Answer:
A. 3.7×10^-5 km
Explanation:
Whenever there is scientific notation, you always move the decimal the amount of places that the exponent tells you. For a, you would move the decimal 5 times to the left and the km version will be equivalent to the cm version. I hope this helps!
The quantity is equivalent to 3.7 cm is 3.7×10⁻⁵ km. Therefore, option A is correct.
What do you mean by the scientific notation ?The term scientific notation is defined as a way of writing very large or very small numbers. A number is written in scientific notation when a number between 1 and 10 is multiplied by a power of 10.
For example, 650,000,000 can be written in scientific notation as 6.5 ✕ 10^8.
Scientific notation is used to simplify numbers that are too big.
In the scientific notation, you always displace the decimal the amount of places that the exponent tells you. Then would move the decimal 5 times to the left and the km version will be equivalent to the cm version.
Thus, The quantity is equivalent to 3.7 cm is 3.7×10⁻⁵ km, option A is correct.
To learn more about the scientific notation, follow the link;
https://brainly.com/question/18073768
#SPJ2
what is annulus class 9 modern book
A series of concentric circles make form the geometric shape known as the annulus. Each circle has the same radius, and there is an equal distance between them. Both the size of a circular region and the circumference of the circle can be determined using the annulus.
An animal or plant's annulus is a ring-shaped structure. The portion of the stem that holds the leaves in place on plants is known as the annulus. The stem's annulus, which similarly shrinks to let the plant move, is another example of this. The portion of the skeleton that encircles the spinal cord in animals is known as the annulus. The annulus helps to maintain the body upright while safeguarding the spinal cord.
A new ring is built on a molecule via the chemical reaction known as annulation in organic chemistry. Helicenes and acenes are two examples of side-on condensed cyclic segments that are used to build annular molecules.
To learn more about concentric circle refer- https://brainly.com/question/9466301
#SPJ9
Please need help ASAP
The effect of table salt and sugar on bubbles is that sugar makes it easier to blow and stronger whereas salt makes it difficult to blow bubbles.
(i) The combination in cup 2 made blowing bubbles simpler since the bubbles lasted longer; nevertheless, when the bubbles struck something, they popped just as easily as the ones in cup 1.
(ii) However, compared to cup 1, the combination in cup 3 made blowing bubbles more challenging.
(iii) Compared to salt, which did not mix well together with liquid dish detergent and made it more difficult to blow huge, forceful bubbles, sugar was an excellent ingredient to mix with liquid dish detergent.
(iv) If we were to carry out this experiment further, we may experiment with other materials in the cups to discover which ones the liquid dish detergent reacted best with. Using cups 4 and 5 for flour and brown sugar and cup 6 for pepper, respectively. Then, we would contrast these combinations with the cups that we had already examined.
Learn more about effect of table salt and sugar on bubbles here:
https://brainly.com/question/13136734
#SPJ9
Which of the following choices is the one that does NOT describe a chemical
property?
Concentrated hydrochloric acid will burn a hole in cotton jeans because the acid
breaks down the cellulose fibers in cotton.
Copper metal combines with substances in the air to form a green "patina" that
protects the copper from further reaction.
Copper compounds often form beautiful blue crystals when a solution of a given
copper compound is evaporated slowly.
Oven cleaners contain sodium hydroxide, which converts the grease/oil spatters
inside the oven to water-soluble materials, which can be washed away.
Hydrogen peroxide fizzes when it is applied to a cut or scrape.
The following choice is not a chemical property is Copper compounds often form beautiful blue crystals when a solution of a given copper compound is evaporated slowly.
Chemical Property is defined as the any substance's or particles properties that can be seen changing before and after is known as chemical property.
Ignitible, pH value, chemical stability are some of the properties of chemical property.
The other options are chemical property first one is burning a piece of cloth and leave another acid, another one is forming a gas, the another one is also changing the property into soluble form , and the last one is wound is fizzing so it is also a chemical property.
Hence, the option (c) isn't a chemical property.
To know more about Chemical Property here :
https://brainly.com/question/5186976?referrer=searchResults
#SPJ1
Three samples of granite were
massed. What is the total mass,
reported to the appropriate
number of significant figures?
