What is an Alkanoate?​

Answer:

Mass of CaCl2 = 4.1625 grams

Explanation:

We will recall that:

For solution: Molarity = [tex]\dfrac{moles \ of \ solute }{volume \ of \ solution (L)}[/tex]

[tex]1.5 = \dfrac{moles}{0.025 }[/tex]

Moles = 0.0375 moles

Mass = no of moles × molar mass(MM)

Molar mass of CaCl2 = 111 g/mol

Mass = 0.0375 mol × 111 g/mol

Mass of CaCl2 = 4.1625 grams

Answer:

Nitrogen dioxide does not rekindle a glowing splinter becuase it is a not a very good oxidant. However, it will support the combustion of burning substances that are able to decompose it into nitrogen and oxygen gas.

NO₂ (g) ----> N₂ (g) + O₂

The oxygen then produced will go ahead to rekindle the glowing splinter.

Explanation:

Nitrogen dioxide isa reddish brown gas that is given when trioxiponitrate (v) salts, for example Lead (ii) trioxonitrate (v) of heavy metals are heated.

It is an mild oxidizing agent due to the presence of oxygen in the molecule of the compound.

It does not support combustion and does not burning air because of the inertnesss of the nitrogen atom. However, it will support the combustion of burning substances that are able to decompose it into nitrogen and oxygen gas.

For example, phosphorus is a very combustible material due to its low ignition temperature of 35°C. It catches fire spontaneously in air. Nitrogen dioxide is decomposed by burning phosphorus to nitrogen and oxygen. The oxygen produced supports further combustion of the burning phosphorus.

NO₂ (g) ----> N₂ (g) + O₂

Answer: not 100% sure.

Explanation:

My exploration in one specific element as well as the sharing of the historical context and modern day application will be focused in the element Carbon. The essay is written below

Carbon was discovered by the ancient Egyptians, and it gets its name from the Latin word "carbo," which means "charcoal."

Carbon is a nonmetal that is located in Group 14 of the periodic table. It has a unique ability to form a wide variety of chemical compounds, which is one of the reasons it is so important in modern chemistry. Carbon has four valence electrons, which allows it to form stable chemical bonds with other elements.

Carbon is a chemical element that is found in all living things. It is a key component of proteins, DNA, and other essential biomolecules. Carbon can exist in several different forms, including graphite, diamond, and various forms of carbon-based compounds called organic molecules.

Carbon has many important implications for society. It is used as a fuel to produce energy, and it is also a key ingredient in the production of steel and other metals. Carbon is also an essential component of many plastics and other synthetic materials. However, carbon can also have negative impacts on the environment, as the burning of fossil fuels releases carbon dioxide into the atmosphere, contributing to climate change.

Carbon has many practical applications, including its use as a fuel, a structural material, and a chemical feedstock. However, carbon can also be hazardous in certain situations. For example, inhaling carbon monoxide can be deadly, and carbon dust can be explosive. Carbon is commonly encountered in many different forms, including coal, oil, and natural gas.

Personally, I think that carbon is a very interesting element with a wide range of important applications. It is fascinating to consider the role that carbon plays in the biology of living organisms, as well as its practical uses in industry and technology.

Some questions for my classmates might include: What are some other interesting properties of carbon that you have learned about? Can you think of any examples of how carbon is used in your everyday life? Do you think that the benefits of carbon outweigh the potential drawbacks?

One peer-reviewed resource that I found informative is "The Many Forms of Carbon," an article published in the journal Chemical & Engineering News. (Citation: "The Many Forms of Carbon." Chemical & Engineering News, vol. 95, no. 39, 2017, pp. 38-54.)

Learn more about Carbon from

https://brainly.com/question/20994647
#SPJ1

Answer:

a

Explanation:

The formation of ion occurs when an atom that is said to be neutral gains or losses electrons.

At the time it gains electrons, it is regarded that a negative ion (anion) is formed.

When it loses electron, it is regarded that a positive ion (cation) is formed.

Atomic number = No of protons and electrons occurring in a neutral atom.

