When is it better to have a session pass versus just paying general admission?

After 8 visits: How much would each person pay? Show your work for calculations.

Session Pass______? General Admission______?

After 10 visits: How much would each person pay? Show your work for calculations.

Session pass _____? General Admission_____?

Answers

Answer 1

After 8 visits: General Admission: Each person would pay $200. Annual Public Session Pass: Each person would pay $299.

After 10 visits: General Admission: Each person would pay $250. Annual Public Session Pass: Each person would still pay $299.

To determine when it is better to have a session pass versus just paying general admission, we need to compare the costs for each option.

General Admission with skate rental: $25

Annual Public Session Pass with skate rental: $299

After 8 visits:

For General Admission, the cost per visit would be $25 per visit.

Total cost for 8 visits: $25 x 8 = $200

For the Annual Public Session Pass, the cost is a one-time payment of $299, regardless of the number of visits. Therefore, after 8 visits, the cost remains the same at $299.

Therefore, after 8 visits, it would be more cost-effective to have the Annual Public Session Pass as the cost per person would be $299.

After 10 visits:

For General Admission, the cost per visit remains at $25 per visit.

Total cost for 10 visits: $25 x 10 = $250

For the Annual Public Session Pass, the cost remains the same at $299, regardless of the number of visits.

Therefore, after 10 visits, it would still be more cost-effective to have the Annual Public Session Pass as the cost per person would still be $299.

For such more question on Annual:

https://brainly.com/question/28990623

#SPJ8

The following question may be like this:

When is it better to have a session pass versus just paying general admission? After 8 visits: How much would each person pay? Show your work for calculations. Session Pass______? General Admission______?After 10 visits: How much would each person pay? Show your work for calculations.Session pass _____? General Admission_____?

GENERAL ADMISSION WITH SKATE RENTAL  $25

ANNUAL PUBLIC SESSION PASS WITH SKATE RENTAL $299

LOCKER RENTAL-ONE TIME USE  $5

HELMET RENTAL  $5

SKATE HELPER-PER HOUR $15


Related Questions


what is the equation of this line?

Answers

The calculated equation of the line is y = -2x + 3

How to calculate the equation of the line

From the question, we have the following parameters that can be used in our computation:

The graph

Where, we have

(1, 1) and (0, 3)

The equation of the line is calculated as

y = mx + c

Where

c = y when x = 0

So, we have

y = mx + 3

Using the points, we have

m + 3 = 1

So, we have

m = -2

This means that

y = -2x + 3

Hence, the equation of the line is y = -2x + 3

Read more about linear function at

https://brainly.com/question/15602982

#SPJ1

A = –5(6t – 7) + 11. B = 3(x – 5) – 3(x + 5).
B = 8 + 2y – 5(2y – 6) + 4.
C = –5z + 5z(z – 3) – 7(6 – 8z).

Answers

Answer: the answer is 110.8

Step-by-step explanation: add um all up

Which of the following lists of ordered pairs is a function?

Answers

The list of ordered pairs that is a function is Option D.

What is a Math Function?

A math function is a relationship that assigns a unique output value to each input value. It describes how one quantity depends on another.

Functions are commonly represented using mathematical notation, such as f(x), and they play a fundamental role in various areas of mathematics and its applications.

A  function is a relation in which one input (x-value) is assigned to exactly one output (y-value).

Since option D's x-values do not repeat, then it is a function.

Read more about math functions here:

https://brainly.com/question/11624077

#SPJ1

Find the indefinite integral. (Use C for the constant of integration.)
1. v + 1/
(2v − 20)^5dv

2. x^2/
x − 5 dx

3. x cos 8x2 dx
4. 176/e^−x + 1 dx
5.

Answers

1. The indefinite integral of (v + 1) / (2v - 20)^5 dv is -1 / (8(2v - 20)^4) + C.

2. The indefinite integral of x^2 / (x - 5) dx is (1/2) x^2 + 5x + 25 ln|x - 5| + C.

3. The indefinite integral of x cos(8x^2) dx is (1/16) sin(8x^2) + C.

4. The indefinite integral of 176 / e^(-x) + 1 dx is 176 ln|1 + e^x| + C.

1. To find the indefinite integral of (v + 1) / (2v - 20)^5 dv:

Let u = 2v - 20. Then du = 2 dv.

The integral becomes:

(1/2) ∫ (1/u^5) du

Now we can integrate using the power rule:

(1/2) ∫ u^(-5) du

Applying the power rule, we get:

(1/2) * (u^(-4) / -4) + C

= -1 / (8u^4) + C

Substituting back u = 2v - 20:

= -1 / (8(2v - 20)^4) + C

Therefore, the indefinite integral of (v + 1) / (2v - 20)^5 dv is -1 / (8(2v - 20)^4) + C.

2. To find the indefinite integral of x^2 / (x - 5) dx:

We can use polynomial long division to simplify the integrand:

x^2 / (x - 5) = x + 5 + 25 / (x - 5)

Now we can integrate each term separately:

∫ x dx + ∫ (5 dx) + ∫ (25 / (x - 5) dx)

Using the power rule, we get:

(1/2) x^2 + 5x + 25 ln|x - 5| + C

Therefore, the indefinite integral of x^2 / (x - 5) dx is (1/2) x^2 + 5x + 25 ln|x - 5| + C.

3. To find the indefinite integral of x cos(8x^2) dx:

We can use the substitution method. Let u = 8x^2, then du = 16x dx.

The integral becomes:

(1/16) ∫ cos(u) du

Integrating cos(u), we get:

(1/16) sin(u) + C

Substituting back u = 8x^2:

(1/16) sin(8x^2) + C

Therefore, the indefinite integral of x cos(8x^2) dx is (1/16) sin(8x^2) + C.

