Explanation:
A non-example of estuary would be a mountain range since estuaries are areas where freshwater and saltwater mix, typically where a river flows into the ocean.
A non-example of edge effect would be a deep ocean since edge effect refers to the changes that occur at the boundary between two different ecosystems, such as a forest and a field.
A non-example of eutrophication would be a desert because eutrophication is the process of excessive nutrients, usually from human activities like agricultural run-off, causing an overgrowth of algae and other plants in bodies of water. In a desert, there is typically not enough water to support significant plant growth, let alone an overgrowth.
Imagine bacteria being able to divide every hour. After 1 hour there would be 2 bacteria. After 2 hours there would be 4 bacteria. After 24 hours there would be 16 million bacteria. If there is nothing there to limit to growth, the bacteria would continue to grow at a rapid rate. The following example represents which type of growth? A. Stationary growth B. Exponential growth C. Logistic growth D. Meiosis
Exponential (Log) Phase: Bacterial cells move into the exponential and log phase after the lag phase. The cells are currently dividing via binary fission and multiplying by two after each generation.
Correct option is. B.
What type of bacteria grows the fastest?For instance, the generation time for the fastest-growing bacterium, Clostridium perfringens, is approximately 10 minutes; for the fastest-doubling bacterium, Escherichia coli, the generation time is 20 minutes; and for the slowest-growing bacterium, Mycobacterium tuberculosis, the generation time is between 12 and 16 hours.
What is the average rate of bacterial growth?In ideal conditions, Coli can double their population in 20 minutes, demonstrating the astounding rates of reproduction that bacteria are capable of. This means that in the lab, very large population numbers can be reached in a matter of hours; investigations in the lab frequently use population densities of around 109 cells per milliliter of culture medium.
To know more about binary fission visit:
https://brainly.com/question/7639952
#SPJ1
which statement describes a characteristic of independent assortment
The correct response is D. Independent assortment does not depend on the arrangement of tetrads during meiosis to determine which chromosomes daughter cells get.
What is chromosome?Chromosomes are components of a cell's nucleus that house the genetic material, or genes, that make up an organism. DNA (deoxyribonucleic acid) and proteins make up chromosomes, which are in charge of passing genetic information from one generation to the next during cell division.
Genetic differences between siblings originate from various chromosomal combinations from one parent. Independent assortment, which occurs during meiosis, is the random division and distribution of homologous chromosomes. It produces genetically varied gametes with various arrangements of maternal and paternal chromosomes. This indicates that the chances of each gamete obtaining either the maternal or paternal copy of a specific chromosome are equal.
This indicates that the chances of each gamete obtaining either the maternal or paternal copy of a specific chromosome are equal. Siblings may therefore have various chromosomal combinations that they inherit from their parents, resulting in genetic diversity.
To know more about chromosome, visit:
brainly.com/question/1596925
#SPJ1
Using medical terminology,define few radiological or interventional tests and state in which common medical conditions the test are being suggested by doctors
Answer:
Here are a few radiographic or interventional tests, as well as the typical medical diseases for which they are recommended:
X-ray: An X-ray is a type of imaging test that employs ionising radiation to create images of the inside of the body. For diseases such as fractured bones, pneumonia, or dental issues, doctors may recommend an X-ray.
Computed Tomography (CT) scan: A diagnostic technique that produces comprehensive pictures of the body using X-rays and computer technologies. A CT scan may be recommended by a doctor for problems such as head injuries, abdominal discomfort, or cancer.
Magnetic Resonance Imaging (MRI): A noninvasive diagnostic technique that produces detailed pictures of the body using a strong magnetic field and radio waves. An MRI may be recommended by a doctor for illnesses such as brain and spinal cord injuries, malignancies, and infections.
Ultrasound: A noninvasive diagnostic technique that produces pictures of the interior of the body using high-frequency sound waves. Ultrasounds may be recommended by doctors for illnesses such as pregnancy, stomach discomfort, or breast lumps.
PET scan: A sort of imaging examination that employs a radioactive material known as a tracer to check for illness in the body. A PET scan may be recommended by a doctor for problems such as cancer, heart disease, or brain abnormalities.
To know more about this:
https://brainly.com/question/14011287?referrer=searchResults
DNA renaturation (hybridization) can be used to:
Question 8 options:
a) None of the other answer options is correct.
b) cleave long fragments of DNA into smaller fragments for analysis.
c) determine the degree of similarity between two DNA samples.
d) amplify small samples of DNA by replicating them.
e) determine the nucleotide sequence of a DNA strand.
