Answer:
the number in front of the chemical
Explanation:
example: 4c is 4 carbon 4 os the coefficient of c
rate is always positive; it is defined as the change in concentration of reactants or products over a period of time. the only time a negative sign is used is when expressing the change in concentration of a reactant over time, such as −δ[a]/δt for the reaction a→b.
For the rate of reaction a negative sign is used is when expressing the change in concentration of a reactant over time, such as −δ[a]/δt for the reaction A→B. Because the concentration of the reactant goes on decreasing with the time to form product.
What is Rate of the Reaction?The rate of reaction is defined as the rate of change of concentration of product and the concentration of reactant.
Let us considered a chemical reaction:
A → B
It can also be said that, rate of reaction is directly proportional to the concentration of reactant.
R = δ[B]/δt = -δ[A]/δt
Rate of the product is always positive because the concentration of the product always increases with time.
Thus, we concluded that due to continue decrease in the concentration of the reactant goes with time to form product, the rate of reaction expressed with a negative sign.
learn more about rate of reaction:
https://brainly.com/question/8592296
#SPJ4
What is the process that wears away the surface of the earth?
Answer:
erosion
Explanation:
erosion is when the top layer of the earth gets slowly worn away bhy water and ither stuff.
When looking for a mathematical relationship between two variables use a
When looking for a mathematical relationship between two variables use a line graph.
What is a mathematical variable?
A mathematical variable is one that can be found by the use of algebra or by a the use of graph. We know that a line graph involves plotting the independent variable on the horizontal axis and the dependent variable on the vertical axis.
The relationship between the two variables can be determined by studying how much the data set suits a particular equation of line of best fit or by considering the correlation coefficient of the scatter plot.
Hence, when looking for a mathematical relationship between two variables use a line graph.
Learn more about mathematical variable:https://brainly.com/question/26576272
#SPJ1
Missing parts;
When looking for a mathematical relationship between two variables, use a _____.
A. line graph
B. circle graph
C. bar graph
D. data table
choose the true statement(s) about ions. to be marked correct, you’ll need to select all true statements, as there may be more than one correct answer.
Cations have more protons than electrons, Anions result when atoms gain an electron.
What are electrons ?The electron, a subatomic particle, has a negative one elementary charge electric charge. The electron, a member of the first generation of the lepton particle family, is usually regarded as an elementary particle because it has no known components or substructure.
How electrons are in an atom ?A few straightforward rules can be used to calculate the quantity of protons, neutrons, and electrons present in an atom. The atomic number and the number of protons in the atom's nucleus are equal (Z). A neutral atom has the same number of protons and electrons as protons.
Around the nucleus, electrons are positioned in several shells. Only a fixed amount of electrons can fit in each subsequent shell. Filling begins with the innermost shell.
To know more about nucleus visit :
https://brainly.com/question/23366064
#SPJ4
URGENT!! What is the consequence of carbon's unique bonding ability?
It can only bond with a select few elements.
It is very rarely found in molecules.
Only one carbon atom can be present in a molecule at a time.
It forms the basic building blocks of organic molecules.
It forms the basic building blocks of organic molecules this is the carbon's unique bonding ability
Carbon is an essential building block of organic molecules. this is because it has a unique molecular structure that allows it to form many strong bonds with itself and other crucial elements and it is typically combined with hydrogen to form hydrocarbons and hydrocarbons can have single, double, or triple bonds between carbon atoms. carbon atoms can form four covalent bonds and it make strong bond because any molecule are formed with carbon so is does't found rarely in molecule and only one carbon is not present in molecule at a time there are so many carbons are present
Know more about carbon
https://brainly.com/question/28640221
#SPJ1
A car is driving down a road. Is it possible for its position to be changing and its acceleration to be zero? Is it possible for its velocity to be changing and its accelera- tion to be zero? Explain.
Answer:
Yes. As soon as acceleration disappears, the object just continues with whichever speed it has. The acceleration changes speed; is there no acceleration, then speed is constant.
