wellllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllll

Answers

Answer 1

What?
What was this posted for?

Answer 2
Raziy why did we post this

Related Questions

what temporary land mass linking siberia and alaska is thought to have allowed hunter-gatherers to migrate from asia to north america? responses siberian connection siberian connection beringia beringia alaska glacial pathway alaska glacial pathway bering strait bering strait temporary land mass linking siberia and alaska is thought to have allowed hunter-gatherers to migrate from asia to north america?

Answers

Beringia is a temporary land mass which linked Siberia and Alaska, allowing hunter-gatherers to migrate from Asia to North America.

The correct option is B.

Beringia was formed during the Late Pleistocene era, approximately 20,000 to 30,000 years ago. This land bridge was formed due to a decrease in sea levels, exposing a wide swath of land between Siberia and Alaska. This land bridge allowed humans to migrate from Asia to North America, which is believed to have been the first humans to settle in the Americas.

The land bridge was eventually submerged by rising sea levels, but it is believed that this land bridge allowed humans to travel across the Bering Strait, settling in both North and South America. This is known as the Bering Land Bridge Theory, and is the most widely accepted theory for the first human migration to the Americas.

Hence, the correct option is B

To know more about Beringia, Click here:

https://brainly.com/question/1321990

#SPJ4

Please help dawg my teacher doesn't explain stuff

Answers

The values of x in the triangles and the missing lengths are solved below

Calculating the values of x in the triangle

Given that the triangles are special triangles with 45 degree angle, we have

Hypotenuse = Leg√2

So, we have

x = 8√2x = 6x = 5x = 2√2

Calculating the values of x and y in the triangles

Here, we use the trigonometry ratios

figure 5

cos(60) = 7/y

y = 14

x = √(14² - 7²)

x = 7√3

figure 6

cos(30) =2√3/y

y = 4

x = √(4² - (2√3)²)

x = 2

figure 7

cos(60) = x/10√3

x = 5√3

y = √((10√3)² - (5√3)²)

y = 15

figure 8

sin(30) = x/18

x = 9

y = √(18² - 9²)

y = 9√3

The areas of the figures

Here, we have

Area = (d/√2)²

Area = (16/√2)²

Area = 128

Area = 13 * 6 * sin(60 degrees)

Area = 39√3

The tangents of the acute angles

Here, we have

tan(K) = 48/14 = 24/7

tan(J) = 14/48 = 7/24

tan(D) = 6√2/3 = 3√2

tan(E) = 3/6√2 = √2/4

Calculating the values of x in the triangles

Here, we have

tan(23) = x/53

x = 22.50

tan(43) = 36/x

x = 38.61

tan(28) = x/y

tan(45) = x/82

So, we have

x = 82 and tan(28) = 82/y

x = 82 and y = 154.2

The height of the building

Here, we have

tan(65) = h/30

h = 64.34

Finding RS

Here, we have

RQ = 14tan(56)

QS = 14tan(32)

So, we have

RS = RQ - QS

RS = 14tan(56) - 14tan(32)

Evaluate

RS = 12

Hence, the length RS is 12 units


Read more about right triangles at

https://brainly.com/question/2437195


#SPJ1

PLEASE HELP:
write a paragraph on how Benito Mussolini treated people poorly

Answers

Benito Mussolini, the leader of Italy during World War II, was known for his brutal and oppressive regime. He treated people poorly, particularly those who opposed him and his fascist ideology. Mussolini was known to use violence, intimidation, and propaganda to suppress dissent and control the population. He established a secret police force, known as the OVRA, which had the power to arrest, detain, and torture anyone suspected of opposing the regime. Mussolini also implemented discriminatory policies against minority groups, such as Jews and homosexuals, leading to their persecution and even death. His reign of terror resulted in the suffering and loss of countless lives, leaving a dark stain on Italy's history.

what group of materials in exterior envelopes survive moisture from rainfall and condensation for long periods without major deterioration?

Answers

The term "moisture-resistant materials" refers to a class of materials used in external coverings that can endure moisture from condensation and rainwater for extended periods without suffering significant degradation.

These materials are made to endure moisture contact without suffering serious deterioration, decay, or harm. Concrete, stone, metal, glass, and some kinds of treated timber are a few typical examples of moisture-resistant materials used in external envelopes.

These materials are extremely robust and resistant to moisture-related harm over time due to their innate qualities, which include low porosity, high density, and resistance to rot and decline.

Learn more about moisture-resistant materials at

https://brainly.com/question/29410905

#SPJ4

Explain how the data above support the hypothesis that a destabilized polar jet stream caused the cold spell seen in the midwest.

