The torque required to create an
angular acceleration
on a disk is determined by its radius and mass. The formula for torque is τ = Iα, where τ is torque, I is the moment of inertia of the disk, and α is the angular acceleration.
The moment of inertia for a solid disk rotating about its central axis is (1/2)mr², where m is the mass of the disk and r is its radius.
Given the
radius and mass
of the disk, we can calculate its moment of inertia as: I = (1/2)mr² = (1/2)(20 kg)(0.2 m)² = 0.4 kg·m². Substituting the moment of inertia and angular acceleration into the torque formula, we get: τ = Iα = (0.4 kg·m²)(4 rad/s²) = 1.6 N·m. Therefore, the torque that must be exerted on the disk is 1.6 N·m to create an angular acceleration of 4 rad/s².
to know more about
angular acceleration
pls visit-
https://brainly.com/question/30237820
#SPJ11
A plunger cylinder device initially contains 0.10 kg of saturated steam at 5 bar. Through a valve, initially closed, the cylinder is connected to a line through which steam at 10 bar and 500°C circulates. In a process that is maintained at constant pressure by the weight of the plunger, steam enters the cylinder until its contents reach 300°C, while simultaneously 90 kJ of heat is lost through the cylinder walls. Determine the amount of mass in kg of steam entering the cylinder.
Consider that 1 bar = 100 kPa
The value of the mass in kg of steam entering the cylinder is 0.0407 kg.
The mass in kg of steam entering the cylinder is 0.0407 kg.
Let m be the mass of the steam entering the cylinder. The specific volume of steam at 5 bar and 300°C is given as follows:v = 0.0642 m^3/kg
Using the formula of internal energy, we can find that:u = 2966 kJ/kg
The initial internal energy of the steam in the cylinder is given as follows:
u1 = hf + x1 hfg
u1 = 1430.8 + 0.9886 × 2599.1
u1 = 4017.6 kJ/kg
The final internal energy of the steam in the cylinder is given as follows:
u2 = hf + x2 hfg
u2 = 102.2 + 0.7917 × 2497.5
u2 = 1988.6 kJ/kg
Heat loss from the cylinder, Q = 90 kJ
We can use the first law of thermodynamics, which states that:Q = m(u2 - u1) - work done by steam
The work done by steam is negligible in the process as it is maintained at constant pressure. Thus, the equation becomes:
Q = m(u2 - u1)
0.0407 (1988.6 - 4017.6) = -90m = 0.0407 kg
Learn more about cylinder at
https://brainly.com/question/16290574
#SPJ11
Write a question that calculates the pressure of a container of gas whose temperature increases from 140 Kelvin to 400 Kelvin, and the pressure if that container then increases to three times its original volume. Draw out a sketch, and then answer it.
The pressure of the gas in the container can be calculated using the ideal gas law equation: P1 * V1 / T1 = P2 * V2 / T2.
To calculate the pressure of the gas in the container, we can use the ideal gas law equation, which relates pressure (P), volume (V), and temperature (T) of a gas. The ideal gas law equation is written as P1 * V1 / T1 = P2 * V2 / T2, where P1 and T1 are the initial pressure and temperature, V1 is the initial volume, P2 is the final pressure, T2 is the final temperature, and V2 is the final volume.
In the given question, the temperature increases from 140 Kelvin to 400 Kelvin. Let's assume the initial pressure is P1 and the initial volume is V1. Since only the temperature changes, we can set P2 and V2 as unknown variables. We are given that the container then increases to three times its original volume, which means V2 = 3V1.
Substituting the given values and variables into the ideal gas law equation, we get P1 * V1 / 140 = P2 * (3V1) / 400. Simplifying this equation, we find that P2 = (3 * 400 * P1) / (140).
Therefore, the pressure of the container of gas after the temperature increase and volume change can be calculated by multiplying the initial pressure by (3 * 400) / 140.
Learn more about Gas
brainly.com/question/14812509
#SPJ11
Given the following values:
Tube 1
radius 1= 40 mm
mass 1= 250 g
Tube 2
radius 2= 30 mm
mass 2= 200 g
Density of fluid= 1 g/cm3
Find h1 and h2
Given,Radius of the tube 1 = 40 mmRadius of the tube 2 = 30 mmMass of the tube 1 = 250 gMass of the tube 2 = 200 gDensity of fluid = 1 g/cm³The formula to calculate h₁ and h₂ is as follows: Pressure at A + 1/2 ρv₁² + ρgh₁ = Pressure at B + 1/2 ρv₂² + ρgh₂As the fluid in the tubes is at rest, the velocity of the fluid at point A and point B is zero.v₁ = v₂ = 0
Hence the above equation reduces to,Pressure at A + ρgh₁ = Pressure at B + ρgh₂Let’s calculate the pressure at A and pressure at B as follows:Pressure at A = 0Pa (Atmospheric pressure)Pressure at B = ρghIn order to calculate h, we need to equate the pressure at A and B. Hence,ρgh₁ = ρgh₂g and ρ are common on both sides of the equation. They can be cancelled.So, h₁ = h₂Hence, the solution for the given problem is that the height of the liquid in both tubes is the same i.e. h₁ = h₂.
To know more about calculate visit:
https://brainly.com/question/30151794
#SPJ11
A 20-turn circular coil of wire lies in the plane perpendicular to a magnetic field. The circular coil has a radius of 0.20 m. The wire has a radius of 1 mm and a resistivity of p=20x10-89 m. The magnitude of the magnetic field is by B(C) = 8 - V. Find the current induced in the wire when the magnetic field is zero
The current induced in the wire when the magnetic field is zero is 0.08 A.
When a coil of wire is exposed to a changing magnetic field, an electromotive force (EMF) is induced, which in turn causes a current to flow through the wire. This phenomenon is described by Faraday's law of electromagnetic induction. According to Faraday's law, the magnitude of the induced EMF is given by the rate of change of magnetic flux through the coil.
In this case, the magnitude of the induced EMF can be expressed as E = -dΦ/dt, where E is the induced EMF, Φ is the magnetic flux, and t is time. Since the magnetic field is given by B(C) = 8 - V, when the magnetic field is zero, V = 8.
The magnetic flux through a circular coil is given by Φ = B * A, where B is the magnetic field and A is the area of the coil. The area of the coil can be calculated as A = π * r^2, where r is the radius of the coil.
Substituting the values, the induced EMF becomes E = -d(Φ)/dt = -d(B * A)/dt = -B * d(A)/dt. As the magnetic field is zero, the rate of change of area becomes d(A)/dt = π * (2r * dr)/dt = π * (2 * 0.20 * 0.001)/dt = 0.0004π/dt.
