What is the freezing point of the solution after you add an additional 1. 34 g (Use i = 2. 5 for MgCl2)

Answers

Answer 1

The freezing point of the solution after you add an additional 1.34 g is -0.808°C.

What is freezing point of a solution?

A solution's freezing point is lower than the pure solvent's freezing point. This means that for freezing to happen, a solution needs to be cooled to a lower temperature than the pure solvent.

We use the equation: to determine the mass of the solution

Density = mass/volume

1.05 g/ml = mass/ 50ml

mass = 1.05×50

mass = 52.5g.

Percentage of magnesium chloride in the solution is 1.52%

Mass of magnesium chloride in the solution = 1.52 % of 52.5 g

Mass of magnesium chloride in the solution = 1.52/100×52.5

Mass of magnesium chloride in the solution = 0.798g

The following equation is used to determine depression in freezing point:

ΔTf = Freezing point of pure solution - Freezing point of solution

ΔTf = i Kf m

Freezing point of pure solution - Freezing point of solution = i Kf m

m =  m solute × 100/M solute × W solvent

Given values,

Freezing point of pure solution (water) is 0°C

i is Vant hoff factor = 2.5

Kf molal freezing point elevation constant = 1.86°C/m

m solute given mass of solute (magnesium chloride) = [0.798 + 1.34] g

m solute = 2.138 g

M solute molar mass of solute (magnesium chloride) = 95.2 g/mol

W solvent mass of solvent (water) = [52.5 - 0.798] g = 51.702 g

substitute the given values,

0 - Freezing point of solution = 1×1.86×2.138×1000/95.2×51.702

Freezing point of solution = -0.808°C.

To know more about freezing point visit:

https://brainly.com/question/14825265

#SPJ4

Complete question is " A 50 mL solution is initially 1.52% MgCl₂ by mass and has a density of 1.05 g/ml

What is the freezing point of the solution after you add an additional 1.34 g MgCl₂? (Use i = 2.5 for MgCl₂)."


Related Questions

. The reaction rates of many spontaneous reactions are actually very slow. Which of these statements is the best explanation for this observation? (1) The activation energy of the reaction is large. (2) AG for the reaction is positive. (3) Such reactions are endothermic. (4) The entropy change is negative.

Answers

In reality, spontaneous reactions occur relatively slowly because The reaction's activation energy is high.

Hence, Option 1 is correct.

A spontaneous reaction is one that favors the creation of products in the environment in which it is taking place.Given that spontaneous reactions discharge free energy, the sign of G must be negative. There are four distinct conceivable combinations because both H and S can be either positive or negative depending on the features of the specific reaction.An exothermic example of a spontaneous reaction is a raging campfire (there is a decrease in the energy of the system as energy is released to the surroundings as heat).

Find more information about Activation energy here:

brainly.com/question/1380484

#SPJ4

How many ATP does ATP produce?

Answers

The bulk of ATP production occurs during cellular respiration within the mitochondrial matrix, producing around thirty-two ATP molecules for every molecule of oxidized glucose.

What is ATP?

The energy currency of the cell is ATP (adenosine triphosphate). It is a natural chemical molecule made up of phosphate groups, adenine, and the sugar ribose. These molecules supply energy to the body's many metabolic operations. Therefore, it is dubbed "Energy Currency of the Cell". ATP can be utilized to store energy for future reactions or it can be used to pay for reactions when the cell need energy. Animals use ATP to store the energy received from food breakdown. Similarly, plants use ATP molecules to collect and store the energy they receive from light during photosynthesis.

Here,

The majority of ATP is produced during cellular respiration within the mitochondrial matrix, which produces around thirty-two ATP molecules for every molecule of oxidized glucose.

