When animals consume food containing large polymeric molecules, such as proteins, carbohydrates, and nucleic acids, their digestive system breaks down these molecules into smaller components that can be absorbed and utilized by the body.
Mechanical digestion occurs in the mouth and stomach, where food is broken down into smaller pieces through chewing and mixing with digestive enzymes and acids. Chemical digestion occurs primarily in the small intestine, where enzymes and other compounds break down complex molecules into smaller components.
Proteins, for example, are broken down into their constituent amino acids by proteases, while carbohydrates are broken down into simple sugars like glucose and fructose by amylases. Nucleic acids are broken down into nucleotides by nucleases.
Once these molecules are broken down, they are absorbed into the bloodstream through the walls of the small intestine and transported to the liver, where they are further metabolized and distributed to other parts of the body as needed. The body then uses these molecules to build new proteins, carbohydrates, and nucleic acids or to generate energy through cellular respiration. Any excess molecules are typically stored for later use or eliminated from the body as waste.
To know more about molecules, here
brainly.com/question/4745152
#SPJ4
--The complete question is, What happens to large polymeric molecules in food once they are eaten by animals?--
the temperature of a constant volume of gas at 1.00 atm is 25 oc. in order to increase the pressure to 2.00 atm, what temperature is needed?
Answer: 323 degrees Celsius :)
Explanation:
calculate the ph for each case in the titration of 50.0 ml of 0.210 m hclo(aq) with 0.210 m koh(aq). use the ionization constant for hclo.
The initial pH of the titration is 2.50 and the final pH of the titration is: -1.67.
To calculate the pH for each case in the titration of 50.0 mL of 0.210 M HClO (aq) with 0.210 M KOH (aq), you must first use the ionization constant for HClO. The ionization constant for HClO is equal to 1.5 x 10-2. Now, you can calculate the pH of the titration.
At the beginning of the titration, the pH can be determined by the initial concentration of HClO (0.210 M). Since HClO is a weak acid, it partially dissociates in water, releasing hydrogen ions. The [H+] is equal to the HClO initial concentration multiplied by the ionization constant: [tex][H+] = 0.210 x 1.5 x 10-2 = 3.15 x 10-3[/tex]
The pH can be determined by the negative logarithm of the [tex][H+], or pH = -log[H+][/tex]. So, the initial pH of the titration is [tex]-log (3.15 x 10-3) = 2.50.[/tex]
As the titration proceeds, the pH will increase due to the addition of KOH, a strong base. The final pH of the titration can be calculated in the same manner. At the equivalence point, the [H+] is equal to the KOH initial concentration multiplied by the ionization constant:[tex][H+] = 0.210 x 1 = 0.210.[/tex]
The pH of the equivalence point is [tex]-log (0.210) = -1.67.[/tex] To summarize, the initial pH of the titration is 2.50 and the final pH of the titration is -1.67.
To know more about titration refer here:
https://brainly.com/question/2728613#
#SPJ11
chemoorganotroph and a photoautotroph would not be competing with each other for (choose all that apply) a. carbon b. light c. nitrogen d. oxygen
The chemoorganotroph and a photoautotroph would not be competing with each other for carbon and light.
The chemoorganotroph is a microorganism which derives its energy from organic compounds. It uses organic carbon as its electron donor and chemical energy source. Chemoorganotrophs can be found in a variety of environments, including soil, water, and the human body.
The photoautotroph is a microorganism that is capable of generating its organic food using sunlight and carbon dioxide. It converts carbon dioxide and water into organic compounds that it uses to create energy through photosynthesis.
Competition is an interaction between two or more organisms or populations that use the same limited resources, resulting in a decrease in the availability of these resources. In this context, chemoorganotrophs and photoautotrophs do not compete for carbon and light.
Therefore, the correct options are (a) carbon and (b) light.
Learn more about chemoorganotroph: https://brainly.com/question/29872582
#SPJ11
a good extraction solvent will have all the listed qualities except one. which quality listed is incorrect?
A good extraction solvent will have the following qualities: Low boiling point, High boiling point, High density, Low density, Solubility in water, Solubility in organic solvents, etc.The incorrect quality listed is high boiling; a good extraction solvent should instead have low selectivity.
Extraction is a technique used to separate a desired substance from a mixture. The method involves dissolving one or more compounds present in a sample into a solvent. Extraction can be used to separate a mixture into its individual components, extract a compound from a sample, or remove impurities from a product.The listed qualities of a good extraction solvent are as follows:
Low boiling point
High boiling point
High density
Low density
Solubility in water
Solubility in organic solvents
Ability to separate from the mixture
A good extraction solvent will have all the qualities listed above except one, which is "high boiling point." A good extraction solvent should have a low boiling point to allow easy separation from the mixture. It should also have high solubility in both water and organic solvents, enabling it to dissolve a wide range of compounds.A good extraction solvent should have high density, enabling it to form a clear layer when mixed with the sample. It should also have low density to enable the separation of the solvent and the extracted compound. Finally, a good extraction solvent should have the ability to separate from the mixture after extraction, which means it should not form an azeotrope with the compound to be extracted.