4. To find the indefinite integral of 176 / e^(-x) + 1 dx:

We can simplify the integrand by multiplying the numerator and denominator by e^x:

176 / e^(-x) + 1 = 176e^x / 1 + e^x

Now we can integrate:

∫ (176e^x / 1 + e^x) dx

Using u-substitution, let u = 1 + e^x, then du = e^x dx:

∫ (176 du / u)

Integrating 176/u, we get:

176 ln|u| + C

Substituting back u = 1 + e^x:

176 ln|1 + e^x| + C

Therefore, the indefinite integral of 176 / e^(-x) + 1 dx is 176 ln|1 + e^x| + C.

for such more question on integral

https://brainly.com/question/12231722

#SPJ8

please help will give brainliest...........

Answers

A

no, because they are both right triangles and

the one on the left is 88° at the right anglr

determine where there is a minimum or maximum value to the quadratic function. h(t)=-8t^2+4t-1. Find the minimum or maximum value of h

Answers

To determine whether there is a minimum or maximum value to the quadratic function h(t) = -8t² + 4t - 1 and find the minimum or maximum value of h, one has to follow the steps given below. So, the minimum or maximum value of h = -1/2.

Step 1: Write the quadratic function in standard form.

The standard form of a quadratic function is f(x) = ax² + bx + c, where a, b, and c are constants.

h(t) = -8t² + 4t - 1 ... (1)

Step 2: Calculate the axis of symmetry of the parabola.

The axis of symmetry of the parabola is given by x = -b/2a, where a and b are the coefficients of x² and x, respectively. Therefore, the axis of symmetry of the parabola given by h(t) = -8t² + 4t - 1 is given by: t = -b/2a = -4/(2 * (-8)) = 4/16 = 1/4

Step 3: Calculate the vertex of the parabola.

The vertex of the parabola is given by (h, k), where h and k are the coordinates of the vertex. Therefore, the coordinates of the vertex of the parabola given by h(t) = -8t² + 4t - 1 are given by: (1/4, h(1/4))

Substituting t = 1/4 in Equation (1), we have: h(1/4) = -8(1/4)² + 4(1/4) - 1h(1/4) = -8/16 + 4/4 - 1h(1/4) = -1/2 + 1 - 1h(1/4) = -1/2

Therefore, the vertex of the parabola given by h(t) = -8t² + 4t - 1 is given by the point(1/4, -1/2)

Step 4: Determine the nature of the extrema of the functionThe coefficient of the x² term in Equation (1) is -8, which is negative. Therefore, the parabola is downward-facing and the vertex represents a maximum value. Thus, the maximum value of the function h(t) = -8t² + 4t - 1 is given by h(1/4) = -1/2. Answer: Thus, the minimum or maximum value of h = -1/2.

For more questions on: quadratic function

https://brainly.com/question/28038123

#SPJ8      

HELP DUE IN 3 DAYS!!!!! Which symbol should go in the box to make the equation true, and why? (1 point) the fraction two fourths followed by a box followed by the fraction four eighths a >, because the fraction two fourths is equal to the fraction eight eighths. b >, because the fraction two fourths is equal to the fraction six eighths. c =, because the fraction four eighths is equal to the fraction two fourths. d =, because the fraction four eighths is equal to the fraction two halves.

Answers

The correct answer is c) =, because the fraction four eighths is equal to the fraction two fourths.

To determine which symbol should go in the box to make the equation true, let's analyze the fractions given and compare their values.

The fraction "two fourths" can be simplified to "one-half" since both the numerator and denominator can be divided by 2. Therefore, "two fourths" is equal to "one-half."

Now, let's look at the fraction "four eighths." We can simplify this fraction by dividing both the numerator and denominator by 4, which gives us "one-half" as well. So, "four eighths" is also equal to "one-half."

Now, based on the given fractions, we have the equation:

(one-half) [BOX] (one-half)

We need to determine the correct symbol to fill in the box.

Looking at the values of the fractions, we see that both "two fourths" and "four eighths" are equivalent to "one-half." Therefore, the correct symbol to make the equation true is the equality symbol (=).

Hence, the correct answer is:

c) =, because the fraction four eighths is equal to the fraction two fourths.

for such more question on fraction

https://brainly.com/question/1622425

#SPJ8

Si 3,390 kg de plomo ocupan un volumen de 0.3m3. Encuentra la densidad del plomo

Answers

The density of lead is 11.3 kg/m³.

The density of lead can be calculated by using the formula D = M/V, where D represents density, M represents mass and V represents volume. The density of lead is the ratio of the mass of lead to the volume occupied by it.

Density of Lead:

Given that the lead has a mass of 3.390 kg and occupies a volume of 0.3 m³.

Density of Lead (D) = Mass of Lead (M) / Volume of Lead (V)D = 3.390 kg / 0.3 m³D = 11.3 kg/m³

Therefore, the density of lead is 11.3 kg/m³.

For more such questions on density, click on:

https://brainly.com/question/26364788

#SPJ8

Which expression is equivalent to a18a6

Answers

Answer:

[tex]\textsf{B.} \quad a^{12}[/tex]

Step-by-step explanation:

To simplify the given rational expression, we can apply the rule of exponents, which states that when dividing two powers with the same base, we subtract the exponents.

Using this rule:

[tex]\dfrac{a^{18}}{a^{6}}= a^{18-6} = a^{12}[/tex]

Therefore, the given rational expression is equivalent to a¹².

There are 6 horses in a race. How many ways can the first three positions of the order of the finish occur assume there are no ties

Answers

The number of ways the first three positions of the order of finish can occur in a race with 6 horses and no ties can be calculated using permutation.

Since there are 6 horses competing for the first position, there are 6 possibilities for the first place.

Once the first place is determined, there are 5 remaining horses for the second place, and then 4 remaining horses for the third place.

Therefore, the total number of ways is calculated as follows:

6 (possibilities for first place) × 5 (possibilities for second place) × 4 (possibilities for third place) = 120 ways.

So, there are 120 different ways the first three positions can occur in the race.

HELP PLESSE
The total cost of a lunch is shared among 8 people. the total bill is 55 what is the cost

Answers

Answer: A,

Step-by-step explanation:

8 people, times whatever each person payed will equal to 55$ in total

Given the functions, f(x) = x2 + 2 and g(x) = 4x - 1, perform the indicated operation. When applicable, state the domain restriction.

