Answer:
350 j
Explanation:
K.E. = 1/2 m v^2
= 1/2 7 * 10 ^2 = 350 j
How are liquids and gases alike?
Answer:
The particles of both states are free flowing and they fill the container that they are in.
Explanation:
Liquids and gases do not have a set formation like a solid does. Liquids have more range of motion and will fill a container (such as how water will fill a glass). Gas has an even wider range of motion and move around very quickly.
Iron has a density of 7.9 g/cm 3. What is the mass of a cube of iron with the length of one side equal to 55.0 mm
Answer:
1314362.5 gm or 1314.3625 kg
Explanation:
A cube has all three dimension =
55 * 55 * 55 = 166375 cm^3
166 375 * 7.9 g/ cm^3 = 1314362.5 gm
Sodium-24 has a half-life of 15 hours. after 45 hours, how much sodium-24 will remain of an original 50.0-g sample? 5.56 g 6.25 g 16.7 g 25.0 g
Answer:
6.25 gm
Explanation:
1 /2 * 1/2 * 1/2 = 1/8th of the original
50/8 = 6.25 gm
Answer:
its b
Explanation:
trust
An asteroid falls from the sky and exerts 882 N of force on Earth's ground. How much force does it exert on Mars if the gravity on mar is 3.7m/s??
Answer:
333N
Explanation:
=>First you have to find the mass of the asteroid.
so 882N÷9.8m/s²=90Kg
then,multiply it by Mars's gravity
=>90Kg*3.7m/s²=333N
A 100kg man wants to burn off 500 kilocalories by running up ar elliptical. How far will he have to climb?
The distance the 100kg man must climb to burn off 500 kilocalories by running up an elliptical path is 2,136.1 m.
Potential energy of the man
The potential energy of the man from a known height can be used to deternine the distance the man would have to climb.
P.E = mgh
Where;
P.E is potential energy, given as 500 kilocalories,
1 kcal = 4186.8 joules
500 kcal = 2,093,400 J
Distance traveled by the manh = P.E/mg
h = (2,093,400) / (100 x 9.8)
h = 2,136.1 m
Learn more about potential energy here: https://brainly.com/question/1242059
The following are secondary sources of energy except a.coal b crude oil c nuclear d wind e wood
Answer:
d) Wind
Explanation:
Secondary energy is energy produced by converting energy available in its natural state in the environment. Hence Wind is a primary source not a secondary source
When carbon dioxide is in ocean water it bonds to carbonate, preventing its use by(1 point) coral reefs and shellfish. coral reefs and shellfish. whales and shellfish. whales and shellfish. coral reefs and currents. coral reefs and currents. whales and currents.
When carbon dioxide is in ocean water it bonds to carbonate, preventing its use by coral reefs and currents.
How is carbon dioxide used in the ocean?Carbon dioxide (CO2) is made use of by aquatic photosynthetic organisms to make their own food.
Some examples of aquatic organisms that makes use of carbon dioxide are:
coral reefsalgaeaquatic plantsHowever, when carbon dioxide is in ocean water it bonds to carbonate, preventing its use by coral reefs and currents.
Learn more about carbon dioxide at: https://brainly.com/question/3049557
Answer:
coral reefs and shellfish
Explanation:
Both need carbonate
Immediately after it has started to rain, dust particles and oil residue float on the water and ____________ the traction of tires.
When it rains, dust particles and oil residues float on the water and this reduces the traction of tires.
What is traction?This concept refers to a force between the tires and road that causes the movement of the wheels or vehicle is slower.
What happens with traction when it rains?It is well-known more accidents occur when it rains, which is caused by cars slidding on the road. This is because when it rains traction or the grip of the wheel drastically reduces.
Learn more about traction in: https://brainly.com/question/14525337
ball and bowl system
Answer:
Once the ball is place at the position A and then released, It will accelerate towards the mean position under its weight. At the mean piston it again maximum velocity and momentum so its moves up-to the position B due to inertia. At B it has zero velocity so zero kinetic energy but maximum potential energy.
