which is the conjugate base of water? select the correct answer below: hydronium hydroxide water none of the above

Antoine Lavoisier proposed the Law of Conservation of Mass in 1789.

According to the mass conservation principle, mass in a closed system cannot be created or destroyed, but can only be transformed from one state to another. This means that the system's total mass stays constant over time, regardless of physical or chemical changes within the system.

This law is a fundamental principle in many branches of science, including chemistry and physics, and it has significant consequences for understanding how matter and energy behave in the universe. The idea of energy conservation is closely related to the law of conservation of mass, which says that the total amount of energy in a closed system is also conserved over time.

These laws, taken together, provide a framework for understanding the basic properties of matter and energy, as well as how they interact in the universe.

Learn more about the Law of Conservation of Mass:

https://brainly.com/question/19038178

The complete question :

Describe the Law of Conservation of Mass?

According to the law of conservation of mass, the statement that is always true about chemical reactions is: A) In a chemical reaction, matter is not created or destroyed, but is conserved.

A chemical reaction is the process in which one or more substances change into different substances. The starting substances are called reactants, and the substances that are produced are called products.

The law of conservation of mass states that in a chemical reaction, matter is not created or destroyed, but is conserved. This implies that the mass of the reactants is equal to the mass of the products. This law means that the amount of matter that exists before and after a chemical reaction is the same.

Hence, the correct option for the statement about chemical reactions that is always true according to the law of conservation of mass is A. In a chemical reaction, matter is not created or destroyed, but is conserved.

To know more about law of conservation of mass

brainly.com/question/13383562

#SPJ11

A thermodynamic state function is a value that is independent of a route. As a result, functions like as pressure, volume, and temperature are determined only by the state of a system and not by the path.

A thermodynamic potential, also known as a basic function, is a quantity used to indicate a system's state. Internal energy U, enthalpy H, Helmholtz free energy F, and Gibbs free energy G are our four fundamental functions.

State functions or point functions are properties whose value does not depend on the path followed to obtain that value. Path functions, on the other hand, are those functions that do depend on the path between two places.

learn more about thermodynamic state

https://brainly.com/question/26035962

#SPJ1

Charles's Law-

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]

Where:-

As per question, we are given that -

We are given the initial in °C.So, we first have to convert the temperature in Celsius to kelvin by adding 273-

[tex]\:\:\:\:\:\:\star\sf T_1[/tex] = 23+ 273 =296K

Now that we have obtained all the required values, so we can put them into the formula and solve for T₂ :-

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{\dfrac{T_2}{V_2}=\dfrac{T_1}{V_1}}\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{T_2=\dfrac{T_1}{V_1} \times V_2}\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=\dfrac{296}{12} \times 52\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=24.66....... \times 52\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=1282.66.........\:K\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=(1282.67 -273)°C\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=1009.66....\:°C\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{T_2=1009.67\:°C}\\[/tex]

Therefore, If 12L of neon at 23 °C is allowed to expand to 52 L then the new temperature will become 1009.67°C or 1282.67K to maintain constant pressure.

Answer:

According to recent studies, the first layer of soil in the midwestern United States is being eroded at a rate 10 to 1000 times faster than it is forming. This alarming rate of soil erosion could have significant consequences for agriculture, ecosystems, and even the economy.

Soil erosion can have both direct and indirect effects on human societies. When topsoil is lost, the quality of the remaining soil is reduced, and this can have a significant impact on crop yields. Soil erosion can also contribute to water pollution as runoff carries with it excess nutrients and pesticides from the fields.

Additionally, soil erosion can cause severe damage to ecosystems. When topsoil is lost, the delicate balance of nutrients, microorganisms and other life forms is negatively impacted. This can lead to reduced biodiversity and degradation of the natural landscape.

In light of these findings, it is clear that more needs to be done to address the issue of soil erosion. This could include measures such as greater use of cover crops, conservation tillage practices, and other sustainable farming practices. These measures could help slow down or even stop the erosion of the topsoil.

In conclusion, soil erosion in the midwestern United States should be taken seriously. It is important to understand the causes and effects of soil erosion and to take proactive measures to protect our natural resources. By implementing sustainable farming practices, we can work towards the goal of ensuring that our soil remains productive and healthy for current and future generations.

