Which is the only plate has all margins as convergent boundaries

Nitrogen gas ([tex]N_2[/tex]) has a molar mass of 28.02 g/mol, while hydrogen gas ([tex]H_2[/tex]) has a molar mass of 2.02 g/mol. Ammonia ([tex]NH_3[/tex]) has a molar mass of 17.03 g/mol.

We must calculate the moles of each reactant in order to identify the limiting reactant. We may determine that there are 5.0 moles of [tex]N_2[/tex] and 1.0 moles of [tex]H_2[/tex] based on the stated masses. The reaction is described by the balanced chemical equation [tex]N_2 + 3H_2 2NH_3[/tex], which indicates that 1 mole of [tex]N_2[/tex] reacts with 3 moles of [tex]H_2[/tex]. As a result, [tex]H_2[/tex] is the limiting reactant and there will be an excess reactant of 2.0 - (1.0/3) = 1.67 grams of [tex]H_2[/tex].

To know more about Nitrogen gas, here

brainly.com/question/11426882

#SPJ4

--The complete Question is, What is the molar mass of nitrogen gas, hydrogen gas, and ammonia in the Haber Process? Given that 11.0 grams of nitrogen gas and 2.0 grams of hydrogen gas are available, which reactant is the limiting reactant? What is the amount of excess reactant left over after the reaction?--

The balanced chemical equation is:

2 MnI2 + 13 F2 → 2 MnF3 + 4 IF5

According to the stoichiometry of the reaction, for every 13 moles of F2 that react, 2 moles of MnI2 are consumed. Therefore, the conversion factor to use when converting moles of MnI2 to moles of F2 is:

13 moles F2 / 2 moles MnI2

This conversion factor can be used to convert moles of MnI2 to moles of F2 or vice versa, by multiplying the number of moles of the starting substance by the conversion factor.

To know more about chemical refer here

https://brainly.com/question/29237397#

#SPJ11

Total, 1.77 g of silver sulfide are formed, when 1. 90 g of silver reacts with 0.

Balanced chemical equation for the reaction is;

4Ag(s) + 2H₂S(g) + O₂(g) → 2Ag₂S(s) + 2H₂O(g)

To determine the limiting reactant, we need to compare the number of moles of each reactant to their stoichiometric ratio in the balanced equation.

First, we need to convert the given masses of silver, hydrogen sulfide, and oxygen to moles;

molar mass of Ag = 107.87 g/mol

moles of Ag = 1.90 g / 107.87 g/mol

= 0.0176 mol

molar mass of H₂S = 2(1.01 g/mol) + 32.06 g/mol = 34.08 g/mol

moles of H₂S = 0.280 g / 34.08 g/mol = 0.00821 mol

molar mass of O₂ = 2(16.00 g/mol) = 32.00 g/mol

moles of O₂ = 0.160 g / 32.00 g/mol = 0.00500 mol

Next, we need to compare the number of moles of each reactant to their stoichiometric ratio in the balanced equation;

Ag ; H₂S ; O₂ = 4 : 2 : 1

The stoichiometric ratio tells us that we need 2 moles of H2S and 0.5 moles of O₂ for every 4 moles of Ag.

Let's calculate the number of moles of each reactant we actually have, starting with H₂S;

H₂S is the limiting reactant if it produces fewer moles of Ag₂S than either of the other reactants. We can calculate the number of moles of Ag₂S that each reactant would produce, assuming that it is the limiting reactant;

If H₂S is the limiting reactant;

moles of Ag₂S = (0.00821 mol H₂S) x (2 mol Ag₂S / 2 mol H₂S)

= 0.00821 mol

If O₂ is the limiting reactant;

moles of Ag₂S = (0.00500 mol O₂) x (2 mol Ag2S / 1 mol O₂)

= 0.0100 mol

If Ag is the limiting reactant;

moles of Ag₂S = (0.0176 mol Ag) x (0.5 mol Ag₂S / 4 mol Ag)

= 0.00220 mol

Since H₂S produces the fewest moles of Ag₂S, it is the limiting reactant.