For more such questions on extraction solvent , Visit:
https://brainly.com/question/25418695
#SPJ11
The complete questions is :
A good extraction solvent will have all the listed qualities except one. which quality listed is incorrect?
Low boiling pointHigh boiling pointHigh densityLow densitySolubility in waterSolubility in organic solventsAbility to separate from the mixturehow would u make a 1.0L of a 0.1 M solution of AgNO3?
Answer:
You need to dissolve 16.988 g of AgNO3 in enough water to make a final volume of 1.0 L to make a 0.1 M solution of AgNO3.
Explanation:
To make a 1.0 L of a 0.1 M solution of AgNO3, you need to know the molar mass of AgNO3, which is:
Ag = 107.87 g/mol
N = 14.01 g/mol
O = 16.00 g/mol (there are three O atoms, so 3 x 16 = 48.00 g/mol)
Total = 169.88 g/mol
Next, you need to calculate the mass of AgNO3 required to make a 0.1 M solution in 1.0 L of water:
0.1 moles/L * 1.0 L = 0.1 moles
Mass = moles x molar mass
Mass = 0.1 moles x 169.88 g/mol
Mass = 16.988 g
Therefore, you need to dissolve 16.988 g of AgNO3 in enough water to make a final volume of 1.0 L to make a 0.1 M solution of AgNO3.
which isotope contributed the greater activity to the radiation cloud? assume that there are no atoms emitted in the accident.
The isotope that contributed the greater activity to the radiation cloud is I-131.
The isotopes that contributed to the radioactivity of the cloud were mostly short-lived isotopes, and hence the isotopes with longer half-lives like Cesium-137 did not contribute much to the activity. Iodine-131 is one such short-lived isotope that had a half-life of 8.1 days.Iodine-131 has an atomic number of 53, and hence it is a radioactive isotope of iodine. The isotope was emitted into the environment as a result of the Chornobyl disaster.
The isotope was a cause of worry as it is readily absorbed by the body and can accumulate in the thyroid gland causing cancer in the long run. The other isotopes that contributed to the radioactivity of the cloud include strontium-90, cesium-134, and cesium-137.
Read more about the isotope:
https://brainly.com/question/14220416
#SPJ11
what is the ph of a 0.785 m solution of formic acid, hcho2? the ka of hcho2 is 1.77 x 10-4
Answer:
nerd
Explanation:
nerd
Answer: The pH of a 0.785 M solution of formic acid (HCHO2) is 3.85.
The pH of a 0.785 M solution of formic acid (HCHO2) can be calculated using the Ka value of 1.77 x 10-4. First, we calculate the concentration of the hydrogen ion, [H+], in the solution:
[H+] = Ka x [HCHO2] = 1.77 x 10-4 x 0.785 = 1.39 x 10-4 mol/L
The pH of the solution is equal to the negative logarithm of the hydrogen ion concentration:
pH = -log[H+] = -log(1.39 x 10-4) = 3.85
Therefore, the pH of a 0.785 M solution of formic acid (HCHO2) is 3.85.
Learn more about ph level here:
https://brainly.com/question/1458045#
#SPJ11
nitrogen and hydrogen gases are combined at high temperatures and pressures to produce ammonia, nh3. if 100. g of n2 is reacted with excess h2, what number of moles of nh3 will be formed? hint: be sure to write out the balanced equation!
7.14 moles of NH₃ are formed in this reaction. This is about the reaction for the generation of ammonia. 2 moles of ammonia are created when 1 mol of nitrogen gas combines with 3 moles of hydrogen.
N₂ + 3H₂ → 2NH₃
In the query, we were instructed that the surplus is the H₂ hence the N₂ is limiting reagent. We identify the moles that have responded as follows:
N2 mass is 101.7 grams.
N2 has a molar mass of 28.0 g/mol.
H2 is excess.
Molar mass of H2 = 2.02 g/mol
NH3 has a molar mass of 17.03 g/mol.
100 g / 28 g/mol = 3.57 moles
Therefore, If 1 mol of nitrogen gas may make 2 moles of ammonia.
3.57 moles of N₂ must produce (2 * 3.57) / 1 = 7.14 moles of NH₃
Learn more about moles here:
https://brainly.com/question/15521314
#SPJ4
what is the concentration (in m) of a sample of the unknown dye with an absorbance of 0.29 at 542 nm?
Answer: The concentration (in m) of a sample of the unknown dye with an absorbance of 0.29 at 542 nm is 1.29 x 10^-5M.
What is the Beer-Lambert law?
The Beer-Lambert law relates the intensity of light absorption to the concentration of the absorbing material present in a sample. According to the Beer-Lambert law, the absorbance of light is directly proportional to the concentration of the absorbing material in the sample and the path length of the light through the sample.
What is the formula to calculate concentration?
The formula to calculate concentration is given as;
C = A/εl
Where,C is the concentration of the sample, A is the absorbance of the sample, ε is the molar absorptivity coefficient of the absorbing material, l is the path length of the light through the sample.
