Which of the following is NOT a maladaptive response of stress?

-withdrawal from spending time with family
- substance abuse
-unhealthy eating habits
-engaging in more exercise

The statement "the period of a circular motion is directly proportional to the frequency of that motion" is true. The circular motion is a movement in which an object moves in a circular path.

The direction of the circular motion is always changing, but the distance from the center remains constant. The period of circular motion is defined as the time it takes for one full revolution of the object, while the frequency of circular motion is defined as the number of complete revolutions the object makes in a given time interval.

This is because the period and frequency are inversely related to each other, meaning that if one value increases, the other value decreases, and vice versa.

This relationship can be represented by the equation: T = 1/f where T is the period and f is the frequency. Since this equation is inverse, it means that T and f are inversely proportional. Therefore, the statement is true.

To know more about frequency, refer here:

https://brainly.com/question/29739263#

#SPJ11

The animal's acceleration relative to Earth's gravity is approximately 0.188 m/s², and the external force exerted by the ground on the animal's feet is approximately 9.8x10⁻⁶N.

Kinematics equations describe how input movement at one or more joints defines the configuration of a mechanical system, such as a robot manipulator, in order to accomplish a task position or end-effector location.

Using the specified highest height (H) and the animal's vertical displacement (d = 0.3 m), let's first determine the jump's range (R):

tan(theta) = 4H/R

tan(theta) = 4(0.3)/0.77

theta = tan⁻¹(1.558) = 57.24 degrees

x = d/tan(theta) = 0.3/tan(57.24) = 0.210 m

Now that we know the animal's maximum height (H) and the acceleration caused by gravity (g = 9.8 m/s2), we can determine its starting vertical velocity (v_iy):

H = v_iy²/(2g)

v_iy = √(2gH) = √(29.80.3) = 1.72 m/s

v_y = v_iy - gt

0 = v_iy - gt_max

t_max = v_iy/g = 1.72/9.8 = 0.1755 s

F = mg = (0.0000010 kg)(9.8 m/s²) = 9.8x10⁻⁶N

Now, using the horizontal displacement (x) and the maximum journey time (t_max), we can determine the animal's acceleration in relation to Earth's gravity:

x = 0.5at²

a = 2x/t_max²

= 2(0.00077 m)/(0.1755 s)²

= 0.188 m/s².

To know more about acceleration visit:-

https://brainly.com/question/12550364

#SPJ1

2. The ability of the heart, blood, blood vessels, and lungs to supply enough oxygen and necessary fuel to the muscles during long periods of physical activity - g. Cardiorespiratory Endurance.

What are the muscles?

Muscles are specialized tissues in the human body that are responsible for movement, stability, and maintaining posture. There are three types of muscles in the body: skeletal, cardiac, and smooth muscles.

3. The muscle's ability to move a joint through a full range of motion - c. Flexibility

पं - This word is not provided in the question.

4. The ability of a muscle or muscles to repeat a movement many times or hold a position without stopping to rest - a. Muscular Endurance

5. The ability of a muscle or muscles to push or pull with its total force - d. Muscular Strength

An activity that places an additional force against the muscle or muscle group - f. Resistance Training

To know more about muscles, visit:

https://brainly.com/question/9883108

#SPJ1

A spherical object orbiting the sun that has objects of similar mass orbiting nearby or crossing its path is a dwarf planet.

A celestial entity that circles the sun and has enough mass to produce a spherical shape but has not completely purified its orbit of other trash or smaller particles is referred to as a dwarf planet. Dwarf planets, in contrast to planets, are said to circle other celestial bodies like asteroids and comets. Five dwarf planets in our solar system have been designated by the International Astronomical Union (IAU) : Ceres, Pluto, Haumea, Makemake, and Eris. These objects are categorized as a different category of solar system bodies because they are thought to be distinct from planets.

While dwarf planets have certain characteristics with planets, they lack the gravitational dominance necessary to be considered genuine planets. They are sufficiently massive to cause their self-gravity to draw them in a nearly circular form, but they have not yet swept other debris from their orbit.

