When you run a column in a less polar solvent and then rerun the same column in a more polar solvent, the spots in the column will move with different distances.
During this process, some of the spots will move with longer distances while others will move with shorter distances.
The spots that move with longer distances will be considered more polar and the spots that move with shorter distances will be considered less polar.
There are several factors that influence the movement of the spots in a column chromatography. The polarity of the solvent is one of the most important factors.
A polar solvent will attract polar compounds, while a nonpolar solvent will attract nonpolar compounds.
The spots in a column chromatography will move with different distances depending on the polarity of the solvent used.
In a less polar solvent, the spots will move with shorter distances because the solvent is not able to dissolve the more polar compounds as efficiently.
a more polar solvent, the spots will move with longer distances because the solvent is able to dissolve the more polar compounds more efficiently.
This is because a more polar solvent has a higher affinity for the polar compounds than a less polar solvent.Overall, the movement of the spots in a column chromatography is determined by the polarity of the solvent used.
When you run a column in a less polar solvent and then rerun the same column in a more polar solvent, the spots in the column will move with different distances.
to know more about solvent refer here:
https://brainly.com/question/30885015#
#SPJ11
if 6.55 g 6.55 g of cuno3 cuno 3 is dissolved in water to make a 0.490 m 0.490 m solution, what is the volume of the solution in milliliters?
The amount of a substance in a specific volume of solution is known as its molarity (M). The number of moles of a solute per liter of a solution is known as molarity. The volume of the solution in milliliters is 69.3 mL.
Since most reactions take place in solutions, it's critical to comprehend how the substance's concentration is expressed in a solution. There are numerous ways to express how many chemicals are in a solution.
The letter M stands for molarity, one of the most often used units of concentration. The number of moles of solute contained in 1 liter of solution is how it is defined.
M = number of moles/volume in L
number of moles = Mass / Molar mass
Molar mass of Cu(NO₃)₂ = 187.55 g/mol
n = 6.55 / 187.55
n = 0.034 mol
0.490 = 0.034 / V
V = 0.0693 L
1 L = 1000 mL
0.0693 L = 69.3 mL
To know more about molarity, visit;
https://brainly.com/question/16587536
#SPJ12
often, right after titrant is added, the drop turns dark pink then disappears after swirling. is the following explanation for this phenomenon true or false? the localized concentration of base from the droplet is higher than the rest of the solution. this causes the indicator to turn pink in that area. after swirling the base disperses and the concentration is constant for the entire solution in the flask, causing the color to change back from pink to colorless.
True. The localized concentration of base from the droplet is higher than the rest of the solution, which is why the indicator turns pink. This phenomenon is known as titration.
Titration or volumetric analysis is a quantitative analytical method used to determine the concentration of a solution of an unknown substance by reacting it with a solution of a known concentration.
Titration includes a controlled reaction between the solution to be tested (the analyte) and the standard solution, which is the titrant. The titrant is typically used to measure the concentration of acids and bases in a sample of a solution.
In a titration, the base or the acid is slowly added to the unknown acid or base, the two are then reacted to form water and salt. The indicator is colorless or a pale color when the titrant is added to the unknown solution.
As the reaction between the titrant and the unknown solution proceeds, the titrant is added dropwise.
If the indicator is added too soon or too much, the solution turns dark pink, as the concentration of the base from the droplet is higher than the rest of the solution.
Learn more about Titration here:
https://brainly.com/question/186765
#SPJ11
write an equation for each acid or base showing its ionization in water, and write the equilibrium constant expression for the weak acid or base
The equation for the ionization of a weak acid in water is HA + H₂O ⇌ H₃O⁺ + A⁻, and the equilibrium constant expression for this reaction is K = [H₃O⁺ ][A⁻]/[HA].
The ionization of a weak base in water is B + H₂O ⇌ OH⁻ + BH+, and the equilibrium constant expression for this reaction is K = [OH⁻][BH⁺]/[B].
Weak acids and bases partially dissociate into their ions in aqueous solutions. For a weak acid, HA, the equilibrium expression for its ionization is HA + H₂O ⇌ H₃O⁺ + A⁻, and the corresponding equilibrium constant expression is K = [ H₃O⁺ ][A-]/[HA].
The same process happens with a weak base, B, where the equilibrium expression is B + H₂O ⇌ OH⁻ + BH⁺, and the corresponding equilibrium constant expression is K = [OH⁻][BH⁺]/[B]. Thus, the equations for the ionization of both weak acids and bases and the corresponding equilibrium constant expressions can be
To know more about equilibrium constant click on below link:
https://brainly.com/question/15118952#
#SPJ11
A scientist collects data that shows the surface around a volcano is swelling a few centimeters. Which conclusion is the scientist most likely to make based on this data?