Given that:

Protons = 14

electron = 18

Net Charge = no of proton - no of electron

= 14 - 18

= -4

Mass number = 14 + 15 = 29

So, the chemical symbol = [tex]Si^{-4}[/tex]

For ion with

27 proton, 32 neutrons and 25 electrons

Net charge = 27 - 25

= +2

Mass number = 27 + 32 = 59

Thus, the chemical symbol = [tex]Co^{+2}[/tex]

Answer:

Reactants collide to form a transition state.

Explanation:

So sorry if I’m wrong but I feel this is right

To solve such this we must know the concept of chemical reaction. The correct option is option B that is atoms in one compound switch places with atoms in another compound.

Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved.

There are so many types of chemical reaction reaction like combination reaction, double displacement reaction, combustion reaction, displacement reaction. "Reactants collide to form a transition state" describes the first part of a chemical reaction.

Therefore "Reactants collide to form a transition state" describes the first part of a chemical reaction. The correct option is option B.

Learn more about the chemical reactions, here:

https://brainly.com/question/3461108

#SPJ2

Answer: what is the answer

Explanation:

I need it nowwww

Answer:

110k because 2 x 110 =220

Answer:

wow okay um so first you go home, get in bed, never open that computer again

Explanation:

Answer:

The answer is lithium bromide because it is the combination of a metal (lithium) and a nonmetal (bromine). The indicator that this is the correct name, rather than lithium bromate, is that the compound is composed of only two elements and does not contain oxygen. Yes, this is why NaNO3 is Sodium Nitrate; it is composed of three different elements (sodium, nitrogen, and oxygen).

Explanation:

Answer:

umm use a calculator ok bye

Answer:

Property of an element by virtue of which it exists in two or more forms which differ only in their physical properties is known as allotropy. Allotropes are the different physical forms in which the element can exist. Allotropes are different physical forms of the same element.

Also-

Allotropes are different forms of the same element in the molecular level. Isotopes are different forms of atoms of the same chemical element. The key difference between allotropes and isotopes is that allotropes are considered at the molecular level, whereas isotopes are considered at the atomic leve

Explanation:

~Hope this helps~

Answer:

3.3atm is the new pressure of the container

Explanation:

In the car, the temperature of the container increases from 25°C  =298K to 55°C = 328K. To solve this question we must use the Boyle's law that state that the pressure of a gas is directly proportional to its absolute temperature under constant volume. The equation is:

P1T2 = P2T1

Where P is pressure and T absolute temperature of 1, initial state of the gas and 2, final state.

Replacing:

P1 = 3atm

T2 = 328K

P2 = ?

T1 = 298K

3atm*328K = P2*298K

P2 = 3.3atm is the new pressure of the container

Answer:

3.3 atm

Explanation:

First we convert 25 °C and 55 °C to K:

We can solve this problem by using Gay Lussac's law, which states that at constant volume:

Where in this case:

We input the data:

And solve for P₂:

The vapor pressure at 49.5 °C is:

DP = 48.8 kJ/mol / 8.314 J/mol*K * (1/451.0 K - 1/322.65 K) * 49.5

DP = 0.24 torr (approx)

The vapor pressure of benzaldehyde at 49.5°C is approximately 0.24 torr.

The heat of vaporization (ΔHvap) and the normal boiling point (Tb) can be used to determine the vapor pressure of a liquid at a given temperature using the Clausius-Clapeyron equation. The Clausius-Clapeyron equation states that the change in vapor pressure (DP) with temperature (DT) is directly proportional to the heat of vaporization (ΔHvap) and inversely proportional to the absolute temperature (T) in kelvin.

DP/DT = ΔHvap / R * (1/T)

where R is the gas constant.

We can use this equation to solve for the vapor pressure of benzaldehyde at 49.5°C.

