Why do some ladders have a white tip or reflective tape attached to the tip?

Answers

Answer 1

To increase visibility when you find yourself in dark conditions when it’s hard to see.

Related Questions

1. Plot the normal and shear components of stress on the fictitious element relative to (1) Cartesian coordinator system, (2) a cylindrical coordinator system, and (3) a spherical coordinate system. Note: Your drawing should be by hand and in a 3D manner. Write the stress notation in matrix form for three coordinator systems. Explain the biological motivations for using the above three coordinator systems.

Answers

Answer:

d

Explanation:

a hallow steel tube 3.5m long has external diameter of 120mm. in order to determine the internal diameter the tube was subjected to a tensile load of 400KN and extension was measured to be 2 mm. if the modulus of elasticity for the tube material is 200 GPa. determine the internal diameter of the tube.​

Answers

Answer:

Please check the photo (solve)

4. When welding, the practice metal is called a

Answers

Answer:

Nonstandard

Explanation:

Investigate the ripple factor of half wave and full wave rectifier, which rectifier has improved ripple factor?

Answers

Answer:The ripple factor is the ratio between the RMS value of the AC voltage (on the input side) and the DC voltage (on the output side) of the rectifier. The formula for ripple factor is: Which can also be rearranged to equal: The ripple factor of half wave rectifier is equal to 1.21 (i.e. γ = 1.21).

Explanation: i no it

Why did you choose agricultural and biosystem as a course? Help me guys

Answers

Answer:

To be able to develop as a human and give back to the community. To ensure that people have safe food and water to drink, clean fuel and energy sources, and in general a safe enviornment to live in.

Explanation:

The reasons why someone might choose to study agricultural and biosystems engineering are highly individual and can depend on a variety of factors, such as personal interests, career goals, and educational background.

What is agricultural and biosystem engineering?

Many students who decide to study agricultural and biosystems engineering are interested in farming, making food, and sustainable agriculture. They might want to find new ways to make more food or improve how farmers work.

Agricultural and biosystems engineering is a field that focuses on creating systems and processes that are good for the environment.

Students who care about the environment may decide to learn about this subject because it focuses on reducing waste, saving resources, and causing less harm to the environment.

Agricultural and biosystems engineering is a field that combines different areas of knowledge such as biology, chemistry, physics, and computer science. Students who like to work in different subjects might find this field perfect for their interests and abilities.

Learn more on biosystem on https://brainly.in/question/53109597

#SPJ2

How to make coconut harder

Answers

Now hear me out: Steel-Coated Coconuts

If you want to make a coconut harder you can take that shell up to heights its natural husk never even knew it could reach! Combining the raw, brown scraglley-ness with the tough, durable properties of steel would most definitely make a coconut harder.

Valid answer? Probably not.

Thank you for coming to TedTalk :))

Make it out of metal

Determine the gage pressure at the center of pipe A in pounds per square inch and

in kilopascals.

Answers

Answer: the stress is 384 pounds per square inch.

Step-by-step explanation:

Let S represent the stress in the material of the pipe.

Let P represent internal pressure of the pipe.

Let D represent internal diameter of the pipe.

Let T represent the thickness of the pipe.

The stress in the material of a pipe subject to internal pressure varies jointly with the internal pressure and the internal diameter of the pipe and inversely with the thickness of the pipe. Introducing a constant of proportionality, k, the expression becomes

S = kPD/T

The stress is 100 pounds per square inch when the diameter is 5 inches, the thickness is 0.75 inch, and the internal pressure is 25 pounds per square inch. It means that

100 = (k × 25 × 5)/0.75

125k = 100 × 0.75 = 75

k = 75/125 = 0.6

The equation representing the relationship becomes

S = 0.6PD/T

If the internal pressure is 40 pounds per square inch, the diameter is 8 inches and the thickness is 0.50 inch, then the stress would be

S = (0.6 × 40 × 8)/0.5

S = 384

A gas turbine power plant is being designed using an air-standard Brayton cycle. Air enters the compressor with a volumetric flow rate of 7 m3 /s at 100 kPa, 300 K. The turbine inlet temperature is expected to be 1400 K. The compressor pressure ratio is 10. The turbine exhaust goes back to the atmosphere at 100 kPa. (a) Draw the schematic and T-s diagrams. (b) Determine the thermal efficiency. (c) Determine the back work ratio of this power plant.

