which energy difference in the energy profile below corresponds to the activation energy for the forward reaction?

Sodium phosphate and calcium chloride reacts to form sodium chloride and calcium phosphate. If we have 379.4 grams of calcium chloride and an excess of sodium phosphate, we can make 353.3g of calcium phosphate.

The balanced chemical equation of sodium phosphate and calcium chloride to form sodium chloride and calcium phosphate is given as

2Na₃PO₄ + 3CaCl₂ → 6NaCl + Ca₃(PO₄)₂

We will convert given grams of calcium chloride into moles.

Using mol ratio, the moles of calcium phosphate are calculated and converted to grams as:

we know that,

Molar mass of calcium chloride is 110.98 gram /mol

And molar mass of calcium phosphate is 310 gram/mol.

By using dimensional analysis we get:

=379.4 g CaCl₂ (1 mol CaCl₂/ 110.98gCaCl₂)(1 molCa₃(PO₄)₂/3 molCaCl₂ )(310gCa₃(PO₄)₂/1 mol Ca₃(PO₄)₂)

=353.3 g Ca₃(PO₄)₂

Thus, 353.3 grams of calcium phosphate can be formed from the reaction

To know more about calcium phosphate here

https://brainly.com/question/2396369

#SPJ4

The complete question should be:

Sodium phosphate and calcium chloride react to form sodium chloride and calcium phosphate. If you have 379.4 grams of calcium chloride and an excess of sodium phosphate, how much calcium phosphate can you make?

Answer:

A Lewis dot structure is like a simplified Bohr-Rutherford model. The Lewis Dot diagram contains the element symbol with dots representing electrons. The only electrons shown are those on the outer energy level or valence electrons.

Asbestos is not a widely used dye, pesticide, or radioactive material. As mentioned earlier, asbestos is a group of naturally occurring fibrous minerals that were widely used in construction and insulation materials due to their heat resistance and durability.

However, prolonged exposure to asbestos fibres can lead to serious health problems, including lung cancer, mesothelioma, and asbestosis. These health risks are due to the fact that asbestos fibres are small and can be inhaled, causing damage to the lungs and respiratory system. Therefore, asbestos is classified as an environmental carcinogen, which means it is a substance that can cause cancer or promote the growth of cancer cells in the environment.

The construction company's use of asbestos on job sites could potentially have exposed workers and others to these health risks, which is why the use of asbestos has been heavily regulated and phased out in many countries around the world.

To know more about asbestos, visit the link given below:

https://brainly.com/question/8853025

#SPJ4  

A. Balanced reactions and reaction type is given below as asked in question above :

C₂H₂ + 5 O₂ → 4 CO₂ + 2 H₂O (combustion)

2 NaOH + Cl₂ → NaCl + NaClO + H₂O (double-displacement)

Fe + 2 HCl → FeCl₂ + H₂ (single-displacement)

P₄ + 5 O₂ → P₄O₁₀ (synthesis)

2 Fe + 2 NaOH + H₂O → 2 Fe(OH)₂ + 2 Na⁺ (double-displacement)

2 NaHCO₃ → 2 NaNO₃ + H₂O + 2 CO₂ (decomposition)

B. Reaction type:

3 Na₃PO₄ + K₃PO₄ → 6 NaOH + 2 K₃PO₄ (double-displacement)

PbSO₄ + Fe → Pb + FeSO₄ (single-displacement)

B₂O₃ + 6 HF → 2 BF₃ + 3 H₂O (double-displacement)

2 Al + 6 HCl → 2 AlCl₃ + 3 H₂ (single-displacement)

2 H₂O₂ → O₂ + 2 H₂O (decomposition)

Fe(OH)₃ + 3 NaCl → FeCl₃ + 3 NaOH (double-displacement)

To know more about double-displacement, visit:

https://brainly.com/question/29307794

#SPJ1

When the second ionization energy of Mg is 1445 kj/mol, then the first ionization energy is less than 1445 kj/mol. Thus, (option b) less than 1445 kj/mol is the correct answer.

Ionization energy is the minimum amount of energy required to remove one mole of electrons from a mole of gaseous atoms or ions in the ground state (at zero degrees Kelvin).

The ionization energy of a given element increases as the nuclear charge or atomic number increases, indicating that the electrons are being held more tightly.

