In order to design a spring-launched roller coaster that will carry two passengers per car, a spring constant of approximately 4255.78 N/m is needed for the roller coaster to be safe.
Several factors must be taken into consideration. The car must go up a 10-m-high hill and then descend 15 m to the track's lowest point. The maximum amount the spring can be compressed is 2.2 m, and a loaded car will have a maximum mass of 440 kg. Additionally, for safety reasons, the spring constant should be 11% larger than the minimum needed for the car to just make it over the top.
To determine the spring constant needed for the roller coaster, we can use the following formula:
U = (1/2)kx²where U is the potential energy of the spring, k is the spring constant, and x is the distance the spring is compressed. To find the minimum spring constant needed for the car to just make it over the top of the hill, we can set the potential energy of the spring equal to the potential energy of the car at the top of the hill:
U = mgh, where m is the mass of the car, g is the acceleration due to gravity, and h is the height of the hill.
U = (1/2)kx²mgh
= (1/2)kx²k = 2mgh/x²
Plugging in the given values, we get: k = 2(440 kg)(9.81 m/s²)(10 m)/(2.2 m)²k ≈ 3831.64 N/m. To find the spring constant needed for safety reasons, we can multiply the minimum spring constant by 1.11:k' = 1.11k' ≈ 4255.78 N/m
To know more about roller coaster, refer here:
https://brainly.com/question/15908029#
#SPJ11
Why a liquid needs a container when a solid does not?
The correct option is B, a liquid needs a container when a solid does not Solids have definite shapes, and liquids fill their containers.
Solids are one of the three fundamental states of matter, along with liquids and gases. In a solid, the molecules are tightly packed together, and the substance maintains a fixed shape and volume. The particles in a solid are held together by strong intermolecular forces, which prevent them from moving freely.
Solids have many properties that distinguish them from other states of matter. For example, they are usually denser and more rigid than liquids and gases. Solids can also be classified into different types based on their internal structure, such as crystalline solids, which have a regular and repeating pattern of atoms, and amorphous solids, which lack a definite long-range structure.
To learn more about Solids visit here:
brainly.com/question/17061172
#SPJ4
Complete Question: -
Which best describes why a liquid needs a container when a solid does not?
A. Solids fill their containers, and liquids have definite shapes.
B. Solids have definite shapes, and liquids fill their containers.
C. Solids particles do not expand to fill their containers, and liquid particles do.
D. Solids particles expand to fill their containers, and liquid particles do not.
a net force of 89.0 n propels a 4.00-kg model rocket. after being launched from rest, how fast is the rocket traveling after 2.00 s? enter the numerical value in si units.
A net force of 89.0 n propels a 4.00-kg model rocket. after being launched from the rest, the rocket will be traveling at: a velocity of 44.5 m/s.
The net force of 89.0 N propels a 4.00-kg model rocket. After being launched from rest, the rocket will have an acceleration of 89.0 N/4.00-kg = 22.25 m/s².
After 2.00 seconds, the rocket's velocity will be 2.00s x 22.25m/s² = 44.5 m/s. Therefore, after 2.00 s, the rocket will be traveling at a velocity of 44.5 m/s.
To calculate this, we first need to know the net force of the rocket. This is equal to the thrust of the rocket (F = ma) multiplied by the mass of the rocket (m = 4.00 kg). We can then use this net force to calculate the acceleration of the rocket, which is equal to
F/m = 89.0 N/4.00 kg = 22.25 m/s².
Now that we know the acceleration of the rocket, we can use this to calculate the velocity of the rocket after 2.00 s. To do this, we multiply the acceleration by the time, which in this case is 2.00 s. This gives us an initial velocity of 2.00s x 22.25m/s² = 44.5m/s.
This means that after 2.00 s, the rocket will be traveling at a velocity of 44.5 m/s.