Answers

check all the photos

Explain the relationship between separation and economic efficiency in mineral processing.

Answers

Answer:

Post navigation. The technical excellence of separation achieved in a mineral concentration process, or any other process where two constituents of any kind are physically separated from each other, is expressed uniquely and quantitatively by the Separation Efficiency: Es = (R – Rg)

Explanation:

hope it helps.

Which of the following most accurately describes an institutional conflict of interest?

Answers

Answer:

Defined as a situation in which the financial investments or holdings of Stanford University or the personal financial interests or holdings of institutional leaders might affect or reasonably appear to affect institutional processes for the design, conduct, reporting, review, or oversight of human subjects research.

If the probability of a bit error is p, what is the probability of a single, double, and triple error in a 10-bit word? Express it in terms of p.

Answers

Answer:

single bit error: 10pdouble bit error: 45p²triple bit error: 120p³

Explanation:

The probability of n bits being in error is 10Cn × p^n, where ...

  10Cn = 10!/(n!(10-n!))

  10C1 = 10

  10C2 = 45

  10C3 = 120

This is the product of the probability that n bits can be in error and the number of ways that n bits can be chosen from the 10 in the word.

  n = 1: 10p

  n = 2: 45p²

  n = 3: 120p³

An ideal Otto cycle with air as the working fluid has a compression ratio of 8. The minimum and maximum temperatures in the cycle are 540 and 2400 R. Accounting for the variation of specific heats with temperature, determine (a) the amount of heat transferred to the air during the heat-addition process, (b) the thermal efficiency, and (c) the thermal efficiency of a Carnot cycle operating between the same temperature limits

Answers

Please check all the photos ( answer)

why a hard disk called a random access stroage device

Answers

RAM is called “random access” because any storage location on the computer can be accessed directly (as opposed to randomly).

Where you attend college could costmore to borrow and refinance loans

Answers

Ans: Researchers did the analysis on the average of the rates offered by Wells Fargo to determine monthly and total payments over the life of the loans. A community college borrower would pay $1,134.31 more on a $10,000 loan than a student with the same credit history at a four-year school.

Who is Mario and Luigi

Answers

Answer:

they are fictional characters featured in video games etc

Answer: Mario and Luigi are game characters, which feature in the Super Mario Maker series, the Paper Mario series, but most notably, the Super Mario Bros. series. Mario debuted in Donkey Kong (1981), while Luigi debuted in Mario Bros (1983, not to be confused with Super Mario Bros, which released two years after Mario Bros).


Escribe dos gemplos de los cambios de conducta que
adquiere el trabajador
al momento de capacitarse.

Answers

Aprendizajes del buen vivir ya que al compartir con la comunidad y te desarrollas, tu desarrollas otra manera de pensar y adquieres el aprendizaje del buen vivir con todos sin excepción alguna

Además el aprendizaje de experimentar compartir con otras personas que no son tu familia, eso hará que desarrolles el aprendizaje de tus cualidades y en este caso sería la cualidad de la imparcialidad

Alvaro designs machinery and equipment for ships. His job title is best described as . Jeanette draws maps and plans for freeway projects. Her job title is best described as . Joseph designs a new airport. His job title is best described as . Geraldine designs imaging systems that use light. Her job title is best described as .

Answers

Answer:

Alvaro designs machinery and equipment for ships. His job title is best described as Marine Engineer.

Jeanette draws maps and plans for freeway projects. Her job title is best described as Civil Drafter.