Answer:
The answer is C
Explanation:
Ace This :)
5. How did animals become trapped in the La Brea Tar Pits?
The La Brea Tar Pits are naturally occurring asphalt seeps located in Los Angeles, California.
The tar pits were formed when crude oil deposits seeped to the surface through fissures in the Earth's crust. The asphalt would then trap any animals that came into contact with it.
As the animals struggled to free themselves, they would sink further into the asphalt and become completely trapped. The La Brea Tar Pits have been an important site for paleontologists because the asphalt preserved the bones of animals that were trapped there over thousands of years, providing a unique glimpse into the prehistoric ecosystem of the region.
To know more about Earth's crust, visit:
https://brainly.com/question/6285356
#SPJ1
This bio molecule is mostly directly responsible for
BIOLOGY ASSIGNMENT TITLE
Binary fission produces daughter cells that do not have an exact replica of parental DNA is not a true statement about binary fission.
option A.
What is binary fission?Binary fission is a method of asexual reproduction used by bacteria and archaea, in which a single cell divides into two identical daughter cells. During binary fission, the cell's DNA replicates, and the two copies move to opposite ends of the cell.
The cell then elongates and eventually divides into two identical daughter cells, each with an exact replica of the parental DNA. Binary fission is a rapid and efficient way for bacteria and archaea to reproduce and is responsible for the exponential growth of bacterial populations.
Thus, in binary fission, the parental DNA replicates, and the two copies separate to opposite ends of the cell. The cell then elongates and eventually splits into two identical daughter cells, each with an exact replica of the parental DNA. Therefore, option A is not true.
Learn more about binary fission here: https://brainly.com/question/983753
#SPJ1
In any genetic cross, you can calculate the probability that one of several events will occur. Using the sum rule what is the probability that the offspring will show the dominant phenotype?
A 3 X 1/4 = 3/4
B 1/4 X 1/4 = 1/2
C 3:4 = 75%
D 1/4 + 1/4 + 1/4 = 3/4
Using the sum rule, the probability of that the offspring will show the dominant phenotype is A) 3 X 1/4 = 3/4.
How to calculate gene probability?The sum rule states that the probability of any one of two or more mutually exclusive events occurring is the sum of their individual probabilities. In this case, the two possible events are either the offspring will show the dominant phenotype or they will show the recessive phenotype. Since dominant is the most likely phenotype, we can assume that the dominant allele is present in one of the parents.
If we represent the dominant allele as "B" and the recessive allele as "b," and if one of the parents is heterozygous (Bb) and the other is homozygous recessive (bb), then the possible genotypes of the offspring are:
BB (dominant phenotype) - 1/4 chance
Bb (dominant phenotype) - 1/2 chance
bb (recessive phenotype) - 1/4 chance
Since the dominant phenotypes are BB and Bb, the probability of offspring showing the dominant phenotype is the sum of the probabilities of BB and Bb, which is 1/4 + 1/2 = 3/4 or 75%.
Therefore, the correct answer is A) 3/4.
Find out more on gene probability here: https://brainly.com/question/29104437
#SPJ1
How many changes would be needed in the base parts would be needed to specify the substitution of amino acids in a polypeptide chain that is 146 amino acids long?
In this case, 46 changes would be needed because there are 146 amino acids in the chain. This is because each residue is made up of 3 base parts.
If only one residue is changed in a chain, all of its three base parts must be changed as well.
Therefore, 146 changes would be needed to specify the substitution of amino acids in a poly-peptide chain that is 146 amino acids long.
I need help please. Answering the question is helpful
Answer:
Explanation:
b
In scenario 4, what if the genes responsible for creating digestive juices were turned on in your veins? Use this example to explain the importance of regulating gene expression.
If the genes responsible for creating digestive juices were turned on in your veins, it would lead to an abnormal expression of these genes, which could result in severe health problems.
Why is regulating gene expression important ?The body's cells have specific genes that are responsible for producing specific proteins, enzymes, or other molecules necessary for the cell's normal functioning. The expression of these genes is tightly regulated, and their activation or deactivation depends on various factors such as environmental cues, signaling molecules, and other regulatory factors.
In this case, if the genes responsible for creating digestive juices were turned on in your veins, the veins' inner lining would start producing digestive enzymes meant to be secreted by the stomach or other digestive organs. This would be an abnormal expression of these genes since veins are not supposed to produce digestive enzymes.
Find out more on gene expression at https://brainly.com/question/20682055
#SPJ1
Tucked away in a valley surrounded by steep mountains is the small town of Rjukan in Norway. Because of its location, it gets sunlight only about six months out of the year. Not much! But the townspeople have a solution. On one of the mountains, they’ve installed three huge mirrors to direct sunlight to the town square below during the dark months.What other ways could directed sunlight be used to solve a problem? Use examples in your explanation.
