The main parameters affecting the wind load on buildings include building height, shape, orientation, terrain, and wind speed. Building designers need to consider these parameters when designing structures to ensure that they can withstand the forces of wind and other natural elements.
Wind load on buildings is one of the most important considerations in building design. This is because wind can cause significant damage to structures if they are not designed properly. There are several main parameters that affect the wind load on buildings. These include building height, shape, orientation, terrain, and wind speed.
Building height: The height of a building is one of the most important parameters affecting wind load. The higher the building, the greater the wind load will be. This is because wind speed increases with height, and the surface area of the building that is exposed to the wind also increases.
Building shape: The shape of a building can have a significant impact on wind load. Buildings that are rectangular or square in shape are generally more resistant to wind loads than those with irregular shapes. This is because square and rectangular buildings have fewer surfaces that are perpendicular to the wind direction.
Building orientation: The orientation of a building is also an important parameter affecting wind load. Buildings that are perpendicular to the prevailing wind direction will experience the highest wind loads. Buildings that are oriented at an angle to the wind will experience lower wind loads.
Terrain: The terrain surrounding a building can have a significant impact on wind load. Buildings located in areas with flat terrain will experience higher wind loads than those located in hilly or mountainous areas. This is because the terrain can cause turbulence in the wind, which can increase wind speed and wind load.
Wind speed: Wind speed is the most important parameter affecting wind load. The higher the wind speed, the greater the wind load will be. Wind speed is affected by factors such as the building location, topography, and the surrounding environment.
In conclusion, the main parameters affecting the wind load on buildings include building height, shape, orientation, terrain, and wind speed. Building designers need to consider these parameters when designing structures to ensure that they can withstand the forces of wind and other natural elements.
A carefully planned design can help to minimize the impact of wind on a building, ensuring its durability and safety.
To know more about terrain, visit:
https://brainly.com/question/29741592
#SPJ11
Please please please please please please please SOMONE help please
Answer:
all real numbers greater than or equal to 2
Step-by-step explanation:
the range of a function is the values that y can have.
the minimum value of y is at y = 2
the solid blue circle indicates that y can equal 2.
above y = 2 the values of y keep increasing
range is y ≥ 2 , y ∈ R
A vertical curve has an initial grade of 4.2% that connects to another grade of 2.4%. The vertex is located at station 12+00 with an elevation of 385.28 m. The beginning point of curvature is located at station 9+13 and the ending point of the curve is located at station 14+26
A vertical curve is the curve formed by the connection of two straight grades. It is used to connect two different gradients together with a gradual slope.
The initial grade of the vertical curve is 4.2%, and the ending grade is 2.4%.The curve is symmetrical, implying that the initial and final grades are equal. The vertex is located at station 12+00 and has an elevation of 385.28m.The beginning point of curvature is located at station 9+13, and the ending point of the curve is located at station 14+26.To construct the vertical curve, the following steps are taken:
Step 1: Calculate the K value using the following formula: K = (l / R) ^ 2 * 100, where l is the length of the curve and R is the radius of the curve.
Step 2: Determine the elevations of the PVC and PVT using the following formulas:
PVC = E1 + (K / 200) * L1PVT
= E2 + (K / 200) * L2
where E1 and E2 are the elevations of the initial and ending points, L1 and L2 are the lengths of the grades, and K is the K value calculated in Step 1.
Step 3: Determine the elevations of the VPC and VPT using the following formulas:
VPC = PVC + (L1 / 2R) * 100VPT
= PVT - (L2 / 2R) * 100
where R is the radius of the curve, L1 is the length of the initial grade, and L2 is the length of the ending grade.
Step 4: Calculate the elevations at any given station along the curve using the following formula:
y = E + (K / 200) * (x - x1) * (x - x2)
where E is the elevation at the vertex, x is the station location, x1 is the station location of the PVC, x2 is the station location of the PVT, and y is the elevation at the station x.
To know more about vertical curve visit:
https://brainly.com/question/15274197
#SPJ11
A hydrocarbon (a compound consisting solely of carbon and hydrogen) is found to be 85.6% carbon by mass. What is the empirical formula for this compound? What will the molecular formula look like? What other information do you need in order to find the exact molecular formula?
The empirical formula for the given hydrocarbon compound is CH₂. The molecular formula would have a 1:2 ratio of carbon to hydrogen. Additional information, such as the molar mass of the compound, is needed to determine the molecular formula.
The empirical formula of a compound represents the simplest whole-number ratio of the atoms present in the compound. To find the empirical formula of the given hydrocarbon compound, we need to determine the ratio of carbon to hydrogen.
Given that the compound is 85.6% carbon by mass, we can assume that we have 100 grams of the compound. This means that there are 85.6 grams of carbon and 14.4 grams of hydrogen in the compound.
To find the ratio, we need to convert the mass of each element to moles by dividing it by their respective atomic masses. The atomic mass of carbon is 12.01 g/mol, and the atomic mass of hydrogen is 1.01 g/mol.
Moles of carbon = 85.6 g / 12.01 g/mol = 7.13 mol
Moles of hydrogen = 14.4 g / 1.01 g/mol = 14.3 mol
Now, we need to simplify the ratio by dividing both moles of carbon and hydrogen by the smaller value. The ratio of carbon to hydrogen is approximately 1:2.
So, the empirical formula of the compound is CH₂.
The molecular formula represents the actual number of atoms of each element present in a molecule. To determine the molecular formula, we need additional information such as the molar mass of the compound.
The molar mass of the compound can be determined experimentally or provided in the question. Once we know the molar mass, we can compare it to the empirical formula mass (the sum of the atomic masses in the empirical formula) to determine the number of empirical formula units in the molecular formula.
For example, if the molar mass of the compound is found to be 84 g/mol, we can divide it by the empirical formula mass (12.01 + 2.02 = 14.03 g/mol) to find that the molecular formula consists of approximately six empirical formula units. Therefore, the molecular formula would be C₆H₁₂.
Learn more about empirical formula here: https://brainly.com/question/29416729
#SPJ11
Help yalll I really need help major time
Answer:
Annalise is correct because the outputs are closest when x = 1.35
Step-by-step explanation:
The solution to the equation 1/(x-1) = x² + 1 means the one x value that will make both sides equal. If we look at the table, notice how when x = 1.35, f(x) values are closest to each other for both equations, signifying that x = 1.35 is approximately the solution. Thus, Annalise is correct.