To calculate the mass of Ag₂S produced, we can use the number of moles of Ag₂S produced by the limiting reactant:

mass of Ag₂S = (0.00821 mol Ag₂S) x (2 x 107.87 g/mol)

= 1.77 g

Therefore, 1.77 g of silver sulfide are formed.

To know more about silver sulfide here

https://brainly.com/question/31158390

#SPJ4

After 100 years, a person who had 100 g of pure radioactive nuclei with a half-life of 100 years would have 50 g of radioactive nuclei left.

The half-life of a radioactive substance is the time it takes for half of the substance's original amount to decay. In this case, since the half-life is 100 years, after 100 years, half of the original amount of radioactive nuclei would have decayed.

After the first 100 years, 50 g of radioactive nuclei would remain, and the other 50 g would have decayed. If we wait for another 100 years, half of the remaining 50 g, which is 25 g, would decay, leaving only 25 g of the original amount. This process will continue until all the radioactive nuclei have decayed.

It's worth noting that the rate of decay is exponential, which means that the amount of radioactive substance remaining decreases at a constant rate over time. Knowing the half-life of a radioactive substance is important in determining the amount of time it takes for the substance to decay to a safe level.

To know more about radioactive nuclei refer to-

https://brainly.com/question/30304562

#SPJ11

We can deduce from the computations that the mass of the acetic acid produced is 28.2 g.

The reactant that is totally consumed during a chemical reaction involving two or more reactants is known as the limiting reactant. This limits the amount of product that can be generated. Excess reactants are the additional reactant(s) that are still present after the limiting reactant has been completely consumed.

CH3CHO's molecular weight is 20.8 g/44 g/mol.

= 0.47 moles

O2 molecular weight is 14.5 g/32 g/mol.

= 0.45 moles

If 1 mole of O2 interacts with 2 moles of CH3CHO

CH3CHO containing 0.47 moles would react with 0.47 * 1/2.

= 0.24 moles

Thus, the limiting reactant is CH3CHO.

Acetic acid mass produced is 0.47 moles * 60 g/mol.

= 28.2 g

Learn more about acetic acid:brainly.com/question/15202177

#SPJ1

Compared to the average population around the world, North America has a (a) 24% greater percentage of people with access to safely managed drinking water facilities as of 2020.

According to the information provided, the percentage of the population with access to drinking water facilities in North America is higher than the average for the world.

The exact percentage varies depending on the option selected in the question, but the difference ranges from 16% to 98%. This difference may be attributed to several factors, including a more developed infrastructure and better regulation of water quality in North America.

However, it is important to note that access to drinking water is still a significant issue in some areas of North America, particularly among marginalized communities. Efforts to improve water access and quality must continue to ensure that everyone has access to this essential resource.

To know more about the average population refer here :

https://brainly.com/question/21181144#

#SPJ11

The balance and net ionic equation are;

1. Ca (s) + Br2 (l) → CaBr2 (s)

2. HNO3 (aq) + BaCl2 (aq) → Ba(NO3)2 (aq) + 2HCl (aq)

3. C7H16 (l) + 11O2 (g) → 7CO2 (g) + 8H2O (l)

4. balanced equation:Cl2 (g) + 2KI (aq) → 2KCl (aq) + I2 (s),

Net ionic equation:

Cl2 (g) + 2I- (aq) → 2Cl- (aq) + I2 (s)

5. Zn (s) + Ca(NO3)2 (aq) → No reaction (since Ca is less reactive than Zn)

6. 2Na3PO4 (aq) + 3Mg(NO3)2 (aq) → Mg3(PO4)2 (s) + 6NaNO3 (aq)

Net ionic equation: 2PO4^3- (aq) + 3Mg^2+ (aq) → Mg3(PO4)2 (s)

7. 2Al (s) + 3ZnCl2 (aq) → 2AlCl3 (aq) + 3Zn (s)

8. 2Fe2O3 (s) → 4Fe (s) + 3O2 (g)

9. Balanced equation: LiOH (aq) + HCl (aq) → LiCl (aq) + H2O (l)

Net ionic equation: OH- (aq) + H+ (aq) → H2O (l)

10A. Solid sodium in water.

