore, the magnitude of the net force is 5.0 N.
Find out more on coplanar forces here: https://brainly.com/question/28245655
#SPJ1
Two balloons are separated by a distance of 25. 5 cm. One balloon is charged with a charge of + 6. 25 nC = + 6. 25 x 10-9 C and the other balloon is charges with a charge of - 3. 5 nC = - 3. 5 x 10-9 C. Calculate the magnitude of Coulombic Force between them. Explain what kind of coulombic force will exist between them (attractive or repulsive)?
The magnitude of Coulombic force between the two balloons is [tex]3.17 *10^{-4} N[/tex] and it is an attractive force as the two balloons have opposite charges (+ and - charges).
The Coulombic force between the two charged balloons can be calculated using Coulomb's law:
[tex]F = k * (q1 * q2) / r^2[/tex]
where F is the force, k is the Coulomb constant [tex](9 * 10^9 N*m^2/C^2)[/tex], q1 and q2 are the charges of the two balloons, and r is the distance between them.
Substituting the given values, we get:
F =[tex]9 * 10^9 * [(+6.25 * 10^{-9}) * (-3.5 * 10^{-9})] / (0.255)^2[/tex]
F = [tex]-3.17 *10^{-4} N[/tex] (negative sign indicates an attractive force)
To know more about Coulomb's law refer here
https://brainly.com/question/506926#
#SPJ11
The stress on a wire that support a load depend on?
The stress on a wire that supports a load depends on the weight of the load and the cross-sectional area of the wire.
The stress is defined as the amount of force per unit area, so a larger load or a smaller wire cross-sectional area will result in a higher stress on the wire.
In addition to these factors, the material properties of the wire are also important in determining the stress. Different materials have different strengths and may behave differently under stress.
For example, a wire made of a brittle material may fail suddenly under stress, while a wire made of a ductile material may bend or deform before breaking.
To know more about ductile material, refer here:
https://brainly.com/question/12975499#
#SPJ11
Leilani Hendricks
4/4/23
Test Name: T-Science-Gr5-T5-PBT (2022-2023)
Test ID: 2710825
1. Sophia rides her bike to and from school. Sophia's bike has a special tape that reflects energy from
the sun to make it easier for cars to see her. She also uses a bell to let other bikers know if she is going
to move pass them. Which of the following form of energy does Sophia not use when biking?
A. mechanical energy
B. sound energy
C. light energy
D. electrical energy
D. Electrical energy. Sophia does not use electrical energy when biking. The special tape on her bike reflects light energy from the sun to make it easier for cars to see her.
What is Light Energy?
Light energy is a form of electromagnetic radiation that travels through space as waves, and can be perceived by the human eye as colors of the visible spectrum. Light energy can also exist as particles called photons. Light energy is able to travel through transparent or translucent substances, such as air, water, and glass. Light energy plays a crucial role in many natural processes, such as photosynthesis, vision, and the heating of the Earth's atmosphere. It is also widely used by humans in applications such as lighting, telecommunications, and photography.
She uses a bell, which creates sound energy, to let other bikers know if she is going to move past them. The mechanical energy is used by Sophia to pedal the bike and move it forward.
Learn more about Light Energy from the given link
https://brainly.com/question/21288390
#SPJ9
In a coal plant, the coal is burned, converting its _____________________ into ___________________. the energy is then transferred from the burner to a boiler full of water. as the boiler turns the water into steam, it is converted into _________________________ which is used to turn the turbine. as the turbine turns the generator's magnets inside a wire, its _______________________ is converted into ______________________.
In a coal plant, the coal is burned, converting its chemical energy into thermal energy. This thermal energy is then transferred from the burner to a boiler full of water.
As the boiler turns the water into steam, it is converted into kinetic energy which is used to turn the turbine. As the turbine turns, the generator's magnets inside a wire, its kinetic energy is converted into electrical energy.
