The coding strand in DNA is the strand that contains the genetic code that is used to build a polypeptide. The n-terminal end of the polypeptide built from this DNA would be located at the 5' end of the coding strand.
What is a coding strand?A coding strand is a strand of DNA that contains the genetic code for building a polypeptide. During the process of transcription, RNA polymerase reads the sequence of the coding strand and creates a complementary RNA sequence called the messenger RNA (mRNA).
The mRNA then carries the genetic code out of the nucleus and into the cytoplasm, where it is used to build a polypeptide.
The other strand of DNA, which is not being transcribed, is called the template strand.
This strand is complementary to the coding strand and is read by RNA polymerase to create the mRNA sequence. However, the mRNA sequence is not identical to the template strand sequence because it is created using RNA nucleotides instead of DNA nucleotides.
What is the n-terminal end of a polypeptide?The n-terminal end of a polypeptide is the end of the protein chain that contains the amino group (-NH2). This end is also called the amino-terminus or N-terminus.
The other end of the chain is called the c-terminal end and contains the carboxyl group (-COOH). This end is also called the carboxy-terminus or C-terminus.
The sequence of amino acids in a polypeptide determines its shape and function, which are critical for its biological activity.
To know more about DNA refer to-
brainly.com/question/264225#
#SPJ11
what volume of 0.166 mna3po4 solution is necessary to completely react with 95.4 ml of 0.107 mcucl2 ?
33 mL volume of 0.166 M Na₃PO₄ solution is necessary to completely react with 95.4 mL of 0.107 M CuCl₂.
To determine the volume of 0.166 M Na₃PO₄ solution needed to react with 95.4 mL of 0.107 M CuCl₂, we can use the balanced chemical equation for the reaction between CuCl₂ and Na₃PO₄
3CuCl₂ + 2Na₃PO₄ → Cu₃(PO₄)₂ + 6NaCl
From the balanced equation, we can see that 2 moles of Na₃PO₄ are required to react with 3 moles of CuCl₂. Therefore, we can use the following formula to calculate the volume of Na₃PO₄ solution needed
V(Na₃PO₄) = (n(CuCl₂) × V(CuCl₂) × 2) / (3 × M(Na₃PO₄))
where; V(Na₃PO₄) is the volume of 0.166 M Na₃PO₄ solution needed (in mL)
n(CuCl₂) is the number of moles of CuCl₂ present (in mol)
V(CuCl₂) is the volume of 0.107 M CuCl₂ solution (in mL)
M(Na₃PO₄) is the molarity of the Na₃PO₄ solution (in mol/L)
Put the given values into formula, we have;
V(Na₃PO₄) = (0.107 mol/L × 0.0954 L × 2) / (3 × 0.166 mol/L)
V(Na₃PO₄) = 0.033 L or 33 mL (rounded to 2 significant figures)
Therefore, 33 mL volume will be needed.
To know more about volume here
https://brainly.com/question/1578538
#SPJ4
Endothermic and Exothermic Activity
For this assignment, you will create your own potential energy diagrams for each of the three chemical reactions. Then you will analyze the data and your diagrams for each reaction.
Generic Reactions Reactants Products Transition State
Synthesis
A + B → AB A + B −15 kJ AB 20 kJ 30 kJ
Single Replacement
C + AB → CB + A
C + AB 65 kJ CB + A 30 kJ 85 kJ
Double Replacement
AB + CD → AD + BC AB + CD 10 kJ AD + BC 60 kJ 75 kJ
To assist you, use the enthalpy values in the data chart for each generic reaction provided. Be sure to following the summary of steps below.
• Illustrate the x- and y-axes to show the reaction pathway and potential energy, in kilojoules. Ensure your energy intervals are appropriate for the data.
• Plot the enthalpy values of the reactants, products, and transition state using three horizontal dotted lines across the graph for each.
• Draw the energy curve from the reactants line to the transition state and curve the line back down to the energy of the products. Label the reactants, products, and transition state.
• Illustrate double-headed arrows to represent both the total change in enthalpy (ΔH) and the activation energy (Ea).
• Calculate the total change in enthalpy and the activation energy using the energy values provided for each reaction. Record those values below the graph.
• Make sure correct units are included.
Conclusion Statement
Write a two to four sentence conclusion statement explaining how the potential energy diagram is used to identify if the reaction is endothermic or exothermic, if heat was released or absorbed, and why the sign of enthalpy change was positive of negative. There should be a conclusion statement for each graph.
need asap
The potential energy diagram for the single replacement reaction shows that the reactants have a higher energy than the transition state, and the products have a lower energy than the transition state.
Given the three chemical reactions as:
1. generic reactions : synthesis A+B-->AB
reactants: A+B -15kJ
products: AB 20kJ
Activation Energy: 30kJ
2. generic reactions: single replacement C+AB-->CB+A
reactants: C+AB 65kJ
products: CB+A 30kJ
activation energy: 85kJ
3. generic reactions: double replacement AB+CD =AD+BC
reactants : AB+CD 10kJ
products: AD+BC 60kJ
activation energy: 75kJ
The diagrams given shows the basic potential energy diagrams for an endothermic (A) and an exothermic (B) reaction along with the enthalpy change (ΔH) which is positive for an endothermic reaction and negative for an exothermic reaction.
