You have a flattened plastic bag. What can you do to expand the bag? Explain using variables such as number of particles,temperature/speed of particles, pressure/number of collisions, volume/space.


Topic: Gas law scenarios

The amount of heat released by the production of 1.0 mole of SO3(g) is 196 kJ.

To determine the amount of heat released by the production of 1.0 mole of SO3(g), we need to first balance the chemical equation:

2SO2(g) + O2(g) = 2SO3(g) + 392 kJ

Now, we can see that 2 moles of SO3 are produced by releasing 392 kJ of heat. To find the heat released for 1 mole of SO3, we can set up a proportion:

(392 kJ) / (2 moles of SO3) = x kJ / (1 mole of SO3)

Solving for x:

x = (1 mole of SO3) * (392 kJ) / (2 moles of SO3)
x = 196 kJ

So, the amount of heat released by the production of 1.0 mole of SO3(g) is 196 kJ.

To learn more about heat, refer below:

https://brainly.com/question/1429452

#SPJ11

Answer:

Ksp = [tex]3.2*10^{-5}[/tex]

Explanation:

If 0.020 M of Ca(OH)2 dissociates, then we can follow the Ksp formula.

Ksp = [tex][A]^{a} [B]^{b}[/tex]     Eq.1

[tex]Ca(OH)2 -- > Ca^{2+} (aq) + 2 OH^{-} (aq)[/tex]      Eq.2

[tex]0.02M Ca(OH)2 -- > 0.02 M Ca^{2+} + 2*0.02 M OH^{-}[/tex]

Here, Ca is our A and since it has a coefficient of 1, a = 1

OH is our B. The concentration is doubled because there are 2 moles of OH per mole of Ca(OH)2. Due to this it also has a coefficient of two (Eq.2), making b = 2.

Ksp = [tex][0.02][0.02*2]^{2}[/tex]

Ksp = 0.000032

Ksp = [tex]3.2*10^{-5}[/tex]

a) To determine the number of grams of I2 needed to react with 36.7 g of N2H4, we need to use stoichiometry.

The balanced equation for the reaction is:

2I2 + N2H4 → 4HI + N2

From the equation, we can see that 2 moles of I2 react with 1 mole of N2H4 to produce 4 moles of HI. So, the mole ratio of I2 to N2H4 is 2:1.

First, we need to determine the number of moles of N2H4 in 36.7 g:

moles of N2H4 = mass / molar mass

moles of N2H4 = 36.7 g / 32.045 g/mol

moles of N2H4 = 1.146 mol

Since the mole ratio of I2 to N2H4 is 2:1, we need half as many moles of I2 as there are moles of N2H4:

moles of I2 = 1.146 mol / 2

moles of I2 = 0.573 mol

Finally, we can calculate the number of grams of I2 needed:

mass of I2 = moles of I2 x molar mass of I2

mass of I2 = 0.573 mol x 253.81 g/mol

mass of I2 = 145.5 g

Therefore, 145.5 grams of I2 are needed to react with 36.7 grams of N2H4.

b) To determine the number of grams of HI produced from the reaction of 115.7 g of N2H4 with excess iodine, we need to use stoichiometry again.

The balanced equation for the reaction is:

2I2 + N2H4 → 4HI + N2

From the equation, we can see that 2 moles of I2 react with 1 mole of N2H4 to produce 4 moles of HI. So, the mole ratio of HI to N2H4 is 4:1.

First, we need to determine the number of moles of N2H4 in 115.7 g:

moles of N2H4 = mass / molar mass

moles of N2H4 = 115.7 g / 32.045 g/mol

moles of N2H4 = 3.609 mol

Since the mole ratio of HI to N2H4 is 4:1, we can calculate the number of moles of HI produced:

moles of HI = 4 x moles of N2H4

moles of HI = 4 x 3.609 mol

moles of HI = 14.436 mol

Finally, we can calculate the number of grams of HI produced:

mass of HI = moles of HI x molar mass of HI

mass of HI = 14.436 mol x 127.91 g/mol

mass of HI = 1846.5 g

Therefore, 1846.5 grams of HI are produced from the reaction of 115.7 grams of N2H4 with excess iodine.

To know more about react refer here

https://brainly.com/question/14168723#

#SPJ11

A 0.625 g sample of unknown weak acid is titrated with 0.1 M NaOH. So, the molecular mass of the unknown acid is 139.0 g/mol. The pKa of the unknown acid is 8.25.

Here are the step by step solutions for the given question:

(a) To determine the molecular mass of the unknown acid, we need to first find the number of moles of NaOH used in the titration. From the concentration and volume of NaOH used, we have:

0.100 mol/L x 0.045 L = 0.0045 mol NaOH

Since the acid and base react in a 1:1 ratio, we know that the number of moles of acid in the sample is also 0.0045 mol. Using the mass of the sample and the number of moles of acid, we can find the molecular mass:

Molecular mass = mass/number of moles = 0.625 g / 0.0045 mol = 139.0 g/mol

Therefore, the molecular mass of the unknown acid is 139.0 g/mol.

