Answer:
Because, it would make the pan hot and if it's plastic then it would melt. if it was metal it might make the metal piece hot and you'd risk burning yourself.
Explanation:
You should never place a hot object on the pan of a balance because it can cause the balance to become inaccurate and affect the measurement results.
Balances are precision instruments used to measure the mass of objects with high accuracy. The balance pan and its components are designed to operate under specific conditions, including a stable temperature. When you place a hot object on the balance pan, several issues can arise:
Thermal Expansion: Materials, including metals and plastics, can expand when exposed to heat. Placing a hot object on the pan can cause the pan and its supporting components to expand, potentially affecting the balance's calibration and accuracy.
Uneven Heating: If the hot object is not uniformly heated, it can cause uneven expansion of the balance pan. This can lead to imbalanced weight distribution and inaccurate measurements.
Calibration Shift: The heat from the hot object can cause the materials in the balance to change temperature rapidly, potentially affecting the calibration of the instrument. The balance may require time to stabilize before accurate measurements can be obtained.
Damage to the Balance: Exposing the balance pan to extreme heat can cause warping, cracking, or other structural damage to the pan material. This can permanently impair the balance's performance and accuracy.
To ensure accurate measurements and maintain the integrity of the balance, it's important to allow hot objects to cool to room temperature before placing them on the balance pan. Additionally, using appropriate containers or holders designed for high-temperature applications can help prevent damage to both the hot object and the balance equipment.
To learn more about Weighing balance, here
https://brainly.com/question/33716206
#SPJ3
An ion has 56 protons, 54 electrons, and 81 neutrons. What is its atomic #?
Answer:
110.91982
The element is probably Barium
The atomic number of an atom is equal to the number of protons it has. In this case, the ion has 56 protons. Therefore, the atomic number of the ion is 56.
The atomic number or nuclear charge number (symbol Z) of a chemical element is the charge number of an atomic nucleus. For ordinary nuclei composed of protons and neutrons, this is equal to the proton number (np) or the number of protons found in the nucleus of every atom of that element. The atomic number can be used to uniquely identify ordinary chemical elements. In an ordinary uncharged atom, the atomic number is also equal to the number of electrons.
For an ordinary atom which contains protons, neutrons and electrons, the sum of the atomic number Z and the neutron number N gives the atom's atomic mass number A. As there are 56 protons thus the atomic number of the ion is 56.
Learn more about atomic number,here:
https://brainly.com/question/16858932
#SPJ3
The atoms of which elements tend to gain electrons? Which tend to lose electrons?
A.Metals tend to lose electrons; nonmetals tend to gain electrons.
B.Metals tend to gain electrons; nonmetals tend to lose electrons.
C.Most metals and nonmetals tend to lose electrons; metalloids tend to gain
electrons.
D.Metals and most nonmetals tend to lose electrons; noble gases tend to gain
electrons.
Answer:
Nonmetals tend to gain electrons and metals tend to lose electrons.
Explanation:
bnmmmmmmmxsdcwwegvwwfdvsdv
Answer:
bnmmmmmmmxsdcwwegvwwfdvsdv
1.The chemical or substance used to start a reaction are called
Answer:
Reactants
Explanation:
The substance (or substances) initially involved in a chemical reaction are called reactants or reagents.
Answer:
The substance (or substances) initially involved in a chemical reaction are called reactants or reagents. ... Chemical reactions are described with chemical equations, which symbolically present the starting materials, end products, and sometimes intermediate products and reaction conditions.
Explanation:
Hope this helps...
Describe the endogenous pathways of cholesterol metabolism.
Explanation:
Endogenous pathway for lipid metabolism: VLDL is formed in the liver from triglycerides and cholesterol esters. ... In the liver, LDL is converted into bile acids and secreted into the intestines. In non hepatic tissues, LDL is used in hormone production, cell membrane synthesis, or stored.
Can someone help me with this
Answer: It would be malleable, solids, luster, conductors, reactive
Explanation:
Who discovered the proton?
Crookes
Rutherford
Balten
Chadwick
Answer:
Sir James Chadwick discovered proton
Explanation:
Sir James Chadwick, was a British physicist who was awarded the 1935 Nobel Prize in Physics for his discovery of the neutron in 1932. In 1941, he wrote the final draft of the MAUD Report, which inspired the U.S. government to begin serious atomic bomb research efforts.
1. What is the name of the metal which exists in liquid state at room temperature?
(a) Sodium
(b) Potassium
(c) Mercury
(d) Bromine
2. Heterogeneous mixture in which the solute particles do not dissolve and remain suspended throughout the solvent and the solute particles can be seen with the naked eye is known as:
(a) Colloidal solution
(b) Solution
(c) Suspensions
(d) both (b) and (c)
3. In tincture of iodine, find the solute and solvent?
(a) alcohol is the solute and iodine is the solvent
(b) iodine is the solute and alcohol is the solvent
(c) any component can be considered as solute or solvent
(d) tincture of iodine is not a solution
4. A pure substance which is made up of only one kind of atom and cannot be broken into two or more simpler substances by physical or chemical means is referred to as ?