1. Ionization energy refers to the energy required to remove an electron from an atom or ion.

2. The first ionization energy is the energy needed to remove the first electron, while the second ionization energy is the energy needed to remove the second electron.

3. In general, the ionization energy increases as electrons are removed, because the remaining electrons are more strongly attracted to the positively charged nucleus.

4. Since the second ionization energy of Mg is 1445 kJ/mol, the first ionization energy must be less than this value, as it takes less energy to remove the first electron.

to know more about ionization energy refer here:

https://brainly.com/question/28385102#

#SPJ11

The per cent error for the calculation is 18.95%, which is approximately equal to 19%. Thus, the option (none of the above) is the correct answer.

In the following question, among the conditions given, The volume of a cylinder calculated by a student = 1.24 L

The actual volume of the cylinder = 1.53 L

The per cent error can be calculated as follows:

Per cent error = (|Actual value − Measured value|/Actual value)×100Percent error

= (|1.53 L − 1.24 L|/1.53 L)×100Percent error

= (0.29 L/1.53 L)×100

Percent error = 18.95%

Therefore, it is said that the calculation is 18.95%, Thus, the option (none of the above) is the correct answer.

For more such questions on percent error

https://brainly.com/question/5493941

#SPJ11

H3P(aq) is the chemical formula for phosphoric acid, which is a mineral acid commonly used in the production of fertilizers and food additives.

What is Chemical Name?

A chemical name is the name given to a specific chemical compound that describes the type and number of atoms present in the compound. It is different from a chemical formula, which uses chemical symbols and subscripts to indicate the number and type of atoms in a molecule or formula unit of a compound.

Phosphoric acid (H3P) is a colorless, odorless, and highly soluble inorganic acid that contains one phosphorus atom, three hydrogen atoms, and four oxygen atoms. In aqueous solution, it dissociates to produce hydrogen ions (H+) and phosphate ions (H2PO4- and HPO42-). The chemical formula H3P(aq) is used to indicate that the phosphoric acid is dissolved in water to form an aqueous solution.

Learn more about Chemical Name from the given link

https://brainly.com/question/29594386

#SPJ1

The correct option is A and E.  A short-stem funnel can be used for vacuum filtration. and the dimensions of the funnel need to be adjusted primarily based at the quantities being treated.

Filtration is a commonly used separation technique in chemistry that involves the physical separation of solid particles from a liquid or gas by passing the mixture through a filter medium. The filter medium is usually a porous material, such as paper, glass wool, or a membrane, that allows the liquid or gas to pass through while trapping the solid particles.

Filtration is used in a wide range of applications, including water purification, air purification, and the separation of solid and liquid phases in chemical reactions. In analytical chemistry, filtration is often used to separate solid precipitates from a solution to isolate and analyze the desired product. Filtration can be performed using a variety of different filter media and techniques, including gravity filtration, vacuum filtration, and pressure filtration.

To learn more about Filtration visit here:

brainly.com/question/31326542

#SPJ4

Complete Question:

which statements are correct regarding a vacuum filtration? (take a look at all that practice.) institution of answer choices

A). a brief-stem funnel may be used for a vacuum filtration.

B). the answer can not be too acidic or too basic while using filter paper.

C). no filter out paper is wanted whilst the usage of a hirsch funnel.

D). vacuum filtration works nicely with boiling solutions.

E). the dimensions of the funnel need to be adjusted primarily based at the quantities being treated.

Paraquat damages human tissue by generating oxygen radicals using electrons diverted from complex I of the respiratory chain.

Paraquat is known to damage human tissue by generating oxygen radicals using electrons diverted from complex I of the respiratory chain, competing with ferredoxin for electrons from the PSI reaction center, reducing nitrogen by using electrons attached to paraquat, and interfering with PSI function. Paraquat is a toxic herbicide that affects the respiratory system, lungs, kidneys, liver, and other organs, and it is linked to Parkinson's disease. Paraquat causes damage to cells by generating oxygen radicals using electrons diverted from complex I of the respiratory chain, competing with ferredoxin for electrons from the PSI reaction center, reducing nitrogen by using electrons attached to paraquat, and interfering with PSI function. The toxicity of Paraquat is related to the continuous cycle of oxidants generated by paraquat in cells, which causes tissue damage and cell death.

To know more about Paraquat

brainly.com/question/20388070

#SPJ11

21.167 ml of 0.0861 m KOH are required to titrate 25.0 ml of 0.0729 m HCL to the equivalence point.