The potential energy diagram for the synthesis reaction shows that the reactants have a lower energy than the transition state, and the products have a higher energy than the transition state. This indicates that the reaction is endothermic, as heat is being absorbed, and the sign of the enthalpy change is positive. The activation energy is the difference between the reactants and the transition state, and the total change in enthalpy is the difference between the transition state and the products.
To learn more about enthalpy click here https://brainly.com/question/3298339
#SPJ1
a 25.00 ml sample of 0.200 m hcl is titrated with 0.2 m naoh. what is the ph after the addition of 12.50 ml of naoh?
The given concentration of HCl is 0.200 M and the volume of the solution is 25.00 mL.Moles of HCl = concentration × volume Moles of HCl = 0.200 M × 25.00 mL = 0.005 moles Since NaOH is added to this acid, a neutralization reaction occurs: NaOH + HCl → NaCl + H2OThe balanced chemical equation above indicates that 1 mole of HCl reacts with 1 mole of NaOH. This means that 0.005 moles of NaOH will be required to neutralize 0.005 moles of HCl.
Volume of NaOH used = 12.50 mL = 0.0125 LV = 0.2 MV = 0.0125 M Therefore, the number of moles of NaOH used in the reaction is:0.2 M × 0.0125 L = 0.0025 moles of NaOHHCl and NaOH neutralize each other, leaving NaCl and water. After the neutralization reaction, the remaining concentration of NaOH is 0.2 M - 0.1 M = 0.1 M.
The final volume of the solution is 25.00 mL + 12.50 mL = 37.50 mL. The concentration of the resulting solution is: 0.0025 / 0.0375 = 0.067 MTo calculate the pH, we need to use the equation: pH = -log[H3O+]The concentration of the acid solution after the addition of NaOH is negligible. Hence, the concentration of H3O+ is very small. pH = -log[H3O+]pH = -log(1.49 × 10^-10)pH = 9.83Therefore, the pH after the addition of 12.50 mL of NaOH is 9.83.
Therefore the answer is: pH of the solution after the addition of 12.50 mL of NaOH is 9.83.
For more questions on: volume
https://brainly.com/question/29493123
#SPJ11
Imagine you have three tuning forks of frequencies 250, 500 and 1000 Hz. Which one would:
A) sound the lowest
B) have the highest pitch
If we have three tuning forks of frequencies 250, 500 and 1000 Hz then the tuning fork of 250 Hz would sound the lowest and the tuning fork of 1000 Hz would have the highest pitch.
A.) The tuning fork of 250 Hz would sound the lowest, as it has the lowest frequency among the three. Frequency measures the number of oscillations per second of a wave so the 250 Hz wave will have fewer oscillations per second than the 500 Hz and 1000 Hz waves, resulting in a lower pitch. A lower frequency means that the sound waves are closer together, producing a lower, deeper sound.
B) The tuning fork of 1000 Hz would have the highest pitch, as it has the highest frequency. The 1000 Hz wave will have more oscillations per second than the 250 Hz and 500 Hz waves, resulting in a higher pitch. A higher frequency means that the sound waves are farther apart, producing a higher, more piercing sound.
To learn more about frequency click here brainly.com/question/14320803
#SPJ1
The system: N2O (g) + NO2(g)
⇔
3 NO (g) is at equilibrium. You add some NO2 and allow the system to adjust to the change. For each substance, indicate whether the amount of that substance present has increased, decreased or not changed when compared to the amount present in the original equilibrium.
When [tex]NO2[/tex] is added to the system, according to Le Chatelier's principle, the equilibrium will shift to counteract the increase in[tex]NO2[/tex]. The reaction will proceed in the forward direction to consume the excess [tex]NO2[/tex].
As a result, the amount of [tex]N2O[/tex] will decrease, the amount of [tex]NO2[/tex] will decrease, and the amount of[tex]NO[/tex]will increase. The equilibrium will shift to the right to maintain a constant value of Kc.
Therefore, the amount of [tex]N2O[/tex] and [tex]NO2[/tex]will decrease, and the amount of [tex]NO[/tex] will increase. This is because the forward reaction [tex](N2O + NO2 = 3NO)[/tex]will consume the added[tex]NO2[/tex], which will cause the amount of[tex]N2O[/tex]to decrease. In response, the reverse reaction [tex](3NO → N2O + NO2)[/tex]will proceed, causing the amount of [tex]NO[/tex] to increase. The equilibrium will shift in the forward direction to restore the balance between the reactants and products.
Learn more about equilibrium here
https://brainly.com/question/30807709
#SPJ1
a chemist wants to make a solution of 3.4 m hci. he can find 2 solutions of hci on the shelf. one has a concentration of 6.0 m, while the other has a concentration of 2.0 m. which solution can the chemist use to make the desired acid?
The chemist can use the 6.0 M HCl solution to make the 3.4 M solution by diluting 566.7 mL of the 6.0 M solution to a final volume of 1 L.
To make a 3.4 M solution of HCl, the chemist needs to dilute a concentrated HCl solution to a specific volume. Let's use the formula;
C₁V₁ = C₂V₂
Where C₁ is the concentration of the concentrated HCl solution, V₁ is the volume of the concentrated HCl solution needed, C₂ is the desired concentration of the final solution (3.4 M), and V₂ is the final volume of the solution.