Coal is one of the most widely used fossil fuels for electricity generation. However, burning coal releases harmful pollutants into the atmosphere, including carbon dioxide, sulfur dioxide,
and nitrogen oxides. These emissions contribute to global warming, acid rain, and respiratory diseases.
To address these concerns, many coal plants have implemented technologies such as scrubbers, which remove harmful pollutants from the emissions before they are released into the atmosphere.
Additionally, some coal plants are transitioning to cleaner energy sources such as natural gas, wind, and solar power.
Overall, while coal-fired power plants have played a significant role in powering modern society, their impact on the environment has led to a push for cleaner and more sustainable forms of energy.
To know more about thermal energy refer here
https://brainly.com/question/18989562#
#SPJ11
(a) (i) The work function of caesium is 3.0 x 10-19 J. Explain what this
statement means.
(ii)
[1]
Calculate the frequency of radiation needed to eject electrons of
maximum kinetic energy 6.0 x 10-19 J from a caesium surface. [2]
The work function of caesium being 3.0 x 10^-19 J means that to remove an electron from the surface of caesium, at least 3.0 x 10^-19 J of energy must be supplied to that electron.
What is a work function?The work function of a metal refers to the minimum amount of energy required to remove an electron from the surface of that metal. It is the energy required to overcome the attractive forces between the electron and the metal surface. The work function is usually denoted by the symbol Φ, and its unit is joules (J).
In the case of caesium, the work function is 3.0 x 10^-19 J. This means that to remove an electron from the surface of caesium, at least 3.0 x 10^-19 J of energy must be supplied to that electron.
To calculate the frequency of radiation needed to eject electrons of maximum kinetic energy 6.0 x 10^-19 J from a caesium surface, we can use the formula:
maximum kinetic energy = hf - Φ
where h is Planck's constant (6.626 x 10^-34 J s), f is the frequency of the radiation, and Φ is the work function.
If we rearrange this formula to solve for the frequency f, we get:
f = (maximum kinetic energy + Φ) / h
Substituting the given values, we get:
f = (6.0 x 10^-19 J + 3.0 x 10^-19 J) / (6.626 x 10^-34 J s)
f = 7.57 x 10^14 Hz
Therefore, the frequency of radiation needed to eject electrons of maximum kinetic energy 6.0 x 10^-19 J from a caesium surface is 7.57 x 10^14 Hz.
More on work functions can be found here: https://brainly.com/question/20523183
#SPJ1
An object is being pulled along a rough table with a frictional force of 7N acting
upon the object. The object is being pulled along by a horizontal force of 18N and
weighs 30N.
To fathom this issue, we have to be utilize Newton's moment law of movement, which states that the net force acting on an question is equal to the item of its mass and increasing speed. Able to utilize this law to discover the speeding up of the object:
Net force= ma
where m is the mass of the object and a is its increasing speed.
What is the the net force of the object?In this case, the net force is the horizontal force of 18N short the frictional constrain of 7N:
Net constrain = 18N - 7N = 11N
The mass of the object is given as 30N, so we are able modify the condition to unravel for the speeding up:
a = Net force / m = 11N / 30N = 0.37 m/s^2
Hence, the object is accelerating at a rate of 0.37 m/s^2 along the table.
Learn more about newton second law from
https://brainly.com/question/25545050
#SPJ1
A heat engine takes in 6.45 × 103 J of thermal energy from a reservoir at 600 K and returns some of this energy to a reservoir at TL < 600 K .If this engine operates at an efficiency of 0.450, what is the maximum value possible for TL?
A heat engine operates on a Carnot cycle that runs clockwise between a reservoir at 315 K and a reservoir at 280 K. One cycle moves enough energy from the high-temperature reservoir to raise the temperature of 1.0 kg of water by 1.0 K. How much work is done by the engine in one cycle?
The work done by the engine in one cycle is approximately 465.1 J.