2Na (s) + 2H2O (l) → 2NaOH (aq) + H2 (g)

10B. What would happen if you bring a burning splint to the previous reaction?

10 C - The burning splint would go out (since the H2 produced in the reaction may ignite and cause a "pop" sound, but the burning splint itself would go out).

A balanced equation is a chemical equation with equal numbers of atoms for each element on both sides, following the law of conservation of mass.

A net ionic equation is a simplified version of a balanced equation that only shows species participating in the reaction as ions, excluding spectator ions that remain unchanged throughout the reaction. This highlights the actual chemical changes occurring in the reaction.

Find more exercises on net ionic equation;

https://brainly.com/question/22885959

#SPJ1

The cell notation for the given galvanic cell is:

Zn(s) | Zn(NO3)2(aq) || KNO3(aq) || AgNO3(aq) | Ag(s)

In this notation, the anode is on the left-hand side and the cathode is on the right-hand side, separated by the double vertical lines representing the salt bridge. The solid electrode is represented on the left-hand side of the vertical line, and the corresponding aqueous solution is shown on the right-hand side. The half-cell reactions occur at the respective electrodes. In this case, the oxidation half-reaction occurs at the zinc electrode, and the reduction half-reaction occurs at the silver electrode.

Also, Zn(s) | Zn(NO3)2(aq) || KNO3(aq) || AgNO3(aq) | Ag(s)

To know more about galvanic cell, here

brainly.com/question/13031093

#SPJ4

The molarity of 0.50 moles of CaCl₂ in 3500 mL of solution is approximately 0.143 M.

To calculate the molarity of 0.50 moles of CaCl₂ in 3500 mL of solution, follow these steps:

1. Convert the volume of the solution from milliliters (mL) to liters (L). There is 1000 mL in 1 L, so divide the given volume by 1000:
  3500 mL ÷ 1000 = 3.5 L

2. Use the formula for molarity (M), which is the number of moles of solute (in this case, CaCl₂) divided by the volume of the solution in liters (L):
  M = moles of solute/volume of solution in L

3. Plug in the values given in the problem: 0.50 moles of CaCl₂ and 3.5 L of solution:
  M = 0.50 moles / 3.5 L

4. Calculate the molarity:
  M ≈ 0.143 M

Learn more about molarity at https://brainly.com/question/30404105

#SPJ11

The chemical reaction is

2 K + Na2O -> K2O + 2 Na

The given chemical equation represents a reaction between potassium (K) and sodium oxide (Na2O). The products formed in this reaction are potassium oxide (K2O) and sodium (Na).

On the reactant side, we have two atoms of potassium and two atoms of sodium, while on the product side, we have two atoms of potassium and two atoms of sodium as well.

Therefore, the equation is already balanced with respect to the number of potassium and sodium atoms.

However, we need to balance the oxygen atoms. On the reactant side, we have one molecule of Na2O, which contains two atoms of oxygen. On the product side, we have one molecule of K2O, which also contains two atoms of oxygen. Thus, the equation is balanced.

Finally, we can write the balanced equation as:

2 K + Na2O → K2O + 2 Na

To know more about  chemical equation refer here:

https://brainly.com/question/30087623

#SPJ11

- Dialcohol: used in polyester synthesis
- Diester: used in polyester synthesis
- Dinitrodiacid: neither polyester nor nylon synthesis
- Diamine: used in nylon synthesis
- Diether: neither polyester nor nylon synthesis

1. Dialcohol: This type of bifunctional molecule is used in the synthesis of polyesters. Polyesters are formed through the condensation reaction between a dialcohol and a diacid or diester.

2. Diester: Diesters are also used in the synthesis of polyesters. They react with dialcohols to form polyester chains.

3. Dinitrodiacid: Dinitrodiacids are not commonly used in the synthesis of either polyesters or nylons. Their nitro functional groups make them less reactive for the condensation reactions required for these polymer types.

