What do the small lines marked on the Meterstick represent?

Answer: C(Elevation of surface features)

Explanation: It's a topographical Map which displays lines of Equal Elevation.

The two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances are mass and volume.

Chemical substances are any material made up of atoms and molecules that have distinct chemical properties. They include elements, compounds, and mixtures of elements and compounds. Chemical substances are the building blocks of all matter, from the atoms and molecules that make up the smallest particles to the complex structures of living organisms. Chemical substances can exist in various states, such as solid, liquid, and gas, and can react with other substances to form new compounds or break down into simpler substances. Chemical substances are important in many areas of science, including chemistry, biology, geology, and physics.

To learn more about chemical substances
https://brainly.com/question/29108029
#SPJ4

Answer:

it is oil.

Explanation:

it is oil because if water was written that would be wried so I think it is oil.

Answer:

0.184 mol

Explanation:

Look up molar masses for the elements that comprise H₃PO₄:

H = 1.008 g/mol

P = 30.97 g/mol

O = 15.99 g/mol

The molar mass of H₃PO₄ is a weighted sum of these (3 hydrogen + 1 phosphorus + 4 oxygen) that comes out to about 97.99 g/mol.

Then

(18 g H₃PO₄) × (1/97.99 mol/g) ≈ 0.1837 mol

Answer:

0.31M is the new concentration of the solution

Explanation:

The solution is diluted from 125mL to 1.0L = 1000mL. The dilution is of:

1000mL / 125mL = 8 times.

That means the concentration of the diluted solution is 8 times lower than the original solution. That is:

2.5M / 8 times =

The density of chlorine will be  3.163 g/L.

The mass of a substance per unit of volume is its density. According to Graham's law, a gas's rate of effusion is inversely proportional to its square root density. When a material's particles are concentrated in a low area, they tend to travel to the place where the concentration is highest. When we use perfume or a scented spray in one area of the room and subsequently can smell it throughout the entire space, that is a simple illustration of this process.

rate1 = H2 = 5.93

rate2 = Cl2 = 1

The molecular weight of H2 = 2.016

The molecular weight of Cl2 = x.

By Graham's Law:

5.93 / 1 = x / 2.016

35.1649 = x / 2.016

x = 70.89 g/mol

Determine gas density by volume

70.89 g / 22.414 L = 3.163 g/L

Learn more about Density

brainly.com/question/28929608

#SPJ4

Nitrous acid HNO_2 would be more suitable for use in a solution buffered at pH = 7.0.The other ion needed to make the buffer would be the conjugate base of the acid, which in this case would be the nitrite ion NO_2^-.

A, The Ka value is an indication of the strength of an acid; the lower the Ka value, the weaker the acid. Therefore, the hypochlorous acid HClO has a weaker acidity than nitrous acid HNO_2 and would be less suitable for use in a solution buffered at pH = 7.0.

B, Buffers work by maintaining a certain pH by providing a source of a weak acid and its conjugate base. Therefore, the other ion needed to make the buffer is the conjugate base of the acid, which in this case is the nitrite ion NO_2^-.

learn more about nitrous acid here

https://brainly.com/question/17055219

#SPJ4

Answer:

Explanation:

Stress causes the build up of strain, which causes the deformation of rocks and the Earth's crust. Compressional stresses cause a rock to shorten. Tensional stresses cause a rock to elongate, or pull apart.

The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, the concentration of sulfate ion is 1.15 M.

Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.

K₂SO₄[tex]\rightarrow[/tex]2K⁺ + SO₄²⁻

concentration of potassium sulfate=concentration of potassium ion=concentration of sulfate ion

1.15 M =concentration of potassium ion=concentration of sulfate ion

Therefore, the concentration of sulfate ion is 1.15 M.

Learn more about Molarity, here:

https://brainly.com/question/16727614

#SPJ1

The answer is 0.01918 kilometers.

To convert from feet to kilometers,

you must first convert feet to meters. To do this, multiply the number of feet by 0.3048. In this case, 62.95 feet multiplied by 0.3048 equals 19.18 meters To convert from meters to kilometers, multiply the number of meters by 0.001. 19.18 meters multiplied by 0.001 equals 0.01918 kilometers. Therefore, 62.95 feet is equal to 0.01912 kilometers.

To review the conversion steps more closely, starting with feet and ending with kilometers:

1. Feet (62.95) to meters (19.18): Multiply by 0.3048

2. Meters (19.18) to kilometers (0.01918): Multiply by 0.001 or divide by 1000.

Therefore, 62.95 feet is equal to 0.01918 kilometers.

To learn between Feet and Kilometers:

brainly.com/question/1462592

#SPJ4

Answer:

A

Explanation:

You can see the top part looks kinda like methane, and the bottom part looks like hexane.

Answer:

A is correctvia A P E x

Explanation:

The heat in joules is released when 25. 0 g of water (C = 4. 184 J/g°C) is cooled from 80. 0°C to 30. 0°C is -5210 J

To find the amount of heat released when a substance is cooled, we can use the equation:

q = mcΔT

where q is the amount of heat (in joules), m is the mass of the substance (in grams), c is the specific heat capacity of the substance (in joules per gram per degree Celsius), and ΔT is the change in temperature (in degrees Celsius).

