Answer:
Energy sources do not have 100% efficiency because the processes of energy conversion to usable forms involves energy losses.
Some have lower efficiencies due to; energy losses in form of heat during conversion, poor technology applied during conversion of energy and lack of desire equipment to use in the energy conversion system.
Explanation:
The desired form of energy for use is derived from conversion of energy from the source using an energy converter into another form which is usable. The efficiency of the energy converter is calculated as;
л = output energy/input energy
The efficiency of energy is limited to the cost of equipment required for conversion from energy source by the energy converter to a form which is usable. Additionally, because energy sources are scarce, the technology to use in energy conversion is a factor affecting energy efficiency in that high efficiency will require advanced technology with better equipment leading higher costs of that energy form. when heat losses are involved during energy conversion, efficiency lowers, thus its better if such losses are used as energy input in another system.
what is the mass number? plz help!
Answer:
I believe it is 2?
Explanation:
;v;
Mrs. K is trying to rearrange her living room. She uses 150 N of force to move a 600 g table. The table does not move. How much work is done?
90,000 J
4 J
600 J
0 J
Answer:
0J
Explanation:
Work = Force * Distance
Since the distance (or the displacement) in this problem is 0, hence, no work is done. W = 150*0 = 0. The mass of the object is just trying to trick you. Hopes this helps!
What are the main characteristics for the definition of work?
Answer:
1-There Must be some displacement in the direction of force. 2-Angle between force and displacement is 0°.
What is the relationship between a white dwarf and black dwarf?
Answer:
No longer emitting heat or light, the white dwarf will become a black dwarf. Because it emits no radiation, it is nearly impossible to see. However, the black dwarf would still retain its mass, allowing scientists to detect the effects produced by its gravitational field.
Explanation:
Answer:
white dwarfs are hot, black dwarfs are cold
Explanation:
a white dwarf is a slowly burning and aging corpse of a main sequence star such as our sun. they are up to 40 times hotter then the sun, ranking among one of the hottest objects in the universe, except their luminosity is so low that all their heat stays in them basically forever.
On the other hand, a black dwarf is a theoretical ending to a white dwarf, over the course of trillions of years, white dwarfs cool down into black dwarfs. black dwarfs rank among the coldest possible temperature. We aren't sure if these are really a thing, because we still haven't given white dwarfs enough time to cool down.
they are located between each of the atrium and ventricle to prevent blood from flowing backwards, what is it?
a large office building is 1.07x10^2m long,31m wide. and 4.25x10^2m high. what id the volume?
If a large office building is 1.07 x 10^2 meters long, 31 meters wide. and 4.25 x 10^2 meters high, then the volume of the building would be 1409725 meters cube.
What is density?It can be defined as the mass of any object or body per unit volume of the particular object or body. Generally, it is expressed as in gram per cm³ or kilogram per meter³.
As given in the problem we have to calculate the volume of a large office building having the dimensions of 1.07 x 10 ^2 meters long, 31 meters wide, and 4.25 x 10^2 meters high.
The volume of the office building = length × width × height
=107 × 31 × 425
=140925 meters cube
Thus, the volume of the building would be 140925 meters cube.
To learn more about density from here, refer to the link;
brainly.com/question/15164682
#SPJ2
the number of atoms in 2.0 moles of B is
Answer:
The answer is
1.204 × 10²⁴ atoms of BExplanation:
To find the number of entities of a substance given it's number of moles we use the formula
N = n × Lwhere n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question
n = 2.0 moles
We have
N = 2 × 6.02 × 10²³
We have the final answer as
1.204 × 10²⁴ atoms of BHope this helps you
Number of moles of boron (B) = 2
To Find :We have to find number of atoms present in the given amount of boron[tex].[/tex]
Solution :➤ We know that 1 mole of substance contains 6.022×10²³ particles (atoms/molecules).
