Answer:
Water and Salts
Explanation:
Because a neutralization reaction, which results in the formation of salt and water, occurs when an acid and a base react with one another. The H + ions from the acid and the OH - ions from the base combine to form water. As a result of the reaction, a solution with a neutral pH (pH = 7) is produced as the strong acids and strong bases completely dissociate.
use the Gizmo to create a path for carbon that begins and ends in the atmosphere. Fill in the steps in the path below. Then, label each location with the system it represents. Finally, summarize very briefly how the carbon atom got to that location.
Wind power was first used in the 1970s.
A. true
B. false
Answer:
B. false
Explanation:
Answer:
B (false)
Explanation:
Because, the earliest recorded evidence of wind energy being used dates to around 5000 BC in Egypt, where the sail was invented to catch the wind and propel boats along the River Nile
A chemical reaction that has the general formula of ab c → cb a is best classified as a reaction.
Answer:
single replacement
Explanation:
Single replacement is when the molecules switch with each another
for example:
Zn + CuCl₂→ZnCl₂ +Cu
Answer:
replacement
Explanation:
Question 3 someone help me please
Answer:
False ....
first of all gas is not the desirable product of combustion
4. Compare and contrast the 2 reactions below and balance the reactions. Which reaction is
endothermic and which reaction is exothermic?
The first reaction is exothermic reaction because it release energy whereas the seocond equation is endothermic reaction due to absorption of energy.
Endothermic Reaction
The energy is absorbed from the surrounding environment in susch type of reaction. Energy is absorbed in the form of heat.
Exothermic ReactionThe energy is released from the reaction to its environment in this type of reaction. Energy is released as heat, electricity, light or sound.
Learn more about reaction here: https://brainly.com/question/26018275
Please answer this
The compound CO2(s) sublimes readily at 25°C. Which properties are usually associated with a compound that undergoes this kind of change?
1. High vapor pressure and high intermolecular attractions
2. High vapor pressure and low intermolecular attractions
3. Low vapor pressure and high intermolecular attractions
4. Low vapor pressure and low intermolecular attractions
2. Which was the independent variable in the experiment below? *
3 points
A. Amount of light
B. Soil type
C. Temperature
D. Health of plant
Answer:
I think it is C. Temperature, sorry if wrong.
What is the apparent brightness of a star?
How bright it actually is
How bright it is compared to the sun
How bright it is from Earth
How bright it is from a certain distance
Answer:
it's bright where you can see it it's not that bright compared to the sun from Earth it's really not so bright
The lithosphere (crust) is broken into sections called ____, which float on top of the asthenosphere.
Answer: Tetonic plates
Explanation: just because
When balanced, which equation would have the coefficient 3 in front of any of the reactants? zn hcl zncl2 h2 h2so4 b(oh)3 b2(so4)3 h2o fe agno3 fe(no3)2 ag c2h4o2 o2 co2 h2o
The balanced equation which have the coefficient 3 in front of any of the reactants is 3H₂SO₄ + 2B(OH)₃ → B₂(SO₄)₃ + 3H₂O.
What are balanced equation?Those chemical equations in which number of each atoms pesent in reactant side as well as on product side is always equal to each other.
Let us consider the balanced equations for the given chemical reactions are:
Zn + HCl → ZnCl₂ + H₂Balanced form of the above reaction will be written as Zn+2HCl → ZnCl₂+H₂ where all atoms are present in equal quantity.
H₂SO₄ + B(OH)₃ → B₂(SO₄)₃ + H₂OBalanced form of the given reaction will be written as 3H₂SO₄ + 2B(OH)₃ → B₂(SO₄)₃ + 3H₂O, where coefficient 3 is present in before sulphuric acid and water molecule.
Fe + AgNO₃ → Fe(NO₃)₂ + AgBalanced form of above reation will be written as Fe+ 2AgNO₃ → Fe(NO₃)₂ + 2Ag.
C₂H₄O₂ + O₂ → CO₂ + H₂OBalnced form of above chemical equation will be represented as C₂H₄O₂ + 2O₂ → 2CO₂ + 2H₂O, and coefficient 3 is not used any where.
The quation which have the coefficient 3 is 3H₂SO₄ + 2B(OH)₃ → B₂(SO₄)₃ + 3H₂O.
To know more about balancing equations, visit the below link:
https://brainly.com/question/26227625
Answer: It's 3. H2SO4 + B(OH)3 B2(SO4)3 + H2O
Which of these elements is the odd one out? Li Na Mg K Rb Cs
How much energy in Joules is required to convert 10 grams of ice at -10 °C to +10 °C water. s water = 4.18 joule/gram °C, sice = 2.09 joule/gram °C, Hfus 334joule/gram
Answer:
don't know just supporting u
the molar solubility of x2s in pure water us 0.0395
The Ksp shows the extent of dissolution of a solute in solution. The Ksp of the solution is 2.5 * 10^-4.
What is Ksp?The Ksp is an equilibrium constant that is usd to show the extent of solubility of a solute in solution.