Explanation:
1.1 Which of the following statements is FALSE? As the temperature of the gas in the container increases,... A the molecules move more quickly. B the molecules expand. C the molecules collide more often. D the molecules move further apart.
Answer:
d is false
Explanation:
because when the Temperature of gas in the container increases the molecule increases or expands and collide
What is the average atomic mass of a sample of Calcium, if you have 37
atoms of Calcium-40 and 10 atoms of Calcium-41?
The calculated answer is 40x2/6.023x10²³
Calcium is a mineral that is most frequently linked to strong bones and teeth, but it also plays a critical role in blood clotting, assisting with muscular contraction, and regulating regular heartbeats and nerve activity. Calcium has a 40g molar mass (mass of 1 mole). I'm assuming that all you're looking for is the mass of two calcium atoms, which is incredibly little:
A mole of calcium weighs 40g and contains 6.023 x 10²³ atoms.
There would be 1.328x10-22 g of calcium if 2 calcium atoms have a mass of 40x2/6.023x10²³.
Learn more about calcium here-
https://brainly.com/question/4023397
#SPJ9
a. Write chemical formula of copper (I) oxide, iron (III) carbonate, and magnesium sulfate
b. Calculate the proportion by mass of the elements in each compound.
(Given: M(Cu) = 64 M(Fe) = 56 M(S) = 32 M(Mg) = 24 M(O) =16 M(C) = 12)
Chemical Formula : It is the method of showing the information about the chemical proportion of atoms of a given element.
Types of Chemical Formula : There are three types namely
1. Molecular
2. Empirical
3. Structural
a. The chemical formula of the given compound asked in the problem are :
i. Copper (II) oxide - CuO
ii. Iron (III) Carbonate - Fe2(CO3)3
iii. Magnesium Sulphate - MgSO4
b. The proportion by mass of the given compound are :
i. CuO = Atomic mass of copper and oxygen are = 64 and 16
so, mass proportion = 64 / 16 = 4 : 1
ii. Iron Carbonate : = 14 :1
iii. Magnesium Suphate - 24 / 32 = 3:4
To know more about Chemical Formula here :
https://brainly.com/question/11995171?referrer=searchResults
#SPJ1
What is the atomic mass of Hafnium if in a sample, 10 have mass 176 amu, 38 have mass
177 amu, 54 have mass 178 amu, 28 have mass 179 amu, and 70 have mass 180 amu?
The atomic mass of Hafnium is 357.1amu and atomic mass is the total mass of the subatomic particles in an atom and is measured in atomic mass units
Here given data is if in a sample, 10 have mass 176 amu, 38 have mass 177 amu, 54 have mass 178 amu, 28 have mass 179 amu, and 70 have mass 180 amu then
The atomic mass is a weighted average of all of the isotopes of that element, in which the mass of each isotope is multiplied by the abundance of that particular isotope
We have to find average atomic mass = ?
Average atomic mass = atomic weight of Hafnium/100
Now we can substitute the known values
Then, Average atomic mass = (176×10)+(177×38)+(178×54)+(179×28)+(180×70)/100
Average atomic mass = 357.1amu
357.1amu is the atomic mass of Hafnium
Know more about atomic mass
https://brainly.com/question/6986147
#SPJ1
what mass of sodium azide is required to produce 2.6 ft (73.6 l) of nitrogen gas with a density of 1.25 g/l?
When a chemical element's density and volume are known, the mass of the chemical element can be calculated by multiplying the density and volume. When determining the mass of a chemical element, the link between the quantity of moles and molar mass is occasionally used.
Volume (V) of Nitrogen gas = 73.6 lDensity (ρ) of Nitrogen gas = 1.25 g/lMolar mass of N2 = 28g/molMolar mass of sodium azide (NaN3) = 65g/molMoles (n) of N2 = mass of N2 gas/molar mass= 73.6 * 1.25/28 = 3.29 moles
2NaN3→2Na+3N2, NaN3 is breaking into 2 moles of Na and 3 moles of NaN3.Using the above equation, no. of moles of NaN3 (N) = 2/3*n = 2/3*3.29 = 2.19 molesMass of sodium azide = N*molar mass = 2.19*65 = 142.35gTherefore, the mass of sodium azide is 142.35g.