Neutralization reaction is defined as a chemical reaction in which an acid and a base reacts with each other. Basically it is explained as when a strong acid reacts with a strong base the resultant salt is neither acidic nor basic in nature which is called neutral. The balanced chemical equation for the neutralization reaction between KOH and HCL  can be written as,

KOH +HCL → KCL + H₂O

The equivalence point of a chemical reaction is defined as the point at which chemically equivalent quantities of reactants of the reaction have been mixed together. For an neutralization reaction the equivalence point is where the moles of acid and the moles of base would neutralize each other as per the chemical reaction.

Moles of KOH is equals to moles of HCL.

Equivalent point of KOH =  0.0729 m * 25.0 ml / 0.0861 m

                                           = 21.167 ml

To learn more about equivalence point

https://brainly.com/question/2496608

#SPJ4

The pH of the buffer solution is approximately 7.65.

To calculate the pH of a buffer solution, first determine the concentration of [tex]KH_{2} PO_{4}[/tex] and [tex]Na_{2} HPO_{4}[/tex].

Calculate moles of [tex]KH_{2} PO_{4}[/tex] and [tex]Na_{2} HPO_{4}[/tex]:

- [tex]KH_{2} PO_{4}[/tex]: (30.0 g) / (136.09 g/mol) = 0.2203 mol

- [tex]Na_{2} HPO_{4}[/tex]: (49.0 g) / (141.96 g/mol) = 0.3451 mol

Calculate concentrations in the 1.00 L solution:

- [[tex]KH_{2} PO_{4}[/tex]] = 0.2203 mol / 1.00 L = 0.2203 M

- [[tex]Na_{2} HPO_{4}[/tex]] = 0.3451 mol / 1.00 L = 0.3451 M

Use the Henderson-Hasselbalch equation:

pH = pKa + log ([A-]/[HA])

- For [tex]H_{2} PO_{4}[/tex]-/HPO4²-, the pKa = 7.21.

- pH = 7.21 + log (0.3451/0.2203)

Calculate the pH:

- pH ≈ 7.21 + 0.438 = 7.65

The pH of the buffer solution is approximately 7.65.

Know more about buffer solution    here:

https://brainly.com/question/27371101

#SPJ11

Answer: carbon dioxide

Explanation:During separation of air by fractional distillation method, air undergoes compression by increasing the pressure and cooling by decreasing the temperature. After this point air gets converted into a liquid state and the carbon dioxide present in the air, converted into a solid form which is known as dry ice and separated at this point of time.

The original concentration of the [tex]Li^{+}[/tex] calculated is 0.99 m M when a sample of the serum which gave a reading about the 388 units for the intensity of the 671 nm of the red emission light.

We have to determine the original concentration of the [tex]Li^{+}[/tex] in serum from the given sample.

initial concentration, I(x) = 484

484 = k [[tex]Li^{+}[/tex]]

The initial concentration of the lithium ion + the standard of concentration

=> I (x + s) = 978

=> 978 = k x { [[tex]Li^{+}[/tex]  standard] * (V standard/ V total) } +k { [[tex]Li^{+}[/tex] serum] * (V initial/ V total) }

=> 484 = k*[[tex]Li^{+}[/tex] serum],

=> 978 = k x { [11.1] * (1 mL/ 10 mL) } + 484 x (9 mL/ 10 mL)

k = 488.65

484 = 488.65 x [[tex]Li^{+}[/tex]]

[[tex]Li^{+}[/tex]] = 0.99 m M

To learn more about Concentration

https://brainly.com/question/28564792

#SPJ4

The shorthand notation using the noble gas inner core is:

Pb: [Xe] 4f^14 5d^10 6s^2 6p^2

The atomic number of lead (Pb) is 82, which means it has 82 electrons. To write the electron configuration of Pb, we first determine the electron configuration of the nearest noble gas, which is xenon (Xe) with the electron configuration [Kr] 4d^10 5s^2 5p^6.

We then add the remaining electrons for Pb:

Pb: [Xe] 4f^14 5d^10 6s^2 6p^2

Find more about electron configuration

brainly.com/question/3664948

#SPJ4

The relationship between the number of moles and volume is a fundamental concept in the study of gases and their behavior under various conditions.