The equation for the solution of X2S is;
X2S(s) ⇄2X^+(aq) + S^2-(aq)
Ksp = [2s]^2 [s]
Since s = 0.0395 M
Ksp = 4s^3
Ksp = 4[0.0395 ]^3
Ksp = 2.5 * 10^-4
Learn more about Ksp: https://brainly.com/question/27132799
how do you prepare saturated solution NaCl at 40°c?
sodium chloride procedure
Answer: Dissolve approximately 3 mg of Sodium Chloride in 2 mL of water.
Add 0.4 mL of silver nitrate TS and acidify with diluted nitric acid.
For the reaction below , label each reactant as an electron pair acceptor or electron pair donor and as a Lewis acid or a Lewis base. AlCl 3 +Cl^ -; AlCl 4 ^ -
Since the reaction shown in the question is an acid - base reaction in the Lewis sense; the Lewis acid here is AlCl3 while the Lewis base here is Cl^- .
What is a Lewis acid?A Lewis acid is a substance that accepts electron pair while a Lewis base donates an electron pair.
Now consider the given reaction; AlCl3 +Cl^- ------> AlCl 4 ^-. The Lewis acid here is AlCl3 while the Lewis base here is Cl^- .
Learn more about acid - base reaction: https://brainly.com/question/14356798
The pH of a solution prepared by dissolving 0. 350 mol of solid methylamine hydrochloride (CH3NH3Cl) in 1. 00 L of 1. 10 M methylamine (CH3NH2) is ________. The Kb for methylamine is 4. 40 ⋅ 10-4. (Assume the final volume is 1. 00 L. )
For the pH of a solution prepared by dissolving 0. 350 mol of solid methylamine hydrochloride, the pH is mathematically given as
pH = 11.14
What is the pH value of a solution prepared by dissolving 0. 350 mol ?Generally, the equation for the pKb is mathematically given as
pKb = -logKb
Therefore
pKb of CH3NH2 = -log(4.40×10-4)
pKb of CH3NH2= 3.36
Hence
pKa= 14 - pKb
pKa= 14 - 3.36
pKa= 10.64
In conclusion, using
pH = pKa + log([A-]/[HA])
pH = 10.64 + log(1.10M/0.350M)
pH = 11.14
Read more about pH value
https://brainly.com/question/1584537
The pictures show different organisms. Which characteristic do all organisms share?
A- All organisms are made of cells.
B- All organisms have cells with cell walls.
C- All organisms have cells with a nucleus.
D- All organisms can make their own food.
gIAnswer: It b
Explanation:
In what organelle or membrane are triacylglycerols synthesized and fatty acids elongated?.
1 - In what organelle or membrane are triacylglycerols synthesized and fatty acids elongated?
A - Lysosomes
B - Peroxisome
C - Endoplasmic reticulum
D - Ribosomes
E - Nucleus
The answer is Endoplasmic reticulum
Balancing _CH4+_CO2=_CCl4+_HCL
Explanation:
the equation is wrong, please make sure you typed it correctly. because there is no way methane and carbon dioxide can give carbon tetra chloride and hydrogen chloride gas. It's impossible, the reactants and products donot match. Re-write the equation correctly again
A chemist combines 300 mL of a 0.3 M Na2SO4 solution with 200 mL of 0.4 M BaCl2 solution. How many grams of precipitate form
The mass of the precipitate, BaSO₄ obtained from the given reaction is 18.64 grams
How to determine the mole Na₂SO₄Volume of Na₂SO₄ = 300 mL = 300 / 1000 = 0.3 LMolarity of Na₂SO₄ = 0.3 MMole of Na₂SO₄ =?Mole = Molarity x Volume
Mole of Na₂SO₄ = 0.3 × 0.3
Mole of Na₂SO₄ = 0.09 mole
How to determine the mole of BaCl₂Volume of BaCl₂ = 200 mL = 200 / 1000 = 0.2 LMolarity of BaCl₂ = 0.4 MMole of BaCl₂ =?Mole = Molarity x Volume
Mole of BaCl₂ = 0.4 × 0.2
Mole of BaCl₂ = 0.08 mole
How to determine the limiting reactantBalanced equation
Na₂SO₄(aq) + BaCl₂(aq) —> BaSO₄(s) + 2NaCl(aq)
From the balanced equation above,
1 mole of BaCl₂ reacted with 1 mole of Na₂SO₄.
Therefore,
0.08 mole of BaCl₂ will also react with 0.08 mole of Na₂SO₄.
From the above illustration, we can see that only 0.08 mole of Na₂SO₄ out of 0.09 mole given is neede to react completely with 0.08 mole of BaCl₂.
Therefore, BaCl₂ is the limiting reactant
How to determine the mass of the precipitate (BaSO₄) formedBalanced equation
Na₂SO₄(aq) + BaCl₂(aq) —> BaSO₄(s) + 2NaCl(aq)
From the balanced equation above,
1 mole of BaCl₂ reacted to produce 1 mole of BaSO₄.
Therefore,
0.08 mole of BaCl₂ will also react to produce 0.08 mole of BaSO₄.