Learn more about molar mass:
https://brainly.com/question/22503632
#SPJ4
HELP ME PLEASE THIS IS SCIENCE ITS DUE SOON ONG lol
Which of these is the largest?
a chromosome
a cell
a gene
Answer:
A gene
Explanation:
A gene because you carry those traits from your parents and you keep passing those to your offsprings.
write and balance the equation showing the reaction between iron (iii) oxide and carbon monoxide to form iron (ii) oxide and carbon oxide
The balanced chemical equation showing the reaction between iron (iii) oxide and carbon monoxide to form iron (ii) oxide and carbon oxide is :
FE2O3 + 3CO → 2FE +3CO2
Two moles of iron with three moles of carbon dioxide gas are produced when one mole of iron(iii) oxide reacts with three moles of carbon monoxide
A balanced chemical equation is defined as the number of atoms of each type in the reaction being equal to the reactants and product sides.
The mass and charge is equal in a balanced chemical reaction.
If you need to learn more about the balanced chemical equation, click here
https://brainly.com/question/28294176?referrer=searchResults
#SPJ4
a sample of blood is found to contain 64.5 micrograms of valproic acid. how many milligrams of valproic acid does this blood sample contain?
The valproic acid contains 0.0645 milligrams
Conversion scale1000 microgram = 1 milligram
Data obatined from the questionFrom the question given, the following data were obtained:
Mass (in micrograms) = 64.5 microgramsMass (in milligrams) =?How to convert 64.5 micrograms to milligramsWe can convert 64.5 micrograms to milligrams as illustrated below:
1000 microgram = 1 milligram
Therefore,
64.5 micrograms = (64.5 micrograms × 1 milligram) / 1000 microgram
64.5 micrograms = 0.0645 milligrams
Thus, the valproic acid contains 0.0645 milligrams
Learn more about conversion:
https://brainly.com/question/1444594
#SPJ1
the temperature of the mesosphere is much higher than the asthenosphere overall, but yet is is still a ductile solid. what keeps it from melting?
The temperature of the mesosphere is much higher than the asthenosphere overall, but yet is is still a ductile solid. The thing that keeps it from melting is high pressure.
What is the mesosphere?The mesosphere plays a crucial role in protecting the earth. Most meteors and asteroids are destroyed by the mesosphere before they can impact the earth's surface.
An area of the Earth's atmosphere is called the mesosphere. Directly above the stratosphere and beneath the thermosphere lies the mesosphere. It covers a distance of 31 to 53 miles, or 50 to 85 kilometers, above our planet. The mesosphere's temperature falls with height.
It should be noted that this high pressure that keeps it solid in form and does not let it melt down.
Learn more about temperature on:
https://brainly.com/question/24746268
#SPJ1
The temperature of the mesosphere is much higher than the asthenosphere overall, but yet is is still a ductile solid. what keeps it from melting?
Cool temperature
Distance from the sun.
High pressure
Low pressure
Help :/
can someone explain to me how you solve this
Use atom economy to argue which of these processes may be greener.
By the principle of atom economy the second process is more efficient.
What is atom economy?We know that the atom is the smallest particle of a substance that could take part in a chemical reaction. We are also aware that all compounds are composed of atoms and that a chemical reaction has to do with the rearrangement of atoms in such a way that be products could be formed.
In this case, we know that an organic product may be obtained in a sequence of reactions and the atom economy is very important in the nature of the process that is being carried out. Let us now take good look at the two processes that could be shown.
In the first process, we can see that there are a lot of products that could just be classified as side products and does not have a real relevance to the final products. In the second process, we have only one waste product and that is water.
As such, by the principle of atom economy the second process is more efficient.