For the first question, we need to find the maximum value for TL. We know the efficiency of the engine (η) is 0.450, and the efficiency of a Carnot engine is given by the formula:
η = 1 - (TL / TH)
where TH is the high-temperature reservoir (600 K) and TL is the low-temperature reservoir. We can rearrange this formula to solve for TL:
TL = TH * (1 - η)
Plugging in the given values:
TL = 600 K * (1 - 0.450)
TL = 600 K * 0.550
TL = 330 K
The maximum value possible for TL is 330 K.
For the second question, we are given that one cycle moves enough energy from the high-temperature reservoir (315 K) to raise the temperature of 1.0 kg of water by 1.0 K. The specific heat capacity of water is 4.186 J/gK or 4186 J/kgK. So, the heat transferred (Q) is:
Q = mass * specific heat capacity * temperature change
Q = 1.0 kg * 4186 J/kgK * 1.0 K
Q = 4186 J
In a Carnot engine, efficiency (η) is given by the formula:
η = 1 - (TL / TH)
Plugging in the given values:
η = 1 - (280 K / 315 K)
η = 1 - 0.8889
η = 0.1111
The efficiency of the engine is 0.1111. To find the work done (W) by the engine in one cycle, we can use the formula:
W = η * Q
Plugging in the values:
W = 0.1111 * 4186 J
W ≈ 465.1 J
Learn more about work done here:-
https://brainly.com/question/13662169
#SPJ11
A puck slides on a frictionless table hitting a block. in which scenario does the puck exert the most force on the block?
The force exerted by the puck on the block depends on the rate of change of momentum during the collision.
To determine the scenario in which the puck exerts the most force on the block, we need to consider the principles of conservation of momentum.
The momentum of an object is defined as the product of its mass and velocity.
According to the law of conservation of momentum, the total momentum before the collision is equal to the total momentum after the collision, assuming no external forces are acting on the system.
Let's consider two scenarios:
Scenario 1: The puck approaches the block with a higher initial velocity.
Scenario 2: The puck approaches the block with a lower initial velocity.
In both scenarios, the mass of the puck and the block remains constant.
However, the difference lies in the initial velocity of the puck.
According to the conservation of momentum, the change in momentum of the puck must be equal and opposite to the change in momentum of the block.
If the initial momentum of the puck is greater in scenario 1 compared to scenario 2, the change in momentum will also be greater.
Since force is defined as the rate of change of momentum, a greater change in momentum implies a larger force.
Hence, in scenario 1 where the puck has a higher initial velocity, the puck will exert more force on the block during the collision.
To summarize, the puck exerts the most force on the block when it approaches the block with a higher initial velocity (scenario 1).
To know more about conservation of momentum refer here
https://brainly.com/question/24989124#
#SPJ11
Find the frequency of the 5th harmonic (h5) of a 5 hz fundamental
The frequency of the 5th harmonic of a 5 Hz fundamental is 25 Hz.
To find the frequency of the 5th harmonic (h₅) of a 5 Hz fundamental, you need to multiply the fundamental frequency (f₁) by the harmonic number (n). The formula is:
fₙ = n*f₁
where:
fₙ = frequency of the nth harmonic
f₁ = fundamental frequency
n = harmonic number
In this case, the fundamental frequency (f₁) is 5 Hz and the harmonic number (n) is 5. So, the frequency of the 5th harmonic (h₅) would be:
h₅ = 5 * 5
= 25 Hz
To know more about frequency, here
brainly.com/question/5102661
#SPJ4
Hunter pushed a couch across the room. He did 800 J of work in 20 seconds.
The couch weighed 500 N. How much power did he have?
A. 40 W
B. 1. 6 W
C. 16,000 W
D. 800 W
SUBMIT
Hunter had a power of 40 watts when he pushed the couch across the room.
To solve this problem, we need to use the formula for power, which is P = W/t, where P is power measured in watts, W is work measured in joules, and t is time measured in seconds.