67.4 g + 43.2 g + 27.3 g = [?] g please help i’m lost?!
The total mass , reported to the appropriate number of significant figures of three samples of granite when it were massed is 137.9 g .
Here we know that ,
Mass of the first granite sample = 67.4 g
Mass of the second sample = 43.2 g
Mass of the third sample = 27.3 g
We want to get the total mass for the three granite samples , then what we need to do is just add the three values that we know , this will give:
Total mass = 67.4 g + 43.2 g + 27.3 g = 137.9 g .
We conclude that the total mass of the three samples is 137.9 g .
To learn more about mass , please click here .
brainly.com/question/5493941
#SPJ1
use evidence to explain how advancements in technology influenced cell theory
The evidence to explain how advancements in technology influenced cell theory is the invention of microscopes. It has lead the way into the discovery of cells.
The magnification and resolution technology in microscopes have helped the scientists to observe the characteristics of cells and to understand the organization of the life.Cell theory is a scientific theory which was first formulated in the mid-nineteenth century. It states that the living organisms are made up of cells. All cells come from the pre-existing cells. Cells are the basic structural and organizational unit of all the organisms.Technology such as lenses, magnifying glasses, and microscopes had an impact on the development of the cell theory. Below are some examples of how such technologies contributed to the cell theory.The first time the word cell was used to refer to these tiny units of life was in 1665 by a British scientist named Robert Hooke.The invention of the microscope led to the discovery of the cell by Robert Hooke. He observed a box-shaped structures, which he called “cells” as it reminded him of the cells, or rooms, when he was looking at the cork. This discovery led to the formation of the cell theory.After Robert Hooke discovered cells in cork, Anton van Leeuwenhoek in Holland made other important discoveries using a microscope. Leeuwenhoek made his own microscope lenses. His microscope was more powerful than other microscopes of that time. Leeuwenhoek’s microscope was almost as strong as modern light microscopes. Leeuwenhoek used his microscope and became the first person to observe human cells and bacteria.These inventions led to advancements in cell theory.To learn more about cell theory,
brainly.com/question/1468725
#SPJ1
PLEASE HELP ME THERES 100 POINTS ON THE LINE
Answer:
1.93 2.86
Explanation:
exactly the reason for the above text
If 1.00 mol of argon is placed in a 0.500- L container at 24.0 ∘C , what is the difference between the ideal pressure (as predicted by the ideal gas law) and the real pressure (as predicted by the van der Waals equation)? For argon, a=1.345(L2⋅atm)/mol2 and b=0.03219L/mol .
Express your answer to two significant figures and include the appropriate units.
The difference between the ideal pressure and the pressure calculated by the Van Der Waal equation is 2.08 atm.
What is the pressure?In this problem, we are mandated to obtain the pressure both by the use of the ideal gas equation and then the use of the Van der Walls equation.
Using the idea gas equation;
PV = nRT
P = nRT/V
P = pressure
V = volume
n = number of moles
T = temperature
R = gas constant
P = 1 * 0.082 * (24 + 273)/0.5
P = 48.7 atm
Using the Van Der Wall equation:
P = RT/(V - b) - a /V^2
P = 0.082 * 297/(0.5 - 0.03219) - 1.345/(0.5)^2
P = 24.354/0.46781 - 1.345/ /0.25
P = 52 - 5.38
P = 46.62 atm
The difference between the ideal pressure and the pressure calculated by the Van Der Waal equation is; 48.7 atm - 46.62 atm = 2.08 atm
Learn more about ideal gas equation:https://brainly.com/question/3637553
#SPJ1
1) Complete the sentence: If a group 1 metal loses an electron, it has the electron configuration (2 correct answers)
A of the noble gas in the same period
B that has a full octet in the highest energy level
C that matches the group 17 nonmetal in the period before it
D of the noble gas in the period before it
2 Ionization energies for nonmetals are ____________ than metals because they would rather __________ electrons than lose electrons, so it takes ___________
A energy to remove an electron.
