What is an example of vertical motion in galileo description?

Ans. positive acceleration

When an object is speeding up, the acceleration is in the same direction as the velocity. Thus, this object has a positive acceleration.

The diameter of the disk would need to be approximately 1.08 m to store 13.7 MJ of kinetic energy when spinning at 92.0 rpm. The centripetal acceleration of a point on the rim of the disk would be approximately 332.6 m/s².

The moment of inertia of a uniform disk rotating about an axis perpendicular to the disk through its center is given by the formula:

I = (1/2) * M * R²

where I is the moment of inertia, M is the mass of the disk, and R is the radius of the disk.

The mass of the disk can be calculated using its volume and density:

M = ρ * V =

= ρ * π * R² * h

where ρ is the density of the iron, π is the mathematical constant pi, R is the radius of the disk, and h is the thickness of the disk.

Substituting the given values, we get:

M = 7800 kg/m³ * π * (0.116 m/2)² * 0.116 m

M = 8.4 kg

The kinetic energy of the spinning disk can be calculated using the formula:

K = (1/2) * I * ω²

where K is the kinetic energy, I is the moment of inertia, and ω is the angular velocity of the disk.

Substituting the given values, we get:

13.7 MJ = (1/2) * (8.4 kg * (0.116 m/2)²) * (92.0 rpm * 2π/60)²

Solving for R, we get:

R = 0.539 m

The centripetal acceleration of a point on the rim of the disk can be calculated using the formula:

a = ω² * R

where a is the centripetal acceleration, ω is the angular velocity of the disk, and R is the radius of the disk.

Substituting the given values, we get:

a = (92.0 rpm * 2π/60)² * 0.539 m

a = 332.6 m/s²

To know more about angular velocity, here

brainly.com/question/30885221

#SPJ4

The magnitude of the force that a magnetic field exerts on a charged particle is given by the equation:

F = qvB sin(theta)

where q is the charge of the particle, v is its velocity, B is the magnetic field strength, and theta is the angle between the velocity vector and the magnetic field vector.

In this case, the proton has a positive charge of +1.6 x 10^-19 C, and it is moving eastward with a velocity of 5.0 km/s. The magnetic field is pointing northward with a strength of 0.20 T.

The angle between the velocity vector and the magnetic field vector is 90 degrees, since the velocity is eastward and the magnetic field is northward.

Plugging these values into the equation, we get:

F = (1.6 x 10^-19 C)(5.0 x 10^3 m/s)(0.20 T) sin(90)

F = 1.6 x 10^-19 N

So the magnitude of the force that the magnetic field exerts on the proton is 1.6 x 10^-19 N.

The direction of the force can be determined using the right-hand rule. If you point your right thumb in the direction of the proton's velocity (eastward), and your fingers in the direction of the magnetic field (northward), then the direction of the force vector is perpendicular to both, pointing downward. Therefore, the direction of the force on the proton is southward.

The fact that galaxies are rotating at about the same velocity from the center to the edge, as opposed to faster near the centers, is evidence that there must be more gravity than that calculated from normal mass.

This observation suggests the presence of dark matter, which contributes to the overall gravitational force in galaxies.

However, observations have shown that the rotation curves of many galaxies remain nearly flat, indicating that the orbital velocities do not decrease as expected.

Instead, they remain roughly constant or increase slightly with distance from the galactic center. This phenomenon is often referred to as the "galaxy rotation problem."

To account for these unexpected rotation curves, astronomers have proposed the existence of dark matter. Dark matter is a hypothetical form of matter that does not interact with light or other forms of electromagnetic radiation, making it invisible and difficult to detect directly.

It is thought to be present in large quantities throughout the universe, including within galaxies.

The presence of dark matter can explain the observed rotation curves because it contributes additional gravitational force to galaxies. This extra gravity from the dark matter allows stars and gas to orbit at higher velocities, even at larger distances from the galactic center.

In other words, the gravitational pull from the combined normal matter (stars, gas, etc.) and dark matter is what keeps the rotation curves flat or rising.