Given the information in the question, we have:

m = 25.0 g

c = 4.184 J/g°C

ΔT = 30.0°C - 80.0°C = -50.0°C

So, we can substitute these values into the equation and get:

q = (25.0 g)(4.184 J/g°C)(-50.0°C)

q = -5210 J

Therefore, the amount of heat released when 25.0 g of water is cooled from 80.0°C to 30.0°C is -5210 J.

A negative sign means the heat is absorbed during the cooling process, it is an endothermic process.

Learn more about the calculation of heat transfer here: https://brainly.com/question/10670781

#SPJ4

Frida wants to find the volume of a stone by measuring the change in water volume before and after the stone is added.  the volume of the stone is 26 cm³.

Frida wants to find the volume of a stone by measuring the change in water volume before and after the stone is added. She fills a measuring cup with 473 mL of water and drops the stone in, causing the water level to rise to 499 mL. Using the conversion factor that 1 mL = 1 cm³, the initial volume of water is 473 cm³ and the final volume of water is 499 cm³. By applying the equation [Volume of stone] + [Initial water volume] = [Final water volume],

substituting the values

⇒ xcm3 +473cm3 = 499cm3

xcm3 =499cm3 −473cm3

xcm3 =26cm cube

the volume of the stone can be determined to be 26 cm³.

Learn more about  conversion factor here:

https://brainly.com/question/28366871

#SPJ4

Answer:

true :)

Explanation:

The process of turning pennies into brass simply has to do with dissolving the copper in the penny by a chemical process and this is then replaced with a brass alloy and this process could theoretically be applied to other coins.

A coin is a tiny, flat, round piece of metal or plastic which is used as legal tender or a medium of exchange. It should be noted that they are mass-produced at a mint so as to facilitate trade, and their weight is standardized.

In order achieve various mechanical, electrical, and chemical properties, it should be noted that copper and zinc can be combined in different ratios in order to create the alloy known as brass.

The composition of other coins, such as quarters, nickels, and dimes, is different from pennies and would require different chemical processes to alter. Additionally, it is illegal to deface or alter U.S. coin currency, so it would not be legal to do this process on any other coin. In this case, it can be applied to other coins.

Learn more about coin on:

https://brainly.com/question/24342899

#SPJ1

3 grams of Cu = 6.022 x 10^23 atoms of copper.

Answer:

2.84 × 10^22 atoms

Explanation:

To calculate the number of atoms in 3 grams of Cu, we can use avogadro's constant where:

[tex]1 \: mole = 6.02 \times 10 {}^{23} \: atoms[/tex]

Firstly, we have to calculate the number of moles in 3 grams of Cu. The formula to calculate moles is:

[tex]moles = \frac{mass}{molar \: mass} [/tex]

the mass = 3g and the molar mass = 63.55 (this value can be found in the periodic table)

Substitute the values in formula:

[tex]moles = \frac{3}{63.55} [/tex]

[tex]moles = 0.0472[/tex]

Now use the number of moles to convert to atoms using avogadro's number, where x is the unknown number of atoms we want to find:

[tex]1 \: mole : 6.02 \times 10 {}^{23} \: atoms[/tex]

[tex]0.0472 \: moles : x \: atoms[/tex]

Cross multiply and equate to solve for x:

[tex]1 \times x = 6.02 \times 10 {}^{23} \times 0.0472[/tex]

[tex]x = 6.02 \times 10 {}^{23} \times 0.0472[/tex]

[tex]x = 2.84 \times 10 {}^{22} \: rounded \: to \: 3sf[/tex]

Hence, there are 2.84 × 10^22 atoms in 3 grams of Cu

Answer: Low temperature high pressure

Explanation: i’m literally doing the same quiz right now

The smallest measurement you can make on the meter stick using the metric scale is the millimeter.

The millimeter is the smallest measurement on the meter stick . The millimeter is the smallest reading in the meter stick. we use the meter stick to simply measure the length. The meter reading is calibrated in the centimeters in the meter scale. the least count in the meter scale is the millimeters. we can measure the things as the length of the table or the width.

Thus, the smallest measurement in the meter stick using the meter scale is the millimeters. the symbol of the millimeters is mm.

To learn more about meter stick here

https://brainly.com/question/17687457

#SPJ4

Answer:

Explanation:

There are several things to consider before using hot and cold compresses:

The condition being treated: Different conditions may require the use of hot or cold compresses. For example, hot compresses may be used to alleviate muscle pain, while cold compresses may be used to reduce swelling and inflammation.

The individual's sensitivity to temperature: Some people may be more sensitive to temperature changes and may need to use a compress that is not as hot or cold.

The duration of use: It is generally recommended to use hot compresses for no more than 20 minutes at a time, and cold compresses for no more than 15 minutes.

The potential for burns or frostbite: Hot compresses should not be used on skin that is broken or damaged, as they can cause burns. Cold compresses should not be applied directly to the skin for an extended period of time, as they can cause frostbite.

