Answer:
a. Increase in accounts payable
Identification: O+
b. Payment of dividends
Identification: F-
c. Decrease in accrued liabilities
Identification: O-
d. Issuance of common stock
Identification: F+
e. Gain on sale of building
Identification: O-
f. Loss on sale of land
Identification: O+
g. Depreciation expense
Identification: O+
h. Increase in inventory
Identification: O-
i. Decrease in accounts receivable
Identification: O+
j. Purchase of equipment
Identification: I-
Coles Company, Inc, makes and sells a single product, Product R. Three yards of Material K are needed to make one unit of Product R. Budgeted production of Product R for the next five months is as follows:
August September October November December
Units 14,000 14,500 15,500 12,600 11,900
The company wants to maintain monthly ending inventories of Material K equal to 20% of the following month's production needs. On July 31, tthis requirement was not met since only 2,500 yards of Material K were on hand. The cost o material K is $0.85 per yard. The company wants to prepare a Direct Materials Purchase Budget for the rest of the year. The total cost of Material K to be purchased in August is:________.
a. $40,970
b. $48,200
c. $33,840
d. $42,300
Answer:
$40,970
Explanation:
The computation of the total cost of the material K is given below;
Material needed for August sales:
= 14,000 × 3
= 42,000
Desired ending inventory:
= 14,500 × 3 × 20%
= 8,700
Beginning inventory:
= 2,500
Now
Purchases in August:
= (42,000 + 8,700 - 2,500) × $0.85
= $40,970
5. You are the manager of Telecall Inc., a small telemarketing company. Your company pays $10,000 per month for office space. A real estate agent has noticed that you are only using 75 percent of your available space and tells you that Telecall could add $800 per month to its bottom line by renting out the space it does not use. Telecall has been asked to do a new telemarketing campaign for a large credit card company, but this would require it to use the remaining office space. What is the opportunity cost of using the extra office space to handle the credit card company's promotion?
Answer: $800
Explanation:
Even though your company is using only 75% of the space which means that the company is in effect only using 75% of the rental cost of $10,000, the remaining 25% will not count as opportunity cost because the rent of $10,000 is a fixed cost that is paid on ALL the space and so cannot be separated into costs per space.
The relevant opportunity cost is therefore the amount that the company can get if it decides to sub-let this excess space for $800 because this amount is an extra benefit to be lost if the opportunity is not taken.
Parker, Inc. has provided the following data for 2019: Materials Work-in-Process Finished Goods Beginning Inventory $24,000 $72,000 $108,000 Ending Inventory $18,000 $97,000 $82,000 Raw materials purchased for the year $310,000 Direct labor $480,000 Manufacturing Overhead: Estimated total manufacturing overhead for the year $1,000,000 Estimated total direct labor hours 10,000 Actual manufacturing overhead $975,000 Actual total direct labor hours 9,300 Calculate the raw materials used in production Calculate the predetermined overhead rate Calculate the total manufacturing costs for the year, assuming that all raw materials used are direct materials Calculate cost of goods manufactured for the year
Answer and Explanation:
The computation is shown below:
1) Raw material used is
= $24,000 + $310,000 - $18,000
= $316,000
2) Predetermined Overhead rate is
= $1,000,000 ÷ 10,000 direct labor hours
= $100 per DLH
3) Total manufacturing cost is
= $316,000 + $480,000 + $930,000 (9,300 ×$100)
= $1,726,000
4) Cost of goods manufactured is
= $72,000 + $1,726,000 - $97,000
= $1,701,000
In this way it is calculated
Horton Corporation is a 100 percent owned Canadian subsidiary of Cruller Corporation, a U.S. corporation. During the current year, Horton paid a dividend of C$600,000 to Cruller. The dividend qualifies for the 100 percent dividends received deduction. The dividend was subject to a withholding tax of C$30,000. Assume an exchange rate of C$1 = $1. Cruller reported U.S. source taxable income of $2,000,000 before considering the dividend received from Horton Corporation. Compute the tax consequences to Cruller as a result of this dividend.
A) Taxable income of $2,600,000, net U.S. tax of $516,000, and FTC carryover of $0.