The relationship between the number of moles (n) and volume (V) in a balloon can be described by the Ideal Gas Law, which states:

PV = nRT

Here, P represents pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature.

Therefore, the relationship between the number of moles (n) and volume (V) can be simplified to:

V = n (RT/P)

Since R, T, and P are constant values, the relationship between the number of moles (n) and volume (V) is directly proportional.

This means that as the number of moles in the balloon increases, the volume of the balloon also increases, and vice versa.  Similarly, if the number of moles in the balloon decreases, the balloon will contract, resulting in a decrease in volume.

Know more about Ideal Gas Law here :

brainly.com/question/27870704

#SPJ11

48.18 g of S8 were generated in this reaction. If 1 mole of Fe and 8 moles of S combine to form 8 moles of FeS.

The reaction's balanced chemical equation is 8 FeS (s) + S8 → 8 FeS. (s)

1 mole S8 divided by 8 moles FeS yields 0.1875 moles S8.

We must utilize S8's molar mass to convert moles to grams. S8 has the following molar mass: 8 32.06 g/mol = 256.48 g/mol

The mass of S8 that was involved in the reaction is as follows: 0.1875 moles S8 256.48 g/mol = 48.18 g S8 (rounded to two significant figures)

The response is 48.18 g.

To learn more about mass of product visit:

brainly.com/question/19694949

#SPJ9

A solution that has many ions in solution and turns pH paper orange is likely to be an acidic solution with a pH between 3 and 5.

The presence of many ions in solution indicates that the solution is likely to be a strong electrolyte, meaning that it contains a high concentration of ions that dissociate completely in water.

This could be due to the presence of a strong acid or a strong salt in the solution. The orange color on the pH paper indicates that the solution has a pH in the acidic range, which is consistent with the high concentration of H+ ions in an acidic solution.

Therefore, the solution can be classified as a strong acidic solution.

For more question on pH click on

https://brainly.com/question/172153

#SPJ11

Answer:

The most significant quantity of CO2 that can be produced:

The reaction's limiting reactant determines the maximum amount of carbon dioxide that can be generated. The limiting reactant is the reactant that is totally consumed in the reaction and dictates how much product may be generated. To identify the limiting reactant, compare the available quantities of glucose and oxygen and calculate the carbon dioxide that can be generated from each.

Glucose (C6H12O6) has a molar mass of 180.18 g/mol.

Oxygen (O2) has a molar mass of 32.00 g/mol.

Explanation:

We can compute the number of moles of each reactant using these values:

Moles of glucose = 9.91 g / 180.18 g/mol = 0.055 mol

Amount of oxygen moles = 15.2 g/32.00 g/mol = 0.475 mol

The reaction's balanced chemical equation is:

C6H12O6 + 6O2 + 6CO2 = C6H12O6 + 6H2O

One mole of glucose combines with six moles of oxygen to generate six moles of carbon dioxide, according to the balanced equation. As a result, the greatest quantity of carbon dioxide that may be generated from the given reactant quantities is:

The highest quantity of carbon dioxide that may be generated if glucose is the limiting reactant is: 0.055 mol glucose 6 mol CO2/mol glucose 44.01 g/mol CO2 = 16.93 g CO2

The highest quantity of carbon dioxide that may be generated if oxygen is the limiting reactant is: 0.475 mol oxygen 1 mol CO2/mol oxygen 44.01 g/mol CO2 = 20.89 g CO2

As a result, the maximum quantity of CO2 that may be produced is 16.93 g CO2 (when glucose is the limiting reactant).

The following is the formula for the limiting reactant:

To get the limiting reactant formula, we must compute the theoretical production of carbon dioxide for each reactant and compare the results. The limiting reactant is the one that produces the least quantity of carbon dioxide.

Based on glucose as the limiting reactant, the potential production of carbon dioxide is: 0.055 mol glucose 6 mol CO2/mol glucose 44.01 g/mol CO2 = 16.93 g CO2

Based on oxygen as the limiting reactant, the potential production of carbon dioxide is: 0.475 mol oxygen 1 mol CO2/mol oxygen 44.01 g/mol CO2 = 20.89 g CO2

As a result, glucose is the limiting reactant, with the formula C6H12O6.