The maximum shearing stress due to bending occurs at... the top/bottom surface of the beam._____ the section of maximum moment._____ the neutral surface of the beam.
In a beam, the maximum shearing stress due to bending occurs at the top/bottom surface of the beam. The section of maximum moment is perpendicular to the neutral surface of the beam.''
A beam is a structural element that resists loads that are applied transverse to its length, typically applied perpendicular to the longitudinal axis of the beam.In simple terms, the beam is designed to support load forces that are applied perpendicular to the axis of the beam. Beams are used in the construction of buildings, bridges, and other engineering structures.
In this case, the maximum shearing stress due to bending occurs at the top/bottom surface of the beam. Additionally, the section of maximum moment is perpendicular to the neutral surface of the beam.
To know more about shearing stress visit:
https://brainly.com/question/20630976
#SPJ11
This is a linear algebra project and I have to write a programming C or python to fulfill the task.
Project B: Cubic Spline project The user inputs six points, whose x-coordinates are equally spaced. The programme generates the equations for the cubic spline with parabolic runout connecting these six points.
To fulfill the Cubic Spline project task, you can write a program in either C or Python that takes as input six points with equally spaced x-coordinates. The program should then generate the equations for a cubic spline with parabolic runout that connects these six points. The cubic spline is a piecewise-defined function that consists of cubic polynomials on each interval between adjacent points, ensuring smoothness and continuity.
To implement the Cubic Spline project, you can follow these steps:
Input: Prompt the user to enter six points, each containing x and y coordinates. Ensure that the x-coordinates are equally spaced.
Calculation of Coefficients: Use the given points to calculate the coefficients of the cubic polynomials for each interval. You can utilize interpolation techniques, such as the tridiagonal matrix algorithm or Gaussian elimination, to solve the system of equations and determine the coefficients.
Constructing the Spline: With the obtained coefficients, construct the cubic spline function by defining the piecewise cubic polynomials for each interval. The cubic polynomials should satisfy the conditions of smoothness and continuity at the points of connection.
Parabolic Runout: Modify the spline near the endpoints to ensure parabolic runout. This means that the first and second derivatives at the endpoints are equal, resulting in a parabolic shape beyond the data points.
Output: Display or print the equations of the cubic spline with parabolic runout, indicating the intervals and corresponding coefficients.
By following these steps, your program will generate the equations for the cubic spline with parabolic runout connecting the six input points, satisfying the requirements of the project.
To learn more about derivatives visit:
brainly.com/question/32963989
#SPJ11
grams of water starts boiling (at 100°C), the other beaker is at a temperature of 27.7 °C. Heating continues and when the last trace of water is vaporized from the smaller sample of water, the temperature of the 100.0 gram sample of water is 56.0°C. Calculations - Heat of Vaporization of Liquid Water 1. How many calories of heat were absorbed by the 100.0 g sample of water as the temperature increased from 27.7°C to 56.0°C? Given: Heat = (grams of water) (1.00 calorie/g °C)(AT) (answer: 2,830 cal.) 2. Assuming that the 5.0 g sample of water absorbed the same amount of heat energy as calculated in #1 (above), what is the heat of vaporization of water in the units calories-per-gram? (answer: 566 = 570 cal./g) 3. Convert calories-per-gram (#2, above) into kilocalories-per-mole. (recall: 1 kilocalorie - 1000 calories, 1 mole ice - 18 grams) 10 kcal/mole) 4. Suppose you had 1.00 kilogram of boiling hot water (100°C) in a pot, on a stove. How much additional heat would be necessary to vaporize all of the water? (answer: 560 - 570 kcal) 5. How many calories are needed to convert 50.0 grams of liquid water at 25°C into steam at 100°C? (answer: (hint-There are two steps.) 3,750+ 28,500 cal 32,250 cal.)
The total number of calories needed is,Q = Q1 + Q2 = 3,750 cal + 28,500 cal = 32,250 cal .
Mass of water (m) = 100.0 g
Specific heat of water (c) = 1.00 cal/g °C
Change in temperature (ΔT) = 56.0°C - 27.7°C = 28.3°C
The heat absorbed by the water can be calculated using the formula:
Q = m * c * ΔT
Q = (100.0 g) * (1.00 cal/g °C) * (28.3°C)
Q = 2,830 cal
Therefore, the amount of heat absorbed by the 100.0 g sample of water is 2,830 cal.
Calculation of Heat of Vaporization of Water:
Mass of water (m) = 5.0 g
Heat absorbed (Q) = 2,830 cal
The heat of vaporization of water can be calculated using the formula:
Q = m * Hv
Hv = Q / m
Hv = 2,830 cal / 5.0 g
Hv = 570 cal/g
Therefore, the heat of vaporization of water is 570 cal/g.
Conversion to Kilocalories-per-Mole:
Conversion factor: 1 cal/g = 4.184 J/g and 1 kcal = 4,184 J
Converting the heat of vaporization from calories per gram to joules per gram:
570 cal/g = (570 cal/g) * (4.184 J/cal) = 2,388.48 J/g
Converting the heat of vaporization from joules per gram to joules per mole:
2,388.48 J/g = (2,388.48 J/g) * (18.02 g/mol) = 43,009.6 J/mol
Converting the heat of vaporization from joules per mole to kilocalories per mole:
43,009.6 J/mol = 43.01 kJ/mol = 10.29 kcal/mol
Therefore, the heat of vaporization of water is 10 kcal/mol.
Additional Heat Required for Vaporization:
Mass of water (m) = 1.00 kg
Heat of vaporization of water (Hv) = 540 kcal/kg
The additional heat required to vaporize all of the water can be calculated as:
Q = m * Hv
Q = (1.00 kg) * (540 kcal/kg)
Q = 540 kcal
Therefore, the additional heat necessary to vaporize all of the water is 540 kcal.
Calculation of Calories Required for Phase Change:
Mass of water (m) = 50.0 g
Specific heat of water (c) = 1.00 cal/g °C
Change in temperature (ΔT) = 100.0°C - 25.0°C = 75.0°C
Heat of vaporization of water (Hv) = 570 cal/g
Step 1: Calculation of heat required to raise the temperature of water to its boiling point:
Q1 = m * c * ΔT
Q1 = (50.0 g) * (1.00 cal/g °C) * (75.0°C)
Q1 = 3,750 cal
Step 2: Calculation of heat required to vaporize the water at its boiling point:
Q2 = m * Hv
Q2 = (50Step 2: The number of calories needed to vaporize the water at 100°C is given by,Q2 = (50.0 g) (570 cal/g)Q2 = 28,500 cal
Therefore, the total number of calories needed is, Q = Q1 + Q2 = 3,750 cal + 28,500 cal = 32,250 cal.