Learn more about atom economy:https://brainly.com/question/14542629
#SPJ1
3 naoh(aq) c₆h₈o₇(aq) ⇌ na₃c₆h₅o₇(aq) 3 h₂o(l) step 3: calculate the volume of titrant required to reach the endpoint. calculate the volume in ml of a 0.200 m naoh solution needed to neutralize 345 ml of 0.0333 m c₆h₈o₇ standard solution.
Volume of NaOH solution needed to neutralize C₆H₈O₇ is 56.825 ml
In titration reaction , at equivalence point
Moles of Acid = Moles of Base
If [tex]M_1[/tex] is mole of acid and [tex]V_1[/tex] is volume of acid
[tex]M_2[/tex] is moles of base and [tex]V_2[/tex] is volume of base
Then [tex]M_1 V_1 = M_2 V_2[/tex]
Here in this question
[tex]M_1 = 0.200 M\\ M_2 = 0.0333 MV_1 = unknown\\V_2 = 345[/tex]
Therefore,
[tex].200 * V_1 = 0.033 * 345 ml[/tex]
[tex]V_1[/tex] = [tex]0.033 *345 / .200[/tex]
[tex]V_1 = 56.825 ml[/tex]
To know more about titration
https://brainly.com/question/2728613
#SPJ4
Baking soda is also known as sodium hydrogen
carbonate. What is the mass of 1.00 mol of sodium hydrogen carbonate
(NaHCO.)?
Calculate the heat energy released when 29. 5 g of liquid mercury at 25. 00 °c is converted to solid mercury at its melting point. Constants for mercury at 1 atmheat capacity of hg(l) 28. 0 j/(mol⋅k) melting point234. 32 kenthalpy of fusion2. 29 kj/mol
0.3271 kJ is the heat energy released when 29. 5 g of liquid mercury at 25. 00 °c is converted to solid mercury at its melting point. Constants for mercury at 1 atmheat capacity of hg(l) 28. 0 j/(mol⋅k) melting point234. 32 k enthalpy of fusion 2. 29 kj/mol
First convert the temperature into kelvin.
25.00°C+273.15=298.15K
Now convert the hear capacity into J/g.K
28.0(j/mol.K)×1mol/200.59g
=0.1396J/g.K
Now calculate the hear transferred using the specific heat of mercury
q=mcΔT
q=(29.5g)0.1396J/gK)(234. 32 -298.15 K)
q=-262.85 j = -0.26286 Kj
The calculation would involve the enthalpy of fusion, but with a negative sign.
(29.5g Hg)(1mol/200.59g Hg)×-2.29Kj/mol= -0.064221 Kj
Add the heat transferrers of both process together
-0.26286 Kj-0.064221 Kj = -0.327081
The total heat released is 0.3271 kJ.
If you need to learn more about question related to enthalpy of fusion, click here
https://brainly.com/question/17405472?referrer=searchResults
#SPJ4
Does the mean molecular speed change as much as the temperature as the water heats up? Explain.
For each degree of temperature change, the mean molecular speed increases by about 1 m/s. At 100 °C, the mean molecular speed is about 17% faster than at 0 °C.
What is temperature ?Temperature is a numerical expression of how hot (or energetic) stuff or radiation is.
There are three different types of temperature scales: those, like the SI scale, that are defined in terms of the average translational kinetic energy per freely moving microscopic particle, like an atom, molecule, or electron, in a body; those that only depend on strictly macroscopic properties and thermodynamic principles, like Kelvin's original definition; and those that are defined by practical empirical properties of particulates rather than by theoretical principles.
Using a thermometer, one can gauge temperature. It is calibrated using different temperature scales, each of which historically defined itself using a different set of reference points and thermometric materials.
To learn more about temperature from the given link:
https://brainly.com/question/24746268
#SPJ4
molecules of i2 are produced by the reaction of 0.4321 mol of cucl2 according to the following equation. 2 cucl2 4 ki → 2 cui 4 kcl i2
[tex] \: 1.237 \times 10^{23} molecules \: of \:I _{2} \: are[/tex]
[tex]are\: produced \: and \: 53.74 \: g \: of \: I _{2} \: are[/tex]
produced from the reaction.
