The solubility of AgCN in a solution containing 1.0M H Ksp of AgCN is 2.2e-12 Ka of HCN is 6.2e-10 is 5.9 x 10^-2M.
Given concentration of H+ (M) = 1.0M
Ksp of AgCN = 2.2e-12
Ka of HCN = 6.2e-10
AgCN ⇋ Ag+ +CN− ................Ksp
CN − + H+ ⇋ HCN................... 1/Ka
AgCN + H+ ⇋ HCN + Ag+ ...................Ksp/Ka = K0
K0 = 2.2e-12/6.2e-10 = 0.0035 = 35 x 10-4
At Equilibrium: AgCN + H+ ⇋ HCN + Ag+
Let the moles of [Ag+] = x
So the number of moles of [HCN] = x
K0 = [Ag+] [HCN] / [H+]
35 x 10-4 = x^2/1
x = 5.9 x 10^-2M
Hence the molar solubility of AgCN in buffer solution is 5.9 x 10^-2M.
To learn more about solubility click here https://brainly.com/question/28170449
#SPJ4
is there a pattern to the location of planets based on their density ?
Yes!
Explanation:
If density is greater, the object sinks. Saturn is mainly composed of the lightest two gases known, hydrogen and helium. It is the only planet in our solar system whose density is less than water.
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA HELP
Answer:
c
c
Explanation:
mark me brainliest pls
what is the concentration of HCl solution if 20.4 mL of a 1 M NaOH solution was needed to completely react with 25 ml of hcl
The concentration of the HCl solution is 0.816 M (or 816 mM).
To determine the concentration of the HCl solution, we can use the balanced equation for the neutralization reaction between HCl and NaOH:
HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)
This reaction is a neutralization reaction, which means that the number of moles of H+ ions (from the HCl) is equal to the number of moles of OH- ions (from the NaOH).
Given that 20.4 mL of a 1 M NaOH solution was needed to completely react with 25 ml of HCl, we can use the volume and molarity of the NaOH solution to determine the number of moles of OH- ions:
Molarity = moles of solute/litres of solution
Moles of OH- = (20.4 mL x 1 M) / 1000 mL/L = 0.0204 moles
Since the number of moles of H+ ions is equal to the number of moles of OH- ions, we can use the number of moles of OH- to determine the number of moles of H+ ions:
moles of H+ = moles of OH- = 0.0204 moles
We can then use the number of moles of H+ ions and the volume of the HCl solution to determine the concentration of the HCl solution:
Molarity = moles of solute/litres of solution
concentration of HCl = moles of H+ / (25 mL / 1000 mL/L) = 0.0204 moles / 0.025 L = 0.816 M (or 816 mM)
Therefore, the concentration of the HCl solution is 0.816 M (or 816 mM).
Learn more about Neutralization Reaction here: https://brainly.com/question/28970253
#SPJ4
What is the measurement of expired CO2 that typically provides a numeric display of the partial pressure of CO2 in torr or mmHg
The measurement of expired CO₂ that typically provides a numeric display of the partial pressure of CO₂ in torr or mmHg is the capnometry.
The capnometry measurement of the CO₂ , carbon dioxide is the measurement in the expired air and it provides the clinician with the noninvasive measurement of systemic metabolism and the ventilation. it is used to determine the correlation in between the tidal CO₂ and the partial CO₂ in the non intubated breathless patents.
Thus, the measurement if the expired CO₂ that shows the partial pressure of the CO₂ is the capnometry.
To learn more about pressure here
https://brainly.com/question/9226237
#SPJ4
Beryllium iodide + strontium sulfate --->
Normal:
Complete ionic:
Net ionic:
Normal
BeI2 + SrSO4 → SrI2 + BeSO4
Complete ionic:
Be2+ + 2I- + Sr2+ + SO42- → Sr2+ + 2I- + Be2+ + SO42-
Net ionic:
Be2+ + 2I- → Sr2+ + 2I- + Be2+
The complete ionic equation for this reaction is the same as the normal equation, except that the reactants and products are written as their respective ions.
The net ionic equation is the same as the complete ionic equation, except that the spectator ions, which are ions that appear on both the reactant and product sides, are omitted.
In this reaction, strontium sulfate and beryllium iodide react to form strontium iodide and beryllium sulfate. The spectator ions are Sr2+ and 2I-, which appear on both sides of the equation and cancel out, leaving the net ionic equation.
