Answer:
Explanation:
The ocean is a huge body of salt water that covers about 71 percent of Earth’s surface. The planet has one global ocean, though oceanographers and the countries of the world have traditionally divided it into four distinct regions: the Pacific, Atlantic, Indian, and Arctic oceans. Beginning in the 20th century, some oceanographers labeled the seas around Antarctica the Southern Ocean, and in 2021 National Geographic officially recognized this fifth ocean.
An estimated 97 percent of the world’s water is found in the ocean. Because of this, the ocean has a considerable impact on weather, temperature, and the food supply of humans and other organisms. Despite its size and impact on the lives of every organism on Earth, the ocean remains a mystery. More than 80 percent of the ocean has never been mapped, explored, or even seen by humans. A far greater percentage of the surfaces of the moon and the planet Mars has been mapped and studied than of our own ocean floor.
Although there is much more to learn, oceanographers have already made some amazing discoveries. For example, we know that the ocean contains towering mountain ranges and deep canyons, known as trenches, just like those on land. The peak of the world’s tallest mountain—Mount Everest in the Himalayas, measuring 8.84 kilometers (5.49 miles) high—would not even break the surface of the water if it was placed in the Pacific Ocean’s Mariana Trench or Philippine Trench, two of the deepest parts of the ocean.
besides increasing the temperature, how might the rate of an aromatic bromination reaction be increased? by adding a lewis acid catalyst by placing the reaction in the dark by adding naoh by constantly stirring to keep the reaction well mixed
The rate of an aromatic bromination reaction can be increased by adding a Lewis acid catalyst. The correct option is 1. "by adding a lewis acid catalyst."
A Lewis acid catalyst is a substance that can increase the rate of a reaction without being consumed in the reaction. A Lewis acid catalyst can act as an electron acceptor and facilitate the formation of the intermediate species, which leads to the product faster than the uncatalyzed reaction.
Placing the reaction in the dark may not necessarily increase the rate of an aromatic bromination reaction. Adding NaOH can actually decrease the rate of the reaction as it can neutralize the acid that forms during the reaction. Constantly stirring to keep the reaction well-mixed can also help increase the rate of the reaction by bringing the reactants into contact with each other more frequently.
The complete question is:
Besides increasing the temperature, how might the rate of an aromatic bromination reaction be increased?
by adding a lewis acid catalyst by placing the reaction in the dark by adding NaOH by constantly stirring to keep the reaction well mixedLearn more about rate of the reaction here:
brainly.com/question/30546888
#SPJ11
an acid ha has a ka value of 4.40 x 10-4. 25.0 ml of 0.100 m ha is titrated with 0.25 m naoh. after the equivalence point is reached, 3 ml of 0.25 m naoh are added. what is the ph of the solution at this point?
At the equivalence point and after the addition of 3 mL of 0.25 M NaOH, the pH of the solution is approximately 4.36.
The first step in solving this problem is to determine the moles of acid (HA) present in the initial solution.
moles of HA = concentration of HA x volume of HA
moles of HA = 0.100 M x 0.0250 L
moles of HA = 0.00250 mol
Next, we need to determine the amount of NaOH needed to reach the equivalence point. Since we have a 1:1 stoichiometric ratio between HA and NaOH, the moles of NaOH required to reach the equivalence point will be equal to the moles of HA present.
moles of NaOH = 0.00250 mol
To calculate the volume of NaOH required to reach the equivalence point, we can use the equation;
moles of NaOH =concentration of NaOH x volume of NaOH
0.00250 mol = 0.25 M x volume of NaOH
volume of NaOH = 0.0100 L = 10.0 mL
This means that 10.0 mL of 0.25 M NaOH will be required to reach the equivalence point.
At the equivalence point, all of the HA has reacted with the NaOH to form the salt, sodium salt (NaA), and water. This means that the moles of NaOH added to reach the equivalence point will be equal to the moles of HA that have reacted;
moles of NaOH = 0.0100 L x 0.25 M = 0.00250 mol
moles of HA reacted = 0.00250 mol
The total volume of the solution at the equivalence point is:
volume of solution = volume of HA + volume of NaOH
volume of solution = 0.0250 L + 0.0100 L
volume of solution = 0.0350 L
The concentration of the resulting solution after the addition of 10 mL of 0.25 M NaOH is;
moles of NaOH added = 0.0100 L x 0.25 M = 0.00250 mol
moles of NaA formed = 0.00250 mol
moles of HA remaining = moles of HA - moles of HA reacted = 0.00250 mol
concentration of NaA = moles of NaA / volume of solution = 0.00250 mol / 0.0350 L = 0.0714 M
concentration of HA = moles of HA / volume of solution = 0.00250 mol / 0.0350 L = 0.0714 M
Since NaA is the conjugate base of the weak acid HA, the solution is a buffer. To calculate the pH of the buffer solution, we can use the Henderson-Hasselbalch equation;
pH = pKa + log([A⁻]/[HA])
where pKa is the acid dissociation constant of HA, [A⁻] is the concentration of the conjugate base (NaA), and [HA] is the concentration of the weak acid (HA).