The amount of extra reactant that remains:

Excess reactants are those that are not totally consumed in the reaction. To compute the quantity of surplus reactant left, we must first estimate how much oxygen interacts with glucose. According to the balanced equation, one mole of glucose combines with six moles of oxygen. As a result, the number of moles of oxygen reacting with glucose is:

6 mol O2/mol glucose = 0.055 mol glucose = 0.33 mol O2

The quantity of oxygen remaining after the reaction is as follows:

15.2 g of O2 - 0.33 mol of O2 32.00 g/mol = 4.76 g of O2.

As a result, when the reaction is complete, 4.76 g of oxygen remains as the surplus reactant.

https://brainly.com/question/31349677

To find the moles of the gas , we can use the ideal gas law. Which states -

[tex] \:\:\:\:\:\:\:\:\:\star\longrightarrow \sf \underline{PV=nRT} \\[/tex]

Where:-

As per question, we are given that-

Now that we have all the required values, so we can put them all in the Ideal gas law formula and solve for moles -

[tex] \:\:\:\:\:\:\:\:\:\star\longrightarrow \sf \underline{PV=nRT} \\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf 1.55 \times 58 = n \times 0.0821 \times 222\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf 89.9 = n \times 18.2262\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf n \times 18.2262 =89.9\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf n = \dfrac{89.9}{18.2262}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf n =4.9324......\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf \underline{n =4.93 \:moles }\\[/tex]

Therefore, 4.93 moles of gas will be occupied 58 L at a pressure of 1.55 atmospheres and a temperature of 222 k

The density of a cube that measures 72g and all sides of the cube measure 2cm is [tex]9000kg/m^3.[/tex]

Given the mass of cube (m) = 72g = 0.072kg

The length of side of cube (a) = 2cm = 0.02m

Let the density of cube = d

The density of a cube can be calculated by dividing the mass (in grams) by the volume (in cubic centimeters). The volume of a cube can be calculated by cubing the length of one side.

The volume of cube is measured as [tex](V) = a^3[/tex] then:

[tex]V = (0.02)^3 = 8 * 10^{-6}m^3[/tex]

We know that the density is calculated as mass per unit volume such that d = m/V

[tex]d = 0.072kg/8 * 10^{-6}m^3 = 9 *10^{3}kg/m^3[/tex]

To learn more about density click here https://brainly.com/question/29775886

#SPJ1

The equilibrium constant Kb for the reaction is 4.59 x 10^-10.

The equilibrium constant expression for the reaction between aniline and water is

Kb = [C6H5NH2][OH-] / [C6H5NH3+]

where [C6H5NH2] is the concentration of aniline, [OH-] is the concentration of hydroxide ions, and [C6H5NH3+] is the concentration of anilinium

The pOH of the solution can be calculated from the pH:

pH + pOH = 14

pOH = 14 - 8.82 = 5.1

The concentration of hydroxide ions can be calculated from the pOH:

pOH = -log[OH-]

[OH-] = 10^-5.18 = 6.91 x 10^-6 M

The concentration of aniline can be calculated from the molarity and volume of the solution:

n = C x V = 0.10 mol/L x 0.025 L = 2.5 x 10^-3 mol

[C6H5NH2] = n / V = 2.5 x 10^-3 mol / 0.025 L = 0.1 M

The concentration of anilinium ions can be calculated from the concentration of aniline and the concentration of hydroxide ions using the equilibrium constant expression:

Kb = [C6H5NH2][OH-] / [C6H5NH3+]

[C6H5NH3+] = [C6H5NH2][OH-] / Kb = (0.1 M)(6.91 x 10^-6 M) / Kb

Now we can use the equation for the ionization constant of water (Kw = [H+][OH-] = 1.0 x 10^-14) to find the concentration of H+ ions:

Kw = [H+][OH-] = (1.0 x 10^-14) M^2 = ([C6H5NH3+])([OH-]) = (0.1 M)(6.91 x 10^-6 M)

[H+] = sqrt(Kw / [OH-]) = sqrt(1.0 x 10^-14 / 6.91 x 10^-6) = 1.51 x 10^-5 M

pH = -log[H+] = -log(1.51 x 10^-5) = 4.82

The equilibrium constant Kb can be calculated from the expression:

Kb = [C6H5NH2][OH-] / [C6H5NH3+]

Kb = (0.1 M)(6.91 x 10^-6 M) / (1.51 x 10^-5 M) = 4.59 x 10^-10

To learn more about Equilibrium :

https://brainly.com/question/19340344

#SPJ11

The text makes clear that Johnson was always devoted to arithmetic by emphasizing her love of counting. a great deal, in size, scope, or importance.