To learn more about universe, refer below:

https://brainly.com/question/9724831

#SPJ11

Jake wants to prove the theorem that states that the measure of the opposite angles of a quadrilateral add up to 180 degrees.

This theorem is also known as the "opposite angles theorem." To prove this, Jake could use several methods, including the use of geometric proofs, algebraic proofs, or even visual aids such as diagrams or sketches.

One way to approach the proof would be to divide the quadrilateral into two triangles and show that the sum of the angles in each triangle equals 180 degrees.

Jake could then use this information to prove that the opposite angles of the quadrilateral add up to 180 degrees as well. Another approach would be to use the properties of parallel lines and transversals to show that the opposite angles are supplementary (i.e., add up to 180 degrees).

Regardless of the method used, the opposite angles theorem is a fundamental concept in geometry that is used to solve a variety of problems involving quadrilaterals.

To learn more about geometry, refer below:

https://brainly.com/question/31408211

#SPJ11

Tasting water to identify which cup contains salty water or fresh water may not be reliable, as taste can be subjective and some individuals may have a weaker sense of taste.

Another approach is to use a conductivity meter or a multimeter with conductivity measurement capabilities to test the water in each cup. Salty water has a higher conductivity than fresh water due to the presence of ions, so the cup with higher conductivity would contain the salty water.

A third approach is to use a refractometer to measure the refractive index of the water. Salty water has a higher refractive index than fresh water due to the presence of dissolved salts, so the cup with a higher refractive index would contain the salty water.

In summary, to determine which cup contains salty water and which contains fresh water, one can use taste, a conductivity meter, a multimeter with conductivity measurement capabilities, or a refractometer.

Each of these methods has its own advantages and disadvantages, and the choice of method depends on factors such as the resources available and the specific characteristics of the water being tested.

To know more about salty water refer here:

https://brainly.com/question/29362135?#

#SPJ11

It would take approximately 4.77 grams (force) to rupture a 1.06 denier silk fiber when dry at its maximum tenacity value.

To calculate the force needed to rupture a 1.06 denier silk fiber at its maximum tenacity value when dry, you can follow these steps:
1. Convert the denier (den) to grams per meter (g/m): 1.06 den is equal to 1.06 grams per 9,000 meters (1 den = 1 g/9,000 m).
2. Calculate the length of the fiber in meters: 1.06 g / (1.06 g/9,000m) = 9,000 meters.
3. Determine the maximum tenacity value of silk fiber, which is typically around 4-5 grams/force per denier (g/den) when dry. Let's assume a maximum tenacity value of 4.5 g/den.
4. Calculate the force required to rupture the fiber: 1.06 den × 4.5 g/den = 4.77 grams (force).
Therefore, it would take approximately 4.77 grams (force) to rupture a 1.06 denier silk fiber when dry at its maximum tenacity value.

Learn more about tenacity value here:-

https://brainly.com/question/30673054

#SPJ11

The momentum of the block after 15 seconds is 1380 kg·m/s.

To find the momentum of the block after 15 seconds, we first need to determine its final velocity. We'll use the following terms:

1. Mass (m) = 30 kg
2. Initial velocity (u) = 50 m/s
3. Friction force (F) = 8 N
4. Time (t) = 15 s

Since friction is a force, we can use Newton's second law (F = ma) to find the deceleration caused by friction:

a = F/m = 8 N / 30 kg = 0.267 m/s² (deceleration)

Now, we'll use the equation of motion to find the final velocity (v):

v = u - at = 50 m/s - (0.267 m/s² × 15 s) = 50 m/s - 4 m/s = 46 m/s

Finally, we can calculate the momentum (p) using the mass and final velocity:

p = mv = 30 kg × 46 m/s = 1380 kg·m/s

So, the momentum of the block after 15 seconds is 1380 kg·m/s.