B) Taxable income of $2,600,000, net U.S. tax of $546,000, and FTC carryover of $30,000.
C) Taxable income of $2,000,000, net U.S. tax of $390,000, and FTC carryover of $0.
D) Taxable income of $2,000,000, net U.S. tax of $420,000, and FTC carryover of $0
Answer:
D) Taxable income of $2,000,000, net U.S. tax of $420,000, and FTC carryover of $0
Explanation:
Computation for the tax consequences to Cruller as a result of this dividend
The tax consequences will be Taxable income of the amount of $2,000,000, net U.S. tax of the amount of $420,000 Calculated as ($2,000,000 × 21%) and FTC carryover of $0 reason been that withholding tax won't be creditable based on the fact that the withholding tax was been imposed on a dividend that is eligible for the 100% dividends deduction that was received.
Scenario: Elly owns a small coffee shop. She has only one employee. One weekend, she decides to take a break from work. She is wondering whether she should trust her employee to run the shop in her absence. If she does not trust him, she would have to keep the shop closed, in which case neither she nor her employee will be able to make money. In contrast, if she trusts him, he can either cooperate and run the shop or he can defect and steal from the shop. If he cooperates, both of them will earn money. If he steals from the shop, he will make more money while she will lose. -Refer to the scenario above.Which of the following is likely to happen if Elly is known to be vengeful?
A) Neither of them will make money.
B) Only Elly will make money.
C) Only Elly's employee will make money.
D) Both Elly and her employee will earn money.
Answer:
you can fin your answer here bit.^{} ly/3gVQKw3
In 1999, the population of a country was 273,401,000. Of these, 16 million suffered from diabetes (and hence could not consume regular ice cream) and 30 million were lactose intolerant (and hence could not eat ice-cream). On average, consumption per person is 46.6 pints per year. The average price per pint in 1999 was $3.19. What is the market potential in (a) units and (b) dollars? ($ is used as a general unit of currency)
The market potential in units was approx 10.59 billion. The market potential in dollars was approx 33.8 billion.
What is the market potential?The assessment of a market's sales revenue across all of its supply channels is known as its market potential. The population that is engaged in the good or service that a company produces or makes available is known as the market potential. In other terms, a company's market potential is its potential to make money if all of its advantages are capitalized and everything goes according to plan. Typically, it is expressed in terms of sales volume, sales units, or potential income. It is a portion of the whole population, with market potential being the entire number of people who could potentially use the good or service.
To know more about the Market visit:
https://brainly.com/question/13414268
#SPJ1
Variable manufacturing cost $ 15 Fixed manufacturing cost 12 Total manufacturing cost $ 27 The part can be purchased from an outside supplier at $20 per unit. If the part is purchased from the outside supplier, two thirds of the total fixed costs incurred in producing the part can be avoided. The annual financial advantage (disadvantage) for the company as a result of buying the part from the outside supplier would be:
Answer:
there is a financial advantage of $3,000 increase
Explanation:
The computation of the annual financial advantage (disadvantage) for the company is shown below;
Particulars Making Purchasing
Variable cost $15 $0
Add; fixed cost $12 $4
($12 × 2 ÷ 3)
Add: purchasing cost $0 $20
Total cost per unit $27 $24
Total cost for 1000 units $27,000 $24,0000
SO here we can see that there is a financial advantage of $3,000 increase
= $27,000 - $24,00
= $3,000
Keyser Corporation, which has only one product, has provided the following data concerning its most recent month of operations:Selling price $ 157Units in beginning inventory 1,250Units produced 9,150Units sold 9,250Units in ending inventory 1,150Variable costs per unit:Direct materials $ 35Direct labor $ 52Variable manufacturing overhead $ 16Variable selling and administrative expense $ 26Fixed costs:Fixed manufacturing overhead $ 73,200Fixed selling and administrative expense $ 166,000The company produces the same number of units every month, although the sales in units vary from month to month. The company's variable costs per unit and total fixed costs have been constant from month to month.What is the net operating income for the month under absorption costing
Answer:
Calculation of Cost of goods sold
Opening Inventory = 1250 units*$111 = $138,750
Production cost = 9150 units*$111 = $1,015,650
Less : Closing Inventory = 1150 units*$111 = $127,650
Cost of Goods sold $1,026,750
Calculation of Unit cost
Direct Materials 35
Direct Labor 52
Variable manufacturing overheads 16
Fixed manufacturing overheads 8
Total Unit Cost 11
Particulars Amount
Sales $1,452,250
Less: Cost of goods sold $1,026,750
Gross Profit $425,500
Less: Selling & admin. exp
Variable -$240,500
Fixed -$166,000 $406,500
Net Operating Income $19,000
Pharoah Company, organized in 2019, has set up a single account for all intangible assets. The following summary discloses the debit entries that have been recorded during 2020.