Again from point B it will move towards O under the restoring Force having maximum velocity at O but does not stop at O due to inertia and will go up to A. In this way the ball will continue to oscillate between the points A and B about the point O, it has simple harmonic motion.
Explanation:
(15 points) How many circles do i draw, like in what order
Answer:
U have to draw 3 circles
take a specific point and draw 3 circles of different size from the same point.
Water is flowing through a pipe with a velocity of 5 m/s. The pipe has a diameter of 6 cm. The pipe then goes up 3 meters and narrows to a diameter of 4 cm. If the gauge pressure in the lower part of the pipe is 80 kPa, what is the gauge pressure in the higher and more narrow part of the pipe
The gauge pressure in the higher part will be 136 kph. The pressure is found with the help of the Bernoulli equation.
What is gauge pressure?The difference between absolute pressure and atmospheric pressure is known as gauge pressure. Relative pressure is another name for gauge pressure.
From the continuity equation;
[tex]\rm A_1v_1=A_2v_2 \\\\ \rm \frac{\pi}{4}(6)^2 \times 5 = \frac{\pi}{4}(3)^2 v_2 \\\\ v_1 = 20 \ m/sec[/tex]
The gauges pressure in the higher part is found as;
From the Bernoullis equation;
[tex]\rm \frac{P_1}{\rho g} + \frac{v_1^2}{2g} +Z_1 = \frac{P_2}{\rho g} + \frac{v_2^2}{2g} +Z_2 \\\\ \frac{80 \times 10^3 }{\rho g} + \frac{(5)^2}{2g} +0= \frac{p_2}{\rho g} + \frac{(20)^2}{2g} +3 \\\\ \frac{80 \times 10^3 - P_2 }{1000 \times 9.81 } = \frac{20^2-5^2}{2 \times 9.81 } +3 \\\\ P_2 = 136 \ kpa[/tex]
Hence the gauge pressure in the higher part will be 136 kpa.
To learn more about the gauge pressure refer to the link;
https://brainly.com/question/14012416
#SPJ1
A stone is dropped from the top of a tall building. As it falls in the absence of air resistance, what happens to the de broglie wavelength of the stone?.
Explanation:
lambda = h/mv
hieght is decreasing
velocity is increasing
therfore the wavelength is decreasing.
A circular loop (10 turns) with a radius of 29 cm is in a magnetic field that
oscillates uniformly between 0.95 T and 0.45 T with a period of 1.00 s.
a. How much time is required for the field to change from 0.95 T to 0.45 T?
b. What is the cross-sectional area of one turn of the loop?
c. Assuming that the loop is perpendicular to the magnetic field, what is the
induced emf in the loop?
At a distance of 10 km from a radio transmitter, the amplitude of the electric field is 0. 20 volts/meter. What is the total power emitted by the radio transmitter?.
a. 10 kW b. 67 kW c. 140 kW d. 245 kW e. 21 kW
A geyser has a rating 2 kVA, 240 V. (a) what is the electrical energy consumed by it in (i) kWh and (ii) joule if it is used for 90 mins. (b) if the cost of electricity is rupees 4.50 per commercial unit find the cost.
See below~
Explanation:
Given, P = 2 kVA = 2 kW,
t = 90 min = 1.5 h
(a) (i) Electrical Energy Consumed = power * time
= 2 kW x 1.5 h
= 3 kWh ( or 3 commercial unit)
(ii) Since 1 kW = 3.6 x 10^6 J
therefore,
Electrical energy consumed = 3 x 3.6 x 10^6 J
= 1.08 x 10^7 J
(b) Cost of electricity
= energy consumed in kWh x cost per kWh
= 3 x Rs 4.50 = Rs. 13.50
Hope it helps you!!A ball on the end of a string is revolving at a uniform rate in a vertical circle of radius 97.7 cm. If its speed is 3.74 m/s, and its mass is 0.182 kg, calculate the tension (in newtons) in the string when the ball is at the bottom of the path.