(b) At the equivalence point, the number of moles of NaOH added is equal to the number of moles of acid originally present in the sample. Therefore, we can use the concentration of the NaOH solution and the volume of NaOH used to calculate the initial concentration of the acid, [HA]:

0.100 mol/L x 0.045 L = 0.0045 mol NaOH

0.0045 mol NaOH = 0.0045 mol HA

[HA] = 0.0045 mol / 0.025 L = 0.18 mol/L

Next, we can use the Henderson-Hasselbalch equation to find the pKa of the acid:

pKa = pH + log([A-]/[HA])

At the equivalence point, all of the acid has been converted to its conjugate base, so [A-] = [HA]. We can assume that the pH at the equivalence point is equal to the pKa of the acid. Substituting these values into the Henderson-Hasselbalch equation:

8.25 = pKa + log(1)

pKa = 8.25

Therefore, the pKa of the unknown acid is 8.25.

To know more about the equivalence point refer here :

https://brainly.com/question/31671460#

#SPJ11

The evaluated molecular weight  is 40 amu, under the condition that 3. 01 x 10²³ molecules of the compound A2B is present.

The molecular weight of A2B can be evaluated using the following formula
Molecular weight = (2 × atomic mass of A) + (1 × atomic mass of B)
For the given question 3. 01 x 10²³molecules of A2B has a mass of 9.0 grams, we can evaluate the molecular weight as follows

The molar mass of A2B = (9.0 g / 3.01 x 10²³ molecules) = 2.99 x 10⁻²³ g/molecule
The atomic mass of A = 10 amu
The atomic mass of B = 20 amu
Molecular weight = (2 × atomic mass of A) + (1 × atomic mass of B) = (2 × 10 amu) + (1 × 20 amu)
= 40 amu

Hence, the molecular weight of A2B is 40 amu.

To learn more about molecular weight
https://brainly.com/question/14596840
#SPJ4

Isopropyl alcohol (IPA) is an effective disinfectant when used in the appropriate concentration.

The Centers for Disease Control and Prevention (CDC) recommends using solutions with at least 70% IPA for disinfecting surfaces against COVID-19.

Higher concentrations (e.g., 90-99%) of isopropyl alcohol may evaporate too quickly to be effective, while lower concentrations (e.g., 50%) may not be strong enough to kill certain types of germs.

It is also important to follow proper application procedures and allow sufficient contact time for the disinfectant to work effectively.

To know more about Isopropyl alcohol refer to-

https://brainly.com/question/14896958

#SPJ11

To calculate the pressure of methane gas at 60 degrees Celsius, we can use the ideal gas law equation:

P1/T1 = P2/T2

Where P1 denotes the starting pressure, T1 the starting temperature, P2 the desired final pressure, and T2 the desired final temperature.

We'll need to convert the temperatures to Kelvin, as the ideal gas law equation requires temperature in Kelvin.

Initial temperature (T1) = 76 + 273.15 = 349.15 K
Final temperature (T2) = 60 + 273.15 = 333.15 K

We can now enter the values we have:

102650/349.15 = P2/333.15

Solving for P2:

P2 = (102650 * 333.15)/349.15

P2 = 98,066.86 Pascal's

Therefore, the pressure of methane gas at 60 degrees Celsius when the initial pressure was 102650 Pascal's at 76 degrees Celsius, with constant volume and fixed amount of gas, is 98,066.86 Pascal's.

What do you mean by Ideal gas law?

The behaviour of an Ideal gas is described by the Ideal gas law, a key equation in thermodynamics. PV = nRT is the formula for this equation, where P is the gas's pressure, V is its volume, n is the number of moles, R is the global gas constant, and T is the gas's absolute temperature.

The Ideal gas law assumes that the gas is composed of a large number of small particles that are in constant random motion and that there are no intermolecular forces between the particles. It also assumes that the volume of the gas molecules is negligible compared to the volume of the container in which the gas is held.

The Ideal gas law can be used to determine the pressure, volume, temperature, or number of moles of an ideal gas, given the values of the other variables. It is particularly useful in applications such as thermodynamics, chemistry, and engineering, where it can be used to analyze and design gas-powered systems and processes.

To know more about Ideal gas law:

https://brainly.com/question/28257995

#SPJ11

The sample containing 20g of hydrogen and 320g of oxygen is hydrogen peroxide.

To determine if the sample containing 20g of hydrogen and 320g of oxygen is water or hydrogen peroxide, we'll analyze the molar ratios of hydrogen and oxygen in each compound.

Find the moles of hydrogen and oxygen in the sample:
For hydrogen, the molar mass is 1g/mol. So, moles of hydrogen = 20g / 1g/mol = 20 moles.
For oxygen, the molar mass is 16g/mol. So, moles of oxygen = 320g / 16g/mol = 20 moles.

