What is the best way to arrange the magnets on the train and on the track so that the model train levitates?

Answers

Answer 1

Answer:

See below

Explanation:

So the magnets poles are opposed and the magnets REPEL each other


Related Questions

In which substance will light move slowest?

Answers

Answer:

light travels slowest in diamond

Explanation:

The higher the index of refraction is, the slower the speed of light is. The indexes of refraction for diamond, air, and glass are, respectively, 2.42, 1.00, and approximately 1.50, depending upon the composition of the glass. Light travels slowest in diamonds.

Which would take more force to stop in 17. 3 seconds: a 3. 2 kg ball rolling in a straight line at a speed of 0. 3 m/sec or a 4. 1 kg ball rolling along the same path at a speed of 1. 2 m/sec?

Answers

The second one (4.1 kg ball)

This is because the mxv is greater than the other one.

For the 4.1kg ball, the force it’s moving on is 4.92N

As for the 3.2kg ball, it’s moving with a force of 0.9N. Much less than the other one.

A uniform cube with mass 0.500 kg and volume 0.0270 m3 is sitting on the floor. A uniform sphere with radius 0.400 m and mass 0.800 kg sits on top of the cube. How far is the center of mass of the two-object system above the floor

Answers

Answer:

44 1/3 cm

Explanation:

The cube has an edge length of ∛0.027 m = 0.3 m, so a center of mass (CoM) 15 cm above the floor.

The sphere's center of mass is 40 cm above the top of the cube, so is 70 cm above the floor. The weighted average of the CoM locations is ...

 ((15 cm)(0.700 kg) +(70 cm)(0.800 kg))/(0.700 kg +0.800 kg)

 = (10.5 kg·cm +56 kg·cm)/(1.500 kg) = 44.333... cm

The center of mass of the two-object system is 44 1/3 cm above the floor.

Energy is transferred in an electrical circuit through.

Answers

Answer:

Poynting field

Explanation:

magnetic field of currents named the Poynting field, chosen following in position or time the 19th of one hundred years English researcher John Poynting.

A star is observed to have a temperature of 3000 k and a luminosity of 105. what is the color of the star? what group does the star belong to?

Answers

AnsAnswerwer:

the first box is red and the second boybox is giant

Explanation:

Answer:

the first answer is red and the second answer is supergiant

Explanation:

i just did it on edge 22

What voltage source provides alternating current?

Answers

A good example of a voltage source, and the most commonly used, is a bettery. A voltage source is essential for any electrical circuit to function.

Answer:

an alternator or a generator      

Explanation:

batteries do NOT provide alternating current ...they provide DC

what do it mean by the value of gravitational constant is 6.67×10^-11Nm^2/kg^2

Answers

Answer:

gravitational constant value means it was never change in any particular area of the Earth

When astronauts aboard the space shuttle look down at the earth, its atmosphere appears blue. Why?.

Answers

Answer:

Reflection

Explanation:

The particles in the atmosphere only reflect the color blue and and all others are absorbed. Only the reflected colors can be seen from our eyes not the absorbed ones

In the first video for chapter 29, we looked at the emission spectrum of excited gases. In this video, we look at the __________ spectrum of colored filters

Answers

Although the video is not found here, the sentence makes reference to the transmission spectrum of colored filters.

What is the transmission spectrum?

The transmission spectrum indicates the light portion having a given wavelength that can be passed through a filter.

This spectrum (transmission spectrum) depends on the physical separation of the particles that form the filter.

In conclusion, although the video is not found here, the sentence makes reference to the transmission spectrum of colored filters.

Learn more about the transmission spectrum here:

https://brainly.com/question/1287536

#SPJ1

I know this ain't right but can someone please correct the mistakes I have it for a test​

Answers

Answer:

NICE HANDWRITING. I've done this before and I'm sure everything is correct. Although I would re-check to see if you had any mistakes with your calculations. Good job!

Explanation:

Describe the relationship between current, voltage difference and resistance in a circuit.

Answers

Answer:

see below

Explanation:

voltage = current * resistance

A mass on the end of a spring undergoes simple harmonic motion. At the instant when the mass is at its equilibrium position, what is its instantaneous velocity?.