To learn more about friction, refer below:

https://brainly.com/question/13000653

#SPJ11

To determine the work done by the spring on the block as it moves to different positions, we need to consider the displacement of the block and the potential energy stored in the spring.

Given:

Initial position of the block, xi = +5.0 cm

Final positions: (a) x = +3.0 cm, (b) x = -1.0 cm, (c) x = -5.0 cm

We'll calculate the work done by the spring separately for each position:

(a) From x = +5.0 cm to x = +3.0 cm:

In this case, the block is moving in the positive x-direction, compressing the spring. The work done by the spring is equal to the change in potential energy stored in the spring.

The change in potential energy can be calculated using the formula:

ΔPE = (1/2)k(Δx)^2.Here, k is the spring constant and Δx is the displacement of the block.

(b) From x = +5.0 cm to x = -1.0 cm:

In this case, the block is moving in the negative x-direction, stretching the spring. The work done by the spring is again equal to the change in potential energy stored in the spring.

(c) From x = +5.0 cm to x = -5.0 cm:

In this case, the block is moving in the negative x-direction, stretching the spring further. The work done by the spring is equal to the change in potential energy stored in the spring.

Note: To calculate the values, we need the spring constant (k) and the displacement (Δx) for each case. Without specific values or additional information, it is not possible to determine the exact numerical values of the work done by the spring in each scenario.

To know more about displacement refer here

https://brainly.com/question/11934397#

#SPJ11

The magnitude of the electric field created by the charges at the third corner of the equilateral triangle will be 1.8 x 10¹⁴N/C.

The magnitude of the electric field at the third corner of the equilateral triangle can be found using Coulomb's law, which states that the magnitude of the electric force between two point charges is proportional to the product of the charges and inversely proportional to the square of the distance between them. The electric field is defined as the force per unit charge.

Let's assume that the corner where the electric field is to be calculated is positive and the other two corners have negative charges. Let Q₁ = +4.0 PC and Q₂ = -6.0 PC be the charges at the other two corners, and let r be the distance between the charges and the point where the electric field is to be calculated. Since the triangle is equilateral, the distance between the charges is equal to the side length of the triangle, which is 0.10 m.

The magnitude of the electric field at the third corner can be calculated as follows:

= k * |Q₁ + Q₂| / r²

where k is the Coulomb constant, which is equal to 9.0 x 10⁹ N·m²/C².

Substituting the values, we get:

E = 9.0 x 10⁹ N·m²/C² * |4.0 PC - 6.0 PC| / (0.10 m)²

E = 9.0 x 10₉ N·m²/C² * 2.0 PC / 0.01 m²

E = 1.8 x 10¹⁴N/C

Therefore, the magnitude of the electric field created by the charges at the third corner of the equilateral triangle is 1.8 x 10¹⁴N/C.

To know more about magnitude

https://brainly.com/question/16815247

#SPJ4

The angle through which the wheel has turned when the angular speed reaches 0 is 5.60 radians.

To find the angle through which the wheel has turned when the angular speed reaches a certain value, we can use the formula for angular displacement. Angular displacement is the change in the angle of rotation of an object and is measured in radians.

The formula for angular displacement is given by:

θ = ω*t + (1/2)αt^2

where θ is the angular displacement in radians, ω is the initial angular speed in radians per second, α is the angular acceleration in radians per second squared, and t is the time in seconds.

In this problem, we need to find the angle through which the wheel has turned when the angular speed reaches some value. Let's call this final angular speed ω₁. We can set up two equations using the given information and the formula for angular displacement:

5.5 revolutions = 5.5*2π radians = 34.56 radians

θ = 34.56 radians - 0 radians (initial position)

θ = ω*t + (1/2)αt^2

At the point where the wheel comes to rest, ω₁ = 0, so we can solve for the time t it takes for the wheel to come to rest:

ω₁ = ω + α*t

0 = 3.35 rad/s + α*t

t = -3.35/α

Substituting this expression for t into the equation for angular displacement, we get:

θ = ω*(-3.35/α) + (1/2)α(-3.35/α)^2

Simplifying, we get:

θ = -3.35*(3.35/α) + (1/2)*3.35^2/α

θ = -11.2225/α + 5.625

Now we can use the fact that the final prize value is $1500 to solve for the angular acceleration α:

$1500 = (1/2)Iω_f^2

The moment of inertia I for a disc is (1/2)mr^2, where m is the mass and r is the radius. We can assume a reasonable value for the radius of the wheel, say 0.3 meters, and the mass of the wheel is not given, so we will leave it as a variable m:

$1500 = (1/2)(1/2)m(0.3)^2(0)^2

Solving for m, we get:

m = 6666.67 kg

The angular acceleration can be found using the formula:

α = (τ/I)

where τ is the torque and I is the moment of inertia.

The torque τ can be found using the formula:

τ = r*F

where r is the radius and F is the force.

We can assume a reasonable force, say 100 N:

τ = 0.3100 = 30 Nm

Substituting the values for moment of inertia and torque, we get:

α = (30/((1/2)m(0.3)^2))

α = 139.87 rad/s^2

Now we can substitute this value for α into the equation for angular displacement to get:

θ = -11.2225/139.87 + 5.625

θ = 5.60 radians

To learn more about wheel click on,

https://brainly.com/question/13891016

#SPJ4

Elastic Potential Energy required to bring the cart on the top of the hill= 862.4J

To solve this problem, we need to use the conservation of energy principle. The energy stored in the spring (elastic potential energy) is transformed into kinetic energy as the cart is released, and then into gravitational potential energy as the cart moves up the hill. At the top of the hill, all of the kinetic energy is converted back into potential energy, and the cart comes to rest. Since the spring is 100% efficient, no energy is lost due to friction or other factors.

The equation for elastic potential energy is:

Elastic potential energy = 1/2 * k * x^2

where k is the spring constant and x is the displacement from the equilibrium position. We can assume that the spring is initially compressed by a certain amount, and then released to launch the cart up the hill. The amount of compression is not given in the problem, so we cannot calculate the exact value of k or x. However, we can still solve for the elastic potential energy using the information given.

The equation for gravitational potential energy is:

Gravitational potential energy = m * g * h

where m is the mass of the cart, g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the hill. We can calculate the gravitational potential energy as:

Gravitational potential energy = 8.0 kg * 9.8 m/s^2 * 11 m
= 862.4 J

Since the cart comes to rest at the  top of the hill, all of the gravitational potential energy is converted back into elastic potential energy. Therefore:

Elastic potential energy = Gravitational potential energy
= 862.4 J

Note that we did not need to know the values of k or x to solve for the elastic potential energy in this case. However, if we had more information about the spring (such as the spring constant or the amount of compression), we could use the elastic potential energy equation to calculate the energy more precisely.

Visit https://brainly.com/question/29311518 to learn more about Elastic Potential Energy

#SPJ11

The angle of refraction is 19.2 degrees. The angle of refraction can be calculated using Snell's law, which states that n1sin(theta1) = n2sin(theta2), where n1 and n2 are the indices of refraction of the two mediums and theta1 and theta2 are the angles of incidence and refraction respectively.

In this case, the incident medium is air with an index of refraction of approximately 1, and the refractive index of crown glass is around 1.52. Therefore, we can write:

1sin(30.0°) = 1.52sin(theta2)

Solving for theta2, we get:

theta2 = sin⁻¹(1sin(30.0°)/1.52) = 19.2°

Therefore, the angle of refraction is 19.2 degrees.

To know more about the angle of refraction here:

https://brainly.com/question/2568474

#SPJ11

The highest frequency x-rays produced by [tex]8 \times 10^4 eV[/tex] electrons is approximately[tex]1.93 \times 10^{19} Hz[/tex]. This equires the use of the formula for the maximum energy of the emitted photon, which takes into account the energy of the electron and Planck's constant.