4. Diamine: Diamines are used in the synthesis of nylons. Nylons are formed through the condensation reaction between a diamine and a diacid or a diester with a specific type of functional groups, such as adipoyl chloride.

5. Diether: Diethers are not used in the synthesis of polyesters or nylons. They lack the necessary functional groups (alcohol, ester, or amine) for the condensation reactions needed to form these polymers.

Learn more about polyesters at https://brainly.com/question/13094865

#SPJ11

The standard free energy change (∆G°) for the given reaction at 298K is -474.26 kJ/mol.

The given reaction is: [tex]2H_2(g) + O_2(g) - > 2H_2O(g)[/tex]

The standard free energy change (∆G°) for the given reaction can be calculated using the equation:

∆G° = Σ∆G°f(products) - Σ∆G°f(reactants)

Where ∆G°f is the standard free energy of formation for each compound in the reaction at standard conditions (298K and 1 atm pressure).

Using the standard free energy of formation values from tables, we get:

∆G° = 2(-237.13 kJ/mol) - [2(0 kJ/mol) + 1(0 kJ/mol)]

∆G° = -474.26 kJ/mol

The negative value indicates that the reaction is exergonic and spontaneous under standard conditions.

To know more about standard free energy, here

brainly.com/question/13625901

#SPJ4

--The complete Question is, What is the standard free energy change, ∆G°, in kJ, for the following reaction at 298K?

2H2(g) + O2(g) -> 2H2O(g) --

The net acid-base reaction that occurs when HBr is added to water can be represented as HBr + H₂O → H₃O + Br⁻

When HBr is added to water, it dissociates into its constituent ions, H+ and Br-. These ions then interact with the water molecules, leading to the formation of hydronium ions (H₃O⁺) and bromide ions (Br⁻). This reaction is known as a proton transfer reaction, as a proton (H+) is transferred from the acid (HBr) to the water molecule (H2O) to form a hydronium ion (H₃O⁺).

This reaction can also be understood in terms of the Arrhenius theory of acids and bases, which defines acids as compounds that release hydrogen ions (H⁺) when dissolved in water. In this case, HBr is an acid that releases H⁺ ions when dissolved in water, leading to the formation of the hydronium ion (H₃O⁺).

The reaction between HBr and water is an example of an acid-base reaction, where the acid (HBr) donates a proton to the water molecule (H₂O) to form the hydronium ion (H₃O⁺), which is the conjugate acid of water. The bromide ion (Br⁻) is the conjugate base of HBr.

To know more about the Acid-base reaction, here

https://brainly.com/question/29460273

#SPJ4

The reaction of 4.30 mol of magnesium with an excess of oxygen produces 6.40 mol of magnesium oxide (MgO).

Magnesium oxide is a white, odorless inorganic compound composed of magnesium and oxygen atoms. It is a strong basic oxide and an important mineral component of many rocks and soils. It has a wide range of industrial uses, such as in the production of cement, ceramics, and glass. It is also used as an antacid and laxative, and as a supplement to increase dietary magnesium intake.

The energy released in this reaction can be determined using the following equation:E = ΔHf (MgO) x (6.40 mol MgO)

In this equation, ΔHf (MgO) is the molar enthalpy of formation of magnesium oxide. The molar enthalpy of formation of magnesium oxide is -601.8 kJ/mol. Therefore, the total energy released in this reaction is:

E = -601.8 kJ/mol x (6.40 mol MgO)

E = -3,854.7 kJ.To determine the number of grams of MgO produced, we can use the following equation: Mass (MgO) = (6.40 mol MgO) x (Molar mass MgO) .

The molar mass of MgO is 40.3 g/mol. Therefore, the mass of MgO produced is: Mass (MgO) = (6.40 mol MgO.

To learn more about magnesium oxide

https://brainly.com/question/30333465

#SPJ4

Answer:

15717.124

Explanation:

124 moles of FeCl2.

The molar mass of FeCl2 is 126.751 g/mol.