B higher, gain, more
C higher, gain, less
D lower, gain, less
HELP ME RIGHT NOW, PLEASE THANKS YOU
The accurate responses are;
1) it has the configuration of of the noble gas in the same period
2) higher, gain, more
What is the electron configuration?The electron configuration shows the arrangement of the atoms in an element. We know that in an element, the nucleus is at the core of the atom. The shells have energies increasing order with the shells that are close to the nucleus having the lowest energy and the energy of the shells tends to increase radially outwards from the nucleus.
Now let us try to look at sodium. We know that the formation of ions leads an element to attain the noble gas configuration. We can see that when sodium loses an electron, it closely resembles the noble gas neon.
The ionization energy is the energy that is required for the removal of one electron from the outermost shell of the atom. The complete statement therefore is; Ionization energies for nonmetals are higher than metals because they would rather gain electrons than lose electrons, so it takes more energy.
Learn more about electron configuration:https://brainly.com/question/13497372
#SPJ1
Steve races to the nearest taco stand at lunchtime and sees that his pedometer recorded his peak speed at 91.1 cm/s. What was Steve's peak speed in kilometers per hour?
The answer will be 3,279 km/hr.
Pedometer is a device used to measure the number of steps covered by a person.
Pedometer sensor = Step count and IMS sensor used.
Peak Speed rate recorded in the pedometer = 91.1 cm/s
1 Km = 100 * 1000 cm
1 hour = 60 * 60 = 3600 sec
Now, 1 cm = 10^-5 km
1 sec = 0.00027777777 hour
speed = 91.1 cm /s = 91.1 * 10^-5 / 0.00027777777 km/hour
speed = 3.279 km/hr
Steve's peak speed rate in km / hr would be 3.279 km/hr
To know more about Pedometer here :
https://brainly.com/question/12439423?referrer=searchResults
#SPJ1
Check all the formulas below that represent binary compounds.
NH4CL
CaS
P₂05
CaSO4
N₂O
Cl₂
Binary compound is a substance that is made up of precisely two separate components and cannot be further simplified chemically. Binary compounds include, for instance, H₂O, H₂S, and NH₃.
1. NH₄Cl - It is not a binary compound because it contains more than two elements that is Nitrogen, hydrogen and chlorine.
2. CaS - It is a binary compound because it contains two elements Calcium and sulfur.
3. P₂O₅ - It is a binary compound because it contains two elements Phosphorus and Oxygen.
3. CaSO₄ - It is not a binary compound because it contains more than two elements that is calcium, sulfur and oxygen.
4. N₂O - It is a binary compound because it contains two elements that is Nitrogen and Oxygen.
5. Cl₂- It is not a binary compound because it does not contain two different elements rather it is a diatomic molecule.
Diatomic molecules- Two atoms are chemically linked together to form diatomic molecules. A homonuclear diatomic molecule is created when two identical atoms combine, such as in the oxygen molecule (O₂). A heteronuclear diatomic molecule is created when two unidentical atoms combine, such as in the CO₂ .
To learn more about compounds refer- https://brainly.com/question/26487468
#SPJ9
What is the mass of an object with a density of 1.35 g/mL & a volume of 24 mL?
gas,
che
on ozunds
Answer:
32 grams
Explanation:
To find the mass of the object, you need to multiply the given volume by the denisty. The denisty ratio compares the mass of an object per every 1 mL. It is important to arrange the denisty ratio in a way that allows for the cancellation of units (mL should be in the denominator). The final answer should have 2 sig figs.
Denisty = 1.35 g/mL
24 mL 1.35 g
---------------- x ----------------- = 32.4 g = 32 g (correct sig figs)
1 mL
Previously cooked food must reheated to
Previously cooked food must reheated to temperatures of at least 165°F.
What temperature must previously cooked food must reheated to?When food is cooked, it should be eaten and any leftovers preserved.
Leftovers can be preserved by refrigeration.
However, when this refrigerated food is to be eaten again, it should be reheated before eating.
Previously cooked food must be heated to prevent spoilage and poisoning.
The addition of heat will prevent spoilage by:
Killing most microorganisms that may be present in the fooddenaturing the activity of the enzymes present in these organisms.Previously cooked food must reheated to temperatures of at least 165 °F.
The process of reheating the food may be done in microwave oven or over a stove.