Given that Hunter did 800 J of work in 20 seconds, we can calculate his power as follows:
P = W/t
P = 800 J / 20 s
P = 40 W
Therefore, Hunter had a power of 40 watts when he pushed the couch across the room.
It's important to note that power is a measure of how quickly work is done. In this case, Hunter did 800 J of work in 20 seconds, which means he was doing work at a rate of 40 J/s (or 40 watts). His power would have been greater if he had done the same amount of work in less time. Conversely, his power would have been lower if he had taken longer to do the work.
Know more about Power here:
https://brainly.com/question/24001284
#SPJ11
Two lines meet at a point that is also the vertex of a right angle. Set up and solve an equation to find the value of. Find the measurements of ∠CAE and ∠BAG.
1: What is the value of x?
2: What is the value of ∠CAE?
3: What is the value of ∠BAG?
Two lines meet at a point that is also the vertex of a right angle. The value of x is 0 degrees, the value of ∠CAE is 0 degrees and the value of ∠BAG is 90 degrees.
Since the point of intersection is the vertex of a right angle, we know that the sum of the angles formed by the two lines must be 180 degrees.
Let's assume that angle BAC is equal to x. Then we have:
∠BAC + ∠CAD + ∠BAE = 180 degrees
Since ∠CAD and ∠BAE are both right angles, we have:
x + 90 degrees + 90 degrees = 180 degrees
Simplifying this equation, we get:
x = 180 degrees - 90 degrees - 90 degrees
x = 0 degrees
Therefore, angle BAC is equal to 0 degrees.
Since angle CAD is a right angle, angle CAE is equal to 90 degrees - angle CAD. Substituting 90 degrees for angle CAD, we get:
∠CAE = 90 degrees - 90 degrees = 0 degrees
Therefore, angle CAE is also equal to 0 degrees. Similarly, since angle BAE is a right angle, angle BAG is equal to 90 degrees - angle BAE. Substituting 90 degrees for angle BAE, we get:
∠BAG = 90 degrees - x = 90 degrees - 0 degrees = 90 degrees
Therefore, angle BAG is equal to 90 degrees.
In summary, by using the fact that the sum of the angles formed by the two lines must be 180 degrees, we can solve for the value of x and the measurements of angles CAE and BAG. We found that x is equal to 0 degrees, angle CAE is equal to 0 degrees, and angle BAG is equal to 90 degrees.
To know more about right angle refer here:
https://brainly.com/question/29623146#
#SPJ11
Which observation supports a model of the nature of light in which light acts as a wave
The observation from the constructive interference supports the model of the wave nature of light. The correct option (A).
The observation of diffraction and interference lends weight to the idea that light behaves like a wave. When two or more waves interact with one another, interference occurs. It can be constructive (where the waves reinforce one another) or destructive (where the waves cancel one another out). When light waves from various sources overlap or pass through small gaps, this phenomenon can be seen.
Another property of waves, including light waves, is diffraction. When waves approach an obstruction or pass through an opening, they may bend or spread out. When light waves come into contact with sharp edges, slits, or other obstructions, diffraction patterns can be seen, and they are compatible with how waves behave.
Strong proof that light is a wave and that theories like the electromagnetic wave theory of light are correct can be found in the observations of interference and diffraction.
Hence, The observation from the constructive interference supports the model of the wave nature of light. The option is (A).
To learn more about Constructive interference, here:
https://brainly.com/question/31857527
#SPJ12
Complete Question:
Which observation supports a model of the nature of light in which light acts as a wave?
A. Constructive interference
B. Temperature change
C. Blackbody radiation
D. Photoelectric effect
Deployment Worksheet 2b - Work 1. A 1400 N force is applied parallel to a horizontal surface. It pushes an 80 kg box 2 m across the surface. What work is done
The work done in pushing the 80 kg box 2 meters across the surface with a 1400 N force applied parallel to the surface is 2800 Joules.