Hence, a spherical object orbiting the sun that has objects of similar mass orbiting nearby or crossing its path is a dwarf planet.

To learn more about dwarf planets, refer to:

https://brainly.com/question/6681223

#SPJ4

Doctors are more concerned about a fever of a few degrees Celsius than a fever of a few degrees Fahrenheit because variations in body temperature are more easily understood and tracked in Celsius, which is the more popular and accurate temperature measure in the medical world.

If the human body temperature were 98.6 C (209.48 F), it would be a life-threatening condition because the temperature is well above the boiling point of water, and proteins in the body would denature, leading to irreversible damage to organs and tissues. In reality, a body temperature of 98.6 degrees Fahrenheit (37 degrees Celsius) is considered normal, while a fever is defined as a temporary increase in body temperature above this level.

Doctors worry more about a fever of a couple of degrees Celsius than a fever of a couple of degrees Fahrenheit because Celsius is the more widely used temperature scale in the medical community, and changes in body temperature are better understood and monitored in Celsius. Additionally, Celsius is a more precise temperature scale than Fahrenheit, with each degree Celsius representing a smaller change in temperature than each degree Fahrenheit. For example, a fever of 38.5 degrees Celsius (101.3 degrees Fahrenheit) is a more significant increase in body temperature than a fever of 100.4 degrees Fahrenheit, which is only 1.8 degrees Fahrenheit above normal.

Learn more about Fahrenheit here:

https://brainly.com/question/30719934

#SPJ1

Option 5: the main limitation on the efficiency of heat engines is due "friction in the moving parts of the engine can contribute to losses in efficiency. Lubrication and other measures can help to reduce these losses."

Heat engines, including internal combustion engines, are limited in their efficiency by the Second Law of Thermodynamics. This law states that in any energy transfer or conversion, some energy will be lost to the environment as waste heat. The first law of thermodynamics is also relevant here, as it states that energy cannot be created or destroyed, only transferred or converted from one form to another.

Environmental radical people, reaction forces due to Newton's Third Law, and other factors are not typically significant limitations on the efficiency of heat engines.

However, Option 5 is the correct answer "friction in the moving parts of the engine can contribute to losses in efficiency. Lubrication and other measures can help to reduce these losses."

For more such questions on friction

brainly.com/question/24338873

#SPJ11

Answer:

I think the answer is False

Explanation: If you look at the meaning of Horticulture

"the art or practice of garden cultivation and management".

They manage plants but can sell them afterward.

The ball will be caught by the thrower's right. The correct answer is option d.

When the merry-go-round is spinning counterclockwise, the person throwing the ball and the ball itself will have a tangential velocity in the counterclockwise direction. As the ball leaves the thrower's hand, it will continue to move in a straight line with this tangential velocity.

However, the ball is also subject to the circular motion of the merry-go-round, which means it will also have a centripetal acceleration towards the center of the merry-go-round.

As a result, the ball will follow a curved path towards the right of the thrower and will be caught by the thrower's right hand.

So, the correct answer is d. the ball caught to the thrower's right.

To know more about tangential velocity click here:

https://brainly.com/question/28738284

#SPJ11

The correct answer is: the second law of thermodynamics but not the law of conservation of energy.

The second law of thermodynamics is the fundamental law that distinguishes between the forward and backward directions of time. It states that the total entropy (disorder) of an isolated system will always increase over time in the forward direction. In the backward direction, entropy would decrease, which violates the second law.

The law of conservation of energy, on the other hand, does not distinguish between the forward and backward directions of time. It simply states that energy can neither be created nor destroyed, but only transformed from one form to another.

For more questions like thermodynamics visit the link below:

https://brainly.com/question/13002079

#SPJ11

The car battery has a rating of 89Ah, which implies that it can supply a current of 89 A for 1 hour before being completely discharged. If you leave your headlights on until the battery is completely dead, the amount of charge that leaves the battery is 320400 coulombs.