Now, putting the given values in the above formula, we get, C = A/εl
Here,
A = 0.29ε = molar absorptivity coefficient of the absorbing materiall = path length of the light through the sample= 1 cm
So, putting the values in the formula we get,
C = 0.29/(8.6 x 10^3 M^-1cm^-1 × 1 cm)C
= 3.37 x 10^-5 M or 1.29 x 10^-5M (approx)
Hence, the concentration (in m) of a sample of the unknown dye with an absorbance of 0.29 at 542 nm is 1.29 x 10^-5M.
Learn more about concentration here:
https://brainly.com/question/10725862#
#SPJ11
tell me all about hydrothermal deposits: what are they, when do they typically form in the solidification process, what are the two basic types, where do they typically form, and why are they of special importance?
Answer:
What are they? When do they typically form in the solidification process?
Hydrothermal deposits are hot springs of mineral-rich water that form during the late stages of solidification.
Where do they typically form?
They typically form in volcanoes, mid-ocean ridges, and hot springs.
Why are they of special importance?
They are important sources of ore minerals and precious metals, and provide evidence of past volcanic and tectonic activity. They also give us insight into the chemical and physical processes deep within the Earth.
Hydrothermal deposits are hot springs of mineral-rich water that form when hot magma or lava interacts with groundwater or surface water. They typically form during the late stages of the solidification process, when magma has cooled and begun to crystallize.
There are two basic types of hydrothermal deposits: veins and hot spring deposits. Veins form when mineral-rich fluids are forced into cracks in pre-existing rock layers, while hot spring deposits form when the hot mineral-rich water is discharged from the surface. Hydrothermal deposits can form in a variety of locations, including volcanoes, mid-ocean ridges, and hot springs.
Hydrothermal deposits are of special importance for two main reasons. First, they are often a major source of ore minerals and precious metals, such as gold and silver. Second, they provide important evidence of past volcanic and tectonic activity, which can help us understand the geologic history of an area. Additionally, hydrothermal deposits can provide valuable insight into the chemical and physical processes that occur deep within the Earth.
In summary, hydrothermal deposits are hot springs of mineral-rich water that form during the late stages of solidification. They typically form in volcanoes, mid-ocean ridges, and hot springs. They are important sources of ore minerals and precious metals, and provide evidence of past volcanic and tectonic activity. They also give us insight into the chemical and physical processes deep within the Earth.
Learn more about Hydrothermal deposits here:
https://brainly.com/question/30710400#
#SPJ11
devise a 6-step synthesis of a carboxylic acid from ethyne using the reagents provided. ethyne is a carbon carbon triple bond, bonded to two hydrogens. three reagents convert this to the main intermediate, an alkene with three bonds to hydrogen and one bond to a propyl group. three more reagents convert this to the product, which is a carboxylic acid bonded to a four carbon chain. reagent 1 is: reagent 2 is: reagent 3 is: reagent 4 is: reagent 5 is: reagent 6 is:
To synthesize a carboxylic acid from ethyne using the reagents provided, follow these steps: Hydroboration-oxidation, Tautomerization, Nucleophilic addition, Oxidation and Oxidative cleavage.
Hydroboration-oxidation- Reagent 1: Diborane (B2H6); Reagent 2: Hydrogen peroxide (H2O2) and sodium hydroxide (NaOH) Ethyne (C2H2) will undergo hydroboration-oxidation using diborane (B2H6) followed by treatment with hydrogen peroxide (H2O2) and sodium hydroxide (NaOH) to form an alkene (vinyl alcohol) with three bonds to hydrogen and one bond to a hydroxyl group.
Tautomerization- The vinyl alcohol formed in step 1 will undergo tautomerization (keto-enol equilibrium) to form an aldehyde with two carbons. Nucleophilic addition- Reagent 3: n-Propyl Grignard reagent (n-PrMgBr) Add the n-Propyl Grignard reagent (n-PrMgBr) to the aldehyde. This will result in a nucleophilic addition reaction, leading to the formation of a tertiary alcohol with a four-carbon chain.
Oxidation- Reagent 4: Chromic acid (H2CrO4), Oxidize the tertiary alcohol to a ketone using chromic acid (H2CrO4). This will form a ketone with a four-carbon chain. Oxidative cleavage- Reagent 5: Ozone (O3), Reagent 6: Zinc (Zn) and water (H2O), Perform an oxidative cleavage of the ketone using ozone (O3) followed by a reductive workup with zinc (Zn) and water (H2O). This will result in the formation of a carboxylic acid bonded to a four-carbon chain.
To know more about carboxylic acid, refer here:
https://brainly.com/question/29035899#
#SPJ11
To neutralize the acid in 10.0 mL of 18.0 M H2SO4 that was accidentally spilled on a laboratory bench top, solid sodium bicarbonate was used. The container of sodium
bicarbonate was known to weigh 155.0 g before this use and out of curiosity its mass was measured as 144.5 g afterwards. The reaction that neutralizes sulfuric acid this way is as follows: H2SO4 + 2 NaHCO3 --> Na2SO4 + 2 CO2 + 2 H2O
Was sufficient sodium bicarbonate used? Calculate the limiting reactant and the maximum yield in grams of sodium sulphate.