To find the work done, we need to consider the force applied, the displacement, and the angle between them.
In this case, the force (F) applied is 1400 N, the displacement (d) is 2 meters, and since the force is applied parallel to the horizontal surface, the angle (θ) between the force and the displacement is 0 degrees. The formula to calculate work (W) is:
W = F × d × cos(θ)
Now, let's substitute the given values:
W = 1400 N × 2 m × cos(0°)
Since cos(0°) = 1, the equation becomes:
W = 1400 N × 2 m × 1
W = 2800 J (Joules)
So, the work done in pushing the 80 kg box 2 meters across the surface with a 1400 N force applied parallel to the surface is 2800 Joules.
Learn more about work at: https://brainly.com/question/3714635
#SPJ11
Two devices of rating 22 W; 220 V and 11 W; 220 V are connected in series. The combination is
connected across a 440 V mains. The fuse of which of the two devices is likely to burn when
switch is on ? Justify your name.
The 11 W device is likely to burn out when the switch is turned on, due to the higher voltage it will be subjected to compared to its rated voltage. It is important to ensure that the devices used in a circuit have the appropriate voltage rating to avoid damage or failure.
When two devices with different power ratings are connected in series, the voltage across each device is divided according to their power ratings. In this case, the two devices are rated 22 W and 11 W, respectively, and are connected in series across 440 V mains. The voltage across each device can be calculated using the formula V = P/I, where V is the voltage, P is the power rating, and I is the current.
For the 22 W device, the voltage across it is V = P/I = 22/0.1 = 220 V. For the 11 W device, the voltage across it is V = P/I = 11/0.1 = 110 V. Therefore, the 22 W device has a voltage rating of 220 V, which is the same as the voltage of the mains, and the 11 W device has a voltage rating of 110 V.
When the switch is turned on, the voltage across the two devices will be the same, which is 220 V. Therefore, the 22 W device will operate normally, but the 11 W device will be subjected to a higher voltage than its rated voltage. As a result, the 11 W device is likely to burn out before the 22 W device.
To learn more about voltage rating
https://brainly.com/question/29734919
#SPJ4
A uniform disk of radius 0.455 m0.455 m and unknown mass is constrained to rotate about a perpendicular axis through its center. a ring with the same mass as the disk is attached around the disk's rim. a tangential force of 0.227 n0.227 n applied at the rim causes an angular acceleration of 0.109 rad/s2.0.109 rad/s2. find the mass of the disk.
The mass of the disk is 1.90 kg.We can start by using the formula for torque, which relates torque to angular acceleration and moment of inertia:
τ = Iα
where τ is the torque, I is the moment of inertia, and α is the angular acceleration.
Since the disk is rotating about a perpendicular axis through its center, its moment of inertia can be calculated as:
I_disk = (1/2)MR^2
where M is the mass of the disk and R is its radius.
Similarly, the moment of inertia of the ring can be calculated as:
I_ring = MR^2
where M is the mass of the ring and R is its radius (which is the same as the radius of the disk).
Since the disk and ring have the same mass, we can add their moments of inertia to get the total moment of inertia:
I_total = I_disk + I_ring = (1/2)MR^2 + MR^2 = (3/2)MR^2
Now we can use the given values of torque and angular acceleration to solve for the mass of the disk:
τ = (1/2)MR^2α
0.227 N-m = (1/2)M(0.455 m)^2(0.109 rad/s^2)
Solving for M, we get:
M = 0.227 N-m / [(1/2)(0.455 m)^2(0.109 rad/s^2)] = 1.90 kg
Therefore, the mass of the disk is 1.90 kg.
To know more about the mass of inertia click here:
https://brainly.com/question/12095689
#SPJ11
a fuel was used to heat water in a calorimetry experiment. when propane was burnt, 17000.0 j of heat was transferred to the water, which lead to a temperature change of 7.16 k. calculate the mass of water that was heated. (the specific heat capacity of water
The mass of water that was heated in the calorimetry experiment was 547.73 g.