To know more about ATP,

https://brainly.com/question/14637256

#SPJ4

in an experiment a piece of magnesium ribbon was cleaned with steel wool 2.4g of the clean ribbon was placed in a crucible and completely... In an experiment a piece of magnesium ribbon was cleaned with steel wool 2.4g of the clean ribbon was placed in a crucible and completely burnt in oxygen.after cooling the product weighted 4.0g. (a)explain why it was necessary to clean the magnesium ribbon? (b)what observation was made in the crucible after burning? (c)why was there an increase in mass? (d)write the equation for reaction which took place in the crucible? (e)the product in the crucible was shaken with water and filtered.​

Answers

(a) It was necessary to clean the magnesium ribbon in order to remove any impurities or contaminants that might be present on the surface of the ribbon. These impurities could interfere with the burning process or alter the final products of the reaction.

(b) After burning, it is likely that an ash or residue was observed in the crucible.

(c) The increase in mass may be due to the production of new products during the burning process. These products may include magnesium oxide, which is a white solid, or other compounds formed through the reaction of magnesium with oxygen.

(d) The equation for the reaction that took place in the crucible is:

2Mg + O2 -> 2MgO

(e) When the product in the crucible is shaken with water, it is likely that any soluble products, such as magnesium hydroxide, will dissolve in the water. The remaining solid material can then be filtered out, leaving a solution containing the dissolved products.

Final answer:

The magnesium ribbon was cleaned to remove any impurities that could affect the reaction. After burning magnesium in oxygen, the resulting product is magnesium oxide, and the mass increases because the magnesium combines with the oxygen. The reaction equation is 2Mg + O2 -> 2MgO.

Explanation:

(a) It was necessary to clean the magnesium ribbon with steel wool to remove any surface oxidation or impurities that could affect the reaction.
(b) After burning, an observation that could be made in the crucible would be a white ash-like substance, which is magnesium oxide.
(c) There was an increase in mass because when magnesium reacts with oxygen, it gains mass as it combines with the oxygen to form magnesium oxide.
(d) The equation for the reaction is: 2Mg + O2 -> 2MgO
(e) When the product in the crucible was shaken with water and filtered, this procedure would typically be used to isolate the product from any remaining unreacted magnesium or other reaction by-products.

Learn more about Chemistry of Magnesium here:

https://brainly.com/question/31503589

#SPJ2

Which represents the greatest mass?
• all the same
• 1.0 mol P
• 1.0 mol I
• 1.0 mol K
• 1.0 mol Al​

Answers

Answer:

it is 1 mole of I is correct

Why and how does atom change during time​

Answers

Adding or removing protons from the nucleus changes the charge of the nucleus and changes that atom's atomic number. So, adding or removing protons from the nucleus changes what element that atom is

The statement "atoms have a small, dense nucleus" is true. What evidence do scientists use to prove this statement as true?


Most alpha particles shot at gold foil go straight through, without any changes in their direction.


The particles ejected in Thomson's experiment bent away from the negatively charged plates, but toward positively charged plates.


A few alpha particles shot at gold foil bounce in the opposite direction


No matter which element Thomson put in a cathode ray tube, the smae negative particles wit the same properties (such as charge and mass) were ejectected.

Answers

In the gold foil experiment, alpha particles shot at gold foil bounced in the opposite direction from a gold foil which indicated atoms have a small, dense nucleus.

What is the gold foil experiment?

Rutherford’s α-particle scattering or gold foil experiment changed our perception of the atomic structure of an atom. Rutherford bombarded beams of α-particles at thin gold foil and observed how the α-particles scattered from the gold foil.

Rutherford showed that the atom has the most empty space with the nucleus at the center and electrons rotating around the atomic nucleus. Highly charged α-particles passed straight undeflected through the foil. This will be the expected result if the plum pudding model of Thomson was correct.

A few charged alpha particles were deflected backward direction leading to the positive charge concentrated in a small space.

Learn more about the gold foil experiment, here:

brainly.com/question/4593249

#SPJ1

A baketball ha a momentum of 6. 0 kg m/ outh and a ma of 0. 15 kg what i the baketball velocity

Answers

The basketball velocity is 40 m/s.

What is velocity?

A vector quantity with both size and direction is velocity. In respect to time, it is the rate with which a displacement changes. Using the formula velocity = displacement/time, velocity may be computed. It is a way to gauge how quickly something is moving in a certain direction. Acceleration, or the rate at which an object's velocity changes, is closely related with velocity. Being a vector quantity, velocity has both a direction and a magnitude. An object must move at the a constant speed and in the same direction in order to maintain a constant velocity.