8.88 g is the greatest yield of Na2SO4 that may be produced. As a result of using less NaHCO3 than is required to fully react with the H2SO4, the actual number of NaHCO3 used.
Why is bicarbonate important to the body?The body requires the base chemical bicarbonate to maintain a healthy acid-base balance. Your body's natural pH balance keeps it from becoming overly acidic, which can lead to a variety of health issues. By eliminating extra acid, the kidneys and lungs maintain a normal blood pH.
What occurs when the bicarbonate level is low?Metabolic acidosis is indicated by low blood bicarbonate levels. It is an alkali, the antithesis of acid, and it can counteract acid. Our blood's acidity is kept under control by it.
To know more about Bicarbonate visit:
https://brainly.com/question/8560563
#SPJ1
what gas law states that volume and pressure are inversely proportional, while directly proportional to temperature when moles are held constant? a) boyle's law b) charles's law c) gay-lussac's law d) avogadro's law e) combined gas law
The correct answer is option e) combined gas law.
Boyle's Law states that the pressure of a given mass of an ideal gas held at a constant temperature varies inversely with the volume it occupies. This relationship can be expressed mathematically as PV = k, where k is a constant.
Charles's Law states that at constant pressure, the volume of a given mass of an ideal gas is directly proportional to its temperature. This relationship can be expressed mathematically as V/T = k, where k is a constant.
Gay-Lussac's Law states that at constant volume, the pressure of a given mass of an ideal gas is directly proportional to its temperature. This relationship can be expressed mathematically as P/T = k, where k is a constant.
Avogadro's Law states that the volume of a given mass of an ideal gas is directly proportional to the number of moles of the gas present. This relationship can be expressed mathematically as V/n = k, where k is a constant.
Finally, the Combined Gas Law states that the volume, pressure, and temperature of a given mass of an ideal gas are all related. This relationship can be expressed mathematically as PV/T = k, where k is a constant.
According to the law, volume, and pressure are inversely proportional, while directly proportional to temperature.
Therefore, the law which states that the volume and pressure are inversely proportional, while directly proportional to temperature when moles are held constant is the Combined gas law.
To know more about Combined gas law, refer here:
https://brainly.com/question/13154969#
#SPJ11
Please answer both
The heat of vaporization for water is 2260 J/g. How much heat in J would be needed to evaporate 8.66g of water?
An unknown salt was dissolved to make a total 1.25g of solution. The temperature of the water decreased from 25.1C to 20.4C when 8mol were dissolved. What is the heat of solution in J/mol?
(a) We would need 19595.6 J of heat to evaporate 8.66 g of water.
(b) The heat of solution is -3.1 J/mol.
What is the heat needed to evaporate the water?To evaporate 8.66 g of water, we need to use the heat of vaporization for water, which is 2260 J/g.
Therefore, the total amount of heat required to evaporate 8.66 g of water is:
2260 J/g x 8.66 g = 19595.6 J
Therefore,
To find the heat of solution in J/mol, we need to use the formula:
ΔH_solution = -q_solution / n
where;
ΔH_solution is the heat of solution, q_solution is the heat released or absorbed during the solution process, n is the number of moles of solute dissolved.First, we need to calculate the heat released or absorbed during the solution process, which can be found using the formula:
q_solution = m_solution x C_solution x ΔT
We know that 8 mol of the unknown salt were dissolved in 1.25 g of solution, so the mass of the solute is:
m_solute = n x M
We also know that the temperature of the solution decreased from 25.1 ⁰C to 20.4 ⁰C, so ΔT = 4.7 K.
The specific heat capacity of water is 4.184 J/g·K, so we can assume that the specific heat capacity of the solution is also 4.184 J/g·K.
Therefore, the heat released or absorbed during the solution process is:
q_solution = 1.25 g x 4.184 J/g·K x 4.7 K = 24.8 J
Now we can use this value to calculate the heat of solution:
ΔH_solution = -q_solution / n
= -24.8 J / 8 mol
= -3.1 J/mol
Therefore, Note that the negative sign indicates that the solution process is exothermic, i.e., heat is released during the process.
Learn more about heat of solution here: https://brainly.com/question/29055794
#SPJ1
a crystal is a single, continuous piece of a mineral bounded by flat surfaces that formed naturally as the mineral grew and it needs to be see-through. group of answer choices true false
The given statement "a crystal is a single, continuous piece of a mineral bounded by flat surfaces that formed naturally as the mineral grew and it needs to be see-through" is True because a crystal is a mineral that is bounded by flat surfaces that is formed naturally as the mineral keeps growing.
Crystals are typically transparent or translucent and have a distinctive geometric shape. The size of a crystal can range from microscopic to a few centimeters.
The process of crystal growth can occur in one of two ways.