Learn more about heat absorbed:
brainly.com/question/30836915
#SPJ11
Solve for BC.
Round your answer to the nearest tenth.
Please help due today!!
Step-by-step explanation:
In RIGHT triangles such as this one
sin Φ = opposite leg / hypotenuse
for THIS right triangle
sin (54.2) = BC / 30 re-arrange
30 * sin (54.2) = BC <=====use calculator to finish
The number of spherical nodes in 3p orbitals is (b) three (a) one (d) zero two In which of the following orbitals is there zero probability of finding the electron in the xy plane? (a) Px (b) dyz (c) dx²-y² (d) Pz
The number of spherical nodes in 3p orbitals is 1 and the orbital in which there is zero probability of finding the electron in the xy plane is Pz.
In quantum mechanics, the atomic orbital is a region of space where there is a high probability of finding an electron. There are four types of atomic orbitals, including s, p, d, and f orbitals.
The p orbitals are divided into three distinct regions of space that are oriented in a specific direction.
In 3p orbitals, the number of spherical nodes is one. The spherical node is defined as the region of space where the probability of finding the electron is zero. In 3p orbitals, there is one spherical node present.
The spherical node is located at the nucleus. It is worth mentioning here that the number of nodal planes increases with the increase in the principal quantum number, n.
Additionally, each p orbital contains one nodal plane.In the Px orbital, there is a zero probability of finding the electron in the yz plane.
Similarly, in the dyz orbital, there is zero probability of finding the electron in the xy plane. In the dx²-y² orbital, there is zero probability of finding the electron in the z-axis.
However, in the Pz orbital, there is a zero probability of finding the electron in the xy plane. Therefore, option (d) is the correct answer.
The number of spherical nodes in 3p orbitals is 1, and the Pz orbital has zero probability of finding the electron in the xy plane.
To know more about probability visit:
brainly.com/question/31828911
#SPJ11
Which quadrilateral makes this statement true?
Answer:
Quadrilateral CBAD
Step-by-step explanation:
Because of symmetry, the following pairs of sides are congruent:
AB and CB
AD and CD
Answer: Quadrilateral CBAD
The current exchange rates show that C$1.00=£0.6370. If you have C$250, what is the equivalent amount in British pounds? a. £392.46 b. £105 C. £159.25 d. £430.97 e. £200
The current exchange rates show that C$1.00=£0.6370, the equivalent amount in British pounds for C$250 will be c. £159.25.
To find the equivalent amount in British pounds for C$250, we can use the given exchange rate:
C$1.00 = £0.6370
We need to multiply C$250 by the exchange rate to convert it into British pounds:
£ = C$250 * £0.6370
Calculating:
£ ≈ 250 * 0.6370
£ ≈ 159.25
Therefore, the equivalent amount in British pounds for C$250 is approximately £159.25.
Learn more about equivalent amount :
https://brainly.com/question/2972832
#SPJ11
4.00 g of NaOH are dissolved in water to make 2.00 L of
solution. What is the concentration of hydronium ions, [H3O+] , in
this solution? Express your answer with the appropriate units.
The concentration of hydronium ions ([H3O⁺]) in the given solution is 0.05 M.
To find the concentration of hydronium ions ([H3O⁺]) in the solution, we first need to calculate the number of moles of NaOH in the given 4.00 g and then use stoichiometry to determine the concentration of [H3O⁺].
Calculate the moles of NaOH:
Molar mass of NaOH (sodium hydroxide) = 22.99 g/mol (Na) + 16.00 g/mol (O) + 1.01 g/mol (H) = 40.00 g/mol
Number of moles of NaOH = Mass of NaOH / Molar mass of NaOH
Number of moles of NaOH = 4.00 g / 40.00 g/mol = 0.10 mol
Determine the number of moles of H3O+ ions produced:
Since NaOH is a strong base, it dissociates completely in water to form hydroxide ions (OH⁻) and sodium ions (Na⁺).
The balanced equation for the dissociation of NaOH in water is:
NaOH → Na⁺ + OH⁻
Since NaOH dissociates in a 1:1 ratio, the number of moles of OH⁻ ions produced is also 0.10 mol.
Calculate the concentration of H3O⁺ ions:
In a neutral solution, the concentration of hydronium ions ([H3O⁺]) is equal to the concentration of hydroxide ions ([OH⁻]), and both are related to the molarity of the solution.
Molarity (M) = Number of moles of solute / Volume of solution (in L)
Molarity of OH⁻ ions = 0.10 mol / 2.00 L = 0.05 M
Since [H3O⁺] = [OH⁻] in a neutral solution, the concentration of hydronium ions is also 0.05 M.
Therefore, the concentration of hydronium ions ([H3O⁺]) in the given solution is 0.05 M.
To know more about concentration click here:
brainly.com/question/10720472
#SPJ11
List the interval(s) on which the function is increasing: _______
List the interval(s) on which the function is decreasing: _______
The intervals of the function in this problem are given as follows:
Increasing: (-∞, -1) U (2, ∞). Decreasing: (-1,2).When a function is increasing and when it is decreasing, looking at it's graph?Looking at the graph, we get that a function f(x) is increasing when it is "moving northeast", that is, to the right and up on the graph, meaning that when the input variable represented x increases, the output variable represented by y also increases.Looking at the graph, we get that a function f(x) is decreasing when it is "moving southeast", that is, to the right and down the graph, meaning that when the input variable represented by x increases, the output variable represented by y decreases.More can be learned about graphs and functions at https://brainly.com/question/12463448
#SPJ1
We
have a group consists of n words. There are three words in the
group that starts with the same letter.
Answer the questions below:
a) find the smallest value for n that has this property.
Answer: the smallest value of "n" that satisfies the condition is 53.
To find the smallest value for "n" where a group of words contains three words that start with the same letter, we can consider the worst-case scenario.
Assuming each word starts with a different letter, we can start by looking at the alphabet. The English alphabet has 26 letters.
For the first word, we have 26 choices for the starting letter.
For the second word, we also have 26 choices since it can start with any letter, including the same letter as the first word.