We can rearrange this formula to solve for V₁
V₁ = (C₂V₂) / C₁
Substituting the values, we get;
V₁ = (3.4 M x 1 L) / 6.0 M = 0.5667 L = 566.7 mL
Or
V₁ = (3.4 M x 1 L) / 2.0 M
= 1.7 L
The chemist cannot use the 2.0 M HCl solution to make the desired 3.4 M solution, as it is too dilute to achieve the desired concentration.
To know more about concentration here
https://brainly.com/question/10725862
#SPJ4
A chemical reaction occurred when .500g of Calcium hydroxide falls into a 100ml of
8.5M hydroiodic acid.Is this enough calcium hydroxide to completely neutralize the all of the acid?
-How much salt forms in this reaction?
First, we need to determine the number of moles of hydroiodic acid in 100mL of 8.5M solution. Therefore, 1.98 g of calcium iodide forms in the reaction.
8.5 moles/L x 0.100 L = 0.85 moles of hydroiodic acid
Next, we need to determine the number of moles of calcium hydroxide used in the reaction.
0.500 g Ca(OH)2 x (1 mol Ca(OH)2/74.09 g) = 0.00674 moles Ca(OH)2
Since the stoichiometry of the reaction is 1:2 between Ca(OH)2 and HI, we need twice as many moles of hydroiodic acid to completely react with all the Ca(OH)2.
0.00674 moles Ca(OH)2 x 2 = 0.0135 moles HI needed
Since we have 0.85 moles of HI, which is more than enough to react with 0.0135 moles of Ca(OH)2, the reaction is complete.
To determine how much salt (calcium iodide) forms, we need to use the stoichiometry of the reaction, which is:
Ca(OH)2 + 2HI ⇒ CaI2 + 2H2O
Since two moles of hydroiodic acid react with one mole of calcium hydroxide to form one mole of calcium iodide, the amount of salt formed is:
0.00674 moles Ca(OH)2 x (1 mol CaI2/1 mol Ca(OH)2) = 0.00674 moles CaI2
Finally, we can calculate the mass of calcium iodide formed using its molar mass:
0.00674 moles CaI2 x 293.88 g/mol = 1.98 g CaI2
To know more about calcium iodide, visit:
https://brainly.com/question/29694775
#SPJ1
the solubility product of ag2cro4 is 9.0 x 10^-12. explain the difference between the equilibrium postion attained when silver chromate is added to pure water and when it is added to 0.100 m agno3
The equilibrium position attained when Ag2CrO4 is added to a solution of 0.100 M AgNO3 will be shifted towards the dissolution of the solid compound.
How can we determine equilibrium position?
The solubility product constant (Ksp) of Ag2CrO4 is a measure of the tendency of the solid compound to dissolve into its constituent ions.
It can be expressed as the product of the concentrations of the ions involved in the equilibrium of the dissolution of the solid compound.
When Ag2CrO4 is added to pure water, it will dissolve slightly to form some Ag+ and CrO42- ions, and the system will reach an equilibrium state.
The equilibrium position will be such that the product of the concentrations of these ions is equal to the Ksp of the compound.
At this point, the rate of dissolution of the solid compound will be equal to the rate of precipitation of the solid compound.
On the other hand, when Ag2CrO4 is added to a solution of 0.100 M AgNO3, the concentration of Ag+ ions in the solution is much higher than in pure water.
This will shift the equilibrium position towards the side of the reaction that consumes the excess Ag+ ions.
In other words, more Ag2CrO4 will dissolve to form Ag+ and CrO42- ions, in order to consume the excess Ag+ ions in solution.
This will result in a lower concentration of Ag2CrO4 in the solution compared to when it is added to pure water.
Therefore, the equilibrium position attained when Ag2CrO4 is added to a solution of 0.100 M AgNO3 will be shifted towards the dissolution of the solid compound.
Learn more about equilibrium position
brainly.com/question/29409724
#SPJ11
How are these words related?
dozen
gross
ream
decade
A)Units of time
B)Units of ordering
C) Involved counting things
Please answer ASAP
c. involved counting things.
A 2.3 g sample of gold (specific heat capacity = 0.130 J/g °C) is heated using 92.3 J of energy. If the original temperature of the gold is 25.0°C, what is its final temperature?
Answer:
325.38°C
Explanation:
We can use the formula Q = mcΔT to solve this problem, where Q is the amount of heat transferred, m is the mass of the substance, c is its specific heat capacity, and ΔT is the change in temperature.
First, we need to calculate the amount of heat transferred:
Q = 92.3 J
Next, we need to calculate the change in temperature. We can rearrange the formula to solve for ΔT:
ΔT = Q / (mc)
where ΔT is the change in temperature, Q is the amount of heat transferred, m is the mass of the substance, and c is its specific heat capacity.
Plugging in the values we have:
ΔT = 92.3 J / (2.3 g x 0.130 J/g °C)
ΔT = 300.38 °C
This means that the temperature of the gold has increased by 300.38 °C. Since the initial temperature was 25.0°C, the final temperature will be:
Final temperature = Initial temperature + ΔT
Final temperature = 25.0°C + 300.38 °C
Final temperature = 325.38 °C
Therefore, the final temperature of the gold is 325.38°C.
If 4.0 moles of CO2 and 2.5 moles of O2 are in a 25.5 Liter tank together,
how many more moles must be added to achieve a volume of 32.1 Liters?