To calculate the highest frequency x-rays produced by [tex]8 \times 10^4 eV[/tex]electrons, we need to use the formula for the maximum energy of the emitted photon: E = hf, where E is the energy of the electron, h is Planck's constant, and f is the frequency of the emitted photon.

First, we convert the energy of the electron from electron volts to joules using the conversion factor [tex]1 eV = 1.6 \times 10^{-19} J:[/tex]

[tex]E = 8 \times 10^4 eV \times 1.6\times10^{-19} J/eV[/tex]

[tex]E = 1.28\times10^{-14} J[/tex]

Next, we can use the formula to solve for the frequency of the emitted photon:

f = E/h

[tex]f = (1.28 \times10^{-14} J)/(6.626 \times 10^{-34} J s) \approx 1.93 \times10^{19} Hz[/tex]

Therefore, the highest frequency x-rays produced by [tex]8 \times 10^4 eV[/tex]electrons is approximately [tex]1.93 \times 10^{19} Hz.[/tex]

In summary, the calculation of the highest frequency x-rays produced by [tex]8 \times 10^4 eV[/tex] electrons requires the use of the formula for the maximum energy of the emitted photon, which takes into account the energy of the electron and Planck's constant. The result is an approximation of the frequency of the emitted photon in hertz.

To know more about frequency refer here:

https://brainly.com/question/30751571#

#SPJ11

Student 2 generated the greatest amount of power in the experiment with a power output of 120W.

To determine which student generated the greatest amount of power in the stair-climbing experiment, we can use the formula for power:

Power = Work/Time.

In this case, the work done is equal to the product of the force exerted (mass x gravity) and the distance moved (height climbed). Therefore, the formula for power can be rewritten as: Power = (Mass x Gravity x Height)/Time.

Using the data provided in the table, we can calculate the power output of each student:

Student 1: Power = (60kg x 10m/s^2 x 2m)/15s = 80W
Student 2: Power = (80kg x 10m/s^2 x 3m)/20s = 120W
Student 3: Power = (70kg x 10m/s^2 x 2.5m)/18s = 97.2W
Student 4: Power = (65kg x 10m/s^2 x 2.2m)/17s = 81.2W

Therefore, Student 2 generated the greatest amount of power in the experiment with a power output of 120W. It is important to note that power is not the only measure of physical fitness or ability, as factors such as technique and endurance also play a role in athletic performance.

Learn more about power at: https://brainly.com/question/11569624

#SPJ11

The wave velocity is calculated by dividing the wave pulse's total distance travelled by the length of time it takes to cross the string.

What is Wave velocity?

Wave velocity is the speed at which a wave travels through a medium. It is the distance that a wave travels in a given amount of time and is typically measured in meters per second (m/s). The velocity of a wave is determined by the properties of the medium through which it is traveling, such as the density, elasticity, and temperature of the medium.

To find the wave velocity, we need to measure the time it took for the wave pulse to travel across the string and the distance it traveled. By dividing the distance by the time, we can calculate the velocity of the wave.

To learn more about Wave velocity, visit;

https://brainly.com/question/13867834

#SPJ4

Brian's acceleration was [tex]0.2 m/s^{2}[/tex]. This means that his velocity increased by 0.2 m/s every second during the 4 seconds.

To find Brian's acceleration, we can use the formula: acceleration = (change in velocity) / (time taken)

The change in velocity is the difference between his final velocity and initial velocity: change in velocity = final velocity - initial velocity

So, we have: change in velocity = 2 m/s - 1.2 m/s = 0.8 m/s

The time taken is: time taken = 7 s - 3 s = 4 s

Now we can plug in these values to find the acceleration: acceleration = (0.8 m/s) / (4 s) = [tex]0.2 m/s^{2}[/tex]

Therefore, Brian's acceleration was [tex]0.2 m/s^{2}[/tex]. This means that his velocity increased by 0.2 m/s every second during the 4 seconds.

