Use manual gearbox to lessen the impact of force.
since we have not much space to maneuver we will identify all the possible sources.
through this sources try to minimize the damage as much as possible
Firstly we will try this :
1)
The car would try to slow down as much as it could and avoid the collision if it had a manual gearbox.
Second option could be:
2)
On the other hand, if the automobile has an automatic transmission, try to stop as hard as you can, but just before you strike the truck, to prevent going under it and lessen the force of the contact.
Last resort should be:
3)
The handbrake may also be engaged as a third option, which would cause my car to turn and attempt to avoid hitting the other car.
In case the highway is not barricaded on left side as an emergency measure we could crash off road.
learn more about vehicle handling here:
https://brainly.com/question/3275086
#SPJ4
the presence of suggests that an object has weight and gravity, while the absence of it suggests lightness or airiness.
Three-dimensional shape the presence of suggests that an object has weight and gravity, while the absence of it suggests lightness or airiness.
What do you mean by three-dimensional shape?A solid figure, object, or shape with three dimensions—length, breadth, and height—is known as a three-dimensional shape in geometry. Three-dimensional shapes have height, which is equivalent to thickness or depth, unlike two-dimensional shapes. These objects are sometimes referred to as 3-D forms because three dimensions can also be written as 3-D. Every 3-D shape takes up space, which is quantified by volume. For instance, The fundamental 3-dimensional shapes we encounter every day include a cube, rectangular prism, sphere, cone, and cylinder. We can see 3-D shapes all around us. A square prism can be seen in a book and a box, a cube in a Rubik's Cube and a die, etc.
To learn more about Three dimensional, Visit:
https://brainly.com/question/326906
#SPJ4
An alien spaceship traveling at 0.600 c toward the Earth launches a landing craft. The landing craft travels in the same direction with a speed of 0.800 c relative to the mother ship. As measured on the Earth, the spaceship is 0.200 ly from the Earth when the landing craft is launched.(d) If the landing craft has a mass of 4.00 × 10⁵ kg , what is its kinetic energy as measured in the Earth reference frame?
The kinetic energy as measured in the Earth reference frame is 6.704*10^22 Joules.
To find the answer, we have to know about the Lorentz transformation.
What is its kinetic energy as measured in the Earth reference frame?It is given that, an alien spaceship traveling at 0.600 c toward the Earth, in the same direction the landing craft travels with a speed of 0.800 c relative to the mother ship. We have to find the kinetic energy as measured in the Earth reference frame, if the landing craft has a mass of 4.00 × 10⁵ kg.
[tex]V_x'=0.8c\\V=0.6c\\m=4*10^5kg[/tex]
Let us consider the earth as S frame and space craft as S' frame, then the expression for KE will be,[tex]KE=m_0c^2=\frac{mc^2}{1-(\frac{v_x^2}{c^2} )}[/tex]
So, to [tex]V_x=(0.8+0.6)c-[\frac{0.6c*(0.8c)^2}{c^2}]=1.016[/tex]find the KE, we have to find the value of speed of the approaching landing craft with respect to the earth frame. We have an expression from Lorents transformation for relativistic law of addition of velocities as,[tex]V_x'=\frac{V_x-V}{1-\frac{VV_x}{c^2} } \\thus,\\V_x=V_x'(1-\frac{VV_x}{c^2} )+V[/tex]
Substituting values, we get,[tex]V_x=0.8c(1-\frac{0.8c*0.6c}{c^2} )+0.6c=(0.8c*0.52)+0.6c=1.016c[/tex]
Thus, the KE will be,[tex]KE=\frac{4*10^5*(3*10^8)^2}{\sqrt{1-\frac{(1.016c)^2}{c^2} } } =\frac{1.2*10^{22}}{0.179}=6.704*10^{22}J[/tex]
Thus, we can conclude that, the kinetic energy as measured in the Earth reference frame is 6.704*10^22 Joules.
Learn more about frame of reference here:
https://brainly.com/question/20897534
#SPJ4
two small charged objects repel each other with a force 2.53 when separated by a distance 0.11. if the charge on each object is reduced to 67.9% of its original value and the distance between them is reduced to 0.053 the force becomes
The force between the charges will be 10.9 N.