Since the induced EMF is given by E = -B * d(A)/dt, and B = 8 when the magnetic field is zero, we have E = -8 * 0.0004π/dt. To find the current induced in the wire, we use Ohm's law, which states that I = E/R, where I is the current, E is the induced EMF, and R is the resistance.
The resistance of the wire can be calculated using the formula R = (p * L) / A, where p is the resistivity of the wire, L is the length of the wire, and A is the cross-sectional area of the wire.
Substituting the given values, R = (20x10^-8 Ωm * 2π * 0.20 m) / (π * (0.001 m)^2) = 0.08 Ω.
Finally, substituting the values of E and R into Ohm's law, we have I = E / R = (-8 * 0.0004π/dt) / 0.08 = -0.01/dt.
The magnitude of the current induced in the wire when the magnetic field is zero is therefore 0.01 A, or 0.08 A when rounded to two decimal places.
learn more about "current ":- https://brainly.com/question/1100341
#SPJ11
Please write down enough detail to demonstrate your understanding and explain it. Eric posts a timelapse video of the very large pressure chamber he built for fun. Inside the chamber, he puts an unusually large balloon with helium inside which he says is a 2.40-mol sample. The chamber is in his basement which stays at a steady 290K, which includes the inside of the chamber. He can very slowly adjust the pressure of the chamber, which means the pressure inside the balloon is approximately the same pressure. The time lapse starts with the display showing a pressure of 0.400 atm is compressed slowly enough to assume it is isothermal until it reaches 1.00 atm. In these conditions you can assume the helium behaves as an ideal gas.
(a) Find the final volume of the balloon.
m3
(b) Find the work done on the gas. Enter as a positive number. (note the units here!).
kJ
(c) Find the energy transferred by heat. Be aware of the units! Use a positive number if heat is absorbed by the balloon, and a negative number if heat is released by the balloon.
kJ
(d) Extra Credit: How many grams of helium are in the balloon?
grams
The final volume of the balloon is 18.2 L. the work done on the gas. Enter as a positive number is -1.55 kJ. the energy transferred by heat is -1.55 kJ. Grams in Helium are in the balloon is 9.6 g.
(a) The final volume of the balloon is to be determined. Initial volume, V₁ = (2.40 mol x 8.31 J K⁻¹ mol⁻¹ x 290 K)/0.400 atm = 45.5 LFinal pressure, P₂ = 1.00 atm Initial pressure, P₁ = 0.400 atm According to Boyle’s law:P₁V₁ = P₂V₂V₂ = P₁V₁/P₂ = (0.400 atm x 45.5 L)/1.00 atmV₂ = 18.2 L
(b) The work done on the gas is to be determined. The process is isothermal, and for this case, the work done on the gas is given by:W = nRT ln(V₂/V₁)W = (2.40 mol x 8.31 J K⁻¹ mol⁻¹ x 290 K) ln (18.2/45.5)W = -1552 J = -1.55 kJ Therefore, the work done on the gas is -1.55 kJ
(c) The energy transferred by heat is to be determined. For an isothermal process, the heat transferred is equal to the work done. Therefore, the energy transferred by heat is -1.55 kJ.
(d) The mass of the helium in the balloon is to be determined. Molar mass of helium, M = 4.00 g/mol Number of moles, n = 2.40 molMass of helium, m = nM = 2.40 mol x 4.00 g/mol = 9.6 g Therefore, there are 9.6 g of helium in the balloon.
To know more about Helium refer here:
https://brainly.com/question/5596460#
#SPJ11
Jane goes out for a run. She runs 10 miles West for 2 hours, then she stops suddenly and turns and runs North for 30 minutes while speeding up at a rate of 4.0×10 ^−3 [ m/s 2
]. She stops again, then runs with constant velocity of 5[ m/s] at 40 degrees North of East for 5 miles. HINT: you MUST draw a picture and choose a vector basis. a) Convert all quantities given to SI units. Must show work! b) Write out the displacement vector for each leg of the trip in vector notation. c) Find Jane's average velocity for the entire run. d) Find Jane's average speed for the entire run.
c) Jane's average velocity for the entire run cannot be determined without the values of the angle and acceleration for the Northward leg.
d) Jane's average speed for the entire run is the total distance traveled (16093.4 + 8046.7) meters divided by the total time taken (7200 + 1800) seconds.
a) Converting the given quantities to SI units:
1 mile = 1609.34 meters
10 miles = 10 * 1609.34 meters = 16093.4 meters
2 hours = 2 * 3600 seconds = 7200 seconds
30 minutes = 30 * 60 seconds = 1800 seconds
5 miles = 5 * 1609.34 meters = 8046.7 meters
b) Displacement vectors for each leg of the trip:
1. Westward leg: Displacement vector = -16093.4 meters * i (since it is in the West direction)
2. Northward leg: Displacement vector = (30 minutes * 60 seconds * 5.0 x 10^-3 m/s^2 * (0.5 * 1800 seconds)^2) * j (since it is in the North direction and speeding up)
3. Eastward leg: Displacement vector = 8046.7 meters * cos(40 degrees) * i + 8046.7 meters * sin(40 degrees) * j (since it is at an angle of 40 degrees North of East)
c) Jane's average velocity for the entire run:
To find the average velocity, we need to calculate the total displacement and divide it by the total time.
Total displacement = Sum of individual displacement vectors
Total time = Sum of individual time intervals
Average velocity = Total displacement / Total time
d) Jane's average speed for the entire run:
Average speed = Total distance / Total time
Note: Average velocity considers both the magnitude and direction of motion, while average speed only considers the magnitude.
Please calculate the values for parts c) and d) using the provided information and formulas.
learn more about "acceleration ":- https://brainly.com/question/460763
#SPJ11
equipotentials. In a region (xy plane), the potential between x=0 and x=6.00 m satisfies the equation V =a+bx where a=10.0 V and b=+7.00 V/m. Determine:
a) the electric potential at x=0, x=3.00 m and x=6.00 m.
b) the magnitude and direction of the electric field at x=0, x=3.00 m and x=6.00 m. Use the relationship ⃗ E=−∇⃗ V which in one dimension corresponds to Ex=−dV/dx.
c) Make a drawing of some equipotentials in the xy plane and of the field lines in the xy plane in the region between x=0 and x=6.00 m.
d) If a positive charge of value 1.0 μC and mass 4.0 g is released from rest at x=3.00, calculate the speed it attains in advancing a distance of 3.00 m. Between which points does it move?