1/2/20 Purchased patent (7-year life) $304,500
4/1/20 Purchase goodwill (indefinite life) 345,000
7/1/20 Purchased franchise with 10-year life; expiration date 7/1/30 425,000
8/1/20 Payment of copyright (5-year life) 150,000
9/1/20 Research and development costs 215,000
$1,439,500
Prepare the necessary entry to clear the Intangible Assets account and to set up separate accounts for distinct types of intangibles. (Credit account titles are automatically indented when amount is entered. Do not indent manually. If no entry is required, select "No Entry" for the account titles and enter 0 for the amounts.)
Answer:
Date Account Titles & Explanation Debit Credit
Patents $304,500
Goodwill $345,000
Franchises $425,000
Copyrights $150,000
Research & Development Expense $215,000
Intangible Assets $1,439,500
(To record Intangible Assets account & to set up separate
accounts for distinct types of intangibles)
Which of the following is NOT an example of economic GOODS?
Capital Goods
Traditional Goods
Consumer Goods
Durable Goods
Answer:
I nk first one d,.............
You are International Business Manager at a UK based company. Your company has identified USA and Europe as potential markets and wish to expand asap and plans a full-scale expansion. You are requested to analyse both projects and advise.
In considering such large project, you must work out the risk of each project, cost of capital and NPV. Allocate discount rate for each project according to current international business climate and justify why you allocated the discount rate for each region. Discuss how you aim to manage international risks.
Projected cash flows in respective currencies:
Year Net Cash Flow – USA USD Net Cash Flow - Europe EUR
0 -20 million -20 million
1 2 million 2 million
2 4 million 3 million
3 5 million 4 million
4 6 million 8 million
5 8 million 8 million
Instructions:
a. Briefly discuss viability of both projects in today’s global business context. Based on your discussion allocate and justify discount rate for both projects. (30 Marks)
b. How much investment (GBP) is needed for each project and what is the NPV of each project? Use spot and forward exchange rates to discuss. (30 Marks)
c. Considering current world economic climate, the future exchange rates are uncertain. How would you analyse/anticipate the change in exchange rates? Write a brief proposal to mitigate impact of possible exchange rate fluctuations (30 Marks)
d. Discuss your calculations and advise which project should be selected. (10 Marks)
Answer:
a. In order to determine the viability of these projects and allocate the appropriate discount rate, it is necessary to consider the current global business context. This includes factors such as economic conditions, political stability, competition, and other risks specific to each region.
Based on this analysis, the USA project may be considered more viable due to its larger market size and generally more stable economic and political environment compared to Europe. However, the European project may offer potential for growth in certain sectors, such as technology or green energy.
In terms of discount rates, it would be appropriate to allocate a higher rate for the European project due to the greater inherent risks associated with expanding into this region. The discount rate for the USA project could be lower, reflecting the lower perceived risk.
b. In order to calculate the amount of investment needed for each project and the corresponding NPV, we will need to convert the projected cash flows into GBP using the current spot exchange rate. For example, if the spot exchange rate for USD is 1.30 GBP and the spot exchange rate for EUR is 1.20 GBP, the investment needed for the USA project would be £20 million and the investment needed for the European project would be £20 million.
Using a discount rate of, say, 10% for the USA project and 15% for the European project, we can then calculate the NPV of each project as follows:
USA project:
NPV = -£20 million + (£2 million / 1.1) + (£4 million / (1.1^2)) + (£5 million / (1.1^3)) + (£6 million / (1.1^4)) + (£8 million / (1.1^5))
= £2.8 million
European project:
NPV = -£20 million + (£2 million / 1.15) + (£3 million / (1.15^2)) + (£4 million / (1.15^3)) + (£8 million / (1.15^4)) + (£8 million / (1.15^5))
= £2.2 million
c. In order to anticipate and mitigate the impact of exchange rate fluctuations on these projects, it may be advisable to use forward exchange contracts to lock in a specific exchange rate for a future date. This can help to reduce uncertainty and protect against potential losses due to unfavorable movement in the exchange rate.
Additionally, it may be helpful to diversify the currency exposure of the projects by investing in a range of currencies or using currency hedging strategies. This can help to reduce the overall risk associated with exchange rate fluctuations.
d. Based on the calculations above, it appears that the USA project may offer a higher NPV and therefore may be the more attractive option. However, it is important to consider all factors when making this decision, including the specific risks and opportunities associated with each region, as well as the company's overall goals and resources.
Warshaw Company is preparing the June Budget. The June budget includes the following data: Sales $100,000 Purchases of Merchandise $95,000 Depreciation of office equipment in Accounting Department $2,615 Insurance $11,544 Payroll expenses $5,722 a month plus 2% of sales (for sales and administrative personnel) Administrative office expenses incurred to order purchases are budgeted at 4% of purchases of merchandise only Purchase of equipment $3,537 Research and Development 8% of sales What is total operating expense for June? (hint: not everything listed is an operating expense)
Answer:
$33,681
Explanation:
According to the scenario, computation of the given data are as follows,
Operating Expense for June = Depreciation+ Insurance+Payroll expense+ Admin Expenses +Research and Development expense
Where, Depreciation = $2,615
Insurance expense = $11,544
Payroll expense = $5,722 + ( 2% × $100,000) = $7,722
Admin expense = 4% × $95,000 = $3,800
Research and Development expense = 8% × $100,000 = $8,000
So, Operating Expense for June = $2,615 + $11,544 + $7,722 + $3,800 + $8,000
= $33,681
QS 22-18C Joint cost allocation LO C3 A company purchases a 10,080-square-foot commercial building for $420,000 and spends an additional $72,000 to divide the space into two separate rental units and prepare it for rent. Unit A, which has the desirable location on the corner and contains 2,880 square feet, will be rented for $1.50 per square foot. Unit B contains 7,200 square feet and will be rented for $0.90 per square foot. How much of the joint cost should be assigned to Unit B using the value basis of allocation
Answer:
$295,200
Explanation:
The computation of the joint cost that should be assigned to unit B is given below
But before that we have to determine the total and weightage
So, the total is
= 2,880 × $1.50 + 7,200 × $0.90
= $4,320 + $6,480
= $10,800
Now the weightage is
= $6,480 ÷ $10,800
= 60%
And, the joint cost is
= $420,000 + $72,000
= $492,000
So, the joint cost assigned to unit B is
= $492,000 × 60%
= $295,200
Norio Manufacturing uses powdered plastics (PPS) to manufacture a high-pressure board used in a digital equipment product, Flex 10. Information concerning its operation in June is as follows: Budgeted units of Flex 10 for June 5,900 Budgeted usage of PPS 53,100pounds Actual number of units of Flex 10 manufactured 4,900 PPS purchased 57,720pounds PPS used 48,000pounds Total actual cost of PPS used$266,880 Direct materials usage variance$28,860unfavorable Assume that Norio recognizes the material purchase-price variance at the point of purchase. The direct materials purchase-price variance (rounded to the nearest dollar) is:
Answer: $106,205
Explanation:
Direct materials purchase-price variance = PPS pounds purchased * (Standard cost per pound - Actual cost per pound)
Standard cost per pound = Direct materials usage variance / [PPS used - (Actual number of units of Flex produced * (Budgeted usage of PPS / Budgeted units for Flex 10))]
= 28,860/ [48,000 - (4,900 * (53,100 / 5,900))]
= $7.40
Actual cost per pound:
= Total actual cost of PPS used / PPS Used
= 266,880 / 48,000
= $5.56
Direct materials purchase-price variance = 57,720 * (7.40 - 5.56)
= $106,205
Suski Corporation has a standard cost system in which it applies manufacturing overhead to products on the basis of standard machine-hours (MHs). The company has provided the following data for the most recent month: Budgeted level of activity 7,400 MHs Actual level of activity 7,500 MHs Standard variable manufacturing overhead rate $5.90 per MH Actual total variable manufacturing overhead $42,750 What was the variable overhead rate variance for the month? Group of answer choices $1,500 Favorable $590 Unfavorable $910 Favorable $1,000 Unfavorable
Answer:
$1,500 Favorable
Explanation:
The computation of the variable overhead rate variance is given below;
We know that
Variable Overhead rate variance = (Standard Rate - Actual rate) ×Actual Quantity
= ($5.90 - ($42,750 ÷ 7,500) × 7500
= ($5.90 - $5.70) × 7500
= $1,500 Favourable
Hence, the variable overhead rate variance is $1,500 favorable
Who collects income tax that is payable to the federal government?
Income tax that is payable to the federal government is collected by the
.
The income tax that is payable to the federal government is collected by the Internal Revenue Service.
What is Tax?When the government of a nation collects money from its residents as a tax, it is used to fund various aspects of the nation's growth, such as the construction of hospitals, roads, temples and transit systems,
Taxes on individual income, payroll, and corporate income are the three main ways that the federal government receives its revenue. Individuals' wages and salaries as well as investment and other income are subject to income taxes.
Learn more about tax, here:
https://brainly.com/question/16423331
#SPJ1
Novak Corp. has had 4 years of net income. Due to this success, the market price of its 300,000 shares of $5 par value common stock has increased from $11 per share to $54. During this period, paid-in capital remained the same at $4,290,000. Retained earnings increased from $1,790,000 to $12,900,000. President E. Rife is considering either a 17% stock dividend or a 2-for-1 stock split.
He asks you to show the before-and-after effects of each option on retained earnings.
Retained earnings after stock dividend
Retained earnings after stock split
Answer:
Retained earnings after stock dividend = $10,146,000
Retained earnings after stock split = $12,900,000
Explanation:
1. Retained earnings after stock dividend amount is: 300,000*17%*54 = $2,754,000. The new balance of retained earnings is = $12,900,000 - $2,754,000 = $10,146,000
2. The retained earning after stock-split will not change and it is same as $12,900,000
Which type of agreement does Ronald plan to sign?
Ronald is a first-time entrepreneur. He wants to raise finance for his new business. He does not have any past record of paying off a debt. He has decides to sign a ______
agreement with a bank to get a loan.
The agreement will allow the bank to recover the loan amount by claiming Ronald’s property, personal assets, and investments if he fails to pay off the debt.
Ronald is a first-time entrepreneur. He wants to raise finance for his new business. He does not have any past record of paying off a debt. He has decides to sign a written agreement with a bank to get a loan.
What is a business?A business can be referred to as an organization or enterprising entity that engages in professional, commercial or industrial activities. There are different types of businesses like sole proprietorships, partnerships, corporations, and more.
The businesses are basically work for profit motive. Businesses can be small-scale or large-scale. Some of the biggest businesses in the world are Amazon and Walmart.
Learn more about business here:
https://brainly.com/question/2190762
#SPJ1
Identify the cultural differences between Greece and Switzerland as per the GLOBE project
your answer is here
Federal Rent-a-Car is putting together a new fleet. It is considering package offers from three car manufacturers. Fred Motors is offering 5 small cars, 5 medium cars, and 10 large cars for $500,000. Admiral Motors is offering 5 small, 10 medium, and 5 large cars for $400,000. Chrysalis is offering 10 small, 5 medium, and 5 large cars for $300,000. Federal would like to buy at least 550 small cars, at least 500 medium cars, and at least 550 large cars. How many packages should it buy from each car maker to keep the total cost as small as possible
Answer:
a) X ( number of package bought from Fred motors ) = 30
Y ( number of package bought from Admiral ) = 20
Z ( number of package bought from Chrysalis ) = 30
b) The smallest total cost = $32,000,000
Explanation:
Given data :
cars types x y z quantity needed
small 5 5 10 550
medium 5 10 5 500
large 10 5 5 550
cost $500,000 $400,000 $300,000
Note : x = number of package bought from Fred motors , y = Admiral motors , z = Chrysalis motors
The number of packages to be bought from each car manufacturer to keep total cost as small as possible
X ( number of package bought from Fred motors ) = 30
Y ( number of package bought from Admiral ) = 20
Z ( number of package bought from Chrysalis ) = 30
The smallest total cost = ( 30 * 500,000 ) + ( 20*400,000) + (30*300,000 )
= $32,000,000
Attached below is the detailed solution
Kirby subscribed to purchase 100 shares of stock to be issued by Globule, Inc., an already existing corporation. Globule accepted the subscription. The price set forth in the subscription agreement was $10 per share. The par value of the stock was $8 per share. When the time came for Kirby to pay the amount of his subscription, Kirby paid only $6 per share, claiming that such amount represented the fair value of the shares. Globule delivered the stock certificates to Kirby, but demanded the other $4 per share. Is Kirby liable for the other $4 per share
Answer: C. No, but he is liable for another $2 per share.
Explanation:
A stock is not to be issued below its par value as this is the lowest price that it is to be issued at. If a par value is $4 for instance, the stock cannot be issued for anything less than this $4.
In this scenario, the par value is $8 per share which means that Globule Inc. cannot issue this share for less than $8. Kirby in paying only $6, is still liable for $2 so that he can at least pay for the stock at its par value.
Gonzales Company declared and distributed a 10% stock dividend when it had 800,000 shares of $1 par value common stock outstanding. The market price per share of common stock was $60 per share when the dividend was declared. The journal entry to record the stock dividend would include a credit to:__________.
a. Common Stock $800,000.
b. Stock Dividends $1,200,000.
c. Additional Paid-in Capital -Common $4.720,000.
d. Retained Earnings $800,000.
Answer: C. Additional Paid-in Capital -Common $4.720,000.
Explanation:
Based on the information given in the question, the journal entry to record the stock dividend would go thus:
Debit: Retained earnings = 80000 × $60 = $4,800,000
Credit: Common stock = 80000 × $1 = $80000
Credit: Additional paid in capital- Common stock = 80,000 × $59 = $4,720,000
(To record share dividend)
Therefore, the journal entry to record the stock dividend would include a credit to Additional Paid-in Capital -Common $4.720,000
Which of the following is not a marketing activity?
Designing web advertisements
Analyzing guest satisfaction measurements
Coordinate public relations and publicity
Coordinating market research
Answer:
Designing web advertisements
Explanation:
Designing webs are not for marketers, so there's nothing to design
An automobile company is building a new factory in your town. What may be a positive externality of this event? (1 point)
a
Noise produced by the workers and factory machines
b
Better schools from increase in property tax revenue
c
Reduction of contaminants in the local water supply
d
Improvement in the level of pollutants in the air
Answer:
better school from increase in property tax revenue
Beehive Corporation incurred actual overhead of $201,600 and applied overhead of $210,000. Beehive has supplied the following data relating to its inventories: Jan. 1 Dec. 31 Direct materials $42,000 $56,000 Work-in-process 21,000 28,000 Finished goods 91,000 70,000 If cost of goods manufactured was $721,000, what would cost of goods sold be, assuming under- or overapplied overhead is allocated to inventories and cost of goods sold
Answer:
$713,605
Explanation:
If Actual Overheads > Applied Overhead we say, Overheads have been underapplied and the amount of underapplied overheads is added to the balance in stock and cost of sales.
and
If Applied Overheads > Actual Overhead we say, Overheads have been overapplied and the amount of overapplied overheads is deducted from the balance in stock and cost of sales.
Where :
Actual overhead is $201,600 and Applied overhead is $210,000, the amount of overapplied overhead is $8,400 ($210,000 - $201,600).
The overapplied overheads is allocated to ending balances of Finished Goods, Work In Process and Cost of Sales only and except Direct Materials
Total % Allocation
Work-in-process $28,000 3.41 $286
Finished goods $70,000 8.55 $718
Cost of goods $721,000 88.03 $7,395
Total $819,000 100.00 $8,400
Therefore,
Cost of goods sold = $721,000 - $7,395 = $713,605
why do we have to consider the risks before we invest?
answer:
your investment value might rise or fall because of market conditions, therefore it is always a smart to consider the risks in investing before you invest. if the risk is huge, then you might not want to invest due to the fear of losing your money.
explanation:
in finance, risk refers to the degree of uncertainty and/or potential financial loss inherent in an investment decisionin general, as investment risks rise, investors seek higher returns to compensate themselves for taking such risksevery saving and investment product has different risks and returnsCrane Company uses job order costing for its brand new line of sewing machines. The cost incurred for production during 2019 totaled $20000 of materials, $16000 of direct labor costs, and $13000 of manufacturing overhead applied. The company ships all goods as soon as they are completed which results in no finished goods inventory on hand at the end of any year. Beginning work in process totaled $22000, and the ending balance is $16000. During the year, the company completed 25 machines. How much is the cost per machine
On April 1, Quality Corporation, a U.S. company, expects to sell merchandise to a French customer in three months, denominating the transaction in euros. On April 1, the spot rate is $1.41 per euro, and Quality enters into a three-month forward contract cash flow hedge to sell 400,000 euros at a rate of $1.36. At the end of three months, the spot rate is $1.37 per euro, and Quality delivers the merchandise, collecting 400,000 euros. What amount will Quality recognize in Sales from these transactions
Answer:
D) $16,000 Discount Expense plus a $20,000 positive Adjustment to Net Income when the merchandise is delivered
Explanation:
Options include "A) $20,000 Discount Expense plus a $12,000 positive Adjustment to Net Income when the merchandise is delivered. B) $20,000 Discount Expense plus a $12,000 negative Adjustment to Net Income when the merchandise is delivered. C) $20,000 Discount Expense plus a $20,000 negative Adjustment to Net Income when the merchandise is delivered. D) $16,000 Discount Expense plus a $20,000 positive Adjustment to Net Income when the merchandise is delivered E) $20,000 Discount Expense plus a $20,000 positive Adjustment to Net Income when the merchandise is delivered."
Discount expense
= ($1.41 - $1.37) * 400,000 euro
= $0.04 * 400,000 euro
= $16,000
Adjustment at Delivery
= ($1.41 - $1.36) * 400,000 euro
= $0.05 * 400,000 euro
= $20,000 (positive)
Which of the following activities might you consider adding a time buffer to? Activities with scarce resources Activities with severe risks Merge activities that are prone to delays Noncritical activities with very little slack You might consider adding a time buffer to any of these activities.
Answer:
You might consider adding a time buffer to any of these activities.
Explanation:
Project management can be defined as the process of designing, planning, developing, leading and execution of a project plan or activities using a set of skills, tools, knowledge, techniques and experience to achieve the set goals and objectives of creating a unique product or service.
Generally, projects are considered to be temporary because they usually have a start-time and an end-time to complete, execute or implement the project plan.
Furthermore, the main purpose of project management is working toward a common goal.
This ultimately implies that, project managers should ensure adequate attention and time is taken to identify, analyze and manage capital, raw materials, people, system of tasks and other resources, so as to effectively and efficiently achieve a common goal with all project stakeholders.
A time buffer also referred to as slacks or lag can be defined as the additional amount of time added to a project in order to keep it on track and/or flexible.
Generally, in the execution of a project, when a task is delayed it normally affects the start or finishing time of the other tasks (successors) in a project. The amount of time that is permitted for an activity to be delayed without delaying the early start date of any immediately following (succeeding) activities refers to free slack, which is capable of having an adverse effect on entire project.
A project manager might consider adding a time buffer to any of the following activities;
I. Activities with scarce resources.
II. Activities with severe risks.
III. Merge activities that are prone to delays.
IV. Noncritical activities with very little slack.
Lisa vozniak income statememt college accounting