To know more about force refer here:
https://brainly.com/question/13191643#
#SPJ11
if the gravitational force between two objects is 300 n and the mass of one object is 20.0 kg, while the other object is 30 kg, what is the distance between the objects?
The gravitational force between two objects is 300 N and the mass of one object is 20.0 kg, while the other object is 30 kg, we have to calculate the distance between the objects the distance is 3.67 m.
What is the distance between the objects?The formula for calculating gravitational force between two objects is given by F = G × m₁ × m₂ / r²
where, F = gravitational force between two objects, m₁ = mass of object 1, m₂ = mass of object 2, r = distance between the objects, G = gravitational constant G = 6.67 × 10⁻¹¹ N·m²/kg².
Now, we can use the above formula to calculate the distance between the objects. F = 300 N, m₁ = 20.0 kg, m₂ = 30 kg, G = 6.67 × 10⁻¹¹N·m²/kg². We have to find
r = ?, F = Gm₁m₂/ r²
r = 6.67 × 10⁻¹¹ × 20 × 30/ 300
r = 3.67m
Therefore, the distance between the objects is 3.67 meters.
Read more about force here:
https://brainly.com/question/12785175
#SPJ11
if the ball is in contact with the floor for 0.0300 seconds, what is the average force (in n) the floor exerts on the ball?
When the ball is in contact with the floor for 0.0300 seconds, the average force (in N) the floor exerts on the ball is 0 N. F = (Δp) / Δt
where Δp is the change in momentum of the ball and Δt is the time interval during which the change in momentum occurred.
Δp = mvf - mvi
where mvf is the final velocity of the ball and mvi is the initial velocity of the ball.
In this case, the ball is dropped from a certain height and comes to rest on the ground. This means that its initial velocity (mvi) is zero.
Hence:Δp = mvf - mvi
= mvf - 0
= mvf
The momentum is conserved in the vertical direction, which means that the final momentum (mvf) of the ball after bouncing is equal in magnitude but opposite in direction to its initial momentum.
Hence: mvf = - mvi
= - m * v0
where m is the mass of the ball and v0 is its initial velocity (which is zero).
Substituting the above expression for mvf into the equation for the average force:
F = (- m * v0) / Δt
where Δt = 0.0300 seconds is the time interval during which the change in momentum occurred.
F = (- m * v0) / Δt
= (- 0.250 kg * 0) / 0.0300 seconds
= 0 N
Therefore, the average force (in N) the floor exerts on the ball is 0 N.
To know more about momentum:
https://brainly.com/question/29598011
#SPJ11
what is the acceleration on a body that approached the arth and comes within 6 earth radii of the earth's surface
The acceleration on a body that approaches the Earth and comes within 6 Earth radii of the Earth's surface is known as the "gravitational acceleration."
This is caused by the gravitational pull of the Earth, which increases as the body approaches the Earth's surface. The acceleration is given by the equation a = GM/r², where G is the gravitational constant, M is the mass of the Earth, and r is the distance from the center of the Earth. For a body that comes within 6 Earth radii of the Earth's surface, the acceleration would be equal to GM/36, where G is the gravitational constant and M is the mass of the Earth. This acceleration can be used to calculate the velocity of the body and its trajectory around the Earth.
For more questions on gravitational acceleration
https://brainly.com/question/14374981
#SPJ11
a physics student wants to construct a model of an electric motor. The student creates a chart for the steps in the process. the chart shows what the student recorded so far:
what is the correct ordering of these cards to model how an electric motor works?
An electric motor is a device that transforms electrical energy into mechanical energy. Most electric motors create force in the form of torque imparted to the motor's shaft by interacting between the magnetic field of the motor and electric current in a wire winding.
How does an electric motor work?Electric motors generate motion by transferring electrical energy to mechanical energy. The interaction of a magnetic field and winding alternating (AC) or direct (DC) current generates force within the motor.