The tension in the string when the ball is at the bottom of the path is 2.61 Newtons.
TensionA tension is simply referred to as a force along the length of a flexible medium such as strings, cable, ropes etc.
Tension in a string revolving can be determined using the expression;
T = mv² / r
Where m is mass of object, v is velocity and r is radius ( length of string )
Given the data in the question;
Mass of ball m = 0.182kgRadius ( length of string ) r = 97.7cm = 0.977mVelocity = 3.74m/sTension in the string; T = ?To determine tension in the string, we substitute our given values into the expression above.
T = mv² / r
T = (0.182kg × (3.74m/s)²) / 0.977m
T = (0.182kg × 13.9876m²/s²) / 0.977m
T = (2.5457432kgm²/s²) / 0.977m
T = 2.61kgm/s²
T = 2.61N
Therefore, the tension in the string when the ball is at the bottom of the path is 2.61 Newtons.
Learn more about Tension here: https://brainly.com/question/14351325
Electric Charge
Directions: Identify each of the following as a conductor or an insulator by putting a “c” or an “i” in the blank.
The materials that are conductors are Metal doorknob, Silver, Gold, Copper, Metal coat hanger, Paper clip, while insulators are Carpet, Wood, Rubber, Bulletin board, Clothing, Plastic.
What are electric conductors?
Conductors are materials that allow electric current to pass through them.
What are Insulators?Insulators are materials that do not allow electric current to pass through them.
Examples of conductorsMetal doorknobSilver GoldCopperMetal coat hangerPaper clipExamples of insulatorsCarpet WoodRubberBulletin boardClothingPlasticLearn more about conductors and insulators here: https://brainly.com/question/492289
I need HELP
What kind of wave is produced, if a rope is moved as shown in the image below?
Group of answer choices
Both longitudinal and transverse
Transverse
Neither longitudinal nor transverse
Longitudinal
Answer:
Transverse
Explanation:
The direction of propagation is perpendicular to the motion of the hand. Therefore the wave undergoes a vertical stretching, which is characteristic of transverse waves. Longitudinal waves stretch horizontally.
i is trying to explain why the endoplasmic reticulum is important. Which of these analogies for the e
ulum would best help her with this explanation?
The endoplasmic reticulum is like a set of raw materials used to build bricks.
The endoplasmic reticulum is like a truck that transports newly made bricks out of the factory.
The endoplasmic reticulum is like a factory that helps produce, process, and transport bricks.
The endoplasmic reticulum is like a construction worker that builds a structure with bricks.
Answer:
i will say that the endoplasmic reticulum is a complex organelle that plays a pivotal role in protein and lipid synthesis, calcium storage and stress response
an aeroplane flies with a velocity of 100km/h at an angle of 60 to the horizontal. Calculate its effective velocity in the notherly direction and easterly direction
Explanation:
to find the velocity across the positive y direction we multiply 100 by sin60.
to find the velocity across the positive x direction we multiply 100 by cos60.
horizontal: 50 km/h
vertical: 86.6 km/h
make sure to ask if you need any further guidance.
Part B For this activity, you'll analyze the motion of the marked spot on the skateboarder's leg. For each dropdown labeled “cm” or “model cm,” change the option to “Legs.” In each frame containing a plot or table, you can use the buttons at the top of the frame to choose whether it shows a plot (graph) or a table. If it is showing a plot, you can select the y-axis label to choose which measurement to plot. See how to change the graph and table options. Now look at the graphs for the horizontal and vertical displacement of the legs against time. How do the two graphs, x vs. t and y vs. t appear? What can you say about the displacement of the snowboarder?