Astronaut aspirants must hold a master's degree, typically in a STEM subject. Along with these requirements, you must successfully complete two years of training and the challenging NASA physical. As a scientist, engineer, or astronomer, you can work in space.

The minimum educational requirements for astronauts include a master's degree and two years of related job experience. A thousand hours of pilot-in-command experience is also an option. A very competitive and selective career path is becoming an astronaut.

To know more about Astronaut visit:

https://brainly.com/question/11244838

#SPJ1

The retention factor for the yellow spot is 0.2586.

Rf = Distance traveled with the aid of the compound / Distance traveled by the solvent the front

Rf = 1.5 cm / 5.8 cm = 0.2586

Retention factor (Rf) is a term used in chromatography, a laboratory technique used to separate and analyze mixtures of compounds. Rf is a dimensionless quantity that describes the migration of a particular compound relative to the solvent front in a chromatographic system.

In a typical chromatographic separation, the sample mixture is placed on a stationary phase, which is usually a solid or liquid that is immobilized on a solid support. The stationary phase is then contacted with a mobile phase, which is a liquid or a gas that flows over the stationary phase, carrying the sample compounds with it. The Rf value for a given compound is determined by dividing the distance the compound travels up the stationary phase by the distance the solvent front travels up the same phase.

To learn more about Retention factor visit here:

brainly.com/question/30914718

#SPJ4

The change in the number of moles of gas, Δn_gas, in a chemical reaction can be determined by comparing the total number of moles of gaseous reactants to the total number of moles of gaseous products.

To determine δn_gas (change in moles of gas) in a chemical reaction, follow these steps:

δn_gas = moles of gas (products) - moles of gas (reactants)
Remember to only consider the gaseous species when calculating δn_gas.

To know more about "Moles" refer here:

https://brainly.com/question/24191825#

#SPJ11

A slight decrease in first ionization energy upon going from p to s can be attributed to a screening effect or increased electron-electron repulsion.

What is ionization energy?

The energy required to remove an electron from a gaseous atom or ion is known as ionization energy. The amount of energy required to remove the most loosely bound electron from the gaseous atom or ion is referred to as the first ionization energy. Ionization energy is a physical property that varies with the atomic or ionic radius, the ionization potential, and the degree of electron-electron interaction.

A slight decrease in first ionization energy upon going from p to s can be attributed to what factor?

A screening effect or increased electron-electron repulsion is the factor that can be attributed to a slight decrease in first ionization energy when moving from p to s. As we go from left to right on the periodic table, the ionization energy rises. It occurs because the effective nuclear charge, or the number of protons in the nucleus minus the number of electrons between the nucleus and the valence electron, increases as we go from left to right.The electrons in the inner shells shield the valence electrons from the nucleus's positive charge. The first ionization energy of atoms with similar valence electron configuration decreases as we go down the periodic table. The electrons in the outermost orbital are further away from the nucleus and are more shielded from the attractive power of the nucleus as we go down the periodic table. As a result, less energy is required to remove the valence electron.

To know more about ionization energy click here:

brainly.com/question/1602374

#SPJ11

Answer:

A)  44.0 g of CO₂

Explanation:

Avogadro's number is a constant that represents the number of particles in one mole of a substance. It is defined as exactly 6.02214076 × 10²³ particles per mole.

To determine which quantity contains Avogadro's number of molecules, calculate the molar mass of each compound, then use the number of molecules formula to find the number of molecules of the substance.

[tex]\boxed{\begin{minipage}{7 cm}\underline{Number of molecules}\\\\$\dfrac{m}{M} \times 6.02214076 \times 10^{23}$\\\\where:\\\phantom{ww}$\bullet$ $M =$ molar mass.\\ \phantom{ww}$\bullet$ $m =$ mass of a substance (in grams)\\\end{minipage}}[/tex]

[tex]\hrulefill[/tex]

CO₂ is a chemical compound made up of molecules that each have one carbon atom (C) and two oxygen atoms (O₂).

Atomic mass of carbon is 12.011 amu.

Atomic mass of oxygen is 15.999 amu.