To find grams of FeCl2, multiply the number of moles by its molar mass.

124 moles * 126.751 g/mol  = 15717.124 grams.

You can check the ending unit. moles * grams / moles leaves just grams, which is the answer you're looking for.

The final volume of the gas is 31.4 L when cooled from 45.0°C to 12.0°C.

The Charles's law states the relationship between the volume and the temperature of a gas when the pressure is constant. We can use the formula for the relationship between volume and temperature of a gas: [tex]\frac{V_{1} }{T_{1} }[/tex] = [tex]\frac{V_{2} }{T_{2} }[/tex]

where [tex]V_{1}[/tex] and [tex]T_{1}[/tex] are the initial volume and temperature, and [tex]V_{2}[/tex] and [tex]T_{2}[/tex] are the final volume and temperature.

We are given [tex]V_{1}[/tex] = 35.0 L and [tex]T_{1}[/tex] = 45.0°C = 45.0°C + 273.15 = 318.15 K,

and we need to find [tex]V_{2}[/tex] when [tex]T_{2}[/tex] = 12.0°C = 12.0°C + 273.15 = 285.15 K .  

Now by using the formula:

35.0 L / 318.15 K = [tex]V_{2}[/tex] / 285.15 K

[tex]V_{2}[/tex] = (35.0 L / 318.15 K) × 285.15 K

[tex]V_{2}[/tex] = 31.4 L

Therefore, the final volume of the gas is 31.4 L when cooled from 45.0°C to 12.0°C.

To know more about Charles's law visit:

https://brainly.com/question/16927784

#SPJ11

One way to reduce the volume of hydrogen gas needed to power a car for 400 km is to use a technology called on-board hydrogen storage.

This involves compressing the hydrogen gas to very high pressures, typically between 5,000 and 10,000 psi, which significantly reduces its volume.

Another method is to use liquid hydrogen storage, which involves cooling hydrogen gas to its boiling point (-423.17°F or -252.87°C) and storing it in a cryogenic tank. At this temperature, hydrogen gas is in its liquid state and takes up much less space than when it is in its gaseous state.

Both of these methods of hydrogen storage can greatly reduce the volume of hydrogen needed to power a car for 400 km, making hydrogen fuel cell cars more practical and feasible for everyday use.

To know more about hydrogen gas, refer here:

https://brainly.com/question/143551553#

#SPJ11

Answer:

cellular respiration

Explanation:

Living animals release carbon back into the carbon cycle through the process of respiration. During respiration, animals take in oxygen and release carbon dioxide as a waste product. This carbon dioxide can be taken up by plants during photosynthesis and used to build organic compounds, which can then be consumed by other animals, continuing the carbon cycle. Additionally, when animals defecate or when their bodies naturally decompose after death, the organic matter can be broken down by decomposers, such as bacteria and fungi, which release carbon back into the cycle as well.

I just finished my biology class in high school with an A. Trust me lol

Hope you have a nice day

Answer:

One process that returns carbon from living animals to the cycle is cellular respiration. Cellular respiration converts the organic carbon in the food molecules into carbon dioxide gas, which is released into the atmosphere or water. Another process that returns carbon from living animals to the cycle is excretion1. Excretion removes waste products that contain carbon, such as urea and uric acid, from the body of animals. These waste products can be decomposed by bacteria and fungi, releasing carbon dioxide back into the environment.

Explanation:

In a conversation between myself and a friend about a job agency and its reliability, we would discuss the following points:

1. Friend: "Hey, have you heard about the XYZ Job Agency? I'm considering using their services to find a new job."

2. Me: "Yes, I have heard of them. They are known for connecting job seekers with potential employers. They specialize in various industries, which is a plus. However, it's essential to research their success rate and client feedback to determine their reliability."

3. Friend: "That's a good idea. I'll look into their reviews and testimonials to see what others have experienced with their services."

4. Me: "Another important aspect to consider is the type of positions they primarily offer. Are they mainly temporary roles or long-term positions? Depending on your career goals, this information could be crucial in your decision-making process."