Fluorine gas and water vapor react to form hydrogen fluoride gas and oxygen. What volume of oxygen would be produced by this reaction if 8.49cm^3 of fluorine were consumed?
Also, be sure your answer has a unit symbol, and is rounded to the correct number of significant digits.
The volume of oxygen gas produced is 7.72 x[tex]10^{-4}[/tex] L (or 0.772 mL) at STP.
What is Pressure?
Pressure is defined as the force applied per unit area. It is a scalar quantity, meaning that it has only magnitude and no direction. Pressure can be expressed in a variety of units, such as pascals (Pa), pounds per square inch (psi), atmospheres (atm), or torr.
The balanced chemical equation for the reaction is:
F2(g) + 2H2O(g) -> 2HF(g) + O2(g)
From the equation, we can see that 1 mole of fluorine gas (F2) reacts to form 1 mole of oxygen gas (O2). We can use the ideal gas law to calculate the volume of oxygen gas produced:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
Assuming standard temperature and pressure (STP) of 0°C and 1 atm, we can simplify the equation to:
V = nRT/P
where R = 0.0821 L atm/(mol K) is the gas constant.
To find the number of moles of oxygen produced, we need to first find the number of moles of fluorine consumed. We can use the ideal gas law again, assuming that the volume of the fluorine gas is measured under STP conditions:
PV = nRT
n = PV/RT = (1 atm)(8.49 [tex]CM^{3}[/tex])/(0.0821 L atm/(mol K) * 273 K) = 3.74 x [tex]10^{-5}[/tex]mol
So, we know that 3.74 x 10^-5 moles of F2 react to form the same number of moles of O2. We can use this to calculate the volume of O2 produced:
V = nRT/P = (3.74 x [tex]10^{-5}[/tex] mol)(0.0821 L atm/(mol K))(273 K)/(1 atm) = 7.72 x [tex]10^{-4}[/tex]L
Learn more about Pressure from the given link
https://brainly.com/question/28012687
#SPJ1
in class, we examined the change in the uv-vis spectrum for pt3-tpd as a function of temperature as shown by the repeat unit structure and spectra below. explain: what is causing the absorption at ca. 500 nm. what is causing the absorption to evolve at 600 to 625 nm. why the spectra cross at ca. 530 nm
At low temperatures, the HOMO→LUMO transition has a higher absorption, while the interligand transition has a lower absorption. However, as the temperature increases, the interligand transition becomes more significant, and the absorption peak shifts to longer wavelengths. When the HOMO→LUMO and interligand transitions are about the same, they cross, which causes the spectra to cross at around 530 nm.
As part of your class work, you examined the change in the UV-Vis spectrum for Pt3-TPD. A repeat unit structure and spectrum were used to represent the changes that occurred as the temperature varied. Based on this information, you need to explain what is causing the absorption at around 500 nm, what causes the absorption to evolve between 600-625 nm, and why the spectra cross at about 530 nm.The absorption at around 500 nm is caused by the HOMO→LUMO transitions of the Pt3-TPD oligomers. HOMO and LUMO are molecular orbitals that are related to the highest occupied molecular orbital and the lowest unoccupied molecular orbital, respectively. When an electron in the highest occupied molecular orbital (HOMO) is excited to the lowest unoccupied molecular orbital (LUMO) by the absorption of light at around 500 nm, this transition leads to absorption at this wavelength. The LUMO state of Pt3-TPD is primarily a delocalized π-π* state that is influenced by the phenyl rings that are substituted onto the TPD ligand. The absorption at this wavelength is also influenced by the arrangement of the chromophores in the Pt3-TPD oligomers.The absorption that occurs between 600-625 nm is due to the interligand transitions in Pt3-TPD oligomers. The Pt3-TPD oligomers contain pi-stacked chromophores that are closely linked together. When an electron in one chromophore is excited by the absorption of light, it causes a change in the energy level of the other chromophores, resulting in absorption in the 600-625 nm range. The absorption peak in this range becomes sharper and more well-defined as the temperature rises because it corresponds to intermolecular pi-stacking.The spectra cross at around 530 nm due to the overlap of the HOMO→LUMO and interligand transitions.
to learn more about: temperatures
https://brainly.com/question/4735135
#SPJ11
) H₂C=CH₂ H₂ Ni
What is the reaction scheme
Based on the presence of hydrogen gas (H₂) and nickel (Ni), it is possible that this is a hydrogenation reaction in which the double bond in H₂C=CH₂ is converted to a single bond.
What is a hydrogenation reaction?Hydrogenation is a chemical reaction in which hydrogen gas (H₂) is added to a molecule, typically an unsaturated organic compound, to form a saturated molecule. The reaction is usually catalyzed by a metal catalyst, such as nickel or palladium, and typically occurs at high pressure and temperature.
The addition of hydrogen atoms to an unsaturated molecule, such as an alkene or alkyne, can convert it to a saturated molecule, such as an alkane. This process is widely used in the food industry to convert unsaturated fats and oils into saturated fats and oils, which have a longer shelf life and are more stable at high temperatures.
The balanced equation for this reaction is:
H₂C=CH₂ + H₂ → H₃C-CH₃
This reaction is an example of an addition reaction, where atoms or molecules are added to the reactant molecule to form a product.
Learn more about hydrogenation here:
https://brainly.com/question/14236890
#SPJ1
C + 2ZnO → 2Zn + CO2 How many moles of CO2 will be produced if 0.38 mole of ZnO is completely reacted?