The chemical equation for the reaction is as follows:CH3CH2COOH + H2O → CH3CH2COOH + H3O+

When answering a question on Brainly, as a question answering bot, it is important to always be factually accurate, professional, and friendly. Additionally, it is essential to be concise and not provide extraneous amounts of detail.

Any typos or irrelevant parts of the question should be ignored. Below is the condensed structural formula of the organic product for propanoic acid reacting with each of the following:

NaOHSodium hydroxide (NaOH) reacts with propanoic acid (CH3CH2COOH) to give sodium propanoate (CH3CH2COO-Na+). The chemical equation for the reaction is as follows:

CH3CH2COOH + NaOH → CH3CH2COO-Na+ + H2OMethanolWhen propanoic acid reacts with methanol (CH3OH) in the presence of a catalyst, such as sulfuric acid (H2SO4), methyl propanoate (CH3CH2COOCH3) is formed.

The chemical equation for the reaction is as follows:CH3CH2COOH + CH3OH → CH3CH2COOCH3 + H2OWaterWhen propanoic acid reacts with water (H2O), it undergoes hydrolysis to give propanoic acid and hydronium ions (H3O+).

To learn more about : chemical

https://brainly.com/question/29886197

#SPJ11

According to Graham's law of effusion, the rate of effusion of a gas is inversely proportional to the square root of its molar mass. That is:

rate of effusion ∝ 1/√M

where M is the molar mass of the gas.

Let's assume that the molar mass of CO2 is M1 and the molar mass of the product gas is M2. We can express the ratio of their effusion rates as:

M2/M1 = (rate of effusion of CO2) / (rate of effusion of the product gas)

M2/M1 = (1/1.63)^2 (since the product gas took 1.63 times as long to effuse as CO2)

M2/M1 = 0.376

We know that the molar mass of CO2 is 44 g/mol. Therefore, we can solve for the molar mass of the product gas:

M2 = M1 x 0.376

M2 = 44 g/mol x 0.376

M2 = 16.544 g/mol

So the molar mass of the product gas is approximately 16.5 g/mol.

To know more about gas click here

brainly.com/question/14812509

#SPJ4

Phosphorus pentafluoride is not an ionic compound. Option A is correct.

Phosphorus pentafluoride (PF₅) is a covalent compound composed of one phosphorus atom and five fluorine atoms. It is a colorless, toxic, and reactive gas that is used in various chemical reactions and as a reagent in the synthesis of other chemical compounds.

The PF₅ molecule has a trigonal bipyramidal shape, with the phosphorus atom at the center and the five fluorine atoms arranged around it. The molecule has a dipole moment and is polar, which makes it soluble in polar solvents such as water.

An ionic compound is a type of chemical compound that is formed by the attraction of positively and negatively charged ions. In an ionic compound, one or more atoms will lose electrons to form a positively charged ions known as cations, while one or more atoms gain electrons to form negatively charged ions known as anions.

Hence, A. is the correct option.

To know more about ionic compound here

https://brainly.com/question/9167977

#SPJ4

--The given question is incomplete, the complete question is

"Which compound name does not correspond to an ionic compound? select one: A) phosphorus pentafluoride B) silver iodide C) magnesium bromide D) molybdenum(v) chloride."--

The normality of acetic acid in this vinegar is 0.0422 N.

The balanced chemical equation for the reaction between acetic acid and sodium hydroxide is:

CH₃COOH + NaOH → NaCH₃COO + H₂O

From the equation, we can see that the mole ratio between acetic acid and sodium hydroxide is 1:1. So, the number of moles of NaOH used in the titration can be calculated as,

0.1113 N × 0.01746 L = 0.001944 moles NaOH

Since the mole ratio of acetic acid and NaOH is 1:1, the number of moles of acetic acid present in the 46.1 ml sample of vinegar is also 0.001944 moles.

The normality of acetic acid can be calculated using the formula:

Normality = (number of moles of solute) / (volume of solution in liters)

Normality = 0.001944 moles / 0.0461 L = 0.0422 N

To know more about vinegar, here

brainly.com/question/11530998

#SPJ4

The standard reduction potential is a measure of the tendency of a species to gain electrons and undergo reduction. A higher reduction potential means that a species is more likely to undergo reduction.