5. Friend: "True, I'll make sure to check the job types they provide. I'm looking for something stable and long-term."

6. Me: "Lastly, you might want to inquire about any fees or charges associated with using their services. Some job agencies charge the job seeker, while others receive their payment from the employer. This could impact your overall experience with the agency."

7. Friend: "Thanks for the advice. I'll definitely consider all these factors before deciding whether to use the XYZ Job Agency. I appreciate your input!"

By following this conversation, we covered the key aspects of a job agency's reliability, such as their success rate, client feedback, job types offered, and fees associated.

To know more about reliability refer here

https://brainly.com/question/30154360#

#SPJ11

The changes that occur in the parent nucleus during gamma decay are limited to the emission of a gamma ray and the associated decrease in energy. The mass and atomic number of the nucleus remain unchanged.

In gamma decay, the parent nucleus does not undergo any changes in terms of its mass or atomic number. Instead, the nucleus emits a gamma ray, which is a high-energy photon. This gamma ray is released as the nucleus transitions from an excited state to a lower energy state.

The emission of a gamma ray does not affect the number of protons or neutrons in the nucleus. This means that the atomic number and mass number of the nucleus remain the same before and after gamma decay.

However, the emission of a gamma ray does result in a decrease in the energy of the nucleus. This is because gamma rays have a very high frequency and carry a lot of energy. By releasing a gamma ray, the nucleus is able to shed some of this excess energy and move to a lower energy state.

For more such questions on nucleus

https://brainly.com/question/5223117

#SPJ11

The number of moles in the gas is 0.00262 mol and the molar mass of the unknown gas is 79.0 g/mol.

The volume of gas = 72.5 ml

The temperature of gas = 68.0°c

Pressure =  0.980 atm

Mass = 0.207 g

To calculate the molar mass of the gas, we need to estimate the number of moles using the ideal gas law equation. The formula is:

PV = nRT

The temperature must be converted to Kelvin scale and also volume to Litres.

Volume = 72.5 mL = 0.0725 L

Temperature = 68.0 + 273.15 = 341.15 K

Substituting the values in the equation,

n = PV/RT = (0.980 atm) * [(0.0725 L)/(0.08206 L·atm/mol·K)] * (341.15 K)

n= 0.00262 mol

The molar mass of the gas is calculated as:

molar mass = mass/number of moles

molar mass = 0.207 g / 0.00262 mol

molar mass = 79.0 g/mol

Therefore, we can conclude that the molar mass of the unknown gas is 79.0 g/mol.

To learn more about Molar mass

https://brainly.com/question/22997914

#SPJ4

To determine the mass of copper (II) sulfate in the hydrate, we need to understand the concept of a hydrate. A hydrate is a compound that has water molecules bound to it. Copper (II) sulfate is a hydrate, meaning it has water molecules attached to it. To find the mass of copper (II) sulfate in the hydrate, we need to remove the water molecules from the compound and calculate the remaining mass of the anhydrous salt.

To do this, we need to use the molar mass of the hydrate and the molar mass of the anhydrous salt. The molar mass of copper (II) sulfate pentahydrate is 249.68 g/mol, and the molar mass of anhydrous copper (II) sulfate is 159.61 g/mol. This means that the water molecules in the hydrate account for 90.07 g/mol of the total mass.

Now, let's assume we have 5 grams of the hydrate. We can use this information to calculate the mass of copper (II) sulfate in the hydrate. First, we need to calculate the number of moles of the hydrate by dividing the mass by the molar mass:

5 g / 249.68 g/mol = 0.02002 mol
Next, we need to calculate the number of moles of water in the hydrate by multiplying the total number of moles by the molar mass of water:

0.02002 mol x 18.015 g/mol = 0.3609 g
Finally, we can calculate the mass of anhydrous copper (II) sulfate by subtracting the mass of water from the total mass of the hydrate:
5 g - 0.3609 g = 4.6391 g

Therefore, the mass of copper (II) sulfate in the hydrate is:

4.6391 g * (159.61 g/mol / 249.68 g/mol) = 2.9647 g

In conclusion, to find the mass of copper (II) sulfate in the hydrate, we need to subtract the mass of water from the total mass of the hydrate and then convert the remaining mass to the mass of anhydrous copper (II) sulfate.