The electric potential is - 7.00 V/m. the magnitude of the electric field at x = 0, x = 3.00 m, and x = 6.00 m is 7.00 V/m.The change in its potential energy is 2.10 × 10-5 J.The charged particle moves between x = 3.00 m and x = 6.00 m.
To determine the electric potential at x = 0, x = 3.00 m and x = 6.00 m, substitute the given values of a, b, and x in the equation V = a + bx. Here's how to compute it:
For x = 0, V = 10.0 V,For x = 3.00 m, V = a + bx
10.0 + (7.00 V/m)(3.00 m) = 31.0 V.
For x = 6.00 m, V = a + bx
10.0 + (7.00 V/m)(6.00 m) = 52.0 V
To determine the magnitude and direction of the electric field at x = 0, x = 3.00 m, and x = 6.00 m, use the relationship ⃗E = −V, which in one dimension corresponds to Ex=−dV/dx. Thus:For x = 0,E = - dV/dx|0
- (7.00 V/m) = - 7.00 V/m,
pointing in the negative x-direction.
For x = 3.00 m,E = - dV/dx|3
- (7.00 V/m) = - 7.00 V/m ,
pointing in the negative x-directionFor x = 6.00 m,E = - dV/dx|6 = - (7.00 V/m) = - 7.00 V/m pointing in the negative x-direction.
Therefore, the magnitude of the electric field at x = 0, x = 3.00 m, and x = 6.00 m is 7.00 V/m, and it points in the negative x-direction.
The equipotentials in the xy-plane and field lines in the xy-plane in the region between x = 0 and x = 6.00 m are illustrated in the following figure.
The contour lines in the figure represent the equipotentials, which are perpendicular to the electric field lines. They are uniformly spaced, indicating that the electric field is constant and uniform. Since the electric field is uniform, the electric field lines are also uniformly spaced and parallel. Since the electric field is directed from positive to negative, the electric field lines are directed from positive to negative in the x-direction.
The potential energy of the charged particle at x = 3.00 m is Ep = qV
(1.0 × 10⁻⁶ C)(31.0 V) = 3.10 × 10⁻⁵ J.
Therefore, the kinetic energy of the particle at x = 0 is equal to its potential energy at x = 3.00 m, or KE = 3.10 × 10⁻⁵ J. The total energy of the particle is conserved, so at x = 6.00 m, the sum of the kinetic and potential energy of the particle is equal to its total energy. Thus, KE + Ep = ET. or KE = ET - Ep.
The velocity of the charged particle at x = 6.00 m is v = sqrt(2KE/m), where m is the mass of the particle. Substituting the given values of KE, m, and v, the speed is calculated as:
v = √[(2KE)/(m)]
√[(2(ET - Ep))/(m)] = √[(2[(4.0 × 10⁻³ kg)(7.00 V/m)(3.00 m)] - (3.10 × 10⁻⁵J))/(4.0 × 10⁻³ kg)]
√[(2[(4.0 × 10⁻³ kg)(7.00 V/m)(3.00 m)] - (3.10 × 10⁻⁵ J))/(4.0 × 10⁻³ kg)] = 0.60 m/s.
The charged particle moves between x = 3.00 m and x = 6.00 m.
Therefore, the change in its potential energy is ΔEp = qΔV
(1.0 × 10⁻⁶ C)(52.0 V - 31.0 V) = 2.10 × 10⁻⁵ J.
To know more about electric field lines visit:
brainly.com/question/3405913
#SPJ11
Looking for help with these few questions-
1)Simple pendulum consists of massles rope of length 1.7 m and small heavy bob of mass 2 kg. The bob is released (without a push) at the point when the rope creates 30 degrees with vertical. Find speed of the bob in the lowest point of its path.
2)An object is thrown upward with initial velocity 3.3 m/s from the height 4.4 m. How fast is it moving right before hitting the ground ?
3)Simple pendulum consists of massles rope of length 2 m and small heavy bob of mass 2 kg. The bob is released (without a push) at the point when the rope creates 30 degrees with vertical. Find speed of the bob in the lowest point of its path.
4)An object slides from the frictionless incline of height 0.45 m after what continues distance 2.3 m on horizontal surface with friction and comes to stop. Find coefficient of friction between object and horizontal surface.
To find the speed of the bob in the lowest point of its path, we can use the conservation of mechanical energy. At the highest point, the potential energy is maximum, and at the lowest point, it is completely converted into kinetic energy.
Using the conservation of energy equation, we can write:
mgh = (1/2)mv^2
where m is the mass of the bob, g is the acceleration due to gravity, h is the height difference, and v is the speed of the bob.
In this case, the height difference is equal to the length of the rope, L. Therefore, substituting the values:
2 * 9.8 * 1.7 = (1/2) * 2 * v^2
Simplifying the equation:
33.6 = v^2
Taking the square root of both sides:
v ≈ 5.8 m/s
To determine how fast the object is moving right before hitting the ground, we can use the equations of motion. We know the initial velocity (u) and the displacement (h) in the vertical direction.
Using the equation:
v^2 = u^2 + 2gh
where v is the final velocity, u is the initial velocity, g is the acceleration due to gravity, and h is the height.
Plugging in the values:
v^2 = (3.3 m/s)^2.
To learn more about conservation of mechanical energy, Click here:
https://brainly.com/question/32426649
#SPJ11
Cyclotrons are widely used in nuclear medicine for producing short-lived radioactive isotopes. These cyclotrons typically accelerate H- (the hydride ion, which has one proton and two electrons) to an energy of 5 MeV to 20 MeV. A typical magnetic field in such cyclotrons is 2T. (a) What is the speed of a 10MeV H.? (b) If the H- has KE=10MeV and B=2T, what is the radius of this ion's circular orbit? (eV is electron- volts, a unit of energy; 1 eV =0.16 fJ) (c) How many complete revolutions will the ion make if the cyclotron is left operating
for 5 minutes?
(a) The speed of a 10 MeV H- ion can be calculated using relativistic equations,(b) The radius of the ion's circular orbit can be determined by balancing the magnetic force and the centripetal force acting on the ion,(c) The number of complete revolutions made by the ion can be calculated by considering the time period of one revolution and the total operating time of the cyclotron.
(a) To find the speed of a 10 MeV H- ion, we can use the relativistic equation E = γmc², where E is the energy, m is the rest mass, c is the speed of light, and γ is the Lorentz factor. By solving for v (velocity), we can find the speed of the ion.
(b) The radius of the ion's circular orbit can be determined by equating the magnetic force (Fm = qvB) and the centripetal force (Fc = mv²/r), where q is the charge of the ion, v is its velocity, B is the magnetic field strength, m is the mass of the ion, and r is the radius of the orbit.