A. Magma is becoming more active underneath the volcano, which could lead to an eventual eruption. B. A volcanic eruption cannot occur within the next 30 days. C. A volcanic eruption of lava will definitely occur within the next 24 hours. D. Magma is becoming less active underneath the volcano, which means there is no possible eruption
Magma is becoming more active underneath the volcano, which could lead to an eventual eruption. Option A is the correct choice.
If the surface around a volcano is swelling, it indicates that there is an increase in pressure from magma rising beneath the surface. This is often a sign of increased volcanic activity, which can eventually lead to an eruption. A few centimeters of swelling may not necessarily indicate an imminent eruption, but it does suggest that the magma is becoming more active and may lead to an eruption in the future.
Therefore, the most likely conclusion that the scientist would make based on this data is that magma is becoming more active underneath the volcano, which could lead to an eventual eruption. Therefore, option A is correct.
To know more about magma, here
brainly.com/question/16940653
#SPJ4
What is the value of the gas constant, R, in units of L atm/mol K? Report the value with at least three significant figures.
The value of the gas constant, R, in units of L atm/mol K is 0.0821 L atm/mol K.
What is the gas constant, R?The ideal gas law is described by the ideal gas equation,
PV = nRT,
which expresses the relationship between pressure, volume, temperature, and the number of moles of gas.
The gas constant, R, is a constant that relates these variables for a given quantity of an ideal gas at constant pressure and volume. Its value depends on the units used to express pressure, volume, temperature, and the number of moles of gas.
For the most common units, R has a value of 0.0821 L atm/mol K. This is equivalent to 8.31 J/mol K or 1.99 cal/mol K. The value of R is often used in solving problems involving the ideal gas law, such as determining the pressure, volume, or temperature of a gas sample under different conditions.
To learn more about gas refer: https://brainly.com/question/30859506
#SPJ11
considering the trends in ionization energies, would you expect sodium or potassium to be more reactive?
When considering the trends in ionization energies, we would expect: potassium to be more reactive than sodium.
This is due to the fact that potassium has a lower ionization energy than sodium. Because potassium is larger and has more electron shielding than sodium, its valence electron is more easily removed. This is the cause of the lower ionization energy for potassium.
The amount of energy required to remove an electron from a neutral atom is referred to as ionization energy. Low ionization energy implies that the element's valence electrons are more readily removed, indicating that it is more reactive. Because potassium has a lower ionization energy than sodium, it is more reactive than sodium.
Taking a closer look at potassium and sodium, we can see that potassium is in group 1 of the periodic table, whereas sodium is in group 2. As we go down a group in the periodic table, ionization energies typically decrease. This is because the number of electron shells increases, making it easier for electrons to be removed.
Potassium, as a result, has a lower ionization energy than sodium, making it more reactive.
To know more about potassium refer here:
https://brainly.com/question/8507057#
#SPJ11
you have been called to the site of an overturned railroad tank car leaking potassium hydroxide. your task is to determine the corrosivity of the spill. the best monitoring equipment for the job is a:
The best monitoring equipment for determining the corrosivity of a potassium hydroxide spill is a pH meter.
A pH meter is a device that measures the acidity or alkalinity of a solution and provides a numerical value from 0 to 14. A pH value of 7 is neutral, while a pH below 7 is acidic and a pH above 7 is basic (alkaline).
Potassium hydroxide is a strong alkali with a pH value of approximately 13. This means it can corrode metals, concrete, and other materials it comes in contact with.
By measuring the pH of the spill, we can determine how corrosive it is and take the necessary steps to mitigate the corrosive effects. It is important to note that corrosion is not the same as toxicity.
Corrosion can cause serious damage, but the effects can often be reversed with proper mitigation and cleaning.
In order to measure the pH of a potassium hydroxide spill, it is important to use a pH meter with a temperature probe. This is because the pH of a solution can vary with temperature.
The pH meter should also be calibrated correctly before use, as incorrect readings can lead to incorrect conclusions.
After the pH meter is in place, readings can be taken of the spill and compared to a baseline reading from an uncontaminated sample in order to determine the level of corrosivity of the spill.
Appropriate actions can then be taken to mitigate the corrosive effects.
to know more about corrosivity refer here:
https://brainly.com/question/30057568#
#SPJ11
if you have a sugar with a molecular weight of 62 g/mol, how many grams would you need to add to 110 ml of water to create a 173 mm solution?
