Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. Therefore, 0.630 is the gram molecular mass of this gas.
What is density?Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water.
Mathematically,
Density = Mass of the gas ÷volume marked on the graduated cylinder
density= 0.630 grams per liter
means 0.630 grams of an unknown gas is present in 1 liter of solution
Therefore, 0.630 is the gram molecular mass of this gas.
To know more about density, here:
https://brainly.com/question/16894337
#SPJ1
Write a scientific explanation describing whether energy is required for photosynthesis to occur. IN CER PLZ
Answer:
Plants are called autotrophs because they can use energy from light to synthesize, or make, their own food source. Many people believe they are “feeding” a plant when they put it in soil, water it, or place it outside in the Sun, but none of these things are considered food. Rather, plants use sunlight, water, and the gases in the air to make glucose, which is a form of sugar that plants need to survive. This process is called photosynthesis and is performed by all plants, algae, and even some microorganisms. To perform photosynthesis, plants need three things: carbon dioxide, water, and sunlight.
Answer:
energy is of course required for photosynthesis to occur as photosynthesis is self is the process of plants of green plants to make food or to provide food for themselves in the presence of sunlight carbon dioxide and using water from the soil in the definition you can also say that sunlight is needed for photosynthesis to take place and some light is a form of energy which is solar energy so energy is required for photosynthesis to occur
Suggest a procedure for separating iron shavings from sawdust. Explain why this procedure would work.
Dont send a file i will report you if you do
Answer:
Magnetic separation
Sawdust is a non-magnetic material whereas iron shavings are magnetic. When a magnet is brought near a mixture of iron shavings and sawdust, the iron shavings will be attracted to the magnet while the sawdust will not. Thus, the iron shavings will be separated from the sawdust.
Explanation:
Separation techniques makes use of the differences in the properties of components of mixtures to separate theses components, one from another.
In a moxturemof iron shavings and sawdust, a suitable separation technique would be the use of magnetic separation.
The use of this separation technique is abasednonnthe principle that when a magnetnis brought near to a mixture containing magnetic and non-magnetic materials, the magnetic materials will be separated from the non-magnetic materials due to their attraction to the magnet. Sawdust is a non-magnetic material whereas iron shavings are magnetic. When a magnet is brought near a mixture of iron shavings and sawdust, the iron shavings will be attracted to the magnet while the sawdust will not. Thus, the iron shavings will be separated from the sawdust.
Calculate the molality of each of the following aqueous solutions (a) 2. 50 m nacl solution (density of solution = 1. 08 g/mL) (b) 48. 2 percent by mass KBr solution
The molarity of 2. 50 m NaCl solution is 2.68 molal and 48. 2 percent by mass KBr solution is 7.82 m.
Molality = moles solute / kg solvent
Assume we have 1000 ml of solution.
1000 ml ₓ 1.08 g/ml = 1080 g
Now find the mass of NaCl:
2.50 M NaCl = 2.50 mol/L and 2.50 mol/L x 1 L = 2.50 moles of NaCl
molar mass NaCl = 58.4 g/mol, therefore mass NaCl present = 2.50 mol ₓ 58.5 g/mol = 146 g NaCl
Now find the mass of H₂O:
grams H₂O present = 1080 g - 146 g = 934 g H2O = 0.0.934 kg
We now have moles NaCl and kg H₂O
Molality = 2.50 mol / 0.934kg = 2.68 molal
48.2% by mass of KBr means 48.2 g KBr / 100 g solution
To find molality, we need moles of KBr and kg of H₂O. We can easily find he moles of KBr from the mass and the molar mass.
If we have 100 g solution, 48.2 g is KBr so the rest is H₂O.