Answers

Answer:

V = ω A sin ω t       can be used to describe SHM

When sin ω t = 1 (the maximum value possible)

V = ω A          at equilibrium sin ω t = 1

A car is driving at 18 m/s as it begins to merge onto a freeway. If it starts to accelerate at a constant rate of 5 m/s2, how long does it take the car to reach a speed of 47 m/s

Answers

Answer:

it will take 5.8seconds

Two particles A and B start simultaneously from a Point P with velocities 20 m/s and 30 m/s respectively. A and B move with acceleration equal in magnitude but opposite in direction. When A overtakes B at Q, its velocity is 30 m/s. The velocity of B at Q :

Answers

Answer:

20 m/s

Explanation:

Given

u(A) = 20 m/su(B) = 30 m/sacceleration equal in magnitude but opposite in direction

Solving

Velocity of A at Q = 30 m/sFrom, P to Q, Δv(A) = 30 - 20 = +10 m/sTherefore, velocity of B at Q will be decreased by 10 as it is equal in magnitude but opposite in direction to AΔv(B) = v(B at Q) - u(B at P)-10 m/s = v(B at Q) - 30 m/sv(B at Q) = 30 - 10 = 20 m/s

simple cell. Study it and answer the questions that follow ​

Answers

Explanation:

there is no picture or question attached

Why is it sometimes difficult for scientists to identify a a fold or fault?

Answers

Folds and faults are difficult to identify because they occur in the interior of rocks and also due to the dense nature of the materials.

What are faults and folds?

Faults are lines of weakness are present in materials dues to uneven positioning of the particles of the material.

Folds occurs when infolds occur in materials.

Faults and folds usually occur in rocks.

Folds and faults are difficult to identify because they occur internally and also due to the dense nature of the materials.

Learn more about faults and folds at: https://brainly.com/question/14240712

A crate is attracted toward the center of the earth by a gravitational force of 500 N. The force with which the earth is attracted toward the crate is:

Answers

Answer:

500 N    -    For every action there is an opposite and equal reaction.

Why do we think that ring particles must be replenished over time? where we think ring particles come from? choose the correct statement.

Answers

Answer:

Because collisions are constantly occurring within the ring systems, ring particles are continually being ground down to dust.

Explanation:

Hello people ~
The capacitance of a capacitor will decrease if we introduce a slab of:
(a) copper
(b) aluminium
(c) zinc
(d) None of these​

Answers

Answer:

Copper

Explanation:

Capacitance is directly proportional to dielectric constant

Aluminium and zinc are highly reactive and have high dielectric contact.

Copper has less dielectric constant hence capacitance will decrease

A tourist bus is carrying passengers from the bottom of a hill to the top. the people, the bus, and the luggage can be analyzed as a single . the total amount of energy in the system as the bus travels. this situation happens because some of the kinetic energy changes to energy because of friction between the tires and the road.

Answers

The  friction between the tires and the road causes loss of energy in the form of heat-energy.

What is kinetic energy?

The term kinetic energy refers to the energy of an object that is in motion. The pasengers that are sitting at a point possess potential energy. If the bus stops suddenly, the potential energy of the passengers is converted to kinetic energy as they move forward.

Since friction causes loss of energy, the  friction between the tires and the road causes looss of energy in the form of heat-energy.

Learn more about kinetic energy: https://brainly.com/question/12669551

#SPJ4

A circuit carries a current of 0.64 A when there is a resistance of 50.0 Ω. The voltage applied to the circuit, to the nearest whole number, is ___ V.

Answers

V = I • R

V = 32 volts

Answer:

32v

Explanation:

edge 2023

A bowling ball with a mass of 9kg is thrown down a lane with a constant speed of 3 m/s. The ball hits the 1.5kg pin, initially at rest, at the end of the lane. After the collision the pin moves with a speed of 5 m/s. How fast is the ball moving after the impact?​

Answers

Answer:

M1 V1 = M1 V2 + M2 V3    conservation of momentum

V2 = (M1 V1 - M2 V3) / M1      where V2 = speed of M1 after impact

V2 = (3 * 9 - 1.5 * 5) / 9  =   (27 - 7.5) / 9 = 2.17 m/s

Note: All speeds are in the same direction and have the same sign

The velocity of a free falling ball at different time intervals on unknown planet is shown in Figure 1.24.