What is the electrostatic force?The electrostatic attraction particles that make up the electrostatic force behave as both an attracting and a repulsive force. The force is inversely proportional to the square of the distance between them.
F ∝ 1 / r²
F = k / r²
Fr² = k
When two tiny charged objects are 0.11 of a distance apart, they repel one another with a force of 2.53. If the distance between the two particles is cut to 0.053 and the charge on each item is decreased to 67.9% of its initial amount. Then the force will be
F₁r₁² = F₂r₂²
2.53 × (0.11)² = F × (0.053)²
F = 10.9 N
More about the electrostatic force link is given below.
https://brainly.com/question/9774180
#SPJ4
Explain grounding in your own words
Compare Ampère's law with the Biota-Savart. law. Which is more generally useful for calculating →B for a current carrying conductor?
Both the law and its application make advantage of closed loops and symmetries.
Comparing Ampere's law to Biot-Savart law, the former is simpler to apply. In more complicated situations when symmetry cannot be applied, the Biot-Savart law is used.
Ampere's law is more helpful and simpler to apply if there is symmetry.
Gauss's law is used to compute the electric field, while Ampere's law is used to calculate the magnetic field.
What does the Biot-Savart law mean, and why is it important?The significance of the Biot-Savart law is as follows:
In electrostatics, Biot-Savart law is comparable to Coulomb's law.The law also applies to conductors that convey current but are very small in size.The law is applicable when the distribution of current is symmetrical.Both Ampere's law and the Biot-Savart law are applied to determine the magnetic field generated by a conductor that is carrying current. When there is symmetry present, we often employ Ampere's law.
To learn more about Biot-Savart law, visit:
https://brainly.com/question/1120482
#SPJ4
Suppose you are transported to a planet with twice the mass of earth, but the same radius of earth. Your weight would __________ by a factor of __________.
Answer:تاتا البال،ًـلاللبببلا
لولاليثقغاايصسضشطذدزلب
Explanation:ابرلرتهىغرلب
If the mass of a planet is 3. 10 1024 kg, and its radius is 2. 00 106 m, what is the magnitude of the gravitational field, g, on the planet's surface?
The gravitational field strength is 51.6925 N/kg.
We need to know about the gravitational field to solve this problem. The gravitational field is the area where affected by gravitational force. The magnitude of the gravitational field can be calculated by this equation
g = G . m / r²
where g is the gravitational field, G is gravitational constant (6.67 x 10¯¹¹ Nm²/kg²), m is the mass of the planet and r is the radius of the planet
From the question above, we know that
m = 3.10 x 10²⁴ kg
r = 2.00 x 10⁶ m
By substituting the given parameter, we get
g = G . m / r²
g = 6.67 x 10¯¹¹ . 3.10 x 10²⁴/ (2.00 x 10⁶)²
g = 51.6925 N/kg
Find more on gravitational field at: https://brainly.com/question/14080810
#SPJ4
a negative charge is placed at the center of a ring of uniform positive charge. what is the motion (if any) of the charge? what if the charge were placed at a point on the axis of the ring other than the center?
The electric field at the center of uniformly charge ring is zero if the charge were placed at a point on the axis of the ring other than the center.
if the charge were placed at a point on the axis of the ring other than the center the electric field then there is no motion.
electric field - It is a force produced by any charge near its surrounding.
If the charge were placed at a point on the axis of the ring other than the center then there is no motion because at the center of the ring E.F ( Electric field is zero.
electric filter the point on the axis of uniformly charged ring depend on the distance of the point from the center of the ring.
.
E.F = 0 because each half cancels each other . the negative charge will be in equilibrium as every part of the ring is uniformly attracted by it.
The electric field at the center of uniformly charge ring is zero if the charge were placed at a point on the axis of the ring other than the center.
To know more about electric field :
https://brainly.com/question/15800304
#SPJ4
Study the graph below, it represents a motion with 3 distinct parts. Pay particular attention to label on the y-axis. Using at least 1 complete sentence, describe what is happening during each part of the motion. [your answer must include words and phrases that describe motion. Suggested examples are things like accelerating, constant velocity, backward, forward, at rest, stop]
We describe the motion in the graph as
In the first 2 seconds, the motion of the object is that it at rest. From t = 2 seconds to t = 4 seconds, the motion of the object is that it accelerating. For t = 4 seconds to t = 6 seconds, the motion of the object is that it is moving with constant velocityWhat is motion?Motion is the change in position of an object with time.