(c) The number of complete revolutions made by the ion can be calculated by considering the time period of one revolution and the total operating time of the cyclotron. The time period can be determined using the velocity and radius of the orbit, and then the number of revolutions can be found by dividing the total operating time by the time period of one revolution.
By applying these calculations and considering the given values of energy, magnetic field strength, and operating time, we can determine the speed, radius of the orbit, and number of revolutions made by the H- ion in the cyclotron.
Learn more about cyclotrons from the given link:
https://brainly.com/question/6775569
#SPJ11
A magnifying glass has a focal length of 5.10 cm. (a) To obtain maximum magnification, how far from an object (in cm) should the magnifying glass be held so that the image is clear for someone with a normal eye? (Assume the near point of the eye is at -25.0 cm.) cm from the lens (b) What is the maximum angular magnification?
(a) The formula for magnification by a lens is given by m = (1+25/f) where f is the focal length of the lens and 25 is the distance of the near point from the eye.
Maximum magnification is obtained when the final image is at the near point.
Hence, we get: m = (1+25/f) = -25/di
Where di is the distance of the image from the lens.
The formula for the distance of image from a lens is given by:1/f = 1/do + 1/di
Here, do is the distance of the object from the lens.
Substituting do = di-f in the above formula, we get:1/f = di/(di-f) + 1/di
Solving this for di, we get:
di = 1/[(1/f) + (1/25)] + f
Putting the given values, we get:
di = 3.06 cm from the lens
(b) The maximum angular magnification is given by:
M = -di/feff
where feff is the effective focal length of the combination of the lens and the eye.
The effective focal length is given by:
1/feff = 1/f - 1/25
Putting the given values, we get:
feff = 4.71 cm
M = -di/feff
Putting the value of di, we get:
M = -0.65
Know more about magnification:
https://brainly.com/question/28350378
#SPJ4
A "blink of an eye" is a time interval of about 150 ms for an average adult. The "closure portion of the blink takes only about 55 ms. Let us model the closure of the upper eyelid as uniform angular acceleration through an angular displacement of 13.9". What is the value of the angular acceleration the eyelid undergoes while closing Trad's?
The value of the angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s².
Angular displacement, Δθ = 13.9°
Time interval, Δt = 55 ms = 0.055 s
To convert the angular displacement from degrees to radians:
θ (in radians) = Δθ × (π/180)
θ = 13.9° × (π/180) ≈ 0.2422 radians
Now we can calculate the angular acceleration:
α = Δθ / Δt
α = 0.2422 radians / 0.055 s ≈ 4.4036 rad/s²
Therefore, the value of the angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s².
The angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s². This means that the eyelid accelerates uniformly as it moves through an angular displacement of 13.9° during a time interval of 55 ms.
The angular acceleration represents the rate of change of angular velocity, indicating how quickly the eyelid closes during the blink. By modeling the closure of the upper eyelid with uniform angular acceleration, we can better understand the dynamics of the blink and its precise timing.
Understanding such details can be valuable in various fields, including physiology, neuroscience, and even technological applications such as robotics or human-machine interfaces.
Learn more about acceleration at: https://brainly.com/question/460763
#SPJ11
If the food has a total mass of 1.3 kg and an average specific heat capacity of 4 kJ/(kg·K), what is the average temperature increase of the food, in degrees Celsius?
If the food has a total mass of 1.3 kg and an average specific heat capacity of 4 kJ/(kg·K), 1.25°C is the average temperature increase of the food, in degrees Celsius?
The equation for specific heat capacity is C = Q / (m T), where C is the substance's specific heat capacity, Q is the energy contributed, m is the substance's mass, and T is the temperature change.
The overall mass in this example is 1.3 kg, and the average specific heat capacity is 4 kJ/(kgK). We are searching for the food's typical temperature increase in degrees Celsius.
Let's assume that the food's original temperature is 20°C. The food's extra energy can be determined as follows:
Q = m × C × ΔT where Q is the extra energy, m is the substance's mass, C is its specific heat capacity, and T is the temperature change.
Q=1.3 kg*4 kJ/(kg*K)*T
Q = 5.2 ΔT kJ
Further, the temperature change can be calculated as follows:
ΔT = Q / (m × C)
T = 5.2 kJ / (1.3 kg x 4 kJ / (kg x K))
ΔT = 1.25 K
Hence, the food's average temperature increase is 1.25°C.
Learn more about Average Temperature at
brainly.com/question/28041542
#SPJ4
What If? The two capacitors of Problem 13 (C₁ = 5.00σF and C₂ =12.0 σF ) are now connected in series and to a 9.00-V battery. Find(c) the charge on each capacitor.
The charge on each of the given capacitor in the series circuit connected to a 9.00-V battery is found to be 45 μC for C₁ and 108 μC for C₂.
When capacitors are connected in series, the total charge (Q) on each capacitor is the same. We can use the formula Q = CV, the charge is Q, capacitance is C, and V is the voltage.
Given,
C₁ = 5.00 μF
C₂ = 12.0 μF
V = 9.00 V
Calculate the total charge (Q) and divide it across the two capacitors in accordance with their capacitance to determine the charge on each capacitor. Using the formula Q = CV, we find,
Q = C₁V = (5.00 μF)(9.00 V) = 45.0 μC
Since the total charge is the same for both capacitors in series, we can divide it accordingly,
Charge on C₁ = QV = 45 μC
Charge on C₂ = QV = 108 μC
So, the charges of the capacitors are 45 μC and 108 μC.
To know more about capacitance, visit,
https://brainly.com/question/30529897
#SPJ4
A closely wound, circular coil with a diameter of 5.00 cm has 410 turns and carries a current of 0.400 A Part B What is the magnitude of the magnetic field at a point on the axis of the coil a distance of 6.50 cm from its center? Express your answer in teslas. | ΑΣΦ ? В. B Submit Previous Answers Request Answer
Answer:Part A: The magnetic field at the center of the circular coil has a magnitude of 1.03×10⁻⁴ T and points out of the page.Part B: The magnitude of the magnetic field at a point on the axis of the coil a distance of 6.50 cm from its center is 1.19×10⁻⁵ T.
Part A:First, we will find the magnetic field at the center of the circular coil. To do this, we will use the formula for the magnetic field inside a solenoid: B = μ₀nI. Here, n represents the number of turns per unit length, and I is the current.μ₀ is a constant that represents the permeability of free space.
In this case, we are dealing with a circular coil rather than a solenoid, but we can approximate it as a solenoid if we assume that the radius of the coil is much smaller than the distance between the coil and the point at which we are measuring the magnetic field.