The amount of charge that leaves the battery is given by:

C = I × t

where C is the charge, I is the current, and t is the time taken.

In this case, the current I = 89 A and the time t = 1 hour = 3600 s

Therefore, the charge that leaves the battery is:

C = 89 A × 3600 s

C = 320400 C

Therefore, 320400 coulombs is The amount of charge that leaves the battery.

For more such questions on charge, click on:

https://brainly.com/question/25923373

#SPJ11

The final speed of the rock is approximately 2.1 km/s.

We can use the formula for escape velocity to find the height of the rock above the asteroid's surface. The escape velocity is given by the formula:

v_esc = sqrt(2GM/R)

where G is the gravitational constant, M is the mass of the asteroid, and R is the radius of the asteroid.

Rearranging the formula,

R = GM/v_esc^2

Substituting the given values,

R = (6.67 x 10^-11 Nm^2/kg^2) x (10^15 kg) / (34 m/s)^2

R = 2.26 x 10^6 m

Therefore, the height of the rock above the asteroid's surface is:

h = R - radius of asteroid

h = 2.26 x 10^6 m - (radius of asteroid)

Now, we can use the conservation of energy to find the final speed of the rock:

(1/2)mv^2 = mgh

Solving for v,

v = sqrt(2gh)

Substituting the given values, we get:

v = sqrt(2 x 9.81 m/s^2 x (2.26 x 10^6 m - (radius of asteroid)))

Asteroid radius = 1 km,

v = sqrt(2 x 9.81 m/s^2 x (2.26 x 10^6 m - (1)))

v = 2.1 km.

To know more about escape speed, here

brainly.com/question/15052554

#SPJ4

--The complete question is, the escape speed from a very small asteroid is only 34 m/s. if you throw a rock away from the asteroid at a speed of 43 m/s and radius 1 km, what will be its final speed?--

The average net force exerted by the floor on the ball during the collision is 26 N.

Average The arithmetic mean is determined by adding a set of numbers, dividing by their count, and then taking the result. The average of 2, 3, 4, 5, 7, and 10 is 5, which is the outcome of 30 divided by 6.

The momentum equation can be used to determine the ball's shift in momentum:

Δp = m(v2 - v1)

Δp = (0.60 kg)(5.2 m/s - 0 m/s)

Δp = 3.12 kg m/s

Utilizing the impulse-momentum theory, we can determine the average net force the floor applied to the ball during the collision:

J = Δp

F_avg * t = Δp

F_avg = Δp / t

where t is the time duration of the collision, which is given as 0.12 seconds.

F_avg = Δp / t = (3.12 kg m/s) / (0.12 s)

F_avg = 26 N

To know more about net force visit:-

https://brainly.com/question/18109210

#SPJ1

The figure that contains unconformities is the figure with both vertical and horizontal lines on it (top left).

In geology, an unconformity is a gap or break in the rock record that represents a period of time during which no new sediment was deposited, or the existing rock was eroded. Unconformities can be caused by a variety of geological processes, including tectonic uplift, erosion, sea level changes, and volcanic activity.

Unconformities are important features in geology because they provide clues to the geological history of an area. By studying the nature and location of unconformities, geologists can reconstruct the sequence of events that led to the formation and deformation of the rock layers, and can gain insights into the tectonic and environmental processes that shaped the Earth's surface over time.

Find out more on unconformity here: https://brainly.com/question/1578509

#SPJ1

The acceleration of the rocket can be determined using Newton's second law of motion.

This law states that the net force acting on an object is equal to its mass multiplied by its acceleration, or F = ma. The net force acting on the rocket is equal to the thrust generated by the exhaust gas, minus the gravitational force. The thrust generated by the exhaust gas is equal to the rate of change of momentum of the gas, which is equal to the mass of the gas multiplied by the exhaust speed.