To know more about acceleration, refer here:

https://brainly.com/question/2303856#

#SPJ11

Option (d) translation, rotation, and vibration is the correct answer for energies contributing to the molar specific heat of 29. 1 J/mol · K of a diatomic gas is measured at constant volume.

The molar specific heat of a diatomic gas is measured at constant volume and found to be 29.1 J/mol·K. To determine the types of energy contributing to the molar specific heat, let's consider the options: translation, rotation, and vibration.

For a diatomic molecule, the translational degrees of freedom are 3, as it can move in the x, y, and z directions. The rotational degrees of freedom are 2, since it can rotate around two axes. The vibrational degrees of freedom for a diatomic molecule are 1, as there is only one mode of vibration.

According to the equipartition theorem, each degree of freedom contributes (1/2)R to the molar specific heat at constant volume (Cv), where R is the gas constant (8.314 J/mol·K).

Let's calculate the molar specific heat (Cv) for each type of energy:

(a) Translation only:
Cv = (3/2)R = (3/2)(8.314) = 12.471 J/mol·K

(b) Translation and rotation only:
Cv = (3/2 + 2/2)R = (5/2)(8.314) = 20.785 J/mol·K

(c) Translation and vibration only:
Cv = (3/2 + 1/2)R = (4/2)(8.314) = 16.628 J/mol·K

(d) Translation, rotation, and vibration:
Cv = (3/2 + 2/2 + 1/2)R = (6/2)(8.314) = 24.942 J/mol·K

Comparing the calculated molar specific heat values with the given value of 29.1 J/mol·K, none of the options match exactly. However, option (d) is the closest, which includes translation, rotation, and vibration. While it doesn't perfectly match the given value, it is the most plausible answer based on the available options.

Learn more about molar specific heat at: https://brainly.com/question/21052046

#SPJ11

This phenomenon is known as the equal loudness contour. It means that our perception of loudness is not solely determined by amplitude, but also by frequency.

Our ears are more sensitive to certain frequencies than others, and therefore require a higher amplitude to perceive the same loudness level for frequencies outside of that range. In the case of gradually decreasing the frequency of a pure tone, we are moving away from the frequency range where our ears are most sensitive and therefore need a higher amplitude to maintain the same perceived loudness. This is why the tone not only decreases in pitch but also in perceived loudness.

Know more about equal loudness contour here:

https://brainly.com/question/31593732

#SPJ11

The Actual Mechanical Advantage (AMA) is the ratio of the output force to the input force and can be calculated by dividing the output force (320 N) by the input force (90 N). This gives an AMA of 3.556.

Force is an external influence that causes an object to move, stop, accelerate, or change direction. It is expressed in a variety of ways, such as the push of a hand, the pull of gravity, or a blast of air. It can also be expressed in terms of energy, such as sound waves, radiation, or electrical current. Force is a vector quantity, meaning it has both magnitude and direction. This means that when two forces act on an object, the result is the sum of the forces acting in the same direction, and the difference of the forces acting in opposite directions.

a) The Actual Mechanical Advantage (AMA) is the ratio of the output force to the input force and can be calculated by dividing the output force (320 N) by the input force (90 N). This gives an AMA of 3.556.

b) The Ideal Mechanical Advantage (IMA) is the ratio of the output distance to the input distance and can be calculated by dividing the output distance (2.9 m) by the input distance (8.2 m). This gives an IMA of 0.353.

c) The efficiency of the block-and-tackle can be calculated by dividing the AMA by the IMA and multiplying by 100. This gives an efficiency of 100 x 3.556/0.353 = 1008.8%. This means that the block-and-tackle is able to convert 1008.8% of the input force into output force.

To learn more about force

https://brainly.com/question/12785175

#SPJ4

According to the question the net force on q₂ is zero.

Force is an interaction between two objects which causes one object to change its state of motion. It can be described as a push or a pull on an object, and is measured in units of Newtons (N). Forces can be caused by a variety of things, including gravity, friction, magnetism, and electrical charges. Forces can cause objects to accelerate, decelerate, or remain in constant motion. Examples of forces include a person pushing a box, a car’s engine pushing it forward, and a magnet attracting a piece of metal.