The amount of sugar that you would need to add to 110 ml of water to create a 173 mM solution is 1.17986 grams.
In chemistry, molarity is a measure of the concentration of a solute in a solution. Molarity is usually expressed in moles per liter (M) and is the number of moles of a solute present in a liter of solution. The molarity of a solution is calculated by dividing the number of moles (n) of a solute by the volume (v) of the solution.
M = n/v
When a solution is created, the amount of solute required is determined by the desired molarity of the solution. For instance, if you wanted to create a 173 mM solution, you would need to know the molecular weight (MW) of the solute and the volume of the solution.
n = mass/MW
Combining the two equations, we can solve for the mass using the equation:
mass = n(MW) = M(v)(MW)
Plugging in the values, we get:
Amount of sugar = 173 mM(110 mL)(62 g/mol)
Amount of sugar = 173 x 10⁻³ M(110 mL)(62 g/mol)(1L/1000mL)
Amount of sugar = 1.17986 grams
Therefore, adding 1.17986 grams of sugar to 110 mL of water will create a 173 mM solution.
Learn more about molarity here: https://brainly.com/question/14469428.
#SPJ11
which two gases are primarily responsible for the greenhouse effect because of their ability to absorb infrared energy?
The two primary gases responsible for the
greenhouse effect
are carbon dioxide (CO2) and water vapor (H2O). They absorb infrared energy, which is a type of energy that is emitted from the Earth's surface, and trap it in the atmosphere.
This energy can't escape, which causes the atmosphere to warm up, resulting in the greenhouse effect.
The greenhouse effect is a natural process that helps to keep the Earth's temperature relatively stable, which is important for life.
The amount of CO2 and H2O in the atmosphere are regulated by natural processes, such as respiration and
photosynthesis
,
but human activities, such as burning fossil fuels and deforestation, have caused these levels to increase significantly over the past few decades.
This has resulted in a further increase in the temperature of the atmosphere, leading to climate change.
CO2 absorbs more infrared energy than other gases, but H2O also plays an important role in the greenhouse effect.
H2O exists in the atmosphere in both vapor and liquid forms, and is able to absorb and trap heat energy more effectively than CO2.
H2O also has the ability to reflect incoming sunlight, which further helps to keep the temperature of the atmosphere warm.
CO2 and H2O are the two primary gases responsible for the greenhouse effect because of their ability to absorb infrared energy and trap heat in the atmosphere.
These two gases are essential for regulating the temperature of the Earth and maintaining the climate.
Human activities have caused their levels to increase, resulting in a further increase in the temperature of the atmosphere and leading to climate change.
to know more about
greenhouse effect
refer here:
https://brainly.com/question/13706708#
#SPJ11
what will be the ph of a buffer solution prepared from 0.20 mol nh3, 0.40 mol nh4no3, and just enough water to give 1.00 l of solution?
The pH of the buffer solution is approximately 8.95.
To find the pH of the buffer solution, we'll use the Henderson-Hasselbalch equation:
pH = pKa + log ([A-]/[HA])
Here, [A-] is the concentration of NH3 (base), and [HA] is the concentration of NH4+ (conjugate acid). First, we need to find the pKa of NH4+. The pKa is the negative logarithm of the Ka (acid dissociation constant) value. For NH4+, the Ka value is 5.56 x 10^-10.
Step 1: Find pKa
pKa = -log(Ka) = -log(5.56 x 10^-10) = 9.25
Step 2: Find the concentration of NH3 and NH4+
[NH3] = 0.20 mol / 1.00 L = 0.20 M
[NH4+] = 0.40 mol / 1.00 L = 0.40 M
Step 3: Use the Henderson-Hasselbalch equation
pH = 9.25 + log(0.20/0.40) = 9.25 - 0.301 = 8.949
For more question on buffer solution click on
https://brainly.com/question/27371101
#SPJ11
why is molality used as a concentration scale in this experiment and not the more common concentration scale of molarity?
Molality is used as a concentration scale in this experiment instead of molarity because it is not affected by temperature changes.
Molarity is a measure of the number of moles of a substance dissolved in a liter of solution, and its value can vary with temperature changes. On the other hand, molality is a measure of the number of moles of solute per kilogram of solvent and is not affected by temperature changes. This makes it a better choice of concentration scale in experiments where temperature fluctuations could otherwise affect the accuracy of results.