100 g - 48.2 g = 51.8 g H₂O and this is equal to 0.0518 kg H₂O
Moles KBr = 48.2 g KBr ₓ 1 mol KBr/119 g = 0.405 moles KBr
Molality = 0.405 moles KBr / 0.0518 kg H₂O = 7.82 m
To know more about molality here
https://brainly.com/question/26921570
#SPJ4
List some of the methods used to prevent or slow corrosion with detailed explanation
Answer:
There are several methods that can be used to prevent or slow corrosion:
Coatings: Applying a protective coating to a metal surface can prevent corrosion by creating a barrier between the metal and the environment. Common types of coatings include paint, galvanizing, and electroplating.
Cathodic protection: Cathodic protection involves applying a current to a metal surface in order to reduce the potential difference between the metal and its environment. This can help to prevent corrosion by reducing the electron flow that drives the corrosion reaction.
Inhibitors: Corrosion inhibitors are chemical substances that can be applied to a metal surface to slow or prevent corrosion. These substances work by reacting with the metal surface or the environment to form a protective film or layer.
Passivation: Passivation is a process that involves removing surface contaminants and oxide layers from a metal surface in order to improve its corrosion resistance. This can be achieved through chemical or mechanical means.
Materials selection: Choosing corrosion-resistant materials for specific applications can help to prevent or slow corrosion. For example, stainless steel is a commonly used material for corrosive environments because of its high resistance to corrosion.
Environmental control: Controlling the environment in which a metal object is used can also help to prevent or slow corrosion. For example, reducing humidity or keeping a metal object dry can help to prevent corrosion.
Maintenance: Regular maintenance, such as cleaning and inspection, can help to identify and address corrosion issues before they become severe. This can include removing corrosion products, repairing damage, and applying protective coatings as needed.
HOW TO DO THIS QUESTION PLEASE
Answer:
solid
Explanation:
lithium is a solid so it would still be solid since it is at 100 degrees and has not yet gotten to 180 degrees which is when it melts
Which element doe not form a table ion with the ame electronic configuration a neon?
A Magneium B Fluorine C Sodium D Chlorine
Sodium does not form a stable ion with the same electronic configuration as neon.
Electronic configuration of an element describes that how the electrons are distributed in its atomic orbitals. Electronic configuration of an atoms follows a standard notation in which all electron-containing atomic subshells (with the number of electrons they hold written in superscript) are placed in a sequence.
Sodium (Na) ion has the same electronic configuration as that of neon. Both are the isoelectronic species with 10 electrons and the electronic configuration is 1s22s22p6.
Sodium has electronic configuration is 1s22s22p63s1. It loses one electron to give Na+ ion with the electronic configuration of neon (Ne).
To know more about element here
https://brainly.com/question/13794764
#SPJ4
Provided below are pictures of three different scnearios in which two different chemicals are mixed together. for each scenario, make a claim about whether or not a chemical reaction is occuring. Provide evidence and reasoning to support your claim. If a reaction cannot be determined based on the provided picture, explain why not and how you could determine if a reaction has occured. Use specific examples in your explanation.
Looking at the images that we have, we can see that there is a reaction in the images A and C.
What is a reaction?We would need to settle in our minds what is implied when we talk about a chemical reaction. You have to know that if we are talking about a chemical reaction then we are talking about the kiondfs of reaction that would lead to the following observations;
1) There is a change in the temperature of the system
2) There is an effervescence of gas in the system
3) There is a change in color
4) There is the appearance of a solid in the system
We would now have to look at all the setups that we have here and we have to look at it in such a way that we could know if there is a reaction that is going on in any of them as shown.
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
What is the molecular formula of the molecule in figure 3
Answer: The molecular formula of the molecule is [tex]CH_3OH[/tex]
Explanation:
Molecular formula is the chemical formula which depicts the actual number of atoms of each element present in the compound.
The given compound contains one carbon atom, four hydrogen atoms and one oxygen atom.
It is an alcohol with functional group -OH and with molecular formula of [tex]CH_3OH[/tex] named as methanol.
The molecular formula of the molecule is [tex]CH_3OH[/tex]
The molecular formula of the molecule in figure 3 is [tex]CH_3OH[/tex].
