Answer:
the net force or resultant force
If new evidence is discovered that a theory does not accommodateoptions:
the theory is disproved and thrown out
the theory then becomes a law
the theory is generally modified in light of this new evidence
the theory can not change so it stays the same
Answer:
The theory is generally modified in light of this new evidence.
Which of the following processes is more easily observable for light with a short wavelength?
help please.
Answer:
Option B
Explanation:
Option B
Answer is PHOTOELECTRIC EFFECT
. A marble sphere with a diameter of 1/4 inch is fully immersed in the oil of density 0.961 g/cm3 . Calculate the buoyant force exerted on the marble sphere by the oil.
Answer:
See below ( was it REALLY 1/4 INCH??)
Explanation:
Calculate the volume of the sphere
v = 4/3 pi r^3
this times the density of the oil will give g displacement
then f = ma
4/3 pi (.25 in * 2.54 cm/inch) ^3 * .961 = 1.0307 gm
1.0307 gm is .0010307 kg
f = ma = .0010307 * 9.8 = .0101 N
Starting from rest, an object accelerates on a straight level surface at the rate of 2 m/s for 10 s. 9. What is the speed of the object at the end of 10 s? (A)5 m/s (B) 10 m/s (C) 20 m/s (D) 30 m/s (E) 40 m/s
Answer:
C
Explanation:
a = v-u / t
a×t = v (u= 0 therefore is ignored)
2m/s² × 10s = v
v= 20m/s
What is the current in a bulb if the resistance of its filament is 2 ohms and it is connected across a 6-volt battery
Answer:
3 amps
Explanation:
V = IR
6 = I * 2
I = 3 amps
in this image of a series circuit, which light bulb will the current reach first
a. bulb a
b. bulb b
c. bulb c
d. a, b, and c simultaneously
Seeds are often found on which part of a gymnosperm?
branch
leaf
cone
stem
2.
What is the coefficient of friction between a block of wood that weighs 12.2
N and requires a force of 2 N to pull along at a constant velocity?
Want
Equation and solve
Given
Answer:
0.163934
Explanation:
Kinetic friction can be calculated by coefficient of kinetic friction * normal force. In this question the Mg is = to normal force (12.2 N). Therefore using sum of forces equations we get 2N = coefficient of kinetic friction * 12.2N. divide 2 by 12.2 to get the coefficient.
If you pull a permanent magnet rapidly away from a tank circuit, what is likely to happen in that circuit?.
Answer:
attract the magnetic ratio engine light of rock level
Marcus plucks at an outstretched coil and observes the following wave motion. what is the motion of the particles in this kind of wave? a hand holds the left end of a set of waves. the wave has longer and shorter spaces between successive waves as it spreads to the right. a label wave motion is above the series of waves and an arrow next to the label points right. the particles will move up and down over large areas. the particles will move up and down over small areas. the particles will move side to side over small areas. the particles will move side to side over large areas.
The motion of the particles in this kind of wave will be option C that is The particles will move side to side over small areas.
What is a wave?A wave can be described as a disturbance that travels through a medium from one location to another location.
When Marcus plucks an outstretched coil, the coli sets into wave like motion that is oscillates to and fro. The particles of the medium do not move along the wave but just vibrate sideways about a fixed position.
The particles would move side to side over very small areas. Such type of wave is known as a mechanical wave. A Sound wave is a mechanical wave.
The particles vibrate in the direction of the motion of the wave. The wave carries forward the energy.
To know more about Waves follow
https://brainly.com/question/6069116
Answer:
C is the correct answer. :)
Explanation:
According to Newton's Law of Gravity, if two objects were to move twice as far apart, the force of gravity between them would be...
The force of gravity between them given the data from the question, would decrease by a factor of 4
Newton's law of gravityF = GM₁M₂ / r²
Where
F is the force G is the gravitational constant M₁ and M₂ are the masses of the objectsr is the distance apart Data obtained from the question Initial distance apart (r₁) = rInitial force (F₁) = FFinal distance apart (r₂) = 2rFinal force (F₂) =? How to determine the final forceF = GM₁M₂ / r²
Cross multiply
Fr² = GM₁M₂
GM₁M₂ = constant
F₁r₁² = F₂r₂²
With the above formula, we can obtain the final force as follow:
F₁r₁² = F₂r₂²
F × r² = F₂ × (2r)²
Fr² = F₂ × 4r²
Divide both side by 4r²
F₂ = Fr² / 4r²
F₂ = F / 4
Thus, we can conclude that the final force will decrease by a factor of 4
Learn more about Newton's Law of gravity:
https://brainly.com/question/3681346
#SPJ1
2 ton car that starts from rest under the action of traction engine for 30 seconds gains speed 52 km / h. the coefficient of friction between the wheels of the car and the road is 0.02. find: the work done by the traction of the engine and the friction beam on the car at this time
Answer:
1 m/s=3.6km/her
56km/hr=?
=56km/hr×1m/s/3.6km/her
velocity is 15.5m/s
Explanation:
w=fs
a=v/t
a=15.5m/s/30s
a=465m/s^2
w=fs
w=0.02×
Can electromagnetic waves travel in a vacuum?