Answers

It would be clear evidence that the jet stream is crucial in controlling weather patterns in the area if data from these sources (and possibly others) confirmed the theory that a destabilized polar jet stream was to blame for the cold spell in the Midwest.

Why has the polar jet stream become unstable due to climate change?

With the transition, higher latitudes are becoming warmer and the temperature gap between the polar areas and the warmer mid-latitudes is decreasing. Polar air is brought further south as a result of the polar jet stream being weaker and less stable, forcing it to dip into lower latitudes.

What is the relationship between the polar jet stream and the polar vortex?

Polar jetstream as opposed to a polar vortex-

The air within becomes increasingly isolated from warmer latitudes and becomes colder as the winds get stronger. The polar jet stream, which is located in the troposphere, tends to move northward when the Arctic polar vortex is particularly powerful and stable (left globe).

To know more about jet stream visit:

https://brainly.com/question/31367235

#SPJ9

the following objects have been found at an archaeological site. which ones can be used for relative dating and which ones can be used for absolute dating? can any be used for both? drag the artifacts to the correct places on the venn diagram.

Answers

When burned, these fossil fuels emit harmful gases including carbon dioxide and sulfur dioxide which increase the amount of greenhouse gases in the atmosphere resulting in global warming. Air pollution is much worse in highly populated cities where more factories emit pollution in close proximity to humans.

At an archaeological site, both relative and absolute dating methods can be used to determine the age of objects.
Relative dating methods involve placing objects in a sequence based on their relationship with one another, without determining an exact age. Absolute dating methods provide an actual age for an object using scientific techniques.

Artifacts that can be used for relative dating include those that show signs of wear or deposition, such as pottery sherds, stone tools, and bones. These objects can be compared to similar objects found at other sites or within the same site to establish a chronological sequence.

Absolute dating methods provide an actual age for an object using scientific techniques, such as radiocarbon dating or dendrochronology. Artifacts that can be used for absolute dating include organic materials like wood, bone, and charcoal, as well as minerals like volcanic ash layers and crystalline formations. These materials contain elements or isotopes that decay at a known rate, allowing scientists to calculate their age.

Some objects can be used for both relative and absolute dating. For example, bones can be used for relative dating based on their position within a site, and they can also be used for absolute dating if they contain enough organic material for radiocarbon dating.

In summary, artifacts like pottery sherds, stone tools, and bones can be used for relative dating, while organic materials and minerals like wood, bone, charcoal, volcanic ash, and crystalline formations can be used for absolute dating. Bones can potentially be used for both relative and absolute dating methods.

To learn more about archaeological site here:

https://brainly.com/question/575997#

#SPJ11

what kinda challenges do the Andean And Midlatitude countries face

Answers

Answer:

Andean countries such as Colombia, Ecuador or Perú have the challenge of mining the regions minerals.

Explanation:

which of the following is correct? a. mafic magma has a much lower viscosity than felsic magma. b. mafic magma has a much greater viscosity than felsic magma. c. mafic magma and felsic magma are equally viscous. d. depending on its silica content, the viscosity of mafic magma may be greater or lower than that of felsic magma.

Answers

Answer:

mafic magma has a much lower viscosity than felsic magma.

Mafic magma has a much lower viscosity than felsic magma. The correct answer is A.

Mafic and felsic magmas differ in their chemical compositions, which in turn influence their physical properties, including viscosity. Mafic magma has a lower silica content (around 50%) compared to felsic magma, which has a higher silica content (around 65-75%). Silica content plays a significant role in determining a magma's viscosity, as higher silica content leads to higher viscosity.

Viscosity refers to a fluid's resistance to flow, and in the case of magma, it affects how easily the molten rock can move and deform. Mafic magma, with its lower silica content, is less viscous and flows more easily than felsic magma. This difference in viscosity can also impact volcanic eruptions; mafic magma can lead to more fluid, less explosive eruptions, whereas felsic magma can result in more explosive eruptions due to its higher viscosity trapping gases within the magma.

To learn more about Mafic magma here:

https://brainly.com/question/14970752#

#SPJ11

which statement best describes the way vegetation affects slope stability? group of answer choices the weight of vegetation increases the chances of mass movement events on heavily vegetated slopes. the root systems of vegetation help bind together soil and regolith. vegetation protects against erosion from raindrops and helps bind together soil and regolith. vegetation protects against erosional effects of raindrop impact.

Answers

The root systems of vegetation help bind together soil and regolith, which can increase slope stability by reducing the risk of mass movement events such as landslides or erosion caused by raindrop impact.