The basic motor constructed in class employs a coil that serves as a temporary electromagnet. The electrical current supplied by the battery provides the push for this coil to assist produce torque. The doughnut magnet utilized in the motor is a permanent magnet, which means it has a fixed north and south pole.
Learn more about electric motor
https://brainly.com/question/20317436
#SPJ1
a solenoid has 21 turns per centimeter of its length. the solenoid is twisted into a circle so that it becomes shaped like a toroid. what is the magnetic field at the center of each turn of the toroid? the current is 15
The magnetic field at the center of each turn of the toroid is 1.5 x 10^-5 T.
To find the magnetic field at the center of each turn of the toroid, we need to use the formula for the magnetic field inside a toroid,
B = (μ * n * I) / (2πr)
where, B is the magnetic field, μ is the permeability of free space, n is the number of turns per unit length, which is 21 turns/cm,
I is the current, which is 15 A
r is the radius of the toroid.
Circumference of the toroid,
C = 2πr = (number of turns per unit length) * length of solenoid
The length of the solenoid is not given, so let's assume it is 1 meter. Then, the circumference of the toroid is,
C = (21 turns/cm) * (100 cm/m) * (1 m) = 2100 turns
So, the radius of the toroid is,
r = C / (2π) = 2100 turns / (2π) = 1050 / π turns
The magnetic field at the center of each turn of the toroid,
B = (4π x 10^-7 T·m/A) * (21 turns/cm) * (15 A) / (2π * 1050/π turns)
B = 1.5 x 10^-5 T
To know more about magnetic field, here
brainly.com/question/29035965
#SPJ4
if the moon enters its waxing crescent phase tonight, then what lunar phase will you see in approximately two weeks? multiple choice question.
If the moon enters its waxing crescent phase tonight, then you will see the First Quarter lunar phase in approximately two weeks.
What is the lunar phase?
The Moon is in a specific position during a lunar phase. During the lunar phase cycle, it passes through four primary phases: the new moon, the first quarter, the full moon, and the last quarter. In the new moon phase, the Moon is between the Sun and Earth, and the side of the Moon visible to us is dark.
In contrast, in the full moon phase, the Moon is on the opposite side of the Earth from the Sun, and the side visible to us is entirely illuminated. The first quarter moon is half illuminated and half in shadow, with the illuminated portion appearing as a semi-circle.
The last quarter moon is also half illuminated and half in shadow, but the illuminated portion appears in the opposite direction from the first quarter moon. If the moon enters its waxing crescent phase tonight, you will see the first quarter lunar phase in approximately two weeks. This phase is also known as a half moon, and it occurs when the moon is one-quarter of the way through its orbit around the Earth.
During the first quarter, the illuminated portion of the moon increases each day, until it reaches the full moon phase.
Learn more about phases of the moon here:
https://brainly.com/question/2285324#
#SPJ11
2. The cylinder moves at this velocity all the way around the circular path. Yet when we view the side to side motion, the cylinder does not appear to move with a constant velocity. At which location during the side-to-side motion does the cylinder appear to have the minimum side-to-side velocity?
3. At which location during the side-to-side motion does the cylinder appear to have the maximum side-to-side speed
The minimum side-to-side velocity is at the top and bottom points, while the maximum side-to-side speed is at the left and right points of the circular path.
The cylinder moves at a constant velocity around the circular path, but its side-to-side motion does not appear to have a constant velocity due to the circular motion.
1. The minimum side-to-side velocity occurs when the cylinder is at the top and bottom points of the circular path. At these points, the cylinder's motion is primarily vertical, causing the side-to-side motion to appear slower.
2. The maximum side-to-side speed occurs when the cylinder is at the left and right points of the circular path. At these points, the cylinder's motion is primarily horizontal, causing the side-to-side motion to appear faster.
More on speed and velocity: https://brainly.com/question/5794232
#SPJ11
What Enlightenment idea is represented by the headline
The headline "Enlightenment ideas of freedom, equality, and justice for all" represents the idea of the Enlightenment that human beings are rational, capable of determining right from wrong, and deserving of rights and freedoms, such as freedom of speech, freedom of religion, and equality before the law.