How to describe the motion in the graph?Since on the graph
the y - axis is represented by velocity and the x - axis is represented by time,Motion from t = 0 to t = 2 secondsFrom the graph, in the first 2 seconds, the motion of the object is described as the object is at rest.
Motion from t = 2 to t = 4 secondsFrom the time , t = 2 seconds to t = 4 seconds, we see that the graph has a positive slope. During this time interval, from t = 2 seconds to t = 4 seconds, the object is accelerating.
So, the motion of the object is described as the object is accelerating
Motion from t = 4 to t = 6 secondsFor the time interval t = 4 seconds to t = 6 seconds, we see that the velocity is a straight line parallel to the x(time) axis. This implies that the velocity of the object is constant for t = 4 seconds to t = 6 seconds. So, for t = 4 seconds to t = 6 seconds, the motion of the object is described as object is moving with constant velocity
So, we describe the motion in the graph as
In the first 2 seconds, the motion of the object is that it is at rest. From t = 2 seconds to t = 4 seconds, the motion of the object is that it is accelerating. For t = 4 seconds to t = 6 seconds, the motion of the object is that it is moving with constant velocityLearn more about motion graph here:
https://brainly.com/question/27918449
#SPJ1
Pleaseeeeeee help me out.
The give scenarios illustrates the following laws of motion respectively:
Pushing a baby on a swing is easier than pushing an adult on the same swing - Second law Water spills from a glass carried by someone who is walking steadily and suddenly stops short - First lawWhen thrown with the same force, a soccer ball accelerates more than a bowling ball - Second lawA magician pulls a tablecloth out from under a dish on a table without disturbing the dish - Third lawA rocket launches into space, pushing fuel exhaust in one direction and the rocket in the opposite direction - Third lawA book rests on top of a shelf and does not move until a student accidentally knocks it off - First lawWhat are the three laws of motion?The three laws of motion are stated below as follows:
First law - it states that a body continues in its state of rest or uniform motion in a straight line unless acted upon by an external force. This is also known as the law of inertia.
Second law - it states that the rate of change of the momentum of a body is directly proportional to the applied force and takes place in the direction of the applied force. This law is restated as acceleration is proportional to force and inversely proportional to mass.
Third law - for every force, there is an equal and oppositely directed reaction.
Considering the individual scenarios:
Pushing a baby on a swing is easier than pushing an adult on the same swing - Second law
Water spills from a glass carried by someone who is walking steadily and suddenly stops short - First law
When thrown with the same force, a soccer ball accelerates more than a bowling ball - Second law
A magician pulls a tablecloth out from under a dish on a table without disturbing the dish - Third law
A rocket launches into space, pushing fuel exhaust in one direction and the rocket in the opposite direction - Third law
A book rests on top of a shelf and does not move until a student accidentally knocks it off - First law
Learn more about laws of motion at: https://brainly.com/question/25545050
#SPJ1
6 A gun fires a shell at an angle of elevation of 30⁰ with a velocity of 2 x 10³ ms. What are the horizontal and vertical components of the velocity? What is the range of the shell? How high will the hall rise?