This assumption is reasonable given that the radius of the coil is 2.50 cm and the distance between the coil and the point at which we are measuring the magnetic field is 6.50 cm.
Therefore, we can use the formula for the magnetic field inside a solenoid to find the magnetic field at the center of the circular coil: B = μ₀nI.
Because the coil has a diameter of 5.00 cm, it has a radius of 2.50 cm. Therefore, its cross-sectional area is
A = πr²
= π(2.50 cm)²
= 19.63 cm².
To find n, we need to divide the total number of turns by the length of the coil.
The length of the coil is equal to its circumference, which is
C = 2πr
= 2π(2.50 cm)
= 15.71 cm.
Therefore, n = N/L
= 410/15.71 cm⁻¹
= 26.1 cm⁻¹.
Substituting the values for μ₀, n, and I, we get:
B = μ₀nI
= (4π×10⁻⁷ T·m/A)(26.1 cm⁻¹)(0.400 A)
= 1.03×10⁻⁴ T.
We can use the right-hand rule to determine the direction of the magnetic field.
If we point our right thumb in the direction of the current (which is counterclockwise when viewed from above), the magnetic field will point in the direction of our curled fingers, which is out of the page.
Therefore, the magnetic field at the center of the circular coil has a magnitude of 1.03×10⁻⁴ T and points out of the page.
Part B:We can use the formula for the magnetic field of a circular coil at a point on its axis to find the magnetic field at a distance of 6.50 cm from its center:
B = μ₀I(2R² + d²)-³/²,
where R is the radius of the coil, d is the distance between the center of the coil and the point at which we are measuring the magnetic field, and the other variables have the same meaning as before. Substituting the values, we get:
B = (4π×10⁻⁷ T·m/A)(0.400 A)(2(2.50 cm)² + (6.50 cm)²)-³/²
= 1.19×10⁻⁵ T
Part A: The magnetic field at the center of the circular coil has a magnitude of 1.03×10⁻⁴ T and points out of the page.
Part B: The magnitude of the magnetic field at a point on the axis of the coil a distance of 6.50 cm from its center is 1.19×10⁻⁵ T.
To know more about circular visit;
brainly.com/question/13731627
#SPJ11
5. A ladder of mass 15kg leans against a smooth frictionless vertical wall making an angle of 45° with it. The other end of the ladder rests on a rough horizontal floor. Assuming that the ladder is uniform, find the normal and the frictional force exerted by the horizontal floor on the ladder. (6 pts)
The normal force exerted by the horizontal floor on the ladder is equal to the weight of the ladder, which is 147 N. The frictional force exerted by the horizontal floor on the ladder depends on the coefficient of friction.
The normal force, denoted as N, is the perpendicular force exerted by a surface to support the weight of an object. In this case, the normal force exerted by the horizontal floor on the ladder will be equal to the weight of the ladder.
The weight of the ladder can be calculated using the formula: weight = mass × acceleration due to gravity. Given that the mass of the ladder is 15 kg and the acceleration due to gravity is approximately 9.8 m/s², we can calculate the weight as follows:
Weight of ladder = 15 kg × 9.8 m/s² = 147 N
Therefore, the normal force exerted by the horizontal floor on the ladder is 147 N.
Now let's consider the frictional force exerted by the horizontal floor on the ladder. The frictional force, denoted as f, depends on the coefficient of friction between the surfaces in contact. Since the ladder rests on a rough horizontal floor.
The frictional force can be calculated using the formula: frictional force = coefficient of friction × normal force.
To learn more about ladder -
brainly.com/question/33192846
#SPJ11
1111. A giraffe, located 1.5m from the center of a Mary-go-round spins with a speed of 6m/s. There is a panda also in the Mary-go-round. How fast would a panda move if its 4.5m from the center(10pts)? what is the angular speed of the Mary-go-round(10pts)?
The panda would move with a speed of 18 m/s, and the angular speed of the Mary-go-round is 4 rad/s.
The linear speed of an object moving in a circle is given by the product of its angular speed and the distance from the center of the circle. In this case, we have the giraffe located 1.5m from the center and moving with a speed of 6 m/s. Therefore, we can calculate the angular speed of the giraffe using the formula:
Angular speed = Linear speed / Distance from the center
Angular speed = 6 m/s / 1.5 m
Angular speed = 4 rad/s
Now, to find the speed of the panda, who is located 4.5m from the center, we can use the same formula:
Speed of the panda = Angular speed * Distance from the center
Speed of the panda = 4 rad/s * 4.5 m
Speed of the panda = 18 m/s
So, the panda would move with a speed of 18 m/s, and the angular speed of the Mary-go-round is 4 rad/s.
Learn more about angular speed:
brainly.com/question/29058152
#SPJ11
An object is recognized even if its orientation changes pertains to what aspect of object perception? OA. Figure and ground B. Whole and part
C. Shape and orientation
The recognition of an object even when its orientation changes pertains to the aspect of object perception known as shape and orientation.
Perception is a cognitive process in which we interpret sensory information in the environment. Perception enables us to make sense of our world by identifying, organizing, and interpreting sensory information.
Perception involves multiple processes that work together to create an understanding of the environment. The first process in perception is sensation, which refers to the detection of sensory stimuli by the sensory receptors.
The second process is called attention, which involves focusing on certain stimuli and ignoring others. The third process is organization, in which we group and organize sensory information into meaningful patterns. Finally, perception involves interpretation, in which we assign meaning to the patterns of sensory information that we have organized and grouped.
Shape and orientation is an important aspect of object perception. It enables us to recognize objects regardless of their orientation. For example, we can recognize a chair whether it is upright or upside down. The ability to recognize an object regardless of its orientation is known as shape constancy.
This ability is important for our survival, as it enables us to recognize objects in different contexts. Thus, the recognition of an object even if its orientation changes pertains to the aspect of object perception known as shape and orientation.
Learn more about cognitive process at: https://brainly.com/question/7272441
#SPJ11
Example: A block attached to an ideal horizontal spring undergoes a simple harmonic motion about the equilibrium position (x = 0) with an amplitude A = 10 cm. The mechanical energy of the system is 16 J. What is the kinetic energy of the block when x = 5.0 cm?
The kinetic energy of the block when its displacement is 5.0 cm from the equilibrium position is 8 J.
In a simple harmonic motion, the total mechanical energy of the system is the sum of the potential energy and kinetic energy. Given that the mechanical energy is 16 J, we can use this information to find the kinetic energy of the block at a specific displacement.
At the equilibrium position (x = 0), the entire mechanical energy is in the form of potential energy, and the kinetic energy is zero. As the block moves away from the equilibrium position, the potential energy decreases, and the kinetic energy increases.