These ideas were a major factor in the shift away from absolute monarchies, and towards governments of the people, by the people, and for the people. The Enlightenment period also saw the development of democracy and of the rule of law, where the government is subject to a set of laws, rather than relying on the whims of the ruler. Enlightenment thinkers sought to empower the individual, giving people the freedom to think and act as they pleased, rather than relying on the decisions of rulers.
For such more questions on Enlightenment idea :
brainly.com/question/11185091
#SPJ11
what is it called when you can see one image from one angle and a different image from a different angle?
The phenomenon in which an object appears to be different when viewed from different angles is known as a lenticular image. Lenticular printing is the process of producing these images.
What is Lenticular printing?Lenticular printing is a method of producing a lenticular image, which is a printed image that shifts as the viewing angle changes. Lenticular printing is a method of generating a composite image by interlacing two or more images using a lenticular lens.
A lenticular image is a picture that appears to alter when viewed from different angles. It is formed by placing a sheet of tiny cylindrical lenses or "lenticules" over a photo that has been divided into a number of frames. The frames are interlaced, resulting in a composite image that alters when viewed from different angles.
The lenticular function as lenses, refracting light at various angles and allowing each eye to see a distinct image. To generate the lenticular image effect, the interlaced images must be magnified and printed onto a lenticular lens. The result is a plastic sheet that appears to display a different image depending on the angle of the viewer's gaze.
To know more about lenticulars image:
https://brainly.com/question/8590716
#SPJ11
4. what is the name of the region where the most common type of comets, long period comets, come from, and how many of these objects exist?
The region where most long period comets come from is called the Oort Cloud and it is estimated that it contains up to 2 trillion comets.
The region where most long period comets originate is known as the Oort Cloud. The Oort Cloud is a vast spherical region surrounding the Sun located roughly halfway between the orbits of Neptune and Proxima Centauri. It is estimated to contain up to two trillion icy objects, which are leftovers from the formation of the solar system. Long period comets, which take longer than 200 years to orbit the Sun, originate from the Oort Cloud and make their way towards the inner solar system. They are usually only visible when they come close enough to the Sun to be warmed and shed dust and gas, which form the visible tail of the comet. As they come closer to the Sun, the gravitational attraction of the planets often deflects their orbits and causes them to return to the Oort Cloud for millions of years before repeating the cycle.
For more questions related to comets.
https://brainly.com/question/12443607
#SPJ11
helppp pleaseeee enough points
The resistance of the copper wire of length 4 m and diameter 0.002 m is 2.25×10⁻² ohms.
What is resistance?Resistance is the opposition to the flow of current in a circuit.
To calculate the reistance of the copper wire, we use the formula below.
Formula:
R = 4ρL/πd².................. Equation 1Where:
R = Resistance of the copper wireρ = Resistivity of the copper wire at 20°CL = Length of the copper wired = diameter of the copper wireπ = constant called PieFrom the question,
Given:
d = 0.002 mL = 4 mρ = 1.77×10⁻⁸ ohm-metreπ = 3.14Substitute these values into equation 1
R = (4×4×1.77×10⁻⁸)/(3.14×0.002²)R = 2.25×10⁻² ohmsHence, the resistance of the copper wire is 2.25×10⁻² ohms.
Learn more about resistance here: https://brainly.com/question/29635283
#SPJ1
which choice accurately describes what light is?responsesneither a particle nor a waveneither a particle nor a waveboth a particle and a waveboth a particle and a wave,only a particleonly a particleonly a waveonly a wave
The correct option is C. Both a particle and a wave accurately describe what light is. This is known as the wave-particle duality of light
Wave-particle duality is a fundamental concept in physics that describes the behavior of matter and energy at the atomic and subatomic scale. It states that matter and energy can exhibit both wave-like and particle-like behavior, depending on how they are observed or measured.