The high standard reduction potential of F2 can be attributed to its small atomic size and high electronegativity. Fluorine has a strong attraction for electrons due to its high electronegativity, and its small atomic size allows it to tightly hold onto its valence electrons. As a result, F2 has a strong oxidizing power and a high tendency to accept electrons, leading to a high standard reduction potential.

On the other hand, the standard reduction potentials for alkali metals are negative due to their low electronegativity and large atomic size. Alkali metals have a strong tendency to lose their valence electrons due to their low electronegativity and relatively large atomic size, which makes their valence electrons more loosely bound. As a result, they have a low tendency to accept electrons, and their standard reduction potentials are negative.

It is also important to note that standard reduction potentials are measured under standard conditions, which may not reflect the behavior of the species in other environments. Factors such as the presence of other species, the pH, and the temperature can affect the behavior of species and their standard reduction potentials.

Learn more about Alkali metals here:

brainly.com/question/18153051

#SPJ4

F-18 has a biological half-life of about 6 hours and a physical half-life of 1.83 hours, making its active half-life roughly 1.4 hours (7). Fluorine F 18 has a half-life is 109.7 minutes and decays by positron,(+) emission.

Positrons are released by this fluorine radioactive isotope. A radioactive version of glucose that's also easily absorbed by cancer cells as well as normal cells can be created using F-18. Nuclear imaging can be used to locate tumours, map brain activity, and identify other diseases.

A key source of positrons is the fluorine radioisotope fluorine-18 (18F). Its half-life was 109.771(20) minutes, and its mass is 18.0009380(6) u. 96% of the time, it decays via positron emission, and 4% by electron capture.

To know more about positron visit:

https://brainly.com/question/21275312

#SPJ1

The source of energy used to heat massive amounts of water to boiling temperature for steam can vary, depending on the specific context and application. However, some common sources of energy used for this purpose include: Fossil fuels, Nuclear energy, and Renewable energy.

Fossil Fuels: Coal, oil, and natural gas are commonly used as fuels to produce steam. They are burned to generate heat, which is then transferred to the water to increase its temperature.

Nuclear Energy: Nuclear power plants use the energy released by nuclear reactions to generate heat, which is then used to produce steam.

Renewable Energy: Renewable sources of energy such as solar, wind, geothermal, and hydroelectric power can also be used to produce steam. For example, solar thermal power plants use sunlight to heat a fluid, which is then used to generate steam.

The amount of energy required to heat massive amounts of water to boiling temperature for steam production depends on various factors, such as the volume of water being heated, the desired temperature, and the efficiency of the heating system.

To know more about boiling temperature here

https://brainly.com/question/22765691

#SPJ4

Answer:  An isolated system is a thermodynamic system that cannot exchange either energy or matter outside the boundaries of the system.

Explanation:

if the volume decreases from 4.10 to 1.12 l against a constant pressure of 0.801 atm Then The work involved is 324.8 J

The change in volume is V₂ - V₁

∆V = 4.1 - 1.12 L

∆V = 2.98

∆V = 2.98 x 10⁻³ m³

∆V = 3 ×10⁻³ m³

The constant pressure is

p = 0.857 atm = 0.857*101325 Pa

p = 86836 Pa

By definition, the work done is

[tex]W = \int\limits pdV = 86836 \frac{N}{m²} * (3 ×10⁻³ m³)[/tex]

In physics, work is the energy transferred to or from an object via the application of force along a displacement. In its simplest form, for a constant force aligned with the direction of motion, the work equals the product of the force strength and the distance traveled. A force is said to do positive work if when applied it has a component in the direction of the displacement of the point of application. A force does negative work if it has a component opposite to the direction of the displacement at the point of application of the force.

Visit here to learn more about the work: https://brainly.com/question/6578814
#SPJ4

For the bond between amino acids, you would add a label describing that it is  a covalent bond in proteins.

The bond between amino acids is a covalent bond known as a peptide bond, which forms when the carboxyl group of one amino acid reacts with the amino group of another amino acid. This reaction is called a dehydration reaction, as a water molecule is removed during the formation of the peptide bond.

Proteins are made up of long chains of amino acids joined together by peptide bonds. The sequence of amino acids determines the structure and function of the protein. The peptide bond is the backbone of the protein chain, which is made up of alternating carbon and nitrogen atoms with the attached amino acid side chains.