Learn more about reheating food at: https://brainly.com/question/28452279
#SPJ1
4.00 x 10-2 mL of bromine (a liquid element) weigh 0.1249 g. What is the density of bromine?
The density of 4.00 mL x 10⁻² mL of bromine (liquid) weighing 0.1249 g is 3.1225 g/mL.
Density of a liquid is defined as the mass of the substance per unit of its volume. Density is equal to the mass divided by the volume of any liquid. It is denoted by a Greek letter ρ. It is given by -
ρ = m
v
where,
ρ = density
m = mass
v = volume
To calculate the density of bromine liquid,
We use,
Density = mass
volume
Density = 0.1249 g
4.00 x 10⁻² mL
Density = 3.12 g/mL
Therefore, the density of bromine liquid is 3.12 g/mL
To learn more about density,
brainly.com/question/23894494
#SPJ1
Which element, Oxygen (O) or Fluorine (F), has a smaller atomic radius?
O, because the attraction between protons and valence electrons is weaker.
F, because the attraction between protons and valence electrons is stronger.
F, because the attraction between protons and valence electrons is weaker.
O, because the attraction between protons and valence electrons is stronger.
Fluorine has a smaller ionic radius than oxygen, because the attraction between protons and valence electrons is stronger; option B
What is ionic radius?Ionic radius is the radius of an ion of an element.
The ionic radius of ions of elements depends on the nuclear charge as well as the number of electrons in the outermost shell of of an ion of an element.
The nuclear charge is the charge on the nucleus as a result of the positively-charged proton present in the nucleus. The proton exerts an attractive force on the electrons, thus reducing the size of the ion if nuclear charge increases.
The ionic radius of metallic ions decrease from left to right across the period table as a result of the increase in the nuclear charge of the ions.
However, the ionic radius of metals increase on going down a group in the periodic table.
Similarly, the ionic radius of non-metallic ions decrease from left to right across the period table as a result of the increase in the nuclear charge of the ions.
The ionic radius of non-metals also increase on going down a group i the periodic table.
Therefore, the ionic radius of oxygen will be greater than that of fluorine because of a smaller nuclear charge.
Learn more about ionic radius at: https://brainly.com/question/6965246
#SPJ1
HOCN(aq)⇄H+(aq)+OCN−(aq)Ka=3×10−4
The ionization of cyanic acid, HOCN, is represented above. A certain solution of HOCN has a pH of 2.0. What is the approximate concentration of unionized HOCN(aq) in the solution?
3×10^−4M
1×10^−2M
3×10^−1M
2×10^0M
The concertation of the undissociated acid is 3×10^−1M.
What is the concentration of the unionized acid?Now let us know that the acid dissociation constant shows the extent to which the acid would be dissociated in a given time. To obtain the concentration of the unionized acid, we need to first obtain the the concentration of the hydrogen ion.
Using;
pH = 2
[H^+] = Antilog (-2) = 0.01 M
Ka = [H^+] [OCN−]/HOCN
Given that [H^+] = [OCN−] = 0.01 M
Ka = [H^+]^2/HOCN
HOCN = [H^+]^2/3×10^−4
HOCN = (0.01)^2/3×10^−4
HOCN = 3×10^−1M
Learn more about acid dissociation:https://brainly.com/question/15012972
#SPJ1
Which type of energy is the total energy of kinetic energy and potential energy
in a system of objects?
A. sound energy
B. radiant energy
C. mechanical energy
The density of a solution of sulfuric acid is 1.8022g/cc and it is 88.00 percent by mass. What is the volume of the solution ( in millimetre) do you need to supply 43.0g of sulfuric acid.
Considering the definition of percentage by mass, you need a volume of solution of 20.9965 mL to supply 43 g of sulfuric acid.
Definition of percentage by massThe Percentage Composition is a measure of the amount of mass that an element occupies in a compound and indicates the percentage by mass of each element that is part of a compound.
The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:
percentage by mass= (mass of solute÷ mass of solution)× 100
Definition of densityDensity is a quantity that allows to measure the amount of mass in a certain volume of a substance.
The expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:
density= mass÷ volume
Volume of the solution neededIn this case, you know:
density of the solution of sulfuric acid= 1.8022 g/ccpercentage composition= 88 percent by massmass of the solution= 43 gFirst, you calculate the mass of sulfuric acid considering the definition of percentage by mass:
88= (mass of solute÷ 43 g)× 100
Solving:
88÷ 100= mass of solute÷ 43 g
0.88=mass of solute÷ 43 g
0.88×43 g= mass of solute
37.84 g= mass of solute
Now, the volume is calculated taking into account the definition of density:
1.8022 g/cc= 37.84 g÷ volume
Solving
1.8022 g/cc× volume= 37.84 g
volume= 37.84 g÷ 1.8022 g/cc
volume= 20.9965 cc= 20.9965 mL (being 1 cc= 1 mL)
Finally, you need a volume of solution of 20.9965 mL to supply 43 g of sulfuric acid.
Learn more about
percentage by mass:
brainly.com/question/19168984
brainly.com/question/18646836
density:
brainly.com/question/952755
brainly.com/question/1462554
#SPJ1
What laboratory equipment do you need to prepare 250 mL of a 0.010 M solution of NaCl from a stock solution?
The equipment we used to prepare 250 ml of a 0.010 M solution of NaCl from a stock solution is Volumetric flask (piece of lab).
It is calibrated to comprise a precise volume (v) at a given temperature.
It is used for accurate results in dilutions and to prepare a solutions that is needed according to the experiment.
Volumetric flask short form is vol flask.
A stock solution is defined as the standard solution made using nearly accurate experiment.
Example of stock solution - Two M sol of tris-HCL, 5M sol of NaCl.
Stock Solution formula = C1*V1 = C2*V2
To know more about Volumetric Flask here :
https://brainly.com/question/19517011?referrer=searchResults
#SPJ1
Identify the approximate bond angles for the following molecules.
Drag the appropriate items to their respective bins.
sulfur difluoride (SF₂) hydrogen sulfide (H₂S) carbon tetrafluoride (CF4)
chloroform (CHCl)
Bond angle 109.5
Bond angle <109.5
Bond angle >109.5⁰
The bond angle of sulfur difluoride (SF₂) is < 109.5 °
hydrogen sulfide (H₂S) Bond angle < 109.5 °
carbon tetrafluoride ([tex]CF_{4}[/tex]) is 109.5 °
and chloroform ([tex]CHCl_{3}[/tex]) is 109.5 ° .
The bond angle of sulfur difluoride and hydrogen sulfide is less than 109.5 ° due to repulsion in the two lone pair of the electron present in these molecule .
Electron repulsion between the linked pairs and bond angles rise as the central atom's remaining electron density increases . The higher bond angle of ammonia (106.6°) than [tex]NF_{3}[/tex] (102.2°) can also be attributed to the electronegativity theory .
To learn more about bond angle please click here ,
https://brainly.com/question/13751116
#SPJ1
Fe in Prussian blue, Fe4[Fe(CN)6]3 (a pigment used in paints and printing inks)
Express your answer using five significant figures. Determine the percent,by mass, for Fe
The percent by mass of iron in Prussian blue is 32.6%.
What is Prussian blue?The salt called Prussian blue is a salt that is of the family of the ferrocyanide salts. They are commonly used as dyes. This compound as it is know could be used as a blue dye in many quarters. In medicine it could be used to assist the body to expedite the elimination of certain elements or harmful chemicals from the body.
We are here mandated to obtain the percent by mass of the iron atom in the Prussian blue;
Molar mass of Prussian blue = 859
Mass of iron in Prussian blue = 5(56) = 280
Percent by mass of Prussian blue = 280/ 859 * 100 = 32.6%
Learn more about percent by mass:https://brainly.com/question/14990953
#SPJ1
Question 7 of 10
What property is used to calculate the pH of a solution?
Answer:
The hydrogen ion concentration in mol/L
Explanation:
Answer:
The pH of a solution is a measure of hydrogen ion concentration in mol/L
Explanation:
the concentration of hydrogen ions in a solution expressed usually in moles per liter or in pH units and used as a measure of the acidity of the solution
Hydroxyapatite, Ca5(PO4)3(OH), is the main mineral component of dental enamel, dentin, and bone, and thus it has many medical uses. Coating it on metallic implants (such as titanium alloys and stainless steels) helps the body accept the implant. In the form of powder and beads, it is used to fill bone voids, which encourages natural bone to grow into the void. Hydroxyapatite is prepared by adding aqueous phosphoric acid to a dilute slurry of calcium hydroxide.