For the third word, it must start with the same letter as the first two words. Therefore, we only have 1 choice for the starting letter.
So, to find the smallest value of "n," we need to add the number of choices for each word together.
1st word: 26 choices
2nd word: 26 choices
3rd word: 1 choice
Adding these together, we have:
26 + 26 + 1 = 53
Therefore, the smallest value of "n" that satisfies the condition is 53.
Learn more about probability calculations here:
https://brainly.com/question/25839839
#SPJ11
a) The population of Suffolk County, NY is projected to be 1,534,811 in the
year 2040. In the year 2000, the average per capita water use in Suffolk County was 112
gallons per person per day. What is the estimated water use (in million gallons per day) in
Suffolk County in 2040 if water conservation efforts reduce per capita water use by 15%
compared to the year 2000?
b) In the year 2000, Public Water Systems in the State of New York supplied
2560 million gallons of water per day to 17.1 million people for both domestic and
industrial use. what is the average per capita sewage flow in New York assuming a return
of 67% of the supply?
a) The average per capita sewage flow in New York is 100 gallons per person per day.
b) The estimated water use in Suffolk County in 2040 is approximately 146,221,067.2 gallons per day.
a) To find the estimated water use in Suffolk County in 2040, we need to consider the projected population and the change in per capita water use compared to the year 2000.
First, we calculate the reduction in per capita water use by multiplying the average per capita water use in 2000 (112 gallons per person per day) by 15% (0.15).
112 gallons/day * 0.15 = 16.8 gallons/day
Next, we subtract this reduction from the average per capita water use in 2000 to find the estimated per capita water use in 2040.
112 gallons/day - 16.8 gallons/day = 95.2 gallons/day
Finally, we multiply the estimated per capita water use in 2040 (95.2 gallons/day) by the projected population of Suffolk County in 2040 (1,534,811 people) to find the estimated water use in Suffolk County in 2040.
95.2 gallons/day * 1,534,811 people = 146,221,067.2 gallons/day
Therefore, the estimated water use in Suffolk County in 2040 is approximately 146,221,067.2 gallons per day.
b) To find the average per capita sewage flow in New York, we need to calculate the return of the water supply and divide it by the number of people.
First, we calculate the return of the water supply by multiplying the total water supplied by the return rate of 67%.
2560 million gallons/day * 0.67 = 1715.2 million gallons/day
Next, we divide the return of the water supply by the number of people to find the average per capita sewage flow.
1715.2 million gallons/day / 17.1 million people = 100 gallons/person/day
Therefore, the average per capita sewage flow in New York is 100 gallons per person per day.
To learn more about average
https://brainly.com/question/10348200
#SPJ11
FOR n=2 prove it
Use mathematical induction to prove 2+6+18+...+2x3 =3"-1 for n=1,2 (LHR on he neglected, then show tha
Given the series `, the aim is to prove the statement `3^n - 1` fo`.The formula to be proved is n = 3^n - 1`.
First, check whether the formula is true for `n = 1`.
When `n = 1`,
we have `2 + 6 = 8` and
3^1 - 1 = 2`.
The formula is true for `
n = 1`.
Now, assume that the formula is true for `n = k`.
That is, we have`2 + 6 + 18 + ... + 2 × 3^k = 3^k - 1`.
Now, let's prove that the formula is also true for `n = k + 1`.
Therefore, for `n = k + 1`,
we have `2 + 6 + 18 + ... + 2 × 3^k + 2 × 3^(k + 1)`
Taking the formula that was assumed earlier for `n = k`,
we can replace the left-hand side of the above equation with `
3^k - 1`.
So we have `
3^k - 1 + 2 × 3^(k + 1)`
3^k - 1 + 2 × 3 × 3^k`
Simplify by adding the `3` and the `k` exponents.
`3^k - 1 + 2 × 3^(k + 1)`
Simplify by combining like terms and rearranging.
`3 × 3^k - 1 + 3^k - 1`
Now, we have
`3 × 3^k + 3^k - 2`.
To know more about series visit:
https://brainly.com/question/33356238
#SPJ11
The equation 2 + 6 + 18 + ... + 2x3 = 3^n - 1 is proven by mathematical induction for n = 1, 2.
To prove the given equation 2 + 6 + 18 + ... + 2x3 = 3^n - 1 for n = 1, 2 using mathematical induction, we need to follow these steps:
Step 1: Base case
For n = 1, we substitute n into the equation:
2 = 3^1 - 1
2 = 3 - 1
2 = 2
The equation holds true for n = 1.
Step 2: Inductive hypothesis
Assume that the equation holds true for some k = m:
2 + 6 + 18 + ... + 2x3 = 3^m - 1
Step 3: Inductive step
We need to prove that the equation holds true for k = m + 1:
2 + 6 + 18 + ... + 2x3 + 2x3^2 = 3^(m+1) - 1
To do this, we start with the left-hand side (LHS) of the equation for k = m + 1:
LHS = 2 + 6 + 18 + ... + 2x3 + 2x3^2
By the inductive hypothesis, we can rewrite the LHS as:
LHS = 3^m - 1 + 2x3^2
Using the formula for the sum of a geometric series, we can simplify the LHS further:
LHS = 3^m - 1 + 2x3^2
= 3^m - 1 + 18
= 3^m + 17
Now, let's look at the right-hand side (RHS) of the equation for k = m + 1:
RHS = 3^(m+1) - 1
By expanding the RHS, we get:
RHS = 3^m x 3 - 1
= 3^(m+1) - 1
The LHS and RHS are equal, so the equation holds true for k = m + 1.
Therefore, the equation 2 + 6 + 18 + ... + 2x3 = 3^n - 1 is proven by mathematical induction for n = 1, 2.
Learn more about mathematical induction
https://brainly.com/question/29503103
#SPJ11
Find y as a function of t if with y(0) = 7, y'(0) = 7. y = 1600y" - 9y = 0
Given the differential equation y = 1600y" - 9y = 0, with initial conditions y(0) = 7 and y'(0) = 7, we need to find y as a function of t.
To solve the differential equation, we can assume a solution of the form y = e^(rt), where r is a constant. We substitute this solution into the equation to find the characteristic equation:
1600r^2e^(rt) - 9e^(rt) = 0.
Factoring out e^(rt) gives us:
e^(rt)(1600r^2 - 9) = 0.
For this equation to hold, either e^(rt) = 0 (which is not possible) or 1600r^2 - 9 = 0.