Answers

The indicated operation is the composition of functions. To perform this operation, we substitute the expression for g(x) into f(x). The composition of f(g(x)) is given by f(g(x)) = (4x - 1)^2 + 2.

To compute f(g(x)), we first evaluate g(x) by substituting x into the expression for g(x): g(x) = 4x - 1. Next, we substitute this result into f(x): f(g(x)) = f(4x - 1).

Now, let's expand and simplify f(g(x)):

f(g(x)) = (4x - 1)^2 + 2

        = (4x - 1)(4x - 1) + 2

        = 16x^2 - 8x + 1 + 2

        = 16x^2 - 8x + 3.

The domain of f(g(x)) is the same as the domain of g(x) since the composition involves g(x). In this case, g(x) is defined for all real numbers. Therefore, the domain of f(g(x)) is also all real numbers.

In summary, the composition of f(g(x)) is given by f(g(x)) = 16x^2 - 8x + 3, and the domain of f(g(x)) is all real numbers.

for such more questions on  functions

https://brainly.com/question/11624077

#SPJ8

NO LINKS!! URGENT HELP PLEASE!!

29. A tree casts a shadow that is 12 feet long. If the tree is 20 feet tall, what is the angle of elevation of the sun? Draw a diagram to represent the situation. Round the answer to the nearest tenth.


30. In ΔABC, m∠A = 75°, m∠B = 50°, and c = 9. Draw ΔABC, then use the Law of Sines to find a. Round final answer to the nearest tenth.

Answers

Answer:

29. 59.06°

30. 10.6

Step-by-step explanation:

29.
By using the Tangent angle rule, we can find the angle of elevation,

We know that

Tan Angle = opposite/adjacent

Tan x=AB/BC

Tan x=20/12

Tan x=5/3

[tex]x=Tan^{- }(\frac{5}{3})[/tex]

x=59.06°

30.

The law of sine is a formula that can be used to find the lengths of the sides of a triangle, or to find the angles of a triangle, when two sides and the angle between them are known. The formula is:

a / sin(A) = b / sin(B) = c / sin(C)

Here taking

a / sin(A) = c / sin(C)

here A=75°, C=180-75-50=55° and c -9 and

we need to find a,

substituting value

a/Sin(75°)=9/Sin(55°)

a=9*Sin(75°)/Sin(55°)

a=10.61

Therefore, the value of a is 10.6

Answer:

Question 29:  Angle of Elevation is ------->  59.0°Question 30: The length of side A in --------> △ABC is approximately 10.3

Step-by-step explanation:Question 29: In this question, we can use the tangent function to solve the problem. We can set the Sun's elevation angle as theta (θ). Then we can get the equation:

        tan (θ) = 20/12, and solve for θ

Solve the problem:We can draw a right triangle with the tree, the shadow, and the Sun.The tree's height is the opposite side, and the length of the shadow is the adjacent side.The angle of the sun's elevation is the angle between the ground and the line from the top of the tree to the sun.We can set the angle of elevation of the sun as theta (θ).

       We then get the equation tan (θ) =  20/12

We can solve for theta (θ) using the equation

        θ = arctan(5/3)

We can use a calculator to find that: Let the angle of elevation =  θ

        Tan θ  =  opp/adj

        Tan θ  = 20/12

         θ  =  Tan^-1 (20/12)

          θ  =  59.03624346 degrees

           θ = 59.0 degrees

Draw the conclusion:

       Hence, the Angle of Elevation is ------->  59.0°

Question 30:    △

       m < C = 180 degrees - m<A - m<B

       m<C  = 180 degrees - 75 degrees  -  50 degrees

Simplify:

      m<C  =  55 degrees

Apply the Law of Sines:

       a/sin A  =  c/sin C

Substitute the values:

       a/sin 75 degrees  =  9/sin 55 degrees

Solve for A:

        a  =  9 * sin 75 degrees/sin 55 degrees

Calculate the value of A:

        a  =  10.3

Draw a conclusion:

Therefore, The length of side A in --------> △ABC is approximately 10.3

Hope this helps you!

find the inverse of each function

Answers

Answer:

Step-by-step explanation:

What is the equation in point slope form of the line that is perpendicular to the given line and passes through the point(2,5)?

Answers

Answer:

Step-by-step explanation:

To find the equation of a line that is perpendicular to a given line and passes through a specific point, we need to follow a few steps:

Find the slope of the provided line.

The point-slope form of a line is given by: y - y1 = m(x - x1), where (x1, y1) represents the given point.

Substituting the values, the equation of the perpendicular line becomes:

y - 5 = (-1/m)(x - 2)

Simplifying the equation further, we can rewrite it in point-slope form:

y - 5 = (-1/m)x + (2/m)

Margie's work for adding linear expressions is shown below. After checking her answer with the answer key, she solved it incorrectly.


Given (−2.67b + 11) − (5.38b − 15)
Step 1 −2.67b + 11 + (−5.38b) + 15
Step 2 −2.67b + 5.38b + 11 + 15
Step 3 (−2.67b + 5.38b) + (11 + 15)
Step 4 2.71b + 26


Part A: Identify and explain the first step where Margie made an error. (2 points)

Part B: Explain how to correctly write the expression in fewest terms by correcting the error in Part A. Show all work. (2 points)

Answers

Step-by-step explanation:

Part A: The first step where Margie made an error is Step 1:

−2.67b + 11 + (−5.38b) + 15

The error lies in the addition of the two terms: (−5.38b) + 15. Margie incorrectly added the two terms together instead of subtracting them.

Part B: To correctly write the expression in the fewest terms, we need to correct the error from Part A. The correct step-by-step process is as follows:

Given: (−2.67b + 11) − (5.38b − 15)

Step 1: Distribute the negative sign to the terms inside the second parentheses:

−2.67b + 11 − 5.38b + 15

Step 2: Combine like terms:

(−2.67b − 5.38b) + (11 + 15)

Step 3: Simplify:

−7.05b + 26

Therefore, the correct expression, written in the fewest terms, is −7.05b + 26.

