Answer:
where are the options?
Explanation:
50 POINTS PLEASE HELP!!
What was the volume of air that has a volume of 6.00L at 120870 Pa, if the original pressure was 250020 Pa?
Answer:
120876
Explanation:
What is the density of a 30 g solid with a volume of 20 cm^3?
Answer:11.35 g/cm 3
Explanation:
Length
= 2.0 dm = 20 cm
Breadth
= 8.0 cm
Height
= 35 mm = 3.5 cm
Volume of block
V = ℓ ⋅ b ⋅ h = 20 cm × 8.0 cm × 3.5 cm = 560 cm
3
Density of lead is
Density
=
Mass
Volume
=
6356 g
560 cm
3
=
11.35 g/cm
3
Explanation:
Cl2 is a stable diatomic molecule. It can be decomposed to form two Cl atoms as
shown below.
Cl2 → 2Cl(9)
Predict the change in enthalpy (AH) of this reaction.
A) AH is (-); endothermic
B) AH is (+); endothermic
C) AH is (-); exothermic
D) AH is (+); exothermic
E) AH = 0; thermoneutral
Answer:
Option B: ΔH is (+); endothermic
Explanation:
From the reaction Cl2 → 2Cl(g) given, we can see that the number of moles on the left hand side is 1 while on right hand side, it is 2. This means the number of moles are increasing and it means that the randomness of the system has increased. Also, the bonds are being broken down.
Therefore, the reaction is endothermic. In endothermic reactions, ΔH is positive.
Thus, the correct option is option B.
Answer:
b
Explanation:
ah
3. Which of the following is the correct notation for an isotope with 3 protons and 5 neutrons?
A. 5/3Li
B. 3/5B
C. 8/3 Li
D. 8/5 B
Answer:
option c
Explanation:
neutros equal to mass num - atomic num
An atom can be defined by its properties:
Atomic number (Z): It is equal to the number of protons present in a neutral atom.Mass number (A): It is equal to the sum of the number of protons and the number of neutrons.An isotope is represented by the general notation of [tex]_Z^A\textrm{Y}[/tex], where X is the symbol of an element.
Mass number = Numer of protons + Number of neutrons
Put the value in the above formula.
[tex]\Rightarrow \text{Mass number}=3+5[/tex]
[tex]\Rightarrow \text{Mass number}=8[/tex]
The isotopic representation of the chemical specie is [tex]_3^8\textrm{Li}[/tex]. So, the correct option is C.
Learn more about isotopic representation: https://brainly.com/question/18210355
The two most common isotopes of argon (Ar) are argon-36 and argon-40. Given that the average atomic mass is 39.95, what can be said about the relative abundance of each isotope? Which is more common and how do you know? No calculation is necessary. I am looking for a simple written response.
Answer:
Argon-40
the reason this is abundent is because this is a more common isotope
Explanation:
Balance the equation Al 2 O 3 + Cl 2 + C ----> AlCl 3 + CO
Answer:
Al2O3 + 3Cl2 + 3 C → 2 AlCl3 + 3 CO
Explanation:
How many mL of 2M stock solution would I use to prepare 0.500 L of 0.1 M NaCl?
Answer:
25 mL
Explanation:
Step 1: Given data
Concentration of the concentrated solution (C₁): 2 MVolume of the concentrated solution (V₁): ?Concentration of the diluted solution (C₂): 0.1 MVolume of the diluted solution (V₂): 0.500 LStep 2: Calculate the volume of the concentrated NaCl solution
We will use the dilution rule.
C₁ × V₁ = C₂ × V₂
V₁ = C₂ × V₂ / C₁
V₁ = 0.1 M × 0.500 L / 2 M
V₁ = 0.025 L = 25 mL
Calculate the mass of aluminum that would have the same number of atoms as 6.35 g of cadmium
Answer:
1.62 g of Al contain the same number of atoms as 6.35 g of cadmium have.
Explanation:
Given data:
mass of cadmium = 6.35 g
Number of atoms of aluminum as 6.35 g cadmium contain = ?
Solution:
Number of moles of cadmium = 6.35 g/ 112.4 g/mol
Number of moles of cadmium = 0.06 mol
Number of atoms of cadmium:
1 mole = 6.022×10²³ atoms of cadmium
0.06 mol × 6.022×10²³ atoms of cadmium/ 1mol
0.36×10²³ atoms of cadmium
Number of atoms of Al:
Number of atoms of Al = 0.36×10²³ atoms
1 mole = 6.022×10²³ atoms
0.36×10²³ atoms × 1 mol /6.022×10²³ atoms
0.06 moles
Mass of aluminum:
Number of moles = mass/molar mass
0.06 mol = m/ 27 g/mol
m = 0.06 mol ×27 g/mol
m = 1.62 g
Thus, 1.62 g of Al contain the same number of atoms as 6.35 g of cadmium have.