To kno wmore about hydrate refer here

https://brainly.com/question/11202174#

#SPJ11

The pressure inside a container that contains 25 grams of argon is 0.34 atm.

The pressure inside a container can be calculated using the following expression;

PV = nRT

Where;

According to this question, 25 grams of argon in a container has a volume of 60 liters and at a temperature of 400 K.

P × 60 = 0.625 × 0.0821 × 400

60P = 20.525

P = 0.34 atm

Learn more about pressure at: https://brainly.com/question/18124975

#SPJ1

The theoretical yield of silver chloride is 5.05 grams.

The percentage yield of silver chloride is 72.1%.

The balanced chemical equation for the reaction between silver nitrate and sodium chloride is:

AgNO3 + NaCl → AgCl + NaNO3

a. To determine the theoretical yield of silver chloride, we need to calculate the amount of silver chloride that would be produced if all of the silver nitrate reacted. We can use stoichiometry to do this.

From the balanced equation, we see that 1 mole of silver nitrate reacts with 1 mole of sodium chloride to produce 1 mole of silver chloride. The molar mass of silver nitrate is 169.87 g/mol, and the molar mass of silver chloride is 143.32 g/mol.

First, we need to convert the mass of silver nitrate given to moles:

moles of AgNO3 = 5.98 g / 169.87 g/mol = 0.0352 mol AgNO3

Since the reaction is with excess NaCl, we know that all the silver nitrate will react, so the theoretical yield of AgCl is:

theoretical yield = 0.0352 mol AgCl x 143.32 g/mol = 5.05 g AgCl

Therefore, the theoretical yield of silver chloride is 5.05 grams.

b. To determine the percentage yield of silver chloride, we need to compare the actual yield (3.64 g) to the theoretical yield (5.05 g), and calculate the ratio as a percentage:

percentage yield = (actual yield / theoretical yield) x 100%

percentage yield = (3.64 g / 5.05 g) x 100% = 72.1%

Therefore, the percentage yield of silver chloride is 72.1%.

Learn more on theoretical yield here https://brainly.com/question/31082729

#SPJ1

Turtle refuges are usually created on beaches where turtles lay their eggs, hatch, and return to the sea. Therefore, beaches that are known as nesting grounds for sea turtles may be suitable for creating a turtle refuge.

In general, turtle nesting sites are characterized by sandy beaches, dunes, and undisturbed vegetation. Female sea turtles come ashore to lay their eggs on sandy beaches, and the hatchlings make their way to the ocean once they emerge from the nest.

Turtle refuges provide protection for these nesting sites, allowing the turtles to lay their eggs and for the hatchlings to safely make their way to the ocean.

It is important to note that the location of a turtle refuge should be based on careful research and consideration of a variety of factors, such as the species of turtles that inhabit the area, the presence of human and natural threats to the nesting sites, and the availability of resources and support for the conservation efforts.

For more question on Turtle click on

https://brainly.com/question/26173544

#SPJ11

Diiodine monoselenide is an inorganic compound with the chemical formula I2Se. It is a dark red solid that is sparingly soluble in water. The structure of diiodine monoselenide consists of a linear Se-I-I unit, with the selenium atom in the middle and the two iodine atoms on either side. This arrangement gives the compound a linear, V-shaped structure.

Diiodine monoselenide is an important compound in the field of materials science, as it exhibits some interesting properties. For example, it can be used as a precursor for the synthesis of various selenium-containing compounds, including organoselenium compounds, which are used in catalysis and medicine.

Additionally, diiodine monoselenide has been studied as a potential material for use in electronic devices, due to its semiconducting properties. In conclusion, diiodine monoselenide is an important inorganic compound that exhibits some interesting structural and material properties.