Thus, the acceleration of the rocket can be calculated as a = (m_gas*v_exhaust - m_rocket*g)/m_rocket, where m_gas is the mass of the gas being exhausted, v_exhaust is the exhaust speed, m_rocket is the mass of the rocket and g is the acceleration due to gravity. Using the given values, the acceleration of the rocket is calculated to be 7.97 m/s2.

Know more about Acceleration here

https://brainly.com/question/12550364#

#SPJ11

The change in internal energy of the system is -1650 J. This means that the internal energy of the system has decreased by 1650 J due to the heat leaving the system and the work done on the system by the surroundings.

The change in internal energy (ΔU) of the system can be calculated using the first law of thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system:

ΔU = Q - W

where ΔU is the change in internal energy, Q is the heat added to the system, and W is the work done by the system.

In this case, the system releases 1 kJ (1000 J) of heat, which means that Q = -1000 J (negative sign because heat is leaving the system). Additionally, 650 J of work is done on the system by the surroundings, which means that W = 650 J (positive sign because work is being done on the system).

Plugging these values into the equation above, we get:

ΔU = Q - W

ΔU = (-1000 J) - (650 J)

ΔU = -1650 J

Therefore, the change in internal energy of the system is -1650 J. This means that the internal energy of the system has decreased by 1650 J due to the heat leaving the system and the work done on the system by the surroundings.

For more such questions on internal energy  , Visit:

https://brainly.com/question/30702359

#SPJ11

It is better to send 10,000 kW of electric power longdistances at 10,000 V rather than at 220 V because the insulation is more effective at high voltages more current is transmitted at high voltages.

Insulation is a material that is used to reduce the transfer of heat, sound, or electricity between two objects or spaces. In buildings, insulation is used to keep the indoor temperature stable by preventing heat from escaping during cold weather and from entering during hot weather. Insulation can be made from a variety of materials, such as fiberglass, cellulose, foam, and mineral wool.

Insulation works by trapping air in small pockets, which reduces the amount of heat that can pass through the material. The effectiveness of insulation is measured by its thermal resistance, or R-value, which indicates how well it can resist the flow of heat. In addition to its thermal properties, insulation can also provide soundproofing and electrical insulation.

To learn more about Insulation visit here:

brainly.com/question/30891246

#SPJ4

The pressure inside the sealed bag of potato chips at the factory is approximately 101,325 Pa.

To find the pressure inside the bag of potato chips in pascals (Pa), you need to convert the given pressure from mm Hg to pascals:

1. The given pressure at the factory is 761.3 mm Hg.
2. We need to convert this pressure to pascals.
3. Use the conversion factor: 1 mm Hg = 133.322 Pa.
4. Multiply the given pressure by the conversion factor: 761.3 mm Hg * 133.322 Pa/mm Hg.

So, the pressure inside the bag of potato chips in pascals is 101,325 Pa (rounded to the nearest whole number).

To know more about pressure click here:

https://brainly.com/question/14370233

#SPJ11

Answer: C (Irradiance)

Explanation:

It is a fact

The term for sunlight intensity is called "irradiance." (C)

Sunlight intensity, or irradiance, is a measure of the amount of solar energy falling on a surface per unit of time, typically expressed in watts per square meter (W/m²). It is an important factor to consider in various fields, such as solar energy production, agriculture, and climate studies.

Irradiance can vary depending on factors such as time of day, geographic location, and atmospheric conditions.

Unlike glow, which refers to a gentle light, or luminosity, which describes the amount of light emitted by an object, irradiance specifically focuses on the power of sunlight reaching a given surface.

To know more about luminosity click on below link:

https://brainly.com/question/20105593#

#SPJ11

Using the right-hand rule, we can conclude that the direction of the current in the solenoid, as viewed from the top, is counter-clockwise. Therefore, the correct answer is option (B) "counterclockwise."

The direction of the current in a solenoid, as viewed from the top, depends on the orientation of the solenoid and the direction of the magnetic field.