Directed sunlight can be used in many creative ways to solve various problems.
How can directed sunlight be used to solve problems?Directed sunlight can be used to solve a variety of problems, especially in situations where natural light is scarce or inadequate.
Here are a few examples:
Enhancing plant growth: In regions where sunlight is limited or unreliable, farmers can use directed sunlight to improve crop yield. By installing mirrors or other light-reflecting materials, farmers can direct sunlight towards their crops, providing the plants with more light and helping them grow faster and healthier.
Melting snow and ice: In regions where snow and ice accumulate heavily, directed sunlight can be used to help melt the snow and ice more quickly. This can help prevent dangerous ice dams and roof collapses, as well as make roads and sidewalks safer for pedestrians and drivers.
Solar cooking: In areas with limited access to traditional cooking fuels like wood or charcoal, directed sunlight can be used to cook food. By focusing sunlight onto a cooking surface, solar cookers can reach temperatures high enough to boil water or cook food, without producing harmful emissions.
Learn more about directed sunlight here: https://brainly.com/question/5263380
#SPJ1
The structural layers of Earth (lithosphere, asthenosphere, etc.) are determined by which of the following?
Question
A. What they look like
B. What they sound like
C. Their physical properties
D. When they were discovered
Answer:
C. Their physical properties
Explanation:
layers:
(inside the earth)
Inner Core solid iron nickel hot 5,200°C.
Outer Core liquid layer iron nickel hot 5,000°C.
D''' Layer 2 layers, inside mantle, weird seismic waves.
Lower Mantle silicon, oxygen, magnesium iron 3700°C.
Upper Mantle silicon, oxygen, magnesium, and iron 2,200°C.
Mohorovičić Discontinuity (Moho) crust & mantle meet, and it has a sudden change in how seismic waves travel due to the difference in the density and composition of the crust and the mantle.
Crust outside layer thinnest &coolest lighter elements oxygen, silicon, and aluminum 400°C.
(outside the earth)
Why are these "rules of thumb" sometimes unreliable?
Answer:
Rules of thumb are not scientific and do not take into account the individual circumstances and needs of a person, so they may not be applicable to your particular situation.
"Rules of thumb" are general guidelines or heuristics that people use to make quick decisions or judgments. While they can be helpful in many situations, they are sometimes unreliable for several reasons, such as limited or outdated information.
What are the rules of thumb?One of the reasons why rules of thumb can be unreliable is that they may be based on limited or outdated information. For example, a rule of thumb about the stock market that was popular in the 1980s may no longer apply due to changes in the market or economic conditions. Another reason why rules of thumb can be unreliable is that they may oversimplify complex situations. For instance, a rule of thumb about how to succeed in business that focuses solely on working hard may not take into account the importance of networking.
Hence, they are sometimes unreliable for several reasons, such as limited or outdated information.
Learn more about the rules of thumb here.
https://brainly.com/question/9220387
#SPJ2
Answer the following questions.
2. Name three plants that reproduce through stem cuttings?
Answer:
Mint: Mint is an herb that is commonly grown for its aromatic leaves, which are used in cooking and tea. It is easy to propagate from stem cuttings, which can be taken in the spring or summer.
Spider plant: Spider plants are popular houseplants that are known for their long, thin leaves that dangle from the stem like spiders. They are easy to propagate from stem cuttings, which can be taken in the spring or fall.
Rosemary: Rosemary is an herb that is commonly used in cooking and has a fragrant, pine-like aroma. It can be propagated from stem cuttings taken in the summer or fall. Rosemary cuttings should be taken from new growth that is still green and not yet woody.
Identify the power house of a cell.
Answer:
mitocondria
Explanation:
Why does the 3rd step of cellular respiration generate so much more ATP than the first 2 steps combined? a. because oxygen is involved b. because a concentration gradient is created c. because the sugar is decarboxylated d. all of the above
All of these factors contribute to the high ATP yield of the electron transport chain.The correct answer is d. all of the above.
What is an electron transport?
The third step of cellular respiration is the electron transport chain, which takes place in the mitochondria and generates a large amount of ATP. The reasons why it generates so much more ATP than the first two steps combined (glycolysis and the Krebs cycle) are:
a. Oxygen is involved - the electron transport chain uses oxygen as the final electron acceptor, which allows for the transfer of electrons to occur more efficiently and generates a larger proton gradient.
b. A concentration gradient is created - as electrons move down the electron transport chain, protons are pumped across the inner mitochondrial membrane, creating a concentration gradient of protons. This gradient can be used by ATP synthase to generate ATP.
c. The sugar is decarboxylated - during the Krebs cycle, carbon dioxide is released as a byproduct, which reduces the amount of energy that can be extracted from glucose.