In contrast to a covalent bond, ionic bonds are formed when two atoms with opposite charges attract each other. In proteins, ionic bonds can form between the side chains of amino acids that have charged groups, such as lysine and arginine, and those with negatively charged groups, such as aspartic acid and glutamic acid. However, these ionic bonds are not involved in the formation of peptide bonds.

Similarly, hydrogen bonds, which are weak electrostatic interactions between a hydrogen atom and a negatively charged atom such as oxygen or nitrogen, are not involved in the formation of peptide bonds. Hydrogen bonds do play a role in stabilizing the structure of proteins, but they are not the primary type of bond involved in protein structure.

In carbohydrates, covalent bonds known as glycosidic bonds join monosaccharides (simple sugars) together to form polysaccharides (complex sugars), such as starch and cellulose. These covalent bonds are similar to peptide bonds in proteins in that they involve the loss of a water molecule during formation.

Therefore, the correct answer to the lab practical question is c. a covalent bond in proteins.

To know more about covalent bond, visit the link given below;

https://brainly.com/question/10777799

#SPJ4

The number of covalent bonds generated by each atom in C, H, O, Cl, N, S, and P is as follows:

Covalent bonding occurs when atoms share electrons to achieve a more stable electron configuration. In general, elements that are close to each other on the periodic table tend to form covalent bonds, while elements that are far apart tend to form ionic bonds. Atoms can share one, two, or three pairs of electrons to form single, double, or triple covalent bonds, respectively. The number of electrons shared is determined by the number of electrons needed to achieve a stable configuration.

The number of covalent bonds formed by each of the atoms in C, H, O, Cl, N, S, and P depends on the number of valence electrons each atom has and the number of electrons needed to achieve a stable octet. These numbers are based on the octet rule, which states that atoms will bond in such a way as to achieve a stable electron configuration with a full valence shell of 8 electrons (or 2 electrons for hydrogen). Covalent bonding occurs when atoms share electrons to achieve this stable configuration.

The complete question is

If covalent bonding occurs because an atom wants to achieve an octet and therefore fill empty spaces in its orbital, how many covalent bonds would you think are formed by each of the atoms in C, H, O, Cl, N, S, and P?

To know more about the Bonding, here

https://brainly.com/question/26149387

#SPJ4

Answer: Smokestacks are not a method to reduce the emissions of particulate matter.

Explanation: Smokestacks are the structures that release the emissions into the atmosphere. The other options listed - scrubbers, fluidized bed combustion, fabric filters, and electrostatic precipitators are all methods to reduce particulate matter emission.

The method that is not used to reduce the emissions of particulate matter is "Smokestacks".

Smokestacks are not a method to reduce the emissions of particulate matter. Smokestacks are the exhaust pipes in industries that emit the waste products into the atmosphere. Smokestacks are installed in the factories for the removal of flue gases produced during the combustion process.

Scrubbers, Fluidized bed combustion, Fabric filters, and Electrostatic precipitator are some methods used to reduce the emissions of particulate matter. These are explained below:

Scrubbers are used to eliminate acidic gases ([tex]SO_2[/tex] and NOx) as well as particulate matter from industrial flue gas. When flue gases enter a scrubber, they are exposed to a liquid solution that contains a base. [tex]SO_2[/tex] and NOx gases are neutralized as they pass through this solution, and particulate matter is trapped.

Fluidized bed combustion: In this method, the fuel is burned in a bed of inert particles at a high temperature, resulting in less NOx emissions and the release of less particulate matter into the atmosphere.

Fabric filters are used to filter out fine particles from flue gases by trapping them in woven filter bags. The bags are cleaned regularly to keep them functional.

Electrostatic precipitators use electrical charges to remove particulate matter from flue gases. Particles are ionized by a high-voltage electric field and then collected on oppositely charged plates, resulting in clean flue gas being released into the environment.

To know more about Smokestacks

brainly.com/question/30754998

#SPJ11

In the inductive step of a proof, you need to prove the statement that If P(k) is true and then P(k+1) is true.

In the induction process, a charged object is brought near but not touched to a neutral conducting object. The presence of a charged object near a neutral conductor will force (or induce) electrons within the conductor to move.