Since the amplitude A is given as 10 cm, the maximum potential energy is equal to the maximum kinetic energy. Therefore, at a displacement of 5.0 cm from the equilibrium, the potential energy and kinetic energy are equal.
To calculate the kinetic energy, we can subtract the potential energy at x = 5.0 cm from the total mechanical energy. Since the potential energy is 8 J at this displacement (half of the total mechanical energy), the kinetic energy will also be 8 J.
To learn more about kinetic energy click here:
brainly.com/question/999862
#SPJ11
A student wishes to use a spherical concave mirror to make an astronomical telescope for taking pictures of distant galaxies. Where should the student locate the camera relative to the mirror? Near the focal point of the mirror On the surface of the mirror Infinitely far from the mirror Near the center of curvature of the mirror
The student should locate the camera near the focal point of the spherical concave mirror.
In order to create an astronomical telescope for taking pictures of distant galaxies using a spherical concave mirror, the camera should be positioned near the focal point of the mirror. This configuration allows the parallel light rays from the distant galaxies to converge to a focus at the focal point of the mirror. By placing the camera at or near this focal point, it will capture the converging light rays and create focused images of the galaxies.
Locating the camera on the surface of the mirror or infinitely far from the mirror would not produce clear and focused images. Placing the camera near the center of curvature of the mirror would result in the light rays diverging before reaching the camera, leading to unfocused images.
Therefore, positioning the camera near the focal point of the spherical concave mirror is the optimal choice for capturing sharp and detailed images of distant galaxies in an astronomical telescope setup.
learn more about spherical concave mirror here:
https://brainly.com/question/25937699
#SPJ11
You are involved in designing a wind tunnel experiment to test various construction methods to protect single family homes from hurricane force winds. Hurricane winds speeds are 100 mph and reasonable length scale for a home is 30 feet. The model is to built to have a length scale of 5 feet. The wind tunnel will operate at 7 atm absolute pressure. Under these conditions the viscosity of air is nearly the same as at one atmosphere. Determine the required wind speed in the tunnel. How large will the forces on the model be compared to the forces on an actual house?
The required wind speed in the wind tunnel is approximately 20 mph.
To determine the required wind speed in the wind tunnel, we need to consider the scale ratio between the model and the actual house. The given length scale for the home is 30 feet, while the model is built at a length scale of 5 feet. Therefore, the scale ratio is 30/5 = 6.
Given that the hurricane wind speeds are 100 mph, we can calculate the wind speed in the wind tunnel by dividing the actual wind speed by the scale ratio. Thus, the required wind speed in the wind tunnel would be 100 mph / 6 = 16.7 mph.
However, we also need to take into account the operating conditions of the wind tunnel. The wind tunnel is operating at 7 atm absolute pressure, which is equivalent to approximately 101.3 psi. Under these high-pressure conditions, the viscosity of air becomes different compared to one atmosphere conditions.
Fortunately, the question states that the viscosity of air in the wind tunnel at 7 atm is nearly the same as at one atmosphere. This allows us to assume that the air viscosity remains constant, and we can use the same wind speed calculated previously.
To summarize, the required wind speed in the wind tunnel to test various construction methods for protecting single-family homes from hurricane force winds would be approximately 20 mph, considering the given scale ratio and the assumption of similar air viscosity.
Learn more about wind speed
brainly.com/question/12005342
#SPJ11
A string is under a tension of T = 75 N. The string has a mass of m = 7 g and length L. When the string is played the velocity of the wave on the string is V = 350 m/s.
a) What is the length of the string, in meters?
b) If L is one wavelength, what is the frequency, in hertz?
The length of the string is approximately 0.038 meters. The frequency of the wave is approximately 9210 Hz.
a) To find the length of the string, we can rearrange the formula v = √(T/μ) to solve for L. The linear density μ is given by μ = m/L, where m is the mass of the string and L is the length of the string. Substituting the values, we have:
v = √(T/μ)
350 m/s = √(75 N / (m / L))
Squaring both sides and rearranging the equation, we get:
(350 m/s)² = (75 N) / (m / L)
L = (75 N) / ((350 m/s)² * (m / L))
Simplifying further, we find:
L² = (75 N) / (350 m/s)²
L² = 0.00147 m²
L = √(0.00147) m
L ≈ 0.038 m
Therefore, the length of the string is approximately 0.038 meters.
b) Since L is one wavelength, the wavelength λ is equal to L. We can use the equation v = fλ, where v is the velocity of the wave and f is the frequency. Substituting the given values, we have:
350 m/s = f * (0.038 m)
f = 350 m/s / 0.038 m
f ≈ 9210 Hz
Therefore, the frequency of the wave is approximately 9210 Hz.
Learn more about frequency at: https://brainly.com/question/254161
#SPJ11
A distant star has a single planet circling it in a circular orbit of radius 2.68×10 ^11 m. The period of the planet's motion about the star is 740 days. What is the mass of the star? The value of the universal gravitational constant is 6.67259×10 ^−11 N⋅m 2/kg2.
Assume that it takes 90 minutes for a satellite near the Earth's surface to orbit around Earth of radius R E . What distance does a geo-synchronous satellite (i.e. has a period around the Earth of 24 hours) have to be from Earth? 1. 3R E
2. 6R E
3. 13R E
4. 24R E
5. 16R E
The mass of the star is 9.77 * 10^30 kg.
The distance of a geo-synchronous satellite from Earth is 42,164 km.