If 0.38 mole of ZnO is completely reacted, 0.19 mole of CO2 will be produced.
From the balanced chemical equation:
1 mol of C + 2 mol of ZnO → 2 mol of Zn + 1 mol of CO2
This means that for every 2 moles of ZnO reacted, 1 mole of CO2 is produced. Therefore, we can use the following proportion:
2 mol ZnO : 1 mol CO2
x mol ZnO : y mol CO2
where x is the amount of ZnO we have (0.38 mol) and y is the amount of CO2 produced that we want to find.
Solving for y, we have:
2 mol ZnO : 1 mol CO2
0.38 mol ZnO : y mol CO2
y = (0.38 mol ZnO) x (1 mol CO2 / 2 mol ZnO) = 0.19 mol CO2.
Learn more about chemical equation here:
https://brainly.com/question/28294176
#SPJ1
if the concentration of 1-iodopropane doubles and the concentration of sodium hydroxide quadruples in this sn2 reaction, how much faster is the reaction rate? ch7 d2 q1.pdf
The concentration of 1-iodopropane doubles and the concentration of sodium hydroxide quadruples, the reaction rate of this SN2 reaction is 8 times faster.
To determine how much faster the reaction rate is when the concentration of 1-iodopropane doubles and the concentration of sodium hydroxide quadruples in this SN2 reaction, follow these steps:
1. Recall the rate law for an SN2 reaction:
rate = [tex]k[A][B][/tex], where k is the rate constant, and [A] and [B] represent the concentrations of the two reactants.
2. Let the initial concentrations of 1-iodopropane and sodium hydroxide be [A] and [B], respectively. Then, the initial reaction rate is:
Initial rate = [tex]k[A][B][/tex].
3. Now, the concentration of 1-iodopropane doubles (2[A]) and the concentration of sodium hydroxide quadruples (4[B]).
4. Calculate the new reaction rate with these adjusted concentrations:
New rate = [tex]k(2[A])(4[B]) = 8k[A][B][/tex].
5. To find how much faster the reaction rate is, divide the new rate by the initial rate:
(new rate / initial rate) = [tex]\frac{(8k[A][B])}{(k[A][B])}[/tex].
6. Simplify the expression:
[tex]\frac{(8k[A][B])}{(k[A][B])}=8[/tex]
So, when the concentration of 1-iodopropane doubles and the concentration of sodium hydroxide quadruples, the reaction rate of this SN2 reaction is 8 times faster.
Learn more about reaction rate here:
brainly.com/question/30546888
#SPJ11
true or false: in terms of the percentage of alcohol content by volume, one ounce of whiskey has more alcohol than one ounce of wine.
More wine can be consumed because it has less alcohol than whisky. Wine normally has an alcohol content between 12% and 14%, however, whisky can have anywhere between 40% and 50%. The given statement is true.
Alcohol by volume, also known as ABV, is the proportion of ethanol in a particular volume of liquid. The international unit of measurement for alcohol concentration is the ABV. Unfortified wine has an average alcohol by volume (ABV) of 11.6%, with a range of roughly 5.5% to 16%.
Whisky undergoes fermentation in charred white oak wood to produce its distinct flavor. Whisky ceases aging once it is removed from the casks and bottled. About 40% of good whisky is alcohol.
To know more about alcohol, visit;
https://brainly.com/question/31868718
#SPJ12
a storefront window is broken and a robbery committed. a suspect is later found running from the scene. examination of his shoes reveals glass particles embedded in a heel. describe the proper collection and preservation of glass evidence for laboratory examination.
The proper collection and preservation of glass evidence for laboratory examination is crucial to make sure that no contamination or damage occurs to the evidence while it is being collected or transported.
Collecting the glass evidence: Carefully pick up the glass shards one at a time, using forceps or gloved hands, and place them into clean, sterile containers, such as paper bags or envelopes. Carefully label the container and include details such as the location and date of collection, the name of the person collecting it, and any other pertinent information.
Preservation of the glass evidence: After collection, the evidence must be protected from damage, contamination, or any other interference. For glass evidence, the following steps should be followed:Each container should be sealed with evidence tape and stored in a clean, dry, and temperature-controlled environment until it can be transported to the laboratory.
If the glass evidence is suspected of containing DNA or other biological material, it should be kept refrigerated. Any notes, photographs, sketches, or other documentation should be stored with the evidence.
Chain of custody: It is important to maintain a strict chain of custody for all evidence, including glass evidence. This means that every person who handles the evidence must be recorded, and there must be a clear record of its location at all times. This is important to ensure that the evidence is not tampered with, lost, or damaged in any way.
This will allow the evidence to be used in court, and ensure that the suspect is properly prosecuted for the crime committed.
For more such questions on Glass evidence preservation
https://brainly.com/question/17591949
#SPJ11
What does it do in reaching the transition state (which marks the activation energy necessary to promote the reaction?
The transition state in a chemical process is where the energy level is at its highest. The activation energy is the name given to this force. When two or more molecules are combined, collisions will occur.
They will react and produce new molecules if they strike with sufficient energy to pass through the transition state. The kinetics of a reaction are determined by the activation energy, the greater the energy hill, the slower the process. Energy is needed to form bonds, and energy is released when bonds are broken. In one reaction energy profile, the transition state is at its greatest point. Energy increases before the transition stage, which suggests the transition state absorbs energy.