The overall balanced equation for the reaction is,
[tex]2CuCl_{2} + KI→2CuI + 4KCl + I_{2}[/tex]
[tex]Number \: of \: moles \: ofCuCl_{2}=0.4235 \: mol [/tex]
[tex]2 \: moles \: of \: CuCl_{2} \: produce \: \: 1 \: mole \: [/tex]
[tex]of \: I_{2}.[/tex]
[tex]2 \: mole \: of \: CuCl_{2} = 1 \: mole \: of \: I_{2}[/tex]
[tex]1 \: mole \: of \: I_{2} \: = 6.022 \times 10 ^{23} \: molecules \: of I_{2}[/tex]
So, the number of molecules produced in the reaction of
[tex] I_{2} \: are[/tex]
[tex] = \frac{0.4235 \times 6.022 \times 10 ^{23} }{2 } [/tex]
[tex] = 1.237 \times 10^{23} \: molecules \: [/tex]
[tex]1.237 \times 10^{23} \: molecules \: of \: I_{2} \: are \:[/tex]
produced from the reaction.
[tex]Mass \: of \: I _{2} \: produced \: are \: is ,[/tex]
[tex] = \frac{0.4235 \times 253.8}{2} [/tex]
[tex] = 53.74 \: g[/tex]
[tex] 53.74 \: g \: of \: I _{2} \: produced \: in \: the \:[/tex]
reaction.
[tex]Therefore , \: 1.237 \times 10^{23} molecules[/tex]
[tex]of \: I_{2} \: are\: produced \: and \: 53.74 \: g \: of[/tex]
are produced in the reaction.
To know more about moles, refer to the below link:
https://brainly.com/question/26416088
#SPJ4
Start with solid argon and explain how to make argon change to the liquid state and then to the gaseous state
Starting with solid argon at room temperature, we need to cool it to -189.2 c to convert it into the liquid state.
Then, we need to heat it slightly till it reaches a temperature of -185.7 c. At this temperature, the liquid argon will convert into gaseous argon.
There are three states of matter i.e, solid state, liquid state, and gaseous state. These states are interconvertible which means that we can convert a substance from one state to another.
The conversion from solid to liquid and then gas or vice versa happens at specific temperatures that are known as boiling point, melting point, freezing point, etc.
The melting point is the temperature at which a solid gets converted into a liquid.
The boiling point is the temperature at which a liquid gets converted into a gas.
The melting and boiling points of Argon are -189.2 °C and -185.7 °C respectively.
Thus, starting with solid argon at room temperature, we need to cool it to -189.2 °C to convert it into the liquid state.
Then, we need to heat it slightly till it reaches a temperature of -185.7 °C. At this temperature, the liquid argon will convert into gaseous argon.
To know more about "states of matter", refer to the link given below:
https://brainly.com/question/9402776?referrer=searchResults
#SPJ4
the diameter of a hydrogen atom is about 1.05 cross times 10 to the power of negative 10 and exponent meters. a protein molecule has an overall length of 3000 times (or 3 cross times 10 cubed times) the diameter of a hydrogen atom.
Consequently, the protein molecule has a length of 315 x 10^-9 metres.
An atom of hydrogen contains what?Since it just has one proton and one electron, the hydrogen atom is the most basic of all atoms. The hydrogen atom can be found in three other isotopes: protium, deuterium, and tritium, in addition to this most prevalent form.The atomic number one of the lightest element is hydrogen, abbreviated H.How do you refer to an atom of hydrogen?Three isotopes of hydrogen are known. The isotopes of hydrogen have mass numbers of 1, 2, and 3, with mass 1 being the most prevalent. This isotope is also known as protium and is commonly referred to as hydrogen (symbol H, or 1H).
learn more about hydrogen atom here
https://brainly.com/question/13796082
#SPJ4
Answer the questions please
The Newton's third law deals with action and reaction.
What is the Newton third law of motion?According to Isaac Newton, there are three laws that govern the motion of an object and this is the field that we call dynamics. They deal with the interaction of the force that acts on a body and causes it to move. Three laws of Isaac Newton deals with the various aspects of the motion of an object.