Which is the graph of the linear inequality 1/2x – 2y > –6? On a coordinate plane, a solid straight line has a positive slope and goes through (negative 4, 2) and (4, 4). Everything above and to the left of the line is shaded. On a coordinate plane, a dashed straight line has a positive slope and goes through (negative 4, 2) and (4, 4). Everything above and to the left of the line is shaded. On a coordinate plane, a solid straight line has a positive slope and goes through (negative 4, 2) and (4, 4). Everything below and to the right of the line is shaded. On a coordinate plane, a dashed straight line has a positive slope and goes through (negative 4, 2) and (4, 4). Everything below and to the right of the line is shaded.

Answers

The correct graph of the linear inequality 1/2x - 2y > -6 is the one where a solid straight line has a positive slope and goes through (negative 4, 2) and (4, 4), and everything below and to the right of the line is shaded.

the population in Knox is 42000 and it is declining at a rate of 3.2% per year predict the population to the nearest whole number after 8 years

Answers

The predicted population of Knox, rounded to the nearest whole number, after 8 years is 32,599.

To predict the population of Knox after 8 years, we can use the given information that the population is currently 42,000 and it is declining at a rate of 3.2% per year.

To calculate the population after 8 years, we need to apply the rate of decline for each year. Let's break down the calculation step by step:

Calculate the population after the first year:

Population after 1 year = 42,000 - (3.2% of 42,000)

= 42,000 - (0.032 * 42,000)

= 42,000 - 1,344

= 40,656

Calculate the population after the second year:

Population after 2 years = 40,656 - (3.2% of 40,656)

= 40,656 - (0.032 * 40,656)

= 40,656 - 1,299.71

= 39,356.29

Continue this process for each year up to 8 years, applying the 3.2% rate of decline each time.

After performing these calculations for each year, we arrive at the population after 8 years:

Population after 8 years ≈ 32,599

Therefore, the predicted population of Knox, rounded to the nearest whole number, after 8 years is 32,599.

for such more question on population

https://brainly.com/question/13769205

#SPJ8

PLEASE I NEED HELP I DONT UNDERSTAND THIS

Answers

the simplified expression would be:

-5p(3r) = -5 * 3 * p * r = -15pr

So, the simplified form of -5p(3r) is -15pr.

7
What fraction of the shape is shaded?
18 mm
10 mm
12 mm

Answers

The shaded fraction of the shape is 2/3.

To determine the fraction of the shape that is shaded, we need to compare the shaded area to the total area of the shape.

1. Identify the shaded region in the shape. In this case, we have a shape with some part shaded.

2. Calculate the area of the shaded region. Given the dimensions provided, the area of the shaded region is determined by multiplying the length and width of the shaded part. In this case, the dimensions are 18 mm and 10 mm, so the area of the shaded region is (18 mm) × (10 mm) = 180 mm².

3. Calculate the total area of the shape. The total area of the shape is determined by multiplying the length and width of the entire shape. In this case, the dimensions are 18 mm and 12 mm, so the total area of the shape is (18 mm) × (12 mm) = 216 mm².

4. Determine the fraction. To find the fraction, divide the area of the shaded region by the total area of the shape: 180 mm² ÷ 216 mm². Simplifying this fraction gives us 5/6.

5. Convert the fraction to its simplest form. By dividing both the numerator and denominator by their greatest common divisor, we get the simplified fraction: 2/3.

Therefore, the fraction of the shape that is shaded is 2/3.

For more such questions on fraction, click on:

https://brainly.com/question/78672

#SPJ8

will give 100 points The box plots display measures from data collected when 15 athletes were asked how many miles they ran that day.

A box plot uses a number line from 0 to 13 with tick marks every one-half unit. The box extends from 1 to 3.5 on the number line. A line in the box is at 2. The lines outside the box end at 0 and 5. The graph is titled Group A's Miles, and the line is labeled Number of Miles.

A box plot uses a number line from 0 to 13 with tick marks every one-half unit. The box extends from 1 to 5 on the number line. A line in the box is at 2.5. The lines outside the box end at 0 and 11. The graph is titled Group C's Miles, and the line is labeled Number of Miles.

Which group of athletes ran the least miles based on the data displayed?

Group A, with a median value of 2 miles
Group C, with a median value of 2.5 miles
Group C, with a narrow spread in the data
Group A, with a wide spread in the data

Answers

Based on the data displayed, Group A ran the least miles. The box plot for Group A has a box extending from 1 to 3.5 on the number line, indicating that the majority of athletes in Group A ran between 1 and 3.5 miles. Additionally, the median value for Group A is 2 miles, which is lower than the median value of 2.5 miles for Group C. Therefore, based on the given information, Group A ran the least miles.

according to the general equation probability, if p(A∩B) =3/7 and p(B)= 7/8 , what is P(A\B)?

Answers

The probability of event A occurring given that event B has not occurred (P(A\B)) is 0.

To find P(A\B), we need to calculate the probability of event A occurring given that event B has not occurred. In other words, we want to find the probability of A happening when B does not happen.

The formula to calculate P(A\B) is:

P(A\B) = P(A∩B') / P(B')

Where B' represents the complement of event B, which is the event of B not occurring.

Given that P(A∩B) = 3/7 and P(B) = 7/8, we can find P(A∩B') and P(B') to calculate P(A\B).

To find P(B'), we subtract P(B) from 1, since the sum of the probabilities of an event and its complement is always equal to 1.

P(B') = 1 - P(B)

      = 1 - 7/8

      = 1/8

Now, to find P(A∩B'), we need to subtract P(A∩B) from P(B'):

P(A∩B') = P(B') - P(A∩B)

        = 1/8 - 3/7

        = 7/56 - 24/56

        = -17/56

Since the probability cannot be negative, we can conclude that P(A∩B') is 0.