(a) Write a balanced equation for this preparation. Be sure to include the state of each reactant and product in the equation. Hint: Liquid water is one of the products of this reaction.
(b) What mass of hydroxyapatite could form from 128 g of 95.0% phosphoric acid and 113 g of calcium hydroxide?
g Ca5(PO4)3(OH)
The equation of the reaction is 5Ca(OH)₂ + 3H₃PO₄ ---> Ca₅(PO₄)₃(OH) + 9H₂O. The mass of hydroxyapatite that could form is 159.7 g
What is the equation of the reaction?We know that it is not possible to obtain the solutions to a problem of this sort unless we are able to obtain the balanced reaction equation. This is the only way that we are able to apply the stoichiometry solve the problem.
We have the balanced reaction equation as;
5Ca(OH)₂ + 3H₃PO₄ ---> Ca₅(PO₄)₃(OH) + 9H₂O.
Number of moles acid = 128 g /98.00 g/mol = 1.31 moles
Number of moles of calcium hydroxide = 113 g/ 74 g/mol = 1.59 moles
If 5 moles of calcium hydroxide reacts with 3 moles of acid
1.59 moles of calcium hydroxide reacts with 1.59 moles * 3 moles / 5 moles
= 0.954 moles
Hence calcium hydroxide is the limiting reactant.
Now;
5 moles of calcium hydroxide yields 1 mole of hydroxyapatite
1.59 moles of calcium hydroxide yields 1.59 moles * 1 mole /5 moles
= 0.318 moles of hydroxyapatite
Mass of hydroxyapatite = 0.318 moles * 502.3 g/mol
= 159.7 g
Learn more about hydroxyapatite :https://brainly.com/question/12797496
#SPJ1
What is the circumference of a circle
with a radius of 28 m?
175.93m hope this helps
The density of the object
is 3.0 g/mL.
What is its density in g/cm3?
density = [?] g/cm³
Round your answer to the tenths place.
Density (g/cm³)
Enter
The density of the object in g/cm³ is 3.0 .
Since the one mililiter is equal to one centimeter cube .
The density of the object is determined using the following formula and can be stated numerically as the mass per unit volume .
So, density = mass / volume = g / ml = g / cm³
While any unit of mass and volume can be used to compute density , like grams ( g ) and millilitres ( ml ) are the most often used units . As a result , density is expressed in grams per millilitre ( g/ml ) . The density is expressed in grams per centimeter cube also .
to learn more about density please click here ,
https://brainly.com/question/15164682
#SPJ1
Answer:
3.0
Explanation:
3. Considering
both objects
that are about to collide in
each interaction, which system
would you predict to have the
least amount of total kinetic
energy in the system right
before the objects collide? In
each instance below, player
#84 is running at a speed of 7
miles per hour. Explain in
words and pictures using the
image on why the system you
chose would have the least
amount of total kinetic energy
before the collision by
comparing it with the two
other systems.
In a collision between two objects both objects experience forces of equal magnitude and in opposite directions. Such forces often cause one object to accelerate and gain momentum, and another to decelerate and lose momentum.
The kinetic energy of the whole system before the collision equals the kinetic energy of the whole system after the collision. If all the kinetic energy is not conserved, the collision is called an inelastic collision. For collisions between two objects, momentum is conserved. The initial momentum is non-zero, so the final momentum is non-zero. Both objects cannot be at rest. It is possible that one of the objects remained after the collision.
When two cars collide your car pushes the other car. According to Newton's 3rd law, this car is pushing your car in the opposite direction with the same force. This power slows you down. In a collision, objects always encounter momentum and momentum changes. In a collision, the momentum received by an object equals the change in velocity. The velocity change of the two objects involved in the collision is always the same.