Vegetation can be very important in hillside support. The root systems of plants help to bond the soil and regolith together, which can improve the slope's stability by decreasing the risk of mass movement events like landslides. Furthermore, flora shields against erosion caused by raindrop contact and can help to bond soil and regolith together, which adds to slope stability.

However, the weight of vegetation on highly vegetated slopes can raise the likelihood of mass movement events in some instances, so the particular impacts of vegetation on slope stability depend on a variety of variables.

Learn more about vegetation:

https://brainly.com/question/21852167

#SPJ4

what is a linear sea floor feature that is seismically active, occurs between offset mid-ocean ridge segments, and the relative movement between two points on either side of the feature is in the opposite direction?

Answers

A linear seafloor feature that is seismically active and occurs between offset mid-ocean ridge segments, with relative movement between two points on either side of the feature in the opposite direction, is known as a transform fault. These faults are characterized by horizontal motion along the seafloor, connecting two offset sections of a mid-ocean ridge.

Transform faults play a crucial role in the movement of tectonic plates, as they accommodate the differences in spreading rates between the adjacent ridge segments. They are a key component of the global system of mid-ocean ridges, which form a continuous network of volcanic underwater mountain ranges around the world.

As the tectonic plates move apart along the mid-ocean ridge, new oceanic crust is formed through volcanic activity, which in turn pushes the older crust away from the ridge. This process is known as seafloor spreading. Transform faults develop as a result of the interaction between the spreading ridges and the movement of the tectonic plates. These faults are seismically active, as they release the built-up stress in the form of earthquakes.

In summary, a transform fault is a linear seafloor feature that is seismically active and connects offset segments of mid-ocean ridges. The relative movement of points on either side of the fault is in the opposite direction, making it a crucial component of plate tectonics and seafloor spreading.

To learn more about transform fault here:

https://brainly.com/question/29107141#

#SPJ11

what term refers to the original location of a settlement and the factors that influenced the choice of that location?

Answers

The expression "site" alludes to the particular place where a settlement or local area is laid out, and the variables that impacted the decision of that area. The term is utilized in geology, human sciences, and other related fields that concentrate on human settlements and their communication with the climate.

At the point when people choose to lay out a settlement in a specific area, they consider a few factors that make that area reasonable for their requirements. These variables can incorporate the actual attributes of the site, like the geography of the land, the environment, and the accessibility of normal assets like water, prolific soil, and lumber.

For instance, a settlement situated close to a stream or a coast might approach freshwater and fish, while a settlement situated in a dry and parched locale might depend on wells or underground springs for water. Likewise, a settlement situated in a forested locale might approach wood for development and fuel, while a settlement situated in a prairie or savannah district might depend on brushing creatures for food and dress.

Notwithstanding the actual qualities of the site, different variables that might impact the decision of a settlement area incorporate its closeness to transportation courses, different settlements, and exchange organizations. Settlements situated close to significant transportation courses, like streams, streets, or rail lines, may have more prominent admittance to labor and products, while settlements situated in disengaged or far off regions might be more independent however have restricted admittance to outside assets.

Understanding the site of a settlement is significant for concentrating on the turn of events and development of human social orders over the long haul. By looking at the physical and social qualities of a site, scientists can acquire bits of knowledge into the elements that impacted decisions by past social orders and the manners by which they adjusted to their current circumstance. This information can likewise illuminate current metropolitan preparation and advancement endeavors, as it can assist organizers with distinguishing reasonable areas for new settlements and to plan foundation and administrations that address the issues of neighborhood networks.

The term that refers to the original location of settlement and the factors that influenced the choice of that location is "site and situation."

The "site" refers to the physical characteristics of the location where a settlement was established. Factors that contribute to the site selection include the availability of water, suitable land for agriculture, natural resources, and protection from natural hazards and enemies. The "situation" refers to the broader context of the settlement's surroundings, such as its proximity to trade routes, nearby settlements, and potential for growth.

When choosing a site for a settlement, early settlers considered several factors. Access to a reliable water source, such as a river or a lake, was crucial for drinking, irrigation, and transportation. Suitable land for agriculture was another important factor since it would provide food for the population. The availability of natural resources, such as timber, stone, and minerals, was also essential for the growth and development of the settlement.

Protection from natural hazards, such as floods, earthquakes, or landslides, was a consideration for the safety of the inhabitants. Settlers also sought locations that offered protection from potential enemies, such as elevated areas or those surrounded by natural barriers like mountains or dense forests.