The mass of BaSO₄ can be obtained as follow
Mole of BaSO₄ = 0.08 mole Molar mass of BaSO₄ = 137 + 32 + (16×4) = 233 g/mol Mass of BaSO₄ =?Mass = mole × molar mass
Mass of BaSO₄ = 0.08 × 233
Mass of BaSO₄ = 18.64 g
Learn more about stoichiometry:
https://brainly.com/question/14735801
Which statement best describes how deflating a soccer ball is evidence of matter?
The ball changes shape from round to flat.
The ball increases size and shape.
The mass of the ball has increased.
The temperature outside the ball has changed.
HELP PLS WILL MARK BRAINLIEST
07. 2
Explain why caesium is more reactive than sodium.
You should answer in terms of electrons.
The vertical columns on the periodic table are known as:.
Answer:
groups
Explanation:
In chemistry, the vertical columns are known as groups and the horizontal columns are known as periods.
Martin makes new cereal flavors for a major corporation. Which type of research tool would BEST help him to determine if people enjoy the new flavors?
Answer:
Surveys
Explanation:
Martin can make an interaction with people and take surveys to know whether people likes the new flavors.
What are surveys?Surveys are research techniques used to gather data from a designated group of respondents in order to learn more and acquire insights into a range of interesting topics. Depending on the methodology chosen and the objective of the study, they can be conducted in a variety of methods and serve a variety of objectives.
Direct questions to clients are the best approach to get information from them. Surveys are a good way to achieve it if you have a well-thought-out strategy.
Companies can use surveys to gather data to develop strategies and maintain the satisfaction of their employees and consumers while looking for solutions based on the results.
To find more on surveys, refer here:
https://brainly.com/question/29365625
#SPJ2
(9) Which is true from the following ?
(A) Size of A1+ < Size of Al (B) Size of A1+ > Size of Al
(C) Size of F < Size of F (D) Size of Nat = Size of Na
(10) For which element the highest shielding effect for outermost electron is observed ?
(A) Element of group 13 and period 2 (B) Element of group 13 and period 3
(C) Element of group 13 and period 4 (D) Element of group 13 and period 5
(11) Which one is the descending order of atomic radius of elements of third period.
Na(Z = 11), Mg (Z = 12), Al (Z = 13) and Si(Z = 14) ?
(A) Si > Al > Mg > Na (B) Na > Mg > Al > Si
(C) Na < Mg < Al < Si (D) Na > Al > Mg >Si
(12) Which order is true with reference to size of species ?
(A) Pb < Pb2+ < Pb++
(B) Pb4! > Pb2+ > Pb
(C) Pb > Pb2+ > Pb4+
(D) Pb2+ < Pb < Pb4+
Answer:
The correct answer is A and D.
Explanation:
Please I want brainliest.
Reason:
The size of the ions follows the order:
Negatively charged ion > Neutral atom >
Positively charged ion
This is because of the size of ions increases when the electrons are added to the outermost shell of an atom.
This happens due to the increase in
electron-electron repulsion.
Moreover, when the electrons are removed from an atom, then the affective nuclear charge that is experienced by the outermost electron increases.
Thus the size of the positively charged ion is least.
as star luminosity increases what else increases? (check all that apply)
a) carbon
b) temperature
c) size
d) nitrogen
Answer:
C
Explanation:
As the size of a star increases, luminosity increases. If you think about it, a larger star has more surface area. That increased surface area allows more light and energy to be given off.
What type of substance reacts with limestone (caco3) and produces carbon dioxide gas? a neutral substance a base an acid both an acid and a base
The type of substance which reacts with limestone and produces carbon dioxide gas is an acid.
What is limestone?Limestone is a basic compound with a molecular formula CaCO₃ and it reacts with acid to produce carbon dioxide gas.
Reaction between the limestone and an acid known as hydrochloric acid to produce carbon dioxide gas, water molecule and calcium chloride salt as:
CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O
Hence required substance is an acid.
To know about limestone, visit the below link:
https://brainly.com/question/13723417
Answer:
c on edge
<3 hope this helps people.
Ok take two tell me if u can see it or not it's #9
ANSWER DISCLAIMER; IF DISSATISFIED, REPORT THIS ANSWER AS SOON AS POSSIBLE:
*This may not be an option but this is most definently another way of saying the answer, through this, learning can be improved instead of giving the answer right off the bat.*Answer:
The motion of the gas particles is random and in a straight-line.
Explanation:
According to the kinetic hypothesis, a gas is made up of a huge number of submicroscopic particles (atoms or molecules) that are all in continual, random motion. The swiftly moving particles clash with one another and with the container's walls on a regular basis. The phrase ideal gas refers to a hypothetical gas made up of molecules that adhere to a few rules: The molecules of an ideal gas do neither attract or repel one another. The sole interaction between perfect gas molecules would be an elastic collision when they collided or an elastic collision with the container's walls.
A solution contains 5. 120 moles of Li2SO3 with a molarity of 6. 750 M. What is the volume of this solution
Answer: 0.759 L
Explanation:
molarity = moles of solute / liters of solution
so, 6.750 = 5.120 / liters of solution
liters of solution = 5.120/6.750 = 0.759 L