First, convert 49.5°C to kelvin:

T = 49.5°C + 273.15 = 322.65 K

Next, we need to use the Clausius-Clapeyron equation to solve for vapor pressure at a temperature T and the normal boiling point Tb:

DP/DT = ΔHvap / R * (1/T) = ΔHvap / R * (1/Tb - 1/T)

DP = ΔHvap / R * (1/Tb - 1/T) * DT

The vapor pressure at 49.5 °C is:

DP = 48.8 kJ/mol / 8.314 J/mol*K * (1/451.0 K - 1/322.65 K) * 49.5

DP = 0.24 torr (approx)

The vapor pressure of benzaldehyde at 49.5°C is approximately 0.24 torr.

Learn more about vapor pressure in brainly.com/question/11864750

#SPJ1

The vapor pressure of the benzaldehyde is  196 torr.

We know that the vapor pressure would have to do with the ease that we can use to convert the substance that is in question from liquid to gas. When we have two substances that are at different temperatures than we have;

ln(P2/P1) = -ΔH/R(1/T1 - 1/T2)

P2 = final pressure

P1 = initial pressure

R = gas constant

T1 = initial temperature

T2 = final temperature

Thus;

ln(P2/1) = -48.8* 10^3/8.314(1/451 - 1/322.5)

lnP2 = -5869.6(0.0022 - 0.0031)

lnP2 = 5.28

P2 =e^5.28

P2 = 196 torr

Learn more about vaporization:https://brainly.com/question/14480429

#SPJ1

A synthetic ingredient is a substance that has been synthesized in a lab using different chemical procedures. Its goal is to mimic a natural chemical to duplicate its structure and, consequently, its fragrance.

In most cases, it refers to a naturally occurring substance, like hyaluronic acid, which was formerly extracted from animals and has now been molecularly copied in a laboratory to provide the same results. Not everything that is manufactured or chemical is inherently harmful to you. Although not all synthetic cosmetic components are the same, some have been proven to be toxic, accumulate in the body over time, and have been associated with cancer as well as irritations of the skin and mucous membranes.

To know more about synthetic ingridient, check out:

https://brainly.com/question/29774084

#SPJ1

-33⁰C

Explanation:

Charles Law states V/T initial = V/T final

T must be in Kelvin.

100/300 = 80/x

(27⁰C + 273 = 300

100x = (300)(80)

100x = 24,000

x = 240⁰K

240 - 273 = -33⁰C

Answer:

4.76×10¯⁵ cm

Explanation:

We'll begin by converting 476 nm to m. This can be obtained as follow:

1 nm = 1×10¯⁹ m

Therefore,

476 nm = 476 nm × 1×10¯⁹ m / 1 nm

476 nm = 4.76×10¯⁷ m

Finally, we shall convert 4.76×10¯⁷ m to cm. This can be obtained as follow:

1 m = 100 cm

Therefore,

4.76×10¯⁷ m = 4.76×10¯⁷ m × 100 cm / 1 m

4.76×10¯⁷ m = 4.76×10¯⁵ cm

Thus,

476 nm = 4.76×10¯⁵ cm

Answer: C) All of the rabbits in a forest, as well as their predators and food plants

Explanation:

The community refers to all living things in a certain area including plants and animals. If the given area is a forest therefore, the rabbit being a living thing, as well as its predators and the plants that it relies on will be considered the community.

This is not unlike a human community where everyone in a given area is considered to be part of the community.

Answer:

C

Explanation:

I got this question on an edusmart.

Answer:

A

Explanation:

Solute is what is being dissolved.

Solute is cocoa powder when we make a cup of hot chocolate ,therefore option (a) is correct.

A solute is a substance that is dissolved in a solvent to form a solution.

The concentration of a solute in a solution is a measure of how much of the solute is dissolved in the solvent.

Characteristics of solute -:

Solute is cocoa powder when we make a cup of hot chocolate ,hence option (a) is correct.

Learn more about solutes ,here:

https://brainly.com/question/24277980

#SPJ5

The nonmetals in the Groups 16 and 17 gain electrons making them an anion.

The nonmetals of group 16 are made up of Oxygen, Sulfur, and Selenium whereas group 17, also called the halogen group is made up of Fluorine, Chlorine, etc.

The further right we go in the periodic table, the atomic size decreases. Due to the increase in the number of protons, the electrons are more tightly bound and the atom shows strong attraction to electrons.  