Assuming the solenoid is oriented vertically, with the top of the solenoid pointing upwards and the bottom pointing downwards, the direction of the current can be determined using the right-hand rule.

If we wrap our right hand around the solenoid with our fingers in the direction of the current (i.e. counter-clockwise, as viewed from the top), then our thumb will point in the direction of the magnetic field inside the solenoid.

By convention, the magnetic field inside a solenoid is directed from south to north (i.e. from the bottom of the solenoid to the top), so if we look down on the top of the solenoid, the magnetic field will be pointing downwards.

To learn more about solenoids

https://brainly.com/question/15504705

#SPJ4

The development of integrated photonics has been a key factor in increasing network speeds by enabling the transmission of large amounts of data over optical fibers.

photonics refers to the technology of creating optical devices and systems using semiconductor fabrication techniques, similar to those used in the production of electronic integrated circuits.

One of the most significant contributions of integrated photonics to increasing network speeds is the creation of photonic integrated circuits (PICs). PICs are made up of multiple optical components, such as lasers, modulators, and detectors, integrated onto a single chip. This integration enables faster and more efficient communication between the components, reducing signal loss and improving overall performance.

Learn about integrated photonics here https://brainly.com/question/19538214

#SPJ1

No, the distance to a star cannot be determined strictly by the intensity of its radiation.

Stars emit radiation in the form of electromagnetic waves across the entire electromagnetic spectrum. This includes everything from radio waves, microwaves, and infrared radiation to visible light, ultraviolet radiation, X-rays, and gamma rays. The specific types and amounts of radiation emitted by a star depend on its temperature, size, age, and other properties.

Most of the radiation emitted by stars is in the form of visible light, which is what allows us to see them in the night sky. The colors of stars, ranging from red to blue, indicate their temperature, with cooler stars appearing redder and hotter stars appearing bluer.

In addition to visible light, stars also emit ultraviolet radiation, which can cause damage to living cells and is absorbed by the Earth's atmosphere. X-rays and gamma rays are also emitted by some stars, particularly those that are very hot or undergoing extreme nuclear reactions, and can only be detected with specialized telescopes.

The radiation emitted by stars plays an important role in shaping the universe, influencing the formation and evolution of galaxies, stars, and planets. It is also the source of energy that powers life on Earth, as it is ultimately responsible for driving photosynthesis in plants and other organisms.

Here in the Question,

The intensity of a star's radiation can provide valuable information about its properties, such as its luminosity and surface temperature, distance estimation requires additional measurements and calculations.

One way to determine the distance to a star is through the method of parallax. This involves observing the apparent shift in a star's position against the background of more distant stars as the Earth moves in its orbit around the Sun. The amount of shift is measured and used to calculate the star's distance.

Another method is the use of standard candles, which are objects of known intrinsic brightness, such as certain types of supernovae or Cepheid variable stars. By comparing the observed brightness of a standard candle with its known intrinsic brightness, astronomers can determine its distance based on the inverse square law of radiation, which states that the intensity of radiation decreases with the square of the distance.

Therefore, while the intensity of a star's radiation provides important information about its properties, it is not sufficient to determine the star's distance, which requires additional measurements and calculations.

To learn about thermal energy click:

https://brainly.com/question/14193449

#SPJ2

To create a band pass filter from an inverting op amp configuration, one has to add a capacitor in parallel with the feedback resistor.

In an inverting op amp configuration, the input signal is applied to the inverting input terminal of the op amp through a resistor (R1), and the output signal is fed back to the inverting input terminal through a feedback resistor (R2).

To create a band pass filter, a capacitor is added in parallel with the feedback resistor. The capacitor blocks DC signals from the input, and allows AC signals to pass through to the output. The values of R1, R2, and the capacitor determine the center frequency and bandwidth of the filter.

Adding a capacitor in series with the input resistance would create a high pass filter, allowing only high frequency signals to pass through. Adding a capacitor in parallel with the input resistance would create a low pass filter, allowing only low frequency signals to pass through.