For more questions like Ionic equation click the link below:
https://brainly.com/question/30006628
#SPJ4
De acuerdo con la Ley de la Conservación de la Materia postulada por Lavoisier, ¿cuál ecuación química está balanceada? A C2H5OH(l) + O2(g) → CO2 + H2O B C2H5OH(l) + O2(g) → 2CO2 + H2O C C2H5OH(l) + 3O2(g) → 2CO2 + 3H2O D C2H5OH(l) + O2(g) → 2CO2 + 3H2O E 2C2H5OH(l) + 3O2(g) → 2CO2 + 3H2O
Answer:
C C2H5OH(l) + 3O2(g) → 2CO2 + 3H2O
Explanation:
La ley de conservación de la materia implica que en una reacción química los átomos en los reactivos son iguales a la cantidad de átomos en los productos:
A C2H5OH(l) + O2(g) → CO2 + H2O
En los reactivos hay dos átomos de carbono pero en los productos solo 1. De esta manera, no cumple la ley de conservación.
B C2H5OH(l) + O2(g) → 2CO2 + H2O
En los reactivos hay 6 átomos de hidrógeno pero en los productos solo 2. No cumple la ley de conservación.
C C2H5OH(l) + 3O2(g) → 2CO2 + 3H2O
En los reactivos y productos hay: 2 átomos de carbono, 6 átomos de hidrógeno y 7 átomos de oxígeno. Cumple la ley de conservación.
D C2H5OH(l) + O2(g) → 2CO2 + 3H2O
En los reactivos hay 3 átomos de oxígeno y en los productos 7. No cumple la ley de conservación.
E 2C2H5OH(l) + 3O2(g) → 2CO2 + 3H2O
En los reactivos hay 4 átomos de carbono y en los productos solo dos. No cumple la ley de conservación.
What are the possible stress or disturbances for chemical reactions
Which of the following alkenes cannot be converted into an alkyne by reacting it with bromine followed by an excess of sodium amide and then with water? X X II III DIVE, III and IV II &IX
Among the following alkenes (D) IV cannot be converted into an alkyne by reacting it with bromine followed by an excess of sodium amide and then with water.
An alkene must first be brominated by an addition reaction that produces a vicinal dibromide in order to transform it into an alkyne. All alkenes that have at least one double bond double substituted render them unsuitable for this method due to the requirement of this vicinal dibromide. This is so that the alkane can undergo a double elimination and produce an alkene, which needs at least one C-H and C-X bond. This hinders the conversion of molecule IV into an alkyne.
The dibromo alkane would change into the provided alkene by losing one unit of HBr if it were to react with bromine. However, the second beta-elimination cannot take place since there isn't hydrogen that is physically linked to the alkene carbon. So (D) IV is the right option.
You can also learn about dibromide from the following question:
https://brainly.com/question/11530316
#SPJ4
True or False: The bowling ball pendulum didn’t hit Bill Nye in the face because the amount of kinetic energy can never be more than the amount of potential energy, some of the energy is transferred to heat.
The bowling ball pendulum didn’t hit Bill Nye in the face because the amount of kinetic energy can never be more than the amount of potential energy, some of the energy is transferred to heat. This statement is true.
Why didn't the bowling ball pendulum hit Bill Nye in the face?The bowling ball pendulum did not hit Bill Nye in the face because potential energy will always be greater than kinetic energy. When a force (a push or a pull) acts on something over a long distance, this occurs.
For instance, if the object is positioned at a higher height, its kinetic energy will be higher. Potential energy is not transferable and varies with object mass, height, and distance.
Thus, The bowling ball pendulum didn’t hit Bill Nye in the face because the amount of kinetic energy can never be more than the amount of potential energy, some of the energy is transferred to heat.
To learn more about the bowling ball pendulum, follow the link;
https://brainly.com/question/21052088
#SPJ1
la actual definición de un elemento es
Answer:
La definición de un elemento es una parte o aspecto de algo abstracto, especialmente uno que es esencial o característico.
changing the subscripts of chemicals can mathematically balance the equation. why is it unacceptablle
To balance a chemical equation, you can only adjust the coefficients; you cannot change the subscripts. The ratios of the atoms in the molecule and the resulting chemical characteristics are altered by changing subscripts.
What occurs if the subscript in a chemical equation is changed?Changing the coefficients solely affects the quantity of molecules in that specific chemical. However, modifying the subscripts will change the substance itself, rendering your chemical equation incorrect.
What distinguishes altering a subscript from altering a coefficient in a chemical formula?You can determine the substance from the subscript. You can find out how much of each element is present in the molecule. The substance itself would change if it were altered. In contrast, simply altering the coefficient results in a change in the number of molecules.
To learn more about chemical equation visit;
https://brainly.com/question/28294176
#SPJ4
The picture below shows an open field with wildflowers.