The gain of additional electrons helps in the completion of octets for the atoms further making their configuration stable, and more alike to that of the noble gases.

To learn more about electron gain click here:

brainly.com/question/14351799

#SPJ1

Answer:

Explanation:

To break apart a molecule of H2So4 is much higher than HCl although HCl is an ionic bond it is only bonded to one hydrogen. While H2So4 is bonded to two of them, aswell as its structure being much more complex. The energy to break Ba(h)2 is equal in both.

Bi-phosphate detergents

Hypochlorous

Answer:

Hello your question is incomplete attached below is the complete question

answer : attached below

Explanation:

The design is attached below

The reagents are : H₂SO₄, H₂O,  HBr,  NaOCH₂CH₃

For the scheme = 1.NaOH,H2O   2. H₃O+3,   heat,  SOCl₂,  Et3N

Answer:

3.4

373.4

.45.=2

46.=3 .6.2=4

Answer:

A. By the circumference of the epicenter

Explanation:

If the Earth's lithospheric plates begin to move slowly, stresses emanate in the crust, most at times close to the plate boundaries. These stresses (compression, tension strain, and shear) accumulate in the crust until they surpass the rock's strength or the pressure around an internal fault. And there's a sudden slippage of rock around a fault.

The planet shakes and the rocks lurch to their new position in a matter of seconds as the stress energy is released. Seismic waves move away from the broken portion of the fault, just like ripples from a pebble landing on calm water.

Seismologists may estimate when the slippage started on a fault, the area of the slipping fault, the sum of slippage or fault throw (i.e. just how much the crust moved), and the length of time it takes for the slippage to happen by measuring the circumference of the epicenter which is the mapped area where the earthquake is taken place.

Answer:

-1396 kJ

Explanation:

Let's consider the following balanced equation.

4 NH₃(g) + 7 O₂(g) ⇒ 4 NO₂(g) + 6 H₂O(l)

We can calculate the standard change in enthalpy for the reaction (ΔHr) using the following expression.

ΔHr = ∑ np × ΔHf(p) - ∑ nr × ΔHf(r)

where,

ΔHr = 4 mol × ΔHf(NO₂(g)) + 6 mol × ΔHf(H₂O(l)) - 4 mol × ΔHf(NH₃(g)) - 7 mol × ΔHf(O₂(g))

ΔHr = 4 mol × (34 kJ/mol) + 6 mol × (-286 kJ7mol) - 4 mol × (-46 kJ/mol) - 7 mol × (0 kJ/mol) = -1396 kJ

The new volume of the system can be found to be 4.9 L.

We have to know that we do use the Boyle's law when we are trying to get the association that we know that does exist when we are looking at the volume and the pressure of the gas and the both can be shown to be inversely proportional.

We then have that;

Initial pressure(P1) =  765 mmHg

Initial volume (V1) = 5 L

Final pressure (P2)= 780 mmHg

Final volume (V2) = ?

Then;

P1V1 = P2V2

V2 = 765 * 5/780

V2 = 4.9 L

As such, we can see from the calculation that the new volume that we would obtain is 4.9 L

Learn more about Boyle's law:https://brainly.com/question/1437490

#SPJ1

Atoms are made up of a very tiny, positively charged nucleus that is encircled by a sea of negatively charged electrons. Despite often being less than a tenth of an atom's size, the nucleus makes up more than 99.9% of the atom's mass.

The term "atomic structure" describes the structure of an atom, which has a nucleus (centre) that contains both protons (positively charged) and neutrons (neutral). The centre of the nucleus is circled by the negatively charged electrons.

Positively charged protons, negatively charged electrons, and neutral neutrons make up the three types of subatomic particles that make up an atom. Nearly equal in mass, protons and neutrons are found in the dense nucleus of the atom.

Thus, Atoms are made up of a very tiny, positively charged nucleus that is encircled by a sea of negatively charged electrons.

To learn more about an atom, follow the link;

https://brainly.com/question/29695801

#SPJ1