Answer all of the following questions based on the image

A) What is the acceleration due to gravity of the planet?

B)What is the velocity at positions A and B?

C)What happens to the magnitude of velocity with passage of time? Why?

D)What factor(s) can influence the falling object on the Earth?

Answers

Answer:

a1 = (V2 - V1) / 1 s = 3.75 m/s^2

a2 = (V2 - V1) / (t2 - t1) = (7.5 - 3.75) / 1 s = 3.75 m/s^2

a3 = (V2 - V1) / (t2 - t1) = (7.5 - 3.75) / 1 s = 3.75 m/s^2

A) a = (a1 + a2 + a3) / 3 = 3.75 m/s^2

v = a (t2 - t1)

B) after    1 sec    v = 3.75 m / sec^2 * 1 sec = 3.75 m/s

    after   2 sec     v = v0 + a t = 3.75 m/s + 3.75 m/s^2 * 1 s = 7.5 m/s

C)  The velocity increases proportionaly to the time

D) One factor depends on the variation of the acceleration due to gravity because of different positions of measurement (on earth)

A much larger factor is due to air resisance of the air on the falling object

would a sphere shaped eraser bounce

Answers

Yes it would, I’ve tried it before

When a quality control test is performed to ensure that the penetrating ability of the x-ray beam is accurate, the result must be within what amount of the control panel setting

Answers

When a quality control test is performed to ensure that the penetrating ability of the x-ray beam is accurate, the result must be within what amount of the control panel setting will be ±4 kVp.

What is quality control?

Quality control entails testing units to see if they meet the standards for the final product.

The goal of the testing is to evaluate whether any corrective measures are required in the production process. Good quality control assists businesses in meeting customer needs for improved products.

When a quality control test is performed to ensure that the penetrating ability of the x-ray beam is accurate. The results must be under some limits.

Hence the result must be within what amount of the control panel setting will be ±4 kVp.

To learn more about the quality control refer to the link;

https://brainly.com/question/20892066

What is the power of a toaster if it can perform 3500 j of work In 3 minutes

Answers

Answer:

Around 20 watts, or 19.4W exactly

Explanation:

to calculate the power in a time frame you use
Joules/Time(Seconds) = W (your power)

So, we take 3500 joules / 3min (180sec)
3500/180 = 19.4W, if your question asks you to round up/down, round up to 20W of power! good luck!

If you drive an oscillator, it will have the largest amplitude if you drive it at its _______ frequency.

Answers

the answer is resonant frequency

0.030 m3.
The balloon is compressed at a constant temperature causing the volume
decrease to 0.025 m3.
No helium leaves the balloon.
Calculate the new pressure in the balloon

Answers

Answer:

see below

Explanation:

P1V1 = P2V2

100 000 (.03)  = x ( .025)     x = 120 000 pa

Your house is 45.0 m from a powerline carrying 152 A of current. How much magnetic field does the current create at your house?

?×10^? T

Answers

This question involves the concepts of th magnetic field and current.

The magnetic field created by the current at the house is "6.75 x 10⁻⁷ T".

Magnetic Field

The magnetic field created by a current carrying wire can be given by the following formula:

[tex]B=\frac{\mu_o I}{2\pi r}[/tex]

where,

B = magnetic field = ?[tex]\mu_o[/tex]= permeabiliy of free space =4π x 10⁻⁷I = current = 152 Ar = distance = 45 m

[tex]B=\frac{4\pi x\ 10^{-7}(152)}{2\pi(45)}[/tex]

B = 6.75 x 10⁻⁷ T

Learn more about magnetic field here:

https://brainly.com/question/23096032

#SPJ1

an air track car with a mass off 0.25 kg and velocity of 3.4 m/s to the right collides and couples with a 0.45 kg car moving to the left with a velocity of 3.9 m/s. what is the combined velocity of the cars just after the collision?

Answers

Answer:

Two objects are moving in opposite direction on a straight line. After collision, they stick together and move with common velocity

The total momentum of a colliding system is constant always. Therefore, by using this concept, the final velocity of the coupled mass will be 3.7 m/s.