All of these factors contribute to the high ATP yield of the electron transport chain.
To know more about ATP, visit:
https://brainly.com/question/174043
#SPJ1
Use this image to explain the difference between causation and correlation:
Causation shows that one thing causes another, that action A causes outcome B. The relationship on the other hand, is just a relationship in which action A is related to action B—but one event does not necessarily cause the other event to occur.
For this assignment, you will choose 1 of the 3 main areas of the brain and explain how the functions of the human body could be affected if that part of the brain was injured and not functioning properly. Please respond in complete sentences and be sure to include at least 2 effects.
Brain Stem The limbic system is situated above the brain stem. It controls crucial bodily processes like breathing, pulse, and blood pressure.
Three primary sections make up the brain:
Your cerebrum occupies the majority of your skull. It is engaged in thinking, feeling, problem-solving, and knowledge recall.At the rear of your head, beneath the cerebrum, is where your cerebellum is situated. It controls coordination and balance.The brain stem is situated beneath your cerebrum, in front of your cerebellum.The frontal lobes control movement, decision-making, and problem-solving abilities. The parietal lobes are in charge of sensation, posture, and handwriting. The temporal lobes control both hearing and memory.The visual processing system of the brain is located in the occipital lobes.
Each lobe is in charge of a particular duty. The frontal lobe is responsible for problem-solving, motor control, sentence construction, and personality traits. Processing of visual images is a function of the occipital lobe. The temporal lobe has a role in memory development, language acquisition, and hearing.
Learn more about brain stem here
https://brainly.com/question/31182274
#SPJ1
28. What disease would result if you were lacking hydroxyapatite in your bones?
Select one:
a. Calcium homeostasis
Ob. Anemia
c. Hypercalcemia
Od. Rickets
e. Ectopic assification
The disease that would result if one was lacking hydroxyapatite in the bones is Rickets (option D)
What is Hydroxyapatite?Hydroxyapatite is a mineral form of calcium and phosphate that is the main component of bone. Without hydroxyapatite, bones become weak and brittle, and a person may develop rickets. Rickets is a disease that primarily affects children and is characterized by a softening and weakening of the bones, which can lead to deformities and fractures.
What is Rickets?Rickets is a disorder that primarily affects children and is caused by a deficiency of vitamin D, calcium, or phosphate. Vitamin D is important for the absorption of calcium and phosphate from the diet, and a deficiency of this vitamin can lead to a failure of mineralization of the bones, resulting in soft and weak bones.
Learn about rickets here https://brainly.com/question/30837584
#SPJ1
Oligosaccharides are:
a. Classified as a chain of three-twenty carbons and are responsible for signaling.
b. None of the above.
Oc. Classified into either five or six carbon rings, usually responsible for the structure.
d. Classified as a chain of twenty-one carbon chains to several hundreds carbon long chains, usually used for
structure or storage.
Oligosaccharides are none of the above which is option B.
Oligosaccharides explained.Oligosaccharides are carbohydrates that consist of a short chain of simple sugar molecules (monosaccharides) linked together by chemical bonds called glycosidic linkages. They are typically composed of 3 to 10 monosaccharide units, and are sometimes referred to as "oligos" for short.
Oligosaccharides are found in a wide range of natural sources, including plants, animals, and microorganisms. They play important roles in many biological processes, such as cell-cell recognition, signaling, and as a source of energy.
Oligosaccharides are a type of carbohydrate that consists of a relatively small number of monosaccharide units (usually 3-10). They can be classified based on the type of monosaccharide units they contain, and the way in which these units are linked together. Oligosaccharides are important in many biological processes, including cell-cell recognition, signaling, and as a source of energy.
Learn more about oligosaccharides below.
https://brainly.com/question/17995235
#SPJ1
What criteria would you use to define success when designing a solution to these problems?
The effects of sigma, time, cost, and other factors. The amount of production improvement that a solution can produce is measured by its sigma impact.
In chemistry, why is there a solution?When two chemicals, known as a solvent and a solute, are combined, a solution results. Solution is the result of the union of the solute and solvent. They frequently involve the dilution of one material into another, such when salt is dissolved in water.
What is a brief explanation of a solution?A homogenous mixture from one or maybe more solutes that have been dissolved in a solvent is known as a solution. The material that a solute dissolves in to create a homogenous mixture is known as a solvent. The component that dissolves in a solvent to create a homogenous mixture is known as a solute.