To learn more about velocity
https://brainly.com/question/29215982
#SPJ4

What happens to the reactivity as you move from left to right?

Answers

The reactivity of the element in the periodic table as me move from the left to right in the period it will decreases first and then it will increases.

In the periodic table , for the metals the reactivity of the decreases as we move across the period from left to the right. in the group it will increases as we move from the top to bottom.

In the periodic table for the non metals, the reactivity will increases as we move from left to the right in a period. in the group it will decreases as we move from top to the bottom.

To learn more about reactivity here

https://brainly.com/question/29788210

#SPJ4

What are the factors affecting the state of a substance?

Answers

There are three main factors that affect the state of a substance: temperature, pressure, and the amount of substance.

Temperature: Temperature is a measure of the average kinetic energy of particles within a substance. As the temperature of matter increases, particles have more kinetic energy and move faster. This can change the state of matter from solid to liquid or from liquid to gas.

Pressure: Pressure is the force exerted on a substance per unit area. Applying pressure to a substance can change its state from gas to liquid or from liquid to solid.

Amount of Matter: The amount of matter in the system also affects its state. As the amount of matter in the system increases, the particles become more dense and the matter can change state from gas to liquid or liquid to solid.

Taken together, temperature, pressure and amount of matter are the three main factors that affect the state of matter. These factors can change the state of matter from solid to liquid, liquid to gas, or gas to solid.

Learn more about factors affecting the state of a substance here: https://brainly.com/question/1201207

#SPJ4

The movement of tectonic plates is so slow and gradual that you cannot see or feel them moving. As a result, scientist depend on the global positioning system (GPS) to verify tectonic plate motion. Satellites can measure the small distances that GPS ground stations move over time. In what units is the movement of tectonic plates measured? Group of answer choices.

Answers

Answer:

centimeters per year

Explanation:

6.0 mol Al reacts with 4.0 mol O2 to form Al2O3.
4A1+30₂ → 2Al₂O3
How many moles of Al2O3 form when 4.0 mol Al reacts?

Answers

2 moles of Al₂O₃ will be produced when 4 moles of Al reacts in accordance with the above equation.

How to calculate moles using stoichiometry?

Stoichiometry refers to the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, 6.0 moles of Al reacts with 4.0 mol of oxygen gas to form Al₂O₃ as follows:

4Al + 30₂ → 2Al₂O₃

Based on the above equation, 4 moles of Al reacts to form 2 moles of aluminium oxide.

This means that 4 moles of aluminium will produce 4 × ²/4 = 2 moles of aluminium oxide.

Therefore, 2 moles of Al₂O₃ will be produced by 4 moles of aluminium.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

. What are two major organs of the excretory system?

Answers

Answer:

Kidney and bladder..............

Answer:

Option B

The answer is Kidneys and Bladder

Explanation:

The Excretory Organs

A pair of KidneyA pair of Uterus A Urinary BladderA Urethra

But, Kidneys and Bladder is the major organ in Excretory System

Thus, The answer is Kidneys and Bladder

-TheUnknownScientist

which of the following molecules has the most polar bond between the bonded atoms in terms of greatest and hf hcl hbr hl

Answers

HCl is the most polar due to the high electronegativity of Cl.

Hydrogen chloride is a diatomic molecule, composed of a hydrogen atom, H, and a chlorine atom, Cl, joined by a polar covalent bond. The bond is a polar covalent bond because the chlorine atom is much more electronegative than the hydrogen atom.

Positively charged protons in the nucleus attract negatively charged electrons. As the number of protons in the nucleus increases, the electronegativity, or attractive force, increases. Therefore, electronegativity increases in a row from left to right on the periodic table.

Learn more about electronegativity visit:

brainly.com/question/17762711

#SPJ4

If 2.65 mol of O2 gas has a volume of 49.0 L at 180 C, what is the pressure of the gas?