Solving 1600r^2 - 9 = 0, we find r = ±3/40.
Using these values of r, the general solution to the differential equation is:
y(t) = Ae^(3t/40) + Be^(-3t/40),
where A and B are constants determined by the initial conditions.
Using the given initial condition y(0) = 7, we can substitute t = 0 and y = 7 into the general solution:
7 = Ae^(0) + Be^(0),
7 = A + B.
Using the other initial condition y'(0) = 7, we differentiate the general solution:
y'(t) = (3A/40)e^(3t/40) - (3B/40)e^(-3t/40).
Substituting t = 0 and y'(0) = 7 into this expression, we have:
7 = (3A/40)e^(0) - (3B/40)e^(0),
7 = (3A/40) - (3B/40).
From these equations, we can solve for A and B. Upon finding their values, we substitute them back into the general solution y(t) to obtain y as a function of t.
Therefore, the final result is y(t) = ... (expression involving constants A and B).
Learn more about function: brainly.com/question/11624077
#SPJ11
Given the differential equation y = 1600y" - 9y = 0, with initial conditions y(0) = 7 and y'(0) = 7, we need to find y as a function of t.
To solve the differential equation, we can assume a solution of the form y = e^(rt), where r is a constant. We substitute this solution into the equation to find the characteristic equation:
1600r^2e^(rt) - 9e^(rt) = 0.
Factoring out e^(rt) gives us:
e^(rt)(1600r^2 - 9) = 0.
For this equation to hold, either e^(rt) = 0 (which is not possible) or 1600r^2 - 9 = 0.
Solving 1600r^2 - 9 = 0, we find r = ±3/40.
Using these values of r, the general solution to the differential equation is:
y(t) = Ae^(3t/40) + Be^(-3t/40),
where A and B are constants determined by the initial conditions.
Using the given initial condition y(0) = 7, we can substitute t = 0 and y = 7 into the general solution:
7 = Ae^(0) + Be^(0),
7 = A + B.
Using the other initial condition y'(0) = 7, we differentiate the general solution:
y'(t) = (3A/40)e^(3t/40) - (3B/40)e^(-3t/40).
Substituting t = 0 and y'(0) = 7 into this expression, we have:
7 = (3A/40)e^(0) - (3B/40)e^(0),
7 = (3A/40) - (3B/40).
From these equations, we can solve for A and B. Upon finding their values, we substitute them back into the general solution y(t) to obtain y as a function of t.
Therefore, the final result is y(t) = ... (expression involving constants A and B).
Learn more about function: brainly.com/question/11624077
#SPJ11
The catchment can be divided into three 5-min isochrone zones. From the upstream to downstream, the areas of these zones are 0.03 km², 0.06 km², and 0.01 km², respectively. Determine and plot the direct runoff hydrograph before and after urbanization using the 20-year excess rainfall hyetographs obtained in (b). Comment on the influence of urbanization on the excess rainfall and direct runoff.
Urbanization can affect the natural drainage patterns and increase the volume and velocity of runoff, potentially leading to increased flood risk downstream. It's important to implement appropriate stormwater management strategies and infrastructure to mitigate the negative impacts of urbanization on the hydrological system.
To determine the direct runoff hydrograph before and after urbanization, we need the 20-year excess rainfall hyetographs obtained in part (b). However, as part (b) is not provided in your question, I'll assume you have the necessary data for the 20-year excess rainfall hyetographs.
Before urbanization, we have three isochrone zones with areas of 0.03 km², 0.06 km², and 0.01 km² from upstream to downstream. Let's assume the excess rainfall hyetographs for these zones are H1(t), H2(t), and H3(t) respectively. The direct runoff hydrograph can be obtained by convolving each excess rainfall hyetograph with the unit hydrograph for the corresponding zone.
Let's denote the unit hydrographs as U1(t), U2(t), and U3(t) for the three zones. Then the direct runoff hydrograph before urbanization can be calculated as:
Q(t) = (H1(t) * U1(t)) + (H2(t) * U2(t)) + (H3(t) * U3(t))
After urbanization, the areas of the isochrone zones might change due to changes in land use and surface conditions. Let's assume the new areas for the zones are A1, A2, and A3. The excess rainfall hyetographs may remain the same or change based on local conditions. Using the same convolving process, we can calculate the direct runoff hydrograph after urbanization:
Q'(t) = (H1(t) * U1(t)) + (H2(t) * U2(t)) + (H3(t) * U3(t))
To plot the hydrographs, we need specific values for the excess rainfall hyetographs and the unit hydrographs. Without that information, it's not possible to provide a precise plot. However, you can plot the hydrographs by assigning values to the time variable 't' and using the formulas above.
Regarding the influence of urbanization on excess rainfall and direct runoff, it depends on the changes in land use and surface conditions. Urbanization often leads to increased impervious surfaces like roads, buildings, and parking lots, which reduce infiltration and increase surface runoff. This generally results in higher peak flows and shorter time to peak. The increased imperviousness can also alter the shape of the hydrograph, making it more flashy.
Furthermore, urbanization can affect the natural drainage patterns and increase the volume and velocity of runoff, potentially leading to increased flood risk downstream. It's important to implement appropriate stormwater management strategies and infrastructure to mitigate the negative impacts of urbanization on the hydrological system.
Learn more about infrastructure
https://brainly.com/question/869476
#SPJ11
The student council decided to spend $170 of their $1,000 budget on decorations. What fraction represents the amount of money spent on decorations?
Answer:
[tex]\frac{17}{100}[/tex]
Step-by-step explanation:
[tex]\frac{170}{1000}[/tex] simplified give you [tex]\frac{17}{100}[/tex]
As a fraction it is: [tex]\frac{17}{100}[/tex]
As a decimal it is: 0.17
As a percentage it is: 17%
Explain how waste incineration for MSW treatment emits anthropogenic GHG.
It is imperative to control and limit the amount of waste that is incinerated to reduce greenhouse gas emissions.
Waste incineration is one of the prevalent technologies of municipal solid waste (MSW) treatment that helps in reducing the volume of waste. The process involves burning organic waste at high temperatures, thereby reducing the quantity of solid waste that needs to be dumped. However, the process of waste incineration is not environmentally friendly. It emits anthropogenic GHG, such as carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O).