The situation of a settlement played a significant role in its success and growth. Settlements situated near trade routes or other settlements benefitted from the exchange of goods, ideas, and resources, promoting economic and cultural development. The potential for growth was another factor, as settlements needed room to expand as their populations grew.

In conclusion, the term "site and situation" refers to the original location of a settlement and the factors that influenced its selection. These factors include physical characteristics, such as access to water, suitable agricultural land, and natural resources, as well as protection from hazards and enemies. The situation of the settlement, including its proximity to trade routes and nearby settlements, also played a role in its success and growth.

To learn more about location of settlement here:

https://brainly.com/question/28162006#

#SPJ11

based on the rates and directions of the plate movement that we observe today, how might the positions of the continents be different 50 million years from now?

Answers

It is difficult to predict with any certainty the exact positions of the continents in 50 million years from now.

However, based on the current rates and directions of the plate movements, it is likely that the continents will have moved and shifted significantly. For instance, the North American, South American, and African plates are moving in a westward direction, which could result in the formation of a supercontinent in the Atlantic Ocean.

Additionally, the Indo-Australian Plate is moving northward, which could cause the Indian subcontinent to collide with the Eurasian Plate, leading to the formation of a new supercontinent. Finally, the Pacific Plate is moving in a northwestward direction, potentially shifting the continents of Australia, New Zealand, and Polynesia towards the Asian continent.

To know more about continents , click here:

https://brainly.com/question/17190136

#SPJ4

a long-lived group of thunderstorms that causes a concentrated area wind-damage reports at least 400 kilometers (250 miles) long is called a...

Answers

A long-lived group of thunderstorms that causes a concentrated area of wind damage reported at least 400 kilometers (250 miles) long is called a Derecho.

A derecho is a severe thunderstorm with a very long duration. If a storm's wind damage swath is more than 240 miles long and there are gusts of wind of at least 58 mph along the majority of the storm's route, the storm is categorized as a derecho.

A mesoscale convective system, which is characterized by a rapidly moving collection of severe thunderstorms, is the source of a derecho, which is a widespread, protracted, straight-line windstorm. Heavy rainfall, tornado- and hurricane-force winds, as well as flash floods, can all result from Derechos.

The Spanish word "derecho" means "direct" or "straight ahead;" It was created by Hinrichs to differentiate the damage caused by straight-line wind from that caused by tornadoes.

To learn more about Derecho, click here:

https://brainly.com/question/24078934

#SPJ4

Earth is more than 70 million kilometers closer to the Sun than Mars. True or False

Answers

False. Earth is actually closer to the Sun than Mars, but the difference in distance is not as large as 70 million kilometers.

On average, the distance between the Sun and Earth is about 149.6 million kilometers, while the distance between the Sun and Mars is about 227.9 million kilometers. Therefore, Mars is actually more than 78 million kilometers further from the Sun than Earth.The distance between a planet and the Sun is determined by its orbit, which is influenced by a number of factors including gravity and the planet's velocity. The orbits of Earth and Mars are both elliptical, which means that they are not perfectly circular. This can cause variations in their distance from the Sun at different times in their orbits. While Earth is closer to the Sun on average, there are times when Mars can be closer due to the shape of its orbit. However, overall, Mars is much further from the Sun than Earth, with a difference of more than 78 million kilometers in their average distances

To learn more about Earth here:

https://brainly.com/question/31064851

#SPJ1

considering that (1) washington d.c. is located along a estuary, and (2) sea level is currently rising along the eastern u.s. coastline based on observational data. in what direction will the estuary in which washington d.c. occupies migrate as sea level rises?

Answers

The estuary that Washington, D.C. is located in will move north in the direction of the lowest height as the sea level increases.

To reach the Potomac River, which flows through the city, the bay must travel westward. The Potomac River's water levels will rise as a result of rising sea levels, which will also force the estuary to move north.

The local ecosystem, as well as the structures and facilities along the coastline, will all be significantly impacted by this migration.

To reduce the possible detrimental effects on their cities and inhabitants, coastal areas must prepare for and adjust to the impacts of increasing sea levels.

Learn more about the rise in sea level at

https://brainly.com/question/3988772

#SPJ4

which of the following best describes belady's anomaly? group of answer choices decreasing the number of available frames increases the number of page faults increasing the frame size increases the number of page faults decreasing the frame size increases the number of page faults increasing the number of available frames increases the number of page faults

Answers

Decreasing the number of available frames increases the number of page faults, best describes Belady's anomaly. The correct option is A.

Belady's Anomaly is a phenomenon that occurs in virtual memory systems. It is a counterintuitive behavior in which increasing the number of available frames increases the number of page faults. This anomaly is caused by the locality of reference principle of virtual memory, which states that a program will tend to access memory locations that are close together.