Answer:
Explanation:
c. By using the Select Data button and the Select Data Source optionExplanation:A scatter plot is a plot which is used to plot the points of the data on the horizontal and the vertical axis also it depicts how one variable is affected by the another. After preparing the scatter plot to enter the data in the scatter plot we need to use the data button and then data source option so that the data could be entered in the scatter plothence, option c is correct
The two graphs, x vs. t and y vs. t that are displacement vs time appear by using the Select Data button and the Select Data Source option.
What is Displacement?Displacement is defined as the change in position of an object. It is a vector quantity and has a direction and magnitude.
A scatter plot is a plot which is used to plot the points of the data on the horizontal and the vertical axis also it depicts how one variable displacement is affected by the another. After preparing the scatter plot to enter the data in the scatter plot we need to use the data button and then data source option so that the data could be entered in the scatter plot.
The two graphs, x vs. t and y vs. t that are displacement vs time appear by using the Select Data button and the Select Data Source option.
To learn more about displacement refer to the link:
brainly.com/question/11934397
#SPJ2
Español:
¿Me podrian ayudar con esta pregunta? <3
Las aplicaciones de la diferencia potencial en la vida cotidiana.
English:
Could you help me with this question? <3
The applications of the potential difference in everyday life.
Las diferencia de potencial indica el valor de la fuerza o potencial eléctrico entre dos puntos, lo cual permite llevar electricidad a diferentes areas.
¿Qué significa diferencia de potencial?La diferencia de potencial indica la fuerza ejercida por una corriente eléctrica entre dos puntos equidistantes.
La diferencia de potencial se mide en Volts, es decir, en voltaje (V), el cual indica la fuerza de la energía eléctrica que se puede transmitir entre dos puntos.
La diferencia de potencial nos permite tener energía en una vivienda o en una industria, como asi tambien usar un artefacto que requiera de electricidad para funcionar.
Aprende más sobre la diferencia de potencial aquí:
https://brainly.com/question/25094659
If a radio wave carries information by changing the amplitude of the transmitted wave, what kind of broadcast might it possibly be?
A) AM radio and analog TV video
B) AM radio only
C) FM radio only
D) FM radio and analog TV sound
When constructive interference happens between two sound waves, the sound will get louder. What does this tell you about the relationship between amplitude and volume of sound?
Answer:
If the amplitude increases the volume increases and vice versa.So therefor the volume depends on how high or low the amplitude is.
When two or more sound waves occupy the same space, they affect one another. The waves do not bounce off of each, but they move through each other. The resulting wave depends on how the waves line up.
With constructive interference, two waves with the same frequency and amplitude line up – the peaks line up with peaks and troughs with troughs as in diagram A above. The result is a wave that has twice the amplitude of the original waves so the sound wave will be twice as loud.
9. What voltage is applied to a 20 ohm fixed resistor if the current through the resistor is 1.5 amps?
Question :-
What Voltage is applied to a 20 Ohm fixed Resistor, if the Current through the Resistor is 1.5 Ampere ?Answer :-
Voltage of the Device is 30 Volt's .Explanation :-
As per the provided information in the given question, The Resistance is given as 20 Ohm's . Current is given as 1.5 Amperes . And, we have been asked to calculate the Voltage .
For calculating the Voltage , we will use the Formula :-
[tex] \bigstar \: \: \: \boxed {\sf { \: Voltage \: = \: Current \: \times \: Resistance \: }} [/tex]
Therefore , by Substituting the given values in the above Formula :-
[tex] \Longrightarrow \: \: \: \sf { Voltage \: = \: Current \: \times \: Resistance } [/tex]
[tex] \Longrightarrow \: \: \: \sf { Voltage \: = \: 1.5 \: \times \: 20 } [/tex]
[tex] \Longrightarrow \: \: \: \bf { Voltage \: = \: 30 } [/tex]
Hence :-
Voltage of Device = 30 Volt's .[tex] \underline {\rule {180pt}{4pt}} [/tex]
Additional Information :-
[tex]\Longrightarrow \: \: \: \sf {Voltage \: = \: Current \: \times \: Resistance} [/tex]
[tex] \Longrightarrow \: \: \: \sf {Current \: = \: \dfrac {Voltage}{Resistance}} [/tex]
[tex] \Longrightarrow \: \: \: \sf {Resistance \: = \: \dfrac {Voltage}{Current} } [/tex]
Answer:
30 VoltsExplanation:
Given:
Resistance = 20 ohmCurrent = 1.5 AmperesTo Find:
VoltageSolution:
Using formula:
Voltage = Current × ResistanceBy Substituting the required values,
⇢ Voltage = 1.5 × 20
⇢ Voltage = 30 Volts.