Calculate the molar ratio of hydrogen to oxygen:
Molar ratio = moles of hydrogen / moles of oxygen = 20 moles / 20 moles = 1:1.

Water (H₂O) has a molar ratio of 2:1 for hydrogen to oxygen, while hydrogen peroxide (H₂O₂) has a molar ratio of 1:1 for hydrogen to oxygen.

Thus, the sample containing 20g of hydrogen and 320g of oxygen is hydrogen peroxide, as its molar ratio of hydrogen to oxygen is 1:1, which matches the molar ratio found in hydrogen peroxide.

To learn more about molar ratio visit:

https://brainly.com/question/30632038

#SPJ11

From the balanced chemical equation, we can see that for every 1 mole of NaOH reacted, we get 1 mole of NaClO produced. Therefore, 4.6 moles of NaOH are needed to form 2.3 moles of NaClO.

The chemical equation for the reaction balances out as follows:

2NaOH + Cl2 → NaCl + NaClO + H₂O

From the equation, we can see that 2 moles of NaOH react with 1 mole of Cl₂, 1 mole of NaCl, 1 mole of NaClO, and 1 mole of water. Therefore, the stoichiometric ratio of NaOH to NaClO is 2:1, i.e., 2 moles of NaOH reacts with 1 mole of NaClO.

To find out how many moles of NaOH are needed to form 2.3 moles of NaClO, we can use the following proportion:

2 moles NaOH : 1 mole NaClO = x moles NaOH : 2.3 moles NaClO

By cross-multiplication, we get:

2 moles NaOH × 2.3 moles NaClO = 1 mole NaClO × x moles NaOH

4.6 moles NaOH = x moles NaOH

To learn more about equation follow the link:

brainly.com/question/30087623

#SPJ4

The molarity of the solution diluted to the 1200.0 ml volume is found to be 0.220M.

The number of moles of H₂SO₄ in the original 22 mL solution can be calculated using the following formula,

moles of H₂SO₄ = Molarity × Volume (in liters)

22 mL = 22/1000 L

= 0.022 L

Substituting the given values, we get,

moles of H₂SO₄ = 12 M × 0.022 L

= 0.264 moles

The number of moles of H₂SO₄ will not change once the solution is diluted to a volume of 1200.0 mL since no H₂SO₄ is added or taken away. Consequently, the following formula can be used to determine the molarity of the diluted solution:

Molarity = moles of H₂SO₄ / Volume (in liters)

Again, we need to convert the volume to liters,

1200.0 mL = 1200.0/1000 L

= 1.200 L

Substituting the values, we get,

Molarity = 0.264 moles / 1.200 L

= 0.220 M

Therefore, the molarity of the diluted solution is 0.220 M.

To know more about molarity, visit,

https://brainly.com/question/30404105

#SPJ4

The mass of ammonia that will be produced according to the reaction given would be 17.9 g.

The balanced equation for the reaction is:

[tex]N_2 + 3H_2 -- > 2NH_3[/tex]

Also:

PV = nRT

The number of moles of nitrogen and hydrogen involved in the reaction can be calculated as:

From the balanced equation, we can see that the limiting reactant is nitrogen since it reacts with 3 moles of hydrogen to produce 2 moles of ammonia.

n(NH3) = (2 mol NH3 / 1 mol N2) x 0.526 mol N2 = 1.05 mol NH3

Mass of ammonia = mole x molar mass

                              = 1.05 mol x 17.03 g/mol

                              = 17.9 g

In other words, the mass of ammonia produced is 17.9 g.

More on stoichiometric calculations can be found here: https://brainly.com/question/27287858

#SPJ1

The concentration of the salt water solution is 1.71 mol/L.

When Bailey got sick, he was advised to gargle salt water to help ease the pain in his throat. To make the salt water solution, he added 25g of salt (NaCl) to a cup containing 250mL of water (H2O). Now we need to determine the concentration of this salt water solution in mol/L.

To do this, we first need to find the number of moles of NaCl in the solution. We can calculate this by dividing the mass of NaCl by its molar mass, which is the sum of the atomic masses of sodium and chlorine. The atomic mass of sodium is 22.99g/mol and that of chlorine is 35.45g/mol, so the molar mass of NaCl is 58.44g/mol.

Number of moles of NaCl = 25g ÷ 58.44g/mol = 0.427mol

Next, we need to find the volume of the solution in liters, which is 250mL ÷ 1000mL/L = 0.25L.

Finally, we can calculate the concentration of the salt water solution by dividing the number of moles of NaCl by the volume of the solution in liters.

Concentration of salt water solution = 0.427mol ÷ 0.25L = 1.71 mol/L

Therefore, the concentration of the salt water solution is 1.71 mol/L. This means that for every liter of the solution, there are 1.71 moles of NaCl present. It is important to note that this concentration is much higher than what is typically recommended for gargling salt water, which is usually a 0.9% (or 0.154 mol/L) solution.