The following information should be considered:
The molecular formula represents the chemical formula in which the actual no of atoms for each & every element should be presented in the compound. In the given compound, it comprise of 4 hydrogen atoms, 1 oxygen atom, 1 carbon atom. It is the alcohol having functional group i.e. -OH along with the molecular formula i.e. [tex]CH_3OH[/tex] that we called as the methanol.
Therefore we can conclude that the molecular formula of the molecule in figure 3 is [tex]CH_3OH[/tex].
Learn more: brainly.com/question/17127206
Determine whether each of the following compounds is a molecular compound or an ionic compound. How can you tell?
a. ) PBr₃
b. ) KBr
c. ) Iron (III) Oxide
d. ) Carbon Tetraiodide
PBr₃ and Carbon Tetraiodide is a covalent compound. Whereas, KBr and Iron (III) Oxide is an ionic compound.
Covalent compounds and molecular compounds are those compound where two non-metals, or a non-metal are bonded to each other through the sharing pair of electrons.
PBr₃ are covalent because phosphorous is in the column 3 in periodic system and it has three valence electrons in its outer shell. Therefore, in case of Carbon Tetraiodide carbon and iodide both are non-metals that why they are covalent compounds.
KBr and Iron (III) Oxide both are Iron (III) Oxide because they are formed by the interaction between a metal and non-metal. They will transfer the electrons from positively to negatively charged atoms.
To know more about covalent compound here
https://brainly.com/question/11632372
#SPJ4
A mixture of gases contains oxygen, nitrogen, and hydrogen at 0 degrees Celsius. The partial pressure of the oxygen gas is 20 kPa, the partial pressure of nitrogen gas is 40 kPa, and the partial pressure of hydrogen gas is 14 kPa. What is the total pressure exerted
The total pressure exerted by the gas mixture is 74 kPa.
What is hydrogen?Hydrogen is an odorless, colorless, and tasteless gas that is the most abundant element in the universe. It is the lightest of all elements and is a component of many compounds, such as water and hydrocarbons. Hydrogen has the highest energy content of any common fuel, making it an attractive energy source. Additionally, it is utilised in the manufacture of fertiliser, polymers, and pharmaceuticals as well as a propellant.
This is calculated by adding up the partial pressures of each individual gas in the mixture, which in this case is 20 kPa for oxygen, 40 kPa for nitrogen, and 14 kPa for hydrogen. 20 + 40 + 14 = 74
To learn more about Hydrogen
https://brainly.com/question/24433860
#SPJ4
A world without friction would it be?
Bill Nye Video
Answer:
it opposes motion. the object would continue to slide forever if not stopped by another object.
Can you help me please
Answer:
the last one
explanation is the white colour
Classify the reaction in each of the following equations.
a. FeCl2 (aq) + Mg → MgCl2 (s) + Fe(s)
b. NH3 (g) → N2 (g) + H2 (g)
Answer
a. Single displacement
b. Decomposition
When classifying chemical reactions, consider how reactants change to form the products.
An equation for a chemical reaction has a left side and a right side. The arrow separates the left and right sides.
The left side is called the reactants. The right side is called the products.Each product or reactant can be one or more elements.
Some Types of ReactionsWe can use letters* to represent products and reactants in a reaction.
SynthesisTwo reactants become one product.
A + B → ABDecompositionOne reactant becomes two products.
AB → A + BIn equation (b), this is like how NH₃ separated into two products, N₂ and H₂.Single DisplacementStart with two reactants, a compound and an element. To form the products, the element replaces one of the elements that was in the compound.
AB + C → AC + BIn equation (a), this is like how Mg replaced Fe. Fe was part of a compound at first. Now, Mg is part of a compound instead.Double DisplacementStart with two reactants that are compounds. To form the products, an element from each compound replaces each other.
AB + CD → AC + BDTherefore, equation (a) is a single displacement reaction and equation (b) is a decomposition reaction.
*Each letter represents an element. Two elements make a compound. A letter can also represent a compound if compound stays together during the reaction.
Learn more about displacement reactions here:
https://brainly.com/question/13219117
^^^ above. Please don’t send a link do somewhere random. Thank you, preferably just answer here.
at the left.
2. Which of the following is not a
chemical change? E
A leaves turning color
B fruit ripening
C silver tarnishing
D food coloring dissolving in water
Answer:
D
Explanation:
there is no new substance formed
Which forces can be represented in a free body diagram
The statement "atoms have a small, dense nucleus" is true. What evidence do scientists use to prove this statement as true?
Most alpha particles shot at gold foil go straight through, without any changes in their direction.
The particles ejected in Thomson's experiment bent away from the negatively charged plates, but toward positively charged plates.
A few alpha particles shot at gold foil bounce in the opposite direction
No matter which element Thomson put in a cathode ray tube, the same negative particles with the same properties (such as charge and mass) were ejected.
To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, the correct option is option C.
What is atom?Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.
In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.
The statement "atoms have a small, dense nucleus" is true. A few alpha particles shot at gold foil bounce in the opposite direction is the evidence.
Therefore, the correct option is option C.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ1
A semen sample is received in the laboratory for evaluation of fertility. No sperm are observed upon initial microscopic examination of the sample. How should you proceed
Laboratories are used in many different fields, including medicine, chemistry, biology, physics, engineering, and more.
What is laboratory?A laboratory is a facility where scientists conduct research and experiments. It is equipped with specialized equipment, tools, and supplies required for the specific purpose of conducting scientific tests, experiments, and analysis.
The next step would be to look for other seminal components, such as white blood cells, red blood cells, epithelial cells, and other organic and inorganic components. If no sperm are present, then a detailed analysis of the sample is necessary to determine the cause of the absence of sperm. Possible causes of azoospermia, or the absence of sperm, include hormonal imbalance, anatomical defects, genetic conditions, and medical treatments.
To learn more about laboratory
https://brainly.com/question/10714321
#SPJ4
HELPPPP!!! SHOW WORK
On the day this exercise was written, atmospheric pressure was 745.8 mm Hg. Calculate the pressure in units of atmospheres, cm Hg, lbs./in2, and torr
Answer:
1) 0.98 atm
2) 74.58 cmHg
3) 14.47 lbs./in²
4) 745.8 torrs
Explanation:
We are given the atmospheric pressure as 745.8 mmHg
1) Converting mmHg to atmospheres(atm), we divide the pressure by 760.
P = 745.8/760
P = 0.98 atm
2) Converting mmHg to cmHg, we multiply the pressure by 0.1;
P = 745.8 × 0.1
P = 74.58 cmHg
3) Converting mmHg to lbs./in², we divide the pressure by 51.75;
P = 748.5/51.715
P = 14.47 lbs./in²
4) Converting mmHg to torrs, we multiply the pressure by 1;
P = 745.8 × 1
P = 745.8 torrs
A gas has a pressure of 120 kPa, a temperature of 400 K and a volume of 50.0 mL. What volume will the gas have at a pressure of 60 kPa and a temperature of 200 K
The gas will have a volume of 25.0 mL at a pressures of 60 kPa or a temperature of 200 K.
What is temperature?The average kinetic potential of the particle in a system is measured by temperature. Temperature is measured using thermometers, which measure the temperature of a system by taking a reading of the system's average kinetic energy. Temperature is measured in degrees, with higher temperatures indicating a higher average kinetic energy. Temperature can be affected by a variety of factors, including the amount of energy added to or removed from a system, the number of particles present in the system, and the type of particles present in the system.
To learn more about temperature
https://brainly.com/question/2339046
#SPJ4
Cuál es la densidad (g/ml) de un líquido de batería de automóvil, si tiene un volumen de 0,125 L y una masa de 155g??
Answer:
xbvmyyyxxxsaqqqeerzdyxctzzvjmih
Which statement most accurately describes a chemical equation?
a. in a chemical reaction, the mass of the energy change must be equal to the energy used
b. in a chemical reaction, the mass of the products must equal the mass of the reactants
c. in a chemical reaction, the mass of each product must be the same
d. in a chemical reaction, the combined mass of the container the substances is always equal
Answer: C
Explanation:
Which would best describe the properties of lodine?
a. Not reactive with any other element
b. Not malleable, not ductile, lower density
c. Malleable, ductile, conductive
d. Exists as a gas
I'm pretty sure it's B :)
Why do halogens get less reactive?
The halogens gets less reactive as we move down the group because the atomic mass will increases and the number of the electrons are increases.
The halogens get less reactive as we move top to bottom in the group in the periodic table as the atomic mass of the group 17 elements that is halogens will increases and as we move from from top to bottom in the periodic table the electrons are added and the number of electrons are increases.
This is reason , that the reactivity of the group 17 elements that is halogens will decreases as we move from top to bottom.
To learn more about halogens here
https://brainly.com/question/15370711
#SPJ4
What is the definition of a commission? * 4 points Earnings based on how much they sell What you are paid to work. When you are paid to work on a mission as a coworker.
Answer:
Earnings based on how much they sell
Explanation:
A sales presentation can be defined as series of talk given by a salesperson with the attempt to persuade someone or a potential customer to buy a particular product, by giving information it. Some salespersons resort to the use of dramatics so as to initiate and close the sale of a particular product by engaging in series of theatrical actions.
In sales and marketing, the term closing with respect to a sales can be defined as the process of making a business sale successful such as through the exchange of money for a particular product or goods.
For a salesperson to be able to close a sales, he or she require abilities such as courage, negotiation skills, listening ears and interpersonal skills to do so or achieve a successful sales. After a successful sales, they're entitled to a percentage of the amount made from selling a particular product or closing a deal based on what is stated in the contract. These amount of money earned with respect to each sales is generally referred to as commissions.
Commission can be defined as an amount of money earned based on how much a salesperson sell.
A screw has _____ over the cylinder.
corkscrew-shaped ridge
What is a screw’s output?The screw’s applied force (output force) is always larger than the screw’s applied force (input force). As a result, a screw’s mechanical advantage is always larger than one.Screws are a type of basic machine. They have a thread, which is a corkscrew-shaped ridge wrapped around a cylinder. When driving in a screw, the head is particularly designed to allow a screwdriver or wrench to hold the screw.
Another sort of inclined plane is the screw. When an inclined plane wraps around a straight rod-like structure, a spirally grooved surface with a pointed end is generated. It serves to keep things together.
To learn more about screw to refer:
https://brainly.com/question/19552791
#SPJ1
How do you find a proton number?
To find a proton number, we can use the Periodic Table of the Elements.
What is the Periodic Table of the Elements?The Periodic Table of the Elements is a table that organizes all discovered chemical elements in rows and columns according to the increasing atomic number.
To find the numbers of protons using this periodic table, first, we have to find the element on the periodic table. Using the columns (group) or rows (period) can make the element easier to find on the table.
Second, find the element’s atomic number, which is located above the element symbol, in the upper left-hand corner of the square. This atomic number will tell us how many protons make up a single atom of that element. For example, Boron (B) has an atomic number of 5, consequently it has 5 protons.
Learn more about protons at: https://brainly.com/question/12535409
#SPJ4
Which of the following is an incorrect statement?
Sound is not a form of energy.
Light is a form of energy.
Sound is a form of energy.
Heat is a form of energy.
Answer: Heat is not a form of energy
sound is a form of energy
Explanation:
A new candy has a very sour taste. If this candy were dissolved in water, the solution would likely be _______.
Answer:
It is a sour candy. And when you put it in water it will dissolves.
Explanation:
Which statement best describes the sun earth moon system during a spring tide
The moon the sun and earth form a right angle
The sun the moon and earth are in a straight line
The sun is between moon and earth
The moon is in the first quarter face
Answer:
yung una po
Explanation:
kasi meron yan sa grade 6
Answer:
The Answer Is B The Sun,The Moon,And Earth Are In A Straight Line
Explanation:
Hope This Helps!