What is the temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm?

Phosphate is any salt or ester of phosphoric acid with the chemical formula PO₄³-

According to this question, a chemical compound with the formula; FePO₄ was given. The iron ion has a 3+ charge and the phosphate ion has a 3- charge.

Charge of an ion can be estimated by finding the difference between the number of protons and electrons in the atom.

Phosphate is an ion with charge of -3, hence, it complements an iron ion with charge +3 to form a neutral compound.

Learn more about phosphate at: https://brainly.com/question/30594957

#SPJ1

Eighteen turns of the Calvin cycle would produce 36 G3P molecules.

The Calvin cycle, also known as the dark cycle, is a metabolic process that occurs in plants and algae. The cycle is made up of a series of chemical reactions that convert carbon dioxide into glucose.

Glyceraldehyde 3-phosphate (G3P) is a three-carbon sugar that is one of the products of the Calvin cycle. Six CO2 molecules and six ribulose-1,5-bisphosphate molecules enter the cycle to create twelve 3-phosphoglycerate molecules.

Twelve ATP molecules and twelve NADPH molecules are then used to transform the 3-phosphoglycerate molecules into twelve G3P molecules. Ten out of twelve G3P molecules are used to regenerate six ribulose-1,5-bisphosphate molecules, while two are used to create glucose or other organic compounds.

Each turn of the Calvin cycle produces one G3P molecule, while each glucose molecule requires two G3P molecules. This implies that 36 G3P molecules would be produced by 18 turns of the Calvin cycle.

To know more about Calvin cycle, refer here:

https://brainly.com/question/30808737#

#SPJ11

Answer: The l designation of amino acids used in peptide synthesis is based on the absolute configuration of l-glyceraldehyde. The structure of l-glyceraldehyde is achiral, meaning that it does not have a mirror image. Its molecular formula is C₃H₆O₃, and its structure is: l-Glyceraldehyde structure.

What is the meaning of the L-designation of amino acids?

Amino acids are essential components of proteins that play a crucial role in various biological processes. Amino acids have a chiral center and can exist in two enantiomeric forms: L- and D-.

To represent the configuration of amino acids, L- and D-designations are used. L-amino acids have the amino group on the left side of the chiral carbon, while D-amino acids have the amino group on the right side of the chiral carbon.

The L-designation of amino acids used in peptide synthesis is based on the absolute configuration of L-glyceraldehyde. L-glyceraldehyde is a chiral compound with two enantiomers: L-glyceraldehyde and D-glyceraldehyde.

It is an Aldo triose with a molecular formula of C3H6O3. The L-glyceraldehyde has an OH group on the left side of the chiral center, and the D-glyceraldehyde has an OH group on the right side of the chiral center.

The L- and D-designations for amino acids are used to distinguish between different enantiomers of amino acids. The L-amino acids are used in proteins, while D-amino acids are found in bacterial cell walls and other biological processes.

Learn more about amino acids here:

https://brainly.com/question/14583479#

#SPJ11

The balanced chemical equation for the reaction between carbon dioxide gas and liquid water to produce aqueous carbonic acid is given below.

[tex]CO_2(g) + H_2O(l)[/tex] ⇌ [tex]H_2CO_3(aq)[/tex]

Here, the forward reaction is the dissolution of carbon dioxide in water, and the reverse reaction is the release of carbon dioxide from carbonic acid.

Carbonic acid is a weak acid that forms when carbon dioxide reacts with water. It can be shown that the reaction between carbon dioxide and water is a reversible reaction, which means that the carbonic acid can also dissociate into carbon dioxide and water.

To write a balanced chemical equation, we follow these steps:

Using the above steps we get the following balanced chemical equation for the reaction of carbon dioxide and liquid water.

[tex]CO_2(g) + H_2O(l)[/tex] ⇌ [tex]H_2CO_3(aq)[/tex]

To learn more about balanced chemical equations refer - https://brainly.com/question/14427845

#SPJ11

A cell must keep a similar concentration of dissolved substances with the fluid surrounding them because it helps in maintaining homeostasis.

Homeostasis is the ability of the body to regulate its internal environment in order to maintain a stable, constant condition. For example, the body regulates temperature, blood sugar levels, pH levels, and other factors to maintain a stable internal environment.

When there is an imbalance in the concentration of dissolved substances between the cell and its surrounding fluid, the cell is at risk of losing or gaining too much water. This can cause the cell to swell or shrink, which can interfere with its normal functions.

To maintain homeostasis, the cell needs to regulate the movement of substances across its membrane in response to changes in the concentration of dissolved substances in the surrounding fluid. By doing so, the cell can maintain a stable internal environment and function properly.

For more question on homeostasis click on

https://brainly.com/question/13127022

#SPJ11

UV active compounds are those that fluoresce when exposed to a UV lamp. Upon exposure to UV light, these compounds absorb energy and promote an electron from the HOMO to the LUMO. Consider which wavelengths are included in the UV range. CH2=CH2, CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, CH2=CH-CH2-

CH=CH, and CH, =CH-CH=CH are all examples of UV active compounds.


The UV active compounds in the given list are CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, and CH2=CH-CH2-CH=CH. These compounds will **fluoresce** when exposed to a **UV lamp** and absorb energy to promote an electron from the HOMO to the LUMO.

To determine if a compound is UV active, consider the presence of **chromophores** within the molecule. Chromophores are functional groups that absorb UV light, typically containing conjugated double bonds or aromatic rings. In this case, the first three compounds have conjugated double bonds, making them UV active. The fourth compound, CH=CH-CH=CH, lacks sufficient conjugation to be UV active.

For more similar questions on topic dissociate

brainly.com/question/15321204

#SPJ11

Answer:

The octet rule is a guideline that suggests that atoms tend to combine in a way that allows each atom to have eight electrons in its outermost energy level (except for hydrogen, which is stable with two electrons). However, there are some molecules that do not obey the octet rule. Here are two common types of exceptions and examples of molecules that fall into each category:

Incomplete Octet: In this type of exception, the atoms in the molecule do not have a complete octet of valence electrons. Examples of molecules that have incomplete octets include beryllium chloride (BeCl2) and boron trifluoride (BF3).

In beryllium chloride, beryllium has only four valence electrons, while chlorine has seven. When the two atoms combine, beryllium shares its electrons with two chlorine atoms, but it still has only four electrons around it, which is fewer than the octet rule suggests. In boron trifluoride, boron has only three valence electrons, while fluorine has seven. When the two atoms combine, boron shares its electrons with three fluorine atoms, but it still has only six electrons around it, which is also fewer than the octet rule suggests.

Expanded Octet: In this type of exception, the atoms in the molecule have more than eight valence electrons. Examples of molecules that have expanded octets include sulfur hexafluoride (SF6) and phosphorus pentachloride (PCl5).

In sulfur hexafluoride, sulfur has six valence electrons, while each of the six fluorine atoms has seven valence electrons. When the atoms combine, sulfur shares its electrons with all six fluorine atoms, resulting in a total of 12 electrons around the sulfur atom, which is more than the octet rule suggests. In phosphorus pentachloride, phosphorus has five valence electrons, while each of the five chlorine atoms has seven valence electrons. When the atoms combine, phosphorus shares its electrons with all five chlorine atoms, resulting in a total of 10 electrons around the phosphorus atom, which is also more than the octet rule suggests.

In both cases, the atoms in these molecules are able to deviate from the octet rule due to the availability of empty d orbitals in the central atom that can accommodate additional electrons beyond the octet. Additionally, the size and electronegativity of the atoms involved in the bonding also play a role in determining whether the molecule will obey the octet rule or not.

The SN1 mechanism for the reaction of tert-butyl alcohol with aqueous HX involves the formation of an intermediate carbocation, which is then attacked by a halide ion (H⁻) to form the alkyl halide product.

Step 1:The reaction begins with the protonation of the tert-butyl alcohol molecule by HX.

Step 2: The highly reactive carbocation intermediate then undergoes loss of a leaving group, water(H₂O) resulting in the formation of the carbocation species, t-C₄H₉⁺.

Step 3:  Subsequently, a halide ion from HX performs a nucleophilic attack on the carbocation species, forming the alkyl halide product, tert-C₄H₉X , and a hydronium ion.

Step 4: The reaction reaches completion with the release of the hydronium ion and the formation of the alkyl halide product.

To know more about SN1 mechanism here

https://brainly.com/question/30598974

#SPJ4

The chemical name of water is hydrogen oxide.

Water is a compound with the chemical name hydrogen oxide (H2O).

It is a colorless, odorless, and tasteless liquid that is essential for most forms of life on Earth.

Water is a chemical molecule; therefore, its many forms have different names depending on their individual constituents. According to the nomenclature established by the IUPAC, water may alternatively be referred to as dihydrogen monoxide, dihydrogen oxide, hydrogen hydroxide, or hydric acid.

Being the primary component of Earth's hydrosphere and the fluids of all known forms of life, water (chemical formula H 2 O) is an inorganic, clear, tasteless, odorless, and almost colorless chemical substance (in which it acts as a solvent). None of the known forms of life could survive without it, despite the fact that it offers neither dietary energy nor organic micronutrients.

Water is made up of two hydrogen atoms and one oxygen atom, with the formula H2O.

To know more about the water chemically https://brainly.com/question/28885148

#SPJ11

Intramolecular products are preferred over intermolecular products in certain reactions because they are usually more stable and have lower activation energy.

The following are the main reasons why the intramolecular product is the major product:

Regioselectivity is a term used to describe a reaction's ability to form a specific constitutional isomer. In other words, it refers to the preference of a reaction for certain regions of the same compound. Regioselectivity is typically determined by the reaction's mechanism and the steric or electronic effects of the reactants.

In a reaction where a molecule undergoes multiple changes, for example, intramolecular reactions, regioselectivity refers to the selectivity of one or more of these changes.

Learn more about Regioselectivity at https://brainly.com/question/29410845

#SPJ11

The molar mass of sodium phosphate, Na3PO4 is 163.9 g/mol.  Molar mass is the mass of a mole of a substance. A mole is a quantity of substance that contains 6.022 × 1023 particles, such as atoms or molecules. Molar mass is typically calculated in grams per mole (g/mol).

Formula for finding the molar mass of a compound The molar mass of a compound can be calculated using the following formula; Molar mass (M) = sum of the atomic masses of all the atoms present in the compound. The atomic masses of all the elements can be obtained from the periodic table.

The molar mass of a substance is usually expressed in g/mol. Sodium phosphate is a combination of sodium and phosphate ions. It is found in different forms like dibasic and tribasic. Dibasic sodium phosphate is known as sodium hydrogen phosphate or NaHPO4, and tribasic sodium phosphate is known as Na3PO4.

Its chemical formula is Na3PO4.Sodium phosphate is commonly used as a saline laxative to clear the bowel before medical procedures. Sodium phosphate is also used in the food industry as a food additive, emulsifying agent, and thickener.

to know more about Molar mass refer here:

https://brainly.com/question/22997914#

#SPJ11

The given statement "every atom in the universe emits energy in the form of a nucleus" is False.

In the universe, every atom does not emit energy in the form of a nucleus. It is not true in the case of every atom in the universe. But it is true that every atom in the universe emits energy.

According to the Bohr model of the atom, an electron orbiting an atomic nucleus emits radiation when it changes its energy level. The radiation emitted by the electron is in the form of a photon of electromagnetic energy. This is a spontaneous process and it is called spontaneous emission. It can be said that every atom in the universe emits energy.

Therefore, it is false that every atom in the universe emits energy in the form of a nucleus.

To know more about the atom, refer here:

https://brainly.com/question/1566330#

#SPJ4

In a 2A redox reaction, there are 4 electrons exchanged. The species that loses electrons is the oxidized species, and the species that gains electrons is the reduced species.

Explanation: In the given reaction, Fe is oxidized and Cr is reduced. There are six electrons exchanged in 2a.How many electrons are exchanged in 2a?In the given redox reaction,Fe2+(aq) + Cr2O72-(aq) → Fe3+(aq) + Cr3+(aq)The given reaction can be split into half reactions:Fe2+ (aq) → Fe3+ (aq) + e- (Oxidation)Cr2O72- (aq) + 14H+(aq) + 6e- → 2Cr3+(aq) + 7H2O(l) (Reduction)The reaction Fe2+(aq) + Cr2O72-(aq) → Fe3+(aq) + Cr3+(aq) involves the exchange of six electrons in 2a.Therefore, there are six electrons exchanged in 2a.Which species is oxidized and which is reduced?In the given reaction, Fe is oxidized and Cr is reduced.The oxidation half-reaction Fe2+ (aq) → Fe3+ (aq) + e- has Fe on both the left and right sides of the equation. As a result, the oxidation state of iron has gone from +2 to +3. Therefore, iron has lost electrons and has been oxidized.The reduction half-reaction Cr2O72- (aq) + 14H+(aq) + 6e- → 2Cr3+(aq) + 7H2O(l) involves the gain of electrons by chromium. As a result, the oxidation state of chromium has gone from +6 to +3. Therefore, chromium has gained electrons and has been reduced.In the given reaction, Fe is oxidized and Cr is reduced.

For more such questions on redox

https://brainly.com/question/23863329

#SPJ11

Answer:From the thermostatically equation, 114.6 kJ of heat is released per 2 moles of nitrogen dioxide produced.

Explanation:I really hope this helps!! :) Have a great spring break!!

Activities I have carried out over the last three days that involved Physical and Chemical changes are:

Two activities that involve physical changes are:

1. Cutting vegetables to cook. We cut vegetables to cook them. It is a physical change because the cut vegetables have the same chemical composition as the uncut ones. The pieces have only been divided into smaller ones.

2. Burning a candle. Burning a candle is a physical change because the wax and wick remain unchanged, but the melted wax forms new substances (carbon dioxide and water vapor).

Two activities that involve chemical changes are:

1. Baking a cake: Baking a cake is a chemical change since the heat causes the ingredients (flour, sugar, butter, eggs, etc.) to react and form new substances (cake).

2. Digesting food: Digesting food is a chemical change since the body breaks down complex food molecules into simpler ones so that they can be absorbed into the bloodstream. This is done with the help of digestive enzymes.

Hence, these are the everyday activities that can be done for physical and chemical changes.

To know more about physical and chemical changes, refer here:

https://brainly.com/question/11321843#

#SPJ11

The quantity of carbon present in moles is 3.36 x 10^23 moles.

The compound analyzed contains 0.1935 g of carbon, 0.0325 g of hydrogen, and 0.2043 g of fluorine.

The molar mass of the compound is 240.23 g/mol.

1. First, calculate the molecular mass of the compound by multiplying the mass of each element by its molar mass.

2. Divide the mass of carbon by the molecular mass of the compound.

3. Multiply the result by Avogadro's number (6.022 x 10^23).

Molecular mass = 0.1935 g x 12.011 g/mol (Carbon) + 0.0325 g x 1.008 g/mol (Hydrogen) + 0.2043 g x 18.998 g/mol (Fluorine) = 240.23 g/mol.

Moles of Carbon = 0.1935 g / 240.23 g/mol x 6.022 x 10^23 = 3.36 x 10^23 moles.

Therefore, the quantity of carbon present in moles is 3.36 x 10^23 moles.

to know more about carbon refer here:

https://brainly.com/question/22530423#

#SPJ11

Adding a small amount of acid to a buffer does not change the pH because the weak acid is quickly neutralized by the weak base present in the buffer.

The reaction forms new components which are able to absorb further amounts of acid or base, keeping the pH relatively constant.

However, adding a large amount of acid to the buffer can change the pH because it exceeds the capacity of the buffer to neutralize it. This will result in the pH becoming more acidic.

The buffer is composed of a weak acid and its conjugate base. When a small amount of acid is added to the buffer, the weak acid is quickly neutralized by the weak base, forming new components that are able to absorb additional amounts of acid or base.

This means that the pH of the buffer remains relatively constant, even when small amounts of acid or base are added.

However, when a large amount of acid is added to the buffer, it exceeds the buffer’s capacity to neutralize it.

This results in the pH becoming more acidic, as the acid molecules outnumber the molecules of the weak base in the buffer. The pH will only return to its original value when the buffer has been ‘recharged’ with the weak base.

To know more about pH click on below link:

https://brainly.com/question/15289741#

#SPJ11

The statement, "if a gas is colder than its critical temperature, less pressure is required to liquefy it," is true.

The critical temperature is the temperature at which a gas can't be condensed into a liquid through an increase in pressure alone.

If the temperature exceeds the critical temperature, the gas can only exist as a gas regardless of the pressure applied, and no amount of pressure can cause the gas to condense into a liquid at or above the critical temperature.

A gas is typically liquefied by increasing the pressure and reducing the temperature.

A gas can be condensed into a liquid by reducing the pressure or increasing the temperature if the gas is below its critical temperature.

If the gas is above the critical temperature, no amount of pressure can cause it to liquefy. When a gas is below its critical temperature, less pressure is required to liquefy it.

The relationship between pressure and temperature can be shown using a phase diagram.

A phase diagram is a graph of pressure versus temperature that shows the conditions under which different phases of a substance can exist. The critical temperature is depicted as a point on a phase diagram.

Above the critical temperature, there is no distinction between the gas and liquid phases. Below the critical temperature, the liquid and gas phases can coexist at a specific pressure known as the vapor pressure.

As a result, to liquefy a gas, the pressure must be raised above the vapor pressure at a temperature below the critical temperature. Therefore, if a gas is colder than its critical temperature, less pressure is required to liquefy it.

to know more about temperature refer here:

https://brainly.com/question/11464844#

#SPJ11

Explanation:

The Air Quality Index (AQI) informs the public about daily air quality levels, including the amount and size of particulate matter in the air. It provides a standardized measurement to help people understand how clean or polluted the air is in their area and how it may affect their health. The AQI typically reports levels of common air pollutants such as ground-level ozone, particulate matter (PM2.5 and PM10), carbon monoxide, sulfur dioxide, and nitrogen dioxide. The AQI scale ranges from 0 to 500, with higher values indicating more severe air pollution and greater potential health effects.

The density of the unknown sample is 1.025 g / mL and its salt composition is 3.55 %.

PART A: Density of a regular shaped object:

Trial 1: mass of the object = 162.20 g

volume of object = L x H x W = 4.90 cm x 3.90 cm x 2.90 cm

= 55.419 cm^3

Therefore density of the object = mass / volume = 162.20 g / 55.419 cm^3

= 2.9268 g/cm^3

trial 2: mass of the object = 162.18 g

volume of object = L x H x W = 4.89 cm x 3.90 cm x 2.88 cm

= 54.92448 cm^3

Therefore density of the object = mass / volume = 162.18 g / 54.92448 cm^3

= 2.9528 g/cm^3

Average = [ 2.9268 + 2.9528 ] /2 = 5.8796 / 2 = 2.9398 g / cm^3 = 1.94 g / cm^3.

The accepted value is 2.73 g / cm^3 for aluminium. The difference is 0.21

% error = 100 x difference / accepted value = 100 x 0.21/2.73 = 7.7 %.

---------------------------------------------------------------------------------------------------

Part B: Determination of density of an irregular shaped object:

Trial 1:

mass of the marble chips = 10.25 g

Volume of the marble chip = final volume of water - initial volume of water

= 53.8 - 50 = 3.8 mL

Therefore density of marble chip = mass / volume = 10.25 g / 3.8 mL

= 2.697 g / mL

Trial 2:

mass of the marble chips = 10.32 g

Volume of the marble chip = final volume of water - initial volume of water

= 53.9 - 50.1 = 3.8 mL

Therefore density of marble chip = mass / volume = 10.32 g / 3.8 mL

= 2.716 g / mL

Average = [2.697 + 2.716] / 2 = 5.413 / 2 = 2.71 g / mL

The accepted density of marble chip = 2.70 g / mL The difference is 0.01

% error = 100 x difference / accepted value = 100 x 0.01/ 2.70 = 0.37 %.

--------------------------------------------------------------------------------------------------------------------

PART C: Determination of density of saline solution:

Trial 1:

Volume of the saline solution = 10 mL

mass of the saline solution = finall mass - initial mass

= 35.66 - 25.36 = 10.3 g

Density of the saline solution = mass / volume = 10.3 g / 10 mL = 1.03 g / mL

Trial 2:

Volume of the saline solution = 10 mL

mass of the saline solution = finall mass - initial mass

= 35.55 - 25.35 = 10.2 g

Density of the saline solution = mass / volume = 10.2 g / 10 mL = 1.02 g / mL

Average =[ 1.03 + 1.02 ] / 2 = 1.025 g / mL

Thus the unknown sample B has the density of 1.025 g / mL.

The composition of salt in this solution can be determined by interpolation.

salt % = 0 + 5 x [ 1.025-0.998] / [1.036 - 0.998] ( using the values given in the table )

= 0 + 5 x 0.027 / 0.038

= 3.55 %.

Thus the density of the unknown sample is 1.025 g / mL and its salt composition is 3.55 %.

Read more about density here:

https://brainly.com/question/6838128
#SPJ1

In order to determine the rate law for an overall reaction, several experiments must be conducted. First, the reaction must be followed using an appropriate analytical technique such as spectroscopy or titrimetry.

These experiments include the following: To begin with, the reaction rate must be measured using different concentrations of reactants, including keeping one of the reactants constant and varying the other concentrations in one or two experiments.

Second, the reaction rate must be determined using several initial reactant concentrations. In this situation, the order of reaction must be determined in one or two experiments. The reaction order can be determined using graphical techniques or half-life measurements. The order of the reaction must be determined for all reactants.

Read more about the experiment:

https://brainly.com/question/17274244

#SPJ11

The electron configuration of valence electrons of carbon before and after sp hybridization are shown below:Before hybridization: 2s2 2p2After hybridization: sp2 2p2The orbital diagram before sp hybridization shows two electrons in the 2s orbital and two electrons in each of the 2p orbitals. After hybridization, the 2s orbital mixes with one of the 2p

orbitals to form two sp hybrid orbitals. These sp hybrid orbitals are oriented at 180° to each other, which allows maximum overlap with two 2p orbitals of the carbon atom. The remaining 2p orbital remains unhybridized and

unchanged. Therefore, the hybridized orbitals contain only one electron each and the unhybridized 2p orbital has two electrons.The boxes with arrows in the orbital diagram represent the orbitals and their electrons. The label "2s" is

dragged to the box representing the 2s orbital before hybridization. Similarly, the labels "2p" and "sp" are dragged to the boxes representing the unhybridized and hybridized orbitals after hybridization, respectively. The label "2p" is also dragged to the unhybridized 2p orbital after hybridization.

For more similar questions on hybridization

brainly.com/question/30902614

#SPJ11

The molality of CH3OH is 0.03077 m and the mole fraction of CH3OH is 0.1326.

To calculate the molality of CH3OH (methanol) and the mole fraction of solvent in a solution that is 7.50% by mass CH3OH in CH3CH2OH (ethanol), we can use the following steps:

1. Calculate the moles of CH3OH present in the solution:

Mass of CH3OH = 7.50% by mass × 0.100 L solution = 0.00750 L CH3OH

Moles of CH3OH = 0.00750 L ÷ 24.3 g/mol = 0.0003077 mol CH3OH

2. Calculate the molality of CH3OH:

Molality of CH3OH = moles of CH3OH ÷ 0.100 L solution

= 0.0003077 mol ÷ 0.100 L = 0.03077 m

3. Calculate the moles of CH3CH2OH present in the solution:

Mass of CH3CH2OH = 100% - 7.50% = 92.50% by mass × 0.100 L solution = 0.09250 L CH3CH2OH

Moles of CH3CH2OH = 0.09250 L ÷ 46.1 g/mol = 0.002005 mol CH3CH2OH

4. Calculate the mole fraction of CH3OH:

Mole fraction of CH3OH = moles of CH3OH ÷ total moles

= 0.0003077 mol ÷ (0.0003077 mol + 0.002005 mol) = 0.1326

Therefore, the molality of CH3OH is 0.03077 m and the mole fraction of CH3OH is 0.1326.



Learn more about moles here:

https://brainly.com/question/26416088#


#SPJ11

This mistake would lead to inaccurate results because the unknown acid wasn't completely transferred into the flask. As a result, the recorded results won’t reflect the true acid concentration of the unknown acid.

In order to obtain accurate results, all of the unknown acid must be completely transferred into the flask before titrating with a NaOH solution that was correctly standardized.

When this step is not taken, the amount of acid titrated will not be an accurate representation of the unknown acid's concentration. This leads to a lower than expected titration result, which in turn leads to inaccurate results.

It is important to remember to transfer all of the unknown acid into the flask before titrating with a standardized NaOH solution. Doing so ensures that the titration results will accurately reflect the concentration of the unknown acid.

To know more about titration click on below link:

https://brainly.com/question/2728613#

#SPJ11

The activation barrier for the reaction in kJ/mol is ≈ 78.

The activation barrier for the reaction in kJ/mol can be calculated by using the Arrhenius equation.

The Arrhenius equation is represented by the following expression:

[tex]k = A^(^-^E^a^/^R^T^)[/tex]

Where k = rate constant

A = frequency factor (pre-exponential factor)

Ea = activation energy

R = gas constant

T = temperature

The activation barrier for the reaction in kJ/mol is given by the following expression:

Ea = (R)(ln(k2/k1))/(1/T1 - 1/T2)

Where k1 and k2 are the rate constants at temperatures T1 and T2, respectively.

R is the gas constant.

Here, k1 = 0.0117/s, k2 = 0.689/s, T1 = 400.0 K, T2 = 450.0 K and R = 8.314 J/K mol

Converting the units of R to kJ/K mol,

R = 8.314/1000 = 0.008314 kJ/K mol

Therefore, the activation barrier for the reaction in kJ/mol is given by the expression:  

Ea = (0.008314 kJ/K mol) × ln (0.689/0.0117) / ((1/400.0 K) - (1/450.0 K)) ≈ 78 kJ/mol

Learn more about rate constant: https://brainly.com/question/26724488

#SPJ11

The concentration of NaOH solution that requires 37.96 mL of NaOH to titrate 0.702 g of KHP is 0.0896 M.

To calculate the concentration of the NaOH solution which requires 37.96 mL of NaOH to titrate 0.702 g of KHP, we first need to know the balanced equation of the reaction between NaOH and KHP.

The balanced equation is as follows:

NaOH(aq) + KHC₈H₄O₄(aq) = KNaC₈H₄O₄(aq) + H₂O(l)

According to the equation, one mole of NaOH reacts with one mole of KHP (potassium hydrogen phthalate) to produce one mole of NaKC₈H₄O₄ (sodium hydrogen phthalate) and one mole of H2O (water).

Thus, the mole of NaOH required to titrate KHP is:

Mole of NaOH = (mass of KHP) / (molar mass of KHP)

Molar mass of KHP = 204.22 g/mol (mass of KHP is given as 0.702 g)

Mole of NaOH = 0.702 g / 204.22 g/mol = 0.0034 mol NaOH

The volume of NaOH is also given as 37.96 mL. But we need to convert it to liter.

Liters of NaOH = 37.96 mL / 1000 mL/L = 0.03796 L

Concentration (M) of NaOH can be calculated by dividing the number of moles of NaOH by the volume of NaOH in

.

Concentration (M) of NaOH = 0.0034 mol NaOH / 0.03796 L

NaOH = 0.0896 M

Therefore, the concentration of NaOH solution that requires 37.96 mL of NaOH to titrate 0.702 g of KHP is 0.0896 M.

To know more about titration, refer here:

https://brainly.com/question/2728613#

#SPJ11

The unstable species that exists at the maximum of each energy curve, as reactants are converted to intermediates and products, is called the transition state, and the energy required to form this species from the reactants is called the activation energy for the reaction.

The transition state of a reaction is an unstable species that represents the highest energy point on the energy profile of a reaction. It is the point at which the reactants are partially converted to products and the energy has not yet been released. This unstable species is only present for a very short time and is often referred to as the “rate-determining step” as its stability dictates how quickly the reaction can take place.

The activation energy of a reaction is the minimum energy required for the reaction to take place. It is the energy required to reach the transition state and is the sum of the energies of the reactants and the energy barrier of the reaction.

In conclusion, the transition state of a reaction is the unstable species that exists at the maximum of each energy curve, as reactants are converted to intermediates and products, and the activation energy of a reaction is the energy required to reach the transition state and initiate the reaction.

To know more about activation energy, refer here:

https://brainly.com/question/10354272#

#SPJ11

60 molecules of oxygen react with 4 molecules of C6H6 to produce 24 molecules of CO2 and 12 molecules of H2O.

When C6H6 burns in oxygen gas, it reacts to produce carbon dioxide, water, and heat. The equation is:C6H6 + 15 O2 → 6 CO2 + 3 H2O

Equation shows that each molecule of C6H6 reacts with 15 molecules of oxygen to produce 6 molecules of carbon dioxide and 3 molecules of water.

molecules of oxygen react with 4 molecules of C6H6 to produce 24 molecules of CO2 and 12 molecules of H2O, we can use stoichiometry.

Stoichiometry is the study of the quantitative relationships between reactants and products in a chemical reaction.

The balanced chemical equation shows that 15 molecules of O2 react with each molecule of C6H6 to produce 6 molecules of CO2 and 3 molecules of H2O.

Use his relationship to calculate the amount of oxygen needed to produce 24 molecules of CO2 and 12 molecules of H2O.

Use he ratio from the balanced equation, we can set up a proportion:15 molecules O2 / 1 molecule C6H6 = x molecules O2 / 4 molecules C6H6

4:15 molecules O2 / 1 molecule C6H6 = x molecules O2 / 4 molecules C6H64 x 15 molecules O2 / 1 molecule C6H6 = x molecules O2x = 60 molecules O2

Therefore, 60 molecules of oxygen react with 4 molecules of C6H6 to produce 24 molecules of CO2 and 12 molecules of H2O.

to know more about oxygen refer here:

https://brainly.com/question/13370320#

#SPJ11

The concentration of sulfuric acid that remains after neutralization is 0.056 M.

To find out what concentration of sulfuric acid remains after neutralization, you will need to use the balanced equation for the reaction:

H2SO4 + 2KOH → K2SO4 + 2H2O

First, you will need to determine the moles of each reactant in the solution.

Moles can be determined using the formula:

moles = concentration x volume

In this case:

moles of H2SO4 = 0.850 L x 0.400 M = 0.34 mol

moles of KOH = 0.800 L x 0.250 M = 0.2 mol

Since the reaction is a 1:2 ratio, you will need to determine which reactant is limiting the reaction.

To do this, compare the mole ratios of the reactants:

0.34 mol H2SO4 : 0.2 mol KOH = 1.7 : 1

Since the ratio of H2SO4 to KOH is greater than 1:2, KOH is the limiting reactant. Therefore, all of the KOH is used up in the reaction, leaving some H2SO4 unreacted.

To find the amount of H2SO4 remaining, you will need to use the mole ratio of H2SO4 to KOH.

Since 2 moles of KOH react with 1 mole of H2SO4, you can use the mole ratio:

0.2 mol KOH x (1 mol H2SO4 / 2 mol KOH) = 0.1 mol H2SO4 remaining

Finally, you can determine the concentration of the H2SO4 remaining:

concentration = moles / volume

concentration = 0.1 mol / (0.850 L + 0.800 L)

concentration = 0.056 M

Therefore, the concentration of sulfuric acid that remains after neutralization is 0.056 M.

For more such questions on concentration, click on:

https://brainly.com/question/28564792

#SPJ11

No, the products obtained from the reaction of ethylbenzene with [tex]Br_2[/tex] and [tex]FeBr_3[/tex] in the presence of light or heat will be different from the products obtained from the reaction of ethylbenzene with [tex]Br_2[/tex] / light or heat.

In the first reaction, [tex]Br_2[/tex] and [tex]FeBr_3[/tex] act as a source of electrophilic bromine, which attacks the aromatic ring of ethylbenzene, leading to the formation of 1-bromoethylbenzene. The mechanism for this reaction is an electrophilic aromatic substitution, where the electrophilic [tex]Br^+[/tex] ion is generated in situ by the reaction of [tex]Br_2[/tex] with [tex]FeBr_3[/tex].

In the second reaction, [tex]Br_2[/tex] acts as a source of free radical bromine, which undergoes a free radical substitution reaction with ethylbenzene, leading to the formation of 1,2-dibromoethylbenzene. This reaction proceeds through a free radical mechanism, where the [tex]Br_2[/tex] molecule is split into two free radicals by the action of light or heat.

Therefore, the products obtained from the two reactions will be different. In the first reaction, 1-bromoethylbenzene will be formed, while in the second reaction, 1,2-dibromoethylbenzene will be formed.

To learn more about Electrophilic aromatic substitution refer to the link: https://brainly.com/question/14908357

#SPJ11