You want to have a barbecue this weekend! But you're worried about global warming. You only want to release a maximum of 0.750 kg of carbon dioxide from your propane grill. Using the below equation to answer the following questions.

CH3(g) + 5O2(g) → 3CO2(g) + 4H2O(g)

ΔHrxn = -2220.1 kJ

a. How many kilojoules will you be able to release?

b. If it requires 1900 kJ to cook one hamburger, how many hamburgers can you cook?

The density of the gas is  0.0340 g/L, moles of gas in the bulb is 0.00124 mol and apparent molar mass is 111.3 g/mol.

To determine the density of the gas, use the ideal gas law:

PV = nRT

where P = pressure, V = volume, n = number of moles, R = gas constant, and T = temperature.

Since the volume and temperature are constant:

(P/n) = constant

Therefore, the density (ρ) of the gas is given by:

ρ = (m-m₀)/V = (Δm)/V

where m = mass of the bulb filled with the gas, m₀ = mass of the evacuated bulb, and Δm = m - m₀ is the mass of the gas.

Substituting the given values:

Δm = 22.651 g - 22.513 g = 0.138 g

V = 4.050 L

ρ = 0.138 g / 4.050 L = 0.0340 g/L

To find the number of moles of gas in the bulb, use the equation:

n = PV/RT

Substituting the given values:

n = (0.0250 atm)(4.050 L) / (0.0821 L·atm/mol·K)(289.2 K) = 0.00124 mol

Finally, to find the apparent molar mass of the gas, use the equation:

M = m/n

where M = molar mass of the gas and m = mass of the gas.

Substituting the given values:

M = 0.138 g / 0.00124 mol = 111.3 g/mol

Therefore, the density of the gas is 0.0340 g/L, there are 0.00124 mol of gas in the bulb, and the apparent molar mass of the gas is 111.3 g/mol.

Find out more on molar mass here: https://brainly.com/question/31600958

#SPJ1

The given answer statement  "there is no aluminum left" and " limiting reactants is aluminum" are correct.

In the analysis of Trial 2, it was found that there was no aluminum left after the reaction had taken place. This indicates that all of the aluminum had reacted with the copper (II) chloride and that it was the limiting reactant in the reaction.

To confirm this, the mass of each reactant was converted to moles using their respective molar masses. It was found that the aluminum had a smaller number of moles than the copper (II) chloride, indicating that it would be used up first and thus be the limiting reactant.

Therefore, the limiting reactant in Trial 2 was aluminum.

To learn more about limiting reactants  here

https://brainly.com/question/14225536

#SPJ1

The mass of the silver block, given that it was initially at 55.1 °C  and is submerged into 100.0 g of water at 25.0°C is 189.8 g

We'll begin our calculation by obtaining the heat absorbed by the water. Details below:

Q = MCΔT

Q = 100 × 4.184 × 2.9

Q = 1213.36 J

Finally, we shall determine the mass of the silver block. Details below:

Q = MCΔT

-1213.36 = M × 0.235 × -27.2

-1213.36 = M × -6.392

Divide both sides by -6.392

M = -1213.36 / -6.392

M = 189.8 g

Thus, we can conclude that the mass of the silver block is 189.8 g

Learn more about mass:

https://brainly.com/question/1674804

#SPJ1

Complete question:

A silver block, initially at 55.1∘C, is submerged into 100.0 g of water at 25.0∘C in an insulated container. The final temperature of the mixture upon reaching thermal equilibrium is 27.9∘C. The specific heat capacities for water and silver are Cs,water = 4.18J/(g⋅∘C) and Cs, silver = 0.235J/(g⋅∘C). What is the mass of the silver block?

Answer:

(a) The formal charge of Cl in the hypochlorite ion (ClO-) is +1.

(b) The formal charge of Cl in the perchlorate ion (ClO4-) with single bonds is +3.

For chlorine (Cl):

Valence electrons: 7

Non-bonding electrons: 6 (3 lone pairs)

Bonding electrons: 2 (1 single bond with oxygen)

Formal charge of Cl = 7 - 6 - (1/2 * 2) = 7 - 6 - 1 = +1

Hence, the formal charge of Cl in the hypochlorite ion is +1.