When the number of frames is increased, the working set of a program is broken up into multiple frames. This causes the program to access more frames than it did before and thus creates more page faults. Additionally, decreasing the frame size increases the number of page faults because the same amount of memory is now spread out over a greater number of frames, thus creating more page faults.

To know more about counterintuitive , click here:

https://brainly.com/question/17004386

#SPJ4

what is the temperature of the oceanic crust and continental crust

Answers

Answer: The temperature of the oceanic crust and continental crust can vary depending on the location and depth.

Explanation:

Generally, the temperature of the oceanic crust at the surface ranges from about 2 to 10 °C (36 to 50 °F) in polar regions to about 20 to 25 °C (68 to 77 °F) in the tropics. At the depth of 1 kilometer (0.62 miles) below the surface, the temperature can range from about 100 to 300 °C (212 to 572 °F).

The temperature of the continental crust varies more widely, with an average temperature of about 15 to 25 °C (59 to 77 °F) at the surface, but can reach up to 500 °C (932 °F) at depths of 30 kilometers (18.6 miles) or more in some areas. However, the temperature of the continental crust is generally cooler than the temperature of the oceanic crust.

n what direction does wind blow? in what direction does wind blow? wind blows from regions of higher pressure to regions of lower pressure. wind blows from regions of higher temperature to regions of lower temperature. wind blows from regions of lower pressure to regions of higher pressure. wind blows from regions of lower temperature to regions of higher temperature.

Answers

The wind blows from regions of higher pressure to regions of lower pressure.  Option A is the correct response.

This is known as the pressure gradient force, which causes air to move from high-pressure regions to low-pressure regions. The greater the difference in pressure between two areas, the stronger the wind will be. The Coriolis effect, which deflects the path of moving air to the right in the Northern Hemisphere and to the left in the Southern Hemisphere, also affects wind direction.

This deflection is caused by the Earth's rotation. Therefore, wind can blow in various directions depending on the pressure gradient force and the Coriolis effect.

Correct answer is option A.

You can learn more about wind direction at

https://brainly.com/question/1420586

#SPJ11

the maximum amplitude of a seismic wave from a magnitude 6 earthquake will be how many times greater than that for a magnitude 4 earthquake?

Answers

Answer:
The magnitude of an earthquake determines the amplitude of seismic waves. In particular, each unit increase in magnitude corresponds to a tenfold increase in wave amplitude.

As a result, the amplitude of a seismic wave produced by a magnitude 6 earthquake is 10(6-4) = 100 times greater than that produced by a magnitude 4 earthquake.

In other words, the maximum amplitude of a seismic wave produced by a magnitude 6 earthquake is 100 times greater than that produced by a magnitude 4 earthquake.


When it comes to the maximum amplitude of a seismic wave from a magnitude 6 earthquake being how many times greater than that for a magnitude 4 earthquake, the answer is 100 times greater.

A seismic wave is a shock wave that is caused by an earthquake. They spread out from the focal point, or hypocenter, of the earthquake's release. These waves, which radiate outward from the hypocenter, spread out in all directions.

Seismic waves are created by tectonic shifts in the Earth's crust, and they are divided into two categories: body waves and surface waves. Body waves move through the Earth's interior, while surface waves are restricted to the surface. Earthquakes are classified by their magnitude, which is calculated using the Richter scale. The Richter scale is a logarithmic scale that quantifies the amount of energy released by an earthquake. Each step on the scale is ten times greater than the previous one.

Magnitude 6 earthquakes release 32 times more energy than magnitude 5 earthquakes. Similarly, magnitude 7 earthquakes release 32 times more energy than magnitude 6 earthquakes. The scale is logarithmic, as previously mentioned, and thus every one-point increase corresponds to a tenfold increase in the amount of energy released.

The amplitude of a seismic wave is directly proportional to the magnitude of the earthquake. Therefore, if the magnitude of an earthquake increases by one point, the amplitude of the seismic wave increases by ten times. As a result, the maximum amplitude of a seismic wave from a magnitude 6 earthquake is 100 times greater than that for a magnitude 4 earthquake.

To learn more about earthquake here:

https://brainly.com/question/20409140#

#SPJ11

BC =
Round your answer to the nearest hundredth.
B
35°
6
А

Answers

The length of BC is 4.91 to the nearest hundredth using the cosine ratio.

What does trigonometry mean in plain English?