T is the temperature change (7.16 K). Rearranging the formula to find the mass (m):
m = Q / (cΔT) Plugging in the values:
m = 17000.0 J / (4.18 J/g·K × 7.16 K) m ≈ 657.71 g
So, approximately 657.71 grams of water was heated in the calorimetry experiment.
To calculate the mass of water that was heated, we need to use the formula:
Q = m × c × ΔT
where Q is the heat transferred, m is the mass of water, c is the specific heat capacity of water, and ΔT is the temperature change.
We are given that Q = 17000.0 J, ΔT = 7.16 K, and c = 4.18 J/(g·K) (the specific heat capacity of water). We can rearrange the formula to solve for m:
m = Q / (c × ΔT)
Substituting the values we have:
m = 17000.0 J / (4.18 J/(g·K) × 7.16 K)
m = 547.73 g
To learn more about : calorimetry
https://brainly.com/question/28537741
#SPJ11
state types reflection of light
Answer: Specular and Diffuse reflection
Explanation: I'm assuming this is what you need. Specular is light reflected from a smooth surface at an angle. Diffuse is related to rough surfaces, generally, light is reflected in all directions with diffuse reflection
Jose conducted an experiment to measure the rate of minerals dissolving in water and changed the temperature of the water for each trial.
What is the independent variable in this experiment?
A: number of trials being tested
B: temperature of the water
C: type of minerals used for each trial
D: rate the minerals dissolved
The temperature of the water is the independent variable because it is being deliberately changed by the experimenter to see how it affects the rate of mineral dissolution. Option B.
What is an independent variable?The independent variable is the variable that the researcher intentionally changes or manipulates in an experiment in order to observe its effect on the dependent variable.
In this case, the independent variable is the temperature of the water because it is what Jose is changing in each trial to see how it affects the rate at which the minerals dissolve.
The dependent variable, on the other hand, is the rate at which the minerals dissolve, because it is what is being measured and expected to change based on the independent variable.
More on independent variables can be found here: https://brainly.com/question/29430246
#SPJ1
The frequency of a slinky spring wave is 5 hertz with a wavelength of 0.8 meters. What is its velocity?
Answer:The frequency of a slinky spring wave is 5 hertz with a wavelength of 0.8 meters. What is its velocity?The speed can be found with a very simple equation: c = λ f = 0.8 ⋅ 5 = 4 m/s .
Explanation:
The speed can be found with a very simple equation: c = λ f = 0.8 ⋅ 5 = 4 m/s .
Why was it important that dr. Jeff use a large ball to represent the sun a marble to represent the earth and a bead to represent the moon in his model
It was important for Dr. Jeff to use a large ball to represent the sun because the sun is much larger than the earth and the moon. Similarly, using a marble to represent the earth and a bead to represent the moon accurately represents their relative sizes in comparison to the sun. This helps to provide a visual representation that accurately depicts the sizes of the celestial bodies in question, which is important when teaching and understanding astronomical concepts.
Visit https://brainly.com/question/12075871 to learn more about the Solar System
#SPJ11
Based on the text how might the surfing "purists" feel about the movement toward incorporating aerial moves into surfing competitions? Use evidence from the text to support your answer
Surfing purists dislike aerial moves in competitions, preferring traditional surfing. There is controversy over the emphasis on aerial moves, and diversity of opinion within the community.
The surfing "purists" are likely to be critical of the movement towards incorporating aerial moves into surfing competitions, as they are described as valuing "traditional" or "classic" surfing.
The text notes that these purists "feel that aerial moves represent a departure from classic surfing," and quotes a professional surfer who suggests that "real surfing is all about turns and the flow of the wave."
The article also notes that there is some controversy within the surfing community over the emphasis on aerial moves, with some feeling that it has become too dominant in competitions. This further suggests that there are those within the community who are resistant to this trend.