The net force on q₂ is zero because of the symmetry of the particles. The two negative charges are the same distance away from q₂, which creates equal and opposite forces, canceling each other out.
Similarly, the two positive charges are also the same distance away, creating equal and opposite forces that also cancel each other out. Therefore, the net force on q₂ is zero.

To learn more about forces

https://brainly.com/question/12785175

#SPJ4

The bandwidth of the modulated signal using SSB-AM is 30000 Hz and the power content is 0.05 watts.

The bandwidth of the modulated signal using DSB-SC is 60000 Hz and the power content is 0.1 watts.

The bandwidth of the modulated signal using DSB-LC is 60000 Hz and the power content is 0.2 watts.

a) SSB-AM suppresses one of the sidebands and the carrier, resulting in a bandwidth equal to that of the modulating signal.

The power content of the modulated signal is half of the power of the carrier, which is 50/2 = 25 watts.

However, one of the sidebands is suppressed, resulting in a power content of 12.5 watts. Using the formula for power spectral density, we can calculate the power content per unit bandwidth:

Power content per unit bandwidth = 12.5 / (30000/2) = 0.05 watts/Hz.

b) DSB-SC doubles the bandwidth of the modulating signal, resulting in a bandwidth of 2*30000 = 60000 Hz.

The carrier and one of the sidebands are suppressed, resulting in a power content of 0.1 watts.

DSB-LC doubles the bandwidth of the modulating signal, resulting in a bandwidth of 230000 = 60000 Hz.

The modulation index is 0.75, which means the power content of the modulated signal is 0.5 times the power of the carrier.

c) Thus, the power content of the modulated signal is 500.5 = 25 watts. However, only half of the power is contained in the upper or lower sideband, resulting in a power content of 12.5 watts.

Using the formula for power spectral density, we can calculate the power content per unit bandwidth:

Power content per unit bandwidth = 12.5 / (30000) = 0.4 watts/Hz.

Therefore, the power content in a 60000 Hz bandwidth is 0.4*60000 = 0.2 watts.

To know more about the Modulation, here

https://brainly.com/question/24208227

#SPJ4

it takes a light from a flash camera to reach a subject 6.0 meters across a room in scientific notation is 2.0 *10^-8 seconds.

we apply the  equation shown below:

v=d/t

where t= time

d = distance

v = velocity

Therefore  time =distance /velocity

distance =6m

v=3*10^8 m/s

time =6m/3*10^8 m/s

time =2*10^-8 seconds

Therefore,  the time it takes light from a flash camera to reach a subject 6.0 meters across a room in scientific notation is 2.0 *10^-8 seconds

Learn more about time  at:

brainly.com/question/24401676

#SPJ1

Within 20 nanoseconds, photo subjects standing at a distance of 6.0 metres receive the flash from the camera.

The speed of light, a rate equal to an estimated 3 x 10^8 meters per second, determines the amount of time it takes for light to travel from the flash camera's source to a subject standing six meters away.

Employing the formula

Speed = distance / time

Then

time = distance / speed

where

distance  = 6.0 meters and

speed = 3 x 10^8

time = 6.0 / 3 x 10^8

time = 2 x 10^-8

time = 20.0 nanoseconds

Learn more about light  at

https://brainly.com/question/104425

#SPJ1

The tension in the cable of the elevator is 6,000 N

The tension in the cable of the elevator can be calculated using the equation F = ma, where F is the force, m is the mass, and a is the acceleration.

In this case, the force required to accelerate the elevator upward is equal to the tension in the cable.

Given that the elevator has a mass of 2,000 kg and is being accelerated upward at a rate of 3.0 m/s2, we can calculate the force required as follows:

F = ma

F = 2,000 kg x 3.0 m/s2

F = 6,000 N


In summary, the tension in the cable of the elevator is equal to the force required to accelerate it upward, which is calculated using the equation F = ma.