The method can be extended to prove statements about more general well-founded structures, such as trees; this generalization, known as structural induction, is used in mathematical logic and computer science. Mathematical induction in this extended sense is closely related to recursion. Mathematical induction is an inference rule used in formal proofs, and is the foundation of most correctness proofs for computer programs.

Visit here to learn more about the induction: https://brainly.com/question/18575018

#SPJ4

Methane (CH₄) plays the same role on Titan as water does on Earth, existing as gas, liquid, and solid.

On Earth, water exists as a gas (water vapor), liquid (water), and solid (ice) due to the planet's temperature and atmospheric pressure conditions. On Titan, the largest moon of Saturn, the role of water is replaced by methane. Methane exists as a gas in Titan's atmosphere, and due to the extremely low temperatures and high atmospheric pressure, it can also exist as a liquid and solid on the moon's surface.

Titan's atmosphere is primarily composed of nitrogen, with small amounts of methane, ethane, and other gases. The presence of methane and other hydrocarbons on Titan has led scientists to speculate about the possibility of life on the moon, although this has yet to be confirmed.

To know more about titan, here

brainly.com/question/31160630

#SPJ4

The volume of a gas is directly proportional to its temperature when pressure and moles remain constant. As the temperature increases, the volume of nitrogen gas also increases. Hence, the correct option is (D) i.e. 5.59 L.

To solve this problem, we can use the combined gas law:

(P1V1)/T1 = (P2V2)/T2

where P is pressure, V is volume, and T is temperature. We can assume that the pressure remains constant, as the problem states that the container is flexible.

Given:

V1 = 5.00 L

T1 = 298 K

T2 = 333 K

We need to find V2 of nitorgen.

(P1V1)/T1 = (P2V2)/T2

V2 = (P1V1T2)/(P2T1)

We can assume that the pressure remains constant, so P1 = P2. Therefore, we can simplify the equation to:

V2 = (V1T2)/(T1)

V2 = (5.00 L)(333 K)/(298 K)

V2 = 5.59 L

Therefore, the correct option is (D) 5.59 L.

To know more about nitrogen please refer: https://brainly.com/question/13907528

#SPJ1

3020 grams of iron are produced when 27.0 moles of hematite react with 86.0 moles of carbon monoxide.

Balanced chemical equation for the reaction between hematite and carbon monoxide will be; Fe₂O₃(s) + 3CO(g) -> 2Fe(s) + 3CO₂(g)

From the balanced equation, we can see that 1 mole of Fe₂O₃ reacts with 3 moles of CO to produce 2 moles of Fe. So, to determine the amount of iron produced, we first need to determine which reactant is limiting.

We can calculate the moles of Fe₂O₃ and CO;

Moles of Fe₂O₃ = 27.0 moles

Moles of CO = 86.0 moles

To determine the limiting reactant, we need to compare the mole ratio of Fe₂O₃ to CO required by the balanced equation (1:3) to the actual mole ratio of Fe₂O₃ to CO provided.

Mole ratio of Fe₂O₃ to CO = 27.0/1 : 86.0/3 = 81 : 86 ≈ 0.94 : 1

Since the actual mole ratio of Fe₂O₃ to CO is less than the mole ratio required by the balanced equation, Fe₂O₃ is the limiting reactant.

The amount of Fe produced can be calculated using the mole ratio of Fe₂O₃ to Fe in the balanced equation.

Moles of Fe = 2/1 × moles of Fe₂O₃ = 2/1 × 27.0 moles = 54.0 moles

Finally, we can convert moles of Fe to grams of Fe using the molar mass of Fe

Grams of Fe = moles of Fe × molar mass of Fe = 54.0 moles × 55.85 g/mol = 3020 g

To know more about limiting reactant here

https://brainly.com/question/2948214

#SPJ4

Answer:

The "global carbon budget" model shows the causes and amounts of carbon flux into and out of the carbon cycle.

The solubility of a gas in a liquid is dependent on the partial pressure of the gas above the liquid, as stated in the third statement. However, the second statement is false because the solubility of a solute in a solvent typically increases as the strength of the attractive forces between the solute and solvent molecules increases, not decreases.