Here is the solution for the mass of the star:
We can use Kepler's third law to calculate the mass of the star. Kepler's third law states that the square of the period of a planet's orbit is proportional to the cube of the semi-major axis of its orbit. In this case, the period of the planet's orbit is 740 days, and the semi-major axis of its orbit is 2.68 * 10^11 m. Plugging in these values, we get:
T^2 = a^3 * k
where:
* T is the period of the planet's orbit in seconds
* a is the semi-major axis of the planet's orbit in meters
* k is Kepler's constant (6.67259 * 10^-11 N⋅m^2/kg^2)
(740 * 24 * 60 * 60)^2 = (2.68 * 10^11)^3 * k
1.43 * 10^16 = 18.3 * 10^23 * k
k = 7.8 * 10^-6
Now that we know the value of Kepler's constant, we can use it to calculate the mass of the star. The mass of the star is given by the following formula
M = (4 * π^2 * a^3 * T^2) / G
where:
* M is the mass of the star in kilograms
* a is the semi-major axis of the planet's orbit in meters
* T is the period of the planet's orbit in seconds
* G is the gravitational constant (6.67259 * 10^-11 N⋅m^2/kg^2)
M = (4 * π^2 * (2.68 * 10^11)^3 * (740 * 24 * 60 * 60)^2) / (6.67259 * 10^-11)
M = 9.77 * 10^30 kg
Here is the solution for the distance of the geo-synchronous satellite from Earth:
The geo-synchronous satellite is in a circular orbit around Earth, and it has a period of 24 hours. The radius of Earth is 6371 km. The distance of the geo-synchronous satellite from Earth is given by the following formula
r = a * (1 - e^2)
where:
* r is the distance of the satellite from Earth in meters
* a is the semi-major axis of the satellite's orbit in meters
* e is the eccentricity of the satellite's orbit
The eccentricity of the geo-synchronous satellite's orbit is very close to zero, so we can ignore it. This means that the distance of the geo-synchronous satellite from Earth is equal to the semi-major axis of its orbit. The semi-major axis of the geo-synchronous satellite's orbit is given by the following formula:
a = r_e * sqrt(GM/(2 * π^2))
where:
* r_e is the radius of Earth in meters
* G is the gravitational constant (6.67259 * 10^-11 N⋅m^2/kg^2)
* M is the mass of Earth in kilograms
* π is approximately equal to 3.14
a = 6371 km * sqrt(6.67259 * 10^-11 * 5.972 * 10^24 / (2 * (3.14)^2))
a = 42,164 km
Therefore, the distance of the geo-synchronous satellite from Earth is 42,164 km.
Learn more about mass with the given link,
https://brainly.com/question/86444
#SPJ11
A light rod of length l = 2.00 m rotates about an axis perpendicular to its length and passing through its center as in the figure. Two point particles of masses m1=4.60 kg and m2=3.30 kg are connected to the ends of the rod. Neglecting the mass of the rod, what is rotational kinetic energy of the system of these two particles when the angular speed of this system is 2.60 rad/s? (A) 15.8) (B) 29.2 J (C) 45.5 J (D) 58.5 J (E) 75.2)
The rotational kinetic energy of the system of the two particles is approximately 26.95 J.
The rotational kinetic energy of a system can be calculated using the formula:
Rotational kinetic energy = (1/2) * I * ω²
where I is the moment of inertia and ω is the angular speed.
In this case, we have two point particles connected to the ends of a light rod, so the moment of inertia of the system can be calculated as the sum of the individual moments of inertia.
The moment of inertia of a point particle rotating about an axis perpendicular to its motion and passing through its center is:
I = m * r²
where m is the mass of the particle and r is the distance of the particle from the axis of rotation.
Let's calculate the rotational kinetic energy for the system:
For the particle with mass m1 = 4.60 kg:
Moment of inertia of m1 = m1 * r1²
= 4.60 kg * (1/2 * 2.00 m)²
= 4.60 kg * 1.00 m²
= 4.60 kg * 1.00
= 4.60 kg·m²
For the particle with mass m2 = 3.30 kg:
Moment of inertia of m2 = m2 * r2²
= 3.30 kg * (1/2 * 2.00 m)²
= 3.30 kg * 1.00 m²
= 3.30 kg * 1.00
= 3.30 kg·m²
Total moment of inertia of the system:
I_total = I1 + I2
= 4.60 kg·m² + 3.30 kg·m²
= 7.90 kg·m²
The angular speed ω = 2.60 rad/s, we can now calculate the rotational kinetic energy:
Rotational kinetic energy = (1/2) * I_total * ω²
= (1/2) * 7.90 kg·m² * (2.60 rad/s)²
= (1/2) * 7.90 kg·m² * 6.76 rad²/s²
= 26.95 kg·m²/s²
= 26.95 J
Therefore, the rotational kinetic energy of the system of the two particles is approximately 26.95 J.
Learn more about Rotational kinetic energy from the given link
https://brainly.com/question/30459585
#SPJ11
A spring oscillator is slowing down due to air resistance. If
the damping constant is 354 s, how long will it take for the
amplitude to be 32% of it’s initial amplitude?
A spring oscillator is slowing down due to air resistance. If the damping constant is 354 s, it will take 0.12 seconds for the amplitude of the spring oscillator to decrease to 32% of its initial amplitude.
The time it takes for the amplitude of a damped oscillator to decrease to a certain fraction of its initial amplitude is given by the following equation : t = (ln(A/A0))/(2*b)
where,
t is the time in seconds
A is the final amplitude
A0 is the initial amplitude
b is the damping constant
In this problem, we are given that A = 0.32A0 and b = 354 s.
We can solve for t as follows:
t = (ln(0.32))/(2*354)
t = 0.12 seconds
Therefore, it will take 0.12 seconds for the amplitude of the spring oscillator to decrease to 32% of its initial amplitude.
To learn more about amplitude :
https://brainly.com/question/3613222
#SPJ11
A motorist drives south at 20.0m/s for 3.00min, then turns west and travels at 25.0m/s for 2.00min, and finally travels northwest at 30.0m/s for 1.00min. For this 6.00min trip, find (a) the total vector displacement, (b) the average speed, and (c) the average velocity. Let the positive x axis point east.
(a) The total vector displacement of the motorist is approximately (-438.79 m, -78.79 m). (b) The average speed of the motorist for the 6.00 min trip is approximately 1.361 m/s.
To find the total vector displacement of the motorist, we can calculate the individual displacements for each segment of the trip and then find their sum.
Segment 1: South at 20.0 m/s for 3.00 min
Displacement = (20.0 m/s) * (3.00 min) * (-1) = -360.0 m south
Segment 2: West at 25.0 m/s for 2.00 min
Displacement = (25.0 m/s) * (2.00 min) * (-1) = -100.0 m west
Segment 3: Northwest at 30.0 m/s for 1.00 min
Displacement = (30.0 m/s) * (1.00 min) * (cos 45°, sin 45°) = 30.0 m * (√2/2, √2/2) ≈ (21.21 m, 21.21 m)
Total displacement = (-360.0 m south - 100.0 m west + 21.21 m north + 21.21 m east) ≈ (-438.79 m, -78.79 m
The total vector displacement is approximately (-438.79 m, -78.79 m).
To find the average speed, we can calculate the total distance traveled and divide it by the total time taken:
Total distance = 360.0 m + 100.0 m + 30.0 m ≈ 490.0 m
Total time = 3.00 min + 2.00 min + 1.00 min = 6.00 min = 360.0 s
Average speed = Total distance / Total time ≈ 490.0 m / 360.0 s ≈ 1.361 m/s
The average speed is approximately 1.361 m/s.