Answers

Answer:

2.01atm

Explanation:

On a camping trip, Marta roasts a marshmallow in the campfire. The marshmallow grows, and then turns black.
Marta notices that the roasted marshmallow smells and tastes differently than the uncooked marshmallows. What
change has taken place, and how does Marta know?
A
a chemical change because the marshmallow changed in taste, color and smell
B
no change because the marshmallow is not a new substance
с
only a physical change because the marshmallow changed size
D
a chemical change because the marshmallow only changed in pH level

Answers

Answer:

the answers for the quiz are;

1: A. appearance, composition

2: C. they link up in different ways

3: A. Shape

4: B. false

5: C. a chunky solid formed from two liquids combining

6: B. honey dissolving in tea

7: C. a red candy dissolves and turns water pink

8: liquid water becoming steam

9: D. A substance has changed chemically

10: A. a chemical change because the marshmallow changed in taste, color and smell

Explanation:

On the roasting of marshmallows, a chemical change takes place which changed their taste, color, and smell. Therefore, option (A) is correct.

What is the chemical change?

A chemical change is a type of change in which the molecular composition is altered and a new substance is formed is known as a chemical change.

The changes are irreversible and permanent in chemical change. The mass of the substance is altered by adding or removing it during a chemical change.

During a chemical change, there is an energy difference in the breaking of old bonds and the formation of new bonds.

When marshmallows are roasted, a chemical change takes place. The heat causes a chemical reaction producing water molecules, which evaporate and leave carbon behind.

The marshmallow swells as the moisture inside expands, which causes the marshmallow to swell. when the moisture expands, it forms tiny holes in the marshmallow, which offer the moisture to escape as steam.

Then, the carbon present in sugar burns with the oxygen in the air. The blackened part of the marshmallow is the roasted carbon which changes the marshmallow's color.

Learn more about chemical change, here:

https://brainly.com/question/23693316

#SPJ5

A compound is found to contain 43.64 % phosphorus and 56.36 % oxygen by weight The molecular weight for this compound is 283.88 g/mol. What is the molecular formula for this compound

Answers

A compound is found to contain 43.64 % phosphorus and 56.36 % oxygen by weight The molecular weight for this compound is 283.88 g/mol. is the molecular formula for this compound is P₂O₅.

Given that :

mass of the oxygen = 56.36 %

molar mass of the oxygen = 16 g /mol

moles of the oxygen= mass / molar mass

                                          = 56.36 / 16

                                          = 3.52 mol

mass of the phosphorus = 43.64 %

molar mass of the phosphorus = 31 g/mol

moles of the phosphorus = 43.64 / 31

                                         = 1.41 mol

dividing by the smallest one :

moles of the phosphorus = 1 = 2

moles of the oxygen = 2.5 = 5

The molecular formula is P₂O₅.

To learn more about molecular formula here

https://brainly.com/question/9529491

#SPJ4

Biological approaches to treating psychological disorders presume that
(1 Point)

A.the body and the mind are not related.

B.psychotherapy is completely ineffective.

C.there is an underlying physiological reason for disturbed behavior.

D.psychological disorders can never be completely cured.

Answers

The answer is a I hope this helped

a chloride of rhenium contains 63.6% rhenium. what is the formula of this compound?

Answers

A chloride of rhenium contains 63.6% rhenium.  the formula of this compound  is Re2Cl3.

The chemical trirhenium nonachloride has the formula ReCl3, which is occasionally also written as Re3Cl9. It is a hygroscopic solid that is dark red in color and insoluble in common solvents. The substance is significant in the development of inorganic chemistry since it was the first cluster compound to have metal-metal links. [1] It serves as the raw ingredient for the production of various rhenium complexes. Rhenium is an atomic number 75 chemical element with the symbol Re. It is a heavy, third-row transition metal in group 7 of the periodic table that is silvery-gray in color. Rhenium is one of the rarest elements in the Earth's crust, with an estimated average concentration of 1 part per billion (ppb).

learn more about Rhenium Refer:brainly.com/question/13294446

#SPJ4

calculate the solubility of AgCN in a solution containing 1.0M H Ksp of AgCN is 2.2e-12 Ka of HCN is 6.2e-10

Answers

The solubility of AgCN in a solution containing 1.0M H Ksp of AgCN is 2.2e-12 Ka of HCN is 6.2e-10 is 5.9 x 10^-2M.