To know more about band pass filter, refer here:
https://brainly.com/question/27312673#
#SPJ11

A mass of 1.53 kg is attached to a spring and the system is undergoing simple harmonic oscillations with a frequency of 1.95 hz and an amplitude of 7.50 cm. The total mechanical energy of the system is 0.198 J.

The total mechanical energy of a system undergoing simple harmonic oscillations can be calculated using the formula:

E = (1/2) kA²

where E is the total mechanical energy of the system, k is the spring constant, and A is the amplitude of the oscillation.

To calculate the spring constant, you can use the formula:

k = (4π²m)/T²

where m is the mass attached to the spring, and T is the period of the oscillation, which can be calculated using the formula:

T = 1/f

where f is the frequency of the oscillation.

Substituting the given values into these formulas, we have:

k = (4π² × 1.53) / (1/1.95)²= 70.59 N/m

E = (1/2) × 70.59 × (0.075)²= 0.198 J

Therefore,  0.198 J is the total mechanical energy of the system.

For more such questions on mechanical energy, click on:

https://brainly.com/question/29803154

#SPJ11

In problem 5, the speed of the flake at the bottom of the bowl is (a) dependent on potential and kinetic energy, (b) same for a flake with twice the mass, and (c) increased due to initial downward speed.

To find the speed of the flake at the bottom of the bowl, we must consider the conservation of energy. Initially, the flake has potential energy (PE = mgh), which is converted into kinetic energy (KE = 1/2 mv^2) as it moves down the bowl.

Using the conservation of energy principle (PE_initial + KE_initial = PE_final + KE_final), we can solve for the final speed (v).

For part (b), the mass does not affect the final speed, as the potential energy is proportional to mass, and mass will cancel out when equating PE and KE.

For part (c), giving the flake an initial downward speed adds initial kinetic energy to the system. This will result in an increase in the final speed, as the flake has more energy to convert to kinetic energy as it reaches the bottom.

To know more about conservation of energy click on below link:

https://brainly.com/question/2137260#

#SPJ11

The change in volume of the metal block is approximately 7.5 x 10⁻⁸ m³ by using bulk modulus.

The change in volume of the metal block can be calculated using the bulk modulus of the material, which relates the change in pressure to the change in volume. The bulk modulus is a measure of the resistance of a material to compression. The change in volume can be given as:

ΔV = -V(ΔP / B)

where ΔP is the change in pressure, B is the bulk modulus, and V is the original volume of the block.

Therefore,

ΔV = -(2 x 10⁻³ m^3)(6.00 x 10⁴ Pa / B)

To find B for the metal block, we need to know the material it is made of. Let's assume it is made of steel, which has a bulk modulus of approximately 160 GPa (gigapascals) or 1.6 x 10¹¹ Pa.

Substituting B = 1.6 x 10¹¹ Pa, we get:

ΔV = -(2 x 10⁻³ )(6.00 x 10⁴ Pa / 1.6 x 10¹¹ Pa) ≈ -7.5 x 10⁻⁸ m³

Note that the negative sign indicates a fall in volume, as expected since the pressure increase would cause the metal block to compress slightly.

Therefore, the change in volume of the metal block is approximately 7.5 x 10⁻⁸ m³.

To learn more about bulk modulus, refer to:

https://brainly.com/question/10869375

#SPJ4

Section I: Overview of Investigation
The purpose of this lab was to determine the volume and mass of various objects, and then calculate their density. To achieve this, we used a displacement method for measuring volume and weighed the objects to obtain their mass. The procedure involved several steps, including understanding the lab assignment, being aware of safety equipment and their uses, knowing the steps of the experiment, taking notes on a lab notebook, reviewing the data sheets of chemical material safety, wearing the necessary safety gear, and having a complete understanding of the experiment.
Section II: Observations and Conclusions
In this lab, we used charts and tables to clearly display the data we collected. Each chart and table included an appropriate title, labels, and units of measurement. These visuals helped us better understand the relationship between the volume, mass, and density of the objects we analyzed.
If we were to repeat this lab and improve upon it, we would optimize the space for lab equipment, label areas for placing minor equipment, incorporate drawers under the lab counter, and train new researchers before they use the reactives and lab equipment. These improvements would make the lab environment more organized and efficient, and ensure that everyone involved has a clear understanding of the procedures and safety precautions.