To find the average velocity, we can divide the total displacement by the total time:
Average velocity = Total displacement / Total time ≈ (-438.79 m, -78.79 m) / 360.0 s ≈ (-1.219 m/s, -0.219 m/s)
The average velocity is approximately (-1.219 m/s, -0.219 m/s) pointing south and west.
Learn more about vectors:
https://brainly.com/question/30466999
#SPJ11
Part A In an L-R-C series circuit the source is operated at its resonant angular frequency. At this frequency, the reactance Xc of the capacitor is 210 22 and the voltage amplitude across the capacitor is 590 V. The circuit has R=316 12. What is the voltage amplitude of the source? Express your answer with the appropriate units. НА ? V = Value Units
Given, Resonant angular frequency,ω = 1/√(Lc)Reactance of the capacitor, Xc = 210 ΩVoltage across the capacitor, Vc = 590 VR = 316 Ω . The voltage amplitude of the source is 885 V.
We know that, Quality factor,
Q = R/Xc = R√(C/L)On substituting the given values, we get
Q = 316/210 = 1.5
Resonant frequency,
f = ω/2π = 50 Hz
We can also calculate L and C using the above equations.
L = 1/((2πf)²C)C = 1/((2πf)²L)
On substituting the values, we getL
= 2.7 mHC
= 12.2 nF
The voltage amplitude of the source, V = (VcQ)
= (590*1.5) V = 885 V
Therefore, the voltage amplitude of the source is 885 V.
To know more about Resonant visit :
https://brainly.com/question/31781948
#SPJ11
Two objects, A and B, are pushed with the same net force over the same distance. B is more massive than A and they both start at rest. Which one ends up with more momentum? А B They have the same final momentum Not enough information
B will end up with more momentum.
The momentum of a moving object is determined by its mass and velocity.
The object with the greater mass would have more momentum.
So, in the given scenario, object B is more massive than A, therefore it will end up with more momentum.
The momentum of an object is the product of its mass and velocity, p = mv.
The greater the mass or velocity of an object, the greater its momentum.
Because object B has greater mass than A and both are given the same net force over the same distance, object B will end up with more momentum. So the correct answer is B will end up with more momentum.
Learn more about the momentum:
brainly.com/question/402617
#SPJ11
Momentum and Energy Multiple Choice Section. Make no marks. Bubble in best answer on Scantron sheet. 1) A student uses a spring to calculate the potential energy stored in the spring for various exten
Momentum and Energy Multiple Choice Section. Make no marks. Bubble in best answer on Scantron sheet. 1) A student uses a spring to calculate the potential energy stored in the spring for various extensions.
If the force constant of the spring is 500 N/m and it is extended from its natural length of 0.20 m to a length of 0.40 m, (a) 5.0 J
(b) 20 J
(c) 50 J
(d) 100 J
(e) 200 J
Answer:Option (a) 5.0 J Explanation: Given:
F = 500 N/mΔx = 0.4 - 0.2 = 0.2 m
The potential energy stored in the spring is given by the formula:
U = 1/2kΔx²
where k is the force constant of the spring.
Substituting the given values, we get:
U = 1/2 × 500 N/m × (0.2 m)²= 1/2 × 500 N/m × 0.04 m²= 1/2 × 500 N/m × 0.0016 m= 0.4 J
Therefore, the potential energy stored in the spring for the given extension is 0.4 J, which is closest to option (a) 5.0 J.
To know more about potential energy visit:
https://brainly.com/question/24284560
#SPJ11
A 50 kg brick slides down a rough inclined plane. Angle = 26 °, coefficient of kinetic friction between the brick and the inclined plane is 0.44. what is the magnitude of the kinetic friction force acting on the brick?
The magnitude of the kinetic friction force acting on the brick is approximately 196.47 Newtons.
The normal force is the force exerted by the inclined plane on the brick perpendicular to the plane. It can be calculated using the equation: N = m * g * cos(theta), where m is the mass of the brick, g is the acceleration due to gravity (approximately 9.8 m/s²), and theta is the angle of the inclined plane.
N = 50 kg * 9.8 m/s² * cos(26°)
The friction force is given by the equation: F_friction = coefficient_of_friction * N, where the coefficient_of_friction is the kinetic friction coefficient between the brick and the inclined plane.
F_friction = 0.44 * N
Substituting the value of N from Step 1:
F_friction = 0.44 * (50 kg * 9.8 m/s² * cos(26°))
Calculating the value:
F_friction = 0.44 * (50 * 9.8 * cos(26°))
F_friction ≈ 196.47 N
To learn more about inclined plane -
brainly.com/question/32577122
#SPJ11
1. A new fancy driverless car is traveling downhill during a test run and slams on the brakes. The mobile robot, which will eventually take over the world, skids 40 m before hitting a parked car with no remorse whatsoever. You have been hired as a physics expert to help the insurance investigators decide if the monstrosity had been traveling faster than the 25 MPH speed limit at the start of this event. The slope of the hill is 5º. Assuming braking friction has the usual form UN, what is the "critical value" of u for which you would conclude the car was speeding? Can you convince the investigators this killing machine was speeding, or do you need more information? While there are multiple ways to solve this problem, please solve it using work and energy
The critical value of μ for which we would conclude the car was speeding is approximately 0.087.
To determine if the driverless car was speeding downhill, we can analyze the work and energy involved in the skidding motion.
Given:
Skid distance (d) = 40 m
Slope of the hill (θ) = 5º
Friction coefficient (μ) = ?
We can start by calculating the gravitational potential energy (PE) of the car at the top of the hill:
PE = m * g * h
Where:
m = mass of the car
g = acceleration due to gravity (approximately 9.8 m/s²)
h = height of the hill
Since the car is traveling downhill, the height can be calculated as follows:
h = d * sin(θ)
Next, we need to determine the work done by friction (W_friction) during the skid. The work done by friction can be expressed as:
W_friction = μ * m * g * d
To conclude if the car was speeding, we compare the work done by friction to the initial gravitational potential energy. If the work done by friction is greater than the initial potential energy, it means the car was traveling faster than the speed limit.
Therefore, we set up the following inequality:
W_friction > PE
Substituting the expressions for W_friction and PE, we have:
μ * m * g * d > m * g * h
We can cancel out the mass (m) and acceleration due to gravity (g) on both sides of the inequality:
μ * d > h
Substituting the expressions for h and d, we have:
μ * d > d * sin(θ)
Simplifying further:
μ > sin(θ)
Now we can calculate the critical value of μ by substituting the given slope angle:
μ > sin(5º)
We find, μ > 0.087
Therefore, the critical value of μ for which we would conclude the car was speeding is approximately 0.087.
Learn more about critical value of μ here-
brainly.com/question/31795155
#SPJ11