The first is through nucleation, which is when a particle, called a nucleus, begins to grow around the surface of the mineral. As it continues to grow, the nucleus will attract surrounding atoms and molecules, which then attach to the surface of the nucleus and form the crystal structure.
The second method is called epitaxy, and it occurs when a crystal already present in the environment will attract and attach surrounding atoms and molecules, thereby forming a new crystal structure.
Crystals can form in a wide range of shapes, sizes, and colors depending on the environment and the mineral from which they are formed. Additionally, different crystal shapes can often form from the same mineral depending on the environmental conditions.
In conclusion, it can be said that yes, a crystal is a single, continuous piece of a mineral that is bounded by flat surfaces that formed naturally as the mineral grew and it needs to be see-through.
To know more about Crystals, refer here:
https://brainly.com/question/13008800#
#SPJ11
according to the vsepr model, the electron-pair arrangement of the central atom in bh3 is predicted to be .
According to the VSEPR model, the electron-pair arrangement of the central atom in BH₃ is predicted to be trigonal planar.
What is VSEPR Theory?VSEPR stands for Valence Shell Electron Pair Repulsion. It is a model used in chemistry to predict the shape of individual molecules based on the extent of electron-pair electrostatic repulsion. It is founded on the Lewis structure theory of bonding, which describes electron pairs as lone pairs and bonds. Furthermore, VSEPR is based on the idea that electrons repel one another because they are negatively charged.
How does VSEPR Theory predict the electron-pair arrangement of BH₃?The electron-pair arrangement of the central atom in BH₃ is predicted to be trigonal planar by the VSEPR model.
BH₃ is a boron atom bonded to three hydrogen atoms. Boron has three valence electrons, but it requires six valence electrons to satisfy the octet rule. This means that boron has a vacant p orbital that it can use to form a molecule. The three hydrogen atoms are covalently bonded to the boron atom, with each hydrogen atom sharing one electron pair with the boron atom.
Based on this electron-pair arrangement, the VSEPR model predicts that the molecule will have a trigonal planar geometry. This means that the three hydrogen atoms will be positioned around the boron atom at the corners of an equilateral triangle. This arrangement causes the electron pairs in the valence shell to be as far apart as possible, resulting in a repulsion-free arrangement that is energetically stable.
Thus, the structure of BH₃ will be a trigonal planar.
To know more about the VSEPR Theory, refer here:
https://brainly.com/question/14574141#
#SPJ11
the student then prepares a solution using four pellets of naoh dissolved to 100.00 ml in a volumetric flask. the student slowly adds this to the khp solution to perform a titration. it requires 22.50 ml of the naoh solution to reach the endpoint. what is the molarity of the naoh solution based on this titration?
The volume of NaOH solution used in the titration is 22.50 mL or 0.0225 L. The molarity of the NaOH solution is 0.210 mol/L.
To determine the molarity of the NaOH solution, we can use the balanced chemical equation for the reaction between NaOH and KHP:
NaOH + KHP → NaKP + H2O
From the equation, we can see that one mole of NaOH reacts with one mole of KHP. Therefore, the number of moles of NaOH used in the titration can be calculated by:
moles NaOH = molarity of NaOH solution × volume of NaOH solution used (in liters)
The volume of NaOH solution used in the titration is 22.50 mL or 0.0225 L.
To calculate the molarity of the NaOH solution, we need to determine the number of moles of NaOH used in the titration. From the balanced equation, we can see that one mole of KHP reacts with one mole of NaOH. The mass of KHP used in the titration is 0.969 g, which corresponds to the number of moles of KHP used:
moles KHP = mass of KHP / molar mass of KHP
= 0.969 g / 204.22 g/mol
= 0.004738 mol
Since the stoichiometry of the reaction is 1:1, the number of moles of NaOH used in the titration is also 0.004738 mol. Substituting these values into the above equation, we get:
0.004738 mol = molarity of NaOH solution × 0.0225 L
Solving for the molarity of the NaOH solution, we get:
molarity of NaOH solution = 0.004738 mol / 0.0225 L
= 0.210 mol/L
To learn more about molarity
https://brainly.com/question/8732513
#SPJ4
which molecule would you expect to be more soluble in ethanol ch3ch2oh), ccl4 or ch2cl2? explain your choice.
Answer: Among CCl4, CH2Cl2 and ethanol, CH2Cl2 is the molecule that is more soluble in ethanol (CH3CH2OH).
Explanation:
Solubility can be defined as the amount of substance that can dissolve in a solvent. The amount of substance that can be dissolved in a solvent depends on various factors such as the polarity of the molecule and the intermolecular forces acting between the solvent and the solute.
Solvents that have the same polarity will dissolve each other. The polar and nonpolar nature of the molecule will help in deciding its solubility in a solvent.
Ethanol is a polar molecule with a hydroxyl group that can form hydrogen bonds with other molecules. Ethanol can dissolve polar or ionic molecules very well and hence, it is used as a solvent for many applications.
