c. Boat travels north then west

A boat travels 76.0 km due north in 8.0 hours then 56.0 km due west in 5.0 hours.

Determine the direction (as a bearing) of the average velocity (to 1 decimal places) of the boat in the 8 + 5 hour period.


PLEASE HELP!!

Hi there!

We can use the following equation to find the frequency of each harmonic:

[tex]f_n = \frac{n}{2L} \sqrt{\frac{T}{\lambda}}[/tex]

n = nth harmonic

L = length of string (m)

T = Tension of string (N)

λ = linear density (kg/m)

Begin by converting the linear mass density to kg:

2.00g /m · 1 kg / 1000g = 0.002 kg/m

Now, we can use the equation to find the first three harmonics.

First harmonic:

[tex]f_1 = \frac{1}{2(0.6)} \sqrt{\frac{50}{0.002}} = \boxed{131.76 Hz}[/tex]

Second harmonic:

[tex]f_2 = \frac{2}{2(0.6)} \sqrt{\frac{50}{0.002}} = \boxed{263.52Hz}[/tex]

Third harmonic:

[tex]f_3 = \frac{3}{2(0.6)} \sqrt{\frac{50}{0.002}} = \boxed{395.28Hz}[/tex]

The work done by the man against friction is 4,192.86 J.

The given parameters;

The work done by the man against friction is calculated as follows;

[tex]W = F \times d \times cos(75)\\\\W = 540 \times 30 \times cos(75)\\\\W = 4,192.86 \ J[/tex]

Thus, the work done by the man against friction is 4,192.86 J.

Learn more here:https://brainly.com/question/19498865

Answer:

Explanation:

Δx means a change in the magnitude of the x variable, often used in reference to a number line on the horizontal axis of a plot.

a.

The components of the force are Fx = 2.2163 N, Fy = -0.5445 N and Fz = 0 N

The force on a current carrying conductor in a magnetic field is given by F = iL × B where i = current = 9.00 A, L = 25.0 cmk = 0.25 mk (since the conductor is along the z-direction). B = magnetic field. Since B has component Bx = -0.242T, By= -0.985, and Bz = -0.336, B = -0.242i + (-0.985j) + (-0.336)k = -0.242i - 0.985j - 0.336)k.

So, F = iL × B

F = 9.00 A{(0.25 m)k × [-0.242Ti + (-0.985Tj) + (-0.336T)k]T}

F = 9.00 A{(0.25 m)k × (-0.242T)i + (0.25 m)k × (-0.985Tj) + (0.25 m)k × (-0.336T)k]}

F = 9.00 A{-0.0605mT)k × i + (-0.24625 mT)k × j + (-0.084 m)k × k]}

F = 9.00 A{-0.0605mT)j + (-0.24625 mT) × -i + (-0.084 mT) × 0]}

F = 9.00 A{-0.0605mT)j + (0.24625 mT)i + 0 mT]}

F = -0.5445 AmT)j + (2.21625 AmT)i + 0 AmT]}

F = -0.5445j + 2.21625i + 0 k

F = (2.2163i - 0.5445j + 0 k) N

So, the components of the force are Fx = 2.2163 N, Fy = -0.5445 N and Fz = 0 N

b.

The magnitude of the net force on the wire is 2.282 N

The net force F = √(Fx² + Fy² + Fz²)

F = √[(2.2163 N)² + (-0.5445 N)² + (0 N)²)

F = √[(4.912 N)² + 0.2964 N)² + (0 N)²)

F = √[5.2084 N)²

F = 2.2822 N

F ≅ 2.282 N

So, the magnitude of the net force on the wire is 2.282 N

Learn more about force on a current carrying conductor:

https://brainly.com/question/16387830

Answer:

Explanation:

Plane 2 is moving north at

8.5sin20 = 2.9 m/s

Plane 2 is moving west at

8.5cos20 = 8.0 m/s

Part A

v = √((13 - 2.9)² + 8.0²) = 12.876... 13 m/s

Part B

θ = arctan((13 - 2.9) / 8.0) = 51.617... 52° N of E

Part C

13 m/s  52° S of W

relative velocity magnitude is independent of reference frame

Answer:

C

Explanation:

Definition of drug: a medicine or other substance which has a physiological effect when ingested or otherwise introduced into the body

Answer:

Explanation:

Summing moments about the CG to zero will show that the two normal forces are equal and have a value of FL = FR = 684/2 = 342 N

Pressure on the left

PL = 342 / 6.20e-4 = 551,612.9032... = 5.5e5 Pa

Pressure on the right

PR = 342 / 9.20e-4 = 371,739.1304... = 3.7e5 Pa

A) The force from the left tire is; FL = 342 N

B) The pressure from the left tire is; PL = 551613 N/m²

C) The force from the right tire is; FR = 342 N

D) The pressure from the right tire is; PR = 371739 N/m²

We see that;

FL and FR are upward forces

W is the downward force.

We know that in equilibrium;

Sum of upward forces = sum of downward forces

Thus;

FL + FR = W

We are given W = 684 N

Since W is at the center, it means that FL = FR. Thus;

FL = FR = 684/2

FL = FR = 342 N

We are given;

Contact area of left tire; AL = 6.2 × 10⁻⁴ m²

Contact area of right tire; AR = 9.2 × 10⁻⁴ m²

Formula for pressure is;

Pressure = Force/Area

Pressure on the left tire;

PL = FL/AL

PL = 342/(6.2 × 10⁻⁴)

PL = 551613 N/m²

Pressure on the t right tire;

PR = FR/AR

PR = 342/(9.2 × 10⁻⁴)

PR = 371739 N/m²

Read more at; https://brainly.com/question/21584729

This question involves the concepts of dynamic pressure, volume flow rate, and flow speed.

It will take "5.1 hours" to fill the pool.

First, we will use the formula for the dynamic pressure to find out the flow speed of water:

[tex]P=\frac{1}{2}\rho v^2\\\\v=\sqrt{\frac{2P}{\rho}}[/tex]

where,

v = flow speed = ?

P = Dynamic Pressure = 55 psi[tex](\frac{6894.76\ Pa}{1\ psi})[/tex] = 379212 Pa

[tex]\rho[/tex] = density of water = 1000 kg/m³

Therefore,

[tex]v=\sqrt{\frac{2(379212\ Pa)}{1000\ kg/m^3}}[/tex]

v = 27.54 m/s

Now, we will use the formula for volume flow rate of water coming from the hose to find out the time taken by the pool to be filled:

[tex]\frac{V}{t} = Av\\\\t =\frac{V}{Av}[/tex]

where,

t = time to fill the pool = ?

A = Area of the mouth of hose = [tex]\frac{\pi (0.015875\ m)^2}{4}[/tex] = 1.98 x 10⁻⁴ m²

V = Volume of the pool = (Area of pool)(depth of pool) = A(1.524 m)

V = [tex][\frac{\pi (9.144\ m)^2}{4}][1.524\ m][/tex] = 100.1 m³

Therefore,

[tex]t = \frac{(100.1\ m^3)}{(1.98\ x\ 10^{-4}\ m^2)(27.54\ m/s)}\\\\[/tex]

t = 18353.5 s = 305.9 min = 5.1 hours

Learn more about dynamic pressure here:

https://brainly.com/question/13155610?referrer=searchResults

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

According to above question ~

Let's find the charge (q) by using formula ~

Hence, 12 coulombs of charge flow past any point in the wire in 3 seconds

Answer:

40 volts

Explanation:

Use the equation [tex]V=IR[/tex]

[tex]V=(4)(10)[/tex]

[tex]V=40[/tex]

At the highest attitude, the  velocity of  the ball is 0 m/s, so the kinetic energy is 0 as well.

Hence the answer is potential energy because it doesn't depend on velocity .

Answer:

Explanation:

The answer:

https://www.chegg.com/homework-help/questions-and-answers/race-car-starting-rest-travels-around-circular-turn-radius-247-m-certain-instant-car-still-q402991

Total acceleration of car is 148.31 m/s².

Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center.

Given parameters:

Radius of the circular path: r = 22.5 m.

Angular speed: ω = 0.541 rad/s.

So, centripetal acceleration; α = ω²r = (0.541)² × 22.5 m/s² = 6.58 m/s².

Tangential acceleration: [tex]\alpha_t[/tex] = αr = 6.58 × 22.5 = 148.16 m/s².

Hence, total acceleration = √(α² + [tex]\alpha_t[/tex]²) = √(6.58² +148.16²) = 148.31 m/s².

Learn centripetal acceleration here:

https://brainly.com/question/14465119

#SPJ2

Answer:

im here\

Explanation:

Km values are standardized because half the Vmax (Vmax/2) is more informative than Vmax. This value (Km) can be used to calculate the affinity of the enzyme by a given substrate.

The Km (Michaelis constant) of the enzyme refers to the value in which the concentration of substrate is equal to half of its maximum velocity (Vmax/2).

This value (Km) is inversely proportional to the affinity of an enzyme by a given substrate.

An enzyme showing a high Km also exhibits a low affinity for its specific substrate, and thereby this enzyme requires a high concentration of the substrate to reach its maximum velocity (Vmax).

In consequence, the Km value is a more informative value than the maximum velocity (Vmax), which only indicates the concentration of an enzyme catalyzing a reaction under ideal conditions.

Learn more in:

https://brainly.com/question/5182881

In 60 minutes or 3600 seconds, the tip of the minute hand traverses the circumference of a circle with radius 3.00 cm, so it moves with a tangential speed of

(3.00 cm)/(3600 s) ≈ 0.00083 cm/s = 8.3 μm/s

Answer:

Heat Loss = 5 kg * 700 deg K * 220 J / (kg*deg K) = 7.70E5 J

Since there are 4.186 J/cal

Heat Loss = 7.70E5J / 4.186 J/cal = 1.84E5 cal

Heat Gain = 2000 g * 85 deg K / cal / (deg K g) + M * 540 cal/g

Heat Gain = 1.70E5 cal + M * 540 cal/g

M = (1.84 - 1.70) E5 g / 540

25.9 g

25.9 g or 25.9 cm^3 or .0259 L   of water will boil away

Explanation:

Fgravity = G*(mass1*mass2)/D²

so, if you double one of the masses, what does that do to our equation ?

Fgravitynew = G*(2*mass1*mass2)/D²

due to the commutative property of multiplication

Fgravitynew = 2* G*(mass1*mass2)/D² = 2* Fgravity

so, the correct answer will be 2×45 = 90 units.

Answer:

TRUE

FALSE

TRUE

TRUE

TRUE

TRUE

Explanation:

1. Most EM waves has the same speed. True

2. EM waves travel at the speed of 4x108 m/s. False

3. Electromagnetic waves are transverse waves consisting of changing electric fields and changing magnetic fields. True

4. Electromagnetic waves transfer energy through a vacuum. True

5. A wave is a disturbance that transfers energy. True

The mechanical advantage of ramp A is greater than others and it will require the least force to move the load to greater distance.

The mechanical advantage of the ramp is calculated as follows;

[tex]M.A = \frac{L}{h}[/tex]

The mechanical advantage of the ramp B, C, D and E is calculated as;

[tex]M.A = \frac{L}{h} \\\\[/tex]

The mechanical advantage of the ramp A is calculated as follows;

[tex]M.A = \frac{2L}{h} \\\\M.A = 2(\frac{L}{h} )[/tex]

Since the length of the ramp A is greater than other ramps, the mechanical advantage will be greater and it will require the least force to move the load to greater distance.

Learn more about mechanical advantage of ramps here: https://brainly.com/question/20367895

-cant travel through space since there's no molecules to travel through

-sound travels 4.3 times faster in water than air

-sounds are waves that pass through our ears via vibrations and travel by vibrations of molecules

-different types of sound like audible, inaudible, infrasonic, ultrasonic,

-sounds waves are either longitudinal, mechanical and pressure waves

-sound travels at 767 miles per hour

Answer:

physics that deals with the mechanical action or relations of heat.

Answer:

Small particles of dust and pollution in the air can contribute to (and sometimes even enhance) these colors, but the primary cause of a blue sky and orange/red sunsets or sunrises is scattering by the gas molecules that make up our atmosphere. Large particles of pollution or dust scatter light in a way that changes much less for different colors.

Explanation:

The modern atomic model is called the nuclear atomic model.

Therefore the correct answer is option C.

There are many types of atomic models proposed in past based on their individual assumptions and the experimentations

John Dalton's atomic model.

The Plum Pudding Model, developed by J.J. Thomson,

Rutherford's model provided an explanation for the presence of a nucleus inside the atom.

In accordance with the current atomic model, atoms have a nucleus made up of protons and neutrons and an ethereal gradient or cloud surrounding them that houses electrons;

The modern atomic model is called the nuclear atomic model.

Thus, the correct answer is option C.

To learn more about the atomic models here, refer to the link;

brainly.com/question/9145431

#SPJ2

Explanation:

These prefixes are very commonly used in naming chemical compounds.

Di- means two.

For example, carbon dioxide's formula is be written as [tex]\text{CO}_2,[/tex] and it has 2 oxygen atoms, hence "di-oxide."

Tetra - means four.

For example, carbon tetrachloride's chemical formula is written as [tex]\text{CCl}_4[/tex], and there are four chlorine atoms

Deca- means ten

For example, lanthanum decahydride's chemical formula is written as [tex]\text{LaH}_{10}.[/tex] In this case there are 10 hydrogen atoms for every lanthanum atom.

Hepta - means seven

For example, iodine heptafluoride is written as [tex]\text{IF}_7[/tex]. Note the seven fluorine atoms attached to the iodine atom, hence the name "hepta-fluoride."

Explanation:

The orbiting period of a satellite at a height h from earth' surface is

T=2πr32gR2

where r=R+h.

Then, T=2π(R+h)R(R+hg)−−−−−−−−√

Here, R=6400km,h=1600km=R/4

T=2πR+R4−−−−−−√R(R+R4g)−−−−−−−−−⎷=2π(1.25)32Rg−−√

Putting the given values,

T=2×3.14×(6.4×106m9.8ms−2)−−−−−−−−−−−−√(1.25)32=7092s=1.97h

Now, a satellite will appear stationary in the sky over a point on the earth's equator if its period of revolution around the earthh is equal to the period of revolution of the earth up around its own axis whichh is 24h. Let us find the height h of such a satellite above the earth's suface in terms of the earth,'s radius.

Let it be nR.Then

T=2π(R+nR)R(R+nRg)−−−−−−−−−−√

=2π(Rg)−−−−−√(1+n)32

=2×3.14(6.4×106m/s9.8m/s2)−−−−−−−−−−−−−−−⎷(1+n)32

(5075s)(1+n)32=(1.41h)(1+n)32

For T=24h, we have (24h)=(1.41h)(1+n)32

or (1+n)32=241.41=17

or 1+n(17)23=6.61

or n=5.61

The height of the geostationary satellite above the earth's surface is nR=5.61×6400km=6.59×104km.