(c) The oxidation number of Cl in the hypochlorite ion is +1.

(d) The oxidation number of Cl in the perchlorate ion with single bonds is +7.

(e) In a redox reaction, the hypochlorite ion (ClO-) would be more easily reduced because it has a lower oxidation number (+1) compared to the perchlorate ion (+7).

Read more about oxidation number here:

https://brainly.com/question/27239694

#SPJ1

The minimum concentration of fluoride ions needed is 2.726 x 10⁻⁴ M.

To find the minimum concentration of fluoride ions needed to precipitate CaF₂, we'll use the solubility product constant (Ksp) and the calcium ion concentration.

Ksp = [Ca²⁺][F⁻]²

Given: [Ca²⁺] = 5.25 x 10⁻³ M, Ksp = 3.9 x 10⁻¹¹

3.9 x 10⁻¹¹ = (5.25 x 10⁻³)[F⁻]²

Solve for [F⁻]:

[F⁻]² = (3.9 x 10⁻¹¹) / (5.25 x 10⁻³)

[F⁻]² = 7.4286 x 10⁻⁹

[F⁻] = 2.726 x 10⁻⁴ M

The minimum concentration of fluoride ions needed is 2.726 x 10⁻⁴ M.

Read more about concentration here:

https://brainly.com/question/17206790

#SPJ1

To calculate the amount of heat energy needed to cause the rise in temperature, you can use the formula:
Q = mcΔT

Where Q represents the heat energy, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.
Given:
m = 100 grams
c = 4.18 J/g°C
Initial temperature (T1) = 4°C
Final temperature (T2) = 37°C
First, find the change in temperature (ΔT):
ΔT = T2 - T1 = 37°C - 4°C = 33°C
Now, plug the values into the formula:
Q = (100 g) × (4.18 J/g°C) × (33°C)
Q = 13794 J

So, the amount of heat energy needed to cause this rise in temperature is 13,794 Joules.

For more questions on:energy

https://brainly.com/question/13881533

#SPJ11

Answer:

9.98%

Explanation:

To find the percent of NaCl in the mixture, we need to divide the mass of NaCl by the total mass of the mixture, and then multiply by 100 to express it as a percentage.

Step 1: Find the total mass of the mixture

total mass = mass of NaCl + mass of water

total mass = 23.5 g + 212 g

total mass = 235.5 g

Step 2: Calculate the percent of NaCl

% NaCl = (mass of NaCl / total mass) x 100

% NaCl = (23.5 g / 235.5 g) x 100

% NaCl = 0.0997876857 x 100

% NaCl = 9.978768677%

% NaCl = 9.98%

Therefore, the percent of NaCl in the mixture is 9.98%.

Answer:

a. Cl2 (g) + 2NaI (aq) → 2NaCl (aq) + I2 (s)

b. 2NaClO3 (s) → 2NaCl (s) + 3O2 (g)

c. 2K (s) + 2H2O (l) → 2KOH (aq) + H2 (g)

Explanation:

Answer: Cells

Explanation:

The hydrocarbon's molecular structure is [tex]C_9H_20[/tex].The hydrocarbon's empirical formula is [tex]C_9[/tex]/4H5.

To solve this problem, we need to use stoichiometry to relate the amount of [tex]CO__2[/tex] and [tex]H_2O[/tex] produced to the amount of [tex]CxHy[/tex] burned.

(a) To find the molecular formula of the hydrocarbon, we need to first calculate the number of moles of [tex]CO__2[/tex] and [tex]H_2O[/tex] produced. From the ideal gas law, we know that 1 mole of gas at STP (standard temperature and pressure) occupies 22.4 L. Therefore, 4.032 L of [tex]CO__2[/tex] at STP corresponds to:

4.032 L / 22.4 L/mol = 0.180 mol [tex]CO__2[/tex]

Similarly, the mass of H2O produced corresponds to:
3.602 g / 18.02 g/mol = 0.200 mol [tex]H_2O[/tex]