On the other hand, CCl4 is a nonpolar molecule and doesn't dissolve in polar solvents like water. In CCl4, the four chlorine atoms are equally distributed around the carbon atom, giving it a tetrahedral shape. The bond dipoles cancel each other out and hence, the molecule doesn't have a net dipole moment.
CH2Cl2 is a polar molecule with a dipole moment due to the difference in electronegativity between the carbon, hydrogen and chlorine atoms. The C-Cl bond is polar and creates a dipole moment that can interact with the polar solvent, ethanol. Hence, CH2Cl2 is more soluble in ethanol than CCl4.
Learn more about solubility here:
https://brainly.com/question/29661360#
#SPJ11
In a mixture of oxygen and nitrogen gas, 90% of the total gas pressure is exerted by the nitrogen. If the total pressure is 5.0 atm, what pressure does the oxygen exert? (Number only, 1 decimal place)
As a result, oxygen exerts a pressure of 0.5 atm.
What is the oxygen content in the air and the pressure in atm?1013.25 mbar is the atmospheric pressure at sea level (under normal atmospheric circumstances). Here, nitrogen (78.08% vol), oxygen (20.95% vol), argon (0.93% vol), and carbon dioxide (0.040% vol) make up the majority of the dry air.
If nitrogen is responsible for 90% of the total pressure, oxygen is responsible for the remaining 10%.
First, let's calculate the pressure that nitrogen exerts:
Pressure of nitrogen = 90% of total pressure
= 0.9 * 5.0 atm
= 4.5 atm
Now, we can find the pressure exerted by oxygen:
Pressure of oxygen = 10% of total pressure
= 0.1 * 5.0 atm
= 0.5 atm.
To know more about pressure visit:-
https://brainly.com/question/18431008
#SPJ1
liquid hydrogen is used as one part of the booster fuel in the space shuttle. what type of forces exist between hydrogen molecules in liquid hydrogen?
Liquid hydrogen is held together by dispersion forces, which are weak attractions between molecules caused by the uneven distribution of electrons.
The dispersion force is a type of force that exists between molecules. This force is very weak and temporary, but it can be sufficient to bind the atoms of some molecules together in a molecule. Dispersion forces are sometimes known as London forces, van der Waals forces, or instantaneous dipole-induced dipole forces.
The dispersion force is caused by the motion of electrons within the molecule. Electrons are always in motion, and sometimes the electrons in a molecule will happen to accumulate more on one side of the molecule than on the other. When this happens, a temporary electric dipole moment is created, which can attract or repel other molecules nearby. The dispersion force is an attractive force because the temporary electric dipole moment can attract other molecules.
Learn more about dispersion force at https://brainly.com/question/1432999
#SPJ11
PLEASEEEEEEEEE HELP MEEEE AND EXPLAINNNNN
does the hydrogen necessary in the electron transport chain come from the splitting of carbon dioxide molecules
The hydrogen necessary for this process is ultimately derived from the splitting of carbon dioxide molecules. Yes, the hydrogen necessary for the electron transport chain is derived from the splitting of carbon dioxide molecules in a process known as the Calvin Cycle, or the light-dependent reaction.
In this process, carbon dioxide, water, and light energy are used to create high-energy molecules, such as ATP and NADPH, which are then used in the electron transport chain. During the Calvin cycle, carbon dioxide is reduced by NADPH and ATP to produce a three-carbon molecule called glycerate 3-phosphate.
Hydrogen is removed from glycerate 3-phosphate to create a two-carbon compound known as glyceraldehyde 3-phosphate. This compound is then used to create other compounds, such as glucose, which can be used for energy.
Know more about electron transport chain here:
https://brainly.com/question/24372542
#SPJ11
onsider a process in which an ideal gas is compressed to one-fourth of its original volume at a constant temperature. calculate the entropy change per mole of gas.
The entropy change per mole of gas is -1.387R.
The entropy change per mole of gas in a process in which an ideal gas is compressed to one-fourth of its original volume at a constant temperature can be calculated as follows:
Let us denote the original volume as V₁, the final volume as V₂, and the number of moles of the gas as n. The entropy change can be calculated using the formula:
ΔS = nR ln (V₂/V₁)
Therefore, the entropy change per mole of gas is given by:
ΔSper mole = R ln (V₂/V₁)
In this case, V₁ = 4V₂ and so,
ΔSper mole = R ln (1/4) = - R ln 4 = -2.303 R log 4 = -1.387R
Thus, the entropy change per mole of gas when an ideal gas is compressed to one-fourth of its original volume at a constant temperature is -1.387R.
To know more about entropy change, refer here:
https://brainly.com/question/4526346#
#SPJ11
what happens to the rate if the concentration of chlorocyclopentane is tripled and the concentration of sodium hydroxide reamins the same
The rate of the reaction between chlorocyclopentane and sodium hydroxide will increase when the concentration of chlorocyclopentane is tripled and the concentration of sodium hydroxide remains the same.
This is due to the fact that increasing the concentration of a reactant increases the frequency of collisions between particles of the reactants, resulting in a higher reaction rate.