Yes
Or
No
Answer:
Yes
Explanation:
Yes because Electromagnetic waves differ from mechanical waves in that they do not require a medium to propagate. This means that electromagnetic waves can travel not only through air and solid materials, but also through the vacuum of space.
What does sound travel through?
Answer:
Solids liquids and gases
Explanation:
sound will not travel in a vacuum
A light bulb has a resistance of 360 . What is the current in the bulb when it has a potential difference of 120 V across it?
0.33 A
3 A
480 A
43,200 A
Answer:
333 mAmps .33 A
Explanation:
v = ir
v/r = i
120 v / 360 ohm = .3333 A
Answer:
A). 0.33A
Explanation:
explain how to identify the points under compression and tension
Answer:
Pls make me brainliest
Explanation:
the compression force is the force generated from compressing an object or substance. When shearing forces are aligned into each other, they are called compression forces.
The compression force is used to power everything from compression brakes to hand tools. The compressive strength of materials and structures is an important engineering consideration.
The compression force can be visualized by placing an object on a spring. When the spring is compressed and then released, the object is ejected into the air.
This is a result of the compression force that is generated from compressing the spring.
This system has a constant velocity, and there is an equilibrium because the tension in the cable, which is pulling up the object, is equal to the weight force, i.e., mg. Where M is a mass, and g is the acceleration caused by gravity, which is pulling down the object.
The Formula of Tension.
T = Mg
Tension word becomes from a Latin word meaning “to stretch.” Testing part of the force, Like one type of pull force. All physical objects that are in contact may exert forces on each other.
This contact forces different names based on these types of objects in contact. Where one of the objects exerting the force happens to be a rope, string, chain, or cable we call the force tensions
The spring of a dart gun exerts a force on a 0.02 kg dart as it is launched from the gun with 4.00 J of KE. At what velocity does the dart come out of the gun?
Let's see
KE=1/2mv²m is mass and v is velocity
2KE=mv²4(2)=0.02v²8=2v²/1002v²=800v²=400v=20m/sAn electric appliance is connected by wires to a 240-volt source of voltage. If the combined resistance of the appliance and wires is 12 ohms, how much current is flowing through the circuit?
Apply ohms law
V=IR240=12II=240/12I=20AAnswer :-
Current is 20 Ampere .Explanation :-
As per the provided information in the given question, we have been given that the Potential Difference is 240 Volt's . Resistance is given as 12 Ohm's . And, we have been asked to calculate the Current .
For calculating the Current , we will use the Formula :-
[tex] \bigstar \: \: \: \boxed{ \sf{ \: Current \: = \: \dfrac{Voltage}{Resistance} \: }} \\ [/tex]
Therefore , by Substituting the given values in the above Formula :-
[tex] \Longrightarrow \: \: \: \sf { Current \: = \: \dfrac{Voltage}{Resistance} } \\ [/tex]
[tex] \Longrightarrow \: \: \: \sf { Current \: = \: \dfrac{ \: 240 \: }{12} } \\ [/tex]
[tex] \Longrightarrow \: \: \textbf {\textsf { Current \: = \: 20 }} \\ [/tex]
Hence :-
Current = 20 Ampere .[tex] \underline {\rule {180pt}{4pt}} [/tex]
Additional Information :-
[tex] \Longrightarrow \: \: \: \sf {Voltage \: = \: Current \: \times \: Resistance} [/tex]
[tex] \Longrightarrow \: \: \: \sf {Current \: = \: \dfrac {Voltage}{Resistance} } [/tex]
[tex] \Longrightarrow \: \: \: \sf {Resistance \: = \: \dfrac {Voltage}{Current} } [/tex]
Question 20 I need help ASAP!!
Answer:
1.) Gas = Are the particles moving quickly in a radom pattern?
2.) Plasma = Are the particles electrically charged?
3.) Solid = Are the particles vibrating in a fixed position?
4.) Liquid = Are the particles sliding past each other?
Hope this helps!
Write your own real-world scenario where the Pythagorean Theorem can be applied to find a missing piece. You may choose to write a problem that is two- or three-dimensional in nature. Be sure that you will be able to draw a diagram of your scenario.
Write out your problem and submit it for Part 1. Be sure to end your scenario with a question
Answer:
hey
Explanation:
Displacement covered by the man calculated by using Pythagoras theorem is 10 km.
What is Pythagoras Theorem ?Pythagoras theorem states that, for a right-angled triangle, the square of the hypotenuse side is equal to the sum of squares of the altitude and base sides.
Here,
The Pythagoras Theorem can be written as,
c² = b² + a²
where c is the hypotenuse, b is the base and a is the altitude of the triangle.
An example of application of the Pythagoras theorem is,
A man started walking from his home and covered a distance of 8 km towards the east and then turned right and walked a distance of 6 km towards the south, what is his displacement now from his starting point ?
A line drawn from his current position and his initial point represents the displacement covered by the man.
Let the starting point be A, then he walks to the point B and then he turns right and walks upto the point C.