The pKa of HA is given as 4.40 x 10⁻⁴, so we can substitute this value along with the concentrations of NaA and HA to get:
pH = -log(4.40 x 10⁻⁴) + log(0.0714/0.0714)
pH = 4.36
To know more about equivalence point here
https://brainly.com/question/4518249
#SPJ4
which of the following gives the definition of percent ionization of a weak acid? select the correct answer below: percent ionization is the equilibrium constant for the ionization of a weak acid. percent ionization is the ratio of the concentration of the undissociated acid at equilibrium to its initial concentration times 100%. percent ionization is the ratio of the concentration of the ionized acid at equilibrium to the initial acid concentration times 100%. none of the above
The correct answer is C, Percent ionization is the ratio of the concentration of the ionized acid at equilibrium to the initial acid concentration times 100%.
Ionization refers to the process by which an atom or molecule gains or loses one or more electrons, resulting in the formation of an ion. When an atom or molecule gains electrons, it becomes negatively charged and is called an anion, while losing electrons leads to a positively charged ion known as a cation.
Ionization can occur due to several reasons such as exposure to high-energy radiation or collision with other particles. It is a fundamental concept in understanding chemical reactions, particularly those involving acids and bases. For example, in an acid-base reaction, an acid donates a proton (H+) to a base, leading to the formation of a cation (H+) and an anion. Ionization also plays a critical role in numerous natural processes such as photosynthesis, atmospheric chemistry, and the behavior of metals in solution. I
To learn more about Ionization visit here:
brainly.com/question/28385102
#SPJ4
Complete Question:
which of the subsequent defines the percent ionization of a weak acid? pick the proper solution under:
A). percent ionization is the equilibrium regular for the ionization of a weak acid.
B). percent ionization is the ratio of the concentration of the undissociated acid at equilibrium to its initial awareness instances 100%.
C). percentage ionization is the ratio of the attention of the ionized acid at equilibrium to the initial acid attention times 100%.
D). not one of the above
The amount of energy needed to heat 4.3 g of a substance from 50.0°C to 80.0°C is 9.0 J. What is the specific heat capacity of this sample?
Answer:
c = 0.0635 J/g°C
Explanation:
We can use the formula for heat energy:
Q = m * c * ΔT
where Q is the heat energy absorbed by the substance, m is its mass, c is its specific heat capacity, and ΔT is the change in temperature. Rearranging the formula, we get:
c = Q / (m * ΔT)
Plugging in the given values, we get:
c = 9.0 J / (4.3 g * (80.0°C - 50.0°C))
c = 9.0 J / (4.3 g * 30.0°C)
c = 0.0635 J/g°C
Therefore, the specific heat capacity of the substance is 0.0635 J/g°C.
how many ml of 2.11 m hcl are required to react with 2.99 g of calcium? enter only the numeric value for your answer (no units).
By balancing the chemical equation it is deduced that we need 70.8 mL of 2.11 M HCl reacted with 2.99 g of calcium.
To solve this problem, we need to use the balanced chemical equation between calcium (Ca) and hydrochloric acid (HCl):
Ca + 2HCl → CaCl2 + H2
From the equation, we can see that 1 mole of calcium reacts with 2 moles of hydrochloric acid. To determine the number of moles of calcium, we divide the given mass by its molar mass:
2.99 g Ca / 40.08 g/mol = 0.0747 mol Ca
Since 1 mole of Ca reacts with 2 moles of HCl, we need twice as many moles of HCl to react completely with the given amount of Ca:
2 × 0.0747 mol HCl = 0.1494 mol HCl
Finally, we can calculate the volume of 2.11 M HCl solution needed to provide this amount of moles:
The volume of HCl = moles of HCl / Molarity of HCl
Volume of HCl = 0.1494 mol / 2.11 mol/L = 0.0708 L
We convert the volume to milliliters by multiplying by 1000:
0.0708 L × 1000 mL/L = 70.8 mL
Learn more about balanced chemical equations at
https://brainly.com/question/28294176
#SPJ4
if a titration of a different 10.0 ml sample requires 0.00500 moles of base, what mass of acetic acid is in the solution? (b) assuming the solution has a density of 1.0 g/ml, what is the mass % of acetic acid in the solution?
The mass of acetic acid in the solution is 0.30025 g. The mass percentage of acetic acid in the solution is 3.0025%.
(a) To find the mass of acetic acid in the solution, follow these steps:
Determine the moles of acetic acid:
Since 0.00500 moles of base were required for titration, it means that there are 0.00500 moles of acetic acid in the 10.0 ml sample (assuming a 1:1 reaction).