How many moles of hydrogen atoms are there in 1.25 x 1025 molecules of ethane? (C2H6)
Answer:
124.56 moles of Hydrogen atoms.
Explanation:
We'll begin by calculating the number of moles of ethane that contains 1.25×10²⁵ molecules. This can be obtained as follow:
From Avogadro's hypothesis, 1 mole of any substance contains 6.02x10²³ molecules. This implies that 1 mole of ethane also contains 6.02x10²³ molecules.
Thus, 6.02x10²³ molecules are present in 1 mole of ethane.
Therefore, 1.25×10²⁵ molecules are present in = 1.25×10²⁵/6.02x10²³ = 20.76
Therefore, 20.76 moles of ethane contains 1.25×10²⁵ molecules.
Finally, we shall determine the number of mole of Hydrogen in 20.76 moles of ethane. This can be obtained as follow:
Ethane has formula as C2H6.
From the formula, 1 mole of ethane, C2H6 contains 6 moles of Hydrogen atoms.
Therefore, 20.76 moles of ethane will contain = 20.76 × 6 = 124.56 moles of Hydrogen atoms.
Therefore, 1.25×10²⁵ molecules of ethane contains 124.56 moles of Hydrogen atoms.
3.7500*10^4+9.7100*5
Answer:
37548.55
Explanation:
3.7500*10^4+9.7100*5
3.7500*10000+9.7100*5
37500+48.55
37548.55
For an investigation a student poured a blue solution of CuSO4 into a beaker. The student placed a shiny silver colored strip of zinc metal in the solution and observed the changes, The student inferred that a chemical reaction occurred. What evidence supports this inference?
Answer:
It is the second answer; A dark solid formed on the zinc.
Explanation:
This is the correct answer because when a solid is formed it is called a precipitate, which is commonly known as a chemical reaction.
The evidence that supports the student's inference is a dark solid formed on the zinc.
Chemical reaction of zinc metal with CuSO4When zinc is added to copper sulphate (CuSO4) solution, due to more reactivity of zinc, copper is replaced by zinc and forms zinc sulphate precipate.
Thus, the student is correct, there will be a chemical reatcion between the zinc and copper sulphate (CuSO4) solution, producing a dark solid substance.
Learn more about chemical reaction here: https://brainly.com/question/26018275
#SPJ2
What is the relationship between density and viscosity?
Answer:There is no relationship between the viscosity and density of a fluid. While viscosity is the thickness or thinness of a fluid, density refers to the space between its particles. However, both properties are affected by temperature. When a fluid is heated, its particles move far apart, and it also becomes less viscous.
A crest of a wave with an amplitude of 5 meters intersects the through of another wave with an amplitude of 2 meters. What is the resulting amplitude?:
A. 3 meters
B. 5 meters
C. 7 meters
D. 2 meters
A crest of a wave with an amplitude of 5 meters intersects the through of another wave with an amplitude of 2 metre . the resulting amplitude is
A. 3 meters
The resultant amplitude will be 7 meters.
We have crests of two different waves.
We have to find the resulting amplitude when both the waves intersect.
What is crest of a wave ?A crest point on a wave is the maximum value of upward displacement within a cycle.
According to the question -
Amplitude of wave 1 = 5 meters.
Amplitude of wave 2 = 2 meters.
Assuming that both waves are in phase, when the two waves which are
in-phase interfere, they interfere constructively. The final amplitude will be -
A(f) = A[1] + A[2] = 5 + 2 = 7 meters.
Hence, the resultant amplitude will be 7 meters.
To solve more questions on Superposition of waves, visit the link below-
https://brainly.com/question/28384885
#SPJ2
How many moles of methane (CH4) are there in 87.5g of methane (CH4)?
Of the atoms below, __________ is the most electronegative.
PLZ HELP I'LL AWARD BRINLIEST.
Hello sir, The answer that you are looking for is fluorine. Fluorine is the most electronegative atom. I am also sorry for calling you sir. I didn't know you were a woman.
Why don't solids, liquids, and gases leave Earth's atmosphere? A) Only gases can leave the atmosphere. B) Matter on Earth is destroyed and recycled. C) Gravity keeps all matter on Earth.
Answer:
The answer is C) Gravity keeps all matter on Earth.
Explanation:
I took the test and this was correct!
(Not a fake answer like some, I promise!)
Which of the following statements is true?
Erosion can be reduced by planting trees and other plants.
Warm air is more denser than cold air.
It forms areas of high pressure.