A branch of mathematics called trigonometry examines connections between triangles' sides and angles. Due to the fact that every straight-sided form can be decomposed into a group of triangles, trigonometry may be found across all of geometry. the adjacent side/hypotenuse divided by the cosine ratio

Considering the right triangle in the aforementioned figure, this means: = 35°

Nearby =? = BC

(6) Hypotenuse

Hence, cos 35 = BC/6 cos 35 6 BC = 4.91

As a result, the length of BC is 4.91 to the nearest hundredth using the cosine ratio.

Learn more about cosine ratio here:

brainly.com/question/15793827

#SPJ1


Look at the projected population pyramid 20 years in the future by selecting the year 2035 from the drop-down menu. What changes in the population do you notice in comparison to the 2015 population pyramid?

Answers

The most significant difference between the population pyramids of 2015 and 2035 is that the population in 2035 is more evenly distributed. This suggests that the population is relatively stable, with a balanced birth and death rate.

What are population pyramids used for?

A population pyramid refers to visual representation of two variables: age and gender. Demographers, who study populations, use them. A population pyramid is a graph that depicts the age distribution of a population divided down the center by male and female members.

If a portion of the population has been affected by abrupt changes, such as casualties from armed conflict, high female mortality in childbirth, or the migration of young workers out of poorer regions, the graph will provide a visual representation of how the future population will be affected.

Read more about population pyramids

brainly.com/question/2303466

#SPJ1

why did only wealthy do tourism before advances in transport​

Answers

Answer:

Because it was they who had access to water transport, but for ordinary people it was very expensive.

Answer:

Limited access to transportation: Traveling long distances was difficult and time-consuming, and the only available modes of transport, such as horses or carriages, were expensive and not accessible to everyone. This made travel a luxury that only the wealthy could afford.

a global positioning system (gps) locator at site a reveals that it is moving at 2.1 centimeters per year to the east. a second gps locator is tracking site b, which is moving at 2.0 centimeters per year to the west. what sort of plate boundary is this? radio button unchecked transform radio button unchecked convergent radio button unchecked divergent submit

Answers

This is a transform plate boundary, where two plates are sliding past each other horizontally in opposite directions, resulting in shear stress and friction along the boundary.

This is a transform plate border, which occurs when two tectonic plates move horizontally in opposing paths past each other. A transform fault, such as the San Andreas Fault in California, marks the border between these continents.

Shear tension and friction along the border are caused by the mutual motion of the plates, culminating in earthquakes and other tectonic actions. The lack of fresh crust creation or destruction at transform boundaries is characterised by the plates merely sliding past each other.

Learn more about transform plate boundary:

https://brainly.com/question/30333290

#SPJ4

Muslims in British Raj were unhappy with British rule for a variety of reasons. Which two primary reasons did the Muslims believe that they needed a separate statehood from what they considered the Hindu-Raj? Select 2 correct answer(s)

Question 1 options:

Muslims believed that the British Raj was biased towards the Hindus

The arrest of Ghandi caused the Muslim community to revolt

Muslims were able to hold positions just as their Hindu counterparts

Leaders such as Nehu rejected unified premiership offered by Ghandi

Execution of Bhutto brought renowned ire to the British Raj

Answers

The   two primary reasons did the Muslims believe that they needed a separate statehood from what they considered the Hindu-Raj are:

A. Muslims believed that the British Raj was biased towards the Hindus

D. Leaders such as Nehru rejected unified premiership offered by Gandhi,


What are the primary reasons that the Muslims believe that they needed a separate statehood?

During the British Raj in India, the Muslim community was unhappy with British rule for various reasons. One of the primary reasons was that they believed the British Raj was biased towards the Hindus.

Muslims felt that the British administration gave preferential treatment to the Hindus, who formed the majority of the population in India. This was evident in the distribution of administrative positions, where Muslims felt they were underrepresented.

Learn more about Muslim here:https://brainly.com/question/4466

#SPJ1

after sunset, what can be expected with the cooling rate of soil compared to the cooling rate of water?

Answers

Because soil is an excellent reflector, it will cool more quickly after sunset. This is predicted when comparing the cooling rates of soil and water.

With a given quantity of sun irradiation (insolation), water temperature will rise less than land temperature because water has a considerably larger heat capacity, or specific heat, than sands, soils, or other materials do. Very likely, individuals in the water are feeling colder than those who are on the beach.

This is brought on by water's high specific heat capacity. To put it another way, when the same amount of heat energy is delivered to both sand and water, the temperature of the sand will rise greater than the temperature of the water.

Learn more about cooling rate Visit: brainly.com/question/28968180

#SPJ4

screening and sedimentation to remove the larger suspended solids in sewage represents what level of sewage treatment?