Learn more about transition transition state here:
https://brainly.com/question/28266605
#SPJ4
what is an intermediate in chemistry a point on the reaction pathway that has a discrete minima.
An intermediate in chemistry is a substance that is generated in the middle of a chemical reaction and consumed after that point in the reaction pathway.
It can also be a point on the reaction pathway that has a discrete minimum value or point. An intermediate is generated during the rate-determining phase of a reaction, which is the slowest step in a reaction mechanism.
As a result, intermediates have a short lifespan since they are quickly converted to products.
The existence of intermediates is often demonstrated by kinetic studies, where a chemical reaction is observed over time. They are critical in organic chemistry because they can influence reaction rates and mechanisms.
Intermediates are usually unstable and reactive since they contain a high level of energy, making them susceptible to additional reactions leading to the products that are formed at the end of the reaction.
To know more about reaction pathway refer to-
brainly.com/question/16047003#
#SPJ11
what is the relationship between the average speed of a glider and the force exerted by a magnet?
The average speed of a glider and the force a magnet produces are not directly proportional. A glider's speed is influenced by a number of variables, such as its design and the means of propulsion.
How do acceleration and the net force on a glider relate to one another?According to Newton's second law, a force is equal to an object's mass times its acceleration. The acceleration of the glider was decreased by altering its mass. The acceleration increased as the force applied to the glider grew, proving Newton's second law.
What is the glider's overall net force?The object is not under any net forces. The forces balance out if the object is moving at a steady speed because it isn't accelerating. Only if a net force other than zero applies on the glider will it experience a change in speed.
To know more about acceleration visit:-
brainly.com/question/20513633
#SPJ1
a common temperature-sensing component that reacts to temperature change by changing shape to actuate a reed switch or mercury switch is a
thermostat. A thermostat is a device that automatically maintains a desired temperature within a system by controlling the heating or cooling equipment.
It typically consists of a temperature sensor that measures the temperature of the system, a control unit that compares the measured temperature with the desired temperature and determines whether heating or cooling is needed, and a switching mechanism that activates the heating or cooling equipment. The most common types of thermostats are mechanical, digital, and programmable. Mechanical thermostats use a bimetallic strip that expands or contracts with temperature changes to activate a switch, while digital and programmable thermostats use electronic sensors and microprocessors to control the temperature more accurately and allow for customized scheduling.
Find out more about temperature
brainly.com/question/12287743
#SPJ4
a voltaic cell is an electrochemical cell in which the redox reaction occurs non-spontaneously when an external power source is applied group of answer choices true false
The given statement a voltaic cell is an electrochemical cell in which the redox reaction occurs non-spontaneously when an external power source is applied is false because an electrolytic cell requires an external power source to drive a non-spontaneous redox reaction.
A Voltaic cell, also known as a Galvanic cell, is an electrochemical cell in which the redox reaction occurs spontaneously, without the need for an external power source. The cell converts chemical energy into electrical energy as the reaction progresses. In contrast, an electrolytic cell requires an external power source to drive a non-spontaneous redox reaction. Hence the statement is false.
To know more about voltaic cell, here
brainly.com/question/24277123
#SPJ4
a student obtained a wet burette from the cart but failed to rinse it with a small amount of the base before starting a titration. will more or less titrant (base) be required to neutralize the acid?
The student failed to rinse a wet burette with a small amount of base before starting a titration. The student would need more titrant (base) to neutralize the acid than if they had rinsed the burette before starting the titration.
The reason for this is that when a wet burette is not rinsed with the titrant, the remaining water in the burette can dilute the titrant, thereby decreasing its concentration. If the titrant is diluted, more of it would be required to neutralize the same amount of acid. This would result in a titration that requires more titrant (base) to neutralize the acid than if the burette had been properly rinsed with the base.
In other words, not rinsing the burette with a small amount of base can affect the accuracy of the titration results. It is, therefore, important to properly rinse the burette with the titrant before starting a titration to avoid diluting the titrant and ensure accurate titration results.
In conclusion, more titrant (base) would be required to neutralize the acid if a wet burette is not rinsed with a small amount of base before starting a titration. It is essential to rinse the burette before starting a titration to avoid dilution of the titrant and ensure accurate titration results.
for more such question on titration
https://brainly.com/question/186765
#SPJ11
The specific heat of marble is 0.858 J / g How much heat (in J) is required to raise the temperature of 20.0 g of marble from 22 °C to 45 °C?
Answer:
394.68 J
Explanation:
The amount of heat gained or lost by an object when its temperature changes can be calculated by using the formula:
Specific Heat Capacity[tex]\boxed{\sf c = \dfrac{Q}{m \cdot \Delta T}}[/tex]
where:
c is the specific heat of the object.Q is the heat gained or lost in joules (J).m is the mass of the object.ΔT is the change in temperature.The initial temperature of the marble was 22°C and its final temperature is 45°C. Therefore, the change in temperature, ΔT, is:
[tex]\implies \sf \Delta T=45^{\circ}C-22^{\circ}C=23^{\circ}C[/tex]
Therefore, the values to substitute into the formula are:
m = 20.0 gc = 0.858 J / (g · °C)ΔT = (45°C - 22°C) = 23°CSubstitute these values into the formula:
[tex]\implies \sf \dfrac{0.858\;J}{g \cdot \!\!\!\!\phantom{2}^{\circ}C}}=\dfrac{Q}{20.0\;g \cdot 23 ^{\circ}C}[/tex]
[tex]\implies \sf Q=\dfrac{0.858\;J \cdot 20.0\;g \cdot 23^{\circ}C}{g \cdot \!\!\!\!\phantom{2}^{\circ}C}}[/tex]
[tex]\implies \sf Q=0.858\;J \cdot 20.0 \cdot 23[/tex]
[tex]\implies \sf Q=394.68\;J[/tex]
Therefore, 394.68 J of heat is required to raise the temperature of 20.0 g of marble from 22°C to 45°C.