For example, light can be observed as both a wave and a particle, depending on the experiment. When it behaves as a wave, it exhibits characteristics such as diffraction, interference, and polarization. When it behaves as a particle, it exhibits characteristics such as energy and momentum. The wave-particle duality has significant implications for our understanding of the nature of reality and the fundamental laws of physics, and it has led to the development of many important technologies, such as lasers, transistors, and semiconductors.
To learn more about Wave-particles visit here:
brainly.com/question/15385740
#SPJ4
Complete Question: -
which choice accurately describes what light is? responses neither
A). a particle nor a wave neither
B). a particle nor a wave
C). both a particle and wave both a particle and a wave,
D). only a particle only a particle only a wave only a wave
in uniform circular motion, which of the following quantities are constant? check all that apply. in uniform circular motion, which of the following quantities are constant?check all that apply. speed the magnitude of the net force centripetal acceleration instantaneous velocity
In a uniform circular motion, the speed, the magnitude of the net force, centripetal acceleration, and instantaneous velocity are all constant.
The motion of an object traveling along a circular path with a constant speed is known as uniform circular motion.
Speed: The speed of an object in uniform circular motion remains constant as the object moves in a circular path.
The magnitude of Net Force: In a uniform circular motion, an object is experiencing a net force towards the center of the circle. This net force is usually referred to as the centripetal force. The magnitude of the centripetal force is always constant in a uniform circular motion.
Centripetal Acceleration: Centripetal acceleration is the rate of change of velocity of an object in uniform circular motion. This acceleration is always constant, and can be calculated using the equation a = v²/r, where v is the speed of the object and r is the radius of the circle.
Instantaneous Velocity: Instantaneous velocity is the velocity of an object at a specific point in time. Since an object in uniform circular motion moves at a constant speed, the instantaneous velocity is also constant.
Therefore, in a uniform circular motion, all the given quantities are constant.
To know more about uniform circular motion, refer here:
https://brainly.com/question/2285236#
#SPJ11
a rod undergoes a change in temperature. the change in length is: a rod undergoes a change in temperature. the change in length is:
It is a linear expansion, when a rod undergoes a change in temperature and there is a change in its length.
The length that a rod changes to as a result of a temperature change relies on the rod's initial length, the rate of temperature change, and the material's coefficient of linear expansion. The formula for linear expansion is:
ΔL = αL₀ΔT
Where ΔL is the change in length of the object, is the coefficient for linear expansion of the material in question, and L₀ is the initial length of the object.
Volumetric expansion refers to change in one dimension (volume), whereas linear expansion refers to change in one dimension (length) (volumetric expansion). The area thermal expansion coefficient connects a material's area changes to temperature changes.
To know more about linear expansion, refer:
https://brainly.com/question/19495810
#SPJ4
Complete question is:
A rod undergoes a change in temperature. the change in length is:
A. linear expansion
B. volumetric expansion
a series circuit is a current divider and a parallel circuit is a voltage divider circuit. select one: a. true b. false
The given statement " A series circuit is a current divider and a parallel circuit is a voltage divider circuit " is True
In a series circuit, the electric current is the same through each component, and the total current is equal to the sum of the currents through each component. Therefore, the current is divided among the components.
In a parallel circuit, the potential voltage across each component is the same, and the total voltage is equal to the sum of the voltages across each component. Therefore, the voltage is divided among the components.
Know more about electric current here:
https://brainly.com/question/2264542
#SPJ11
Which of Newton's laws explains why your hands get red when you press them hard against a wall?
O A.
Newton's law of gravity
O B.
Newton's first law of motion
O C.
Newton's second law of motion
O D.