When a reactant's concentration is increased, the number of molecules or atoms per unit volume also increases. As a result, the frequency of collisions between the reactant particles increases.
The greater the frequency of collisions between the reactant particles, the greater the chance of a successful reaction, thus increasing the reaction rate.
When the concentration of one of the reactants is increased and the concentration of the other reactant remains the same, the reaction rate increases.
To know more about chlorocyclopentane click on below link:
https://brainly.com/question/14751180#
#SPJ11
if the equillibrium is established by beginning with equal number of moles of So2 and O2 what must be true at equillibrium
Explanation:
the reaction being referred to is the one where sulfur dioxide (SO2) and oxygen (O2) react to form sulfur trioxide (SO3) according to the following balanced equation:
2 SO2(g) + O2(g) ⇌ 2 SO3(g)
If the equilibrium is established by beginning with equal numbers of moles of SO2 and O2, i.e., if the initial molar amounts of SO2 and O2 are the same, then we can conclude the following at equilibrium:
The rate of the forward reaction (2 SO2(g) + O2(g) → 2 SO3(g)) is equal to the rate of the reverse reaction (2 SO3(g) → 2 SO2(g) + O2(g)).
The concentrations of SO2, O2, and SO3 will remain constant over time.
The amounts of SO2, O2, and SO3 present at equilibrium will depend on the temperature, pressure, and other conditions of the system.
The value of the equilibrium constant (Kc) for the reaction will have a specific numerical value at equilibrium, which will depend on the temperature and other conditions of the system.
The value of the reaction quotient (Qc) for the reaction will be equal to the equilibrium constant (Kc) at equilibrium, indicating that the system is at equilibrium
leave a comment
Study the chemical equations in the table.
2ZnS(s)+3O2(g)⟶2ZnO(s)+2SO2(g)
Cu2+(aq)+H2S(g)⟶CuS(s)+2H+(aq)
4H+(aq)+2Cl−(aq)+MnO2(s)⟶Mn2+(aq)+Cl2(g)+2H2O(l)
Classify each reactant in the chemical equations as an oxidizing agent, a reducing agent, or neither. O2, MnO2, ZnS, Cu2+, H2S, Cl−, H+
Calculate the increase or decrease in the oxidation state for each element listed as it changes from a reactant to a product. Use a negative sign to show a decrease in oxidation state.
sulfur, beginning in the reactant ZnS. = ___________
sulfur, beginning in the reactant H2S = ___________
chlorine, beginning in the reactant Cl− = ____________
manganese, beginning in the reactant MnO2 = _________
In the chemical equations, the reactants can be classified as follows:
1. O2 is an oxidizing agent as it gains electrons and gets reduced.
2. MnO2 is an oxidizing agent as it gains electrons and gets reduced.
3. ZnS is a reducing agent as it loses electrons and gets oxidized.
4. Cu2+ is an oxidizing agent as it gains electrons and gets reduced.
5. H2S is a reducing agent as it loses electrons and gets oxidized.
6. Cl- is a reducing agent as it loses electrons and gets oxidized.
7. H+ is an oxidizing agent as it gains electrons and gets reduced.
Now, let's calculate the increase or decrease in the oxidation state for each element as it changes from a reactant to a product:
1. Sulfur, beginning in the reactant ZnS, has an oxidation state of -2. In the product SO2, sulfur has an oxidation state of +4. The change in oxidation state is +4 - (-2) = +6.
2. Sulfur, beginning in the reactant H2S, has an oxidation state of -2. In the product CuS, sulfur has an oxidation state of -2. The change in oxidation state is -2 - (-2) = 0.
3. Chlorine, beginning in the reactant Cl-, has an oxidation state of -1. In the product Cl2, chlorine has an oxidation state of 0. The change in oxidation state is 0 - (-1) = +1.
4. Manganese, beginning in the reactant MnO2, has an oxidation state of +4. In the product Mn2+, manganese has an oxidation state of +2. The change in oxidation state is +2 - (+4) = -2.
So the oxidation state changes are:
Sulfur in ZnS = +6
Sulfur in H2S = 0
Chlorine in Cl- = +1
Manganese in MnO2 = -2
#SPJ11
Learn more about oxidizing agent: What is an oxidizing agent? https://brainly.com/question/14041413
fluorine gas and water vapor react to form hydrogen fluoride gas and oxygen. what volume of hydrogen fluoride would be produced by this reaction if of fluorine were consumed?
A volume of 2.28 liters of hydrogen fluoride would be produced by this reaction if 1 gram of fluorine was consumed.
The balanced chemical equation for the reaction:
F₂(g) + H₂O(g) → 2HF(g) + O₂(g)
From this equation, we see that 1 mole of fluorine reacts to form 2 moles of hydrogen fluoride.
The given mass of fluorine is not provided in the question. Let's suppose the mass of fluorine is 1 gram.
To convert 1 gram of fluorine to moles, we will use its molar mass. The molar mass of fluorine is 18.998 g/mol.