(a) a compound
(b) an element
(c) a molecule
(d) a mixture
Answer:
1. mercury.
2. suspensions.
3.iodine is the solute and alcohol is the solvent.
4. A element.
the half-life of roentgenium -281 is 17 seconds,if 10 grams are left after 85 seconds,how many grams were initially in the original sample?
Calculate the volume of a clear liquid that has a mass of 20 g and a density of 15.77 g/mL.
Answer:
20 g g/mL. 15.77
Explanation:
i think i answer it
How many Joules of energy are needed melt 40.0 g of ice?
answer: 334 J
explain: A total of 334 J of energy are required to melt 1 g of ice at 0°C, which is called the latent heat of melting.
Elzmall.org Bookmark
revious
9v
Next
Pretest: Chemical Reactions
Submit Test
& Ri
9
Select the correct answer.
Which coefficient of O, is needed to balance the equation C3Hg+ 02 - 3C02 + 4H2O?
OA. 2
OB. 3
O c. 5
OD 6
Reset
Next
The coefficient of oxygen is five which is needed to balance the given chemical equation and equation is C₃H₈ +5 O₂[tex]\rightarrow[/tex] 3 CO₂ +4 H₂O.
Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
Learn more about chemical equation,here:
https://brainly.com/question/30087623
#SPJ7
Someone pls help me I will mark you as brain
Answer:
Chlorination
Explanation:
"Exposure to high volumes of chlorine gas fumes can cause serious health problems, including death."
https://water.mecc.edu/courses/ENV211/lesson14_print.htm
:)
Use metric and U.S. conversion factors to solve the problem.
Question - If a student is 175 cm tall, how tall is the student in meters?
Explanation:
100cm = 1m
1cm=1/100 m
175cm = 175/100 m = 1.75m.
hope this helps you.
If a student is 175 cm tall, then according to the metric system the same student is 1.75 m tall.
What is a Metric system?A metric system may be defined as a type of system that significantly weighs and measures the mass and distance respectively in which the meter is the unit of length and the kilogram is the unit of weight.
A metric system is a standard system of measurement which utilizes the meter, liter, and gram as base units of length for distance, capacity for volume, weight for mass, etc.
According to the question, the height of a student in cm = 175 cm.
Then, from the general conversion rule,
1 meter = 100 cm.
1 cm = 1/100 meter.
175 cm. = 175/100 = 1.75 meters.
Therefore, if a student is 175 cm tall, then according to the metric system the same student is 1.75 m tall.
To learn more about the Metric system, refer to the link:
https://brainly.com/question/1837503
#SPJ2
Determine mass contribution for the following isotopes of the same element.
At the end, tell me the atomic mass of the element using the mass contributions.
Do not forget your units or the question will be marked incorrect.
Isotope 2 amu: 186.956
percent abundance: 62.6%
Atomic Mass of the element ?
Answer: Not possible to find average amu with only the information provided.
Explanation:
Is there more information about the other isotopes? I don't see how one could calculate an overall atomic mass with only one isotope is known. An isotope of 186.956 with abundance of 62.6% isn't enough information. We're not told anything about the other isotopes: are they larger, smaller, and at what percentage. If one has an amu of 204.956 at 37.4%, the overall atomic mass would be quite different than if it had an atomic mass of 182.956 at 37.4%. More infornmation is required.
as you move to the right across the periodic table, beginning with group 16, non-metals…
a) lose more electrons
b) gain or share fewer electrons
c) gain or share more electrons
What is the weighted average of lemonas if 80% are the GX model (4,000 lbs) and 20% are
the GXL model (5,000 lbs)?
Answer:
4200
Explanation:
4,000 * .8 + 5,000 * .2
The weighted average of lemonas with 80% GX model and 20 % GXL model is calculated using their mass percent and it is 4200.
What is weighted average?
The weighted average is different from the normal average we use in maths. Let's X and Y be two number and their average be x+ y/2. That is the arithmetic mean.
The weighted average of lemonas is similar to the atomic weight of an element calculated from ist two isotopes where, the percentage abundance in earth and the mass of isotopes if given the weighted average is calculated as follows:
weighted average = % abundance / 100 × mass of isotope 1 + % abundance / 100 × mass of isotope 2
In a similar way, the weighted average of lemonas of GX and GXL model is calculated as follows:
weighted average = ( 4000 lbs ×80/100 ) + ( 5000 lbs ×20/100)
= 4200 lbs.
Hence, the weighted average of lemonas if 80% are the GX model (4,000 lbs) and 20% are the GXL model is 4200 lbs.
To find more about weighted average, refer the link below:
https://brainly.com/question/28042295
#SPJ2
Read the article by Michael Fumento, writer for the New York Post editorial blog, who does not support global warming.
Back in 2005 I and others reviewed the entire hurricane record, which goes back over a century, and found no increase of any kind. Yes, we sometimes get bad storms—but no frequently now than in the past. The advocates simply ignored that evidence.