Joseph designs a new airport. His job title is best described as Transportation Engineer.

Geraldine designs imaging systems that use light. Her job title is best described as Photonics Engineer.

Hope this helps sorry I am late to respond, but anyone else who needs the answer it is here.

Based on the above, Alvaro is a Marine Engineer;

Jeanette is a Civil Drafter.Joseph is a Transportation Engineer.Geraldine  is a  Photonics Engineer.

What is machinery and equipment?

Machinery and Equipment are known to be a type of industrial tools, devices, and items that aids facilities.

Conclusively, They are said to be tangible personal property that are used as a tool for repair parts, etc. Professions in ship jobs includes, Marine Engineer, Photonics Engineer, etc.

Learn more about  machinery and equipment from

https://brainly.com/question/1203520

Project stem unit 0 lesson 5

Answers

Answer: Project STEM

Explanation: Develop a model to illustrate the role of photosynthesis and cellular respiration in the cycling of carbon among the biosphere

1. The reference OSHA standard requires several important characteristics of a PFAS:
It must limit the maximum arresting force imparted to the body to
with the full
body harness.

Answers

The reference OSHA standard requires several important characteristics of a PFAS. The employer must ensure that personal fall arrest systems (PFAs) must:

a. Limit the maximum arresting force on the employee to 1,800 pounds (8 kN). The figure used above must be based on the use of a full body harness.

Maximum arresting force is the highest amount of force that the fall protection system and the individual attached to the system will face as gotten by the deceleration device.

OSHA regulations gives the system performance criteria for a personal fall arrest system.

From the above, we can therefore say that The reference OSHA standard requires several important characteristics of personal fall arrest systems (PFAs) as employers must reduce the maximum arresting force on the employee to 1,800 pounds (8 kN) using full body harness.

Learn more

https://brainly.com/question/15049508

The use of seatbelts in a car has significantly reduced the number of crash fatalities. Which statement best explains how societal demand guided the development of the seatbelt technology

Answers

as the public need for preventing injuries and deaths from car crashes became known,laws were enacted to mandate the inclusion of seatbelts in almost all passengers vehicles

After turning off the television, you approach it. As you get close, but not touching it, the hairs on your arm start to stand up. This is an excellent example of static charge built up by_______

Answers

Friction because the static energy is a frict connection

For an electrical system, short dashed lines indicate?​

Answers

A solid line around a component indicates that the component is complete. A dashed line around the component indicates that the component is being shown is not complete.

In a pipe of diameter 350 mm and length 75m water is flowing at a velocity of 2.8 m/s. Find the head lost due to friction by using Darcy Weisbach equation?

Answers

Answer:

  1.71 m

Explanation:

The attachment shows the equation and values used in it. The Moody Friction Factor is not specified in this problem statement, so we have used the value provided by the calculator web site (0.02). The head loss is proportional to that factor, so it is not difficult to find the loss if your factor is different.

Tech a says both oem and tcmc brake pad kits come with new shims. Tech b says tcmc products have a 13 digit part number instead of the traditional 10 digits. Who is correct?

Answers

Both A and B are correct

A two-stage air compressor operates at steady state, compressing 10 m3 /min of air from 100 kPa, 300 K, to 1200 kPa. An intercooler between the two stages cools the air to 300 K at a constant pressure of 350 kPa. The compression processes are isentropic. Calculate the power required to run the compressor, in kW, and compare the result to the power required for isentropic compression from the same inlet state to the same final pressure.

Answers

check photos (answer)

Comparing this to the actual power required for the two-stage compressor (242.6 kW), we can see that the actual power required is significantly higher.

What is work done?

Work done is the amount of energy transferred to or from a system as a result of a force acting on it over a distance.

To solve this problem, we can use the following steps:

Step 1: Determine the state points of the air at various stages of the compression process.