[tex]\blue{\huge {\mathrm{SPECIFIC \; HEAT \; CAPACITY}}}[/tex]
[tex]\\[/tex]
[tex]{===========================================}[/tex]
[tex]{\underline{\huge \mathbb{Q} {\large \mathrm {UESTION : }}}}[/tex]
The specific heat of marble is 0.858 J/g. How much heat (in J) is required to raise the temperature of 20.0 g of marble from 22°C to 45°C?[tex]{===========================================}[/tex]
[tex] {\underline{\huge \mathbb{A} {\large \mathrm {NSWER : }}}} [/tex]
The amount of heat required to raise the temperature of 20.0 g of marble from 22°C to 45°C is 394.68 Joules.[tex]{===========================================}[/tex]
[tex]{\underline{\huge \mathbb{S} {\large \mathrm {OLUTION : }}}}[/tex]
The formula for calculating the amount of heat required to raise the temperature of an object is:
[tex]\sf Q = m \cdot c \cdot \Delta T[/tex]where
Q is the amount of heat required (in Joules),m is the mass of the object (in grams),c is the specific heat of the object (in Joules per gram degree Celsius), and[tex]\bold{\Delta T}[/tex] is the change in temperature (in degrees Celsius).Using the given values, we can plug them into the formula:
[tex]\begin{aligned}\sf Q& =\sf 20.0\: g \cdot 0.858\: J/g^{\circ}C \cdot (45^{\circ}C - 22^{\circ}C)\\& =\sf 20.0\: g \cdot 0.858\: J/g^{\circ}C \cdot 23^{\circ}C \\& = \boxed{\bold{394.68\: J}}\end{aligned}[/tex]
Therefore, the amount of heat required to raise the temperature of 20.0 g of marble from 22°C to 45°C is 394.68 Joules.
[tex]{===========================================}[/tex]
[tex]- \large\sf\copyright \: \large\tt{AriesLaveau}\large\qquad\qquad\qquad\qquad\qquad\qquad\qquad\tt 04/02/2023[/tex]
it required 10.00 ml of 0.250 m naoh to titrate 50.00 ml of h 2 so 4 (to the equivalence point). what was the original concentration of the h 2 so 4 ?
The equivalent point of the HBr calculated by using the process of titration is 28 ml.
The term Titration is defined as the process which involves the slow addition of one solution of a known concentration which is called as a titrant added to a known volume of another solution of unknown concentration until the reaction reaches to the neutralization point. It is indicated by a color change. This common laboratory method of quantitative chemical analysis which is used to determine the concentration of an identified analyte of the solution. Titrant or titrator is the reagent which is prepared as a standard solution of known concentration and volume of the solution.
Molarity of the acid is 0.140 M
Volume of acid is 40 mL
Molarity of base is 0.200 M
We have the expression for the Molarity,
M1 V1 = M2 V2
V2 = M1 V1/ M2
by putting all the values in the expression we get,
V2 = 28 ml
To learn more about Titration
https://brainly.com/question/13307013
#SPJ4
The correct question is,
What volume (in mL ) of 0.200M sodium hydroxide do we need to titrate 40.00 mL of 0.140 M HBr to the equivalence point?
all of the following are true of acid-base neutralization, except: select the correct answer below: a strong acid combined with a strong base, in stoichiometrically equal amounts, will always form a neutral solution. the combination of a weak acid with a weak base in stoichiometrically equal amounts can yield either an acidic, basic, or neutral solution. a strong acid combined with a weak base in stoichiometrically equal amounts yields an acidic solution a neutral solution is always formed when stoichiometrically equivalent amounts of an acid and a base are mixed.
A. Strong acids and bases effectively cancel each other out when combined in an equal proportion, yielding salt and water. A solution with a neutral pH (pH = 7) is also created by combining an equal amount of a strong acid and a strong base. We refer to this as a neutralizing reaction.
B. The conjugate base of the weak acid is a weak base, though, and it hardly ionizes in water. This makes the solution somewhat basic and increases the quantity of hydroxide ion generated by the process in it. It is possible to create an acidic, basic, or neutral solution by mixing a weak acid and a weak base.
c. A weakly acidic solution is produced when a strong acid and weak base are combined. This is not due of the strong acid itself, but rather because of the conjugate acid of the weak base.
Learn more about solution here:
https://brainly.com/question/2758946
#SPJ4
a 110 g molybdenum block is heated to 100.0oc and immersed in 150 g of water in a styrofoam cup. the initial temperature of the water was 24.6oc. if the final temperature of the block and the water were 28.0oc, what is the specific heat of the molybdenum?