To know more about salt water, visit:

https://brainly.com/question/5306491#

#SPJ11

The sample transferred 1,518.7 calories of heat.

First, we need to calculate the heat absorbed or released by the sample using the formula:

q = m * c * ∆T

where q is the heat transferred, m is the mass of the sample, c is the specific heat capacity of antimony, and ∆T is the temperature change.

Plugging in the values, we get:

q = 983.6 g * 0.049 cal/(g·°C) * 31.51 °C

q = 1,518.7 cal

Therefore, the sample transferred 1,518.7 calories of heat.

To know more about heat transfer refer here:

https://brainly.com/question/31065010

#SPJ11

a.It requires 1066 mL of 0.20 M KOH  to reach the equivalence point.

b.The equivalence point, the concentration of [Cl-], [K+], and [[tex]NH_{3}[/tex]] in the solution, is 0.175 M.

What is the Equivalence point?

The chemical equivalent between the added titrant and the sample analyte is called the equivalence point in a titration.

a. We need to know how many moles of [tex]NH_{4}Cl[/tex] are in the solution to calculate the volume of 0.20 M KOH needed to achieve the equivalence point.

First, we can determine how many moles  [tex]NH_{4}Cl[/tex] are present in the solution:

moles [tex]NH_{4}Cl[/tex] = mass / molar mass

moles [tex]NH_{4}Cl[/tex] = 11.4 g / 53.49 g/mol (molar mass of [tex]NH_{4}Cl[/tex])

moles [tex]NH_{4}Cl[/tex] = 0.2132 mol

At the equivalence point, all the [tex]NH_{4}Cl[/tex] has interacted with the KOH, resulting in an equal amount of moles of [tex]NH_{3}[/tex] and [tex]H_{2} O[/tex]. This suggests that 0.2132 moles of KOH are also needed to react with [tex]NH_{4}Cl[/tex] The volume of 0.20 M KOH required to react with 0.2132 mol can be determined using the equation for the reaction between [tex]NH_{4}Cl[/tex] and KOH:

[tex]NH_{4}Cl[/tex] + KOH → [tex]NH_{3}[/tex] + [tex]H_{2}O[/tex] + KCl

moles KOH = moles [tex]NH_{4}Cl[/tex]

                   = 0.2132 mol

volume of KOH = moles KOH / concentration of KOH

                          = 0.2132 mol / 0.20 mol/L

                           = 1.066 L or 1066 mL

Therefore, 1066 mL of 0.20 M KOH is required to reach the equivalence point.

b. At the equivalence point, an equal amount of moles of KOH and [tex]NH_{4}Cl[/tex] interacted to create [tex]NH_{3}[/tex], [tex]H_{2}O[/tex], and KCl.

We may determine the concentration of [Cl-] and [K+] in the solution following the reaction at the equivalence point by assuming volumes are additive:

moles KCl = moles [tex]NH_{4}Cl[/tex]

                 = 0.2132 mol

volume of solution = 150 mL + volume of KOH added

                                = 150 mL + 1066 mL

                                = 1216 mL

                                 = 1.216 L

[Cl-] = moles KCl / volume of solution

[Cl-] = 0.2132 mol / 1.216 L

[Cl-] = 0.175 M

[K+] = moles KCl / volume of solution

[K+] = 0.2132 mol / 1.216 L

[K+] = 0.175 M

The fact that the reaction between [tex]NH_{4}Cl[/tex]and KOH is a one-to-one reaction can be used to compute the concentration of [[tex]NH_{3}[/tex]]. As a result, 0.2132 mol of NH3 is likewise created at the equivalence point. Using the overall volume of the solution, we can get the [[tex]NH_{3}[/tex]] concentration:

[[tex]NH_{3}[/tex]] = moles [tex]NH_{3}[/tex]/ total volume of solution

[[tex]NH_{3}[/tex]] = 0.2132 mol / 1.216 L

[[tex]NH_{3}[/tex]] = 0.175 M

Therefore, at the equivalence point, the concentration of [Cl-], [K+], and [[tex]NH_3}[/tex]] in the solution is 0.175 M.

Learn more about the Equivalence point from the given link.

https://brainly.com/question/2496608

#SPJ4

It is anticipated that temperatures in the lower atmosphere would rise as carbon dioxide ([tex]CO_2[/tex]) levels in the atmosphere continue to rise. This is because CO2, a greenhouse gas, keeps heat from going back into space and instead stores it in the atmosphere. More heat will be trapped when [tex]CO_2[/tex] concentration rises, producing a warming effect. The Greenhouse Effect is a common name for this phenomenon.

According to predictions made by the Intergovernmental Panel on Climate Change (IPCC), a doubling of atmospheric [tex]CO_2[/tex] concentrations might lead to a 1.5–4.5 degree Celsius rise in global temperature. Among other things, this temperature rise may have a profound effect on ecosystems, weather patterns, and sea levels.