Given concentration of H+ (M) = 1.0M

Ksp of AgCN = 2.2e-12

Ka  of HCN = 6.2e-10

AgCN ⇋ Ag+ +CN− ................Ksp

CN − + H+ ⇋ HCN................... 1/Ka​

AgCN + H+ ⇋ HCN + Ag+ ...................Ksp/Ka = K0

K0 = 2.2e-12/6.2e-10 = 0.0035 = 35 x 10-4

At Equilibrium:   AgCN + H+ ⇋ HCN + Ag+

Let the moles of [Ag+] = x

So the number of moles of [HCN] = x

K0 = [Ag+] [HCN] / [H+]

35 x 10-4 = x^2/1

x = 5.9 x 10^-2M

Hence the molar solubility of AgCN in buffer solution is 5.9 x 10^-2M.

To learn more about solubility click here https://brainly.com/question/28170449

#SPJ4

What are the 7 are elements?

Answers

The classical elements or seven elements in nature are plants, warm energy, soil, mineral, water, cold energy, and air.

Living organisms incorporate distinctly massive quantities of oxygen, carbon, hydrogen, nitrogen, and sulfur (those 5 factors are called the majority factors), together with sodium, magnesium, potassium, calcium, chlorine, and phosphorus (those six factors are called microminerals). From the smallest atom to a massive whale to the sun machine itself, all matters are stated to be composed of a few aggregate of those elements. Halogens belong to group 17, and they acquire only one electron in order to attain stable electronic configuration.

To learn more about elements check the link below:

https://brainly.com/question/28376204

#SPJ4

Diatomic elements are important. what makes them different from other elemental substances?

Answers

Diatomic elements are elements that exist as two atoms bound together, usually in the form of a molecule.

What is Diatomic?

Diatomic molecules are molecules composed of two atoms, held together by chemical bonds. They are the simplest type of molecule, and are very common in nature. Examples of diatomic molecules include oxygen (O2), nitrogen (N2), hydrogen (H2), chlorine (Cl2), and iodine (I2). Diatomic molecules have a wide range of applications in various industries, such as medicine, chemistry, engineering, and energy.

This differs from other elemental substances because those substances contain only one atom. Diatomic elements are very common in nature and make up a large percentage of the atmosphere. They also have unique properties because of the two atoms being bound together. Diatomic elements are an important part of many everyday processes, from respiration to combustion to corrosion.

To learn more about Diatomic
https://brainly.com/question/1611262
#SPJ4

What is the variable in an experiment?
A the glass tubes you use
B the questions you ask
C the thing you want to test
D the part that stays the same

Answers

im not sure but i think the answer is C

Which of the following properties of covalent compounds are influenced by ionic character?
a. melting point
b. boiling point
c. viscosity
d. all of the above

Answers

The property of the covalent compound that is influenced by ionic character is boiling point. Option B

What is the ionic character?

We know that for compounds, the kind of bonds that they have are usually neither here nor there. The bonds would have an ionic character and also a given amount of the covalent character.

We must note that the ionic character of a bond is very important when we discuss intermolecular interactions and they do affect the boiling points of the substances very much.

Learn more about boiling point:https://brainly.com/question/2153588

#SPJ1

The poles of an electromagnet can even be reversed by reversing the flow of electricity true or false

Answers

By reversing the flow of electricity, the poles of an electromagnet may be reversed. As a result, the following statement is true.

An electromagnet is a magnet that uses electricity to operate. In contrast to a permanent magnet, the strength of an electromagnet may be readily altered by varying the amount of electric current flowing through it. By reversing the flow of electricity, the poles of an electromagnet can even be reversed.