Calculate the mass of acetic acid:
Acetic acid (CH₃COOH) has a molecular weight of 12.01 (C) + 4.03 (4H) + 16.00 (2O) = 60.05 g/mol.
Multiply the moles of acetic acid by its molecular weight to find the mass is;
0.00500 moles × 60.05 g/mol = 0.30025 g.
So, the mass of acetic acid in the solution is 0.30025 g.
(b) To find the mass percentage of acetic acid in the solution, follow these steps:
Calculate the mass of the 10.0 ml solution:
Since the density is 1.0 g/ml, the mass of the solution is 10.0 ml × 1.0 g/ml = 10.0 g.
Calculate the mass percentage of acetic acid:
Divide the mass of acetic acid by the mass of the solution and multiply by 100:
(0.30025 g / 10.0 g) × 100 = 3.0025%.
So, the mass percentage of acetic acid in the solution is 3.0025%.
Learn more about mass percentage here;
brainly.com/question/30313524
#SPJ11
how does gas exchange in a fetus differ from a baby's gas exchange after birth? (2 points) in a fetus, gases diffuse across the alveoli; after birth, gases diffuse across the chorion. in a fetus, gases diffuse through the ductus venosus; after birth, gases diffuse across the alveoli. in a fetus, gases diffuse across the alveoli; after birth, gases diffuse through the ductus venosus. in a fetus, gases diffuse across the chorion; after birth, gases diffuse across the alveoli.
Baby's gas exchange differs from fetus gas exchange because fetus gas exchange propagates through the chorion and after birth, the gases diffuse into the alveoli. Therefore, option (d) is the correct answer here.
Fetal gas exchange: The placenta is responsible for gas exchange between mother and fetus. During pregnancy, it plays the role of the lungs, intestines and kidneys. The placenta has a chorion extension called chorionic villi, which contains small capillaries and is part of the internal organs of the body. These villi are washed in the mother's blood and gas exchange takes place in the placental region. Thus, the gas here diffuses along the chorion.
Gas exchange in babies after birth: During gas exchange, oxygen passes from the lungs to the blood. At the same time, carbon dioxide moves from the blood to the lungs. This happens in the alveoli of the lungs and is due to diffusion.The alveoli are surrounded by blood vessels, so oxygen and carbon dioxide diffuse between the air in the alveoli and the blood in the blood vessels. From the above discussion, we can say that both are differ by each other through option(d).
For more information about gas exchange , refer:
https://brainly.com/question/28152525
#SPJ4
Complete question:
how does gas exchange in a fetus differ from a baby's gas exchange after birth? (2 points)
a) in a fetus, gases diffuse across the alveoli; after birth, gases diffuse across the chorion.
b) in a fetus, gases diffuse through the ductus venosus; after birth, gases diffuse across the alveoli.
c) in a fetus, gases diffuse across the alveoli; after birth, gases diffuse through the ductus venosus. d) in a fetus, gases diffuse across the chorion; after birth, gases diffuse across the alveoli.
what product is formed when the following compound is treated first with lda in thf solution at low temperature, followed by ch3ch2i?
The product formed when the given compound is treated with LDA in THF solution at low temperature followed by CH3CH2I is the corresponding alkene (an elimination product).
The given response includes two stages: first, treatment with LDA (lithium diisopropylamide) in THF (tetrahydrofuran) arrangement at low temperature, and second, response with CH3CH2I. LDA is areas of strength for an and is many times utilized in natural science as a reagent for deprotonation responses. For this situation, it will extract a proton from the carbon neighboring the nitrogen iota, bringing about the development of an enolate middle of the road. This halfway is then gone after by the electrophilic CH3CH2I, prompting the end of a leaving bunch (normally LDA or THF) and the development of the comparing alkene. Generally, this response is an illustration of an end response and is usually utilized in natural combination to shape alkenes from proper beginning materials.
To learn more about LDA in THF solution, refer:
https://brainly.com/question/31326875
#SPJ4
why is it reasonable to set the chemical potential of a pure liquid or solid substance equal to its standard state chemical potential at that temperature independent of the pressure in considering chemical equilibrium
The chemical potential of a pure liquid or solid equal to its standard state chemical potential at a given temperature simplifies the analysis of chemical equilibrium and allows you to focus on temperature effects, as changes in pressure have minimal impact on the equilibrium position for these substances.
It is reasonable to set the chemical potential of a pure liquid or solid substance equal to its standard state chemical potential at a given temperature, independent of the pressure when considering chemical equilibrium for the following reasons:
1. Minimal volume change: In the case of pure liquids and solids, the volume change during a reaction is typically very small. As a result, changes in pressure have little effect on the equilibrium position.
2. Incompressibility: Both liquids and solids are relatively incompressible compared to gases. This means that their volumes do not change significantly with changes in pressure.
3. Constant chemical potential: When the volume change is negligible, the chemical potential of a pure liquid or solid substance can be considered constant and equal to its standard state chemical potential at that temperature. This simplifies calculations when analyzing chemical equilibrium.