These gases are the primary cause of the greenhouse effect, which causes the rise in global temperature. The waste that is burned releases methane gas, which is over 20 times more potent than carbon dioxide when it comes to causing the greenhouse effect.
Waste incineration also releases carbon dioxide, a greenhouse gas, into the atmosphere, which contributes to the greenhouse effect and global warming.
Nitrous oxide is also released into the air when waste is burned, which is a potent greenhouse gas that can remain in the atmosphere for up to 150 years.
Therefore, it is imperative to control and limit the amount of waste that is incinerated to reduce greenhouse gas emissions.
To know more about greenhouse effect, visit:
https://brainly.com/question/13390232
#SPJ11
Which of the following explanations / definitions for a topographic map is NOT correct A)Topographic maps are a valuable source of information both above and below water. Detail varies greatly but if a tackle store has a hydrographic chart or map of a lake you will be boating and fishing, pick one up and study it. B) A topographic map displays the physical shape and features on the surface of the earth usually in two-dimensional form using a plan view. This type of map would show the shape of the land as well as other natural features. C)A map showing topographic features, usually by means of contour lines. D)Topographic maps are suitable for a wide variety of applications, starting from emergency management, urban planning, surveying, resource development, to camping, canoeing, hunting and fishing. Thos maps represent the earth's features accurately and to scale, on a two-dimensional surface.
The correct answer is A) Topographic maps are a valuable source of information both above and below water.
A topographic map is a type of map that displays the physical shape and features on the surface of the Earth. It typically shows the shape of the land, including elevation, using contour lines. Topographic maps are valuable tools for various applications, such as emergency management, urban planning, surveying, resource development, camping, canoeing, hunting, and fishing. These maps accurately represent the Earth's features to scale on a two-dimensional surface.
Option A states that topographic maps are a valuable source of information both above and below water. However, this statement is not correct. Topographic maps primarily focus on the land surface and do not provide detailed information about underwater features or bathymetry. For information on underwater features, hydrographic charts or maps are used, which are specifically designed for mapping the features of bodies of water.
Therefore, the correct answer is A) Topographic maps are a valuable source of information both above and below water.
To learn more about map
https://brainly.com/question/27806468
#SPJ11
Let W={(a,b,0,b):a,b∈R} with the standard operations in R^4. Which of the following statements is true? W is not a subspace of R^4 because (0,0,0,0)∈/W W is a subspace of R^4 The above is true The above is true None of the mentioned (1,1,1,1)∈W
W is a subspace of R^4.
Why is W a subspace of R^4?To determine if W is a subspace of R^4, we need to check if it satisfies the three properties of a subspace: closure under addition, closure under scalar multiplication, and contains the zero vector (0, 0, 0, 0).
1. Closure under addition: For any two vectors (a, b, 0, b) and (c, d, 0, d) in W, their sum is (a + c, b + d, 0, b + d), which is also in W. So, W is closed under addition.
2. Closure under scalar multiplication: For any scalar k and vector (a, b, 0, b) in W, k(a, b, 0, b) = (ka, kb, 0, kb), which is also in W. Thus, W is closed under scalar multiplication.
3. Contains the zero vector: W contains the zero vector (0, 0, 0, 0).
Since W satisfies all three properties, it is a subspace of R^4.
Learn more about subspace
brainly.com/question/26727539
#SPJ11
PARIS
Dear Miguel,
I'm having a great
time in Paris.
Yesterday I saw the
Eiffel Tower.
See you soon!
Gloria
PARIS
90 09 2013
FRANCE
OLPER-1 Red
............................................................
— b-
Write and simplify an expression to represent
he perimeter of the postcard.
Miguel Martinez
123 Any Street
Any Town, USA
How do you find the perimeter of a rectangle?
4 in.
-3 in.-
1
8 Write an expression in simplest form to
represent the area of the postcard below.
How do you find the area of a rectangle?
Help me please
An expression to represent the perimeter of the postcard is 2 PARIS90 + 18. An expression to represent the area of the postcard is 810. The perimeter of the postcard is 2 PARIS90 + 18, and the area of the postcard is 810.
To find the perimeter of a rectangle, add the lengths of all four sides.
The postcard has two sides of length PARIS90 and two sides of length 09.
Hence, the perimeter P is:P = PARIS90 + PARIS90 + 09 + 09Perimeter P = 2 PARIS90 + 18.
In this way, an expression to represent the perimeter of the postcard is 2 PARIS90 + 18.
Thus, this is the required answer to the question asked.
To find the area of a rectangle, multiply its length by its width.
The dimensions of the postcard are PARIS90 and 09.
So, the area A of the postcard is given by: A = PARIS90 × 09Area A = 810.
In this way, an expression to represent the area of the postcard is 810.
Thus, this is the required answer to the question asked.
Hence, the perimeter of the postcard is 2 PARIS90 + 18, and the area of the postcard is 810.
For more questions on perimeter
https://brainly.com/question/19819849
#SPJ8
(a) Find the equation of the sphere which touches the sphere x+y+z²+2x+6y+1 = 0 at the point (1,2-2) and passes through the origin. (b) Find the equation of the cone whose vertex is at the point (1, 1, 3) and which passes through the ellipse 4x² + 2 = 1, y = 4.
The equation of the sphere that touches the sphere x+y+z²+2x+6y+1 = 0 at the point (1,2,-2) and passes through the origin is:
(x - 1)² + (y - 2)² + (z + 2)² = 45
To find the equation of the sphere, we need to determine its center and radius. Given that the sphere touches the given sphere at the point (1,2,-2), the center of the new sphere will also be (1,2,-2).
To find the radius, we can calculate the distance between the center of the new sphere and the origin (0,0,0). Using the distance formula, the radius is equal to the square root of the sum of the squares of the differences in coordinates:
Radius = √((1 - 0)² + (2 - 0)² + (-2 - 0)²)
= √(1 + 4 + 4)
= √9
= 3
Substituting the center and radius into the general equation of a sphere, we get:
(x - 1)² + (y - 2)² + (z + 2)² = 3²
(x - 1)² + (y - 2)² + (z + 2)² = 9
(x - 1)² + (y - 2)² + (z + 2)² = 45
Therefore, the equation of the sphere that satisfies the given conditions is (x - 1)² + (y - 2)² + (z + 2)² = 45.
Learn more about equation of the sphere
brainly.com/question/30761440
#SPJ11
The size of an in vitro 3D tissue engineered heart patch is limited by oxygen transport. Above what fluid filtration velocity (in um/s) will convection dominate if the oxygen diffusion coefficient in tissue is 1.1 x 10 cm/s and the patch is 0.0275 cm.