An electromagnet is created when an electric current produces a magnetic field. The resulting magnetic field surrounds the original electric current, forming circles
When an electric current is passed through a wire, the magnetic field created can be concentrated within certain areas. This effect can be further strengthened by wrapping the wire around a stable core. Certain materials, such as ironnickel and cobalt, have atoms that act like tiny magnets. 
As the current flows around the core, increasing in intensity until all of the atoms are aligned, the magnetic field becomes stronger. At some point, however, this will happen and further increases in electric current will not affect the magnetization.

Know more about electromagnet here:

https://brainly.com/question/12555869

How many molecules are in 10.0 g of aspartame?

Answers

There are 0.034 x 1019 = 10¹⁹ moles of molecules in 10 g of aspartame.

Avogadro's constant, 6.022 1023, and the molar mass of the material are used to calculate the number of molecules in a given mass of the substance. Aspartame's molecular formula is C14H18N2O5.

Aspartame has a molecular mass of 294 (12 * 14 + 1 * 18 + 14 * 2) + 16 * 5)

Let's convert the 10 mg mass supplied to aspartame moles as follows:

Amount of moles =

= 0.034 × 10 ⁻⁵ mole

We may convert this number to molecules using Avogadro's constant as follows:

= 0.034 × 10 ⁻⁵ (6.022 × 10²³)

= 0.034 × 10¹⁹

To learn more about molecules please click on below link

https://brainly.com/question/19922822

#SPJ4

The following reaction shows the products when sulfuric acid and aluminum hydroxide react.


2Al(OH)3 + 3H2SO4 → Al2(SO4)3 + 6H2O


The table shows the calculated amounts of reactants and products when the reaction was conducted in a laboratory.


What is the approximate amount of the leftover reactant?

11. 73 g of sulfuric acid

10. 33 g of sulfuric acid

11. 12 g of aluminum hydroxide

13. 67 g of aluminum hydroxide

Answers

The remaining reactant (Aluminum Hydroxide) weighs approximately 11.73 g.

Hence, Option A is correct.

Al(OH)3 has a molar mass of 78 g.H2SO4 has a molar mass of 98 g.Given:Al(OH)3 mass = 30gH2SO4 mass = 35gAl number of moles (OH)3 = 30/78 =0.385H2SO4 mole number = 35/98 = 0.357The provided reaction states that 2Al(OH)3 + 3H2SO4 Al2 (SO4)3 + 6H2OAl, 2 moles (OH)H2SO4 is equal to 3 moles.Al 1 moles (OH)H2SO4 is equal to 3/2 moles.Al 0.385 moles (OH)0.578 moles of H2SO4 are equal to 3 = (3/2) x 0.385 moles of H2SO4.But the amount of H2SO4 is only 0.357 moles.H2SO4 is the limiting reagent as a result.Al(OH)3 is produced when 0.357 moles of H2SO4 react with = 2/3 x 0.357 moles of Al(OH)3.Al(OH)3 leftovers are therefore 0.147 moles (0.385 - 0.238 moles).Al(OH)3 has a molecular weight of 78 g, hence 78 x 0.147 g is one mole.= 11.43 g11.73 g of Al(OH)3 will be left behind as a result.

To know more about limiting reagent here

https://brainly.com/question/14222359

#SPJ4

convert formic acid into methane​

Answers

Catalytic conversion of formic acid into methanol was investigated with Cu as a catalyst and Al as a reductant under hydrothermal conditions. It was found that formic acid can be converted into methanol by such means. The highest yield of methanol (30.4%) was attained with a temperature of 300 °C and a reaction time of 9 h. Hope this helped!

When stomach acid helps to break down food into smaller particles this is
an example of a change.*
O Physical
Chemical
O
Elemental
о
Atomic

Answers

Answer:

chemical, is the answer your looking for

Identify the Lewis acid in the following reaction: Pt2+(aq) + 4NH3 (aq) ? Pt(NH3)4,2+(aq)
a) Pt2+
b) NH3
c) Pt(NH3)4,2+

Answers

The Lewis acid in the following reaction: Pt2+(aq) + 4NH3 (aq) ?Pt(NH3)4,2+(aq) is : a) Pt2+.