What is momentum ?

Momentum of an object is the ability of an object to bring the force applied to make a maximum displacement. It is the product of its mass and velocity. Momentum is a vector quantity. It have both magnitude and direction.

The momentum in a collision is conserved. Thus total initial momentum is equal to the final momentum. Let m1 and m2 be the colliding masses and the u and v be the initial and final velocity.

Then, m1 u1 + m2u2 = (m1 + m2)v for a coupled mass after collision.

then final velocity v =  ( m1 u1 + m2u2 )/ (m1 + m2)

Apply the given values in the equation as follows:

v = (0.25 kg ×3.4m/s + 0.45 kg× 3.9 m/s)) (0.45 + 0.25) = 3.7 m/s

Therefore, the final velocity of the coupled masses after collision is  3.7 m/s.

Find more on momentum:

http://brainly.com/question/24030570

#SPJ2

Other Questions
Mitchel owns a livestock trailer that can hold a maximum of 5,000 pounds. The average weight of each goat is 90 pounds, and the average weight of each calf is 360 pounds. Mitchel would like to know how many goats and calves he can transport in a single trip.The inequality that represents this situation is graphed here.A. Mitchel can transport 42 goats and 2 calves in one trip.B. Mitchel can transport 30 goats and 8 calves in one trip.C. Mitchel can transport 24 goats and 10 calves in one trip.D. Mitchel can transport 50 goats and 4 calves in one trip. Which of the following best describes how Homestead Act land parcels were divided?A.) The Homestead Act divided land based on latitude and longitude.B.) The Homestead Act granted one section of land to each homesteader.C.) The Homestead Act gave each homesteader a quarter-section of land.D.) The Homestead Act left the division of land up to each township. What is the order of life in hierarchical order? What is at the center of a cell? Direction: Fill in the boxes with "Yes" or "No". KITE SQUARE RHOMBUS RECTANGLE P Property Opposite sides are equal. Opposite cid A gas at STP has a volume of 1.00 L. If the pressure is doubled and the temperature remains constant, what is the news of the gas? If you give them enough time, they will reveal their secret themselves. Which of the underlined words in the sentence is a possessive case pronoun? what is an ecosystem, habitat, niche, and please don't delete what is the meaning of liyf literally how do u spell it Allain explains, To make editing easier and the video more realistic, some people use a tripod for their camera to record the video. They then add fake shake to make it look like the camera was handheld.How could this excerpt be correctly rewritten using a semicolon?A) Allain explains; To make editing easier and the video more realistic, some people use a tripod for their camera to record the video. They then add fake shake to make it look like the camera was handheld.B) Allain explains, To make editing easier and the video more realistic; some people use a tripod for their camera to record the video. They then add fake shake to make it look like the camera was handheld.C) Allain explains, To make editing easier and the video more realistic, some people use a tripod for their camera to record the video; they then add fake shake to make it look like the camera was handheld.D) Allain explains, To make editing easier; and the video more realistic, some people use a tripod for their camera to record the video. They then add fake shake to make it look like the camera was handheld. Which of the following numbers is irrational?Select all that apply. An air bubble with a volume of 5.0 ml is released at the bottom of a lake where the pressure is 3.0 atm. when it reaches the surface, the bubble experiences a pressure of 1.0 atm. formula to use: p1v1 = p2v2 how will the volume of the air bubble change? fast pls The Fair Labor Standards Act does not cover which of the following?unemployment compensationchild laborminimum wageovertime pay the administrator in an Exchange Server needs to send digitally signed and encrypted messages. What should the administrator use frank rented a truck for one day. There was a base fee of 14.95, and there was an additional charge of 78 cents for each mile driven. Frank had to pay $134.29 when he returned the truck. For how many miles did he drive the truck The amount of potassium excreted by the kidneys is regulated mainly by. How do you write $2.67 in fraction form? Farmers could harvest grain much more quickly with the mechanical reaper than theycould by hand. true or false? In a large batch of chocolates, the probability of choosing one with both nuts and raisins is 0.3.1f 40% overall have nuts, what is the probability that a chocolate withnuts will also have raisins? HELP MY BRAIN HURTSSSS(WILL GIVE BRaiNLieST)