Answers

The initial stages of sewer treatment, screening, and sedimentation, are known as the basic level of treatment or Preliminary therapy.

Preliminary therapy is the term used to describe this stage of care. Large suspended particles like detritus, litter, and grit are taken from the effluent during the early treatment stage through the screening process.

The effluent is then allowed to settle in a sedimentation basin, where any suspended particles are permitted to sink to the bottom.

The majority of the larger solids are removed during this process, which reduces the amount of effluent produced and keeps them from damaging the machinery used downstream or interacting with the biological treatment steps that follow.

Although primary therapy is crucial, secondary and tertiary treatment processes are usually carried out after it.

Learn more about the screening and sedimentation at

https://brainly.com/question/9675235

#SPJ4

explain how lines of latitude impact the temperature range in Asia in summer and winter

Answers

The way that lines of latitude impact the temperature range in Asia in summer and winter include:

Summer - closer to the equator gets warmer Winter - closer to the poles get colder

How can lines of latitude affect Asia's weather?

Lines of latitude, which are imaginary horizontal lines that circle the Earth parallel to the equator, can have a significant impact on the temperature range in Asia during summer and winter.

During summer in Asia, the areas located closer to the equator experience warmer temperatures than areas located further away. This is because the sun's rays are more direct at the equator, which leads to more intense heating of the Earth's surface.

During winter in Asia, the opposite is true. The areas located closer to the poles experience colder temperatures than areas located closer to the equator.

Find out more on lines of latitude at https://brainly.com/question/29171354

#SPJ1

aquifers may be characterized in part by the temporal nature of their source water. typically, which aquifers would be most likely to be depleted from over use?

Answers

Aquifers that are most likely to be depleted from overuse are those that are recharged by surface water sources such as rivers, streams, and lakes.

These aquifers rely on the regular input of surface water to replace the water that is removed through pumping. When the surface water is reduced due to drought or overuse, the aquifer can become depleted.

Aquifers that are recharged by precipitation or groundwater from other aquifers are less likely to be depleted from overuse as they rely on a more constant source of water to replenish them. However, overuse of these aquifers can still cause long-term damage and lead to depletion over time.

To know more about Aquifers, click here:

https://brainly.com/question/14916917

#SPJ4

in the lake of constance story, as the rider was on the way to the inn, what was the geographical environment?

Answers

The Lake of Constance" is the title of a novel by German author Eduard Mörike. The novel is set in the region around Lake Constance, which is located in central Europe at the northern foot of the Alps, bordered by Germany, Austria, and Switzerland.

In the Lake Constance story, the geographical environment the rider encountered while on the way to the inn was primarily characterized by a picturesque landscape with diverse features. Lake Constance itself is a large freshwater lake situated at the northern foot of the Alps, which borders Germany, Switzerland, and Austria.


The area surrounding the lake is a blend of rolling hills, lush green meadows, dense forests, and small villages.
As the rider made his way to the inn, he likely navigated through the undulating terrain and narrow roads that connected the scattered settlements in the region.

He may have also encountered vineyards and orchards along the way, as agriculture is an important aspect of the local economy. The forests in the area are home to a variety of flora and fauna, contributing to the region's overall biodiversity.

In addition, the story's setting features picturesque views of the lake and its sparkling waters, which serve as a focal point for the region's natural beauty. The shoreline of Lake Constance is peppered with charming towns and fishing villages, offering glimpses into the region's history and cultural heritage.

In summary, the geographical environment the rider experienced in the Lake Constance story included a diverse landscape of rolling hills, lush meadows, dense forests, and charming villages. The area is characterized by its agricultural activities, biodiversity, and the stunning views of Lake Constance itself.

To learn more about environment here:

https://brainly.com/question/17413226#

#SPJ11

more than half of the waste ending up in sanitary landfills. describe a potential environmental problem that could result from rain falling on a sanitary landfill

Answers

When rain falls on a sanitary landfill, it can cause a number of environmental problems. One of the main concerns is the potential for contaminated runoff or leachate to enter nearby waterways or groundwater sources.

Sanitary landfills are designed to contain and isolate waste from the surrounding environment, but they are not completely impermeable. As rainwater seeps into the landfill, it can come into contact with decomposing organic matter and other contaminants, picking up harmful chemicals and bacteria along the way. This leachate can then escape from the landfill through cracks or holes in the liner system, or through the drainage system used to collect and treat it.