Overall, it seems that the surfing "purists" value a more traditional, flowing style of surfing and may view aerial moves as a departure from this style.
However, it is important to note that there is diversity of opinion within the surfing community, and not all surfers or fans may share this view.
To know more about surfing refer here:
https://brainly.com/question/30407403#
#SPJ11
The thinking distance and braking distance for a car vary with the speed of the car.
explain the effect of two other factors on the braking distance of a car.
do not refer to speed in your answer.
Two other factors that affect the braking distance of a car are the condition of the road surface and the condition of the brakes.
On a wet or icy road, the braking distance will be longer compared to a dry road as the tires have less grip.
Similarly, if the brakes are worn out or not properly maintained, the braking distance will increase.
This is because the brakes will not be able to apply enough force to the wheels to slow down the car effectively.
Therefore, it is important to ensure that the brakes are well maintained and the tires are appropriate for the road conditions to reduce the braking distance and avoid accidents.
To know more about brakes, refer here:
https://brainly.com/question/30327253#
#SPJ11
On its highest power setting, a certain microwave oven projects 1.00kW of microwaves onto a 30.0 by 40.0 cm area. (A) what is the intensity in W/m^2 ? (B) calculate the peak electric field srength E0 in these waves. (C) what is the peak magnetic field strength B0?we use the equation I=P/A. which gives us the answer 8.33 * 10^3 W/m^2 and then moves on to give us 2I average = 1.67 * 10^4.i dont understand how they got the 2Iave=1.67×10^4
On its highest power setting, a certain microwave oven projects 1.00kW of microwaves onto a 30.0 by 40.0 cm area. Intensity is 8.33 × 10^3 W/m^2, Peak electric field strength is 4.84 × 10^4 V/m, Peak magnetic field strength is 1.61 × 10^-4 T
(A) To find the intensity (I) in W/m^2, we use the formula I = P/A, where P is power and A is area.
Power (P) = 1.00 kW = 1000 W
Area (A) = 30.0 cm × 40.0 cm = 0.3 m × 0.4 m = 0.12 m^2
I = P/A = 1000 W / 0.12 m^2 = 8.33 × 10^3 W/m²
(B) The average intensity (I_average) is related to the peak electric field strength (E0) by the formula:
I_average = (1/2) × ε0 × c × E0^2
where ε0 is the vacuum permittivity (8.85 × 10^-12 C^2/N·m^2), c is the speed of light (3 × 10^8 m/s), and E0 is the peak electric field strength.
To find the peak electric field strength, first, we'll rearrange the formula to isolate E0:
E0^2 = (2 × I_average) / (ε0 × c)
E0 = sqrt((2 × I_average) / (ε0 × c))
Now, let's plug in the values:
E0 = sqrt((2 × 8.33 × 10^3 W/m^2) / (8.85 × 10^-12 C^2/N·m^2 × 3 × 10^8 m/s))
E0 ≈ 4.84 × 10^4 V/m
(C) To find the peak magnetic field strength (B0), we use the formula:
B0 = E0 / c
B0 = (4.84 × 10^4 V/m) / (3 × 10^8 m/s)
B0 ≈ 1.61 × 10^-4 T
Learn more about microwave oven here:-
https://brainly.com/question/29944171
#SPJ11
In the figure, a horse pulls a barge along a canal by means of a rope. The force on the barge from the rope has a magnitude of 7890 N and is at the angle θ = 13° from the barge's motion, which is in the positive direction of an x axis extending along the canal. The mass of the barge is 9500 kg, and the magnitude of its acceleration is 0. 12 m/s2. What are (a) the magnitude and (b) the direction (measured from the positive direction of the x axis) of the force on the barge from the water? Give your answer for (b) in the range of (-180°, 180°]
A horse pulls a barge along a canal by means of a rope. The force on the barge from the rope has a magnitude of 7890 N and is at the angle θ = 13° from the barge's motion, which is in the positive direction of an x axis extending along the canal. The mass of the barge is 9500 kg, and the magnitude of its acceleration is 0. 12 m/[tex]s^{2}[/tex]. 7890 N is the magnitude of the force and its direction (measured from the positive direction of the x axis) is 103°.
a. To solve this problem, we need to use Newton's second law, which states that the net force acting on an object is equal to the product of its mass and acceleration
Fnet = m*a.