4. Focus on temperature effects: By setting the chemical potential equal to its standard state chemical potential, you can more easily focus on the effect of temperature on the equilibrium position. The temperature often has a more significant impact on the position of equilibrium than pressure, especially for reactions involving liquids and solids.
to know more about chemical potential refer here:
https://brainly.com/question/31100203#
#SPJ11
which molecule, xanthophyll or beta-carotene, do you expect to move farther on the tlc plate using the conditions of this experiment?
Beta-carotene expects to move farther on the TLC plate than Xanthophyll because of their relative polarities. More polar molecules tend to have stronger interactions with the chromatography plate and move less far than less polar molecules.
In a plant pigment chromatography experiment, the movement of a molecule on the chromatography plate depends on several factors, including the polarity of the solvent, the polarity of the molecule, and the affinity of the molecule to the chromatography plate.
Both xanthophyll and beta-carotene are non-polar molecules that are insoluble in water but soluble in organic solvents such as acetone or petroleum ether. However, xanthophyll is generally more polar than beta-carotene due to the presence of polar hydroxyl (-OH) or carbonyl (C=O) functional groups.
Learn more about Beta-carotene, here:
https://brainly.com/question/29849994
#SPJ4
true or false when solving for x in a ka or kb expression the change in concentration x or x can only be ignored if the error is less than 5 of the concentration of acid or base
The given statement {when solving for x in a Ka or Kb expression, the change in concentration (x) can be ignored if the error is less than 5% of the concentration of the acid or base.} is True.
The statement is true. When solving for x in a Ka or Kb expression, the change in concentration (x) can only be ignored if the error is less than 5% of the concentration of acid or base. This is because a change in concentration beyond 5% can lead to significant errors in the calculated pH value, which can lead to inaccurate results. Therefore, any changes in concentration (x) must be carefully considered and evaluated to ensure accurate results are obtained. So the answer is true.
For more questions on: concentration
https://brainly.com/question/1062307
#SPJ11
(d) The student repeated the experiment using hydrochloric acid with a higher concentration.
Which statement is correct? Tick (✓) one box.
The activation energy for the reaction
was higher.
The magnesium reacted more quickly.
The reaction finished at the same time.
The total volume of gas collected was
smaller.
las offects the rate of the reaction
When the student repeated the experiment using hydrochloric acid with a higher concentration, the rate of the reaction between magnesium and hydrochloric acid increased.
This is because the higher concentration of hydrochloric acid provided more H+ ions, which increased the frequency of collisions between magnesium and the acid molecules, resulting in more successful collisions and a faster reaction rate.
The correct statement would be "The magnesium reacted more quickly". This is because the increase in acid concentration increases the reaction rate by increasing the number of collisions between the reactants.
Activation energy is a measure of the minimum energy required for a reaction to occur, and it is not affected by changes in the concentration of the reactants. The total volume of gas collected would not be smaller, as the amount of hydrogen gas produced is directly proportional to the amount of magnesium consumed and the reaction rate.
Therefore, the concentration of hydrochloric acid affects the rate of the reaction by increasing the frequency of successful collisions between the reactants.
To know more about hydrochloric acid, visit:
https://brainly.com/question/15231576
#SPJ1
You add a Mg pellet weighing 0.085 g to 7.52 mL of 3 M HCl contained in a foam calorimeter and measure a temperature change of 41.5 oC. What is delta Hrxn in kJ/mol ?
Answer: A 0.86 mol sample of a substance is burned in a bomb calorimeter with a heat capacity of 11.23 kJ/C. The temperature increases by 14.93 C. What is ΔHrxn (in kJ/mol) for the combustion of the substance? Note: please record answer to two decimal places regardless of sig figs
explain why molecules with larger mass (molecular weight) move faster in centrifugation but slower in electrophoresis.
In centrifugation and electrophoresis, molecules with larger mass behave differently due to the distinct principles behind these two techniques.
Centrifugation separates molecules based on their size, shape, and mass by applying a strong centrifugal force. Larger molecules with greater mass experience a higher centrifugal force, causing them to move toward the bottom of the tube at a faster rate. This is because the force acting on a molecule is proportional to its masses (Force = Mass × Acceleration). As a result, molecules with larger mass move faster in centrifugation.
On the other hand, electrophoresis separates molecules based on their size, shape, and charge in an electric field. In this technique, molecules move through a porous gel matrix. While smaller molecules can navigate through the pores more easily, larger molecules face greater resistance and move at a slower pace.
Additionally, the speed of a molecule in electrophoresis is also influenced by its charge-to-mass ratio. Molecules with a larger mass and the same charge as smaller molecules have a lower charge-to-mass ratio, making them move slower in the electric field.
In summary, molecules with larger mass move faster in centrifugation due to the greater centrifugal force they experience, while they move slower in electrophoresis because of the increased resistance and lower charge-to-mass ratio they possess.
Know more about electrophoresis here:
https://brainly.com/question/6885687
#SPJ11
the reaction between leadnitrate and aluminim chloride produces lead chloride and aluminim nitrate. find the mole ratios of lead nitrate to aluminim chloride and lead chloride to aluminum nitrate
The coefficients in the equation indicate that the mole ratio of lead chloride to aluminium nitrate is also 3:2.
The balanced chemical equation for the reaction between lead nitrate (Pb(NO3)2) and aluminium chloride (AlCl3) is:
3Pb(NO3)2 + 2AlCl3 → 3PbCl2 + 2Al(NO3)3
From the balanced equation, we can see that the mole ratio of lead nitrate to aluminium chloride is 3:2.
Similarly, the mole ratio of lead chloride to aluminium nitrate can be determined from the balanced equation. The coefficients in the equation indicate that the mole ratio of lead chloride to aluminium nitrate is also 3:2.
So, the mole ratio of lead nitrate to aluminium chloride is 3:2, which means that for every 3 moles of lead nitrate used in the reaction, 2 moles of aluminium chloride are required.
Likewise, the mole ratio of lead chloride to aluminium nitrate is also 3:2, which means that for every 3 moles of lead chloride produced in the reaction, 2 moles of aluminium nitrate are also produced.
It's worth noting that these mole ratios only apply to the specific reaction between lead nitrate and aluminium chloride, and may be different for other chemical reactions involving these compounds.
To know more about Mole ratio go through:-
https://brainly.com/question/19099163
#SPJ4
How many molecules of H2O can be produced from the reactants in the container below?
To determine the number of water molecules that can be produced from a given set of reactants, we need to know the chemical equation for the reaction and the amounts of each reactant present.
For example, if we have the reaction:
2H2 + O2 → 2H2O
This indicates that two molecules of the gas hydrogen (H2) and one molecule of the gas oxygen (O2) combine to form two molecules of water.
If we have 4 molecules of hydrogen gas and 2 molecules of oxygen gas present, then we have enough reactants to produce 4 molecules of water. However, if we have only 3 molecules of hydrogen gas and 2 molecules of oxygen gas present, then we have enough oxygen to react with only 2 molecules of hydrogen gas, producing 2 molecules of water and leaving one molecule of hydrogen gas unreacted.
So the number of water molecules that can be produced depends on the stoichiometry of the reaction and the amounts of reactants present.
For more questions on: produced
https://brainly.com/question/28807314
#SPJ11
A ball is dropped from 22m above the ground. Assuming gravity is −9.8ms2, what is its final velocity?
Answer:
We can use the kinematic equation that relates initial velocity, final velocity, acceleration, and displacement:
v^2 = u^2 + 2as
where
u = initial velocity (which is 0 in this case, since the ball is dropped)
v = final velocity (what we're trying to find)
a = acceleration due to gravity (-9.8 m/s^2)
s = displacement (which is the distance the ball falls, or 22 m)
Plugging in the given values, we get:
v^2 = 0 + 2(-9.8)(22)
v^2 = -431.2
Since we can't have a negative final velocity, we need to take the square root of both sides and include a negative sign to indicate that the final velocity is in the opposite direction of the initial velocity:
v = -sqrt(-431.2)
v ≈ -20.8 m/s
So the final velocity of the ball is approximately -20.8 m/s.
Answer:
The final velocity is -20.8 m/s.
Explanation:
To solve this problem, we can use one of the kinematics equations. Let's first write out which variables we know and what we are trying to figure out. (Note that acceleration due to gravity and Δy must have the same sign).
a = -9.8 m/s²
Δy = -22 m
v1 = 0
v2 = ?
Given these variables, we should use the following equation:
v2² = v1² + 2aΔy
Our next step is to substitute in the given variables and simplify.
v2² = (0) + (2)(-9.8 m/s²)(-22m)
v2² = 431.2
Our final step is to take the square root of both sides to find v2.
v2 = √431.2
v2 = -20.8 m/s
Therefore, the final velocity is -20.8 m/s. The velocity must be in the same direction as the displacement and the acceleration, so its sign should be negative.
For more information about similar physics problems with falling objects, check out these other questions on Brainly:
https://brainly.com/question/14251349
https://brainly.com/question/17107662
calculate the mass of scheelite that contains a million oxygen atoms. be sure your answer has a unit symbol if necessary, and round it to significant digits.
The mass of scheelite that contains a million oxygen atoms is 0.478 femtograms.
Scheelite is the calcium tungstate mineral, with the chemical formula CaWO₄. To calculate the mass of scheelite that contains a million oxygen atoms, we need to use the Avogadro's number to convert the number of atoms to the number of moles, and then use the molar mass of CaWO₄ to calculate the mass.
The molar mass of CaWO₄ can be calculated as follows;
Molar mass of CaWO₄ = (molar mass of Ca) + (molar mass of W) + 4 x (molar mass of O)
Molar mass of Ca = 40.08 g/mol
Molar mass of W = 183.84 g/mol
Molar mass of O = 16.00 g/mol
Molar mass of CaWO₄ = 40.08 g/mol + 183.84 g/mol + 4 x 16.00 g/mol
Molar mass of CaWO₄ = 287.94 g/mol
Now, we can use Avogadro's number to convert the number of oxygen atoms to moles;
1 mole of oxygen atoms = 6.022 x 10²³ oxygen atoms
1 million oxygen atoms = 1 x 10⁶ / 6.022 x 10²³ moles of oxygen atoms
1 million oxygen atoms = 1.661 x 10⁻¹⁸ moles of oxygen atoms
Since there is 1 oxygen atom in 1 molecule of CaWO₄, the number of moles of CaWO₄ is also 1.661 x 10⁻¹⁸ moles.
Finally, we can calculate the mass of CaWO₄ using its molar mass.
Mass of CaWO₄ = number of moles x molar mass
Mass of CaWO₄ = 1.661 x 10⁻¹⁸ moles x 287.94 g/mol
Mass of CaWO₄ = 4.78 x 10⁻¹⁶ g or 0.478 femtograms (fg)
Therefore, the mass of scheelite contains a million oxygen atoms is 0.478 femtograms.
To know more about Scheelite here
https://brainly.com/question/21123799
#SPJ4
what is the lewis acid in the following reaction? nh3 bf3 <---> nh3bf3 group of answer choices bf3 because it receives a lone pair. bf3 because it donates a lone pair. nh3 because it receives a lone pair. nh3 because it donates a lone pair.
The correct answer is option A) BF3 because it receives a lone pair. In this reaction, a Lewis acid-base reaction is taking place, in which a Lewis acid (electron pair acceptor) and a Lewis base (electron pair donor) are reacting to form a coordinate covalent bond.
BF3 serves as an electron pair acceptor and is the Lewis acid. This is due to the fact that BF3 has an open p-orbital that can receive a Lewis base's sole pair of electrons, such as NH3. Here, NH3 serves as an electron pair donor and is a Lewis base.
This is due to the fact that NH3 has a single pair of electrons that can be transferred to the vacant p-orbital in BF3.
This is crucial for forming the coordinating covalent bond that gives rise to the compound NH3BF3 between BF3 and NH3.
Complete Answer:
What is the Lewis acid in the following reaction? NH3 + BF3 <----> NH3BF3
Group of answer choices
A) BF3 because it receives a lone pair
B) BF3 because it donates a lone pair
C) NH3 because it receives a lone pair
D) NH3 because it donates a lone pair
To learn more about Lewis acid-base visit:
https://brainly.com/question/23433599
#SPJ4
As an object falls, how are kinetic and potential energy related? (1 point)
O Both potential energy and kinetic energy will increase equally as the object accelerates.
O The amount of potential energy and kinetic energy each will remain the same.
O These are different forms of energy that will increase or decrease independent of each othe
O Potential energy will decrease in an amount equal to the increase in kinetic energy.
As an object falls, its potential energy is converted into kinetic energy. This is because the object is being pulled down by gravity, which increases its velocity and therefore its kinetic energy.
At the same time, the object is losing height and therefore potential energy. The amount of potential energy lost will be equal to the amount of kinetic energy gained, so the sum of the two energies will remain constant.
In other words, the potential energy will decrease in an amount equal to the increase in kinetic energy. This is known as the conservation of energy principle, which states that energy cannot be created or destroyed, only converted from one form to another.
As the object falls, the potential energy it had due to its position in the Earth's gravitational field is transformed into kinetic energy due to its motion. This relationship between potential and kinetic energy is important in understanding the behavior of falling objects and other systems where energy is conserved.
To know more about kinetic energy, visit:
https://brainly.com/question/26472013
#SPJ1
lactic acid, hc3h5o3, has one acidic hydrogen. a 0.10m solution of lactic acid has a ph of 2.44. calculate ka
Given: The concentration of lactic acid: [C₃H₆O₃] = 0.1 M
The pH value of the solution: pH = 2.44
To calculate: Kₐ for lactic acid
The concentration of hydronium ions can be calculated by using the pH value.
[H₃O⁺] = 10⁻[tex]^{pH}[/tex]
= 10[tex]^{-2.44}[/tex]
= 0.00363 M
The ICE table for the dissociation of lactic acid is given:
Initial (M): C₃H₆O₃ + H₂O ⇄ C₃H₅O₃⁻ + H₃O⁺
Change (M): -x +x +x
Equilibrium (M): 0.1M - x x 0.00363 M
From the ICE table at the equilibrium condition
x = [H₃O⁺] = [C₃H₅O₃⁻] = 0.00363 M
[C₃H₅O₃⁻] = 0.1 M - x
= 0.1 M - 0.00363 M
0.09637 M
The expression for Kₐ = [H₃O⁺] [C₃H₅O₃⁻] / [C₃H₆O₃]
On substituting the corresponding values in the equation,
Kₐ = 0.00363 M × 0.00363 M / 0.09637 M
= 1.37 × 10⁻⁴
Hence the Kₐ for lactic acid is 1.37 × 10⁻⁴.
Learn more about Lactic acid, here:
https://brainly.com/question/22060383
#SPJ4
If a temperature system decreases in a chemical reaction, the resulting value for q from the specific heat equation is?
A. positive
B. negative
C. Constant
D. Not enough information to be determined
a 25.0 ml sample of a saturated c a ( o h ) 2 solution is titrated with 0.028 m h c l , and the equivalence point is reached after 38.1 ml of titrant are dispensed. based on this data, what is the concentration (m) of the hydroxide ion? type answer:
The concentration (M) of the hydroxide ion when 25ml of saturated Ca(OH)₂ is titrated with 0.028 ml of HCl is 0.054 M.
The concentration of the hydroxide ions can be calculated using the following formula:
[OH⁻] = ([tex]V_{B}[/tex] × [tex]M_{B}[/tex])/ ([tex]V_{S}[/tex] × n)
where [tex]V_{B}[/tex] is the volume of HCl used, [tex]M_{B}[/tex] is the molarity of HCl, [tex]V_{S}[/tex] is the volume of Ca(OH)₂ solution used and n is the number of OH⁻ ions per molecule of Ca(OH)₂ which is 2.
Here, [.] denotes the concentration of an entitled ion or molecule.
The concentration of a chemical species, specifically a solute in a solution, is measured by its molarity. It is described as the quantity of solute in one liter of solution, expressed in moles. The letter M stands for molarity.
After substituting the values provided in the question, we get:
[OH⁻] = (38.1 ml × 0.028 M) / (25 ml × 2)
[OH⁻] = 0.054 M
Therefore, the concentration of hydroxide ion in the saturated Ca(OH)2 solution is 0.054 M.
To know more about concentration of ions, refer:
https://brainly.com/question/21961599
#SPJ4
some reactions can be performed without a solvent. what are the benefits of not needing a solvent in a reaction? select one or more: the reaction often costs less because solvents can be expensive. less chemical waste is generated because there are not solvents to remove. reaction progress is easy to monitor because the reagents are more concentrated. the reaction rate is smaller because the concentration of reagents is greater.
Less chemical waste is generated because there are no solvents to remove. The reaction often costs less because solvents can be expensive.
The reaction rate is greater because the concentration of reagents is greater. These options are correct.
A solvent is a substance that dissolves a solute, producing a solution. In addition to being a liquid, a supercritical fluid, a solid, or a gas can also be solvent. All the ions and proteins in a cell are dissolved in water, which is a solvent for polar molecules and the most frequent solvent employed by living things.
chemical reaction, the transformation of one or more chemicals (the reactants) into one or more distinct compounds (the products). Chemical elements or chemical compounds make up substances. In a chemical reaction, the atoms that make up the reactants are rearranged to produce various products.
Learn more about Solvent here: brainly.com/question/30885015
#SPJ4
what is the ph of a solution made by mixing 10.00 ml of 0.10 m acetic acid with 10.00 ml of 0.10 m koh? assume that the volumes of the solutions are additive. ka
The pH of the solution made by mixing 10.00 mL of 0.10 M acetic acid with 10.00 mL of 0.10 M KOH is 4.74.
To calculate the pH of the solution, we need to first determine the concentration of the remaining species in solution after the neutralization reaction between acetic acid and KOH is complete.
The balanced chemical equation for the neutralization reaction is:
CH3COOH + KOH → CH3COOK + H2O
The concentration of the potassium acetate can be calculated from the stoichiometry of the reaction:
moles of potassium acetate = moles of acetic acid = moles of KOH
moles of acetic acid = 0.10 mol/L × 0.0100 L = 0.0010
mol
moles of KOH = 0.10 mol/L × 0.0100 L = 0.0010 mol
moles of potassium acetate = 0.0010 mol
The volume of the final solution is 20.00 mL, so the concentration of the potassium acetate is:
[CH3COOK] = moles of potassium acetate / volume of solution
= 0.0010 mol / 0.0200 L
= 0.050 mol/L
The dissociation of potassium acetate can be written as:
CH3COOK ⇌ CH3COO- + K+
The equilibrium constant for this reaction is given by the expression:
Ka = [CH3COO-][H+]/[CH3COOH
At equilibrium, the concentration of CH3COOH is zero, so we can simplify this expression to:
Ka = [CH3COO-][H+]/[CH3COOK]
We know the value of Ka for acetic acid, which is 1.8 x
[tex] {10}^{ - 5} [/tex]
We can use this value to solve for the concentration of H+ in the solution:
1.8 x
[tex] {10}^{ - 5} [/tex]
= [H+][CH3COO-] / [CH3COOK]
To convert the concentration of H+ to pH, we use the expression:
pH = -log[H+]
= 4.74
learn more about pH here:
https://brainly.com/question/26856926
#SPJ4
if nacl is soluble in water to the extent 36.0 g nacl/100 g h2o at 20 oc, then a solution at 20 oc containing 45 g nacl/160 g h2o would be
Then the solution is supersaturated.
As per the question, if NaCl is soluble in water to the extent 36.0 g NaCl/100 g H2O at 20 °C, then a solution at 20°C containing 45 g NaCl/160 g H2O would be:
Supersaturated at 20°C
Explanation:
A solution is considered to be supersaturated if it contains more solute than what can dissolve in it at a particular temperature. It is, therefore, an unstable solution, and if any disturbance is provided, the excess solute starts to form crystals or precipitate. Thus, such a solution is capable of further dissolving the solute.
Suppose a solution of NaCl is considered, which is soluble in water to the extent of 36.0 g NaCl/100 g H2O at 20°C. This information helps in determining the solubility of NaCl at 20°C, which is 36.0 g NaCl/100 g H2O.Now, consider another solution that contains 45 g NaCl/160 g H2O at 20°C.
For determining whether the solution is saturated, unsaturated or supersaturated, compare the solubility of NaCl at 20°C to the given concentration of NaCl in the solution.The solubility of NaCl is 36.0 g NaCl/100 g H2O at 20°C, whereas the given concentration of NaCl in the solution is 45 g NaCl/160 g H2O. This concentration is higher than the solubility of NaCl.
for more questions on supersaturated :
https://brainly.com/question/24286391
#SPJ11
you need to make a ph 6.5 buffer. which of the following reagents would you choose to make the buffer? explain. pka1, pka2, and pka3 of h3a are 2.44, 6.27, and 9.82, respectively. na3a na2ha nah2a h3a 6. a buffer is made by combining 20.0 ml 0.250 m nh4cl with 30.0 ml 0.250 m nh3. a. calculate the ph of the buffer.
To make a pH 6.5 buffer, we need to choose a weak acid and its conjugate base with a pKa value close to 6.5. Looking at the given pKa values of H3A, we see that pKa2 is the closest to 6.5. Therefore, we should choose the conjugate acid-base pair Na2HA/NaHA.
To prepare the buffer, we would add a solution of Na2HA and NaOH to water and adjust the pH to 6.5 using a pH meter or pH indicator. The resulting solution will be a buffer with a pH of 6.5.
Now, let's move on to the second part of the question:
We are given 20.0 mL of 0.250 M NH4Cl and 30.0 mL of 0.250 M NH3 to prepare a buffer. The relevant equilibrium involved in this buffer is:
NH4+ + NH3 ⇌ NH3 + H+
From the given information, we can find the initial concentrations of NH4+ and NH3 in the buffer solution as:
[NH4+] = (0.250 mol/L) x (20.0 mL/1000 mL) = 0.0050 M
[NH3] = (0.250 mol/L) x (30.0 mL/1000 mL) = 0.0075 M
The equilibrium concentration of NH3 and H+ can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([NH3]/[NH4+])
Substituting the given values:
pH = 9.25 + log(0.0075/0.0050) = 9.25 + 0.18 = 9.43
Therefore, the pH of the buffer is approximately 9.43.
To learn more about conjugate base visit;
https://brainly.com/question/30225100
#SPJ4
If 17.88 g of nitrogen trihydride reacts with 11.9 g of diatomic oxygen, how many molecules of water may be produced?
Which of the following is/are true about electrolytes?
a 3.02 mol 3.02 mol sample of kr kr has a volume of 417 ml. 417 ml. how many moles of kr kr are in a 5.62 l 5.62 l sample at the same temperature and pressure?
Sample 1 has 0.00724 mol/L of Kr, while sample 2 has 0.0406 mol of Kr.Therefore, the 5.62 L sample contains 0.0406 moles of Kr.
The given data gives the molar grouping of krypton in the underlying example. The molarity can be determined utilizing the equation, Molarity = number of moles of solute/volume of arrangement in liters. Utilizing this recipe, we get the molarity of the underlying example as 7.24 M.
Presently, we can utilize the molarity and volume of the second example to ascertain the quantity of moles of krypton in it utilizing the equation, number of moles of solute = molarity x volume of arrangement in liters. Subbing the given qualities in the recipe, we get the quantity of moles of krypton in the second example as 36.2 mol.Subsequently, there are 36.2 moles of krypton in a 5.62 L example at a similar temperature and strain as the underlying example.
To learn more temperature and pressure, refer:
https://brainly.com/question/19524022
#SPJ4