To know more about Greenhouse Effect, here

brainly.com/question/13706708

#SPJ1

If you weigh 100 pounds on Earth, you would weigh approximately 38 pounds on Mars. This is because the gravitational force that you experience on Mars is only about 38% of the gravitational force that you experience on Earth due to the difference in the masses of the two planets.

To figure out how much you would weigh on Mars if you weigh 100 pounds on Earth, we can use the fact that the surface gravity on Mars is approximately 38% of the surface gravity on Earth. This means that your weight on Mars would be 38% of your weight on Earth.

We can start by calculating what 38% of 100 pounds is:

38% of 100 pounds = (38/100) x 100 pounds = 0.38 x 100 pounds = 38 pounds

Hence, if you weigh 100 pounds on Earth, you will weigh around 38 pounds on Mars. Because of the difference in the masses of the two planets, the gravitational force you experience on Mars is only roughly 38% of the gravitational force you experience on Earth.

For more such questions on gravitational force, click on:

https://brainly.com/question/28623512

#SPJ11

In the following problems, various calculations related to solutions and chemical reactions are performed, including percent composition, molarity, and neutralization. The setup and units are provided, and the final answers are shown.

Let's proceed with the calculations:

1. Mass of NaOH = 22.5 g

Mass of water = 75.0 g

Total mass of solution = 22.5 g + 75.0 g = 97.5 g

% composition of NaOH = (mass of NaOH/total mass of solution) x 100%

= (22.5 g/97.5 g) x 100%

= 23.08%

% composition of water = (mass of water/total mass of solution) x 100%

= (75.0 g/97.5 g) x 100%

= 76.92%

2. Volume of solution = 3.00 L

Concentration of solution = 0.065 M

moles = concentration x volume

= 0.065 M x 3.00 L

= 0.195 mol

Therefore, 0.195 mol of aluminum nitrate are required.

3. Mass of aluminum nitrate = 7.50 g

Molar mass of aluminum nitrate = 213.0 g/mol

Concentration of solution = 0.500 M

moles of aluminum nitrate = mass/molar mass

= 7.50 g/213.0 g/mol

= 0.035 mol

Volume of solution = moles/concentration

= 0.035 mol/0.500 M

= 0.070 L = 70 mL

Therefore, 70 mL of 0.500 M solution can be prepared.

4. Volume of 15.0 M ammonium hydroxide required = (0.30 M/15.0 M) x 175.0 mL

= 3.50 mL

Therefore, 3.50 mL of 15.0 M ammonium hydroxide are needed.

5. Volume of potassium sulfate solution = 623 mL

% composition of potassium sulfate in solution = 22.5%

Density of solution = 1.23 g/mL

Mass of solution = volume x density

= 623 mL x 1.23 g/mL

= 766.29 g

Mass of potassium sulfate = % composition x mass of solution/100

= 22.5% x 766.29 g/100

= 172.91 g

Therefore, 172.91 g of potassium sulfate would be recovered.

6. Volume of hydrobromic acid solution = 100.0 mL

Concentration of hydrobromic acid solution = 11.0 M

Molar mass of hydrobromic acid = 80.91 g/mol

moles of hydrobromic acid = concentration x volume

= 11.0 M x 0.100 L

= 1.10 mol

Mass of hydrobromic acid = moles x molar mass

= 1.10 mol x 80.91 g/mol

= 88.99 g

Therefore, 88.99 g of hydrobromic acid are present in 100.0 mL of 11.0 M hydrobromic acid solution.

7. Volume of sulfuric acid sample = 525.0 mL

Concentration of sulfuric acid = 5.50 M

Density of sulfuric acid sample = 1.49 g/mL

Mass of sulfuric acid sample = volume x density

= 525.0 mL x 1.49 g/mL

= 779.25 g

Mass percent of sulfuric acid = (mass of sulfuric acid / total mass of solution) x 100%

= (779.25 g / 779.25 g) x 100%

= 100%

Therefore, the concentration of the sulfuric acid solution in mass percent is 100%.

8. The balanced equation for the reaction is:

H₂SO₄ + 2NaOH -> 2H₂O + Na₂SO₄

According to the balanced equation, the molar ratio between sulfuric acid (H₂SO₄) and sodium hydroxide (NaOH) is 1:2.

Volume of sulfuric acid sample = 15.0 mL

Volume of sodium hydroxide solution = 25.5 mL

Concentration of sodium hydroxide solution = 0.546 M

Moles of sodium hydroxide = concentration x volume

= 0.546 M x 25.5 mL

= 0.01397 mol

From the balanced equation, 1 mole of sulfuric acid reacts with 2 moles of sodium hydroxide. Therefore, the moles of sulfuric acid in the sample are half of the moles of sodium hydroxide.

Moles of sulfuric acid = 0.01397 mol / 2

= 0.006985 mol

Volume of sulfuric acid sample = 15.0 mL = 0.0150 L

Molarity of sulfuric acid = moles of sulfuric acid / volume of sulfuric acid

= 0.006985 mol / 0.0150 L

= 0.4657 M

Therefore, the molarity of the sulfuric acid is 0.4657 M.