The oxygen diffusion coefficient in tissue is given as 1.1 x 10 cm/s. The patch has a thickness of 0.0275 cm. The convection dominates if the fluid filtration velocity is above 40 cm/s
the size of an in vitro 3D tissue engineered heart patch is limited by oxygen transport. This means that oxygen needs to be able to reach all parts of the patch for proper functioning. Oxygen can be transported through diffusion or convection.
when convection dominates over diffusion, we need to compare the rates at which oxygen is transported through these mechanisms. Convection refers to the movement of fluid that carries oxygen, while diffusion refers to the movement of oxygen molecules from an area of higher concentration to an area of lower concentration.
The oxygen diffusion coefficient in tissue is given as 1.1 x 10 cm/s. The patch has a thickness of 0.0275 cm.
the filtration velocity above which convection dominates, we need to find the maximum rate of oxygen transport through diffusion. This can be done by multiplying the diffusion coefficient by the inverse of the thickness of the patch:
Maximum diffusion rate = diffusion coefficient / thickness
Maximum diffusion rate = (1.1 x 10 cm/s) / (0.0275 cm)
Maximum diffusion rate = 40 cm/s
If the fluid filtration velocity is greater than the maximum diffusion rate of 40 cm/s, then convection dominates.
Therefore, convection dominates if the fluid filtration velocity is above 40 cm/s.
Learn more about coefficient with the given link,
https://brainly.com/question/1038771
#SPJ11
A rectangular surface of 4 m2 was exposed to solar radiation of 1400 W/m2. The temperature of the surface was maintained at 500K. The spectral absorptivity of the surface is given as 0 for 0> λ (μm) < 0.5, 0.8 for 0.5> λ (μm)< 1, 0 for 1< λ (μm) < 2, and 0.9 for λ (μm)>2. Assuming the surface is diffuse and the sun temperature is 5800K, calculate the absorbed irradiation, radiosity, and net radiation heat transfer from the surface.
The absorbed irradiation is 4480 W, the radiosity is 2.5 x 10⁻⁴ W, and the net radiation heat transfer from the surface is -2.1 x 10⁻⁴ W.
We have,
A rectangular surface of 4 m² was exposed to solar radiation of 1400 W/m².
The temperature of the surface was maintained at 500K
For the absorbed irradiation, radiosity, and net radiation heat transfer from the surface, we'll need to consider the Stefan-Boltzmann law and the spectral absorptivity of the surface.
Absorbed irradiation (Q{absorbed}):
The absorbed irradiation is the amount of solar radiation absorbed by the surface. It can be calculated using the formula:
Q (absorbed) = Absorptivity Solar irradiation Surface area
Since the surface is rectangular with an area of 4 m² and the solar radiation is 1400 W/m², calculate the absorbed irradiation as follows:
Q (absorbed) = (0.8 × 1400 W/m²) 4 m²
= 4480 W
Radiosity (J):
Radiosity is the total radiative flux leaving the surface.
It can be calculated using the Stefan-Boltzmann law:
J = Emissive power
= Emittance × Surface area
The surface is diffuse, meaning it emits radiation according to its own temperature and emissivity.
To calculate the emissivity, we'll use the spectral absorptivity values provided:
Emissivity = (0.8 × 0.5) + (0 (1 - 0.5)) + (0.9 × (2 - 1))
= 2.2
J = Emissivity Stefan-Boltzmann constant (Surface temperature)⁴ × Surface area
J = 2.2 (5.67 x 10⁻⁸ W/m²K⁴) (500 K)⁴ * 4 m²
J = 2.5 × 10⁻⁴ W
Net radiation heat transfer (Q_net):
The net radiation heat transfer is the difference between the absorbed irradiation and the radiosity:
Q(net) = Q(absorbed) - J
Q (net ) = 4480 W - 2.5 x 10⁻⁴ W
= -2.1 x 10⁻⁴ W
Therefore, the absorbed irradiation is 4480 W, the radiosity is 2.5 x 10⁻⁴ W, and the net radiation heat transfer from the surface is -2.1 x 10⁻⁴ W. The negative sign indicates that the heat is transferred from the surface to the surroundings.
To learn more about heat visit:
https://brainly.com/question/934320
#SPJ4
Help what's the answer,
Answer:
x-intercept: (-9, 0)
y-intercept: (0, 6)
Step-by-step explanation:
x-intercept:
The x-intercept is the point at which a function intersects the x-axis.For any x-intercept, the y-coordinate will always be 0.We see that the line intersects the x-axis at the coordinate (-9, 0). Thus, (-9, 0) is the x-intercept.
y-intercept:
Similarly, the y-intercept is the point at which a function intersects the y-axis.For any y-intercept, the x-coordinate will always be 0.We see that the line intersects the y-axis at the coordinate (0, 6). Thus, (0, 6) is the y-intercept.
Find the parametric equation of the plane z passing through the points P=(1,0,0), Q- (0, 1,0) and S(0,0,1). Determine a point belonging to the plane and whose distance from P is equal to √2
The parametric equation of the plane passing through the points P=(1,0,0), Q=(0,1,0), and S=(0,0,1) is:
x = t
y = t
z = 1 - t
To find the parametric equation of a plane, we need to determine its normal vector. We can obtain the normal vector by taking the cross product of two vectors formed by the given points. Taking PQ and PS as two vectors, we have:
PQ = Q - P = (0-1, 1-0, 0-0) = (-1, 1, 0)
PS = S - P = (0-1, 0-0, 1-0) = (-1, 0, 1)
Taking the cross product of PQ and PS gives us the normal vector:
N = PQ x PS = (-1, 1, 0) x (-1, 0, 1) = (1, 1, 1)
Now that we have the normal vector, we can write the equation of the plane as:
Ax + By + Cz + D = 0
Substituting the values from the normal vector, we get:
x + y + z + D = 0
To find D, we can substitute the coordinates of one of the given points. Let's use P=(1,0,0):
1 + 0 + 0 + D = 0
D = -1
Therefore, the equation of the plane is:
x + y + z - 1 = 0
To express this equation in parametric form, we can choose one of the variables (say, t) as a parameter and express the other variables in terms of it. In this case, we choose t:
x = t
y = t
z = 1 - t
A point on the plane can be obtained by substituting a value of t in the parametric equations. To find a point whose distance from P is equal to √2, we can substitute t = √2 into the equations:
x = √2
y = √2
z = 1 - √2
Therefore, a point belonging to the plane and whose distance from P is √2 is (√2, √2, 1 - √2).