Its linear, V-shaped structure is due to the arrangement of the selenium and iodine atoms in a linear Se-I-I unit. This compound is used in the synthesis of various selenium-containing compounds and has potential applications in the field of electronics.

To know more about monoselenide  refer here

https://brainly.com/question/19960546#

#SPJ11

152 grams of [tex]C2H6[/tex]would release 152 kJ of energy when it condenses at its boiling point.

Assuming you meant "[tex]C2H6[/tex]" instead of "[tex]CH Ch[/tex]", the heat of vaporization of [tex]C2H6[/tex]is 30.1 kJ/mol. The molar mass of [tex]C2H6[/tex] is 30.07 g/mol.

To calculate the heat of vaporization for 152 g of [tex]C2H6[/tex], we need to first calculate the number of moles of [tex]C2H6[/tex]:

152 g / 30.07 g/mol = 5.05 mol

Then, we can calculate the energy released using the heat of vaporization:

5.05 mol x 30.1 kJ/mol = 152 kJ

Therefore, 152 grams of [tex]C2H6[/tex]would release 152 kJ of energy when it condenses at its boiling point.

To know more about boiling point refer to-

https://brainly.com/question/2153588

#SPJ11

The number of moles in the room depends on the temperature.

Assuming that the temperature and volume in the room are the same as those outside, we can use the ideal gas law to calculate the number of moles of gas in the room.

Ideal gas law is given by:

PV = nRT

Number of moles:

n = PV/RT

Since the temperature and pressure are the same in both cases, we can write:

n(room) = (P × V(room)) / RT

n(bulb) = (P × V(bulb)) / RT

We are given that the bulb contains 9.00 moles of gas at the same temperature and pressure as the room. Therefore, we can use the number of moles in the bulb to find the pressure and temperature:

n(bulb) = (P × V(bulb)) / RT

9.00 mol = (P × 61.0 L) / (R × T)

Similarly, for the room, we can write:

n(room) = (P × V(room)) / RT

n(room) = (P × 85.0 L) / (R × T)

P = (n × RT) / V

P = (PV / RT) × RT / V

P = nRT / V

We can use the value of n from the bulb to find the pressure and temperature:

9.00 mol × R × T / 61.0 L = P

P = 3.17 atm

Now we can use this value of pressure to find the number of moles in the room:

n(room) = (P × V(room)) / RT

n(room) = (3.17 atm × 85.0 L) / (R × T)

n(room) = (3.17 atm × 85.0 L) / (0.08206 L atm/mol K × T)

n(room) = 129.3 L atm / (R × T)

Therefore, the number of moles in the room depends on the temperature.

Learn more about volume Visit: brainly.com/question/27710307

#SPJ4

Add approximately 10.9 grams of pentanol to 250 mL of water to make a 5% solution by volume.

To make a 5% solution by volume with pentanol and water, you'll need to determine the volume of pentanol to be added to the 250 mL of water.

First, find the total volume of the solution:

Total volume = (Volume of pentanol + 250 mL) * 100

Next, calculate the volume of pentanol needed for a 5% solution:

Volume of pentanol = (5% * Total volume) / 100

Since the desired solution is 5% pentanol by volume:

5% * (Volume of pentanol + 250 mL) = Volume of pentanol
0.05 * (Volume of pentanol + 250) = Volume of pentanol

Now, solve for the volume of pentanol:

0.05 * Volume of pentanol + 12.5 = Volume of pentanol
-0.05 * Volume of pentanol = -12.5
Volume of pentanol = 13.16 mL (rounded to 3 significant figures)

Now, use the density of pentanol to find the mass of pentanol to be added:

Mass of pentanol = Volume of pentanol * Density of pentanol
Mass of pentanol = 13.16 mL * 0.825 g/mL
Mass of pentanol ≈ 10.9 g (rounded to 3 significant figures)

Therefore, you should add approximately 10.9 grams of pentanol to 250 mL of water to make a 5% solution by volume.

To know more about Volume-Density Calculations:
https://brainly.com/question/1354972

#SPJ11