Hence,
The required Voltage is 30 voltsWhat is the difference between tidal volume and vital capacity.
Tidal volume is the amount of air that moves in and out of the lungs, while vital capacity is the maximum amount of air a person can expel.
What is tidal volume?Tidal volume is the amount of air that moves in or out of the lungs with each respiratory cycle.
What is vital capacity?Vital capacity is the maximum amount of air a person can inhale after a maximum exhalation or maximum amount of air a person can expel from the lungs after a maximum inhalation.
Difference between tidal volume and vital capacityTidal volume is the amount of air that moves in and out of the lungs, while vital capacity is the maximum amount of air a person can expel from the lungs after a maximum inhalation.
Learn more about vital capacity here: https://brainly.com/question/14877276
Blowing up a balloon and letting it go is an example of newton’s.
Answer:
Third Law Of Motion
Explanation:
When we let go of the end, the air rushes out and pushes against the air around the balloon to move it in the opposite direction. Newton describes this effect in his third law.
The blowing up of a balloon and letting it go is an example of newton's third law of motion or action-reaction law.
What is newton's third law?According to Newton's third law, when two bodies come into contact, they exert forces on one another that really are equal in strength and pointed in the opposite direction. The third law is frequently referred to as the law of actions and consequences.
This law applies to bodies in constant or rapid motion and is crucial for understanding problems of static balance, where all forces are in balance. It doesn't only use bookkeeping techniques; the forces it portrays are actual forces. A book laying on a table, for instance, exerts a downwards force equal to its weight on the table. The third law states that the book is subjected to an equal and opposing force from the table.
To know more about newton's third law:
https://brainly.com/question/23772134
#SPJ5
Why is the phase of the moon important for a solar eclipse to occur?.
Suppose the sphere is positively charged. Is it attracted to, repelled by, or not affected by the magnet?.
When a positively charged sphere is brought near the north pole of a magnet, the positively charged sphere will be attracted to the magnet.
Positively charged objectWhen a positively charged object is brought near the north pole of a magnet, the positively charged object will be attracted to the magnet beacuse of polarity.
Positively charged metals have the tendency to show the polarization of charges.
Thus, when a positively charged sphere is brought near the north pole of a magnet, the positively charged sphere will be attracted to the magnet. Also, if the south pole is brought near the sphere, the positively charged sphere will repel the magnet.
Learn more about attraction of magnet here: https://brainly.com/question/14749231
Place the following types of electromagnetic radiation in order from LOWEST energy
to HIGHEST energy?
(A) visible light (B) gamma rays (C) radio waves
1. А, С, В
2.С, А, В
3.В, С, А
4.С, В, А
Placing the electromagnetic radiation in order from the lowest energy to the highest energy : ( 2 ) C,A,B
Electromagnetic spectrumIn the electromagnetic spectrum the electromagnetic radiation with the shorter wavelength possess a higher energy while the electromagnetic radiation with a longer wavelength possess the lower energy.
The electromagnetic radiation as listed in the question with the longest wavelength is the radio waves therefore it possess the lowest energy while the radiation with the shortest wavelength is the gamma rays therefore it possess the highest energy.
Hence we can conclude that Placing the electromagnetic radiation in order from the lowest energy to the highest energy : ( 2 ) C,A,B
Learn more about electromagnetic spectrum : https://brainly.com/question/25847009