To know more about Solutions visit:
https://brainly.com/question/30665317
#SPJ1
The effect that occurs during the process of muscle contraction
The act of contracting a muscle has various impacts. The length of the muscle fibres first contracts, creating force and movement.
Which action takes place when a muscle contracts?Hypothesis of Sliding Filaments for Muscle Contraction Actin and myosin protein filaments within the skeletal muscle fibre move past one another to produce a contraction after the muscle fibre is triggered by the motor neuron. The most generally recognised idea for how this happens is the sliding filament theory.
What three muscular contractions are there?Concentric, isometric, and eccentric muscular contractions are the three different types. Given that the length of the sarcomere grows during eccentric contraction, the term "contraction" may be a little deceptive.
To know more about muscle visit:-
https://brainly.com/question/2937599
#SPJ1
Which store holds the largest amount of freshwater?
a) Cryospheric stores
b) Oceanic stores
c) Atmospheric water stores
d) Groundwater stores
Answer:
About three-quarters of Earth's freshwater is stored in glaciers. Therefore, glacier ice is the second largest reservoir of water on Earth and the largest reservoir of freshwater on Earth!
Explanation:
The first is the cryosphere which represents about 68.5% of all fresh water on Earth, primarily stored in ice sheets and glaciers.Cryospheric stores the maximum amount of freshwater. Therefore, option A is correct.
How cryospheric stores hold the largest amount of freshwater?The cryosphere is part of the Earth's surface where water is in its solid forms, such as snow, ice caps, and glaciers. Although the cryosphere makes up only a small portion of the Earth's water supply, it holds the largest amount of freshwater in the world.
One reason for this is that the ice sheets in Antarctica and Greenland contain a significant amount of freshwater.
In fact, it is estimated that the Antarctic ice sheet alone contains about 70% of the world's freshwater. Similarly, glaciers and ice caps around the world also hold large amounts of freshwater. Therefore, option A is correct.
Learn more about freshwater, here:
https://brainly.com/question/1652768
#SPJ2
Active trasport move particles in and out of the cell
Answer:
In active transport, the particles move across a cell membr ane from a lower concentration to a higher concentration. Active transport is the energy-requiring process of pumping molecules and ions across membranes "uphill" - against a concentration gradient.
Explanation:
Answer:
Your answer is: against the concentration gradient
Explanation:
________ Data includes descriptions, observations, and explanations.
Answer: Scientific
Explanation: Scientific Data includes descriptions, observations, and explanations.
3.
Describe FOUR ways in which the photograph shows the effects of forces on
the car.
Answer:
here are four ways in which a photograph could show the effects of forces on a car:
Deformation: If the car has been involved in a collision or accident, the photograph may show visible signs of deformation, such as crumpled metal, dented or smashed windows, or misaligned parts. This is an indication of the force of the impact on the car.
Skid marks: If the car has skidded or slid across a surface, the photograph may show skid marks or tire tracks on the ground. This is evidence of the force of friction between the tires and the surface, as well as the force of the car's momentum.
Airbag deployment: If the car has been in a collision, the photograph may show the airbags deployed. This is evidence of the force of the impact on the car and the force of the airbags deploying to protect the occupants.
Fluid leaks: If the car has been damaged, the photograph may show fluids leaking from the car, such as oil, coolant, or transmission fluid. This is evidence of the force of the impact on the car, which may have caused damage to the engine or other systems, resulting in the leaks.
How do prokaryotes evolve so fast? Give two reasons and explain them. I am looking for a short paragraph of 3-5 sentences.
Answer:
1.Because of the speed of bacterial cell division,
2.Prokaryotes can extremely adapt to a new or harsh environment...
3. If you want to observe a strand of hair, which of the following should you do first?
A.Cover the microscope.
B.Adjust the mirror
C.Look through the eyepiece
D.Place the hair on a glass slide
Answer:
The first step to observe a strand of hair is (D) to place the hair on a glass slide.
How could a garden store owner determine what light conditions are needed for a particular flowering plant to bloom?
Even though a plant may be able to endure low light levels for growing, more light may be needed to encourage thick foliage and flowering.
A garden shop owner could ascertain the quantity and quality of natural light in their area to ascertain the lighting requirements for a specific flowering plant to bloom.
After that, users can select plants whose lighting needs match those of their indoor environment.
How does photosynthesis work?
Green plants and certain other species use photosynthesis, a process that uses sunlight and chlorophyll to create food.
Describe chlorophyll.
The majority of plants, algae, and cyanobacteria have the green pigment called chlorophyll. It is crucial to the process of photosynthesis, which is how plants turn light energy into chemical energy.
To know more about chlorophyll visit:
brainly.com/question/13500580
#SPJ1