Learn more about kinetic energy here:-https://brainly.com/question/114210
#SPJ1
In Chemistry we look at the composition and the_
change Y
of matter
Explanation:
A pure substance is a form of matter that has a constant composition and properties that are constant throughout the sample. Mixtures are physical combinations of two or more elements and/or compounds
The image shows the products of a combustion reaction of a hydrocarbon containing only carbon and hydrogen. The large, red spheres represent oxygen atoms, the small, white spheres represent hydrogen atoms, and the grey spheres represent carbon atoms.
In this image, there are 8 molecules composed of a central red atom bound to two different white atoms. There are also 4 molecules composed of a central grey atom bound to two different red atoms.
Determine the empirical formula of the hydrocarbon based on these products.
empirical formula:
Answer:
CH4
Explanation:
Since it's a hydrocarbon, ignore the reds, only looks at the white and grey,
The empirical formula of the hydrocarbon based on these products, CH₄. The molecular name of CH₄ is methane.
What are hydrocarbons ?An organic substance made completely of hydrogen and carbon is called a hydrocarbon. Examples of group 14 hydrides include hydrocarbons. The majority of hydrocarbons are colorless and hydrophobic, and their scents are either insignificant or best characterized by those of gasoline and lighter fluid.
The four different kinds of hydrocarbons are alkanes, alkenes, alkynes, and aromatic hydrocarbons.
The essential energy-storing molecules in all significant forms of fossil fuels and biofuels are hydrocarbons. They serve as the raw material for making many different kinds of polymers.
Thus, The empirical formula of the hydrocarbon based on these products, CH₄.
To learn more about hydrocarbons, follow the link;
https://brainly.com/question/17578846
#SPJ2
See attached. Thank you :)
The first product is a secondary alcohol as shown and the last product is an alkanone.
What is reaction mechanism?The term reaction mechanism has to do with the series of steps by which a chemical reaction occurs. We know that a chemical reaction may not occur in just a single reactive encounter. We could have cases just as have been showed above where the single chemical reaction has to take place through a route that involves several steps along the reaction pathway. This long pathway of the reaction is what we have called the reaction mechanism of the given or particular reaction.
In this case, the first step in the reaction is the addition of water to the alkene and this would led to the formation of an alkanol as you can see from the image attached to the answer here . This is the product that has been labelled (a).
In the second step of the process. The strong oxidizing agents and the secondary alcohol yields the alkenone and that is the final product as shown.
Learn more about reaction mechanism:https://brainly.com/question/26690612
#SPJ1
A polystyrene cup is used to minimise thermal energy loss.
a. Explain why it is important to take steps to minimise thermal energy loss.
b. How else could thermal energy loss be minimised in this experiment?
PLEASE HELP
A polystyrene cup is used to minimise the thermal energy loss because polystyrene cup is acts as a very good insulator.
It is important to use polystyrene cup to minimise thermal energy loss because it prevent the heat energy loss as it has air bubbled trapped inside them. if we hold a hot coffee in a polystyrene cup , the hot coffee does not burn your finger because it is a bad conductor of heat. it is a natural insulator. we can also use this styroform or polystyrene idea to make home warm in cold region , it reduce the transfer of heat ,so that building stays warmer.
We can use plastic foam to reduce heat energy loss . Both polystyrene and plastic foams are the good insulators and bad conductor of heat.
To learn more about polystyrene here
https://brainly.com/question/4300184
#SPJ1
Which is true regarding percentage error?
The percentage error is calculated by multiplying the approximation value and the exact value.
The percentage error is a percentage that details how far an approximation is from the exact value after an experiment.
The percentage error is a set of inferences made by human senses and scientific equipment.
The percentage error is a percentage that states how many mistakes were made during an experiment.
The statement that is true regarding percentage error is as follows: the percentage error is a percentage that details how far an approximation is from the exact value after an experiment (option B).
What is percentage error?Percentage error is the difference between estimated value and the actual value in comparison to the actual value and is expressed as a percentage.
The percentage error in an experiment can be calculated by subtracting the actual value from the estimated value divided by the actual value, then multiplying the result by 100.
Percentage error = (Estimated value - Actual value/ Actual value) × 10
Therefore, the statement that is true regarding percentage error is as follows: the percentage error is a percentage that details how far an approximation is from the exact value after an experiment.
Learn more about percentage error at: https://brainly.com/question/4170313
#SPJ1