To know more about the balanced equation refer here :

https://brainly.com/question/7181548#

#SPJ11

Complete question :

Show all calculation setups, including units, for all problems, and enter answer(s), including units and correct significant figures, on the line(s).

1. What will be the percent composition by mass of a solution made by dissolving 22.5 g of sodium hydroxide in 75.0 g water? NaOH

2. How many moles of aluminum nitrate are required to prepare 3.00 L of 0.065 M solution?

3. How many milliliters of 0.500 M solution can be prepared by dissolving 7.50 g of aluminum nitrate in water?

4. How many milliliters of 15.0 M ammonium hydroxide are needed to prepare 175.0 mL of 0.30 M ammonium hydroxide solution? 133

5. How many grams of potassium sulfate would be recovered by evaporating 623 mL of 22.5 % potassium sulfate solution to dryness (d 1.23 g/mL)?

6. How many grams of hydrobromic acid are in 100.0 mL of 11.0 M hydrobromic acid solution?

7. A 525.0 mL sample of 5.50 M sulfuric acid has a density of 1.49 g/mL. Express the concentration of the solution in mass percent. water +

8. Consider the following equation: sulfuric acid + sodium hydroxide sodium sulfate A 15.0 mL sample of sulfuric acid required 25.5 mL of 0.546 M sodium hydroxide for neutralization. Calculate the molarity of the acid. (Hint: start by writing and balancing the equation)

There are 3.95 grams of [tex]LiCl[/tex] in the solution.

The density of the solution is 1.46 g/mL, so the volume of the solution is:

volume = mass / density

volume = 85.0 g / 1.46 g/mL

volume = 58.22 mL

The concentration of the solution is 1.60 M, which means there are 1.60 moles of [tex]LiCl[/tex] in 1 liter of solution. To find the number of moles of [tex]LiCl[/tex]in the 58.22 mL of solution, we can use the following equation:

moles = concentration x volume (in liters)

First, we need to convert the volume of the solution to liters:

volume = 58.22 mL / 1000 mL/L

volume = 0.05822 L

Now we can calculate the number of moles of [tex]LiCl[/tex] in the solution:

moles = 1.60 M x 0.05822 L

moles = 0.0932 moles

Finally, we can calculate the mass of[tex]LiCl[/tex]in the solution using its molar mass:

mass = moles x molar mass

mass = 0.0932 moles x 42.39 g/mol

mass = 3.95 g

Therefore, there are 3.95 grams of [tex]LiCl[/tex] in the solution.

To know more about molar mass refer to-

https://brainly.com/question/22997914

#SPJ11

The metal has a specific heat of 0.385 J/g°C.

To solve for the specific heat of the metal, we need to use the equation:
Q = mCΔT
where Q is the heat transferred, m is the mass of the substance, C is the specific heat, and ΔT is the change in temperature.

In this case, the heat transferred from the metal to the water can be calculated as:
Q = mcΔT
where c is the specific heat of water (4.184 J/g°C) and ΔT is the change in temperature of the water (from 24.0°C to 32.5°C).

Q = (50.0 g)(4.184 J/g°C)(32.5°C - 24.0°C)
Q = 1743.8 J

The heat transferred from the metal to the water is equal to the heat absorbed by the metal:
Q = mCΔT

where m is the mass of the metal and ΔT is the change in temperature of the metal (from 100.0°C to 32.5°C).
1743.8 J = (23.8 g)C(100.0°C - 32.5°C)
C = 0.385 J/g°C

Therefore, the specific heat of the metal is 0.385 J/g°C.

For more question on metal

https://brainly.com/question/4701542

#SPJ11

Sample A or Sample B cannot be definitively determined as more alkaline based on the given information.  The equation for sodium carbonate dissolving in water shows that it produces both sodium ions (Na⁺) and hydroxide ions (OH⁻), which are the ions responsible for making a solution alkaline.

However, the fact that not all of the sodium carbonate dissociates into ions means that the concentration of alkaline ions in the solution will be less than the total concentration of sodium carbonate added. Therefore, the alkalinity of a sample cannot be determined solely based on the amount of sodium carbonate present.

Other factors, such as the presence of other alkaline substances or the pH of the solution, would need to be considered to determine which sample is more alkaline.

To know more about the sodium carbonate refer here :

https://brainly.com/question/13565765#

#SPJ11

The outcome of pulse rate measurements in blackworms collected from an acidic environment will likely depend on how the blackworms respond to changes in pH and whether they experience acidosis or alkalosis as a result.