Stage 1: Inlet state = State 1

P1 = 100 kPa, T1 = 300 K, V1 = 10 m³/min

Stage 2: After the first stage of compression = State 2

P2 = 1200 kPa, T2 = ? (isentropic compression)

Stage 3: After intercooling = State 3

P3 = 350 kPa, T3 = 300 K, V3 = V2

Stage 4: After the second stage of compression = State 4

P4 = 1200 kPa, T4 = ? (isentropic compression)

Step 2: Calculate the temperature and specific volume at states 2 and 4 using the isentropic compression process.

For an isentropic compression process, we have:

(P2/P1)^((γ-1)/γ) = T2/T1

(P4/P3)^((γ-1)/γ) = T4/T3

where γ is the ratio of specific heats for air, which is approximately 1.4.

Solving for T2 and T4, we get:

T2 = T1*(P2/P1)^((γ-1)/γ) = 300*(1200/100)^((1.4-1)/1.4) = 742.6 K

T4 = T3*(P4/P3)^((γ-1)/γ) = 300*(1200/350)^((1.4-1)/1.4) = 892.5 K

Next, we can use the ideal gas law to calculate the specific volume of air at states 2 and 4:

V2 = V1*(P1/P2)(T2/T1) = 10(100/1200)(742.6/300) = 0.1867 m³/kg

V4 = V3(P3/P4)(T4/T3) = 10(350/1200)*(892.5/300) = 0.2604 m³/kg

Step 3: Calculate the work done in each stage of the compressor.

For an isentropic compression process, the work done can be calculated using the following equation:

W = (mCp)(T2-T1) = (mCp)(T4-T3)

where m is the mass flow rate of air, which can be calculated using the specific volume and inlet volumetric flow rate:

m = V1/(v160) = 10/(0.831460) = 0.2016 kg/s

Cp is the specific heat at constant pressure for air, which is approximately 1.005 kJ/kg-K.

Thus, the work done in each stage of the compressor is:

W1 = (0.20161.005)(742.6-300) = 77.2 kW

W2 = (0.20161.005)(892.5-300) = 116.9 kW

The total work done by the compressor is:

W_total = W1 + W2 = 77.2 + 116.9 = 194.1 kW

Step 4: Calculate the power required to run the compressor.

The power required to run the compressor can be calculated using the following equation:

Power = W_total/η

where η is the compressor efficiency.

We are not given the efficiency, but for a two-stage compressor, a reasonable estimate for η is reasonable estimate for the efficiency of a two-stage compressor is around 75-85%. Therefore, we can assume η = 0.8.

Using this efficiency value, the power required to run the compressor is:

Power = W_total/η = 194.1/0.8 = 242.6 kW

Step 5: Compare the result to the power required for isentropic compression from the same inlet state to the same final pressure.

For isentropic compression from the same inlet state to the same final pressure, the work done can be calculated using the following equation:

W = (mCp)(T2-T1) = (mCp)(T4-T3) = (m*Cp)*ΔT

where ΔT = T2-T1 = T4-T3 = 442.5 K

Thus, the work done for isentropic compression is: W_iso = (0.2016*1.005)*442.5 = 89.1 kW

For more details regarding work done, visit:

https://brainly.com/question/13662169

#SPJ2

5. What is the biggest danger when using
electric drills?
O A. Using the wrong size bit for the hole
required can ruin the drill.
O B. The bit could get caught and throw the
user.
O C. The bit coming loose in the drill can
cause a loss of torque.
O D. Static electricity can build up and
deliver an electric shock to the user.

Answers

Answer:

Static electricity can build up and

deliver an electric shock to the user drilling with an electric drill or any drill can create static electricity but with electric drills the static electricity can react with the drills power supply creating a short circuit proceeding to shock you which is why electric drills have rubber grips around them to INSULATE the shock if It does happen (also that's why the drills mostly are made up of non conductive materials.)

what are the temperature ranges in which a piece of equipment is classified to work?

Answers

A gas can auto ignite when exposed to a temperature higher than its

autoignition temperature

Temperature ranges gives the maximum exposed surface temperature

allowable of a device that is to be used in a hazardous, atmosphere

To enable end users determine the suitability of a product for a particular

usage, an equipment is put through test in order to classify them according

to temperature of exposed (to the atmosphere) unprotected surface

Whereby the atmosphere is explosive, there is a temperature at which the

it can spontaneously ignite known as the autoignition temperature,

therefore,    it is important to use only equipment that belong to a temperature classification that is less than the auto ignition temperature of the location

The temperature classification can be presented as follows;

[tex]\begin{array}{|c|c|}Class&Surface \ Temperature \ ^{\circ }C\\T1&<450\\T2&<300\\T3&<200\\T4&<135 \\T5&<100\\T6&<85\end{array}[/tex]

The maximum allowable surface temperature of operation of a device

intended for use in an hazardous atmosphere is defined by the

temperature classification, which is also known as the T class

With knowledge of the gases present in the atmosphere, and the

autoignition temperature, accidents can be prevented

Learn more about operating temperature classification here:

https://brainly.com/question/18199083

The mechanical energy of an object is a combination of its potential energy and its

Answers

The mechanical energy of an object is a combination of its potential energy and its kinetic energy.

A house that was heated by electric resistance heaters consumed 1500 kWh of electric
energy in a winter month. If this house were heated instead by a heat pump that has an
average COP of 2.5, determine how much money the homeowner would have saved
that month. Assume a price of Tk 6/kWh for electricity.

Answers

Answer:

2.5=1500/Whp=> Whp=600 kWh

delWgain=1500-600=900 kWh

Money saved= 900* 6tk*=5400 tk

Calculate moments about points A,B,C,D

Answers

Answer:

24cm sureeeereereeeeee

Other Questions
Translate into an inequality A number w increased by 8 is at most -231) less than 2) greater than 3) less/equal to 4)greater/equal to 27- A woman steals a soldier's canteen. "This isn't a prison camp!" the womanshouted at him, before she drank out of it. Her tone in this passage can best be describedas one ofa) respectb) submissionc) reverenced) contempt Two people are eachpulling on the oppositeends of a rope. If theyare pulling on the ropewith equlbut oppositeforces what will happento the rope? What are some examples in history of of the destructive power of conformity Please Help!!! Evaluate the expression for the given values of the variables.(n + 5)2 for n = 7When n = 7, the expression is equal to. Marina can make 36 cupcakes in 45 minutes. how long will it take for her to make 108 cupcakes find the measures of the angles labeled in the figure on the right. What year was the first computer game introduced and what was it called? Which sub-unit makes up large molecules referred to aspolymers? whats the correct choice?bio Armand and Jill are 247.5 miles apart, and driving toward each other. Armand is driving at a rate of 50 miles per hour and Jill is driving at a rate of 60 miles per hour.A table showing Rate in miles per hour, Time in hours, and Distance in miles. The first row shows Armand, and has 50, t and 50 t. The second row shows Jill, and has 60, t, and 60 tUse the scenario and table to determine which statements are true. Check all that apply.Armand and Jill will each travel the same distance to meet.Armand and Jill will travel the same amount of time to meet.The equation used to find the time, t, it will take for them to meet is 50t + 60t = 247.5.It will take 4.5 hours for them to meet.Jill will travel 135 miles to meet Armand. Getting a job by Maya Angelou's Place the events in chronological order from beginning to end. PLEASE HELP! I NEED EXAMPLES! GIVING POINTS :)!Write 4-5 sentences about this image. does carbonation slow the rate of alcohol absorption? find the value of y. 7y + y - 2y =18 64 is what percent of 80? Tell me how you got it and i'll give brainliest? which of the following is not caused by the electromagnetic force?a light b gamma raysc gravity d radio waves equation for $.10 times 30 equals three dollars Add 12 + 7.options:195195 What is the slope of this line?343434