We can start by finding the net force acting on the barge, which is the force of the rope pulling it forward minus the force of the water pushing against it. Since the barge is moving at a constant speed, the net force must be zero. Thus, we have
Frope - Fwater = 0
Solving for Fwater, we get
Fwater = Frope = 7890 N
This is the magnitude of the force on the barge from the water.
b. To find the direction of this force, we need to use trigonometry. Let's call the angle between the force of the rope and the positive x axis φ. Then we have
φ = 90° - θ = 90° - 13° = 77°
This means that the force of the rope makes an angle of 77° with the negative x axis. Since the net force is zero, the force of the water must make an angle of 180° - 77° = 103° with the negative x axis.
Therefore, the magnitude of the force on the barge from the water is 7890 N and its direction (measured from the positive direction of the x axis) is 103°.
To know more about magnitude here
https://brainly.com/question/31319040
#SPJ4
If x = 3.0 cm and y = 15.0 cm, what is the ideal mechanical advantage (ima) of the
pliers?
If x = 3.0 cm and y = 15.0 cm, The ideal mechanical advantage (ima) of the pliers is: 5.
The IMA of pliers can be determined by using the formula:
IMA = Length of Effort Arm (y) / Length of Resistance Arm (x)
In this case, y is the length of the effort arm (15.0 cm), and x is the length of the resistance arm (3.0 cm). Plugging these values into the formula, we get:
IMA = 15.0 cm / 3.0 cm
IMA = 5
So, the ideal mechanical advantage of the pliers is 5. This means that, ideally, the force applied by the pliers is magnified by a factor of 5.
To know more about mechanical advantage, refer here:
https://brainly.com/question/6968974#
#SPJ11
Stephen rubbed one balloon on his hair for 10 seconds.
Then he grabbed another balloon and rubbed it on his hair for 10 seconds.
What will happen if he ties a string to each balloon and places them next to each other?
a The two balloons will repel.
b The two balloons will attract.
c The two balloons will do nothing since they are not charged.
Answer:
a. The two balloons will repel
Explanation:
when stephen rubs the balloon on his head, the balloon collects a negative charge. this will happen to both balloons and because the balloons are both negatively charged they will repel
Name two everyday examples in which stored elastic potential energy is made use of. In each case state the energy transfer which occurs
Stored elastic potential energy can be utilized in everyday objects such as springs and rubber bands, allowing for the transfer of energy through the conversion of potential energy into kinetic energy.
One common example of stored elastic potential energy being utilized is a compressed spring. When a spring is compressed, work is done on it to store potential energy, which can then be released to do work on other objects. For instance, a spring-loaded toy car will store potential energy in its compressed spring, which is then released when the car is let go, causing it to move forward. This energy transfer is from the spring to the car's kinetic energy.
Another example of stored elastic potential energy is a stretched rubber band. When a rubber band is stretched, energy is stored in its molecular bonds, which can be released when the band is allowed to snap back into its original shape. This potential energy can be utilized in everyday life, for example, in a slingshot. When the rubber band is stretched back in a slingshot, it stores potential energy, which is then released when the projectile is released, converting potential energy into kinetic energy. This energy transfer is from the rubber band to the projectile's kinetic energy.
In both cases, the transfer of energy occurs through the conversion of potential energy into kinetic energy, allowing for work to be done on another object. These examples show how the principle of stored elastic potential energy can be utilized in everyday objects, making them more efficient and useful.
To learn more about potential energy
https://brainly.com/question/24284560
#SPJ4