The specific heat of molybdenum is calculated to be approximately 0.271 J/g°C.
To find the specific heat of molybdenum, we can use the heat transfer equation:
q = mcΔT
where q is the heat transferred, m is the mass, c is the specific heat, and ΔT is the change in temperature.
Calculate the heat gained by the water:
m_water = 150 g
c_water = 4.18 J/g°C (specific heat of water)
ΔT_water = 28.0°C - 24.6°C = 3.4°C
q_water = m_water × c_water × ΔT_water
q_water = 150 g × 4.18 J/g°C × 3.4°C = 2130.84 J
Calculate the heat lost by the molybdenum block:
m_molybdenum = 110 g
ΔT_molybdenum = 100.0°C - 28.0°C = 72.0°C
q_molybdenum = -q_water = -2130.84 J
Solve for the specific heat of molybdenum:
q_molybdenum = m_molybdenum × c_molybdenum × ΔT_molybdenum
c_molybdenum = q_molybdenum / (m_molybdenum × ΔT_molybdenum)
c_molybdenum = -2130.84 J / (110 g × 72.0°C)
Calculate c_molybdenum:
c_molybdenum ≈ 0.271 J/g°C
The specific heat of molybdenum is therefore approximately 0.271 J/g°C.
More on specific heat: https://brainly.com/question/12970070
#SPJ11
an element has two naturally-occurring isotopes. the mass numbers of these isotopes are 115.00 u and 117.00 u, with natural abundances of 15% and 85%, respectively. calculate its average atomic mass. report your answer to 2 decimal places.
The average atomic mass of the element is 116.70 u. To calculate the average atomic mass of an element with two naturally-occurring isotopes with mass numbers 115.00 u and 117.00 u, and natural abundances of 15% and 85%, respectively, follow these steps:
1. Convert the natural abundances into decimals: 15% = 0.15 and 85% = 0.85.
2. Multiply the mass number of each isotope by its corresponding abundance: (115.00 u × 0.15) and (117.00 u × 0.85).
3. Add the products from step 2 together: (115.00 u × 0.15) + (117.00 u × 0.85).
4. Round the result to 2 decimal places.
Calculating the values: (115.00 u × 0.15) = 17.25 u; (117.00 u × 0.85) = 99.45 u; 17.25 u + 99.45 u = 116.70 u. The average atomic mass of the element is 116.70 u.
To know more about atomic mass, refer here:
https://brainly.com/question/17067547#
#SPJ11
a buffer contains 1.0 mol of ch3co2h and 1.0 mol ch3co2- dilluted with water to 1.0 l. how many moles of naoh ware required to increase teh ph of the buffer to 5.1
For every mole of [tex]CH_3CO_2H[/tex] consumed, we need one mole of NaOH. Therefore, we need 2.23 moles of NaOH to increase the pH of the buffer to 5.1.
The dissociation reaction of acetic acid ([tex]CH_3CO_2H[/tex]) in water can be represented as:
[tex]CH_3CO_2H + H_2O[/tex] ↔ [tex]CH_3CO_2^{-} + H_3O^{+}[/tex]
This reaction involves the transfer of a proton ([tex]H^+[/tex]) from the acid ([tex]CH_3CO_2H[/tex]) to water, resulting in the formation of its conjugate base [tex](CH_3CO_2^-)[/tex] and a hydronium ion ([tex]H_3O^+[/tex]). The equilibrium constant expression for this reaction is:
[tex]Ka = [CH_3CO_2^-][H_3O^+] / [CH_3CO_2H][/tex]
At the pH of the buffer (around 4.76), the concentrations of [tex]CH_3CO_2H[/tex]and [tex]CH_3CO_2^-[/tex] are equal, which means that [tex][CH_3CO_2^-] = [CH_3CO_2H][/tex]. Therefore, the equilibrium constant expression simplifies to:
[tex]Ka = [H_3O^+] = [CH_3CO_2^-] / [CH_3CO_2H][/tex]
To increase the pH of the buffer to 5.1, we need to add hydroxide ions [tex](OH^-)[/tex] to the solution. The reaction between hydroxide ions and hydronium ions can be represented as:
[tex]OH^- + H_3O^+[/tex] ↔ [tex]2H_2O[/tex]
We can use the Henderson-Hasselbalch equation to calculate the amount of NaOH required to achieve the desired pH:
[tex]pH = pKa + log([CH_3CO_2^-] / [CH_3CO_2H])\\5.1 = 4.76 + log([CH_3CO_2^-] / [CH_3CO_2H])\\log([CH_3CO_2^-] / [CH_3CO_2H]) = 0.34\\[CH_3CO_2^-] / [CH_3CO_2H] = 2.23\\[CH_3CO_2^-] = [CH_3CO_2H] x 2.23\\[CH_3CO_2^-] = 2.23 mol\\[CH_3CO_2H] = 1.0 mol[/tex]
We need to add enough NaOH to the solution to convert 2.23 moles of [tex]CH_3CO_2H[/tex] to [tex][CH_3CO_2^-][/tex] and increase the pH to 5.1. The reaction between NaOH and [tex]CH_3CO_2H[/tex]can be represented as:
[tex]NaOH + CH_3CO_2H[/tex]→ [tex]CH_3CO_2^- + Na^+ + H_2O[/tex]
For more question on pH click on
https://brainly.com/question/12609985
#SPJ11