The statement "the weaker the attraction between the solute and solvent molecules, the greater the solubility" is false.

Solubility is a measure of how much of a solute can dissolve in a given amount of solvent at a certain temperature and pressure. The solubility of a solute depends on various factors such as the nature of the solute and solvent, temperature, pressure, and the intermolecular forces between them.

Generally, substances with similar intermolecular attractive forces tend to be soluble in one another, as stated in the first statement. Nonpolar liquids tend to be insoluble in polar liquids, as stated in the fourth statement.

Find out more about the solubility of a gas

brainly.com/question/14781271

#SPJ4

The concentration from which the diluted sample was taken is 150mg/dl. Thus Option D is the correct answer.

Given ,

Here we are using 1/30 ratio of transparent cuvette with respect to the  oxygen-acceptor solution that contains the crucial glucose oxidase these are necessary for the solution to work and the concentration to be detected.

The glucose concentration in the diluted sample is

(0.20/0.24) × 60. mg/dl = 5.0 mg/dl

Therefore,

The glucose concentration in blood is 30 × 5.0 mg/dl = 150 mg/dl

The concentration from which the diluted sample was taken is 150mg/dl. Thus Option D is the correct answer.

To learn more about concentration of glucose,

https://brainly.com/question/28850775

#SPJ4

The pH of the solution is 2.46. It is important to note that the answer should have the correct number of significant digits, which in this case is three.

To calculate the pH of the solution, we need to first determine the concentration of the solution.

Concentration (M) = moles of solute (n) / volume of solution (V)Concentration of solution = 0.2500 mol / 2.500 L

= 0.100 M

Now that we have the concentration, we can calculate the pH of the solution by using the pH formula:

pH = -log [H+]

The concentration of H+ in the solution can be calculated using the ionization constant of perchloric acid.

Ka = [H+][ClO4-]/[HClO4]1.2 x 10^-2

= [H+]^2/[0.100 M]

Therefore, [H+] = 0.00347 M

Now we can substitute this value into the pH formula:

pH = -log (0.00347)

= 2.46

To learn more about: pH

https://brainly.com/question/12609985

#SPJ11

The correct answer is To calculate the pressure required to compress 198 L of air at 2.5 atm into a cylinder whose volume is 35 L, we can use the ideal gas law.

PV = nRT where P is the pressure, V is the volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature in Kelvin. Assuming that the temperature remains constant during compression, we can rearrange the equation to solve for the final pressure: P_final = (nRT) / V_final where V_final is the final volume of the compressed air. First, we need to calculate the initial number of moles of air: n_initial = (P_initial * V_initial) / (RT) where P_initial is the initial pressure, V_initial is the initial volume, and R is the universal gas constant. Since we know the initial volume and pressure, we can plug in the values and solve for n_initial: n_initial = (2.5 atm * 198 L) / (0.0821 L·atm/mol·K * 298 K) n_initial = 20.3 mol Next, we can use the ideal gas law again to calculate the final pressure: P_final = (n_initial * R * T) / V_final where T is the constant temperature in Kelvin. Assuming the temperature is 298 K, and the final volume is 35 L, we can plug in the values and solve for P_final: P_final = (20.3 mol * 0.0821 L·atm/mol·K * 298 K) / 35 L P_final = 3.0 atm Therefore, the pressure required to compress 198 L of air at 2.5 atm into a cylinder whose volume is 35 L is 3.0 atm.

To learn more about gas law click on the link below:

brainly.com/question/27009857

#SPJ1

The mixture's final temperature is 62.8°C.

The specific heat of water is 4.184 J/g-K due to the fact that there are 4.184 joules in a calorie. The molar heat capacity of a substance—the amount of heat required to increase the temperature of one mole of the substance by either 1oC or 1K—can also be used to characterise how easily it gains or loses heat.

Q = mcΔT

Q hot = -Q cold

where Q hot is the heat lost by the hot water, and Q cold is the heat gained by the cold water.

Using the equation above, we can write:

m hot * c water * (T final - T hot) = -m cold * c water * (T final - Tcold)

where m hot is the mass of the hot water, m cold is the mass of the cold water, c water is the specific heat capacity of water, T hot is the initial temperature of the hot water, T cold is the initial temperature of the cold water, and T final is the final temperature of the mixture.