Which of the following is NOT a way that this environment supports populations of bees?
Answer:
no picture you need add it
Explain why estuaries, salt marshes, and mangrove forests have more variation in salinity than other marine habitats like the ocean and sea floor.
completely saturated with salt to freshwater. ... Salt marshes, estuaries, and mangrove forests are each unique ecosystems in ... These areas often serve as nursing grounds where young marine life is ... Several reptiles reside in the salt marsh habitat,
Describe how solid ammonium chloride can be separated from a solid mixture of ammonium chloride and anhydrous chloride
Answer: Solid ammonium chloride can be separated from a solid mixture of ammonium chloride and anhydrous chloride through the process of sublimation.
Explanation:
A process in which solid substance converts directly into gas without undergoing liquid state is called sublimation.
For example, when solid ammonium chloride is heat in the apparatus then it will convert directly into vapors without undergoing liquid state. During this process it leaves behind anhydrous chloride into the mixture itself.
When these vapors are cooled down at the surface of funnel then it gives ammonium chloride in the solid state.
Thus, we can conclude that solid ammonium chloride can be separated from a solid mixture of ammonium chloride and anhydrous chloride through the process of sublimation.
If sunlight is breaking down p-nitrophenol molecule, which of the 5 basic
reactions is happening?
Answer:
Chemical reaction, not physical
Explanation:
If Si bonds with O, what type of bond is it? *
Answer:
covalent bond
the answer is short I don6 know why brainly is telling me it needs to be 20 characters long
What are memory B cells and memory T cell
Answer: Memory B and memory T cells are types of lymphocytes.
Explanation:
Memory B cells forms the part of adaptive immune system. These cells develop inside the germinal centers of the secondary lymphoid organs. These cells circulate in the blood. These are produced by the bone marrow and can be found in tonsil and spleen. Memory B cells are responsible for recognizing previous infections with a foreign antigen and prepare antibody against the new infection. Memory T cells recognize the antigen lived in the body for longer and produce quick response against it on second exposure. These are one of the types of T lymphocytes.
What is the ph and poh of a solution made by adding water to 15 grams of hydrochloric acid until the volume of the solution if 2500 mL
Answer:
pH= 0.8
pOH= 13.2
Explanation:
Number of moles = mass/molar mass
mass= 15 g
molar mass =36.5 g/mol
Number of moles = 15 g/36.5 g/mol = 0.4 moles
From;
n= CV
Where;
C= concentration of solution
V= volume of solution
n= Number of moles
C = n/V
n= 0.4 moles
V= 2500mL or 2.5 L
C= 0.4/2.5
C= 0.16 M
Hence [H^+] = 0.16 M
pH= - log [H^+]
pH= 0.8
pOH= 14 - pH
pOH= 14 - 0.8
pOH= 13.2
What is the percent by volume of isopropyl alcohol in a solution made by mixing 120 mL of the alcohol with enough water to make 350 mL of solution?
Answer: The percent by volume of isopropyl alcohol in a solution made by mixing 120 mL of the alcohol with enough water to make 350 mL of solution is 25.5%.
Explanation:
Given: Volume of solute = 120 mL
Volume of solvent = 350 mL
Now, total volume of the solution is as follows.
[tex]V_{total} = V_{solute} + V_{solvent}\\= 120 mL + 350 mL\\= 470 mL[/tex]
Let us assume that 100 mL of solution is taken and the amount of isopropyl alcohol present in it is as follows.
[tex]\frac{V_{solute}}{V_{total}} \times 100 mL\\\frac{120 mL}{470} \times 100 mL\\= 25.53 mL[/tex]
Hence, there is 25.53 mL isopropyl alcohol is present in 100 mL of solution. Therefore, %v/v is calculated as follows.
[tex]Percent (v/v) = \frac{25.53 mL}{100 mL}\\= 25.5%[/tex]
Thus, we can conclude that the percent by volume of isopropyl alcohol in a solution made by mixing 120 mL of the alcohol with enough water to make 350 mL of solution is 25.5%.
Balance the following double displacement reaction and determine the coefficients of all of the reactants and products.
___ BaCl2 +___ Na2CO3 --> ___ BaCO3 + ___ NaCl
This double displacement reaction and the coefficients of all the reactants and products in this balanced chemical reaction is Bacl₂ + Na₂CO₃ = BaCO₃ + 2Nacl.
What is a double displacement reaction?A double displacement reaction is a particular type of reaction in which two reactants swap ions to produce two new molecules. Water-soluble ionic compounds interact with one another in a number of double displacement processes.
What is the meaning of coefficients?Coefficients are the numbers or expressions put in front of a chemical symbol or formula to balance chemical equations. It provides information on the number of atoms or molecules of the drug or chemical that are a part of the reaction.
What is a chemical reaction?When two or more compounds come into touch with one another and create a new substance, the process is known as a chemical reaction (s). Reactants or reagents are the name(s) for the substance(s) or substances that are initially incorporated into the chemical process. Chemical reactions typically involve a chemical change and produce one or more products, which typically differ from the reactants in some ways.
To know more about double displacement reaction, check out:
https://brainly.com/question/23918356
#SPJ1
A gas occupies 43.0 L of space at 225 ℃. Calculate the final temperature of the gas if it is compressed to 20.6 L of space.
Answer:
[tex]T_2=238.57^{\circ} C[/tex]
Explanation:
Given that,
Initial volume, V₁ = 43 L
Initial temperature, T₁ = 225℃ = 498 K
Final volume, V₂ = 20.6 L
We need to find the final temperature. We know that, the relation between volume and temperature is given by :
[tex]V\propto T\\\\\dfrac{V_1}{V_2}=\dfrac{T_1}{T_2}\\\\T_2=\dfrac{T_1V_2}{V_1}[/tex]
Put all the values,
[tex]T_2=\dfrac{498\times 20.6}{43}\\\\T_2=238.57^{\circ} C[/tex]
So, the final temperature is equal to [tex]238.57^{\circ} C[/tex].
What reagent causes the observed visual change in a positive Lucas test?
The observed visual change from a clear and colourless characteristic to a turbid, cloudy, and hazy characteristic, in a positive Lucas test, is caused by the Lucas reagent.
The Lucas Test is used to detect the presence of a primary alcohol.
When the test is positive, the mixture of the primary alcohol with the Lucas reagent changes from a clear and colourless characteristic to a turbid, cloudy, and hazy characteristic. This visual change is due to the reaction of the primary alcohol with the Lucas reagent which is a mixture of concentrated hydrochloric acid and zinc chloride.
The Lucas Test is used to detect the presence of a primary alcohol, and when a positive result is obtained, the reaction of the primary alcohol with the Lucas reagent, a mixture of hydrochloric acid and zinc chloride, causes the visual change from a clear and colourless characteristic to a turbid, cloudy, and hazy one.
learn more about lucas test here
https://brainly.com/question/14687410
#SPJ4
can someone label these?
1. Label
A. sediment
B. weathering & erosion
C. sedimentary rock
D. Igneous rock
E. Melting
2. label
A. Sediment
B.weathering & erosion
C. Sedimentary rock
D. Igneous rock
E. Melting
3. Label
A. Sediment
B.weathering & erosion
C. Sedimentary rock
D. Igneous rock
E. Melting
4. Label
A. Weathering & erosion
B. Sedimentary rock
C. Igneous rock
D.Melting
E. Heat &pressure
5. Label
A. Weathering & erosion
B. Sedimentary rock
C. Igneous rock
D.Melting
E. Heat &pressure
6. Label
A. Weathering & erosion
B. Sedimentary rock
C. Igneous rock
D.Melting
E. Heat &pressure
2. How many grams would be in a 2.75 mole sample of carbon (C)?
a. 0.2299
b. 4.379
c. 33.0 g
d. 1.66x10279
Answer:
b is your answer
Explanation:
What type of circuit does this figure represent?
parallel circuit
series circuit
short circuit
open circuit
Two lengths of wire connect opposite sides of a battery to contacts on opposite sides of lightbulb one, then lightbulb two, and then lightbulb three.
HELP NOWWWWWWW I WILL MARK BRANILEST!!
Answer:you answer would be B
Explanation:and I'm bc I took the rest lol
Parellel Curcuit Explanation: I took the Test On k12
world production of ammonia is now about 30 times greater than it was in 1950 suggest why the demand for ammonia is increased
There are a few reasons why the demand for ammonia has increased over time:
Population growth: The world's population has grown significantly over the past 70 years, and as the population has grown, so has the demand for food. Ammonia is a key ingredient in the production of fertilizers, which are used to help grow crops and increase food production. As the population has increased, so has the demand for fertilizers, which has contributed to the increase in the production of ammonia.Industrialization: As more countries have industrialized and developed, there has been an increased demand for ammonia to use as a feedstock in the production of chemicals, plastics, and other industrial products.Energy production: Ammonia can be used as a source of renewable energy, and there has been an increased demand for clean energy sources in recent years. This has led to an increase in the production of ammonia for use in energy production.Environmental concerns: Ammonia can be used to reduce greenhouse gas emissions, and there has been an increased focus on finding ways to reduce environmental impact. This has led to an increase in the production of ammonia for use in environmental applications.Hope This Helps You!
A flask contains a mixture of N2 and O2 at STP. If the partial pressure of N2 is 40 kPa, what's the mole fraction o
A flask contains a mixture of N₂ and O₂ at STP. If the partial pressure of N₂ is 40 kPa, the partial pressure of O₂ is 61.325 kPa.
STP is the abbreviation which is used for a Standard Temperature and Pressure. The standard temperature is 273 K as well as the standard pressure is 1 atm pressure.
1 atm = 101.325 kPa
According to Dalton's law, state's that the sum of the individual pressures exerted by the gases in a mixture is the total pressure.
[tex]P_{total}[/tex]= [tex]P_{A}[/tex] + [tex]P_{B}[/tex]
Therefore, [tex]P_{total}[/tex]= [tex]p_{n2}[/tex] + [tex]P_{O2}[/tex]
[tex]P_{N2}[/tex] = 40kPa
[tex]P_{total}[/tex] = 101.325kPa
101.325kPa = 40kpa + [tex]P_{O2}[/tex]
[tex]P_{O2}[/tex] = 61.325kpa
--The given question is incorrect, the correct question is
--"A flask contains a mixture of N₂ and O₂ at STP. If the partial pressure exerted by the N₂ is 40.0 kPa, the partial pressure of O₂ is?"--
To know more about temperature here
https://brainly.com/question/11464844
#SPJ4
Which solution is the least concentrated? 4 moles of solute dissolved in 6 liters of solution? 4 moles of solute dissolved in 6 liters of solution? 1 mole of solute dissolved in 1 liter of solution? 1 mole of solute dissolved in 1 liter of solution? 8 moles of solute dissolved in 4 liters of solution? 8 moles of solute dissolved in 4 liters of solution? 3 moles of solute dissolved in 2 liters of solution?
Answer:
The solution that is least concentrated is the one containing 4 moles of solute dissolved in 6 liters of solution .
Explanation:
Concentration is defined as the amount of a substance in a given apquantitybof solvent or solution. The unit of concentration is usually given as mol/litre
Mathematically, concentration = Number of moles of solute/ volume of solution in litres.
To determine the solution that is least concentrated from the given solutions, their concentrations in mol/L is calculated.
Concentration of solution containing 4 moles of solute dissolved in 6 liters of solution = 4 mol/6 litres = 0.67 mol/L
Concentration of solution containing 1 mole of solute dissolved in 1 litre of solution = 1 mol/ 1 litre = 1 mol/L
Concentration of solution containing 1 mole of solute dissolved in 1 liter of solution = 1 mol/ 1 litre = 1 mol/L
Concentration of solution containing 8 moles of solute dissolved in 4 liters of solution = 8 moles / 4 litres = 2 mol/L
Concentration of solution containing 8 moles of solute dissolved in 4 liters of solution = 8 moles/ 4 litres = 2 mol/L
Concentration of solution containing 3 moles of solute dissolved in 2 liters of solution = 3 moles / 2 litres = 1.5 mol/L
Therefore, the solution that is least concentrated is the one containing 4 moles of solute dissolved in 6 liters of solution .
1.) The property by the virtue of which the metals can be beaten into sheets.
2) Observe the even set up and answer the questions that follow
PLEASE HELP ME
Answer:
1.) The property by the virtue of which the metals can be beaten into sheets.
Malleability
Click it while asking question it allow u to paste image.
Step 2: measure the area of the top of the syringe
The top of the syringe is a circle. You need to compute area for use in lead to computations of pressure valves. Start by using a ruler to measure the diameter. Estimate to the nearest. 1 cm
3. 60 cm
Divided by two to find the radius. Maintain significant figures
1. 80 cm
Substitute the radius into the formula pie r 2 To find the area of the top of the syringe. Maintain significant figures
10. 2 cm
The syringes' circle measures area 10.17 square inches.
The area of a circle is the area that a circle occupies on a two-dimensional plane. The region contained by the circle's radius or perimeter is another way to define the circle's area. The circle's radius, or r, is equal to its diameter in half.
The diameter given is 3.60cmThe radius given is 1.80cmWe need to calculate the area of the circle
You may determine the circle's surface area via
Change the formula's value for r.
Area of circle =π[tex]r^{2}[/tex]
Area of circle =3.14[tex]\times[/tex]1.80[tex]\times[/tex]1.80
Area of circle =10.17 [tex]cm^{2}[/tex]
Hence the area of the Circle is 10.17[tex]cm^{2}[/tex]
Learn more about area.
brainly.com/question/27683633
#SPJ4