Hence,1 g F₂ × (1 mol F2/18.998 g F₂) = 0.0526 mol F₂
Since 1 mole of F2 reacts to form 2 moles of HF, the number of moles of HF produced will be:
0.0526 mol F₂ × (2 mol HF/1 mol F₂) = 0.1052 mol HF
We need to assume some values for pressure and temperature. Let's assume that the pressure is 1 atm and the temperature is 273 K.
We will also need to know the volume of water vapor involved in the reaction.
Let's suppose that the volume of water vapor is 1 L.
Using these assumptions, we can calculate the volume of hydrogen fluoride as follows:
PV = nRT
Where P = 1 atm, V is the volume of HF, n = 0.1052 mol, R = 0.0821 L atm/mol K, and T = 273 K.
Substituting these values, we get:
V = (nRT)/P = (0.1052 mol × 0.0821 L atm/mol K × 273 K)/1 atm = 2.28 L
Therefore, 2.28 liters of hydrogen fluoride would be produced by this reaction if 1 gram of fluorine was consumed.
Learn more about molar mass here:
https://brainly.com/question/837939
#SPJ11
How many formula units are contained in 0. 67 grams of CaO?
There are approximately 7.15 x 10^21 formula units of CaO present in 0.67 grams of CaO.
Calculate the molar mass of CaO, which is the sum of the atomic masses of calcium and oxygen,
Molar mass of CaO = (1 x atomic mass of Ca) + (1 x atomic mass of O)
Molar mass of CaO = 56.08 g/mol
Convert the given mass of CaO to moles using the molar mass,
Moles of CaO = Mass of CaO / Molar mass of CaO
Moles of CaO = 0.0119 mol
Use Avogadro's number to convert moles of CaO to formula units,
Formula units of CaO = Moles of CaO x Avogadro's number
Formula units of CaO = 0.0119 mol x 6.022 x 10^23 formula units/mol
Formula units of CaO = 7.15 x 10^21 formula units
To know more about formula units, here
brainly.com/question/20704685
#SPJ4
each of the following pairs of solutions produces a reaction. for each reaction, write the balanced molecular and net ionic equations, and classify the reaction as a precipitation, neutralization, gas-forming, or redox reaction. a. sodium carbonate and hydrochloric acid b. silver nitrate and copper c. nickel(ii) bromide and ammonium sulfide d. phosphoric acid and barium hydroxide
A. The reaction is a neutralization reaction.
B. The reaction is a redox reaction.
C. The reaction is a precipitation reaction.
D. The reaction is a neutralization reaction.
The balanced molecular and net ionic equations are below.
A. Sodium Carbonate and Hydrochloric Acid:
The molecular equation is:
Na₂CO₃ + 2HCl → 2NaCl + H₂O + CO₂
The net ionic equation is:
2H⁺ + CO₃²⁻ → H₂O + CO₂
This reaction is a neutralization reaction, producing salt and water.
B. Silver Nitrate and Copper:
The molecular equation is:
2AgNO₃ + Cu → 2Ag + Cu(NO₃)₂
The net ionic equation is:
2Ag⁺ + Cu → 2Ag + Cu²⁺
This reaction is a redox reaction, in which copper metal is produced from copper ions.
C. Nickel(II) Bromide and Ammonium Sulfide:
The molecular equation is:
NiBr₂ + (NH₄)₂S → NiS + 2NH₄Br.
The net ionic equation is:
Ni²⁺ + 2Br⁻ + 2NH₄⁺ + S²⁻ → NiS + 2NH₄Br.
This reaction is a precipitation reaction, in which a solid salt is formed.
D. Phosphoric Acid and Barium Hydroxide:
The molecular equation is:
2H₃PO₄ + 3Ba(OH)₂ → Ba₃(PO₄)₂ + 6H₂O
The net ionic equation is:
6H⁺ + 3Ba²⁺ + 6OH⁻ → Ba⁺ + 6H₂O.
This reaction is a neutralization reaction, producing salt and water.
To know more about the neutralization reaction, refer here:
https://brainly.com/question/28970253#
#SPJ11
generally speaking, what should the rf value of your desired compound be to get a good separation in a column chromatography experiment?
Generally speaking, a good separation will result when the RF value of the desired compound is within the range of 0.2 to 0.8 in a column chromatography experiment.
The RF value is a ratio of the distance a compound has moved on a chromatogram to the distance the solvent front moved.
The distance a compound travels is measured from the starting point to the centre of the spot. The RF value is used to compare substances and can be used to determine whether two or more compounds are identical.
The RF value can be influenced by various factors including solvent composition, the type of adsorbent used, and the temperature of the chromatography experiment. The solvent composition is the most important factor that affects the RF value.
The polarity of the solvent used is an important factor, as polar solvents are better at dissolving polar compounds, while nonpolar solvents are better at dissolving nonpolar compounds.
The type of adsorbent used in chromatography is also important, as different adsorbents have different polarities and will attract different compounds differently.
The temperature at which the chromatography is performed is also important, as different compounds have different boiling points and may be affected differently by changes in temperature.
To know more about RF value refer here:
https://brainly.com/question/17796724#
#SPJ11