Substituting the given values, we get:

(6.0x102 g) * (1 cal/g°C) * (T final - 90.0°C) = -(4.00x102 g) * (1 cal/g°C) * (T final - 22.0°C)

Simplifying and solving for T_final, we get:

T final = (m hot * T hot + m cold * T cold) / (m hot + m cold)

T final = [(6.0x102 g) * (90.0°C) + (4.00x102 g) * (22.0°C)] / (6.0x102 g + 4.00x102 g)

T final = (54000 + 8800) / 1000

T final = 62.8°C

To know more about temperature visit:-

https://brainly.com/question/11050215

#SPJ1

The balanced equation is written as

2HCl + Ca(OH)₂ --> CaCl₂+ 2H₂O. From using the mole ratio, the volume of 0.01154 M HCl needed to titrate 20.00 mL of 0.0125 M Ca(OH)₂ is equals to 43.3 mL.

Mole ratio is defined as a ratio between the number of moles of any two components in a balanced chemical reaction/equation. We have, two components Hydrochloric acid, HCl and calcium hydroxide, Ca(OH)₂ for reaction.

Volume of calcium hydroxide solution

V₁ = 20.00 mL = 0.020 L

Molarity of HCl, M₂ = 0.01154 M

Molarity of Ca(oh)₂, M₁ = 0.0125 M

Chemical reaction/equation for components,HCl + Ca(OH)₂-->CaCl₂+ H₂O

Balanced equation is written as

2HCl + Ca(OH)₂ --> CaCl₂+ 2H₂O

Now, mole ratio of HCl to Ca(OH)₂ is 2:1 that is moles of HCl are two times the mol of Ca(OH)₂ to form the respective products. Let V be the needed volume of hydrochloric acid to titrate Ca(OH)₂ solution. Using the molarity formula, Molarity of Ca(OH)₂ = moles of Ca(OH)₂/volume of Ca(OH)₂

=> 0.0125 mol/L = moles of Ca(OH)₂/0.02

=> moles of Ca(OH)₂ = 0.00025 moles

From mole ratio, moles of HCl are required to neutralize, Ca(OH)₂= 0.00025 moles Ca(OH)₂ (2 moles HCl/1 mole Ca(OH)₂ = 0.0005 moles

Now, using molarity formula for HCl,

M₂ = moles of HCl/Volume of HCl

=> 0.01154 Mol/L = 0.0005 moles/V

=> V = 0.0433 L = 43.3 mL ( 1L = 1000 mL).

Hence, required value of volume is 43.3 mL.

For more information about mole ratio, visit :

https://brainly.com/question/30632038

#SPJ4

For a sample of saturated Ca(OH)₂, solution is titrated with 0.030 M HCl. The concentration (m) of the hydroxide ion is equals to the 0.04571 M.

We have a sample of a saturated Ca(OH)₂, solution is titrated with HCl. The balanced chemical reaction is written as

2HCl + Ca(OH)₂--> CaCl₂ + 2H₂O

or 2H⁺ + OH⁻ --> H₂O

that is two moles of HCl are needed in one mol of calcium hydroxide. Now,

Volume of Ca(OH)₂ = 25.0 mL

Molarity of HCl = 0.030

Volume of titrant (HCl) = 38.1 mL. Let the concentration of Ca(OH)₂ and HCl be C₁ and C₂. As we know that, in many cases concentration is considered as molarity ( mol/L). So, concentration of Ca(OH)₂ solution, C₁ = 0.030 mol/L. Equating H⁺ ions and hydroxide (OH⁻) ions, C₁ × V₁ ( Ca(OH)₂) = C₂ × V₂ (HCl)

Here, V₁ = 25 mL, V₂ = 38.1 mL

=> C₁ ×25 mL = 0.03 mol/L × 38.1 mL

=> C₁ = 0.04571 M

Then, concentration of OH⁻ ion is 0.04571 M. For, concentration of Ca(OH)₂ = 0.5× [OH⁻] = 0.5×0.04571 (mol = 1/2)

= 0.02285 M

Hence, concentration of both OH⁻ and Ca(OH)₂ are 0.04571 M and 0.02285 M.

For more information about concentration, visit :

https://brainly.com/question/30653246

#SPJ4