Therefore, the molar mass of CO₂ is:

= C + 2O

= 12.011 + 2 × 15.999

= 44.009 g/mol

Given there is 44.0 g of CO₂, the number of molecules of CO₂ is:

[tex]\implies \dfrac{44}{44.009}\times 6.02214076 \times 10^{23}=6.02 \times 10^{23}[/tex]

[tex]\hrulefill[/tex]

NH₃ is a chemical compound made up of molecules that each have one nitrogen atom (N) and three hydrogen atoms (H₃).

Atomic mass of nitrogen is 14.0067 amu.

Atomic mass of hydrogen is 1.00784 amu.

Therefore, the molar mass of NH₃ is:

= N + 3H

= 14.0067 + 3 × 1.00784

= 17.03022 g/mol

Given there is 20.0 g of NH₃, the number of molecules of NH₃ is:

[tex]\implies \dfrac{20}{17.03022}\times 6.02214076 \times 10^{23}=7.07 \times 10^{23}[/tex]

[tex]\hrulefill[/tex]

H₂O is a chemical compound made up of molecules that each have two hydrogen atoms (H₂) and one oxygen atom (O).

Atomic mass of hydrogen is 1.00784 amu.

Atomic mass of oxygen is 15.999 amu.

Therefore, the molar mass of H₂O is:

= 2H + O

= 2 × 1.00784 + 15.999

= 18.01468 g/mol

Given there is 9.01 g of H₂O, the number of molecules of H₂O is:

[tex]\implies \dfrac{9.01}{18.01468}\times 6.02214076 \times 10^{23}=3.01 \times10^{23}[/tex]

[tex]\hrulefill[/tex]

H₂SO₄ is a chemical compound made up of molecules that each have two hydrogen atoms (H₂), one sulphur atom (S) and four oxygen atoms (O).

Atomic mass of hydrogen is 1.00784 amu.

Atomic mass of sulphur is 32.065 amu.

Atomic mass of oxygen is 15.999 amu.

Therefore, the molar mass of H₂SO₄ is:

= 2H + S + 4O

= 2 × 1.00784 + 1 × 32.065 + 4 × 15.999

= 98.07668 g/mol

Given there is 108.0 g of H₂SO₄, the number of molecules of H₂SO₄ is:

[tex]\implies \dfrac{108.0}{98.07668}\times 6.02214076 \times 10^{23}=6.63 \times 10^{23}[/tex]

[tex]\hrulefill[/tex]

44.0 g of CO₂ = 6.02 × 10²³ molecules (3 s.f.)

20.0 g of NH₃ = 7.07 × 10²³ molecules (3 s.f.)

9.01 g of H₂O = 3.01 × 10²³ molecules (3 s.f.)

108.0 g of H₂SO₄ = 6.63 × 10²³ molecules (3 s.f.)

As Avogadro's number of molecules is 6.02 × 10²³ to three significant figures, the quantity that contains the same number of molecules is:

The quantity that contains Avogadro's number of molecules is 44.0 g of CO₂. Therefore, option A is correct.

Avogadro's number is a constant that represents the number of particles (atoms, molecules, ions, etc.) in one mole of a substance. It is equal to 6.022 × 10²³.

CO₂ (carbon dioxide) has a molar mass of approximately 44.01 g/mol. Therefore, 44.0 g of CO₂ corresponds to 1 mole of CO₂, which contains Avogadro's number of molecules.

NH₃ (ammonia) has a molar mass of 17.03 g/mol. Therefore, 20.0 g of NH₃ corresponds to 1.17 moles of NH₃, which is less than Avogadro's number of molecules.

H₂O (water) has a molar mass of 18.02 g/mol. Therefore, 9.01 g of H₂O corresponds to 0.5 moles of H₂O, which is less than Avogadro's number of molecules.

Sulfuric acid has a molar mass of 98.09 g/mol. Therefore, 108.0 g of H₂SO₄ corresponds to 1.1 moles of H₂SO₄, which is less than Avogadro's number of molecules.

To learn more about the Avogadro's number, follow the link:

https://brainly.com/question/16348863

#SPJ6

Partial pressure of CO2 in the mixture is 0.350 atm.

We need to use mole fraction of [tex]CO_{2}[/tex] to find the partial pressure of CO2 in the mixture

First calculate the moles of carbon dioxide and CH4 in the mixture. Now can use the molar mass of each gas. Then convert the given masses to moles.

moles of [tex]CO_{2}[/tex] = 4.34 / 44.01  = 0.0987 mol

moles of [tex]CH_{4}[/tex] = 3.08  / 16.04 = 0.192 mol

Now have to calculate the total moles of gas.