Most of the earth's freshwater is located deep below the crust.
The most abundance gas in the atmosphere is oxygen.
Answer:
erosion can be reduced by planting trees and other plants
Answer:
A
Explanation:
Consider the following balanced chemical equation representing the combustion of propane gas:
C3H8(g) + 5 O2(g) → 3 CO2(g) + 4 H2O(g)
The data from an experiment showed that 16.3 grams of carbon dioxide were produced. How many moles of water were expected as product? Report your answer with 3 SFs. Do NOT enter units on the final answer.
______________________ moles of H2O
Answer:
We are given the following equation:
C3H8(g) + 5 O2(g) → 3 CO2(g) + 4 H2O(g)
we can see that the number of moles of H2O is 4/3 time the moles of CO2
So, the easiest way to find the number of moles of H2O is to find the number of moles of CO2 and multiply it by 4 / 3
Moles of CO2:
Molar mass of CO2 = 44 grams / mol
Moles of CO2 = Given mass / Molar mass
Moles of CO2 = 16.3 / 44 moles
Moles of H2O:
Moles of H2O = Moles of CO2 * 4 / 3
Moles of H2O = 16.3 * 4 / 3 * 44
Moles of H2O = 16.3 / 3 * 11
Moles of H2O = 16.3 / 33
Moles of H2O = 0.5 moles (approx)
Therefore, along with 16.3 grams of CO2, 0.5 moles of H2O will also be formed
Find the volume of an object with a density of 12.8 g/mL and a mass
of 123 g
Answer:
The answer is 9.60 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question
mass = 123 g
density = 12.8 g/mL
We have
[tex]volume = \frac{123}{12.8} \\ = 9.609375...[/tex]
We have the final answer as
9.60 mLHope this helps you
can you guys match the words to the definitions for my science work on thermal energy please❤️?
Answer:
i dont feel like typin the whole definition so im jus gonna type the number with the word
1- temperature
2- laws of conservation of energy
3- boiling point
4- freezing point
5- joule
6- thermal energy
7- heat
8- solid
9- liquid
10- gas
Answer:
hey guys
Explanation:
hope this helps you to do something good
ipt A wall that was once white is painted black. Which of the following is definitely true of the painted wall? A. Its chemical properties have changed. B. Its physical properties have changed. C. Both its physical properties and chemical properties have changed. D. None of its characteristic properties have changed.
Answer:
B It's physical properties changed
Explanation:
Because they painted the outside
q=mcΔT. Given this equation find the change in temperature. q = 600 J, m= 25.0 g, c= 0.897 J/g°C. What is ΔT?
Answer:
Change in temperature = ΔT = 26.8°C
Explanation:
Given data:
Heat absorbed = 600 j
Mass = 25.0 g
Specific heat capacity = 0.897j /g°C
Change in temperature = ΔT= ?
Solution:
Formula:
q = mcΔT
600 j = 25.0 g ×0.897 j/g°C×ΔT
600 j = 22.425 j/°C×ΔT
ΔT = 600 j /22.425 j/°C
ΔT = 26.8°C
Which characteristic BEST identifies a pure substance?
a. shape
b. texture
c. melting point
d. state of matter
Whoever helps I will give BRAINLIEST
what does atom mean?
Answer:
Atoms consist of a nucleus made of protons and neutrons orbited by electrons. Atoms are the basic units of matter and the defining structure of elements. The term "atom" comes from the Greek word for indivisible, because it was once thought that atoms were the smallest things in the universe and could not be divided
Explanation:
What happens during a chemical reaction? Where do the reactants go, and where do the products come from?
What is the name of the molecular geometry (shape) for this Lewis structure?
Answer:
Trigonal Pyramidal
Explanation:
You have [tex]AX_3E_1[/tex] configuration which corresponds to a trigonal pyramidal structure.
A
is an organism that eats other organisms to gain energy; it is also called
Answer:
A consumer
Explanation:
Organisms, such as plants, that produce their own food by methods such as photosynthesis are called producers.
Organisms that need to consume other organisms as their food source, including all animals, are consumers. Some consumers consume plants (primary consumers, or herbivores) but other consumers eat other consumers (secondary consumers, or carnivores)
Which will have both the highest ionization energy and the largest atomic
radius? Potassium, Bromine, Krypton
Answer:
Bromine
Explanation:
Cuz it has bro in it :)
Which of the following shows the abbreviation for an Sl unit of density?
A. L/kg
B. g/mL
C.
g/cm
D. kg/m2
Explanation:
ur answer okkkkkkkkkkkkkkkkll
PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
Answer: I think G.
Explanation:
Answer:
I believe its student 2 as well. it's most definitely g