Avogadro's no. = 6.022 × 10²³★ Number of atoms present in B :
⭆ N = n × [tex]\sf{N_A}[/tex]
N denotes number of atomsn denotes mole number[tex]\sf{N_A}[/tex] denotes avogadro's number⭆ N = 2 × 6.022 × 10²³
⭆ N = 12.044 × 10²³
⭆ N = 1.2 × 10²⁴
Hope It Helps!Periodic trends
PLEASE HELP ME OUTT!! I WILL GIVE BRAINLIEST!
Answer:
A. Ba
C. Cu
D. H
Explanation:
HOPE THIS HELPS
Which term names the longest geologic time frame?
Answer:
Precambrian
Explanation:
Answer:
An Eon
Explanation:
epcohs are the shortest geologic time frame, which make up periods, that make up eras, that make up eons.
what is meant by the Terrestrial and Hydrologic parts of Earth?
Not sure what you exactly mean, but I think what you are talking about are the spheres of earth (Lithosphere, Hydrosphere, Atmosphere, and Biosphere.)
Lithosphere (Terrestrial) is the land on earth. Hydrosphere (Hydrologic) is the water on earth.
I'm not sure if this is 100% correct but I'm guessing this is what you are referring to. It could be different across different science classes.
name the elements that determine the weather of a place....
Which expression represents the number 0.00017 written in scientific notation?
A.1.7 x 10-3
B.1.7 x 103
C.1.7 x 104
D. 1.7 x 10-4
Answer:
D
Explanation:
Move the decimal and count the places
PLEASE HELP ASAP How many moles are there in 2.25 x 10^25 atoms of Zinc?
How many atoms are there in 9500.0 mg of Fluorine?
Answer:
There are 6.023 x 10^23 fluorine atoms.
Explanation:
the order of particle in all substance is the same
A True
B false
Answer:
false false false false
Use the information below to explain why the atomic radius decreases across a period.
Answer:
Detail is given below.
Explanation:
Atomic radius trend along period:
As we move from left to right across the periodic table the number of valance electrons increases. The atomic size tend to decrease in same period of periodic table because the electrons are added with in the same shell. When the electron are added, at the same time protons are also added in the nucleus. The positive charge is going to increase and this charge is greater in effect than the charge of electrons. This effect lead to the greater nuclear attraction. The electrons are pull towards the nucleus and valance shell get closer to the nucleus. As a result of this greater nuclear attraction atomic radius decreases and ionization energy increases because it is very difficult to remove the electron from atom and more energy is required.
we can see in picture A there is one positive charge and force of attraction is 2.30×10⁻⁸ N
In picture D there are 2 positive charge and force of attraction is 4.60×10⁻⁸ N
So by increasing the positive charge force of attraction also increases.
In F we can see there is more positive charge thus force of attraction is also greater.
the final step of the scientific method is to ____ the results
Answer:
The final step of the scientific method is to communicate the results
Can somebody please explain the heat formula to me? q=mcΔt
Thank you!!
Answer:
Explanation:
It describes how much heat must be added to a unit of mass of a given substance to raise its temperature by one degree Celsius. ... The mass m, specific heat c, change in temperature ΔT, and heat added (or subtracted) Q are related by the equation: Q=mcΔT.
Answer:
The formula q=mcΔt explained below
Explanation:
so q represents the amount of heat energy. M is the mass of the object and c is the temperature of the object. Δt also known as delta is the change in temperature. It would be the final temperature minus the original temperature.
What is the correct formula for calcium dihydrogen phosphate?
A) CaH2PO4
B) Ca(H2PO4)2
C) Ca(H2HPO4)2
D) Ca2H2PO4
Answer:
B) Ca(H2PO4)2
Explanation:
To solve this we must be knowing each and every concept related to chemical formula. Therefore, the correct option is option B among all the given options.
What is chemical formula?The chemical formula is indeed a means of expressing information about just the chemical proportion of atoms that comprise a certain chemical compound as well as molecule through the use of chemical element numbers and symbols.
Furthermore, the molecular formula does not contain any words and does not serve as a chemical name. However, it just indicates basic chemical structures and is not the same as the entire chemical structural formula. The correct formula for calcium dihydrogen phosphate is Ca(H[tex]_2[/tex]PO[tex]_4[/tex])[tex]_2[/tex].
Therefore, the correct option is option B among all the given options.
To know more about chemical formula, here:
https://brainly.com/question/29031056
#SPJ2
How many mL are in 7.3 dL?
Answer:
730 mL which is .73 L
Explanation:
HELP ME ASAP PLEASE BIG POINTs
Answer:
1.cation
2.anion
Explanation:
the plus is always cation and the negative is anion
Answer:
1. cation
2. anion
Explanation:
A positive ion is always cation and the negative ion is anion
HELP PLEASE! There is a water-filled continental rift in Iceland. What type of plate boundary would cause this rift? *
A. convergent
B. divergent
C. transform
Lithospheric plates move because of the movement of the ___________________________ under them.
A. lower mantle
B. asthenosphere
C. outer core
D. inner core
Answer:
B. Divergent
The rift formed in the Divegent tectonic boundary between the North America and Eurasian Plates and is located now in Iceland (Im sorry im not good at explaining)
3. What is SI system? Why has SI system been developed? Give reasons
What property of helium could be used to separate it from natural gas?
Answer: temperature liquefaction
Explanation: At the exact time the only used method or strategy the division of helium from natural gas is low temperature liquefaction
17 POINTS!!! JUST DO A B C D PLS!!!! PLS DONT COMMENT IF YOU DONT KNOW IT ITS DUE BY TOMORROW AND I CANT KEEP WASTING POINTS PLS
Answer:
A B C D E
Explanation:
How does the goal of science compare to the goal of
engineering?
Answer:
The goal of science is compared to engineering because engineering is there to solve problems while science is to explain natural phenomena
Explanation:
Nitrogen-7 configuration
Explanation:
Electronic configuration of Nitrogen -
₇N = 1s² 2s² 2p³
(Plz help ASAP) List at least three different sources used for naming organisms
Answer:
kingdom, phylum, class, order, family, genus and species.
Explanation:
True/False (A= True & B =False) 46. Blood is a tissue. 47. Elastic cartilage is found in the ears, nose, epiglottis and larynx. 48. If you have a neoplasm you hope it is benign. 49. All cancers are neoplasms but not all neoplasms are cancer. 50. Plasma cells produce Histamine 51. The liver is one organ that can partially regenerate because it is made of epithelial cells 52. Keratin is a waterproofing protein found in epithelial cells
Answer:
46.A 47.B 48.B 49.A.50.A.51.B.52.B
The answer of the questions serially is true, false,false ,true,true,false and false where blood is a tissue which circulated by the pumping organ that is heart.
What is heart?
Heart is a muscular organ which is present in most of the animals , it is responsible for pumping blood via the blood vessels to the entire body.The blood which is pumped carries oxygen and nutrients along with it.Along with it on it's way back to heart it carries carbon dioxide to the lungs.
Heart has an approximate size of a closed fist and is present between the lungs in the middle compartment of the chest. It is divided in to for chambers , the upper chambers called atria and lower ones called ventricles.
The wall of the heart is made up of three layers : epicardium,myocardium and endocardium. It pumps blood with a rhythm which is determined by a group of cells which are called the pacemaker cells present in the sinoatrial node.
Learn more about heart,here:
https://brainly.com/question/16566688
#SPJ5
Please help me!! Look at the picture to understand the question please!
Which of these red outlined elements is most similar to Chlorine (CL)?
A. He
B. I
C. AI
Answer:
C. I
Explanation:
The elements are categorized in groups and periods. The periods are horizontal and the groups are vertical. The elements in the same group (vertical) have very similar characteristics.
Definition of periodic trends