Learn more about parametric equation
brainly.com/question/30748687
#SPJ11
For a city with a population of 100,000 people, a new sanitary sewer treatment plant is being designed for an average flow of 130 gallon per capita per day (GPCD). Five circular primary clarifiers are planned, each with a 50-ft diameter. The clarifiers each receive 20% of the total flow. The residence time for the influent in each clarifier shall be 2.X hours. Compute the depth of each clarifier to the nearest foot. The depth of each clarifier is = (feet).
Sanitary sewer treatment plants are critical components of modern infrastructure, ensuring the safe disposal of waste. When designing such facilities, there are many factors to consider, including the size of the population and the expected average flow. Therefore, the depth of each clarifier is approximately 2 feet.
Given that a new sanitary sewer treatment plant is being designed for an average flow of 130 GPCD, let's compute the depth of each clarifier to the nearest foot.
The number of people served by the plant is 100,000, which we can use to determine the total flow of the plant. We can calculate this by multiplying the population by the average flow.100,000 * 130 GPCD = 13,000,000 gallons per day
Now that we know the total flow, we can determine the flow rate for each clarifier by multiplying the total flow by the percentage of the flow that each clarifier receives.
There are five clarifiers, and each receives 20% of the flow.5 * 20% = 100% total20% of 13,000,000 = 2,600,000 gallons per day
Thus, each clarifier will receive a flow rate of 2,600,000 gallons per day. We can now use this flow rate to calculate the depth of each clarifier using the following formula:V = Q * T
where V is the volume of the clarifier, Q is the flow rate, and T is the residence time.
We are given that the residence time is 2.X hours, which we can assume to be 2.5 hours. We can convert this to minutes by multiplying by 60.2.5 hours * 60 minutes/hour
= 150 minutesNow, we can calculate the volume of each clarifier.V
= Q * TV
= 2,600,000 * 150V = 390,000,000 cubic feet
We know that the clarifiers are circular and have a diameter of 50 feet.
The formula for the volume of a cylinder is:
V = πr²hwhere r is the radius and h is the height (or depth) of the cylinder. Since the clarifiers are circular, we can use the formula for the volume of a cylinder to find the volume of each clarifier.π * (50/2)² * h = 390,000,000Simplifying this equation, we get:h
= 1,248 feet³ / (π * 625)h ≈ 2 feet
Therefore, the depth of each clarifier is approximately 2 feet.
To know more about feet visit :
https://brainly.com/question/15658113
#SPJ11
An existing sanitary sewer has a diameter of 610 mm and is laid on a slope of 0.1%. The sewer pipe can be assumed to have a self-cleansing boundary shear stress of 1 Pa, and an equivalent sand roughness of 0.03 mm. (a) Find the self-cleansing flow rate assuming a vari- able Manning's n and without using design aids. (b) Find the self-cleansing flow if a fixed Manning's n of 0.013 is assumed. Would it be conservative to use n = 0.013 in assessing the self-cleansing state of a sewer?
The self-cleansing flow rate of a sanitary sewer can be calculated using the formula for calculating maximum velocity (Vmax) and Manning's velocity (V). For a fixed Manning's n of 0.013, the self-cleansing flow rate is 1.82 m/s. Using n = 0.013 would be conservative as a fixed value of Manning's coefficient is always less than the variable.
Given parameters of a sanitary sewer are:
Diameter of a pipe (D) = 610 mm
Slope (S) = 0.1%
Self-cleansing boundary shear stress (τ_b) = 1 Pa
Equivalent sand roughness (k_s) = 0.03 mm
(a) The self-cleansing flow rate assuming a variable Manning's n can be calculated as follows: The formula for calculating the maximum velocity (Vmax) of a pipe under the self-cleansing state is given by, Vmax = [g(k_s/3.7D) (Sf)1/2] where g = acceleration due to gravity = 9.81 m/s^2Now, the formula for Manning's velocity (V) is given by,
V = (1/n) (R_h)^2/3 (S^1/2) ...(1)
where
n = Manning's coefficient
Rh = hydraulic radius,
Rh = A/P,
where A = cross-sectional area and
P = wetted perimeter.
The cross-sectional area (A) of the pipe is given by,
A = πD²/4
Putting the value of D in the above equation,
A = π (610)²/4
= 292450.97 mm²
The wetted perimeter (P) of the pipe is given by,
P = πD
Putting the value of D in the above equation,
P = π (610) = 1913.03 mm
The hydraulic radius (Rh) of the pipe is given by,
Rh = A/P
Putting the values of A and P in the above equation,
Rh = 292450.97/1913.03 = 152.89 mm
Substituting the values of n, Rh, and S in equation (1), we get
V = (1/n) (Rh)^2/3 (S^1/2)
= (1/n) (0.15289)^2/3 (0.001)^1/2
Putting different values of Manning's coefficient (n), we get the following results:For
n = 0.01, V = 1.91 m/s
For n = 0.012, V = 2.01 m/s
For n = 0.015, V = 2.17 m/s
For n = 0.018, V = 2.3 m/s
Thus, the self-cleansing flow rate can be assumed to be the maximum velocity (Vmax), which is obtained for n = 0.018. Therefore, the self-cleansing flow rate is 2.3 m/s.
(b) The self-cleansing flow if a fixed Manning's n of 0.013 is assumed can be calculated as follows: Substituting the value of n in equation (1), we get
V = (1/0.013) (0.15289)^2/3 (0.001)^1/2V
= 1.82 m/s
Therefore, the self-cleansing flow rate is 1.82 m/s if a fixed Manning's n of 0.013 is assumed.Would it be conservative to use n = 0.013 in assessing the self-cleansing state of a sewer? Yes, it would be conservative to use n = 0.013 in assessing the self-cleansing state of a sewer. This is because a fixed value of Manning's coefficient (n) is always less than the variable Manning's coefficient.
Hence, the fixed value of Manning's coefficient will result in a lower flow rate than the variable Manning's coefficient. Therefore, the use of n = 0.013 would be conservative in assessing the self-cleansing state of a sewer.
To know more about self-cleansing flow rate Visit:
https://brainly.com/question/29103631
#SPJ11