Finally, we can calculate P(A\B) using the formula:

P(A\B) = P(A∩B') / P(B')

      = 0 / (1/8)

      = 0

Therefore, the probability of event A occurring given that event B has not occurred (P(A\B)) is 0.

for more such question on probability visit

https://brainly.com/question/251701

#SPJ8

joan’s finishing time for the bolder boulder 10k race was 1.81 standard deviations faster than the women’s average for her age group. there were 410 women who ran in her age group. assuming a normal distribution, how many women ran faster than joan? (round down your answer to the nearest whole number.)

Answers

To determine the number of women who ran faster than Joan, we need to calculate the percentage of women who were slower than her and then apply that percentage to the total number of women in her age group.

Given that Joan's finishing time was 1.81 standard deviations faster than the women's average for her age group, we can use the properties of a normal distribution to find the corresponding percentage.

Since Joan is faster than the average, her finishing time would fall in the top portion of the distribution. Using a standard normal distribution table or a calculator, we can find the percentage of data below her finishing time. The Z-score associated with 1.81 standard deviations is approximately 0.9641, which corresponds to a percentage of 96.41%.

This means that approximately 96.41% of the women in her age group ran slower than Joan. To find the number of women who ran faster, we subtract this percentage from 100%: 100% - 96.41% = 3.59%.

To determine the number of women, we multiply the percentage by the total number of women in her age group: 3.59% * 410 = 14.709.

Rounding down to the nearest whole number, we can conclude that approximately 14 women ran faster than Joan.

Please answer ASAP I will brainlist

Answers

The result of the row operation on the matrix is given as follows:

[tex]\left[\begin{array}{cccc}1&0&0&8\\0&8&0&3\\0&0&5&6\end{array}\right][/tex]

How to apply the row operation to the matrix?

The matrix in this problem is defined as follows:

[tex]\left[\begin{array}{cccc}2&0&0&16\\0&8&0&3\\0&0&5&6\end{array}\right][/tex]

The row operation is given as follows:

[tex]R_1 \rightarrow \frac{1}{2}R_1[/tex]

The first row of the matrix is given as follows:

[2 0 0 16]

The meaning of the operation is that every element of the first row of the matrix is divided by two.

Hence the resulting matrix is given as follows:

[tex]\left[\begin{array}{cccc}1&0&0&8\\0&8&0&3\\0&0&5&6\end{array}\right][/tex]

More can be learned about matrices at https://brainly.com/question/2456804

#SPJ1

Afiq. Bala and Chin played a game of marbles. Before the game, Bala had fewer marbles than Afig and Chinhad?
- as many marbles as Bala.
After the game, Balahad lost 20% of his marbles to Chinwhile Afig had lost
3
of his marbles to Chin. Chingained 105 marbles at the end of the
game.
(a)How many marbles didChinhave after the game?
(b)After the game, the 3 children each bought another 40 marbles. How manymarbles did the 3 children have altogether?

Answers

(a) Chin had 93.1 marbles after the game.

(b) The three children had a total of 271.44 marbles altogether.

Let's break down the problem step by step to find the answers:

Initial marbles

Before the game:

Let's assume Afiq had x marbles.

Bala had 1/6 fewer marbles than Afiq, so Bala had (x - 1/6x) marbles.

Chin had 3/5 as many marbles as Bala, so Chin had (3/5)(x - 1/6x) marbles.

After the game

After the game, Bala lost 20% of his marbles to Chin, so he has 80% (or 0.8) of his initial marbles remaining.

Afiq lost 2/3 of his marbles to Chin, so he has 1/3 (or 0.33) of his initial marbles remaining.

Calculating the marbles

(a) How many marbles did Chin have after the game?

To find Chin's marbles after the game, we add the marbles gained from Bala to Chin's initial marbles and the marbles gained from Afiq to Chin's initial marbles.

Chin's marbles = Initial marbles + Marbles gained from Bala + Marbles gained from Afiq

Chin's marbles = (3/5)(x - 1/6x) + 0.8(x - 1/6x) + 0.33x

Chin's marbles = (3/5)(5x/6) + 0.8(5x/6) + 0.33x

Chin's marbles = (3/6)x + (4/6)x + 0.33x

Chin's marbles = (7/6)x + 0.33x

We are given that Chin gained 105 marbles, so we can equate the equation above to 105 and solve for x:

(7/6)x + 0.33x = 105

(7x + 2x) / 6 = 105

9x / 6 = 105

9x = 105 * 6

x = (105 * 6) / 9

x = 70

Substituting the value of x back into the equation for Chin's marbles:

Chin's marbles = (7/6)(70) + 0.33(70)

Chin's marbles = 10(7) + 0.33(70)

Chin's marbles = 70 + 23.1

Chin's marbles ≈ 93.1

Therefore, Chin had approximately 93.1 marbles after the game.

(b) After the game, the 3 children each bought another 40 marbles. To find the total number of marbles the 3 children have altogether, we need to sum up their marbles after the game and the additional 40 marbles for each.

Total marbles = Afiq's marbles + Bala's marbles + Chin's marbles + Additional marbles

Total marbles = 0.33x + 0.8(x - 1/6x) + (7/6)x + 40 + 40 + 40

Total marbles = 0.33(70) + 0.8(70 - 1/6(70)) + (7/6)(70) + 120

Total marbles = 23.1 + 0.8(70 - 11.7) + 81.7 + 120

Total marbles = 23.1 + 0.8 × 58.3 + 201.7

Total marbles = 23.1 + 46.64 + 201.7

Total marbles = 271.44

The three children had a total of 271.44 marbles altogether.

for such more question on marbles

https://brainly.com/question/31043586

#SPJ8

Question

Afiq. Bala and Chin played a game of marbles. Before the game, Bala had 1/ 6 fewer marbles than Afig and Chinhad 3/5 as many marbles as Bala.

After the game, Balahad lost 20% of his marbles to Chinwhile Afig had lost

2/3 of his marbles to Chin. Chingained 105 marbles at the end of the

game.