It is difficult to predict the outcome of pulse rate measurements in blackworms collected from an environment with an acidic pH without more information about the blackworms' physiological responses to changes in pH. However, it is known that changes in pH can have significant effects on the body's internal environment, leading to either acidosis or alkalosis. Acidosis occurs when the pH of the blood drops below normal, leading to an increase in acidity, while alkalosis occurs when the pH of the blood rises above normal, leading to a decrease in acidity. Both acidosis and alkalosis can affect pulse rates. In the case of acidosis, the pulse rate may increase in order to compensate for the effects of increased acidity. Conversely, in alkalosis, the pulse rate may decrease in order to minimize the effects of decreased acidity.

Learn more about acidosis https://brainly.com/question/23710507

#SPJ11

Change in temperature of the Magnesium sample is calculated as 23.7°C.

Heat energy is a form of energy that is transferred between objects or systems due to temperature difference. It flows from hotter to cooler objects, and its amount is measured in joules.

As we know; Q = m c ΔT

Q is the amount of heat absorbed, m is mass of the object, c is specific heat, and ΔT is change in temperature.

ΔT = Q / (m * c)

ΔT = 1300 J / (54.2 * 1.023 )

ΔT = 23.7°C

Therefore, the change in temperature of the Magnesium sample is 23.7°C.

To know more about heat energy, refer

https://brainly.com/question/934320

#SPJ1

The complete reaction of 0.551 grams of nitric oxide gas would produce 0.846 grams of nitrogen dioxide.

The given chemical equation shows that 2 moles of nitric oxide (NO) gas reacts with 1 mole of oxygen (O2) gas to produce 2 moles of nitrogen dioxide (NO2). Therefore, the stoichiometric ratio of NO to NO2 is 2:2 or 1:1. This means that for every 1 mole of NO gas, 1 mole of NO2 gas is produced.

To determine the mass of NO2 produced from 0.551 grams of NO gas, we need to first convert the mass of NO into moles using its molar mass. The molar mass of NO is 30.01 g/mol (14.01 g/mol for N and 16.00 g/mol for O).

0.551 g of NO is equivalent to 0.551 g / 30.01 g/mol = 0.0184 moles of NO.

Since the stoichiometric ratio of NO to NO2 is 1:1, the number of moles of NO2 produced will also be 0.0184 moles.

The molar mass of NO2 is 46.01 g/mol (14.01 g/mol for N and 2 x 16.00 g/mol for 2 O atoms).

Therefore, the mass of NO2 produced will be:

0.0184 moles x 46.01 g/mol = 0.846 grams.

Hence, the complete reaction of 0.551 grams of nitric oxide gas would produce 0.846 grams of nitrogen dioxide.

To know more about nitric oxide, visit:

https://brainly.com/question/31737620#

#SPJ11

Part 1: This diagram depicts an endothermic reaction. Because the products have a higher potential energy than the reactants, energy is absorbed during the reaction.

Furthermore, the energy level of the products is greater than the reaction's activation energy, showing that energy must be given to the system for the reaction to occur.

Part 2: To calculate the total enthalpy change (H) from the diagram, subtract the energy of the reactants from the energy of the products. Because the energy of the products is greater than the energy of the reactants in an endothermic reaction, H will be positive.

To calculate the activation energy (Ea) from the diagram, subtract the energy of the reactants from the energy of the transition state. The activation energy is the smallest amount of energy required for the reaction to occur, hence it is the difference in energy between the reactants and the highest point on the diagram.

Ea will be positive in this situation because energy must be added to the system to achieve the transition state.

learn more about enthalpy here

https://brainly.com/question/14047927

#SPJ1

Particle size is typically measured in units such as micrometers (µm) or nanometers (nm), which represent very small lengths on the order of thousandths or millionths of a meter, respectively.

4.2 cm is much larger than the typical size of particles and is more in the range of everyday objects.

For example, 4.2 cm is roughly the size of a golf ball or a small tomato. If you have additional information about the particle's size, such as its shape or the material it is made of, I may be able to provide more specific guidance.

Also, a particle that is 4.2 nanometers (nm) in size falls in the range of nanoscale particles, which are typically much smaller than everyday objects and are invisible to the nakεd eye.

The size of the particle can provide some clues about its potential identity or classification, but additional information about its properties, composition, and context is needed to determine its specific identity.

Learn more about particle size here: https://brainly.com/question/29097852

#SPJ1

In the 17th group of the modern periodic table, fluorine has the highest ability to receive electrons.

This is because it has the highest electronegativity among the elements in this group, making it more likely to attract and accept electrons from other elements during chemical reactions.

Fluorine is indeed the most electronegative element in the periodic table. Electronegativity is a measure of an atom's tendency to attract electrons in a chemical bond.

Fluorine's high electronegativity arises from its small atomic size and strong nuclear charge, which results in a strong attraction for electrons.

Due to its high electronegativity, fluorine has a strong ability to attract and accept electrons from other elements during chemical reactions. It readily forms covalent bonds by sharing electrons with less electronegative elements.

Fluorine's electron affinity and its ability to form stable, negatively charged ions make it a strong oxidizing agent.

It's worth noting that the trend of increasing electronegativity generally follows from left to right across a period and decreases down a group in the periodic table.