for more such questions on Investigation

https://brainly.com/question/2115801

#SPJ11

An Electromagnetic wave has a frequency of 7.57 x 10^14 Hz. Its wavelength can be found using the formula:c = λfwhere c is the speed of light, λ is the wavelength, and f is the frequency.

Substituting the given values in the formula, we have:c = 3 x 10^8 m/sf = 7.57 x 10^14 Hzλ = ?λ = c/f = (3 x 10^8 m/s)/(7.57 x 10^14 Hz)= 3.95 x 10^-7 mTherefore, the wavelength of the electromagnetic wave is 3.95 x 10^-7 m.

To determine the part of the spectrum this wave belongs to, we can use the electromagnetic spectrum.The electromagnetic spectrum is a range of frequencies of electromagnetic radiation, which includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays.

The frequency of the given electromagnetic wave falls within the visible light spectrum, making it a light wave. Therefore, the electromagnetic wave belongs to the visible light part of the spectrum.

To Learn More About Electromagnetic

https://brainly.com/question/24319848

#SPJ11

The average acceleration of the intercontinental ballistic missile is approximately 108.33 m/s².

The student question is asking for the average acceleration of an intercontinental ballistic missile that goes from rest to a suborbital speed of 6.50 km/s in 60.0 s.

To calculate the average acceleration, we can use the formula:

Acceleration (a) = (Final Velocity (v) - Initial Velocity (u)) / Time (t)

Given the information, the missile starts from rest, so the initial velocity (u) is 0. The final velocity (v) is given as 6.50 km/s, and the time (t) is given as 60.0 s. We need to convert the final velocity from km/s to m/s for consistency.

1 km = 1,000 m
So, 6.50 km/s = 6,500 m/s

Now, we can plug the values into the formula:

a = (6,500 m/s - 0 m/s) / 60.0 s

a = 6,500 m/s / 60.0 s

a ≈ 108.33 m/s²

To learn more about :  intercontinental

https://brainly.com/question/23822725

#SPJ11

In hot arid regions, materials with low specific heat are the best for building envelopes. Specific heat refers to the amount of heat energy required to raise the temperature of a material by a certain amount.

Materials with low specific heat require less energy to raise their temperature, which means they heat up quickly during the day but also cool down rapidly at night. This is important in hot arid regions where temperatures can fluctuate drastically between day and night.

Some materials that work well in hot arid regions include adobe, rammed earth, and straw bale, as they have low specific heat and can help regulate the temperature inside the building.

Additionally, using insulation materials with low thermal conductivity, such as foam insulation or straw bale, can also help keep the building cool during the day and warm at night.

To know more about hot arid regions refer here:

https://brainly.com/question/12615379#

#SPJ11

The mass of the barbell is 10.965 kg if the clown retracts with a speed of 0.485 m/s and the barbell is hurled with a speed of 8.5 m/s.

If the clown recoils with a speed of 0.485 m/s and the barbell is thrown with a speed of 8.5 m/s, the mass, in kilograms, of the barbell can be calculated as follows:mv = -mv′

Using the law of conservation of momentum,m1v1 + m2v2 = m1v'1 + m2v'2

Given that the clown recoils with a speed of 0.485 m/s and the barbell is thrown with a speed of 8.5 m/s, we can equate the momenta to get: (0.2 kg) (0.485 m/s) + (m2) (8.5 m/s) = 0.485 m/s(m2 + 0.2 kg)On simplification, the mass of the barbell, m2 = 10.965 kg.

Learn more about  speed here:

https://brainly.com/question/17661499

#SPJ11