Newton's third law of motion
one cycle of the power dissipated by a resistor ( ) is given by this periodic signal repeats in both directions of time. what is the amplitude of the pwm voltage signal applied across the 500- resistor
The maximum amplitude of the PWM voltage signal applied across the 500-ohm resistor is: Vmax=2*I*R=500*I
The power dissipated by a resistor during one cycle is given by the periodic signal. The PWM voltage signal applied across a 500 Ω resistor is analyzed in this question. The amplitude of the signal is determined below.
Pulse Width Modulation is the PWM. It's a process for varying the pulse width of a square wave, which changes the percentage of time the signal is high to low. The pulse width can be varied to create the desired output signal level. It is frequently utilized in applications where analog signals are required, including control systems, power supplies, and audio systems. The maximum voltage Vm of the PWM voltage signal can be found by calculating the RMS value of the pulse. The root-mean-square value is the square root of the mean of the square of the signal over a given period. If we use a pulse that has a duty cycle of 50%, this formula simplifies to: Vmax=Vm+0.5Vdc where Vdc is the average value of the pulse.
The maximum amplitude can be determined using this formula: Vmax=I*R where I is the current and R is the resistance. The current flowing through the resistor is proportional to the voltage applied to it, and the voltage is proportional to the duty cycle of the PWM signal, which varies from 0 to 1. Thus, the voltage applied to the resistor is proportional to the duty cycle and can be expressed as: V=Vmax*D where D is the duty cycle. Thus, the amplitude of the PWM voltage signal applied across a 500-ohm resistor is: Vmax=2*I*R=500*I. Using this equation, we can determine the maximum amplitude of the PWM voltage signal applied across the 500-ohm resistor.
For more such questions on Pulse Width Modulation.
https://brainly.com/question/29358007#
#SPJ11
Explain why the transverse pulse traveling on a rope held by two people reflects in the opposite orientation each time it reaches a person.
Drag the terms on the left to the appropriate blanks on the right to complete the sentences. ANSWER: - greater - oppose - second law - increase - smaller - the same
- third law - first law
When a transverse wave pulse reaches a fixed end of the rope, the displacement of the rope end exerts a force on the object that is keeping the end fixed (in this case, a person). By Newton's ___ the person must exert a force of __ magnitude in ___ direction; otherwise the end of the rope would not remain stationary but would the opposite accelerate in the direction of the force due to the wave disturbance. Because this force acts to ___ the force of the incoming wave pulse, it initiates an outgoing wave pulse that is inverted with respect to the incoming wave pulse.
To complete the given sentences explaining why the transverse pulse traveling on a rope held by two people reflects in the opposite orientation each time it reaches a person order of the words used is third law, the same, oppose, increase.
When a transverse wave pulse reaches a fixed end of the rope, the displacement of the rope end exerts a force on the object that is keeping the end fixed (in this case, a person). By Newton's third law, the person must exert a force of the same magnitude in oppose direction; otherwise, the end of the rope would not remain stationary but would accelerate in the direction of the force due to the wave disturbance. Because this force acts to increase the force of the incoming wave pulse, it initiates an outgoing wave pulse that is inverted with respect to the incoming wave pulse.
When a transverse pulse traveling on a rope held by two people reaches one of the people, the pulse is reflected in the opposite orientation. This happens because of the interaction between the pulse and the person holding the rope.
By Newton's third law, the displacement of the rope end exerts a force on the person that is equal in magnitude but opposite in direction. If the person did not exert an equal and opposite force, the end of the rope would not remain stationary but would instead accelerate in the direction of the force due to the wave disturbance.
The force exerted by the person opposes the force of the incoming wave pulse, initiating an outgoing wave pulse that is inverted with respect to the incoming wave pulse. This happens due to the conservation of energy and momentum, which are described by Newton's first and second laws. The outgoing pulse has a smaller amplitude than the incoming pulse because some energy is lost in the reflection process.
Learn more about transverse wave pulse:
https://brainly.com/question/15531840
#SPJ11
the intensity of the sound of a television commercial is 10 times greater than the intensity of the television program it follows. by how many decibels does the loudness increase?
The television commercial loudness increases by 10 decibels.
Increase in the Intensity of soundThe decibel (dB) scale is a logarithmic measure of sound intensity. The intensity of a sound is measured in watts per square meter and the decibel scale is a way to express the relative loudness of a sound, compared to a reference level.
A 10 dB increase in intensity is a 10-fold increase in sound power. This means that a sound with an intensity of 10 watts per square meter is 10 times louder than a sound with an intensity of 1 watt per square meter.
Learn more about Intensity of sound here:
https://brainly.com/question/17062836
#SPJ1
what normal force does a horizontal table exert on a 3.5 kg book that sits at rest? be sure to draw a diagram.
The normal force (F⃗n) exerted by the horizontal table on the 3.5 kg book that sits at rest is equal to the weight (mg) of the book is 34.335 N.
The weight of the book is equal to 3.5 kg * 9.8 m/s2 = 34.3 N.
Therefore, the normal force (F⃗n) of the table on the book is equal to 34.3 N.
The normal force that a horizontal table exerts on a 3.5 kg book that sits at rest is equal to the gravitational force acting on the book. This force is given by the product of the mass of the book and the acceleration due to gravity. Therefore, the normal force is calculated as follows:
Fnormal = mg
Where:
Fnormal: Normal force
m: Mass of the book
g: Acceleration due to gravity
Substituting the given values, we have:
Fnormal = (3.5 kg)(9.81 m/s²)
Fnormal = 34.335 N
Therefore, the normal force exerted by the table on the book is 34.335 N.
For more such questions on force , Visit:
https://brainly.com/question/12785175
#SPJ11
which of the following are irreversible thermodynamic processes? check all that apply. which of the following are irreversible thermodynamic processes?check all that apply. the slow and adiabatic expansion of a gas the spontaneous flow of heat from a hot body to a cooler body the conversion of work to heat by friction the free expansion of a gas
Answer:
Explanation:
The irreversible thermodynamic processes are:
The conversion of work to heat by friction
The free expansion of a gas
The slow and adiabatic expansion of a gas is a reversible process, while the spontaneous flow of heat from a hot body to a cooler body is a natural, irreversible process, but it is not a thermodynamic process per se.
how hard must she pull downward to raise herself slowly at constant speed? the mass of the person plus the bucket is 77 kg .
The person must pull downward with a force equal to her weight, which is approximately 760 N in order to raise herself slowly at a constant speed.
When the person pulls downward on the bucket, there are two forces acting on the system: the force of gravity pulling the person and the bucket down, and the force of the person pulling the bucket up. In order for the person to raise herself at a constant speed, the force she exerts on the bucket must be equal and opposite to the force of gravity pulling her down.
The force of gravity on the person and the bucket is equal to their combined weight, which can be calculated as mass times gravitational acceleration (77 kg x 9.81 m/s^2 = 755.37 N). Therefore, the person must exert a force equal to her weight (approximately 760 N) in order to counteract the force of gravity and raise herself at a constant speed.
Thus, to lift herself up slowly and steadily, the person needs to exert a downward force that is equivalent to her weight, which is around 760 Newtons.
To know more about gravitational acceleration click here:
https://brainly.com/question/30429836
#SPJ11
what is not an economical operation of a vehicle? applying the brakes smoothly starting the car quickly obeying the speed limit checking for maintenance regularly
The option that is not an economical operation of a vehicle is starting the car quickly. Starting the car quickly will reduce fuel economy, as the engine has to work harder to accelerate the car quickly.
Obeying the speed limit is the most economical way to operate a vehicle, as driving at higher speeds requires more fuel. Checking for maintenance regularly is important for the overall efficiency of a vehicle, as preventive maintenance and timely repairs can keep a vehicle running optimally. Applying the brakes smoothly and obeying the speed limit are both considered economical operations of a vehicle because they can help save fuel and reduce wear and tear on the vehicle, resulting in long-term cost savings.
Learn more about the economical operation of any vehicle: https://brainly.com/question/30576282
#SPJ11
if it takes 1 joule of work to move an object a distance of 1 meter with a force of 1 newton in 10 seconds, what should we expect about the amount of work required to move the same object the same distance but in 10 years
The amount of work required to move the same object the same distance but in 10 years will be the same as before is 1 Joule.
It is known that Work = Force x Distance. So, if it takes 1 Joule of work to move an object a distance of 1 meter with a force of 1 Newton in 10 seconds, we can find the force applied on the object.
The formula for force is:
F = m x a, where m is mass and a is acceleration
F = ma1 N = 1 kg x a
Thus, a = 1 m/s².
Now, we have:
F = 1 N, a = 1 m/s² and d = 1 m.
Putting all values in the formula for work done, we have:
W = F x d
W = 1 N x 1 m
W = 1 J
Thus, the work done to move the object is 1 Joule.
Now, if the object moves the same distance but in 10 years, it would make no difference to the work done. This is because work is calculated using force and distance only, and time does not matter here. Therefore, we can expect the same amount of work required to move the object the same distance.
Learn more about work to move at https://brainly.com/question/25573309
#SPJ11
a planet of mass 4 x 10^14 kg is orbiting a parent star 548 km away. if the star is 83 times the mass of the planet, what speed must the planet have to keep a perfectly circular orbit around the star?
To find the speed of the planet in a perfectly circular orbit around the star, we can use the equation v = sqrt(Gm2 / r). Plugging in the given values, we get v = 1843.3 m/s. Therefore, the planet must have a speed of approximately 1843.3 m/s.
a new block of mass m is used. this block is made of a material that makes an elastic collision with the rod when the block and rod collide. will the hiehgt h increase, decrease, or stay the same?
The height h will stay the same when a new block of mass m is used and makes an elastic collision.
Thus, the correct answer is to stay the same.
What is an elastic collision?An elastic collision is a type of collision in which the total kinetic energy of two or more bodies involved in the collision is conserved. In this collision, the colliding bodies return to their initial state before the collision. That is, the total momentum and kinetic energy are conserved.
As a result, the initial and final energies of the system remain the same, implying that the height of the rod will stay the same as before. So, the height h will stay the same.
For more information about elastic collision refers to the link: https://brainly.com/question/2356330
#SPJ11
if you have an unmarked bar magnet and an identical unmagnetized bar of iron, how can you determine which is the magnet?
Iron that is not magnetic will be drawn to a bar magnet. An atom is like a current loop, if it is not observed than it is a magnet.
A piece of iron, which has magnetic qualities, aligns into two poles when placed in the magnetic field of a bar magnet.
If the north pole reports the side in front of it, it is the north pole, and if the south pole reports the south pole, it is the south pole. A piece of iron, which has magnetic qualities, aligns into two poles when placed in the magnetic field of a bar magnet.
Charges that are in motion within an atom produce electricity. The atoms can act as an equivalent current loop thanks to their rotational orbits. Iron is nevertheless drawn to magnetic fields despite their being no current.
To know more about magnetism, visit,
https://brainly.com/question/12740727
#SPJ4
if you turn on your car headlights during the day, the road ahead of you doesn't appear to get brighter. why not?
If you turn on your car headlights during the day, the road ahead of you doesn't appear to get brighter.
This is because, during the day, the brightness from the sun overwhelms any additional light that would be provided by the headlights. When you turn on your headlights, they produce light that is visible, but during the day, the sun is brighter than the headlights, so the light from the headlights is not sufficient to make the road appear brighter. Besides, the headlights are designed to enhance vision in low-light conditions. As such, they aren't very useful during the day. Additionally, it's important to keep in mind that in some jurisdictions, driving with your headlights on during the day is illegal, so it's important to check your local laws before doing so.
Learn more about headlights at brainly.com/question/24271025
#SPJ11