The individual's overall health: Individuals with certain medical conditions, such as circulation problems, should be careful when using hot and cold compresses and should consult with a healthcare professional before doing so.

H2(g) + Cl2(g) = 2 HCl (g) AH-184.6 kJ where the mathematical notation for "is equivalent to" is. However, we also have a quantity called energy change in our thermochemical equation

Thermochemical equations are symmetric chemical equations that take into account both the energy change and the physiological state of all products and reactants. When energy is a reactant, a reaction is endothermic; whereas, when energy is a product, a reaction is exothermic.

A balance empirical formula with its heat per reaction is known as a thermochemical equation. They appear to be equal to A+B+C+H=Xjoules. You are already proficient at creating and balancing chemical equations. Therefore, all we must do is add either H or U values.

To know more about Thermochemical equation visit:

brainly.com/question/2874342

#SPJ1

alright, sum leaves have large air pockets inside that allow the plant to absorb oxygen from the water from rain or puddles

Answer:

Plant adaptations are modifications that enable a plant species thrive in its natural habitat. Underwater aquatic plants have enormous air pockets in their leaves that allow them to collect oxygen from the water. Aquatic plants' leaves are also incredibly delicate, allowing them to move with the waves.

V2 + 2NO → 2H2O + N2 The equation is balanced by adding an additional coefficient (2) to the hydrogen (H2) and water (H2O) molecules on the product side.

Balanced is a term used to describe a state of equilibrium or harmony. It implies a situation where all elements are in proportion and none are out of place or dominant. This could describe a healthy diet that provides a balance of proteins, carbohydrates, and fats, or a successful family life where time is shared between work, play, and private activities. Balance is also a key factor in physical and mental health, when all aspects of life are in alignment it allows for a more fulfilling and enjoyable experience.

This ensures that the number of atoms of each element is equal on both sides of the equation. In other words, the number of atoms of hydrogen (H2) and water (H2O) molecules on the left side of the equation must be equal to the number of atoms of hydrogen (H2) and water (H2O) molecules on the right side of the equation.

To learn more about balanced
https://brainly.com/question/18809694
#SPJ1

Answer:

152.12

Explanation:

hope it helps

Kong Mali po sorry

K can be found in solid form. Water exists as a liquid. KOH can be found in aqueous form. Hydrogen exists as a gas.

Reactants are chemical compounds that engage in chemical reactions, resulting in the formation of new chemicals known as products. Products are the new compounds created as a result of the chemical reaction between reactants.

Reactant- The substances which participate in a chemical reaction, are called reactants. A chemical reaction describes the process by which atoms, the fundamental building blocks of matter, rearrange themselves to form new combinations. Reactants are raw materials that react with one another.

Product- A product is a substance that is present at the end of a chemical reaction. In the equation above, the zinc and sulfur are the reactants that chemically combine to form the zinc sulfide product.

Here,

K=solid

H₂O=liquid

KOH=aqueous

H₂=gas

K exist in solid form. H₂O exist in liquid form. KOH exist in aqueous form. H₂ exist in gas form.

To know more about reactant,

https://brainly.com/question/14690610

#SPJ4

If the density of blood is 1.060 g/mL, then the mass of 6.56 pints of blood is 3.29 grams.

The density of a substance is the measure of how densely it is packed together. It is expressed as mass per unit volume. Symbol for density: D or Formula for Density: = m/V, where is the density, m is the object's mass, and V is the object's volume. Density is the amount of things (people, animals, plants, or items) in a given area. To compute density, divide the number of items by the area measured. A country's population density is the number of inhabitants divided by its area in square kilometers or miles.

Here,

6.56 pints  * 473.1765 ml/pint  * 1.060 g/ml = 3.290  gm

The mass of 6.56 pints of blood is 3.29 grams if the density of blood is 1.060 g/mL.

To know more about density,

https://brainly.com/question/29775886

#SPJ4

Immediately rinse chemicals off with a lot of water.                                  

Different assistance must be used because different chemical accidents might occur in various ways.

To provide the person access to fresh air, remove them from the factory or work location. Make sure your company has a plan in place for what to do if a worker becomes unconscious or is unable to move. If the person has inhaled chemicals, administer oxygen from an oxygen tank.

Immediately rinse chemicals off with lots of water for at least 15 minutes. The more quickly and for a longer period of time you start to pour water over the region, the more damage you will limit. Chemicals that catch fire or absorb quickly through the skin must be washed for a longer time, 30 minutes to 1 hour.

Right away, rinse the eye or both eyes. Rinse for at least 15 minutes while using a lot of water. If you have an emergency eye wash, activate it while keeping your eyes open with your fingers. If you must use your hands to splash water in your eyes, keep them open while doing so. Seek assistance in keeping them open.

Look for the chemical label or any other relevant information. Typically, the label will provide information on "ingestion" in the first aid section. If the person should vomit up the chemical or not is determined there. It is crucial that you heed that counsel. If the chemical is consumed, the label can include an antidote. Give the remedy if you have it.

Learn more about ingestion visit:

brainly.com/question/23164645

#SPJ4