Since the hydrocarbon undergoes complete combustion, it reacts with oxygen to form [tex]CO__2[/tex] and [tex]H_2O[/tex] according to the balanced chemical equation:

[tex]CxHy[/tex] + (x + (y/4))O2 → [tex]CO__2[/tex] + (y/2)[tex]H_2O[/tex]
where x and y are the coefficients of the balanced equation. We can use the stoichiometric ratios to set up two equations:

0.180 mol [tex]CO__2[/tex] = x mol [tex]CxHy[/tex] → x = 0.180 mol / 0.0200 mol = 9
0.200 mol [tex]H_2O[/tex] = (y/2) mol [tex]CxHy[/tex] → y = 0.400 mol / 0.0200 mol = 20

Therefore, the molecular formula of the hydrocarbon is [tex]C_9H_20[/tex].
(b) To find the empirical formula of the hydrocarbon, we need to divide the subscripts by their greatest common factor. In this case, both subscripts are divisible by 4, so we get:

[tex]C_9H_20[/tex] → C9/4H5
Therefore, the empirical formula of the hydrocarbon is C9/4H5.

For more question on molecular

https://brainly.com/question/24191825

#SPJ11

The feather is the least thick of the bunch. This is due to the fact that density is defined as mass per unit volume.

A feather has a relatively low mass compared to its volume, due to its porous and lightweight nature. Marble, coin, and phone all have substantially higher densities than a feather since they are constructed of denser materials such as stone, metal, and plastic/electronics.

As a result, when the density of these things is compared, the feather is the least dense.

Because it has a significantly smaller mass than the other objects listed, the feather would be the least dense. Because density is defined as mass per unit volume, an object with a lower mass and the same or greater volume has a lower density.

The stone, coin, and phone all have greater masses and thus higher densities than the feather. However, because density varies based on the exact material used, the relative densities of these things may change if they are made of different materials.

learn more about Dense here

https://brainly.com/question/1354972

#SPJ1

The volume of ammonia needed to react completely with 30 Liters of NO at STP is 45 L.

The volume of ammonia needed to react completely with 30 Liters of NO at STP is calculated as follows;

4NH₃  + 6NO    →   5N₂   +  6H₂O

From the reaction given above, we can see that;

4 moles of ammonia ------------> 6 moles of NO

ratio = 4 : 6

The volume of ammonia required is calculated as;

4 -------------- > 6

30 L -----------> ?

? = (30 L x 6 ) / 4

? = 45 L

Learn more about reaction here: https://brainly.com/question/29470602

#SPJ1

The sample of the unknown metal has the mass of the 135 grams. The sample cools from the 100.5 °C to the 35.5 °C, and it releases the 7500 joules of the energy. The specific heat of the sample is 0.854 J/g °C.

Th mass of the metal = 135 g

The initial temperature = 100.5 °C

The final temperature = 35.5 °C

The heat energy releases = - 7500 J

The heat energy is expressed as :

Q = mc ΔT

Where,

The m is mass of the metal = 135 g

The c is the specific heat capacity = ?

The Q is heat energy releases = - 7500 J

The ΔT is the change in the temperature = final temperature - initial temperature.

The ΔT is the change in the temperature = 35.5 - 100.5

The ΔT is the change in the temperature =  - 65 °C

The specific heat capacity, c = Q / m ΔT

The specific heat capacity, c = - 7500 / 135 × - 65

The specific heat capacity, c = 0.854 J/g °C

The specific heat capacity of metal is 0.854 J/g °C.

To learn more about specific heat here

https://brainly.com/question/19907993

#SPJ1

To answer these questions, we need to know what substance you are referring to, as well as the data from the experiment.

1. After a certain number of time intervals (shakes), one-half of your atoms (candies) would decay. This number would depend on the specific substance and its half-life.
2. The half-life of a substance is the time it takes for half of its atoms to decay.
3. If the half-life model decayed perfectly, the number of remaining atoms after 12 seconds would depend on the initial number of atoms and the half-life of the substance.
4. If you increased the initial number of atoms (candies) to 300, the overall shape of the graph would not be altered. This is because the half-life decay is a percentage-based process, meaning it would still follow an exponential decay pattern.
5. To calculate the percentage of decay for each three-second interval, you would divide the number of candies decayed by the number previously remaining and multiply by 100. This would show the percentage of decay for each interval.
6. This activity may not perfectly model the concept of half-life, but it can provide a close approximation. Any discrepancies may be due to experimental errors or limitations.
7. To compare how well this activity modeled the half-life of a radioactive element, you would need to analyze the decay percentages over time. If there are differences in the effectiveness of the half-life model, it could be due to the limitations of the experimental setup, such as using candies as a representation of atoms.

For more question on substance

https://brainly.com/question/24647756

#SPJ11

b. To determine the number of joules of energy for the slice of cake, we need to convert the calories to joules using the conversion factor 1 calorie = 4.184 joules:

Number of joules = 560 calories * 4.184 joules/calorie = 2343.04 joules

Therefore, the slice of cake contains 2343.04 joules of energy.

c. To determine the number of kilojoules of energy for the slice of cake, we can divide the number of joules by 1000:

Number of kilojoules = 2343.04 joules / 1000 = 2.34304 kilojoules

Therefore, the slice of cake contains 2.34304 kilojoules of energy.

To determine the number of calories in 1.5 kilojoules of energy, we need to convert kilojoules to calories using the conversion factor 1 kilojoule = 1000 calories:

Number of calories = 1.5 kilojoules * 1000 calories/kilojoule = 1500 calories

Therefore, 1.5 kilojoules of energy contains 1500 calories.

Explanation:

Answer:

2. a. 560 Calories, b. 2343.04 J, c. 2.34304 kJ

3. 358.508604 Cal

Explanation:

2.

a. The number of calories found in the slice of chocolate cake is 56012.

b. To determine the number of joules of energy for the slice of cake, we can use the conversion factor that 1 calorie is equal to 4.184 joules3. Therefore, the number of joules in the slice of cake is:

560 Cal ⋅ 4.184 J/ 1 Cal = 2343.04J

c. To determine the number of kilojoules of energy for the slice of cake, we can use the conversion factor that 1 kilojoule is equal to 1000 joules4. Therefore, the number of kilojoules in the slice of cake is:

2343.04 J ⋅ 1 kJ/1000 J = 2.34304 kJ

3. To determine the number of calories in 1.5 kilojoules of energy, we can use the conversion factor that 1 kilojoule is equal to 239.005736 calories1. Therefore, the number of calories in 1.5 kilojoules of energy is:

1.5 kJ ⋅ 239.005736 Cal / 1 kJ = 358.508604 Cal

The mass of hydrogen gas produced, given that 525 mL of the gas was collected over water is 0.04 grams

First, we shall determine the mole of the dry hydrogen gas collected. Details below:

PV = nRT

0.9357 × 0.525 = n × 0.0821 × 298

Divide both sides by (0.0821 × 298)

n = (0.9357 × 0.525) / (0.0821 × 298)

n = 0.02 mole

Finally, we shall determine the mass of the hydrogen gas produced. Details below:

Mole = mass / molar mass

0.02 = Mass of H₂ / 2

Cross multiply

Mass of H₂ = 0.02 × 2

Mass of hydrogen gas, H₂ = 0.04 grams

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

The surface area of the rectangular prism is 0.034 square meters.

For a rectangular prism with length l, width w, and height h, the surface area is:

Surface area = 2lw + 2lh + 2wh

Substituting the given values, we get:

Surface area = 2(10 cm x 5 cm) + 2(10 cm x 8 cm) + 2(5 cm x 8 cm)

Surface area = 100 cm² + 160 cm² + 80 cm² = 340 cm²

We can use dimensional analysis. So the conversion factor is:

1 m² / 10,000 cm²

Multiplying the surface area by this conversion factor, we get:

Surface area = 340 cm² x (1 m² / 10,000 cm²)

Surface area = 0.034 m²

To know more about rectangular prism, here

brainly.com/question/21308574

#SPJ1

--The complete Question is, What is the surface area of a rectangular prism that has a length of 10 cm, a width of 5 cm, and a height of 8 cm? Use dimensional analysis to convert the answer to square meters--

The mass of hydrogen produced in the reaction is 2g.

The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.

A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.

Given,

Mass of Zn = 65g

Mass of HCl = 72g

Moles of Zn = mass / molar mass

= 65 / 65 = 1 mole

Moles of HCl = 72 / 36.5

= 1.97 moles

Since moles of Zn is lesser, therefore it is the limiting reagent.

From the reaction, 1 mole of Zn gives 1 mole of hydrogen

Moles of hydrogen = 1 mole

mass of hydrogen = moles × molar mass

= 1 × 2 = 2g

Therefore, the mass of hydrogen produced in the reaction is 2g.

Learn more about Moles, here:

https://brainly.com/question/31597231

#SPJ2

Answer: H2O + CO2 --> H2CO3

Explanation:

Water and Carbon Dioxide react to form Carbonic Acid

H2O + CO2 --> H2CO3

Statement that shows that the total energy of a system remains constant and is conserved would confirm the law of conservation of energy.

What is law of conservation?

The law of conservation of energy states that energy cannot be created or destroyed, only transformed from one form to another. Therefore, any statement that shows that the total energy of a system remains constant and is conserved would confirm the law of conservation of energy.

Here are some examples of statements that confirm the law of conservation of energy:

All of these statements confirm the law of conservation of energy by showing that the total energy of a system is conserved over time.

To know more about energy, visit:

https://brainly.com/question/1859083

#SPJ9

Complete question is: "The total energy of a system remains constant and is conserved" statement would confirm the law of conservation of energy.

The pressure of hydrogen gas formed is 709.5 mmHg.

Partial pressure is the pressure exerted by a single gas component in a mixture of gases, assuming all other gases are held constant.

In this case, the hydrogen gas is formed by a chemical reaction.

To calculate the partial pressure of hydrogen gas, we need to subtract the vapor pressure of water from the total pressure of the gas collected.

The vapor pressure of water at 18.0 °C is 15.5 mmHg.

Therefore, the partial pressure of hydrogen gas can be calculated as:

Partial pressure of hydrogen gas = Total pressure - Vapor pressure of water

Partial pressure of hydrogen gas = 725.0 mmHg - 15.5 mmHg = 709.5 mmHg

To know more about hydrogen gas here

brainly.com/question/12494649

#SPJ1

The method for determining the sum of Vitamin C in fruit juice ordinarily includes adding an indicator (such as DCPIP) to the juice test and titrating the test with a standard arrangement of ascorbic corrosive until the marker changes colour.

In any case, there are a few variables that seem to make this strategy troublesome to utilize for other natural product juices such as cranberry, blackcurrant, or pomegranate juice:

In this manner, whereas the strategy for deciding the sum of Vitamin C in natural product juice can be a valuable apparatus, it may not be appropriate for all sorts of natural product juices and may have to be be adjusted or adjusted to account for these variables. 

To learn more about VITAMIN C,

https://brainly.com/question/1165711

#SPJ1

The reaction A + B → C has the following rate expression is 197.62 [A][B] M/s

Using the experimental data to determine the order of the reaction with respect to A and B, assume that the rate of the reaction is given by:

rate = [tex]k[A]^x[B]^y[/tex]

where k =  rate constant and

x and y = orders of the reaction with respect to A and B, respectively.

Compare the rates of the reaction in trials 1 and 2 while keeping the concentration of A constant:

rate1/rate2 = [tex]\frac{k[A]^x[B]^y}{k[A]^x[B]^y} = \frac{[B]^y}{[B]^y} = 1[/tex]

Conclude that the reaction is first-order with respect to B.

Similarly, compare the rates of the reaction in trials 1 and 3 while keeping the concentration of B constant:

rate1/rate3 =[tex]\frac{k[A]^x[B]^y}{k[A]^x[B]^y} = \frac{[A]^x}{[A]^x} = 1[/tex]

Therefore, the reaction is first-order with respect to A.

The rate expression for the reaction A + B → C is:

rate = k[A][B]

Using any of the experimental trials to determine the value of the rate constant k, use trial 1:

rate1 =[tex]k[A]^1[B]^1[/tex]

k = [tex]\frac{rate1}{[A]^1[B]^1}[/tex] = (3.30 E-3)/(0.012 M x 0.014 M) = 197.62 M⁻² s⁻¹

Therefore, the rate expression for the reaction A + B → C is:

rate = 197.62 [A][B] M/s

In this case, the units of k are M⁻¹ s⁻¹ because the reaction is first-order with respect to both A and B.

Find out more on rate expression here: https://brainly.com/question/15154019

#SPJ1

The total volume of the solution is 300 mL.

To calculate the total volume of the solution, we simply add the volumes of the ethanol and water together:

The total volume of solution = volume of ethanol + volume of water

= 100 mL + 200 mL

= 300 mL

Therefore, the total volume of the solution is 300 mL.

When two or more compounds are combined to form a solution, the substance present in the smallest amount is known as the solute, and the material present in the largest amount and which dissolves is known as the solvent.

The solute, which can be a solid, liquid, or gas, dissolves in the solvent, which is often a liquid.

In this scenario, 100 mL of ethanol and 200 mL of water are combined to make the solution. The solute in this solution is ethanol, a colorless liquid. Water is a polar solvent that can dissolve a wide range of compounds, including ethanol. When ethanol and water are combined, they dissolve and form a homogeneous mixture.

learn more about ethanol here

https://brainly.com/question/20814130

#SPJ1

A 10 g piece of metal at 50°C absorbs 900 G of energy after which the temperature of the metal is 350°C. 0.35J/g°C is the specific heat of the metal.

The amount of heat needed to raise a substance's temperature by one degree Celsius in one gramme, also known as specific heat. Typically, calories and joules per gramme per degree Celsius are used as the measurement units of specific heat.

For instance, water has a specific heat of 1 calorie per gramme per degree Celsius. The notion of specific heat was developed by the Scottish scientist Joseph Black in the 18th century as a result of his discovery that equal masses of different substances required varying quantities.

q = m×c×ΔT

900= 10×c×( 350-50)

c=0.35J/g°C

To know more about specific heat, here:

https://brainly.com/question/11297584

#SPJ1

Answer:

OB. formation of new elements.

Nuclear reactions involve changes in the nucleus of an atom, such as the splitting of a nucleus or the combining of two nuclei. These reactions can result in the formation of new elements, as the number of protons in the nucleus determines the element. In contrast, chemical reactions involve the rearrangement of electrons between atoms to form new compounds, but do not involve changes to the nucleus.

Answer: D

Explanation:

When 12.50 mL of 1.05 M KOH is added to 50.0 mL of 0.225 M HBr, the resulting solution has a pH of 13.35.

Here’s how to calculate it:

First, we need to determine the number of moles of KOH and HBr in the solution:

moles of KOH = (12.50 mL) * (1.05 mol/L) * (1 L/1000 mL) = 0.013125 mol moles of HBr = (50.0 mL) * (0.225 mol/L) * (1 L/1000 mL) = 0.01125 mol

KOH is a strong base and HBr is a strong acid, so they will react completely to form water and a salt (KBr):

KOH + HBr -> KBr + H2O

The number of moles of KOH is greater than the number of moles of HBr, so there will be an excess of KOH in the solution after the reaction is complete:

moles of excess KOH = moles of KOH - moles of HBr = 0.013125 mol - 0.01125 mol = 0.001875 mol

The total volume of the solution is the sum of the volumes of KOH and HBr:

total volume = 12.50 mL + 50.0 mL = 62.5 mL

The concentration of excess OH- ions in the solution is:

[OH-] = moles of excess KOH / total volume = 0.001875 mol / (62.5 mL * (1 L/1000 mL)) = 0.03 M

The pOH of the solution can be calculated using the formula pOH = -log[OH-]:

pOH = -log(0.03) = 1.52

The pH can be calculated using the formula pH + pOH = 14:

pH = 14 - pOH = 14 - 1.52 = 13.35

So the correct answer is D. 13.35.