Drawing a figure including all the data, we get a right angled triangle, ABC. So,
The base of the triangle, BC = 6 km
Altitude of the triangle, AB = 8 km
The displacement of the man = hypotenuse of the triangle
d = AC
According to Pythagoras Theorem,
AC² = BC² + AB²
AC² = 6² + 8² = 100
AC = √100
Therefore, displacement, d = AC = 10 km.
Hence,
Displacement covered by the man calculated by using Pythagoras theorem is 10 km.
To learn more about Pythagoras theorem, click:
https://brainly.com/question/343682
#SPJ7
Attaching the image file here.
How does water form in the clouds? Explain how
When air rises in the atmosphere it gets cooler and is under less pressure. When air cools, it's not able to hold all of the water vapor it once was. Air also can't hold as much water when air pressure drops. The vapor becomes small water droplets or ice crystals and a cloud is formed.
I hope this helps you..
what would happen in a capacitor if the dielectric was not made out of an insulator
[tex]
\mathbb \blue{Answer }[/tex]
[tex]Introducing \: \: a \: dielectric \: \: into \: \\ a \: \: capacitor \: \: decreases \: \: \\ the \: \: electric \: \: field, \: \: \\ which \: \: decreases \: \: the \: \: \\ voltage, \: \: \ which \: \: increases \: \: the \: \: \\ capacitance. \: \: A \: capacitor \: \: with \: a \: \\ dielectric \: \: stores \: the \: \\ same \: \: \ charge \: \: as \: one \: \\ without \: \: a \: dielectric, \: but \: at \: \\ a \: \: lower \: \: voltage. \: \: \\ Therefore \: \: a \: \: capacitor \: \: with \: \: a \: \\ dielectric \: \: in \: \: it \: \\ is \: \: more \: \: effective \: [/tex]
[tex]\mathbb \blue{ I \: hope \: it's \: helpful \: \: for \: you }[/tex]
,,,,,,,,,,,,,,,,,,,,,,,,,
You throw a 0.5 kg ball with a force of 10 N. What is the acceleration of the ball?
Answer:
20m/s^2
Explanation:
F=ma, therefore 10N = 0.5kg * a. Solve for a.
The half life of uranium-235 is 4. 5 billion years. If 0. 5 half-lives have elapsed, how many years have gone by?
a. 9 billion
b. 2. 25 billion
c. 4. 50 billion
d. 4. 0 billion
Answer:
2.25 billion years
Explanation:
i am smort
In a circuit, when the electrical resistance increases, the current _______ because it is _______ for the electrons to flow
In a circuit, when the electrical resistance increases, the current _______ because it is _______ for the electrons to flow.
[tex] \\ [/tex]
Answer:In a circuit, when the electrical resistance increases, the current decreases because it is blocking for the electrons to flow.
#LearnWithBrainly
A 160 kg cart has a momentum of 870 kg m/s. What is the velocity of the cart?
Answer: 5.44 m/s
Explanation:
Given:
Mass of cart: 160 kg
Momentum of cart: 870 kg•m/s
[tex]$$Momentum $|\rho|=m \times v$$$\begin{aligned}&870 \ kg\cdot m/s=160 \mathrm{~kg} \times v \\&v=5.44 \mathrm{~m} / \mathrm{s}\end{aligned}$$[/tex]
Answer:
The momentum is defined as :
P=mv
Where m is the mass and v is the velocity. In this case we know the mass is 160 kg and the momentum is 870 kg plugging in this equation above and solving for the velocity we have
870=160V
V=870÷160
V=5.44
Therefore, the velocity of the cart is 5.44 m/s.
Light of wavelength 630 nm (630 x 10-9 m) is used to produce a double slit diffraction pattern where the third order image is 0.10 m from the central image using a diffraction grating constant of 4.9 x 10-5 m. How far is the screen from the slits? SHOW ALL WORK
For Light of wavelength 630 nm (630 x 10-9 m) is used to produce a double slit diffraction pattern where the third order image is 0.10 m the distance of the screen from the slits is mathematically given as
D = 26m
How far is the screen from the slits?
Generally, the equation for the small-angle approximation is mathematically given as
x = n(Landa)D/d
therefore,
D = 0.10x4.9 x 10-5/(3x630 x 10-9)
D = 26m
In conclusion, the distance of the screen from the slits is
D = 26m
Read more about Lens
https://brainly.com/question/13644773
Continental air masses usually contain less moisture because they...
...originate over water.
...originate over ice.
...move from water onto land.
...originate over land.
brainliest for correct answer
Answer:
I believe its either the 3rd or 4th one
Explanation:
I'm not sure if these are correct sorry if this is a false or unhelpful anwser
Mike is pushing a car up a ramp. What could Mike do to reduce the effort force he needs to use to push the car?
Answer:
He could use a really big pulley system or get in it and drive or call a tow truck.
The potential difference across a conducior is 6.0V. What is the energy dissipaled when a current of 5.0 A flows for 1 minute?
Answer:
1/2 watt hr
Explanation:
watts = V I = 6 * 5 = 30 watts for 1/60 hr
30 watts * 1/60 hr = 1/2 watt hr