An aluminum can is to be constructed to contain 2500 cm of liquid. Letr and h be the radius of the base and the height of the can respectively. a) Express h in terms of r. (If needed you can enter y aspi.) h = b) Express the surface area of the can in terms of r. Surface area = C) Approximate the value of r that will minimize the amount of required material (i.e. the value of that will minimize the surface area). What is the corresponding value of h? TE h=

A function is a rule that assingns each value of independent variable to exactly one value of the dependent variable.

A function is a mathematical concept that relates two sets of values, known as the domain and the range. The domain is the set of independent variables, while the range is the set of dependent variables. A function is a rule that assigns to each value in the domain exactly one value in the range.

For example, if we have a function f(x) = 2x + 3, the domain would be any possible value of x, and the range would be any possible value of 2x + 3. So if we put x = 2, then f(x) = 2(2) + 3 = 7. Therefore, the function assigns the value of 7 to the value of 2 in the domain.

Functions are used in various branches of mathematics, science, and engineering to model and analyze relationships between two or more variables. They are an important concept in calculus, where they are used to study rates of change and optimization problems.

Learn more about function at https://brainly.com/question/21084589

#SPJ11

Answer:

1/6

Step-by-step explanation:

Answer:

v = -64

Step-by-step explanation:

First, you add 4 to both sides to isolate the variable term:

v/8 = -8

Next, you multiply both sides by 8 to isolate the variable on one side:

v = -64

So, the solution to the equation v/8 - 4 = -12 is v = -64.

To test the convergence of the given infinite series, we can use the Alternating Series Test. The series is in the form: Σ((-1)^n * (arctan(n)/n^2)), for n = 1 to infinity.

The Alternating Series Test requires two conditions to be met:

1. The absolute value of the terms in the series must be decreasing: |a_n+1| ≤ |a_n|.
2. The limit of the terms in the series as n approaches infinity must be zero: lim (n→∞) |a_n| = 0.

For the given series, let's check these conditions: 1.The absolute value of the terms: |arctan(n)/n^2|. Since arctan(n) increases with n and n^2 increases faster than arctan(n), the ratio (arctan(n)/n^2) decreases as n increases. Therefore, this condition is met.

2. Now, we need to check the limit: lim (n→∞) |arctan(n)/n^2|. As n approaches infinity, the arctan(n) approaches π/2, and n^2 approaches infinity.

Therefore, the limit is (π/2)/∞ = 0, so the second condition is also met. Since both conditions are met, the Alternating Series Test confirms that the given series converges.

To know more about term click here

brainly.com/question/19774850

#SPJ11

                          "Complete question"

Apply Any Appropriate Testing Method To: ∞X N=1 (−1)Narctan N N2

Apply any appropriate Testing Method to:

∞X

n=1

(−1)narctan n

n2

This is the inequality that represents all possible widths, w, in feet of the garden is W^2 + 2W - 120 ≥ 0

The area of a rectangle is given by the formula A = L x W, where A is the area, L is the length, and W is the width. In this problem, we are given that the garden is rectangular and that the length is 2 feet longer than the width, so we can write L = W + 2.

We are also told that the area of the garden is at least 120 square feet, so we can write:
A = L x W ≥ 120
Substituting L = W + 2, we get:
(W + 2) x W ≥ 120

expanding the left side, we get:
W^2 + 2W ≥ 120
Rearranging, we get:
W^2 + 2W - 120 ≥ 0

You can read more about inequality at https://brainly.com/question/24372553

#SPJ11

The line of regression equation for the mileage rating of a ( point) four wheel drive vehicle is [tex]\hat y = 16.111 + 0.365x,[/tex] and the best predicted new mileage rating of a ( point) four-wheel drive vehicle when x = 19 mi/gal, is equals to the 23.046 mi/gal. So, option(b) is right one.

A linear regression line has an equation of the form [tex]\hat y = a + bx,[/tex]

where x is the independent variable and y is the dependent variable. The slope of the line is b, and a is the estimated intercept (the value of y when x = 0). We have a table form data of old and new rating of four-wheel-drive vehicles. We have to determine the line of regression. Now, we have to calculate the value of 'a' and 'b'. Let the old and new mileage rating of four-wheel-drive vehicles be represented by vaiables 'x' and 'y'. Using the following formulas, [tex]b =\frac{ S_{xy}}{S_{xx}}[/tex] where, [tex]S_{xx} = \sum x² - \frac{ (\sum x)² }{n} [/tex]

where , [tex]\bar x = \frac{\sum x }{n}[/tex]

Here, n = 11, [tex]\sum x[/tex] = 235

[tex]\sum xy[/tex] = 263, [tex]\sum x²[/tex] = 5733, [tex]\sum xy[/tex] = 5879, so

[tex]S_{xx}[/tex] = 5733 - (235)²/11

= 5733 - 5020.454 = 712.546

[tex]S_{xy}[/tex] = 5879 - (235×263)/11

= 260.364

Now, b = 260.364/712.546 = 0.365

a = (263/11) - 0.365 ( 235/11)

= 23.909 - 7.798

= 16.111

So, regression line equation is

[tex]\hat y = 16.111 + 0.365x,[/tex]

The best predicted value of y, when x = 19 mi/gal, [tex]\hat y = 19× 0.365 + 16.111[/tex]

=23.046 mi/gal

Hence, the best predicted value is

For more information about line of regression, visit:

https://brainly.com/question/732489

#SPJ4

Complete question:

10. Determine the line of regression and use it to find the best predicted new mileage rating of a ( point) four-wheel-drive vehicle given that the old rating is 19 mi/gal

old 6 27 17 33 28 24 8 22 20 29 21

New 15 24 15 29 25 22 6 20 82 6 19

a) y cap = 0.863 + 0.808x; 16.2 mi/gal

b) y cap = 16.111 + 0.365x; 23.04 mi/gal

c) y cap =0.808+ 0.863x; 17.2 mi/gal

d) y cap = 0.808 0.863x; 18.1 mi/gal

The option of bank B investment will allow to reach goal of buying the car the fastest compare to bank A it will take approximately 8.4 years

Saved amount = $15,000

Value of the car = $26,795

Use the formula for compound interest to calculate the time it will take to reach $26,795 for each bank,

Bank A,

Initial investment ' P ' = $15,000

Annual interest rate ' r ' =5.45%

                                       =  0.0545

compounded continuously  'n'  = infinity

Target amount  'A' = $26,795

The formula for continuous compounding is,

A = P[tex]e^{rt}[/tex]

Substituting the values, we get,

⇒ 26,795 = 15,000 × [tex]e^{(0.0545t)}[/tex]

Solving for t, we get,

⇒ t = (log(26,795/15,000))/(0.0545)

     ≈ 9.4 years

It will take approximately 9.4 years to reach the target amount if we invest in Bank A.

Bank B,

Initial investment ' P ' = $15,000

Annual interest rate ' r ' =5.75%/12

                                       =  0.00479 (monthly interest rate)

n = 12 compounded monthly

Target amount 'A' = $26,795

The formula for monthly compounding is,

A = [tex]P\times( 1+ r/n)^{nt}[/tex]

Substituting the values, we get,

26,795 = [tex]15,000 \times(1+0.00479/12)^{12t}[/tex]

Solving for t, we get,

t = (1/12) × (log(26,795/15,000))/(log(1+0.00479/12))

  ≈ 8.4 years

It will take approximately 8.4 years to reach the target amount if we invest in Bank B.

Therefore, investment in Bank B will allow you to reach your goal of buying the car the fastest, taking approximately 8.4 years.

Learn more about investment here

brainly.com/question/15314510

#SPJ4

Answer:

Step-by-step explanation:

Since the two cylinders are similar, their corresponding dimensions (radius and height) are proportional. Let the radius of the smaller cylinder be r.

Then, we can write:

r / 6 = R / 30

where R is the radius of the larger cylinder.

Simplifying this equation, we get:

R = 5r

Now, we can use the formula for the volume of a cylinder to find the volume of the larger cylinder:

Volume of smaller cylinder = πr^2h = 90 cm^3

Volume of larger cylinder = πR^2H = π(5r)^2(30) = 750πr^2 cm^3

Substituting R = 5r, we get:

Volume of larger cylinder = 750πr^2 cm^3

Therefore, the volume of the larger cylinder is 750π times the volume of the smaller cylinder:

Volume of larger cylinder = 750π(90 cm^3) = 67,500π/ cm^3 (approx. 211,239.74 cm^3 rounded to five decimal places).

The area of the ring created by the two circles is approximately 1374.63 square feet.

Let's first find the radius of the circumscribed circle. We can draw a diagonal of the regular octagon, which will be twice the length of one of its sides, forming an isosceles triangle with two radii of the circle.

The angle at the center of the circle between two adjacent sides of the octagon will be 360 degrees divided by 8, or 45 degrees.

The angle at the top of the isosceles triangle will be half of that, or 22.5 degrees. Using trigonometry, we can find the radius of the circumscribed circle:

[tex]$\sin(22.5^\circ) = \frac{opposite}{hypotenuse}$$\sin(22.5^\circ) = \frac{10}{2r}$$r = \frac{10}{2\sin(22.5^\circ)} \approx 21.21$[/tex]

Next, we can find the radius of the inscribed circle. Drawing radii from the center of the octagon to the points where it touches the circle, we can form 8 congruent isosceles triangles, each with a base of length 10 and two equal legs.

The angle at the top of each triangle will be half of the central angle between two adjacent sides of the octagon, or 22.5 degrees. Using trigonometry again, we can find the length of each leg of the triangle:

[tex]$\tan(22.5^\circ) = \frac{opposite}{adjacent}$$\tan(22.5^\circ) = \frac{r'}{5}$$r' = 5\tan(22.5^\circ) \approx 2.93$[/tex]

Now we can calculate the area of the ring created by the two circles:

[tex]$A = \pi R^2 - \pi r'^2$$A = \pi (21.21)^2 - \pi (2.93)^2 \approx 1374.63$ square feetTherefore, the area of the ring created by the two circles is approximately 1374.63 square feet.\\\\\\\\[/tex]

To learn more about bounded area go to:

https://brainly.com/question/28339136?referrer=searchResults

#SPJ11

The nearest year, we can estimate that the number of new cases would reach 1282 in the year 2017.

To find the linear regression equation, we need to use the formula:

y = a + bx

where y is the number of new cases, x is the number of years since 1995, a is the y-intercept and b is the slope of the line.

Using the given data, we can find the values of a and b using the formulas:

b = (nΣxy - ΣxΣy) / (nΣ[tex]x^2[/tex] - (Σx)[tex]^2)[/tex]

a = (Σy - bΣx) / n

where n is the number of data points, Σxy is the sum of the products of x and y, Σx is the sum of x, Σy is the sum of y, and Σ[tex]x^2[/tex] is the sum of squares of x.

Using these formulas and the given data, we get:

n = 9

Σx = 36

Σy = 7386

Σx^2 = 162

Σxy = 3330

b = (93330 - 367386) / (9*162 - 36^2) ≈ -75.44

a = (7386 - (-75.44)*36) / 9 ≈ 2612.67

Therefore, the linear regression equation is:

y ≈ 2612.67 - 75.44x

To estimate the year in which the number of new cases would reach 1282, we can substitute y = 1282 into the equation and solve for x:

1282 ≈ 2612.67 - 75.44x

75.44x ≈ 2612.67 - 1282

x ≈ 22.36

This means that the number of new cases would reach 1282 approximately 22.36 years after 1995. Adding this to 1995 gives us an estimate of the calendar year:

1995 + 22.36 ≈ 2017.36

Rounding to the nearest year, we can estimate that the number of new cases would reach 1282 in the year 2017.

Learn more about table.

brainly.com/question/10670417

#SPJ11

APR is obtained by dividing the finance charge for the loan by the total amount borrowed, given by this formula APR = ((F / P) x 12) x 100

The formula for APR (annual percentage rate) is given as;

APR = ((F / P) x 12) x 100

Where;

The annual percentage rate (APR) of a loan if you know the number of monthly payments and the finance charge per $100, is calculated as follows;

Learn more about APR here: https://brainly.com/question/3861581

#SPJ4

The zeros of the quadratic equation are as follows

1. y = -x²+ 6x - 5:

zeros: (1, 0) and (5, 0)

2. y = x² + 2x + 1:

zeros: (-1, 0).

3. y = -x²+ 8x - 17:

zeros: (0, 0) and (0, 0)

4. y = x² - 4:

zeros: (1, 0) and (5, 0)

Zero in a quadratic equation are x values ​​that make the equation equal to zero. In other words, they are the x-intercepts or roots of a quadratic function.

Using graphical method, a zero is the point of intersection of the curve with the x -axis and this is shown in the graph attached.

Learn more about quadratic equation at

https://brainly.com/question/1214333

#SPJ4

The coordinates of the point prior to the dilation are (-2,-1) when the Scale factor is 1/3 and the new coordinates are (-6,3).

To find the coordinates of the point prior to the dilation, we need to use the formula for dilation:

(x’, y’) = (k x, ky)

where

(x’, y’) = the new coordinates

(x, y) = original coordinates

k = scale factor

Given data:

Scale factor =  1/3

New coordinates = (-6, 3)

By substuting the values in the equation we get:

(-6, 3) = (k x, ky)

Solving for x and y:

k x = -6

ky = 3

Dividing the ky equation by the k x  equation we get:

y/x = 3/-6

y/x = -1/2

From the above equation, we can assume that x = 2 and y = -1.

Therefore, the coordinates of the point prior to the dilation are (-2,-1).

To learn more about dilation:

https://brainly.com/question/30240987

#SPJ4

To start, let's call the width of the rectangle "w" and the height "h". We know that the area must be 500 square feet, so we can write an equation:

w*h = 500

We can solve this equation for h:

h = 500/w

Now we can express the total cost of the wire in terms of w. The cost of the wire for the width is $2.50 per foot, so the cost for that side is:

2.5w

The cost of the wire for the height is $4.25 per foot, so the cost for that side is:

4.25h = 4.25(500/w) = 2125/w

So the total cost of the wire is:

C(w) = 2.5w + 2125/w

This is our final answer expressed in function notation.
Let's denote the width of the rectangle as w and the height as h. We are given that the area of the rectangle must be 500 square feet, so we have:

w * h = 500

Now, we need to find the cost function based on the width. The cost of the wire for the width is $2.50 per foot and for the height is $4.25 per foot. Therefore, the total cost (C) can be expressed as:

C(w) = 2.50 * w + 4.25 * h

We need to express the height (h) in terms of the width (w) using the area equation:

h = 500 / w

Now, we can substitute this expression for h in the cost function:

C(w) = 2.50 * w + 4.25 * (500 / w)

This is the cost function for building the rectangle out of wire as a function of its width, given that the enclosed area must be 500 square feet.

Learn more about rectangle here: brainly.com/question/29123947

#SPJ11

Step-by-step explanation:

It looks as though ( from your post)  Sweden won 4 golds and 0 silver and 2 bronze medals

4:0:2     simplifies to   2 :0 : 1

Choice D is correct: This situation satisfies each of the conditions for a binomial variable, so X has a binomial distribution.

A random variable X is said to have a binomial distribution if it satisfies the following conditions:

The variable X represents the number of successes in a fixed number of independent trials.

Each trial has only two possible outcomes: success or failure.

The probability of success is constant for each trial.

The trials are independent.

In this case, Yoshi attempts the same three-point shot until he makes the shot, so the number of attempts is not fixed. However, each attempt can be classified as a success (if he makes the shot) or a failure (if he misses the shot), so the variable X represents the number of successes in a sequence of independent trials with only two possible outcomes. Also, the probability of success is constant for each attempt, and the attempts are independent, so all four conditions for a binomial distribution are satisfied. Therefore, X is a binomial variable.

Choice D is correct: This situation satisfies each of the conditions for a binomial variable, so X has a binomial distribution.

Learn more about binomial distribution,

https://brainly.com/question/15246027

#SPJ11

The required answer is the nearest hundred dollars: $902.09 is approximately $900.

To find the value of the car 20 years after it was purchased, we can use the formula for exponential decay:

Value = Initial value * (1 - Depreciation rate) ^ (time elapsed / time for depreciation)

1. Determine the depreciation rate: The car's value depreciates by one half every 3.5 years, so the depreciation rate is 50% or 0.5.
Depreciation is a term that refers to two aspects of the same concept: first, the actual decrease of fair value of an asset, such as the decrease in value of factory equipment each year as it is used and wears, and second, the allocation in accounting statements of the original cost of the assets to periods in which the assets are used (depreciation with the matching principle).

Depreciation is thus the decrease in the value of assets and the method used to reallocate, or "write down" the cost of a tangible asset (such as equipment) over its useful life span

2. Calculate the number of depreciation periods: Since the car's value halves every 3.5 years, we need to find out how many 3.5-year periods are in 20 years. To do this, divide 20 by 3.5: 20 / 3.5 ≈ 5.71 periods.

3. Use the exponential decay formula:
Value = 29,000 * (1 - 0.5) ^ (5.71)
Value ≈ 29,000 * (0.5) ^ (5.71)
Value ≈ 29,000 * 0.0311
Value ≈ 902.09

4. Round the value to the nearest hundred dollars: $902.09 is approximately $900.

So, the value of the car 20 years after it was purchased is approximately $900.

To know more about depreciation value. Click on the link.

https://brainly.com/question/28498512

#SPJ11

Thus, the volume of cone for the given slant height and radius is found as:  314 cu. cm.

The distance from a cone's apex to its outer rim is referred to as the segment's slant height. It is corresponding to the hypotenuse's length of a right triangle that creates the cone.

Given data:

slant height of cone  l =  13 cm

radius r =  5 cm

Let h be the height

So, using Pythagorean theorem, find height.

l² = h² + r²

h² = l² - r²

h²= 13² - 5²

h² = 169 - 25

h = 12 cm

volume of a cone = 1/3 *π*r²*h

volume of a cone = 1/3 *3.14*5²*12

volume of a cone = 3.14*25*4

volume of a cone = 314 cu. cm

Thus, the volume of cone for the given slant height and radius is found as:  314 cu. cm.

Know more about the slant height of cone

https://brainly.com/question/12230403

#SPJ1

Probability is frequently used in news reports to convey the possibility of an event occurring.

Generally, in my opinion, probability is used well in the media space.

Probability is frequently used in news reporting to demonstrate the likelihood of an event occurring. A news story, for example, might mention that there is a 50% chance of rain tomorrow. Similarly, sports writers may use probability to forecast the outcome of games and goals to be scored.

Overall, I feel probability is utilized fairly responsibly in the media and entertainment industries, with a focus on informing or entertaining audiences rather than misleading them. However, in some cases, such as political polling or advertising, the use of probability may be incorrect or exploited to influence audiences.

Learn more about probability here: https://brainly.com/question/13604758

#SPJ1

The area of the cross-section is 16 sq. cm. Thus, option C is the correct answer.

Vertices sides =  2, 3, 6, and 7

Divide part face = parallel to the face of vertices

It is given that a square face is present in the middle of the cube. The area of the cross-section of the cube results from the plane and cube intersection.

To find the distance between the square face of the cube and the length of the side:

distance = [tex]\sqrt{[(x^{2} - x1)^2 + (y^{2} - y1)^2 + (z^{2} - z1)^2]}[/tex]

we can use the coordinates of any two adjacent sides to find the distance.

distance = [tex]\sqrt{[(3-2)^2 + (3-2)^2 + (3-1)^2] }[/tex]

distance = [tex]\sqrt{11}[/tex]

To calculate the area of the face of the cube:

area = [tex]side^{2}[/tex]

area = [tex]\sqrt{(11)^2}[/tex]

area = 11

The area of the cross-section can be estimated as:

area = (1/2) x 11 x 4) + 5 vertices of plane

area = 16 sq. cm

Therefore we can infer that the area of the cross-section is 16 sq. cm

To learn more about the Area of Cross-section

https://brainly.com/question/13029309

#SPJ4

The distance between bus stops A and C is exactly 1 km.

To find the distance between bus stops A and C, we can use the fact that the distance from A to D is 1 km and the distance from C to D is 5 km.

This means that the total distance from A to C, passing through D, is 6 km (1 km + 5 km).

However, we need to subtract the distance between B and D (3 km) and the distance between B and C (2 km) since we don't want to double count the stretch between B and D.

Therefore, the distance between A and C is 6 km - 3 km - 2 km = 1 km.

Learn more about total distance at

https://brainly.com/question/6516113

#SPJ11

There is no convincing evidence that the proportion of Devon's serves that are good is more than 72%. The data collected does not provide sufficient evidence to support Devon's claim that he has a higher proportion of good serves than what his coach stated.

Based on Devon's hypotheses, H₀ states that p = 72%, while Hₐ states that p > 72%, where p represents the true proportion of Devon's good serves. To test this, 50 of his serves are randomly selected, and 42 are good. A simulation is conducted with 100 trials, resulting in an estimated P-value of 0.06. The significance level (α) is set at 0.05.

In this case, the P-value (0.06) is greater than the significance level (0.05). According to the rules of hypothesis testing, we should fail to reject the null hypothesis (H₀) when the P-value is greater than the significance level. Therefore, Devon should fail to reject H₀.

You can learn more about hypotheses at: brainly.com/question/18173488

#SPJ11

If the probability that this teacher is female is 3/5 , there are a total of 90 teachers at the school.

Let's denote the total number of teachers at the school as T. We know that the probability of choosing a female teacher is 3/5. Therefore, the probability of choosing a male teacher is 1 - 3/5 = 2/5.

We are also given that there are 36 male teachers at the school. We can use this information to set up an equation:

36/T = 2/5

To solve for T, we can cross-multiply:

36 x 5 = 2 x T

180 = 2T

T = 90

Therefore, there are a total of 90 teachers at the school.

To learn more about probability click on,

https://brainly.com/question/21209033

#SPJ4

Complete question is:

One of the teachers at a school is chosen at random. The probability that this teacher is female is 3/5 There are 36 male teachers at the school. Work out the total number of teachers at the school.

By 2009, it is projected that approximately 13,956 three-legged frogs will inhabit the area.

Recent studies have indicated a growing concern for the population of three-legged frogs in a specific area, as they have been exposed to chemical pollutants. In the year 2000, data estimated that there were about 5,000 three-legged frogs (N) in this area. With an annual increase of 15%, we can project the number of frogs in future years using the formula:

Future population = N * (1 + growth rate) ^ number of years

In this case, we want to determine the number of three-legged frogs in the area by 2009. To calculate this, we will use the given values:

Future population = 5,000 * (1 + 0.15) ^ (2009 - 2000)

Future population = 5,000 * (1.15)⁹

Future population ≈ 13,956

Therefore, by 2009, it is projected that approximately 13,956 three-legged frogs will inhabit the area, rounding to the nearest whole number. This increase in population highlights the potential ecological consequences of chemical pollutants on the environment and the need for further investigation and mitigation measures.

To know more about projection, refer to the link below:

https://brainly.com/question/15583437#

#SPJ11

For an individual with a femur length of 49 centimeters, we can expect their height to be approximately 177.15 centimeters.

When f=49, plugging it into the formula h=62.6+2.35f, we get h=62.6+2.35(49)=177.15.

This means that for an individual with a femur length of 49 centimeters, we would expect their height to be approximately 177.15 centimeters.

This provides an estimate of the individual's height based on the relationship between femur length and height indicated by the formula. It's important to note that this is an estimate and individual variation may exist.

To learn more about height, refer below:

https://brainly.com/question/10726356

#SPJ11

Therefore, to the nearest hundredth, the value of x is 42.31 units.

A triangle is a three-sided polygon, which is a closed shape made up of straight lines. It is one of the simplest geometric shapes and is used extensively in mathematics, science, and engineering. In a triangle, each side connects two vertices or corners, and each vertex is where two sides intersect. The three angles of a triangle always add up to 180 degrees, and the sum of the lengths of any two sides is always greater than the length of the third side. Triangles can be classified by the lengths of their sides and the sizes of their angles, which gives rise to different types such as equilateral, isosceles, scalene, acute, right, and obtuse triangles. Triangles have many applications, such as in geometry, trigonometry, physics, and engineering, and they are fundamental to understanding the properties of other shapes and mathematical concepts.

Here,

In a right triangle, the sine of an angle is defined as the ratio of the length of the side opposite the angle to the length of the hypotenuse. So, for this triangle, we have:

sin(53°) = opposite / hypotenuse

sin(53°) = x / 53

To solve for x, we can rearrange the equation as follows:

x = 53 * sin(53°)

Using a calculator to evaluate sin(53°), we get:

sin(53°) = 0.7986 (rounded to four decimal places)

Substituting this value into the equation, we get:

x = 53 * 0.7986

x = 42.308 (rounded to two decimal places)

To know more about triangle,

https://brainly.com/question/28600396

#SPJ1

The entire expression is factored completely as: 5x2(x4 + 4)(x2 + 2)(x2 - 2)

Part A:

To factor out the greatest common factor, we need to find the largest number that divides evenly into both terms. In this case, the greatest common factor is 5x2.

5x10 − 80x2

= 5x2 (x8 - 16)

Therefore, we can rewrite the expression as 5x2(x8 - 16).

Part B:

To factor the entire expression completely, we need to use the difference of squares formula, which states that:

a2 - b2 = (a + b)(a - b)

In this case, we can rewrite the expression as:

5x2(x8 - 16) = 5x2[(x4)2 - (4)2]

Notice that x8 can be rewritten as (x4)2, and 80 can be factored into 4 x 20, which gives us 16 when squared.

Using the difference of squares formula, we can factor the expression further:

5x2[(x4 + 4)(x4 - 4)]

The expression (x4 + 4) cannot be factored further, but (x4 - 4) can be factored using the difference of squares formula again:

5x2[(x4 + 4)(x2 + 2)(x2 - 2)]

Therefore, the entire expression is factored completely as: 5x2(x4 + 4)(x2 + 2)(x2 - 2)

To know more about common factor , refer here :

https://brainly.com/question/11221202#

#SPJ11