1. The horizontal component of the velocity is 1.73×10³ m/s
2. The vertical component of the velocity is 1×10³ m/s
3. The range of the shell is 3.53×10⁵ m
4. The maximum height reached is 1.53×10⁵ m
1. How to determine the horizontal component of the velocity
Initial velocity (u) = 2×10³ m/sAngle of projection (θ) = 30 °Horizontal velocity =?Horizontal velocity = u × Cosθ
Horizontal velocity = 2×10³ × Cos30
Horizontal velocity = 1.73×10³ m/s
2. How to determine the vertical component of the velocity
Initial velocity (u) = 2×10³ m/sAngle of projection (θ) = 30 °Vertical velocity =?Vertical velocity = u × Cosθ
Vertical velocity = 2×10³ × Sin30
Vertical velocity = 1×10³ m/s
3. How to determin the range
Initial velocity (u) = 2×10³ m/sAngle of projection (θ) = 30 °Acceleration due to gravity (g) = 9.8 m/s²Range (R) =?R = u²Sine(2θ) / g
R = (2×10³)² × Sine (2×30) / 9.8
R = 3.53×10⁵ m
4. How to determine the maximum height
Initial velocity (u) = 2×10³ m/sAngle of projection (θ) = 30 °Acceleration due to gravity (g) = 9.8 m/s²Maximum height (H) =?H = u²Sine²θ / 2g
H = [(2×10³)² × (Sine 30)²] / (2 × 9.8)
H = 1.53×10⁵ m
Learn more about projectile motion:
https://brainly.com/question/19128146
#SPJ1
An electric field of magnitude 3.50 kN/C is applied along the x axis. Calculate the electric flux through a rectangular plane 0.350m wide and 0.700m long (c) if the plane contains the y axis and its normal makes an angle of 40.0° with the x axis.
The value of electric flux for mentioned plane will be 657N⋅m²/C at 40° with the x axis.
For a uniform electric field passing through a plane surface,
electric flux(ϕ)=EAcosθ
where,
θ is the angle between the electric field and the normal to the surface,
E is the electric field
A is surface area
(a) The electric field is perpendicular to the surface so θ=0
=(3,50×10³ N/C)[(0.350m)(0.700m)]cos0
=858N⋅m²/C
(b)
The electric field is parallel to the surface θ=90
, so cosθ=0
therefore,
the flux is zero.
(c) For the mentioned plane,
electric flux(ϕ)=(3.50×10³N/C)[(0.350m)(0.700m)]cos40.0
=657N⋅m²/C
learn more about electric flux here:
https://brainly.com/question/17052775
#SPJ4
The Earth’s radius is 6.4 x 10^6 m and 1kg = 2.2lb. What is the force that the Earth exerts on you?
Using what you found out in question 1, what is the force that you exert on the Earth?
What would the Sun’s force be on the Earth, if our planet were twice as far from the Sun as it is now?
How does that force (from number 3) compare to the force from the Sun at our present location?
The force the earth exerts on a person that is 1 kg is 9.8 N.
The force the person exert on earth is 9.8 N.
If our planet were twice as far from the Sun as it is now, the Sun’s force on the Earth will be quarter the initial value.
Force the Earth exerts on you
The force the earth exerts on you is calculated as follows;
F = mg
where;
g is the acceleration due to gravity of EarthF = 1 kg x 9.8 m/s²
F = 9.8 N
Thus, the force the earth exerts on an object that is 1 kg is 9.8 N.
Also, based on Newton's third law of motion, the force the exerts on you is equal to the force you exert on Earth.
Force between the Earth and SunF = GmM/R²
where;
m is mass of EarthM is mass of the sunG is gravitation constantR is the distance between the sun and the earthF = (6.67 x 10⁻¹¹ x 5.97 x 10²⁴ x 1.98 x 10³⁰) / (150.23 x 10⁹)²
F = 3.5 x 10²² N
When our planet is twice as farF = GmM/(2R)²
F = GmM/(4R²)
F = ¹/₄GmM/R²
Thus, if our planet were twice as far from the Sun as it is now, the Sun’s force on the Earth will be quarter the initial value.
Learn more about gravitational force here: https://brainly.com/question/72250
#SPJ1
two charges experience exert a force of 1n on each other when they are 1m apart. what force will these charges experience if they are placed 2m apart?
The force experienced by the charges when they are placed 2 m apart will be 0.25 N.
The force between two charges is given by Coulomb’s Law.
According to this law, the force between two charges varies inversely as the square of the distance between the charges and is directly proportional to the product of the magnitude of the two charges.
The above statement is represented by the following equation,
F= K Q1 x Q2/r^2
Here, F = Force between the two charges
K = Constant
Q1 and Q2 = Magnitude of the two charges
r = Separation between the two charges
According to this equation, the force is inversely proportional to the square of the distance between two charges.
Initially, when the two charges are 1 m apart, the force is 1 N.
When the distance between the two charges is doubled,
then according to Coulomb’s Law, the force should decrease by 4 times.
Hence, if the charges are placed 2 meters apart, the force becomes 1/4= 0.25 N.
To know more about "Coulomb's Law", refer to the following link:
brainly.com/question/9261306?referrer=searchResults
#SPJ4
what is the magnitude (in n/c) and direction of an electric field that exerts a 2 x 10-5 n upward force on a -1.2 µc charge? 1µc
|E| = 16.67 N/C and the direction of this Electric field is in the downward direction.
We have a Charge particle present inside a Electric field.
We have to determine the magnitude (in n/c) and direction of an electric field that exerts a 2 x [tex]10^{-5}[/tex] Newton.
What is Electric Field Intensity?The electric field intensity at a point R meters away from a charge Q is the amount of force experienced by the test charge ([tex]$q_{o}[/tex]) of unit magnitude at a distance R meters away the Charge Q. Mathematically -
E = [tex]$\frac{F}{q}[/tex]
According to the question, we have -
F = 2 x [tex]10^{-5}[/tex] Newton
|Q| = - 1.2 [tex]\mu[/tex]C = - 1.2 x [tex]10^{-6}[/tex] [tex]\mu[/tex]C = 1.2 x [tex]10^{-6}[/tex] [tex]\mu[/tex]C
Therefore -
E = [tex]$\frac{2\times 10^{-5} }{1.2\times 10^{-6} }= \frac{100}{6} = 16.67\;N/C[/tex]
Therefore -
|E| = 16.67 N/C and the direction of this Electric field is in the downward direction.
To solve more questions on Electric fields, visit the link below-
https://brainly.com/question/17141463
#SPJ4
Consider a solenoid that is very long compared with its radius. Of the following choices, what is the most effective way to increase the magnetic field in the interior of the solenoid? (a) double its length, keeping the number of turns per unit length constant (b) reduce its radius by half, keeping the number of turns per unit length constant (c) overwrap the entire solenoid with an additional layer of current-carrying wire
Increasing the coil's number of turns expanding the current. Putting a core made of iron into the solenoid.
(a) Because Bpropto n states that the magnetic field will grow if the number of turns per unit length is increased.
(b) Once more, B=mu 0(H+M)=mu 0(nI+M) is true, with M being the magnetization of the magnetic material. Therefore, the magnetic field will intensify if we place a magnetic substance within the solenoid.. (correct option)
c) because, according to Bpropto I, the magnetic field will increase if we raise the current.. (correct option)
(d) Because Bpropto frac1 L, if we lengthen it but keeping the total number of turns same , the magnetic field will decrease....(option (d) is incorrect)
(e) If we keep the number of turns per unit length constant , the magnetic field will unchanged ....(option (e) is incorrect )
what is referred by the cross sectional area of a solenoid?The way it is wound, or more specifically, the circle, is referred to as the cross section. Circle does not depend on what it has within.
A solenoid is a wire wound in general in a circular shape, even when it is not forced, the cross section refers to the way in which it is wound, in general to the circle and is joined to determine the area A = π r². This circle is the same whether it is in the air, a liquid, or a solid because it is independent of what is inside,
To learn more about solenoid , visit :
https://brainly.com/question/2204343
#SPJ4
To launch a 100 kg human so that he leaves a cannon moving at a speed of 4 m/s, you need a spring with an appropriate spring constant. This spring will be compressed 2. 0 m from its natural length to launch the person. Which spring constant do you need?.
To launch a 100 kg human so that he leaves a cannon moving at a speed of 4 m/s, you need a spring with an appropriate spring constant. This spring will be compressed 2. 0 m from its natural length to launch the person.400N/m spring constant is needed.
What is spring constant k?The spring constant, k, is a proportional constant. It gauges how firm the spring is. When a spring is compressed or extended to a length that differs by an amount x from its equilibrium length, it produces a force F = -kx that pushes it back towards its equilibrium position.
To know more about spring constant visit:
https://brainly.com/question/20388857
#SPJ4
a wet bicycle tire leaves a trace of water on the floor.the tire has a radius of 30 cm,and the bicycle wheel makes 3 full rotations before stopping.
565.2 cm trace of water left on the floor
Given that,
A wet bicycle tire leaves a trace of water on the floor
The tire has a radius of 30 cm. and the bicycle wheel makes 3 full rotations before stopping
The trace of water left on the floor is the circumference of cycle
The circumference of circle is:
r = 30 cm
Therefore,
Given that,
bicycle wheel makes 3 full rotations before stopping
trace of water = 3 x 188.4 = 565.2
Thus, 565.2 cm trace of water left on the floor.
To know more about “Circumference of the circle”
Refer this link:
https://brainly.in/question/8702610
#SPJ4
What happens to the interference pattern that results from the diffraction of electrons passing through two closely spaced slits if the rate of electrons going through the slits is decreased to one electron per hour?.
The interference pattern remains the same if the rate of electrons going through the slits is decreased to one electron per hour during a diffraction process.
What is Interference?This is referred to as a condition which occurs when two waves meet and combine while traveling along the same medium such as air, water etc.
The interference pattern is the same if the the rate of electrons going through the slits is decreased to one electron per hour during a diffraction process. The decrease in the rate of electrons doesn't affect the pattern of the waves being a constructive or destructive one.
Read more about Interference here https://brainly.com/question/9655287
#SPJ1
a block weighing 10 lbf and having dimensions 10 in. on each edge is pulled up an inclined surface on which there is a film of sae 10w oil at 100c f. if the speed of the block is 2 ft/s and the oil film is 0.001 in. thick, find the force required to pull the block. assume the velocity distribution in the oil film is linear. the surface is inclined at an angle of 25° from the horizontal.
The force required to pull the block will be 13.89 kN.
What is the force?Let μ be the viscosity of oil, y be thickness, v be the velocity of the block, and A be the base area of the block. Then the force is given as,
F = μAv / y
An inclined surface with a coating of sae 10w oil at 100°C is dragged up by a block that weighs 10 lbf and measures 10 in on each edge. if the oil coating is 0.001 in. thick and the block is moving at a speed of 2 ft/s. Assume that the oil film's velocity distribution is linear. A 25° angle from the horizontal separates the surface from the horizontal.
The diagram is given below. Then the force is given as,
F - 10 sin 25° = 10 × (10 / 12)² × 2 / 0.001
F = 4.226 + 13888.89
F = 13893.1 N
F = 13.89 kN
13.89 kN of force will be required for pulling the block.
More about the force link is given below.
https://brainly.com/question/13191643
#SPJ4
in europe, gasoline efficiency is measured in km/l . if your car's gas mileage is 36.0 mi/gal , how many liters of gasoline would you need to buy to complete a 142- km trip in europe? use the following conversions: 1km
By converting the unit, the gas needed to complete a 142 km trip is 11.15 liters.
We need to know how to convert from mile and gallon to km and liter units to solve this problem. The conversions unit is
1 mile = 1.60934 km
1 gal = 4.54609 liter
From the question above, we know that:
gas mileage = 36 mi / gal
distance = 142 km
Convert the gas mileage to km/l
gas mileage = 36 mi / gal
gas mileage = 36 x 1,60934/4.54609 km/l
gas mileage = 12.74 km/l
Find the required gas
required gas = distance / gas mileage
required gas = 142 / 12.74
required gas = 11.15 liters
Hence, the gas needed to complete a 142 km trip is 11.15 liters.
For more about unit at: https://brainly.com/question/19493296
#SPJ4
100 points,
The National Park Service sometimes creates controlled burns to mitigate wildfires. How does a controlled burn limit the spread of wildfires?(1 point)
A controlled burn is used to make a path that helps a spreading wildfire arrive at a source of water.
A controlled burn temporarily shuts down parks so people won’t start campfires.
A controlled burn helps to remove plants and vegetation around buildings so a wildfire won’t destroy them.
A controlled burn removes dead vegetation that might otherwise help a wildfire start and spread.
A controlled burn removes dead vegetation that might otherwise help a wildfire start and spread.
What is a controlled burns?The term controlled burn refers to setting up an area in which the fire is controlled in order to avoid wild fires. These are deliberately set up in order to avoid the bush from burning down.
Let us recall that a wild fire is able to blaze across a large causing damage to a buildings as well as life and other properties in the way of the fire and could cause huge looses including loss of habitat.
Thus, the National Park Service sometimes creates controlled burns to mitigate wildfires because a controlled burn removes dead vegetation that might otherwise help a wildfire start and spread.
Learn more about controlled burns:https://brainly.com/question/1703990
#SPJ1
Calculate the centripetal force exerted on the earth by the sun. Assume that the period of revolution for the earth is 365. 25 days, the average distance is 1. 5 × 108 km and the earth’s mass is 6 × 1024 kg.
The centripetal force exerted on the earth by the sun is 3.56775 × 10²² N.
Mass of the Earth, m = 6 × 10²⁴ kg
The average distance between the Sun and the Earth is, r = 1.5 × 10⁸ km . r = 1.5 × 10¹¹ m
The path of the Earth around the Sun is circular, with a circumference:
c = 2πr
c = 2 × 3.1416 × 1.5 × 10¹¹ m
c = 9.42478 × 10¹¹ m
The Earth takes time of T = 365.25 days to complete one revolution around the Sun, that is to travel the distance of c.
T = (365.25 days) × (24hr/1day) × (60min/1hr) × (60s/1min)
T = 3.15576 × 10 ⁷s.
Thus the velocity of the Earth is,
v = c/T
v = (9.42478 × 10¹¹ m) / (3.15576 × 10 ⁷s)
v = 2.98653 × 10⁴ m/s
The centripetal force exerted on the Earth by the Sun is given by,
F = 2mv/r
F = 2× (6 × 10²⁴ kg) × (2.98653 × 10⁴ m/s ) /(1.5 × 10¹¹ m)
F = 3.56775 × 10²² N
Therefore, the centripetal force exerted on the earth by the sun is 3.56775 × 10²² N
Read more about Centripetal force:
https://brainly.com/question/14021112
#SPJ4
A meteor is falling to earth and enters the Earth’s atmosphere at 0=−435 ŷ, if it experiences an acceleration due to Earth’s gravity of =−9.8 2ŷ, how what will its velocity be after t= 13s? (assume all motion is vertical, which means on the y-axis. You will use ŷ for up, and - ŷ for down)
At 13 seconds, the meteor's velocity is - 562.4 m / s, if it enters the earth's atmosphere at - 435 m / s
We know that,
v = u + at
where,
v = Final velocity
u = Initial velocity
a = Acceleration
t = Time
Given that,
u = - 435 m / s
a = - 9.8 m / s²
t = 13 s
v = - 435 - ( 9.8 * 13 )
v = - 562.4 m / s
Velocity is the rate of change of distance with respect to time. It is denoted by V.
Therefore, at 13 seconds, the meteor's velocity is - 562.4 m / s, if it enters the earth's atmosphere at - 435 m / s
To know more about Velocity
https://brainly.com/question/18084516
#SPJ1
determine the car’s instantaneous velocity at t=5s
Answer:
In the given graph,
Velocity is constant between 4 to 8 which is 2m/s
So, at t=5s
Instantaneous velocity=2m/s
Explanation:
hope this help u thank u
What is the active volcanoes
A reconnaissance plane flies 615 km away from
its base at 918 m/s, then flies back to its base
at 1377 m/s.
What is its average speed?
Answer in units of m/s.
The average speed of the plane is 3,967.7km/h or 1,102.15m/s.
Speed is a scalar number in kinematics that quantifies how quickly an item is moving. Since the plane's speed might fluctuate, we refer to the plane's average speed when describing its rate of motion. The whole distance travelled is divided by the total amount of time required to go that distance to arrive at this pace.
[tex]speed = \frac{distance}{time}[/tex]
For, [tex]time (t_{1} ) = \frac{615}{918}[/tex]
as 1m/s = 3.6km/h , therefore,
[tex]time (t_{1} ) = \frac{615}{918*3.6}[/tex]
[tex]time (t_{1} ) = 0.186 hours[/tex]
For, [tex]time(t_{2} ) = \frac{615}{1377}[/tex]
as 1m/s = 3.6km/h , therefore,
[tex]time (t_{2} ) = \frac{615}{1377*3.6}[/tex]
[tex]time (t_{2} ) = 0.124 hours[/tex]
Thus, the average speed of plane is,
[tex]s = \frac{615+615}{0.124+0.186}[/tex]
s = 3967.7km/h
or, [tex]\frac{3967.7}{3.6}[/tex] m/s = 1,102.15m/s
Therefore, the average speed of the plane is 3,967.7km/h or 1,102.15m/s.
Learn more about speed here:
https://brainly.com/question/3004254
#SPJ9
f a ball is thrown into the air with an initial velocity of 50 ft/s, its height in feet after t seconds is given by y
The instantaneous velocity of the ball is 18ft/s.
What is velocity?
The pace at which an object's position changes as perceived from a particular point of view and as measured by a particular unit of time (for example, 60 km/h northbound) is defined as its velocity. Velocity is a fundamental concept in kinematics, the branch of classical mechanics that deals with the motion of bodies.
In order to be defined, the physical vector quantity known as velocity needs to have both a magnitude and a direction. Speed is a coherent derived unit whose quantity is measured in metres per second (m/s or m/s1) in the SI. Speed is the scalar absolute value (magnitude) of velocity (metric system).
Calculations:
at t=1s, the height is y=50(1)-16(12)=34ft.
at t=1.1s, the height is y=50(1.1)-16(1.12)=35.64ft
Between these two heights, the change in time is 0.1s. The change in height is 35.64ft-34ft=1.64ft.
Therefore [tex]V_{avg}=\frac{del y}{del t} = \frac{1.64ft}{0.1s} =16.4ft/s[/tex]
at t=1.01s, the height is y=50(1.01)-16(1.012)=34.1784ft
between t=1.01s and t=1s the change in time is 0.01s and the change in height is 0.1784ft.[tex]V_{avg}=\frac{0.1784ft}{0.01s} =17.84ft/s[/tex]
at t=1.001, the height is y=50(1.001)-16(1.0012)=34.017984ft
between t=1s and t=1.001s, the change in time is 0.001s and the change in height is 0.017984ft
[tex]V_{avg} =\frac{0.017984ft}{0.001s}=17.984ft/s[/tex]
It appears that as the time interval approaches 0, the average velocity approaches 18ft/s. Therefore it is safe to assume the instantaneous velocity at t=1s is 18ft/s.
To learn more about velocity,visit:
https://brainly.com/question/24135686
#SPJ4
which describe the study of spectroscopy? select the two correct answers.(1 point) interaction of light and atoms interaction of light and atoms emission and absorption of light emission and absorption of light the number of galaxies the number of galaxies reflection of light by earth
Spectroscopy is the study of the absorption and emission of light and other radiation by matter.
How can we conclude the statement?Spectroscopy is the interaction of lights and atoms and the study of the emission and absorption of light.
Spectroscopy can be defined as the study of light absorption as well as its emission. It is also uses to study of structure of atoms.
It offers techniques that has to do with how a sample responds to the radiation of light.
Its applications are:
Used to determine atomic structure To determine metabolic functionsstudies spectral emissionsHelps to improve the effectiveness of drugsLearn more about Spectroscopy:
https://brainly.com/question/14854785
#SPJ4
A string of length L , mass per unit length μ, and tension T is vibrating at its fundamental frequency. (iii) If the tension is doubled, with all other factors held constant, what is the effect on the fundamental frequency? Choose from the same possibilities as in part (i).
The fundamental frequency will observe the change by the multiple of [tex]\sqrt{2}[/tex]
The fundamental frequency of a standing wave which has
string of length L
mass per unit meu
has the tension T
is given by f = 1/2L[tex]\sqrt{T/meu}[/tex]
Now we are required to find if the tension is doubled, with all other factors held constant, what will be the effect on the fundamental frequency
According to the formula,
the fundamental frequency f is directly proportional to the factor of square root
Hence, when the tension of the string is doubled while other factors of the system remain constant ,the formula will become
f= 1/2L[tex]\sqrt{2T/meu}[/tex]
Hence the change in the fundamental frequency will be of the factor [tex]\sqrt{2}[/tex]
Therefore, the change will be of [tex]\sqrt{2}[/tex]
Disclaimer: the question has missing part 1 and part 2 and hence part 1 has not been answered
For further reference:
https://brainly.com/question/20732973?referrer=searchResults
#SPJ4