In this experiment, molality is used to ensure accurate results. By using molality instead of molarity, the experimenter is able to account for temperature changes that could affect the outcome of the experiment, resulting in a more reliable and accurate set of results.
Thus, Molality is used as a concentration scale in this experiment instead of molarity to avoid temperature-related discrepancies.
To know more about Molality, refer here:
https://brainly.com/question/26921570#
#SPJ11
an unknown weak acid with a concentration of 0.058 m has a ph of 1.80. what is the ka of the weak acid?
Answer: The Ka of the weak acid with a concentration of 0.058 m and a pH of 1.80 is 0.0016.
The Ka of a weak acid is the product of the concentration of the hydrogen ion and the concentration of the conjugate base, divided by the concentration of the weak acid. The Ka of an unknown weak acid with a concentration of 0.058 m and a pH of 1.80 can be calculated as follows:
Ka = ([H+]*[A-])/[HA]
Ka = (10^(-1.8)*10^(-1.8))/0.058
Ka = 0.0016
Therefore, the Ka of the weak acid with a concentration of 0.058 m and a pH of 1.80 is 0.0016.
Learn more about acids here:
https://brainly.com/question/29796621#
#SPJ11
A mole of copper atoms has more atoms than a mole of lead atoms.
(a) True
(b) False
The given statement "A mole of copper atoms has more atoms than a mole of lead atoms," is false beacuse a mole of copper atoms and a mole of lead atoms both contain the same number of atoms.
A mole of any substance contains the same number of particles, which is approximately particles, also known as Avogadro's number. This number is a constant that does not change based on the identity of the substance.
Therefore, a mole of mole of copper atoms and a mole of lead atoms both contain the same number of atoms, which is approximately atoms. The mass of a mole of copper atoms and a mole of lead atoms would be different because the atomic mass of copper and lead is different. Copper has an atomic mass of 63.55 g/mol while lead has an atomic mass of 207.2 g/mol.
To learn more about Avogadro's number refer: brainly.com/question/11907018
#SPJ11
what is the formula for the ionic compound formed by calcium and selenium? group of answer choices case case2 case3 ca2se ca3se
Answer: CaSe
Explanation:
Step 1: Ca has a +2 charge as a cation. Se has a -2 charge as an anion.
Ca²⁺ Se²⁻
Step 2: Use the "swap and drop" method. Swap the numbers on each ion and then drop them as subscripts. Omit the + and -.
Ca₂Se₂
Step 3: When the subscripts are the same, you can omit them and write the answer as CaSe.
The correct answer is option a) CaSe.
Ionic compounds are formed when a metal and a non-metal react.
In this case, calcium is a metal and selenium is a non-metal. This reaction forms a cation (positively charged ion) of calcium and an anion (negatively charged ion) of selenium.
The formula for the compound is the combination of the symbols of the two elements with the charges balanced. Since calcium is a +2 cation and selenium is a -2 anion, the compound's formula is CaSe.
Therefore, the formula for the ionic compound formed by calcium and selenium is CaSe.
To know more about calcium, refer here:
https://brainly.com/question/4023397#
#SPJ11
why the net ionic equation for the neutraliza-
tion reaction of any strong acid with any strong base
is always the same.
Answer:
The net ionic equation for the neutralization reaction of any strong acid with any strong base is always the same because both the strong acid and the strong base completely dissociate in water into their respective ions, and the reaction between them always results in the formation of water and a salt.
For example, when hydrochloric acid (HCl) is neutralized by sodium hydroxide (NaOH), the following reaction occurs:
HCl (aq) + NaOH (aq) → NaCl (aq) + H2O (l)
In this reaction, both HCl and NaOH completely dissociate into their respective ions in water:
HCl (aq) → H+ (aq) + Cl- (aq)
NaOH (aq) → Na+ (aq) + OH- (aq)
The net ionic equation for this reaction is:
H+ (aq) + OH- (aq) → H2O (l)
As you can see, the net ionic equation is the same for any strong acid and any strong base, since the reaction always involves the combination of H+ and OH- ions to form water. The identity of the cations and anions in the salt formed will vary depending on the specific acid and base used, but the overall reaction and the resulting net ionic equation will always be the same.
Mark me as brainliest!
select a mineral, rock, or gemstone from the united state and explain why you selected it. discuss how the mineral, rock, or gemstone you selected is used in everyday life, and the processes by which they formed.
Answer: I have selected the gemstone turquoise from the United States. Turquoise is a semi-precious gemstone composed of copper aluminum phosphate. It is found in the deserts of Nevada, Arizona, Colorado, and New Mexico. Turquoise has a long history of use, with some pieces found in Ancient Egyptian tombs and Native American jewelry. Turquoise is still used today for making jewelry, figurines, and inlays for furniture. It is also often used to decorate clothes and other items.
Turquoise is created through the process of sedimentary precipitation, which involves the accumulation of minerals in slow-moving water. This process takes thousands of years, and is further shaped by the elements, such as air and water, which break down the mineral and change its color. It can also be artificially altered to improve its color.
In everyday life, turquoise is primarily used for jewelry, but it is also thought to possess healing properties. In some cultures, turquoise is believed to bring good luck and is used to ward off evil spirits. Turquoise has been a popular choice for making jewelry and decorative objects since ancient times. It is a beautiful, vibrant gemstone with a wide range of colors and patterns, which makes it a highly sought after material.
Learn more about minerals here:
https://brainly.com/question/18078524#
#SPJ11
at a particular temperature, the solubility of no in water is 0.090 m when the partial pressure is 0.80 atm. what partial pressure (in atm) of no would give a solubility of 0.060 m?
Solubility: The maximum amount of solute that can be dissolved in a solvent at a given temperature and pressure is called solubility.
Partial Pressure: The pressure that a gas exerts when it is present in a mixture of gases is called partial pressure.
The given solubility of NO in water is 0.090 m and the partial pressure is 0.80 atm. We need to find the partial pressure required for the solubility of NO to be 0.060 m.
Hence, let's find the relationship between solubility and partial pressure.
The relationship between solubility and partial pressure can be given as, Henry's Law:
S = KP
Where, S is the solubility of the gas in solution,
P is the partial pressure of the gas above the solution, and
K is Henry's Law constant.
Let's apply the given values to Henry's Law to find the value of
K.0.090 m = K (0.80 atm)
K = 0.090 m / 0.80 atm
K = 0.1125 m/atm
Now, let's find the partial pressure required for the solubility of NO to be 0.060 m using Henry's Law.
0.060 m = (0.1125 m/atm) P
So, the partial pressure required for the solubility of NO to be 0.060 m is 0.53 atm.
Learn more about solubility: https://brainly.com/question/9098308
#SPJ11
if the rf value of an amino acid is 0.50, how far would it travel on a chromatography strip where the solvent traveled 65.8 mm?
The amino acid will travel 32.9 mm on the chromatography strip whose retention factor (Rf) = 0.50.
The Rf (Retention Factor) value of an amino acid is a measure of its distance traveled on a chromatography strip compared to the distance traveled by the solvent.
To calculate the distance traveled, we use the formula:
Rf = distance traveled by the amino acid/distance traveled by the solvent.
In this case, the Rf value is 0.50 and the distance traveled by the solvent is 65.8 mm.
Therefore, the distance traveled by the amino acid is 0.50 x 65.8 mm = 32.9 mm.
It is important to remember that Rf values are relative, meaning that a higher Rf value represents a higher distance traveled compared to the solvent. In this case, since the RF value is 0.50, the amino acid traveled a lower distance than the solvent.
In conclusion, the amino acid will travel 32.9 mm (0.50 x 65.8 mm) on the chromatography strip where the solvent traveled 65.8 mm and the Rf is 0.50.
To know more about retention factors, refer here:
https://brainly.com/question/23286912#
#SPJ11
For the incomplete Reaction (below), the mass of the missing product should be...
) -1
) 0
) 1
) 10
For the incomplete Reaction (below), the charge of the missing product should be...
) -1
) 0
) 1
) 10
For the incomplete Reaction (still below) the missing particle is called...
- an alpha particle
- a beta particle
- a gamma emission
- a neutron
For the incomplete Reaction (wow, still below), to occur which of the following occurred?
- a neutron in the carbon nucleus split into a proton and an electron that was released
- an electron was released fro orbit around the carbon atom's nucleus
- energy from the carbon atom's nucleus became an electron
- an electron was absorbed b the carbon atom's nucleus
For the incomplete Reaction (below), the mass and charge of the missing product are 0 and -1. The missing product is a beta particle where a neutron in the carbon nucleus split into a proton and an electron that was released.
What is beta particle emission?Beta particle emission, also known as beta decay, is a type of radioactive decay in which a beta particle is emitted from the nucleus of an atom.
A beta particle is a high-energy, high-speed electron or positron that is released from the nucleus as a result of the transformation of a neutron into a proton or a proton into a neutron.
Learn more about beta particles at: https://brainly.com/question/24312947
#SPJ1
the pressure on a balloon holding 433 ml of an ideal gas is increased from 688 torr to 1.00 atm. what is the new volume of the balloon (in ml) at constant temperature?
Answer:
pressure on a balloon holding 433 ml of an ideal gas is increased from 688 torr to 1.00 atm. what is the newpressure on a balloon holding 433 ml of an ideal gas is increased from 688 torr to 1.00 atm. what is the new volume of the balloon (in ml) at constant temperature
calculate each of the following quantities in 0.160 mol of C6H14O. calculate the number of atoms of H. calculate the number of atoms of C.
Answer:
To calculate the number of atoms of H and C in 0.160 mol of C6H14O, we need to first determine the number of moles of each element present in C6H14O.
The molecular formula of C6H14O shows that there are 6 carbon atoms, 14 hydrogen atoms, and 1 oxygen atom in each molecule of C6H14O.
The molar mass of C6H14O can be calculated as:
Molar mass of C6H14O = (6 × atomic mass of C) + (14 × atomic mass of H) + (1 × atomic mass of O)
= (6 × 12.01 g/mol) + (14 × 1.01 g/mol) + (1 × 16.00 g/mol)
= 86.18 g/mol
Therefore, 0.160 mol of C6H14O has a mass of:
Mass = molar mass × number of moles
= 86.18 g/mol × 0.160 mol
= 13.79 g
Now we can calculate the number of atoms of H and C in 0.160 mol of C6H14O.
Number of atoms of H:
Number of moles of H = 14 × 0.160 mol = 2.24 mol
Number of atoms of H = 2.24 mol × Avogadro's number
= 2.24 mol × 6.022 × 10^23/mol
= 1.35 × 10^24 atoms of H
Therefore, there are 1.35 × 10^24 atoms of hydrogen in 0.160 mol of C6H14O.
Number of atoms of C:
Number of moles of C = 6 × 0.160 mol = 0.96 mol
Number of atoms of C = 0.96 mol × Avogadro's number
= 0.96 mol × 6.022 × 10^23/mol
= 5.78 × 10^23 atoms of C
Therefore, there are 5.78 × 10^23 atoms of carbon in 0.160 mol of C6H14O.
Explanation:
The diagram shows the cycling of matter in the interior of Earth.
Which statement correctly explains the cycling of matter in the interior of Earth?
Responses
The heat from Earth’s core causes material in the area under the crust to become less dense and rise, while more dense material sinks.
The heat from Earth’s core causes material in the area under the crust to become less dense and rise, while more dense material sinks.
The heat from Earth’s core causes material in the area under the crust to become more dense and rise, while less dense material sinks.
The heat from Earth’s core causes material in the area under the crust to become more dense and rise, while less dense material sinks.
The heat from Earth’s core causes material in the area under the crust to become less dense and sink, while more dense material rises.
The heat from Earth’s core causes material in the area under the crust to become less dense and sink, while more dense material rises.
The heat from Earth’s core causes material in the area under the crust to become more dense and sink, while less dense material rises.
The heat from Earth’s core causes material in the area under the crust to become more dense and sink, while less dense material rises.
Answer:
Explanation:
I think 'The heat from Earth's core causes material in the area under the crust to become denser and rinse, while less dense material sinks.
how much volume in ml will you need to take from 3.8 m concentrated stock solution if you would like to prepare a diluted 0.9 solution with 100 ml? report and round your answer to a whole integer.
You will need to take 24 mL of the concentrated solution and add it to 76 mL of solvent to prepare 100 mL of a 0.9 M diluted solution.
The given data is as follows:
concentrated stock (C1)= 3.8 m
diluted solution (C2) = 0.9 m
Total available solution (V2)= 100ml
To find out the volume of the concentrated solution needed, we must use the formula
V1 x C1 = V2 x C2
By substituting the values we can get,
V1 x 3.8 M = 100 mL x 0.9 M
V1 = (100 mL x 0.9 M) / 3.8 M
V1 = 23.68 mL
Rounding to the nearest whole integer as mentioned we get:
V1 = 24 mL
Therefore, we can conclude that you will need to take 24 mL of the concentrated solution.
To learn more about Chemical Solutions
https://brainly.com/question/13182946
#SPJ4
Give two reasons why meteorological seasons were needed?
The four traditional meteorological seasons, which are based on the annual temperature cycle and the location of the Earth in its orbit around the sun, split the year into four seasons of three months each. The following describes these seasons:
Spring: March, April, MaySummer: June, July, AugustFall (or Autumn): September, October, NovemberWinter: December, January, FebruaryHere are two reasons why meteorological seasons were needed:
Consistency: Based on the annual temperature cycle, meteorological seasons offer a consistent method of dividing the year into four separate times. This makes it simple to compare weather patterns from one year to the next and to monitor long-term weather pattern changes over time.
Ease of communication: By dividing the year into four seasons based on set calendrer months, it is simpler for people to discuss the weather and make appropriate plans for their daily activities. Because January falls within the winter season according to the meteorological calendar, it is simple to know what kind of weather to anticipate when someone states, "I'm going skiing in January."
Learn more about meteorological ,
https://brainly.com/question/14243944
#SPJ4
the osmotic pressure of an aqueous solution of 3.08 m kcl is 1.36 atm. what concentration would be necessary create an aqueous solution of ca(no3)2 with the same osmotic pressure? (assume temperature is constant)
The concentration required for the same osmotic pressure is 0.019 molL⁻¹.
The osmotic pressure of an aqueous solution is determined by the concentration of the solute particles present in the solution. To create an aqueous solution of Ca(NO₃)₂ with the same osmotic pressure as 3.08m KCl (1.36 atm), we must first determine the molarity of the solution.
The osmotic pressure can be calculated using the Van 't Hoff equation:
Osmotic Pressure (Π) = iMRT
where i is the Van 't Hoff factor (3 for Ca(NO₃)₂, as it dissociates into 3 ions), M is the molarity of the solution, R is the ideal gas constant (0.0821 L•atm•mol-1•K-1), and T is the absolute temperature (in Kelvin).
Thus, we can rearrange the equation to solve for M:
M = Π/(iRT).
Plugging in the values for Π (1.36 atm), i (3), R (0.0821 L•atm•mol⁻¹•K⁻¹), and T (298K), we get:
M = 1.36/(3*0.0821*298)
M = 0.019 molL⁻¹.
Thus, 0.019 molL⁻¹ is the molarity of the Ca(NO₃)₂ solution that would be necessary to create an aqueous solution with the same osmotic pressure of 1.36 atm as the 3.08m KCl solution.
To know more about osmotic pressure, refer here:
https://brainly.com/question/29823250#
#SPJ11
if 626 ml of a 0.110m lead ii nitrate soloution is reacted with 429 ml of a 3.4 m potassium iodide soloution how many grams of percipitate can be produced
20,908.6 g of precipitate were generated.
Lead (II) nitrate and Potassium iodide react to form Lead (II) iodide and Potassium nitrate.For this reaction, the chemical equation is balanced as follows:
[tex]2 Pb(NO_3)_2 + 2 KI \rightarrow 2 PbI_2 + 2 KNO_3[/tex]
To calculate the amount of precipitate produced, we first need to calculate the amount of moles of Lead (II) nitrate and Potassium iodide.
Amount of Lead (II) nitrate = 626 mL x (0.110 mol/L) = 68.86 mol
Amount of Potassium iodide = 429 mL x (3.4 mol/L) = 1458.6 mol
Since the reaction has a 2:2 mole ratio, the amount of moles of Lead (II) iodide produced is 68.86 mol.
Now, we can calculate the mass of the precipitate produced.
Mass of precipitate = 68.86 mol x (303.4 g/mol) = 20,908.6 g
Therefore, the amount of precipitate produced is 20,908.6 g.
learn more about precipitate Refer:brainly.com/question/30904755
#SPJ1
which of the following is true of a hydrocarbon? group of answer choices it consists of carbon and hydrogen atoms. it can form a ring structure. it is a good fuel for combustion reactions. it can contain double or triple bonds. all of these
The following is true of a hydrocarbon is e. All of these
Hydrocarbon compounds are the simplest carbon compounds composed of carbon and hydrogen atoms that can form ring structures, are used as fuel for combustion reactions, and contain double or triple bonds.
The common characteristics of hydrocarbons are that they produce steam, carbon dioxide, and heat during combustion, and oxygen is required for the combustion reactions to occur. This compound is used as a fuel source. In everyday life we encounter many carbonate compounds, such as kerosene, gasoline, natural gas, and plastics. Other types of hydrocarbons such as propane and butane are used in Liquified Petroleum Gas and some materials for making medicine and clothing.
Learn more about hydrogen at:
https://brainly.com/question/29765115
#SPJ11
given that burning a 1 gram carbohydrate sample raised the temperature of the 500 gram water bath by 8oc, calculate how much heat energy was released by the carbohydrate sample.
The burning of 1 gram carbohydrate release 16,736 J of heat energy.
Burning a 1 gram carbohydrate sample raised the temperature of the 500 gram water bath by 8°C, to calculate how much heat energy was released by the carbohydrate sample, we can use the specific heat capacity of water which is 4.18 J/g°C.
The heat energy released by the carbohydrate sample can be calculated using the following equation:
Heat energy (J) = mass of water (g) × specific heat capacity of water × ΔTHeat energy
In this case, the calculation is as follows:
Heat energy (J) = 500 g x 8°C x 4.184 = 16,736 J
Therefore, burning a 1 gram carbohydrate sample raised the temperature of the 500 gram water bath by 8°C and released 16,736 J of heat energy.
Learn more about heat energy: https://brainly.com/question/878982
#SPJ11
A 100 milliliter sample of 0.100-molar NH4Cl solution was added to 80 milliliters of a 0.200-molar solution of NH3. The value of Kb for ammonia is 1.79 x 10^-5.
- What is the pH of the solution
- Some NaOH is added to the solution but the pH barely changes. write the reaction that explains this
- What is the pH of a solution with equal amounts of NH4Cl and NH3?
The pH of the solution is 9.95.
The reaction that explains this is given as NH4+ + OH- → NH3 + H2O
The pH of a solution with equal amounts of NH4Cl and NH3 is 12.21.
Determining the pH of the solutionTo solve this problem, we need to first write out the balanced chemical equation for the reaction between NH4Cl and NH3:
NH4Cl + NH3 ⇌ NH4+ + NH2Cl
Next, we need to write out the equilibrium expression:
Kb = [NH4+][OH-]/[NH3]
Since we are given the concentration of NH4Cl and NH3, we can use the initial concentrations to calculate the equilibrium concentrations of NH4+, NH2Cl, and NH3:
[NH4+] = 0.1 M × (0.1 L / 0.18 L) = 0.056 M
[NH2Cl] = 0.056 M
[NH3] = 0.2 M × (0.08 L / 0.18 L) = 0.089 M
Using the equilibrium expression and the value of Kb, we can solve for the concentration of hydroxide ions:
Kb = [NH4+][OH-]/[NH3]
1.79 × 10^-5 = (0.056 M)(x) / (0.089 M)
x = 1.13 × 10^-5 M
Finally, we can use the concentration of hydroxide ions to calculate the pH of the solution:
pH = 14 - pOH = 14 - (-log10(1.13 × 10^-5)) = 9.95
Therefore, the pH of the solution is 9.95.
If some NaOH is added to the solution but the pH barely changes, it means that the added NaOH is being neutralized by the NH4+ ions in the solution, forming more NH3 and water:
NH4+ + OH- → NH3 + H2O
This reaction helps to buffer the pH of the solution.
To calculate the pH of a solution with equal amounts of NH4Cl and NH3, we can use the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
where A- is the conjugate base of the acid, NH4+, and HA is the acid, NH3.
The pKa of NH4+ is given by:
pKa = pKw - pKb = 14 - 1.79 = 12.21
At the halfway point, the concentration of NH4+ and NH3 are equal:
[NH4+] = [NH3]
Substituting these values into the Henderson-Hasselbalch equation, we get:
pH = 12.21 + log(1) = 12.21
Therefore, the pH of a solution with equal amounts of NH4Cl and NH3 is 12.21.
Learn more about pH values here https://brainly.com/question/172153
#SPJ1
what is the concentration of fecl3in a solution prepared by dissolving20.0 g of fecl3in enoughwater to make 275 ml of solution?
The concentration of FeCl₃ is 0.447M.
To calculate this, we must first determine the number of moles of FeCl₃ in the solution. The molar mass of FeCl₃ is 162.2 g/mol, so the number of moles of FeCl₃ is (given weight)/(Molar mass) =0.123 moles.
Next, we need to calculate the total volume of the solution, which is given= 275 mL.
To calculate the concentration, we divide the number of moles of FeCl₃ (0.123 moles) by the total volume of the solution (275 mL). We can then convert mL to L by dividing by 1000, so the total volume of the solution is 0.275 L.
This gives us a concentration of:
Concentration= (No. of moles)/(Volume in L)
=(0.123 moles/0.275 L)
=0.447M
Therefore, The concentration of FeCl₃ in a solution prepared by dissolving 20.0 g of FeCl3 in enough water to make 275 mL of solution is 0.447M.
To know more about FeCl₃, refer here:
https://brainly.com/question/28299457#
#SPJ11