(a)How many marbles didChinhave after the game?

(b)After the game, the 3 children each bought another 40 marbles. How manymarbles did the 3 children have altogether?

Question #1
Solve for x
E
16x9
D
C
45°

Answers

Answer:

[tex]x = \frac{3\pi}{64} +\frac{9}{16}[/tex]

Step-by-step explanation:

We have

∠D = 45° = 45* π/180 radians = π/4 radians - eq(1)

big arc + small arc = 2π

small arc = 16x - 9

⇒ big arc = 2π - small arc

big arc = 2π - 16x + 9

[tex]\angle D = \frac{big \;arc - small \;arc}{2}[/tex]

[tex]\angle D = \frac{2\pi - 16x + 9 - 16x +9}{2}\\\\= \angle D = \frac{2\pi - 32x + 19 }{2}\\\\\angle D = \pi - 16x + 9[/tex]

Equating with eq(1)

π - 16x + 9 = π/4

⇒ 16 x = π - (π/4) +9

⇒ 16 x = (3π/4) +9

⇒ [tex]x = \frac{1}{16} (\frac{3\pi}{4} +9)[/tex]

[tex]x = \frac{3\pi}{64} +\frac{9}{16}[/tex]

two points A and B, due to two spheres X and Y 4.0m apart, that are carrying charges of 72mC and -72mC respectively. Assume constant of proportionality as 9×10^9Nm²/C². Find the electric field strength at points A and B due to each spheres presence​

Answers

Point B: Electric field strength due to sphere X = 2073.6 NC⁻¹ and Electric field strength due to sphere Y = -2073.6 NC⁻¹.

data: Spheres X and Y are 4.0 m apart. The charge on sphere

X = + 72 mC = 72 × 10⁻³ C.

The charge on sphere

Y = -72 mC = -72 × 10⁻³ C.

The constant of proportionality = 9 × 10⁹ Nm²/C².

The formula to calculate the electric field strength due to a point charge is

E = k q / r²

where E is the electric field strength, k is the Coulomb's constant (= 9 × 10⁹ Nm²/C²), q is the magnitude of the charge, and r is the distance from the charge.The electric field due to sphere X at point A is

EaX = [tex]k q / r²where r = 4.0 m, q = + 72 × 10⁻³ CSo, EaX = 9 × 10⁹ × 72 × 10⁻³ / (4.0)²EaX = 9 × 9 × 2 × 2 × 2 × 2 / 10[/tex]EaX = 2592 / 10EaX = 259.2

NC⁻¹The electric field due to sphere Y at point A is

[tex]EaY = k q / r²where r = 4.0 m, q = -72 × 10⁻³ CSo, EaY = 9 × 10⁹ × 72 × 10⁻³ / (4.0)²EaY = -9 × 9 × 2 × 2 × 2 × 2 / 10EaY = -2592 / 10EaY = -259.2[/tex]

NC⁻¹The electric field due to sphere X at point B is

[tex]EbX = k q / r²where r = 4.0 m, q = + 72 × 10⁻³ C + 72 × 10⁻³ C = 144 × 10⁻³ C.So, EbX = 9 × 10⁹ × 144 × 10⁻³ / (4.0)²EbX = 9 × 9 × 4 × 4 × 4 × 4 / 10EbX = 20736 / 10EbX = 2073.6[/tex]

NC⁻¹The electric field due to sphere Y at point B is

[tex]EbY = k q / r²where r = 4.0 m, q = -72 × 10⁻³ C - 72 × 10⁻³ C = -144 × 10⁻³ C. So, EbY = 9 × 10⁹ × -144 × 10⁻³ / (4.0)²EbY = -9 × 9 × 4 × 4 × 4 × 4 / 10EbY = -20736 / 10EbY = -2073.6 NC⁻¹[/tex]

Therefore, the electric field strength at points A and B due to each sphere's presence are: Point A: Electric field strength due to sphere X = 259.2 NC⁻¹ and Electric field strength due to sphere Y = -259.2 NC⁻¹.

For more question sphere

https://brainly.com/question/28883242

#SPJ8

Ship A receives a distress signal from the northeast, and ship B receives a distress
signal from the same vessel from the west. At what location is the vessel in distress
located? Describe how you arrived at your conclusion using complete sentences. You
must show all work in order to receive credit. (10 points)
3
2
A
NE
12pt
13
W
B
Edit View Insert Format Tools
Paragraph
B T
Table
U
D

Answers

The vessel in distress is located at (-x, y), with the exact coordinates depending on the specific distances and positions of ships A and B.

To determine the location of the vessel in distress, we can analyze the information given about the distress signals received by ships A and B.

Ship A received a distress signal from the northeast, while Ship B received a distress signal from the west.

Let's consider the compass directions:

Northeast (NE) is a direction that lies between north and east.

West (W) is a direction perpendicular to both north and south.

From this information, we can deduce that the vessel in distress must be located at the intersection of the northeast and west directions.

To find this intersection point, we can draw a diagram or use a coordinate system. Let's assume the origin (0,0) represents the starting point of both ships A and B.

Based on the given information, we know that ship A received a distress signal from the northeast. This means that the vessel in distress must be located in the direction of the positive x-axis (east) and the positive y-axis (north) from the origin.

On the other hand, ship B received a distress signal from the west. This indicates that the vessel in distress must be located in the direction of the negative x-axis (west) from the origin.

Combining these two pieces of information, we can conclude that the vessel in distress is located at the point where the positive y-axis (north) intersects with the negative x-axis (west). In coordinate notation, this point can be represented as (-x, y), where x and y are positive values.