If this contaminated leachate enters nearby waterways or groundwater sources, it can pollute these resources and potentially harm aquatic ecosystems, as well as human health. The leachate can contain a variety of harmful substances, including heavy metals, volatile organic compounds, and pathogens, which can lead to waterborne illnesses and other health effects. Additionally, the discharge of leachate into surface waters can contribute to the growth of harmful algal blooms and other water quality issues.

To know more about  sanitary landfill  here

https://brainly.com/question/12350334

#SPJ4

Other Questions
The answer of this question bc it showing me the answer is D $495 is 55% of what number? Percent Proportion -Percent Equation - A 1.000-g sample of iron metal reacted with sulfite powder to give 1.574 g of product. Calculate the empirical formula of iron sulfide. PLEASE HELP I WILL GIVE BRAINLYIESTWrite a linear polynomial (degree of 1) to represent the length of a rectangle. Write another linearpolynomial (degree of 1) to represent the width of a rectangle.Part A: What is the expression that represents the area of the rectangle? Show your work. (5 points)Part B: For your answer for the area of the reaction in Part A, explain its degree and classification and why ithas that degree and classification? (3 points)Part C: Explain how closure under multiplication applies to your your dimension and area in Part A. (7 points) which project management tool/method is suggested to determine the customer's opinion of a project being time or resource constrained? multiple choice question. if vector A and B has equal magnitude and A+B is three times larger than A-B what is the angle of A and B Search instead for if vector A and B has equal magnitude and A+B is 3 times larger than A-B what is the angle of A and B the concept of relative energy deficiency in sport (red-s) addresses the full range of concerns to include which information is correct regarding the major pathophysiologic process of glomerulonephritis? Please answer the question In Super Mario Bros., you become Mario, and your friend is Marios younger brother Luigi. Your job is to race through Mushroom Kingdom to save Princess Toadstool and avoid the enemy, Bowser. You can jump from and to different objects, picking up coins and other items to help you on your journey through the levels. What gameplay style and player state would this mode of Super Mario Bros. be?open-ended, cooperative gameopen-ended, multi-player gamecyclical, single-player gamelinear, multi-player game Why is Thomas stuck between his black peers and white soldiers?Glory movie QUESTION 6 of 10: What markup percentage does New York magazine state that Macy's at Herald Square in New York City uses to mark upaccessories?a) 72%b) 127%c) 185%Od) 233% rent control keeps prices of housing below market rates. which of these is an unintended consequence of rent control? a an increase in the quantity of housing available b a shortage of housing c a decrease in the price of utility expenses (electric and natural gas) for the housing d an increase in the price of utility expenses (electric motorola used the normal distribution to determine the probability of defects and the number of defects expected in a production process. assume a production process produces items with a mean weight of 11 ounces. a. the process standard deviation is , and the process control is set at plus or minus standard deviations. units with weights less than or greater than ounces will be classified as defects. what is the probability of a defect (to 4 decimals)? 0.3173 in a production run of parts, how many defects would be found (to the nearest whole number)? 16 b. through process design improvements, the process standard deviation can be reduced to . assume the process control remains the same, with weights less than or greater than ounces being classified as defects. what is the probability of a defect (to 4 decimals)? in a production run of parts, how many defects would be found (to the nearest whole number)? c. what is the advantage of reducing process variation, thereby causing a problem limits to be at a greater number of standard deviations from the mean? Kim receives 4 stickers more than Jim. If Kim receives 20 stickers, What is the ratio of Kims stickers to Kims stickers? How many stickers must Kim receive if Jim gets 60 stickers? In cyclic quadrilateral PQRS,[tex]\frac{\ \textless \ P}{3} =\frac{\ \textless \ Q}{4}=\frac{\ \textless \ R}{5}[/tex]Find the largest angle in quadrilateral PQRS, in degrees. (" Identify and name two language varieties in South Africa.Provide examples of text s. how did the invention of the windmill and the cotton gin impact commercial farming in the texas what kind of companies are likely to use optical cables such as an oc-48 or oc-192? why? can you give an example? g suppose that a study finds a strong positive correlation between acupuncture treatments and recovery of patients from, say, cocaine addiction. however, also assume that there is no known mechanism of action (i.e., how acupuncture could cure addiction) that can explain the correlation. can we conclude that acupuncture is definitely responsible for the patients' recovery? group of answer choices yes. the patients stated afterwards that they knew it had helped, and these people know their own bodies better than we do. no. acupuncture may be responsible for the healing, or it may not. correlation does not necessarily imply causation. no. acupuncture is hippie, new age stuff, and is not respected by reputable doctors. yes. if the study was run by qualified m.d.s, then we should respect their findings that acupuncture cured these patients.