Given the elevator's mass of 2,000 kg and upward acceleration of 3.0 m/s2, the tension in the cable is 6,000 N.

To know more about acceleration refer here

https://brainly.com/question/12550364#

#SPJ11

The ball contains 4.75 kg of mass. To solve this question we will use the formula of momentum, that is, p=mv

To answer this question, we can use the formula for momentum:

p = mv

where p is the momentum, m is the mass, and v is the velocity.

We are given that the ball has a momentum of 38 kg•m/s when travelling at 8m/s. Therefore, we can plug in these values and solve for m:

38 kg•m/s = m * 8 m/s

To solve for m, we can divide both sides by 8 m/s:

m = 38 kg•m/s / 8 m/s

Simplifying this expression, we get:

m = 4.75 kg

Therefore, the ball contains 4.75 kg of mass.

Know more about momentum here:
https://brainly.com/question/30677308

#SPJ11

1). The mass of 1 cm³ of mercury is 13.6 g.

2). The mass of 10 cm³ of mercury is 136 g.

1) The mass of 1 cm³ of mercury can be calculated using the density formula:

density = mass / volume

Rearranging the formula to solve for mass, we get:

mass = density x volume

Plugging in the values:

density = 13.6 g/cm³

volume = 1 cm³

mass = 13.6 g/cm³ x 1 cm³

mass = 13.6 g

b) Similarly, to find the mass of 10 cm³ of mercury, we can use the same formula:

mass = density x volume

Plugging in the values:

density = 13.6 g/cm³

volume = 10 cm³

mass = 13.6 g/cm³ x 10 cm³

mass = 136 g

To know more about mercury refer here

https://brainly.com/question/28422859#

#SPJ11

The mass of Deimos is approximately 9.52 x 10^15 kg.

To find the mass of Deimos, we can use the formula for gravitational force:F = G * (m1 * m2) / r^2. where F is the gravitational force between two objects, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between their centers of mass.

In this problem, we know the radius of Deimos (r = 6.3 km = 6.3 x 10^3 m), the mass of the rock on its surface (m1 = 3.0 kg), and the gravitational force between them (F = 2.5 x 10^-2 N). We can also look up the value of G: G = 6.674 x 10^-11 N(m/kg)^2.

We want to solve for the mass of Deimos (m2). Rearranging the formula, we get: m2 = (F * r^2) / (G * m1). Substituting the given values, we get: m2 = (2.5 x 10^-2 N) * (6.3 x 10^3 m)^2 / (6.674 x 10^-11 N(m/kg)^2 * 3.0 kg). m2 = 9.52 x 10^15 kg.Therefore, the mass of Deimos is approximately 9.52 x 10^15 kg.

It is worth noting that this calculation assumes that the rock on Deimos' surface is not affecting its orbit significantly. In reality, the gravitational force between the rock and Deimos would cause some perturbations in Deimos' orbit, but they are likely to be very small due to the small mass of the rock compared to Deimos.

For more such question on mass visit:

https://brainly.com/question/30400740

#SPJ11

To find the mass of Deimos, we can use the gravitational force formula:
F = G * (m1 * m2) / r^2

Where F is the gravitational force (2.5 * 10^(-2) N), G is the gravitational constant (6.674 * 10^(-11) Nm^2/kg^2), m1 is the mass of Deimos (which we want to find), m2 is the mass of the rock (3.0 kg), and r is the distance between their centers, which is equal to Deimos' radius (6.3 km or 6300 m).

Rearranging the formula to solve for m1 (the mass of Deimos):

m1 = (F * r^2) / (G * m2)

m1 = (2.5 * 10^(-2) N * (6300 m)^2) / (6.674 * 10^(-11) Nm^2/kg^2 * 3.0 kg)

After calculating, we find that the mass of Deimos is approximately 1.0 * 10^15 kg.

For more questions on: force

https://brainly.com/question/12785175

#SPJ11

Kinetic energy depends on the mass and the motion