Therefore, the vessel in distress is located at (-x, y), with the exact coordinates depending on the specific distances and positions of ships A and B.

for such more question on vessel in distress

https://brainly.com/question/22920224

#SPJ8

The results of an analysis, on the makeup of garbage, done by the Environmental Protection Agency was published in
1990. Some of the results are given in the following table, which for various years gives the number of pounds per
person per day of various types of waste materials.
Waste materials
Glass
Plastics
Metals
Paper
1960
0.20
0.01
0.32
0.91
1970
0.34
0.08
0.38
1.19
1980
0.36
0.19
0.35
1.32
1988
0.28
0.32
0.34
1.60
For metal, calculate the average rate of change between 1980 and 1988. Then interpret what this value means.

a. From 1980 to 1988, the number of pounds of c. From 1980 to 1988, the number of pounds of
metal per person per day decreased by
metal per person per day decreased by
0.125 per year.
0.00125 per year.
b. From 1980 to 1988, the number of pounds d. From 1980 to 1988, the number of pounds
of metal per person per day decreased by
0.071 per year.
of metal per person per day increased by
0.01 per year.

Answers

The average rate of change for the number of pounds of metal per person per day between 1980 and 1988 is -0.00125 pounds per year.

To calculate the average rate of change for the number of pounds of metal per person per day between 1980 and 1988, we need to find the difference in the values and divide it by the number of years.

In 1980, the pounds of metal per person per day was 0.35, and in 1988, it was 0.34. The difference between these values is -0.01.

The number of years between 1980 and 1988 is 1988 - 1980 = 8 years.

Now, we can calculate the average rate of change:

Average rate of change = (Change in pounds of metal) / (Number of years)

= (-0.01) / 8

= -0.00125

The average rate of change for the number of pounds of metal per person per day between 1980 and 1988 is -0.00125 pounds per year.

Interpretation:

The negative value of the average rate of change (-0.00125) indicates that there was a decrease in the number of pounds of metal per person per day from 1980 to 1988.

Specifically, on average, there was a decrease of approximately 0.00125 pounds per year.

This suggests that there was a declining trend in the use or disposal of metal waste during this period.

It could indicate improvements in recycling or waste management practices, or a shift in consumer behavior towards reducing metal waste.

For more such questions on rate

https://brainly.com/question/25537936

#SPJ8

Let A be the point (7,4) and D be (-5, -3). What is the length of the shortest path ABCD, where B is a point (x, 2) and C is a point (x,0)? This path consists of three connected segments, with the middle one vertical.

Answers

The length of the shortest path ABCD is 7 units.

To find the length of the shortest path ABCD, we need to determine the coordinates of points B and C and then calculate the distances between these points.

Given that B has a y-coordinate of 2, it lies on a horizontal line. Therefore, the y-coordinate of B is 2, and the x-coordinate is the same as the x-coordinate of point A, which is 7. So, B is the point (7, 2).

Similarly, C lies on a vertical line, and its x-coordinate is the same as the x-coordinate of point D, which is -5. So, C is the point (-5, 0).

Now, we can calculate the distances between the points. The distance between A and B can be found using the distance formula:

AB = √[tex]((x2 - x1)^2 + (y2 - y1)^2[/tex])

Substituting the coordinates of A and B, we have:

AB = √[tex]((7 - 7)^2 + (2 - 4)^2) = √(0^2 + (-2)^2[/tex]) = √4 = 2

The distance between B and C is simply the difference in their y-coordinates:

BC = |y2 - y1| = |2 - 0| = 2

Finally, the distance between C and D can be calculated using the distance formula:

CD = √[tex]((-5 - (-5))^2 + (0 - (-3))^2)[/tex] = √[tex](0^2 + 3^2)[/tex] = √9 = 3

Therefore, the length of the shortest path ABCD is the sum of the distances AB, BC, and CD:

Shortest path ABCD = AB + BC + CD = 2 + 2 + 3 = 7

For more such questions on shortest path visit:

https://brainly.com/question/31911286

#SPJ8

Other Questions
A- Using Hierarchical Task Analysis Please explain how you need plans to describe how to perform each subtask? 0. In order to borrow a book from the library1. go to the library2. find the required book 2.1 access library catalogue 2.2 access the search screen 2.3 enter search criteria 2.4 identify required book 2.5 note location3. go to correct shelf and retrieve book 4. take book to checkout counterplan 0: do 1-3-4. If book isnt on the shelf expected, do 2-3-4.plan 2: do 2.1-2.4-2.5. If book not identified do 2.2-2.3-2.4.B- Analyze the following task using the Hierarchical Task Analysis method (by writing the textual notation and drawing the tree).Task: writing a letter and preparing it for posting.1. : Write letter and prepare for posting2. 1: Prepare for writing3. 1.1: Get paper4. 1.2: Get envelope5. 1.3: Get pen6. 1.4: Get address book (not explicitly stated, but clearly necessary)7. 2: Write letter8. 2.1: Write own address9. 2.2: Write addressee's address10. 2.3: Write date and "Dear..."11. 2.4: Write body text of letter12. 2.5: Sign off13. 3: Prepare envelope14. 3.1: Write name on envelope15. 3.2: Write address on envelope16. 4: Put letter in envelope17. 4.1: Fold letter18. 4.2: Place letter into envelope19. 4.3: Seal envelopeAgain, we need plans to describe how to perform each subtask:20. Plan 1: Do 1.1, 1.2, 1.3 and 1.4 in any order 21. Plan 2: Do 2.1 then 2.2 then 2.3 then 2.4 then 2.5 22. Plan 3: Do 3.1 then 3.2 23. Plan 4: Do 4.1 then 4.2 then 4.3. Last Supper PaintingWhat is the meaning of the work of the last supper painting?What is the works purpose of the last supper painting? Why was the work was created?What do you like about the work of the last supper painting? An AC power source with frequency of 250 Hz is connected to an inductor of 50 mH, a resistor of 70 ohms, and a capacitor of 24 microfarads. The RMS voltage of the power source is 15 V. (a) Calculate the maximum current in the circuit. (b) How could we change one or more of these quantities so that the maximum current is a large as possible. Identify the specific numerical changes required to do this. Design a dc-dc converter to produce a -24 V output from a source that varies from 12 to 48 V. the inductor current ripple is less 20 % and output voltage ripple is less than 20%, and the load is a 10 resistor and inductor current should be continues. You are asked to find:1. The values of L and C that guarantee the given specifications.2. The inductor max and min current.3. Build a Matlab Simulink model to compare the specifications with the simulation results. Basic System Analysis Given the transfer function, T(s) = Create three for separate plots for (1) The pole-zero map for the above transfer function a. Do not use a grid b. Set the x-limits from -5 to +2 c. Set the y-limits from -5 to +5 (2) The impulse response using the MATLAB impulse() function a. Add a grid (3) The step response using the MATLAB step() function a. Add a grid Note, to avoid "overwriting" your previous figure, you'll need to use the MATLAB figure() function prior to creating a new plot. As part of this problem, answer the following question. Embed your answers in your MATLAB script as described below. Q1. Based on the transfer function's pole locations, is the system stable? Justify your answer. Q2. Based on the transfer function's pole locations, how long will it take for the output to reach steady- state conditions? Justify your answer. Does this match what you see in the step-response? 3 (s + 1)(s + 3) Gold NuggetYou must create a class to represent a Gold Nugget. If the Iceman picks up a GoldNugget, he can then drop it into the oil field at a later time to bribe a Protester (of eithertype). Here are the requirements you must meet when implementing the Gold Nuggetclass.What a Gold Nugget object Must Do When It Is Created35When it is first created:1. All Gold Nuggets must have an image ID of IID_GOLD. 2. All Gold Nuggets must have their x,y location specified for them when they arecreated.3. All Gold Nuggets must start off facing rightward.4. A Gold Nugget may either start out invisible or visible this must be specified bythe code that creates the Nugget, depending on the context of its creation. Nuggetsburied within the Ice of the oil field always start out invisible, whereas Nuggetsdropped by the Iceman start out visible.5. A Gold Nugget will either be pickup-able by the Iceman or pickup-able byProtesters, but not both. This state must be specified by the code that creates theGold Nugget object.6. A Gold Nugget will either start out in a permanent state (where they will remainin the oil field until they are picked up by the Iceman or the level ends) or atemporary state (where they will only remain in the oil field for a limited numberof ticks before disappearing or being picked up by a Protester). This state must bespecified by the code that creates the Gold Nugget object.7. Gold Nuggets have the following graphic parameters:a. They have an image depth of 2 behind actors like Protesters, but aboveIceb. They have a size of 1.0What the Gold Nugget Object Must Do During a TickEach time the Gold Nugget object is asked to do something (during a tick):1. The object must check to see if it is currently alive. If not, then its doSomething()method must return immediately none of the following steps should be performed.2. Otherwise, if the Gold Nugget is not currently visible AND the Iceman is within aradius of 4.0 of it ( what to say for spanish dba 3.06, 7TH GRADE Consider the standard lumped element model of coaxial cable transmission line: -www -OLD R G + with "per unit length" values for the model parameters of R = 5.22/m, L = 0.4 pH/m, G = 12.6 ms2-1/m, and C = 150 pF/m. Your supervisor has asked you to check a 3m length of the coaxial cable above using a time-domain reflectometer. This device sends a very short pulse along the transmission line and looks for returning, reflected pulses which could indicate a break or other problem in the transmission line. Calculate the phase velocity in the line of a short pulse with a carrier frequency of 6 GHz, and use that to determine how long you expect to wait before you see the returning pulse that has reflected off the far end of the cable (which has been left unterminated, i.e., open). Please include your working. Please helpppEnders Game book What were Enders achievements at the battle school where he consistently outperforms his peers? (Please include page number and chapter) Thank youuuu!!! Template DNA 3'- CAC TAC CCT TCT CGG ACG TAG CGT TCA ACT CCC-5' A) Met-Cys-Gly-Arg-Ala-Ala-Cys-lle-Ala B) Met-Ala-Cys-lle-Gly-Arg-Ala-Ser C) Met-Ala-Ser-Gly-Arg-Ala-Cys-lle- D) Met-Leu-Pro-Arg-Gly-Arg-Ala-Cys E) Met-Gly-Arg-Ala-Cys-lle-Ala-Sera)Ab)Bc)Cd)De)E Who is the Titan who refused to tell Zeus the name of the Goddess who was to give birth to a son that would overshadow his father? Dionysus Poseidon Chronus Prometheus Calculatoralloweda) Calculate the cross-sectional area of this cylinder.b) Calculate the volume of this cylinder.Give your answers to 1 d. p.Bookwork code: R9617 cm15 cm Find the general solution of the differential equation. y(4) + 2y" +y = 3 + cos(3t). NOTE: Use C, C2, C3 and c4 for arbitrary constants. y(t) = = QUESTION 45 We use the when we estimate the likelihood of an event based on how much it stands out in our mind. O A. Availability Heuristic B. Belief Perseverance C. Confirmation Bias D. Overconfidenc Which of the following does not have to be checked during an audit of an existing wireless system. Select one: A. Network redundancy B. Age C. Condition X Incorrect D. Transmitter output E. Type of antenna Does the United States have a moral obligation to resettle refugees? Under what circumstances would the country not have such an obligation? Is there anything wrong in offering unauthorized immigrants "a path to citizenship"? Explain. Write at least 250 words. Explain what each of the following indicates about a reaction. a. H : b. S : c. G : What is the solution to this equation? X - 15= -6 If F(x,y) is defined as F(x,y)-5xy - (2x-1) +(5+y) a- Use the backward difference approximation of the second derivative to calculate the second derivative of F(x) at x-2. Note that y is a constant and have a value of 1. Use a step size of 0.5. (11% b- What's the absolute relative true error of (a)? (7% e-Use the central difference scheme of the first derivative to calculate the derivative of F(y) at y-2. Note that x is a constant and have a value of 2.Use a step size of 1. (119 d-What's the absolute relative true error of (c)? (7% Ethylene is compressed in a stationary and reversible way so that PV^1.5 = cte. The gas enters at 15 psia and 90F and leaves at 1050 psia. Determine the final temperature, compression work, heat transfer, and enthalpy change.