Fact is, the earth was cooling and warming long before greenhouse gases could have been a factor. The [global warming supporters] have been proved wrong time and time again.
Which best describes the reliability of the source?
Nationally certified organizations are considered an unreliable source because the public can access their information.
Charities are considered a reliable source because the public makes financial contributions to them.
Editorial blogs are considered an unreliable source because the author may not have a science background.
Editorial blogs are considered a reliable source because authors contribute to them regularly.
The editorial blogs are considered an unreliable source because the author may not have a science background. Option C
What the reliability of a source?We know that not all sources of information could be taken to be reliable. A source of information could come across as being reliable when the source is an authority in the area in which the information is furnished.
Such authorities often publish authentic and verified information in reputable journal that are meant for professional consumption.
Thus, the editorial blogs are considered an unreliable source because the author may not have a science background.
Learn more about editorial blogs:https://brainly.com/question/9063649
#SPJ1
Select the reactants of photosynthesis
NEED ANSWER ASAP
Concerning chromatography, why do different colors in the ink separate?
A)Some colors had a greater repulsion for the paper or water. The colors that had a greater repulsion for the paper moved faster, and those with a greater repulsion for the water moved slowly up the paper.
B)Some colors had a greater affinity for the paper or water. The colors that had a greater affinity for the water moved faster, and those with a greater affinity for the paper moved slowly up the paper.
C)Some colors had a greater repulsion for the paper or water. The colors that had a greater repulsion for the water moved faster, and those with a greater repulsion for the paper moved slowly up the paper.
D)Some colors had a greater repulsion for the paper or air. The colors that had a greater affinity for the air moved faster, and those with a greater affinity for the paper moved slowly up the paper.
E)Some colors had a greater affinity for the paper or water. The colors that had a greater affinity for the paper moved faster, and those with a greater affinity for the water moved slowly.
Substances that have greater affinity for the solvent travel faster while the substance that have greater affinity for the paper travel more slowly.
Chromatography involves a mobile phase and a stationary phase. The mobile phase is the solvent that carries the mixture. while the stationary phase is the medium that performs the actual separation
The speed with which components of the ink moves up the paper depends on its affinity for the paper or the water.
The different colors in the ink separate because some colors had a greater affinity for the paper or water. The colors that had a greater affinity for the water moved faster, and those with a greater affinity for the paper moved slowly up the paper.
Learn more: https://brainly.com/question/19334271
How do two hydrogen atoms bond to form a molecule?
1 each hydrogen atom shares an electron to form a covalent bond
2 each hydrogen atom transfers an electron to form an ionic bond
Answer:
1: each hydrogen atom shares an electron to form a covalent bond
Explanation:
I took the quiz and this was correct!
True or false chemistry. No links.
This is my almost last question plsss help
Answer:
The Government did not encourage Confucius' philosophy until more than 350 years after Confucius first began teaching.
and
Some kinds of Confucianism we're influenced by other philosophies.
Particle A has very little mass in comparison to Particle B. Both particles are in the same atom. Which is the best conclusion about Particles A and B?
A) They have the same charge.
B) They are located in the nucleus together.
C) Particle A has a positive charge, and Particle B is neutral.
D) Particle A orbits the nucleus, and Particle B is located in the nucleus.
Answer:
A) They have the same charge.
B) They are located in the nucleus together.
C) Particle A has a positive charge, and Particle B is neutral.
D) Particle A orbits the nucleus, and Particle B is located in the nucleus.
Explanation:
solar powered cars use energy use energy form the sun to work. a panel on the car absorbs light energy from the sun, which then generates a electric current. this electric current, in turn allows this car to move. which shows the correct order of energy transformations that take place in a solar-powered car? A. electrical, chemical, kinetic B. electrical, kinetic, radiant C. radiant, chemical, electrical D. radiant, electrical, mechanical. i will brainliest to fastest answer
Answer:
The answer is
D)
radiant, electrical, mechanical
Explanation:
during a chemical reaction when the products of that reaction require less potential energy describe what happens to the surroundings?
in the reaction of aluminum metal and oxygen gas to make aluminum oxide, how many moles of aluminum will react with 0.80 grams o2?
Explanation:
When 6.38 moles of O2 and 9.15 moles of Al react, the ratio of aluminum to oxygen is 9.15/6.38 = 1.434. This shows that all of the oxygen is consumed before the aluminum and when the reaction ends the reactant aluminum is left. The number of moles of Al2O3 formed is approximately 4.25 moles.
Example The anticancer druge cir-platin hydrolysis in with constant 1. Solo - at pH 7:0 and 25°c. calculate the half life of the reaction
Answer:
ganda no beeeeeèeeeeee
The reaction between sodium and water releases a lot of energy to the
surroundings. What type of process is this?
Answer:
an exothermic reaction i think
Explanation:
A container holds 0.500 qt if liquid. how many mL of lemonade will it hold