Total moles = moles of [tex]CO_{2}[/tex] + moles of CH4 = 0.0987 mol + 0.192 mol = 0.2907 mol

Now we will calculate the mole fraction of CO2,

mole fraction of  [tex]CO_{2}[/tex] = moles of [tex]CO_{2}[/tex] / total moles = 0.0987 mol / 0.2907 mol = 0.3396

Finally, mole fraction to calculate the partial pressure of CO2

partial pressure of CO2 = mole fraction of CO2 x total pressure = 0.3396 x 1.03 atm = 0.350 atm

Therefore the partial pressure is 0.350 atm.

Learn more about Partial pressure:

https://brainly.com/question/15082496

#SPJ4

The pH of the 19.0 mL sample of 0.455 M aqueous hypochlorous acid solution is approximately 4.49.

To determine the pH at the start of the titration, before any potassium hydroxide has been added, we can use the following steps:

1. Identify the given information:
- Volume of hypochlorous acid (HOCl) solution = 19.0 mL
- Molarity of hypochlorous acid (HOCl) solution = 0.455 M

2. Write the dissociation reaction for hypochlorous acid:
HOCl ⇌ H+ + OCl-

3. Use the Ka expression to calculate the pH:
Ka = [H+][OCl-] / [HOCl]
For hypochlorous acid, Ka = 3.5 x 10^-8

4. Set up an ICE table:
 Initial:      0.455 M      0 M        0 M
 Change:       -x          +x         +x
 Equilibrium: 0.455-x M     x M        x M

5. Substitute the values into the Ka expression:
(3.5 x 10^-8) = (x)(x) / (0.455 - x)

6. Solve for x (assuming x is small compared to 0.455, so 0.455 - x ≈ 0.455):
x = √((3.5 x 10^-8) * 0.455) ≈ 3.22 x 10^-5 M

7. Calculate the pH:
pH = -log[H+] = -log(3.22 x 10^-5) ≈ 4.49

At the start of the titration, before any potassium hydroxide has been added, the pH of the 19.0 mL sample of 0.455 M aqueous hypochlorous acid solution is approximately 4.49.

Learn more about pH here:

brainly.com/question/28133567

#SPJ11

Atoms is defined as a particle of matter that consists of a central nucleus that is surrounded by one or more negatively charged electrons which has equal number of protons and electrons. So option (a) id correct.

Atoms are defined as the smallest part of a substance which cannot be broken down chemically. Each of the atom has a nucleus that is present in the center which is made up of protons which are called as positive particles and neutrons that are the particles with no charge. Electrons  are the negative particles which moves around the nucleus. An atom has an equal number of electrons and protons in its cell. It is evident that  atom is electrically neutral because of the number of protons is always equal to a number of electrons. Atoms of the same element  must have the same atomic number so that the number of protons and electrons are being same.  

To learn more about Atoms

https://brainly.com/question/17545314

#SPJ4

which of the following statement about atoms is true?

group of answer choices normally,

A. an atom has an equal number of protons and electrons.

B. all atoms in the universe have the same number of electrons.

C. all atoms in the universe have the same number of protons.

D. any molecule that has mass is an atom.

E. atoms are the simplest part of a proton or a neutron

Answer:.143 moles

Explanation:

Explanation:

We're going to use this equation

n

=

M

⋅

V

M meaning our molarity, n meaning our moles involved, and v meaning our volume in Liters.

n

=

2.20

⋅

.065

n=.143 moles.

Answer:

there are 0.143 moles of NaOH in 65.0 mL of a 2.20 M solution of NaOH.

Explanation:

To calculate the number of moles of NaOH in a given solution, we need to use the formula:

moles = concentration (in M) x volume (in L)

We are given the concentration of NaOH solution as 2.20 M and the volume as 65.0 mL. However, we need to convert the volume to liters before we can use the formula.

65.0 mL = 65.0/1000 L = 0.065 L

Now we can plug in the values in the formula:

moles = 2.20 M x 0.065 L

moles = 0.143 moles

Therefore, there are 0.143 moles of NaOH in 65.0 mL of a 2.20 M solution of NaOH.