Therefore, while fluorine is the most electronegative element in Group 17 (the halogens), it may not necessarily have the highest ability to receive electrons among all elements in the 17th group.

To learn more about elements, refer below:

https://brainly.com/question/13025901

#SPJ11

The answer is  is approximately 344.16 L.

To find the volume of 34.6 mol O2 at 2.5 atm and 30°C, we can use the Ideal Gas Law equation: PV = nRT.

In this equation:
P = pressure (2.5 atm)
V = volume (which we need to find)
n = moles of gas (34.6 mol O2)
R = ideal gas constant (0.0821 L atm/mol K)
T = temperature in Kelvin (30°C + 273.15 = 303.15 K)

Rearrange the equation to solve for V: V = nRT / P

Now, plug in the values: V = (34.6 mol)(0.0821 L atm/mol K)(303.15 K) / (2.5 atm)

Calculate the volume: V ≈ 344.16 L

The volume of 34.6 mol O2 at 2.5 atm and 30°C is approximately 344.16 L.

To know more about Ideal gas law:

https://brainly.com/question/27870704

#SPJ11

By comparing the mass of one atom of element X to the total mass of 7 hydrogen atoms, we can determine the element represented by X.

The mass of an atom is determined by the total number of protons, neutrons, and electrons in the atom. Protons and neutrons are located in the nucleus of an atom, while electrons are located in the electron cloud surrounding the nucleus.

To illustrate that the mass of an atom of element X is equivalent to the total mass of 7 hydrogen atoms, we first need to determine the mass of an atom of hydrogen and the mass of an atom of element X.

The mass of an atom of hydrogen is approximately 1 atomic mass unit (amu). Therefore, the total mass of 7 hydrogen atoms is 7 amu.

Now, let's assume that the mass of an atom of element X is also 7 amu. This means that the total number of protons, neutrons, and electrons in one atom of element X is equivalent to the total number in 7 hydrogen atoms.

Therefore, the element represented by X is nitrogen. The atomic mass of nitrogen is 14.007 amu, which is equivalent to the total mass of 7 hydrogen atoms.

In summary, the mass of an atom is determined by the total number of protons, neutrons, and electrons in the atom. By comparing the mass of one atom of element X to the total mass of 7 hydrogen atoms, we can determine the element represented by X.

To know more about hydrogen atoms, visit:

https://brainly.com/question/29695801#

#SPJ11

The options that describe the oxidation of the primary alcohols is a carboxylic acid can be produced by oxidation of a primary alcohol. Mild oxidizing conditions will result in an aldehyde product.

The Primary alcohols will be oxidized to form the aldehydes and the carboxylic acids. The secondary alcohols will be oxidized to give the ketones. The Tertiary alcohols, in the contrast, cannot be oxidized by without breaking the molecules of the C–C bonds.

The Primary alcohols and the aldehydes will be normally oxidized to the carboxylic acids using the potassium dichromate solution in the presence of the dilute sulfuric acid that is H₂SO₄.

To learn more about oxidation here

https://brainly.com/question/21795438

#SPJ4

The given reaction is a reversible reaction where reactants (4NH₃(g) + 3 O₂(g)) combine to form products (2N₂ + 6H₂O(g)) and vice versa. At equilibrium, both reactants and products are present in concentrations such that the rate of the forward reaction is equal to the rate of the backward reaction. This state is called equilibrium.

To determine which species would be present in higher concentration at equilibrium, we need to analyze the thermodynamic favorability of the reaction. The change in Gibbs free energy (ΔG) is a measure of thermodynamic favorability, where a negative ΔG indicates that the reaction is spontaneous and favorable in the forward direction.

In this case, the given value of ΔG is -1360 kJ/mol, which is a large negative value. This suggests that the forward reaction (4NH₃(g) + 3 O₂(g) → 2N₂ + 6H₂O(g)) is highly favorable thermodynamically.The equilibrium constant (Kc) is another important parameter that helps to determine the species present at equilibrium.

Kc is the ratio of the product of the concentrations of the products raised to their stoichiometric coefficients to the product of the concentrations of the reactants raised to their stoichiometric coefficients. The higher the value of Kc, the greater the concentration of the products at equilibrium.

In this reaction, the equilibrium constant is calculated by using the formula:

Kc = ([N₂]² [H₂O]⁶) / ([NH₃]⁴ [O₂]³)

As the value of Kc is greater than 1, it suggests that at equilibrium, the products (N₂ and H₂O) would be present in higher concentrations as compared to the reactants (NH₃ and O₂). This is due to the thermodynamic favorability of the reaction, where the forward reaction is more favorable than the backward reaction.

In conclusion, at equilibrium, the species present in higher concentrations would be N₂ and H₂O, due to the thermodynamic favorability of the reaction and the high value of the equilibrium constant.

To know more about reversible reaction  refer here

https://brainly.com/question/16614705#

#SPJ11