The Newton third law of motion states that action and reaction are equal and opposite. This implies that, when a force is exerted on a body, the body exerts the same magnitude of force back on the person that exerted the force but in this case, the force is acting in opposite direction.
A typical example of this law is when a gun is fired. It observed that as the bullet leaves the gun as the force acts on it, the gun has to recoil. The recoil of the gun owes to the reaction force.
Learn more about Newton’s third law:https://brainly.com/question/974124
#SPJ1
CAN SOMEONE PLS HELP PLS
an isotope of phosphorus contains 19 neutrons. construct the symbol for the isotope.
Answer:
Explanation:
The isotope Al-27 has 13 protons and 14 neutrons. Aluminium's average atomic mass is 26.981539 AMU
Which is an example of a homogeneous mixture?
A. Apple juice
B. Vegetables soup
C.Pure Gold
D. H2O (water)
Answer:
H2o water is correct please mark as brainliest
4. Indicate whether entropy increases or decreases in each of the following situations. a. The jigsaw puzzle is taken apart and put back in the box. b. Clothes are folded and put away. c. Ice turns into steam
Answer:
Entropy generally increases when a reaction produces more molecules than it started with.
Explanation:
a. The jigsaw puzzle is taken apart and put back in the box. entropy decreases
b. Clothes are folded and put away. entropy decreases
c. Ice turns into steam. entropy increases
What is entropy?Entropy is the measurement of the amount of heat energy per unit of temperature in a system that cannot be used for productive labor. Entropy is a measure of a system's molecular disorder or unpredictability since work is produced by organized molecular motion.
Entropy theory offers profound understanding of both the direction underlying spontaneous development for many commonplace events.
a. The jigsaw puzzle is taken apart and put back in the box. entropy decreases
b. Clothes are folded and put away. entropy decreases
c. Ice turns into steam. entropy increases
Therefore,
a. The jigsaw puzzle is taken apart and put back in the box. entropy decreases
b. Clothes are folded and put away. entropy decreases
c. Ice turns into steam. entropy increases
To know more about entropy, here:
https://brainly.com/question/14131507
#SPJ2
cogswell me, zhang z, carriquiry al, et al. sodium and potassium intakes among us adults: nhanes 2003-2008. am j clin nutr. 2012;96:647-657.
It has been observed that most US adult intake high levels of sodium and low level of potassium.
The American Health Association (AHA) published in its reports that US adults consume food containing more sodium and avoid food containing potassium. It causes various side effects and health-related problems. It was estimated that 99.4% of the total United States adults intake high levels of sodium on daily a basis. AHA guidelines recommend (<1500 mg) of sodium to be consumed. They consume even more than the Institute of Medicine's tolerable upper Intake level which is 2300 mg.
In the US, adults aged over 51 years or people suffering from diabetes, chronic kidney disease, or hypertension are recommended by the Dietary Guidelines to reduce sodium intake to 1500 mg per day. The overall result suggested that 98.8% consumed more than 1500 mg per day, and 60.4% consumed more than 3000 mg per day. These calculations of intake are more than double the recommendation guidelines. Only less than 2% of US adults and around 5% of US men consumed less than 4700 mg per day of potassium.
Therefore, it is concluded that the maximum US adult intake is high levels of sodium and low level of potassium.
Read more about Potassium & Sodium:
https://brainly.com/question/12544322
#SPJ4
A gas tank has a volume of 28.1 m 3 and a pressure of 18.4 atm. The temperature of the gas is 32ºC. What is the Celsius temperature when the gas is put in an 11.2 m 3 tank with a pressure of 22.7 atm?
What is the function of an organ system?
a. to work together to do a specific job
b. to be a basic unit of organization with bodies
c. to organize a group of similar cells
d. to control movement in internal organs
Answer:
A
Explanation:
eg digestive system consists of ma y organs working towarss the break down of large insoluble food molecules
Answer:
A is the answer
Explanation: