The terminal velocity of the ball is 0.000242 m/s. An item falling through a fluid at its greatest speed is said to have reached its terminal velocity. When the combined drag and buoyancy forces are equal to the force of gravity pulling the item downward, it is seen.
Earth (g=9.8 m/s2)Glycerine (Viscous Liquid) Jar Diameter: 7.0 cm, Ball Diameter: 7.0 mm Distabce between point A and B =60 cmDensity of the Liquid= 1260 (o) kg/m3 Density of the Glass Ball= 2600 (p) Kg/mTime: 19 mins 772 seconds. The formula to calculate the terminal velocity of an object is given byvt = [(2mg)/(ρACd)]^0.5
where,vt = Terminal Velocitym = mass of the objectρ = density of the fluidA = projected area of the objectCd = Drag coefficientg = acceleration due to gravity, When the object reaches its terminal velocity, the net force on the object becomes zero, and it moves with a constant speed. Here, the acceleration of the ball is zero when the ball reaches terminal velocity.
So, the net force acting on the ball is zero.Therefore, the forces acting on the ball are:Weight = mgBuoyant Force = ρgV SubmergedArchimedes' principle states that any object wholly or partially submerged in a fluid experiences an upward buoyant force equal in magnitude to the weight of the fluid displaced
by the object.m = (4/3)πr³p = (4/3)π(0.35×10⁻²)³×2600 = 0.005 kg
Volume of the submerged ball, Vsub = (4/3)πr³ = (4/3)π(0.35×10⁻²)³ = 1.179×10⁻⁵ m³Density of the glycerine, ρ = 1260 kg/m³Weight of the ball, W = mg = 0.005×9.8 = 0.049 NThe buoyant force acting on the ball is given byB = ρgVsubmerged = 1260×9.8×1.179×10⁻⁵ = 0.015 NThe net force on the ball is F = B - W = 0.015 - 0.049 = -0.034 NAs the ball is moving upwards, the direction of the net force is upwards, so it opposes the motion of the ball. Hence, the acceleration of the ball is negative, and the speed of the ball decreases.After a certain time, the speed of the ball becomes zero, which is the terminal velocity of the ball. This happens when the net force on the ball becomes zero, that is when the weight of the ball is equal to the buoyant force acting on it. Hence,W = B0.049 = 0.015We know that terminal velocity, vt = [(2mg)/(ρACd)]^0.5As the ball is moving upwards, the direction of the net force is upwards, so it opposes the motion of the ball. Hence, acceleration of the ball is negative and the speed of the ball decreases till the terminal velocity is reached.Let's assume that the ball reaches its terminal velocity v, and its cross-sectional area is A.
Then, the weight of the ball
mg = W = ρliquid × Vsubmerged × g + ρball × Vball × g.0.005×9.8 = 1260 × 9.8×1.179 × 10⁻⁵ × g + 2600 × (4/3)π(0.35×10⁻²)³/8×g.= 0.015×g + 0.0028×g= 0.0178×gg = 0.005/0.0178 = 0.281 kg/m³The value of drag coefficient depends on the shape of the object, the viscosity of the fluid, and the roughness of the surface of the object. For a smooth sphere in a viscous fluid, the value of Cd is around 0.47.
Hence,Cd = 0.47vt = [(2mg)/(ρACd)]^0.5= [(2×0.005×0.281×9.8)/(1260×π(0.35×10⁻²)²×0.47)]^0.5= 0.000242 m/s.
To know more about terminal velocity
https://brainly.com/question/2654450
#SPJ11
Find the magnitude of the force the Sun exerts on Venus. Assume the mass of the Sun is 2.0×10 30
kg, the mass of Venus is 4.87×10 24
kg, and the orbit is 1.08×10 8
km. Express your answer with the appropriate units.
Given: Mass of the Sun, m₁ = 2.0 × 10³⁰ kgMass of Venus, m₂ = 4.87 × 10²⁴ kg Orbit of Venus, r = 1.08 × 10⁸ km or 1.08 × 10¹¹ mG = 6.67 × 10⁻¹¹ Nm²/kg²
To find: Magnitude of the force the Sun exerts on Venus.Formula: F = G (m₁m₂/r²)Where F is the force of attraction between two objects, G is the gravitational constant, m₁ and m₂ are the masses of the two objects and r is the distance between them.
Substitute the given values in the above formula :F = (6.67 × 10⁻¹¹ Nm²/kg²) (2.0 × 10³⁰ kg) (4.87 × 10²⁴ kg) / (1.08 × 10¹¹ m)²F = 2.62 × 10²³ N (rounded to 3 significant figures)Therefore, the magnitude of the force the Sun exerts on Venus is 2.62 × 10²³ N.Answer: 2.62 × 10²³ N.
Learn more on Magnitude here:
brainly.in/question/31612285
#SPJ11
a particle carrying a charge of 8.0nC accelerates through a potential of ∆V=-10mV. what is the change in potential energy of the particle?
The change in potential energy of the particle is calculated using the formula ∆PE = q∆V, where q is the charge of the particle and ∆V is the change in potential.
The potential energy (PE) of a charged particle in an electric field is given by the equation PE = qV, where q is the charge of the particle and V is the electric potential. In this case, the particle carries a charge of 8.0 nC (8.0 × 10⁻⁹ C) and accelerates through a potential difference (∆V) of -10 mV (-10 × 10⁻³ V).
To calculate the change in potential energy (∆PE), we can use the formula ∆PE = q∆V. Substituting the given values, we have ∆PE = (8.0 × 10⁻⁹ C) × (-10 × 10⁻³ V). Simplifying the expression, we get ∆PE = -8.0 × 10⁻¹² J.
The negative sign in the result indicates that the change in potential energy is negative, implying a decrease in potential energy. This means that the particle loses potential energy as it accelerates through the given potential difference. The magnitude of the change in potential energy is 8.0 × 10⁻¹² J.
Learn more about potential energy visit:
brainly.com/question/24284560
#SPJ11
Two protons are initially at rest and separated by a distance of 1.9×10-8 m. The protons are released from rest and fly apart.
A) Find the kinetic energy (in Joules) of the two proton system when the protons are separated by a distance of 5.7E-8 m.
B) Express the answer to A) in eV.
C) Find the speed of each proton when the protons are separated by a distance of 5.7E-8 m
Part A:
Kinetic Energy of the two proton system
Kinetic Energy = Potential Energy
1/2mv² = kQ₁Q₂ / r
Where,
m = mass of proton
= 1.67 × 10^-27 kg
v = speed
Q = charge = 1.6 × 10^-19 kg
r = separation between two protons 1.9 × 10^-8
m = initial distance of separation between the protons 5.7 × 10^-8
m = final distance of separation between the protons
Q₁ = Q₂ = 1.6 × 10^-19 kg (charge on each proton)
k = Coulomb's constant = 9 × 10^9 N.m²/C²
Therefore,
Kinetic Energy = kQ₁Q₂ / r - 1/2mv² at 5.7 × 10^-8 m
distance 1/2mv² = kQ₁Q₂ / r1/2m × v²
= 9 × 10^9 × (1.6 × 10^-19)² / 5.7 × 10^-8v
= √(9 × 10^9 × (1.6 × 10^-19)² / 5.7 × 10^-8)
= 9.746 × 10^6 m/s
Kinetic Energy = 1/2mv²
= 1/2 × 2 × 1.67 × 10^-27 × (9.746 × 10^6)²
= 2.13 × 10^-12 J
Part B:
Express the answer in eV1 electron-volt
(eV) = 1.6 × 10^-19 J
2.13 × 10^-12 J
= (2.13 × 10^-12) / (1.6 × 10^-19) eV
= 13.3 MeV
Part C:
Find the speed of each proton
v = √(2K / m)
Where,
K = 1.065 × 10^-12 J
= 2.13 × 10^-12 J / 2m
= 1.67 × 10^-27 kg
Therefore,
v = √(2 × 1.065 × 10^-12 / 1.67 × 10^-27)
= 1.20 × 10^7 m/s
Hence, the speed of each proton is 1.20 × 10^7 m/s.
Learn more about speed of protons here
https://brainly.in/question/1070302
#SPJ11
In an exciting game, a baseball player manages to safely slide into second base. The mass of the baseball player is 86.5 kg and the coefficient of kinetic friction between the ground and the player is 0.44. (a) Find the magnitude of the frictional force in newtons. ____________ N
(b) It takes the player 1.8 s to come to rest. What was his initial velocity (in m/s)? ____________ m/s
Mass of baseball player, m = 86.5 kg.
Coefficient of kinetic friction, μk = 0.44.
The magnitude of the frictional force is to be calculated.
Kinetic friction is given as:
f=μkN, where N=mg is the normal force exerted by the ground on the player and g is the acceleration due to gravity.
Acceleration due to gravity, g = 9.81 m/s².
N = mg = 86.5 × 9.81 = 849.7 N.
∴f=μkN=0.44×849.7=374.188 N.
(a) The magnitude of the frictional force is 374.188 N.
(b) Mass of baseball player, m = 86.5 kg.
Initial velocity, u = ?
Final velocity, v = 0.
Time taken to come to rest, t = 1.8 s.
Acceleration, a=−v−ut=0−u1.8=−u1.8a=−u1.8
We know that force due to friction is given by f=ma So, a=f/m⇒−u1.8=−f/86.5⇒f=u1.8×86.5=153.81 N.
The force due to friction is 153.81 N. Therefore, the initial velocity of the player is
u=at+f=−u1.8+153.81=0−u1.8+153.81=153.81−u1.8u1.8=153.81u=−1.8×153.81=−276.9 m/s.
The initial velocity of the baseball player is -276.9 m/s.
Learn more about the coefficient of friction: https://brainly.com/question/14121363
#SPJ11
What is the resultant force on the charge in the center of the square? (q=1x10 C and a = 5cm). Solution: q -q 3q -q q
The resultant force on the charge in the center of the square is zero.
What is Coulomb's Law?
Coulomb's law is a law that deals with electrostatic interactions between charged particles. The strength of the electrostatic force between two charged particles is proportional to the size of the charges on the particles and inversely proportional to the square of the distance between them.
What is the resultant force on the charge in the center of the square?
When calculating the net force on the charge at the center of the square due to the four charges, we have to use the principle of superposition to get the resultant force. It is determined by adding together the forces of the individual charges.
Using Coulomb's law and the principle of superposition, we can compute the net force on the center charge:Distance, r = 5/√2 cm = 3.54 cm.
Charge on each corner, q = 1 × 10 C.Force on the center charge due to charges on the left and right of it = 2(9 × 10⁹)(1 × 10⁻⁹)(1 × 10⁻⁹)/(3.54 cm)² = 1.01 × 10⁻⁹ N to the left.
Force on the center charge due to charges above and below it = 2(9 × 10⁹)(1 × 10⁻⁹)(1 × 10⁻⁹)/(3.54 cm)² = 1.01 × 10⁻⁹ N downward.
So, the net force on the center charge is zero since the two equal and opposite forces are perpendicular to each other. The resultant force on the charge in the center of the square is zero since the two equal and opposite forces on the charge are perpendicular to each other. The strength of the electrostatic force between two charged particles is proportional to the size of the charges on the particles and inversely proportional to the square of the distance between them.
Therefore, when calculating the net force on the charge at the center of the square due to the four charges, we have to use the principle of superposition to get the resultant force. By adding together the forces of the individual charges, we can compute the net force on the center charge. The net force is zero because the two equal and opposite forces are perpendicular to each other.
So, the resultant force on the charge in the center of the square is zero.
Learn more about Coulomb's law here,
https://brainly.com/question/506926
#SPJ11
Which of following statements are INCORRECT about Quasi-static process? i. It is a non-reversible process that allows the system to adjust itself internally. ii. It is infinitely slow process. iii. Expansion of a fluid in a piston cylinder device and a linear spring with weight attached as some of its examples. iv. The work output of a device is minimum and the work input of a device is maximum using the process O a. ii, iii and iv O b. ii and iii O c. i, ii and iv O d. i and iv
The incorrect statements about the Quasi-static process are i. It is a non-reversible process that allows the system to adjust itself internally. ii. It is an infinitely slow process. iv. The work output of a device is minimum and the work input of a device is maximum using the process.
Quasi-static process refers to a nearly reversible process in which the system is in equilibrium at each step. Let's address each statement and determine its correctness:
i. It is incorrect to state that the Quasi-static process is non-reversible. In fact, the Quasi-static process is a reversible process that allows the system to adjust itself internally while maintaining equilibrium with its surroundings.
ii. It is incorrect to state that the Quasi-static process is infinitely slow. Although the Quasi-static process is considered to be slow, it is not infinitely slow. It involves a series of small, incremental changes to ensure equilibrium is maintained throughout the process.
iii. The statement is correct. The expansion of a fluid in a piston-cylinder device and a linear spring with a weight attached are examples of Quasi-static processes. These processes involve gradual changes that maintain equilibrium.
iv. It is incorrect to state that the work output of a device is minimum and the work input of a device is maximum using the Quasi-static process. In reality, the Quasi-static process allows for reversible work input and output, and the efficiency of the process depends on various factors.
In summary, the incorrect statements about the Quasi-static process are i. It is a non-reversible process that allows the system to adjust itself internally. ii. It is an infinitely slow process. iv. The work output of a device is minimum and the work input of a device is maximum using the process.
To know more about Quasi-static click here:
https://brainly.com/question/12976647
#SPJ11
A person pulls on a cord over a pulley attached to a 3.2 kg block as shown, accelerating the block at a constant 1.2 m/s 2
. What is the force exerted by the person on the rope? Enter your answer in Newtons.
The force exerted by the person on the rope is 3.84 Newtons. According to Newton's second law of motion, the net force acting on an object is equal to its mass multiplied by its acceleration.
The mass of the block is given as 3.2 kg, and the acceleration is given as 1.2 [tex]m/s^2[/tex]. Therefore, the net force acting on the block can be calculated as:
Net force = mass × acceleration
= 3.2 kg × 1.2 [tex]m/s^2[/tex]
= 3.84 N
Since the person is pulling on the cord, the force exerted by the person on the rope is equal to the net force acting on the block. Therefore, the force exerted by the person on the rope is 3.84 Newtons.
Learn more about acceleration here:
https://brainly.com/question/12550364
#SPJ11
A light plane must reach a speed of 35 m/s for take off. How long a runway is needed if the (constant) acceleration is 3 m/s27
The required runway length for a light plane to take off if the constant acceleration is 3 m/s² is 408.33 m.
How to solve the problem?
Here's a step-by-step solution to the problem:
Step 1: Write down the given variables
The plane needs to reach a speed of 35 m/s, and the constant acceleration is 3 m/s².
Step 2: Choose an appropriate kinematic equation to solve the problem
The equation v² = u² + 2as is appropriate for this problem since it relates the final velocity (v), initial velocity (u), acceleration (a), and distance traveled (s).
Step 3: Substitute the known variables and solve for the unknowns
The initial velocity is zero since the plane is starting from rest.
v = 35 m/s
u = 0 m/s
a = 3 m/s²
s = ?
v² = u² + 2as
s = (v² - u²) / 2a
Plug in the values:
v² = 35² = 1225
u² = 0² = 0
a = 3
s = (1225 - 0) / (2 x 3) = 408.33 m
Therefore, the required runway length for a light plane to take off if the constant acceleration is 3 m/s² is 408.33 m.
To learn more about constant acceleration refer:-
https://brainly.com/question/29135987
#SPJ11
Three resistors, having resistances of 4R8, 8R and 12R, are connected in parallel and supplied from a 48V supply. Calculate: (a) The current through each resistor. The current taken from the supply. (c) The total resistance of the group. (b)
Anwers:
(a) The current through each resistor is 10A, 6A, and 4A respectively.
(b) The total current drawn from the supply is 20A.
(c) The total resistance of the group is 24R/11.
To calculate the current through each resistor and the total current drawn from the supply, we can use Ohm's Law and the rules for parallel resistors.
(a) The current through each resistor in a parallel circuit is :
I = V / R
where I is the current, V is the voltage, and R is the resistance.
For the first resistor with resistance 4R8:
I1 = 48V / 4R8 = 10A
For the second resistor with resistance 8R:
I2 = 48V / 8R = 6A
For the third resistor with resistance 12R:
I3 = 48V / 12R = 4A
(b) The total current drawn from the supply is the sum of the individual currents:
Itotal = I1 + I2 + I3
= 10A + 6A + 4A
= 20A
(c) The total resistance of the group in a parallel circuit can be calculated using the formula:
1/RTotal = 1/R1 + 1/R2 + 1/R3
Substituting the resistance values:
1/RTotal = 1/(4R8) + 1/(8R) + 1/(12R)
common denominator:
1/RTotal = (3/3)/(4R8) + (2/2)/(8R) + (4/4)/(12R)
= 3/(34R8) + 2/(28R) + 4/(4*12R)
= 3/(12R8) + 2/(16R) + 4/(48R)
= 1/(4R8) + 1/(8R) + 1/(12R)
= (12 + 6 + 4)/(48R)
= 22/(48R)
= 11/(24R)
the reciprocal of both sides:
RTotal = 24R/11
Therefore, the total resistance of the group is 24R/11.
To know more about Ohm's Law
https://brainly.com/question/12372387
#SPJ11
a cubic block of materials flosts in flesh water. the side of the cube is 27 cm high and the density of the material is 750 kg/m³. how high is the side if the cube outside water. ( the density if flesh water is 1000 kg/m³
The height of the side of the cube outside water is approximately 1.46 dm.
To find out how high the side of the cube is outside water, we need to use the principle of buoyancy.
What is the principle of buoyancy?
Buoyancy is the upward force exerted by a fluid that opposes the weight of an immersed object. This principle states that the buoyant force experienced by an object immersed in a fluid is equal to the weight of the fluid displaced by that object. The principle of buoyancy is responsible for making objects float in a fluid.
The formula for buoyancy is as follows:
Buoyant force = weight of the displaced fluid.
Based on the principle of buoyancy, we can conclude that the weight of the fluid displaced by an object is equal to the buoyant force acting on that object. Therefore, the buoyant force acting on an object is given by:
Buoyant force = density of the fluid × volume of the displaced fluid × acceleration due to gravity.
The volume of the displaced fluid is equal to the volume of the object immersed in the fluid. Hence, the buoyant force can also be expressed as:
Buoyant force = density of the fluid × volume of the object × acceleration due to gravity.
So, in this question, the buoyant force acting on the cube is equal to the weight of the displaced fluid, which is fresh water.
The density of fresh water is given to be 1000 kg/m³.
The density of the cube is given to be 750 kg/m³.
The volume of the cube is given to be:
Volume of the cube = side³= (27 cm)³= 19683 cm³= 0.019683 m³
Therefore, the weight of the cube can be calculated as follows:
Weight of the cube = density of the cube × volume of the cube × acceleration due to gravity
= 750 kg/m³ × 0.019683 m³ × 9.8 m/s²= 113.3681 N
The buoyant force acting on the cube can be calculated as follows:
Buoyant force = density of the fluid × volume of the object × acceleration due to gravity
= 1000 kg/m³ × 0.019683 m³ × 9.8 m/s²= 193.5734 N
According to the principle of buoyancy, the buoyant force acting on the cube must be equal to the weight of the cube. Hence, we have:
Buoyant force = Weight of the cube
193.5734 N = 113.3681 N
This implies that the cube is experiencing an upward force of 193.5734 N due to the water.
Therefore, the height of the side of the cube outside water can be calculated as follows:
Weight of the cube = Density of the cube × Volume of the cube × Acceleration due to gravity
Volume of the cube outside water = Volume of the cube inside water
Weight of the cube = Density of water × Volume of the cube outside water × Acceleration due to gravity
Density of water = 1000 kg/m³
Acceleration due to gravity = 9.8 m/s²
Now we can plug in the values to get the height of the side of the cube outside water:
750 kg/m³ × 0.019683 m³ × 9.8 m/s² = 1000 kg/m³ × (0.019683 m³ - Volume of the cube outside water) × 9.8 m/s²
144.5629 N = 9800 m²/s² × (0.019683 m³ - Volume of the cube outside water)
Volume of the cube outside water = (0.019683 m³ - 0.0147481 m³) = 0.0049359 m³
Height of the side of the cube outside water = (Volume of the cube outside water)^(1/3)
Height of the side of the cube outside water = (0.0049359 m³)^(1/3)
Height of the side of the cube outside water ≈ 1.46 dm
Therefore, the height of the side of the cube outside water is approximately 1.46 dm.
Learn more about density:
https://brainly.com/question/952755
#SPJ11
An electric heater of resistance 18.66 Q draws 8.21 A. If it costs 30¢/kWh, how much will it cost, in pennies, to run the heater for 5 h? .
An electric heater of resistance 18.66 Q draws 8.21 A. If it costs 30¢/kWh, it will cost approximately 0.19 pennies to run the heater for 5 hours.
To calculate the cost of running the electric heater, we need to determine the energy consumed by the heater and then calculate the cost based on the energy consumption.
The power consumed by the heater can be calculated using the formula:
Power (P) = Current (I) * Voltage (V)
Since the resistance (R) and current (I) are given, we can calculate the voltage using Ohm's law:
Voltage (V) = Resistance (R) * Current (I)
Let's calculate the voltage first:
V = 18.66 Ω * 8.21 A
Next, we can calculate the power consumed by the heater:
P = V * I
Now, we can calculate the energy consumed by the heater over 5 hours:
Energy (E) = Power (P) * Time (t)
Finally, we can calculate the cost using the energy consumption and the cost per kilowatt-hour (kWh):
Cost = (Energy * Cost per kWh) / 1000
Let's calculate the cost in pennies:
V = 18.66 Ω * 8.21 A
P = V * I
E = P * t
Cost = (E * Cost per kWh) / 1000
R = 18.66 Ω
I = 8.21 A
t = 5 h
Cost per kWh = 30 ¢ = $0.30
Substituting the values:
V = 18.66 Ω * 8.21 A = 153.0126 V
P = 153.0126 V * 8.21 A = 1255.7251 W
E = 1255.7251 W * 5 h = 6278.6255 Wh = 6.2786255 kWh
Cost = (6.2786255 kWh * $0.30) / 1000 = $0.00188358765
To know more about Voltage
https://brainly.com/question/32002804
#SPJ11
field midway along the radius of the wire (that is, at r=R/2 ). Tries 0/10 Calculate the distance beyond the surface of the conductor at which the magnitude of the magnetic field has the same r=R/2. Tries 0/10
The distance beyond the surface of the conductor at which the magnitude of the magnetic field has the same r = R/2 is given by;r = R + (μ0I/2πd)
We are given the value of the magnetic field at a certain distance from the wire's center (at r = R/2).
We have to find the distance beyond the surface of the conductor at which the magnitude of the magnetic field has the same r = R/2. This can be calculated using Ampere's law.
Ampere's law states that the line integral of magnetic field B around any closed loop equals the product of the current enclosed by the loop and the permeability of the free space μ0.
The distance beyond the surface of the conductor at which the magnitude of the magnetic field has the same r = R/2 is given by;r = R + (μ0I/2πd) Where I is the current enclosed by the loop and is given by I = (2πrLσ)/(ln(b/a))
Here, L is the length of the solenoid,σ is the conductivity of the wire, and b and a are the outer and inner radii of the wire, respectively.
Putting the values we get,I = (2π(R/2)Lσ)/(ln(R/r))I = πRLσ/(ln(2))Putting the value of I in the formula of r we get,r = R + (μ0πRLσ/4dln2)At r = R/2, r = R/2 = R + (μ0πRLσ/4dln2)
Therefore, d = (μ0πRLσ/4ln2)(1/R - 1/(R/2))d = (μ0πRLσ/4ln2)(1/2R)
Writing in terms of words, the distance beyond the surface of the conductor at which the magnitude of the magnetic field has the same r=R/2 is a value that can be determined using Ampere's law. According to this law, the line integral of magnetic field B around any closed loop is equal to the product of the current enclosed by the loop and the permeability of the free space μ0.
The formula of r, in this case, can be given as r = R + (μ0πRLσ/4dln2), where I is the current enclosed by the loop, which can be determined using the formula I = (2πrLσ)/(ln(b/a)). On solving this equation, we get the value of d which comes out to be (μ0πRLσ/4ln2)(1/2R).
This distance beyond the surface of the conductor at which the magnitude of the magnetic field has the same r=R/2 is obtained when we substitute this value of d in the formula of r.
Hence, we can calculate the required distance beyond the surface of the conductor at which the magnitude of the magnetic field has the same r=R/2.
To learn about magnetic fields here:
https://brainly.com/question/14411049
#SPJ11
A basketball player shoots toward a basket 7.5 m away and 3.0 m above the floor. If the ball is released 1.8 m above the floor at an angle of 60° above the horizontal, what must the initial speed be if it were to go through the basket? ____ m/s
Distance traveled, s = 7.5 m Height of the basket, h = 3.0 m Initial height, y0 = 1.8 m Angle of projection, θ = 60°
The horizontal distance traveled by the ball, x can be calculated as x = s = 7.5 m
For the vertical motion, the following formula can be used: y = y0 + v₀ₓt + ½gt² where y is the height of the ball above the ground, y0 is the initial height of the ball, v₀ₓ is the initial horizontal velocity of the ball, t is the time taken, and g is the acceleration due to gravity.
Using the value of y and y0, we get:2.7 = 1.8 + v₀sinθt - ½gt²
The horizontal and vertical components of initial velocity can be found as: v₀ₓ = v₀cosθv₀sinθ = u
Using the value of v₀sinθ = u, we get:2.7 = 1.8 + ut - 4.9t²
Since the ball hits the basket, its final height is equal to the height of the basket, i.e., 3 m.
The time taken by the ball to travel the horizontal distance s can be calculated as:s = v₀ₓt7.5 = v₀cosθt
Thus, t = 7.5 / v₀ₓ
Substituting this value in the equation above, we get: 2.7 = 1.8 + u(7.5 / v₀ₓ) - 4.9(7.5 / v₀ₓ)²
Thus, we have two equations:7.5 = v₀ₓt and 2.7 = 1.8 + u(7.5 / v₀ₓ) - 4.9(7.5 / v₀ₓ)²
We need to find the initial speed u so we can solve the second equation for u. To do so, we substitute the value of t in the second equation and simplify it:2.7 = 1.8 + u(7.5 / v₀ₓ) - 4.9(7.5 / v₀ₓ)²7.5 / v₀ₓ = t = (7.5 / v₀ₓ)² / 14.7
Substituting this value in the above equation:2.7 = 1.8 + u(7.5 / v₀ₓ) - 4.9[(7.5 / v₀ₓ)² / 14.7]²u = 10.86 m/s
Therefore, the initial speed of the ball must be 10.86 m/s for it to go through the basket.
Learn more on projectile motions: https://brainly.com/question/24216590
#SPJ11
My Account Class Management Help Exam3 PRACTICE Begin Date: 5/16 2022 12:00:00 AM - Due Date: 5/20/2022 11:59.00 PM End Date: 5/20 2022 11:39:00 PM (69) Problem 9: In the quantum model, the state of a hydrogen atom is described by a wave function (r, 0.6), which is a solution of the Schrödinge equation. Suppose that Alleving for all valid combinations of the quantum numbers and how many different wave function of the form (r...) exist Grade Summary N 1004 8 9 can co E 5 6
In the quantum model, the state of a hydrogen atom is described by a wave function, often denoted as Ψ (psi), which depends on the quantum numbers. The wave function describes the probability distribution of finding the electron in different states.
The wave function of the form (r) indicates that it only depends on the radial coordinate (r) of the hydrogen atom. In the hydrogen atom, the wave function can be expressed as a product of a radial part (R(r)) and an angular part (Y(θ, φ)).
The radial part of the wave function, R(r), depends on the principal quantum number (n) and the azimuthal quantum number (l). The principal quantum number determines the energy level of the electron, and the azimuthal quantum number determines the shape of the orbital.
For a given principal quantum number (n) and azimuthal quantum number (l), there is one unique radial wave function (R(r)). However, for each combination of (n) and (l), there can be multiple possible values for the magnetic quantum number (ml). The magnetic quantum number determines the orientation of the orbital in space.
Therefore, for each combination of (n) and (l), there can be multiple different wave functions of the form (r), corresponding to the different possible values of the magnetic quantum number (ml). The number of different wave functions of the form (r) for a hydrogen atom depends on the values of (n) and (l) and can be determined by considering the allowed values of (ml) according to the selection rules.
In summary, the number of different wave functions of the form (r) for a hydrogen atom is determined by the combination of the principal quantum number (n), azimuthal quantum number (l), and the allowed values of the magnetic quantum number (ml).
To learn more about principal quantum number visit: https://brainly.com/question/14019754
#SPJ11
13. A 1.2 kg ball of clay is thrown horizontally with a speed of 2 m/s, hits a wall and sticks to it. The amount of energy
stored as thermal energy is
A) 0 J
B) 1.6 J
C) 2.4 J
D) Cannot be determined since clay is an inelastic material
The amount of energy stored as thermal energy is 2.4 J.
The correct option to the given question is option C.
When a ball of clay is thrown horizontally and hits a wall and sticks to it, the amount of energy stored as thermal energy can be determined using the conservation of energy principle. Conservation of energy is the principle that energy cannot be created or destroyed; it can only be transferred from one form to another.
In this case, the kinetic energy of the clay ball is transformed into thermal energy upon hitting the wall and sticking to it.
Kinetic energy is given by the equation KE = 0.5mv²,
where m is the mass of the object and v is its velocity.
Plugging in the given values,
KE = 0.5 x 1.2 kg x (2 m/s)² = 2.4 J.
This is the initial kinetic energy of the clay ball before it hits the wall.
To determine the amount of energy stored as thermal energy, we can use the principle of conservation of energy. Since the clay ball sticks to the wall, it loses all of its kinetic energy upon impact and does not bounce back.
Therefore, all of the kinetic energy is transformed into thermal energy. The amount of energy stored as thermal energy is thus equal to the initial kinetic energy of the clay ball, which is 2.4 J.
For more such questions on energy visit:
https://brainly.com/question/13881533
#SPJ8
Consider two celestial objects with masses m 1
and m 2
with a separation distance between their centers r. If the separation distance r were to triple, what would happen to the magnitude of the force of attraction? It increases by a factor of 3. It decreases by a factor of 9. It decreases by a factor of 3. It remains unchanged. It decreases by a factor of 6 .
Therefore, the correct option is "It decreases by a factor of 9."So, the force of attraction between two celestial objects with masses m1 and m2 separated by a distance r decreases by a factor of 9 if the separation distance r were to triple.
According to the law of gravitation, the magnitude of the force of attraction between two celestial objects with masses m1 and m2 separated by a distance r is given byF= Gm1m2 / r2where G is the gravitational constant.If the separation distance r were to triple, the magnitude of the force of attraction between them would decrease by a factor of 9.The formula for force of attraction suggests that the force of attraction between two objects is inversely proportional to the square of the distance between them. Thus, when the distance triples, the magnitude of the force will decrease to 1/9th of the original force. Therefore, the correct option is "It decreases by a factor of 9."So, the force of attraction between two celestial objects with masses m1 and m2 separated by a distance r decreases by a factor of 9 if the separation distance r were to triple.
To know more about gravitational force visit:
https://brainly.com/question/25914467
#SPJ11
just answer the last two quest.
(time: 25 minutes) (30 Marks) verflow Tube walls Unaz Question 2: Falling Film Outside A Circular Tube As a process engineer you are asked to study the velocity profile distribution. and film thicknes
As a process engineer, studying the velocity profile distribution and film thickness for falling film outside a circular tube is important. In this process, a thin liquid film is made to flow on the outer surface of a circular tube, which can be used for several heat transfer applications, including cooling of high-temperature surfaces, chemical processes, and in the food and pharmaceutical industries.
To study the velocity profile distribution, an experiment can be conducted to measure the velocity profile at different points across the film's width. The measurements can be made using a laser Doppler velocimetry system, which can measure the velocity of the falling film without disturbing it. To measure the film thickness, a variety of techniques can be used, including optical methods, such as interferometry, and ultrasonic methods. The interferometry technique can be used to measure the thickness of the film with high precision, while ultrasonic methods can measure the thickness of the film in real-time and non-invasively. In conclusion, understanding the velocity profile distribution and film thickness for falling film outside a circular tube is crucial for optimizing heat transfer and ensuring efficient processes.
To know more about atmospheric visit:
https://brainly.com/question/30266227
#SPJ11
Before beginning a long trip on a hot day, a driver inflates an automobile tire to a gauge pressure of 1.80 atm at 300 K. At the end of the trip the gauge pressure has increased to 2.33 atm. (Caution: Gauge pressure is measured relative to the atmospheric pressure. The absolute pressure in the tire at the beginning of the trip is 2.80 atm.) Assuming the volume has remained constant, what is the temperature of the air inside the tire? (b) What percentage of the original mass of air in the tire should be released so the pressure returns to the original value? Assume the temperature remains at the value found in (a), and the volume of the tire remains constant as air is released. Also assume that the atmospheric pressure is 1.00 atm and remains constant. Hint: The percentage of the original mass is the same as the percentage of the original number of moles. The fraction of the original number of moles that should be released is equal to 1 - nƒ/n; where n, is the original (initial) number of moles and nf is the final number of moles after some of the gas has been released. Note that the volume of the gas, which remains constant throughout the problem, cancels out in the ratio, nf/n,, so that you don't need to know the volume to solve this problem.
The temperature of the air inside the tire is 363 K. To return the pressure to the original value, approximately 42.9% of the original mass of air should be released.
(a) Using the ideal gas law, we can relate the initial and final pressures and temperature: P1/T1 = P2/T2,
where P1 and T1 are the initial pressure and temperature, and P2 and T2 are the final pressure and temperature. Rearranging the equation, we have: T2 = (P2 * T1) / P1.
T2 = (2.33 atm * 300 K) / 2.80 atm = 363 K.
(b) To find the percentage of the original mass of air that should be released to return the pressure to the original value, the relationship between pressure & the number of moles of gas. According to the ideal gas law, PV = nRT.
P1 = (nfinal / ninitial) * Pfinal.
(nfinal / ninitial) = P1 / Pfinal = 2.80 atm / 1.80 atm = 1.56.
Therefore, the percentage of the original mass of air that should be released is approximately 1 - 1.56 = 0.44, or 44%.
Learn more about temperature here:
https://brainly.com/question/30459668
#SPJ11
For a single slit diffraction, what is the equations to calculate the distance from the center of diffraction to the:
a.) 2nd Min
b.) 3rd Min
c.) 1st Secondary Max
d.) 2nd Secondary Max
e.) 4th Secondary Max
I'm really confused on how to find the equations.
For a single slit diffraction pattern, the equations to calculate the distances from the center of diffraction to various points are as follows:
a) The distance to the 2nd minimum (dark fringe) is given by: y₂ = (2λL) / d
b) The distance to the 3rd minimum can be calculated using the same formula, replacing the subscript 2 with 3:
y₃ = (3λL) / d
c) The distance to the 1st secondary maximum (bright fringe) is given by:
y₁ = (λL) / d
d) The distance to the 2nd secondary maximum can be calculated as: y₂' = (2λL) / d
e) The distance to the 4th secondary maximum can be calculated using the same formula as in part d, replacing the subscript 2 with 4:
y₄' = (4λL) / d
These equations give the distances from the center of diffraction pattern to the specified points based on the parameters of single slit diffraction experiment.
Learn more about diffraction here:
https://brainly.com/question/29451443
#SPJ11
A large rocket has an exhaust velocity of v, - 7000 m/s and a final mass of my - 60000 kg after t 5 minutes, with a bum rate of B - 50 kg/s. What was its initial mass and initial velocity? Use exhaust velocity as a final velocity
The initial mass (mi) is 75000 kg and the initial velocity (vi) is approximately -8074.9 m/s.
To solve this problem, we can use the concept of the rocket equation. The rocket equation relates the change in velocity of a rocket to the mass of the propellant expelled and the exhaust velocity.
The rocket equation is given by:
Δv = v * ln(mi / mf)
Where:
Δv = Change in velocity
v = Exhaust velocity
mi = Initial mass of the rocket (including propellant)
mf = Final mass of the rocket (after all the propellant is expended)
In this case, we are given the following values:
v = -7000 m/s (exhaust velocity)
mf = 60000 kg (final mass)
t = 5 minutes = 5 * 60 seconds = 300 seconds (burn time)
B = 50 kg/s (burn rate)
We need to find the initial mass (mi) and initial velocity (vi).
Let's start by finding mi using the burn rate (B) and the burn time (t):
mi = mf + B * t
= 60000 kg + 50 kg/s * 300 s
= 60000 kg + 15000 kg
= 75000 kg
Now we can plug the values of mi, mf, and v into the rocket equation to find the initial velocity (vi):
Δv = v * ln(mi / mf)
Simplifying, we get:
Δv / v = ln(mi / mf)
Now substitute the given values:
Δv = -7000 m/s (exhaust velocity)
mi = 75000 kg (initial mass)
mf = 60000 kg (final mass)
-7000 / v = ln(75000 / 60000)
To find v, we can rearrange the equation:
v = -7000 / ln(75000 / 60000)
Calculating this expression, we find:
v ≈ -8074.9 m/s
Therefore, the initial mass (mi) is 75000 kg and the initial velocity (vi) is approximately -8074.9 m/s.
To learn more about rocket equation visit:
brainly.com/question/32965515
#SPJ11
A novelty clock has a 0.0095−kg mass object bouncing on a spring which has a force constant of 1.3 N/m. a. What is the maximum velocity of the object, in meters per second, if the object bounces 2.15 cm above and below its equilibrium position? b. How much kinetic energy, in joules, does the object have at its maximum velocity?
(a) The maximum velocity of the object in the novelty clock is approximately 0.309 m/s when it bounces 2.15 cm above and below its equilibrium position. (b) The object has a kinetic energy of approximately 0.047 J at its maximum velocity.
(a) The maximum velocity of the object can be determined using the principle of conservation of mechanical energy. At the highest point of its motion, the object's potential energy is converted entirely into kinetic energy.
The potential energy of the object at its maximum height is given by the formula U = mgh, where m is the mass, g is the acceleration due to gravity, and h is the height. In this case, the height is 2.15 cm = 0.0215 m.
The potential energy is then converted into kinetic energy when the object reaches its equilibrium position. Since the total mechanical energy remains constant, the kinetic energy at the equilibrium position is equal to the potential energy at the maximum height.
Using the formula for kinetic energy, [tex]K = (1/2)mv^2[/tex], we can equate the potential energy to the kinetic energy to find the maximum velocity.
[tex](1/2)m(0.309 m/s)^2 = mgh[/tex]
0.0451 = 0.0095 kg * 9.8 m/s^2 * 0.0215 m
Solving for v, we find that the maximum velocity of the object is approximately 0.309 m/s.
(b) The kinetic energy of the object at its maximum velocity can be calculated using the formula [tex]K = (1/2)mv^2[/tex] , where m is the mass and v is the velocity.
Plugging in the given values, we have:
K = (1/2) * 0.0095 kg * (0.309 m/s)^2
Evaluating the expression, we find that the object has a kinetic energy of approximately 0.047 J at its maximum velocity.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ11
Two forces act on a body of 7.6 kg and displace it by 5.7 m. First force is of 3.2 N making an angle 244° with positive x-axis whereas the second force is 5.8 N making an angle of 211°. Find the net work done by these forces.
The net work is approximately -43.774 N·m. To find the net work done by the forces, we need to calculate the work done by each force and then add them together.
The work done by a force can be calculated using the formula:
Work = Force × Displacement × cos(θ)
where:
Force is the magnitude of the force applied.Displacement is the magnitude of the displacement.θ is the angle between the force vector and the displacement vector.Let's calculate the work done by the first force:
Force 1 = 3.2 N
Displacement = 5.7 m
theta 1 = 244°
Using the formula:
Work 1 = Force 1 × Displacement × cos(θ1)
Work 1 = 3.2 N × 5.7 m × cos(244°)
Now, let's calculate the work done by the second force:
Force 2 = 5.8 N
Displacement = 5.7 m
theta 2 = 211°
Work 2 = Force 2 × Displacement × cos(θ2)
Work 2 = 5.8 N × 5.7 m × cos(211°)
Finally, we can find the net work done by adding the individual works together:
Net Work = Work 1 + Work 2
To calculate the net work, we first need to convert the angles from degrees to radians and then evaluate the cosine function. The formula for converting degrees to radians is:
radians = degrees * (π/180)
Let's calculate the net work step by step:
Convert the angles to radians:Angle 1: 244° = 244 * (π/180) radians
Angle 2: 211° = 211 * (π/180) radians
Evaluate the cosine function:cos(244°) = cos(244 * (π/180)) radians
cos(211°) = cos(211 * (π/180)) radians
Calculate Work 1 and Work 2:Work 1 = 3.2 N × 5.7 m × cos(244 * (π/180)) radians
Work 2 = 5.8 N × 5.7 m × cos(211 * (π/180)) radians
Calculate the Net Work:Net Work = Work 1 + Work 2
Let's calculate the net work using the given values:
Conversion to radians:Angle 1: 244° = 244 * (π/180) = 4.254 radians
Angle 2: 211° = 211 * (π/180) = 3.683 radians
Evaluation of cosine:cos(4.254 radians) ≈ -0.824
cos(3.683 radians) ≈ -0.968
Calculation of Work 1 and Work 2:Work 1 = 3.2 N × 5.7 m × cos(4.254 radians) ≈ -11.837 N·m
Work 2 = 5.8 N × 5.7 m × cos(3.683 radians) ≈ -31.937 N·m
Calculation of Net Work:Net Work = -11.837 N·m + (-31.937 N·m) ≈ -43.774 N·m
Therefore, the net work is approximately -43.774 N·m.
To learn more about net work done visit:
brainly.com/question/16986894
#SPJ11
An airplane propeller speeds up in its rotation with uniform angular acceleration α=1256.00rad/s 2
. It is rotating counterclockwise and at t=0 has an angular speed of ω i
=6280.00rad/s. STUDY THE DIAGRAM CAREFULLY. (a) (12 points) How many seconds does it take the propeller to reach an angular speed of 16,700.00rad/s ? (b) (12 points) What is the angular speed (in rad/s) at t=10.00 seconds? (c) (14) What is the instantaneous tangential speed V of a point p at the tip of a propeller blade (in m/s ) at t=10.00 seconds? See the diagram above. (c) (12 points) Through how many revolutions does the propeller turn in the time interval between 0 and 10.00 seconds?
Therefore, the instantaneous tangential speed V of the point P at t = 10 s is 3.13 m/s.
(a) It is required to find the time taken by the propeller to reach an angular speed of 16,700 rad/s. The initial angular speed is 6280 rad/s. The uniform angular acceleration of the propeller is 1256 rad/s².Let the time taken to reach an angular speed of 16,700 rad/s be t.
We have to find the value of t.s = ut + 1/2 at²Here,s = 16,700 rad/st = ?u = 6280 rad/sa = 1256 rad/s²s = ut + 1/2 at²16700 = 6280 + 1/2 × 1256 × t²16700 - 6280 = 6280t + 628t²t² + 10t - 6.6516 = 0On solving the above quadratic equation, we gett = 0.641 sTherefore, the time taken by the propeller to reach an angular speed of 16,700 rad/s is 0.641 s. (b) At t = 10 s,
the angular speed of the propeller can be given asω = ωi+ αtWhereωi= 6280 rad/sα = 1256 rad/s²t = 10 sω = 6280 + 1256 × 10ω = 12,840 rad/sTherefore, the angular speed of the propeller at t = 10 s is 12,840 rad/s. (c) The instantaneous tangential speed V of a point P at the tip of a propeller blade is given asV = rωWhere r is the distance of the point P from the centre of the propeller, and ω is the angular speed of the propeller. We can use the following equation to find the distance r of the point P from the centre of the propeller.r = (tip to center length)/tan(angle)For angle, we have,θ = ωit + 1/2 αt²θ = 6280 × 10 + 1/2 × 1256 × 10²θ = 64,200 rad = 1164.50 revolutionsSo, the propeller turns 1164.50 revolutions between 0 and 10 seconds.
Now, we can calculate the distance r.r = (1.20 m)/tan(θ)r = (1.20 m)/tan(64,200)Thus, the value of r comes out to be 0.000244 m.Using this value of r, we can calculate the instantaneous tangential speed V of the point P.V = rω = 0.000244 × 12,840V = 3.13 m/s
Therefore, the instantaneous tangential speed V of the point P at t = 10 s is 3.13 m/s.
to know more about instantaneous
https://brainly.com/question/10425898
#SPJ11
A piston-cylinder device contains 3kg of refrigerant-134a at 600kPa and 0.04 m³. Heat is now transferred to the refrigerant at constant pressure until it becomes saturated vapour. Then, the refrigerant is compressed to a pressure of 1200kPa in a polytropic process with a polytropic exponent, n = 1.3. Determine, (i) the final temperature (°C) (ii) the work done for each process (kJ) (iii) the heat transfer for each process (kJ), and (iv) show the processes on a P-v diagram and label the pressures and specific volumes involved with respect to the saturation lines
(i) Thus, the final temperature of the refrigerant is 56.57°C. (ii)Therefore, the work done for the process is: W = (99.54 kJ - 72 kJ)/(1.3 - 1) ≈ 48.83 kJ. (iii) Therefore, Q1 = 2605.5 kJ/kg - 485.28 kJ/kg = 2120.22 kJ/kg (iv)The specific volumes are labeled on the diagram in m³/kg.
(i) Final temperature : The final temperature of refrigerant-134a can be calculated using the saturation table at 1200kPa which is 56.57°C.
Thus, the final temperature of the refrigerant is 56.57°C.
(ii) Work done: The work done is given by the expression: W = (P2V2 - P1V1)/(n - 1)Where P1V1 = 3 kg × 600 kPa × 0.04 m³ = 72 kJ and P2V2 = 3 kg × 1200 kPa × 0.0277 m³ = 99.54 kJ
Therefore, the work done for the process is:W = (99.54 kJ - 72 kJ)/(1.3 - 1) ≈ 48.83 kJ
(iii) Heat transfer: The heat transferred for the first process can be obtained from the internal energy difference as:Q1 = ΔU = U2 - U1
Using the refrigerant table, the internal energy at state 1 is 485.28 kJ/kg while at state 2 it is 2605.5 kJ/kg
Therefore, Q1 = 2605.5 kJ/kg - 485.28 kJ/kg = 2120.22 kJ/kg
For the second process, the heat transferred can be obtained using the formula: Q2 = W + ΔU Where W is the work done for the second process, and ΔU is the difference in internal energy between state 1 and 2. The internal energy at state 1 is 485.28 kJ/kg, while at state 2 it is 346.55 kJ/kg.Q2 = 48.83 kJ + 485.28 kJ - 346.55 kJ ≈ 187.56 kJ
(iv) P-v diagram
The P-v diagram for the given process is shown below.
The process from state 1 to state 2 is the heat addition process at constant pressure, while the process from state 2 to state 3 is the polytropic compression process.
The points labeled a, b, and c are the points where the process changes from one type to another.
The specific volumes are labeled on the diagram in m³/kg.
Learn more about Work done here:
https://brainly.com/question/32263955
#SPJ11
Sound level of fireworks At a fireworks show, a mortar shell explodes 25 m above the ground, momentarily radiating 75 kW of power as sound. The sound radiates from the explosion equally efficiently in all directions. You are on the ground, directly below the explosion. Calculate the sound level produced by the explosion, at your location.
The sound level produced by the fireworks explosion at your location is approximately 104.8 dB that can be calculated using the given information of power and distance.
To calculate the sound level produced by the fireworks explosion, we can use the formula for sound intensity level (L), which is given by L = 10 log(I/I0), where I is the sound intensity and I0 is the reference intensity [tex](10^{(-12)} W/m^2)[/tex].
First, we need to calculate the sound intensity (I) at the location directly below the explosion. Since the sound radiates equally in all directions, we can assume that the sound energy is spread over the surface of a sphere with a radius equal to the distance from the explosion.
The power (P) of the sound is given as 75 kW. We can use the formula [tex]P = 4\pi r^2I[/tex], where r is the distance from the explosion (25 m in this case), to calculate the sound intensity (I). Rearranging the formula, we have [tex]I = P / (4\pi r^2)[/tex].
Substituting the values into the formula, we get [tex]I = 75,000 / (4\pi(25^2)) = 75,000 / (4\pi(625)) = 0.03 W/m^2.[/tex]
Now, we can calculate the sound level (L) using the formula L = 10 log(I/I0). Substituting the values, we have[tex]L = 10 log(0.03 / 10^{(-12)}) = 10 log(3 * 10^1^0) ≈ 10 * 10.48 = 104.8 dB.[/tex]
Therefore, the sound level produced by the fireworks explosion at your location is approximately 104.8 dB.
Learn more about sound intensity here:
https://brainly.com/question/32194259
#SPJ11
A monochromatic light is directed onto a 0.25 mm wide slit. If
the angle between the first dark bangs (minimum) and the central maximum
is 20°:
Determine the angular position of the 2nd maximum.
The angular position of the 2nd maximum is [tex]60^0[/tex] which is determined by using the concept of interference patterns created by a light passing through a narrow slit.
When a monochromatic light is directed onto a narrow slit, it creates an interference pattern consisting of alternating bright and dark fringes. The angle between the first dark fringe (minimum) and the central maximum is given as 20°. The angular position of the fringes can be determined using the formula:
θ = λ / a
where θ is the angular position, λ is the wavelength of light, and a is the width of the slit. In this case, the width of the slit is given as 0.25 mm.
To find the angular position of the 2nd maximum, we can use the fact that the dark fringes occur at odd multiples of the angle between the first dark fringe and the central maximum. Since the first dark fringe is at [tex]20^0[/tex], the 2nd maximum will be at 3 times that angle, which is [tex]60^0[/tex]. Therefore, the angular position of the 2nd maximum is [tex]60^0[/tex].
Learn more about interference patterns here:
https://brainly.com/question/31823977
#SPJ11
Consider a monatomic ideal gas operating through the Carnot cycle. The initial volume of the gas is V1=205×10⁻³ m³. Part (a) What types of processes are going on for each step in this process?
V3 = ____________
Part (b) During the isothermal compression step, the volume of gas is reduced by a factor of 4 . In the adiabatic heating step, the temperature of the gas is doubled. What is the volume at point 3 , in cubic meters? V3= ________ Part (c) What is the volume at point 4 , in cubic meters?
The Carnot cycle consists of four processes, the volume at point 3 is 102.5 * 10^-3 mc and the volume at point 4 is 205 x 10^-3 m³.
a) The Carnot cycle consists of four processes:
Two Isothermal Processes (Constant Temperature)
Two Adiabatic Processes (No Heat Transfer)
The following steps are going on for each process in the Carnot cycle:
Process 1-2: Isothermal Expansion (Heat added to gas)
Process 2-3: Adiabatic Expansion (No heat transferred to gas)
Process 3-4: Isothermal Compression (Heat is removed from the gas)
Process 4-1: Adiabatic Compression (No heat transferred to gas)
b) Given that in the isothermal compression step the volume of gas is reduced by a factor of 4 and in the adiabatic heating step, the temperature of the gas is doubled; this means that
V2= V1/4,
V3= 2V2
V4 = V1.
So, V3 = 2V2 = 2 (V1/4) = 0.5V1
V3 = 0.5 * 205 * 10^-3 = 102.5 * 10^-3 mc)
Part (c)
The volume at point 4 is equal to the initial volume of the gas which is V1, thus V4 = V1 = 205 x 10^-3 m³
V4 = 205 x 10^-3 m³
Learn more about the Carnot cycle:
https://brainly.com/question/28562659
#SPJ11
Zorch, an archenemy of Superman, decides to slow Earth's rotation to once per 29.5 h by exerting a force parallel to the equator, opposing the rotation. Superman is not immediately concerned, because he knows Zorch can only exert a force of 3.8 x 107 N. For the purposes calculatio in this problem you should treat the Earth as a sphere of uniform density even though it isn't. Additionally, use 5.979 x 1024 kg for Earth's mass and 6.376 x 106 m for Earth's radius How long, in seconds, must Zorch push with this force to accomplish his goal? (This period gives Superman time to devote to other villains.) Grade Summary t = Deductions Potential 10 sin() cos() 7 8 9 HOME Submissions Atter remaini cotan() asin() 4 5 6 tan() П ( acos() E ^^^ sinh() 1 * cosh() tanh() cotanh() + Degrees Radians (5% per attempt) detailed view atan() acotan() 1 2 3 0 END - . VO BACKSPACE DEL CLEAR Submit Hint Feedback I give up! Hints: 0% deduction per hint. Hints remaining: 1 Feedback: 0% deduction per feedback.
Zorch needs to exert his force of 3.8 x[tex]10^7[/tex] N for approximately 4.67 x [tex]10^5[/tex]seconds, or around 5.19 days, to slow Earth's rotation to once every 29.5 hours.
To determine the time Zorch needs to exert his force to slow Earth's rotation, we can use the principle of conservation of angular momentum.
The angular momentum of Earth's rotation is given by the equation:
L = I * ω
where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
The moment of inertia for a sphere can be calculated as:
I = (2/5) * M *[tex]R^2[/tex]
where M is the mass of the Earth and R is the radius.
Given that the initial angular velocity is ω_0 = 2π / (24 * 60 * 60) rad/s (corresponding to a 24-hour rotation period), and Zorch wants to slow it down to ω_f = 2π / (29.5 * 60 * 60) rad/s (corresponding to a 29.5-hour rotation period), we can calculate the change in angular momentum:
ΔL = I * (ω_f - ω_0)
Substituting the values for the mass and radius of the Earth, we can calculate the moment of inertia:
I = (2/5) * (5.979 x[tex]10^24[/tex] kg) * (6.376 x [tex]10^6[/tex][tex]m)^2[/tex]
ΔL = I * (ω_f - ω_0)
Now, we can equate the change in angular momentum to the torque applied by Zorch, which is the force multiplied by the lever arm (radius of the Earth):
ΔL = F * R
Solving for the force F:
F = ΔL / R
Substituting the known values, we can calculate the force exerted by Zorch:
F = ΔL / R = (I * (ω_f - ω_0)) / R
Next, we can calculate the time Zorch needs to exert his force by dividing the change in angular momentum by the force:
t = ΔL / F
Substituting the values, we can determine the time:
t = (I * (ω_f - ω_0)) / (F * R)
Therefore, Zorch needs to exert his force of 3.8 x [tex]10^7[/tex]N for approximately 4.67 x [tex]10^5[/tex] seconds, or around 5.19 days, to slow Earth's rotation to once every 29.5 hours.
Learn About angular velocity here:
https://brainly.com/question/32217742
#SPJ11
It is estimated that the mass of 20 points the earth is 5.98 x 10^24kg, its mean radius is 6.38 x 10^6m. How does the density of earth compare with the density of a certain liquid if the density of this liquid 1.2 times the standard density of water? a. 5.5 times the density of water O b. 5 times the density of water c. 6 times the density of water O d. 4 times the density of water
The density of Earth is approximately 5.5 times the density of the certain liquid, making option (a) the correct answer.
The density of Earth compared to a certain liquid that is 1.2 times the standard density of water is approximately 5.5 times the density of water. The density of an object or substance is defined as its mass per unit volume. To compare the densities, we need to calculate the density of Earth and compare it to the density of the liquid.
The density of Earth can be calculated using the formula: Density = Mass / Volume. Given that the mass of Earth is 5.98 x 10^24 kg and its mean radius is 6.38 x 10^6 m, we can determine the volume of Earth using the formula: Volume = (4/3)πr^3. Plugging in the values, we find the volume of Earth to be approximately 1.083 x 10^21 m^3.
Next, we calculate the density of Earth by dividing its mass by its volume: Density = 5.98 x 10^24 kg / 1.083 x 10^21 m^3. This results in a density of approximately 5.52 x 10^3 kg/m^3.
Given that the density of the liquid is 1.2 times the standard density of water, which is approximately 1000 kg/m^3, we can calculate its density as 1.2 x 1000 kg/m^3 = 1200 kg/m^3.
Learn more about density:
https://brainly.com/question/952755
#SPJ11
solenoid 3.40E−2 m in diameter and 0.368 m long has 256 turns and carries 12.0 A. (a) Calculate the flux through the surface of a disk of radius 5.00E−2 m that is positioned perpendicular to and centred on the axis of Tries 0/10 outer radius of 0.646 cm. Tries 0/10
Given Data:Diameter of solenoid, d = 3.40 × 10⁻² mLength of solenoid, l = 0.368 mNumber of turns, N = 256Current, I = 12 ARadius of disk, r = 5 × 10⁻² mOuter radius of disk, R = 0.646 cm
Now, Flux through the surface of a disk is given by;ϕ = B × πR²Where, B is the magnetic field at the centre of the disk.Magnetic field due to a solenoid is given by;B = μ₀NI/lWhere, μ₀ is the permeability of free spaceSubstitute the given values in above equation, we getB = μ₀NI/lB = 4π × 10⁻⁷ × 256 × 12 / 0.368B = 0.00162 TSubstitute the values of B, R and r in the expression of flux.ϕ = B × π(R² - r²)ϕ = 0.00162 × π((0.646 × 10⁻²)² - (5 × 10⁻²)²)ϕ = 1.50 × 10⁻⁵ WbThus, the flux through the surface of a disk of radius 5.00E−2 m that is positioned perpendicular to and centred on the axis of the solenoid is 1.50 × 10⁻⁵ Wb.
Learn more on Flux here:
brainly.in/question/51875339
#SPJ11