What do you understand by a Lewis acid?

Platinum ion (Pt2+) ( P t 2 + ) is a Lewis acid in the given reaction because it accepts pair of electron from ammonia.

A Lewis acid is any substance, such as H+ ion, that can accept a pair of nonbonding electrons. In other words, Lewis acid is an electron-pair acceptor. Lewis acid is chemical species that has an empty orbital which is capable of accepting electron pair from Lewis base to form a Lewis adduct.

To know more about Lewis acid, refer

https://brainly.com/question/12326649

#SPJ4


In the reaction

2 NO(g) + O2(g) → 2 NO2(g)
when the NO concentration alone was doubled, the rate increased by a factor of 4; when both the NO and O2 concentrations were in-
creased by a factor of 2, the rate increased by a factor of 8. What is the rate law for the reaction?

Answers

Answer:

rate = [NO]²[O2]

Explanation:

The rate law for the reaction:

2 NO(g) + O2(g) → 2 NO2(g)

Is expressed in terms of reactants as follows:

rate = [NO]ⁿ[O2]ˣ

Where n and x are the coefficients of the rate law.

If [NO] is doubled, the rate increased 4 times. That is only possible if:

rate = [NO]²[O2]ˣ

Now, as [NO] is doubled and increased the rate 4 times, and [NO] + [O2] when doubled increased the rate 8 times, doubled [O2] implies increased the rate 2 times. That is only possible is:

rate = [NO]²[O2]
Other Questions
The students at Walden Middle School are selling tins of popcorn to raise money for new uniforms. They sold 42 tins in the first week.How much money did they make in the first week? What is 4 5/7 + 4 1/4 Jenna noted the prices for a bag of dog food at a number of online stores. The prices were $22, $9, $10, $19, $18, and $20.Find the mean, median, and mode of the prices.Which measure of center BEST describes this set of data. Explain your choice. Pleeeeeasssssee heeelp asap The image is attachedThe box lists some characteristics of a plant that has adapted to conditions in Its environment. Grows in clusters and low to the ground Able to grow under a layer of snow Carries out photosynthesis at temperatures below freezing Flowers very quickly and briefly during Summer Produces small, moisture-retaining leaves To which type of environment is the plant best adapted? A. Desert Grassland Rainforest D. (ID TundraNo links i will report if you have written an argumentative essay on why people contribute to climate change, please help me. i am have no idea what to write about and how to format it Help plis and thankyou :) take 100 POINTS!!!! look the picture ASAP HELPWhich group(s) is (are) affected by fashion forecasts?A: yarn manufacturersB: fashion brand managersC: school principals 20 PTS-what Theorem can be used to prove these triangles are congruent In what way can those who participate in the Church's liturgies be said to be participants in the heavenly liturgy What may be a concern if you have an adjustable rate mortgage ? HELPPPPPP!!!! ASAPPPPPP!!!! Assess the accuracy of the following statement: Early trade between civilizations was peaceful. True, man has always been on the lookout for bargain False, man has always wanted to seek a better deal which led to warring and conflict. False, man has never been able to get along with his neighbors. True, trade generates income and fulfills needs of both parties Plssssss help meeewee Find the weight W needed to hold the wall shown in Fig. P2.76 upright. The wall is 10 m wide. Sammies room is 20 feet long and 12 feet wide her parents want to cover the floor with tiles. If they choose to use tiles with with side 2 feet long how many tile would they need his mapping shows a functional relationship. A mapping diagram shows a relation, using arrows, between domain and range for the following ordered pairs: (2, 4), (negative 3, 0), (negative 1, negative 1), (4, 3). When f(x)=4, what is the value of x? 0 2 3 4 Which of the following are numbers and text that do not change unless manually altered?equal signreferencesconstantsmathematical operators help please i really need help ^^^ above. Please dont send a link do somewhere random. Thank you, preferably just answer here. Interruptions in the supply of goods and services in a supply chain caused by an internal or external event that disrupts supply chain operations, causing potential reductions in service levels, product quality, and sales are referred to as: