If 84g of urea (CH4N2O) is dissolved in 1400. G of chloroform, what is the elevation in the boiling point? Kb for benzene is 2. 67 Co/m

The root mean square velocity for N2 gas at 11.8 degrees Celsius is approximately 84.15 m/s.

Here's a step-by-step explanation:

1. Convert the given temperature from Celsius to Kelvin: 11.8 degrees Celsius + 273.15 = 284.95 K.

2. Recall the root mean square velocity (v_rms) formula for a gas:
v_rms = √(3RT/M), where R is the gas constant, T is the temperature in Kelvin, and M is the molar mass of the gas in kg/mol.

3. Identify the molar mass (M) of N2 gas. Nitrogen has an atomic mass of 14.0067, and since it's a diatomic molecule (N2), we have to multiply that by 2: 14.0067 * 2 = 28.0134 g/mol. Convert this to kg/mol: 28.0134 / 1000 = 0.0280134 kg/mol.

4. Substitute the given values into the formula:
v_rms = √(3 * 8.3145 J K^-1 mol^-1 * 284.95 K / 0.0280134 kg/mol).

5. Solve for v_rms:
v_rms = √(3 * 8.3145 * 284.95 / 0.0280134) ≈ √(7082.04098) ≈ 84.15 m/s.

So, the root mean square velocity for N2 gas at 11.8 degrees Celsius is approximately 84.15 m/s.

To know more about velocity, visit:

https://brainly.com/question/17127206#

#SPJ11

The weight of water is converted to true volume because the volume of water can be affected by temperature, pressure, and dissolved impurities. The three corrections that are considered are thermal expansion correction, atmospheric pressure correction, and dissolved impurities correction.

The thermal expansion correction takes into account the fact that water expands or contracts with temperature changes. As the temperature of water increases, its volume increases, and vice versa. The correction factor is calculated based on the temperature of the water and the coefficient of thermal expansion of water.

The barometric or atmospheric pressure correction is applied because the pressure of the surrounding air can affect the volume of water. The correction factor is calculated based on the atmospheric pressure and the vapor pressure of water at the given temperature.

The dissolved impurities correction is applied because dissolved substances, such as salts or gases, can also affect the volume of water. The correction factor is calculated based on the concentration of dissolved substances in the water.

To know more about thermal expansion, refer here:

https://brainly.com/question/14092908#

#SPJ11

The molecular weight of the hydrocarbon is 165.83 g/mol and its molecular formula is[tex]C2Cl4[/tex].

Since the empirical formula of the hydrocarbon is [tex]CCl2[/tex], we can assume that it contains one carbon atom and two chlorine atoms.

Let's first calculate the molar mass of the empirical formula:

The atomic weight of carbon is 12.01 g/mol

The atomic weight of chlorine is 35.45 g/mol

The empirical formula mass is therefore 12.01 g/mol + 2(35.45 g/mol) = 83.91 g/mol

To find the molecular formula, we need to know the molecular weight of the compound. We can use the ideal gas law to calculate the number of moles of the gas:

PV = nRT

where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the ideal gas constant (0.0821 L·atm/mol·K), and T is the temperature in Kelvin.

First, we need to convert the pressure from torr to atm:

785 torr = 1.036 atm

We also need to convert the temperature from Celsius to Kelvin:

150°C + 273.15 = 423.15 K

Now we can solve for the number of moles:

n = PV/RT

n = (1.036 atm)(4.93 g/L)/(0.0821 L·atm/mol·K)(423.15 K)

n = 0.208 mol

The molar mass of the compound is the mass divided by the number of moles:

mass = n × molar mass

molar mass = mass / n

molar mass = (0.208 mol) × (4.93 g/L) / (1 L/mol)

molar mass = 1.025 g/mol

Finally, we can find the molecular formula by comparing the molar mass of the empirical formula to the molar mass of the compound:

molecular weight / empirical formula weight = n

where n is an integer. We can calculate n as follows:

n = molecular weight / empirical formula weight

n = 1.025 g/mol / 83.91 g/mol

n = 0.0122

n is close to 1/2, so we can double the empirical formula to get the molecular formula:

[tex]C2Cl4[/tex]

Therefore, the molecular weight of the hydrocarbon is 165.83 g/mol (2 × 83.91 g/mol) and its molecular formula is [tex]C2Cl4[/tex].

To know more about hydrocarbon refer to-

https://brainly.com/question/31643106

#SPJ11

The volume of the expensive ice cream is: 0.

Densities of the cheap and expensive ice creams, we need to first convert the weights of the ice creams from pounds to kilograms.

1 pound = 0.453592 kilograms

Therefore, the weight of the cheap ice cream in kilograms is:

5 pounds * 0.453592 kilograms/pound = 2. 027 kilograms

The weight of the expensive ice cream in kilograms is:

0 pounds * 0.453592 kilograms/pound = 3. 903 kilogram

The volume of a gallon of ice cream is approximately 3785 milliliters. Therefore, the volume of the cheap ice cream is:

027 kilograms / 3785 milliliters = 0.000557 cubic meters

The volume of the expensive ice cream is:

903 kilograms / 3785 milliliters = 0.00091 cubic meters

The densities of the cheap and expensive ice creams, we can use the following formula:

density = mass / volume

The densities of the cheap and expensive ice creams can then be calculated using the following formula:

density = mass / volume

The mass of the cheap ice cream is:

027 kilograms

The volume of the cheap ice cream is:

0.000557 cubic meters

Therefore, the density of the cheap ice cream is:

027 kilograms / 0.000557 cubic meters = 35. 14 kilograms/cubic meter

The mass of the expensive ice cream is:

903 kilograms

The volume of the expensive ice cream is: 0.

Learn more about volume Visit: brainly.com/question/27710307

#SPJ4

In the complete catabolism of glucose, two molecules of acetyl-CoA are produced. In the complete catabolism of fatty acids, the number of acetyl-CoA molecules produced varies depending on the length of the fatty acid chain.

For example, a 16-carbon fatty acid would produce eight molecules of acetyl-CoA. In the complete catabolism of amino acids, the number of acetyl-CoA molecules produced varies depending on the specific amino acid being catabolized.

Overall, the production of acetyl-CoA is an important step in the cellular respiration process, as it enters the Krebs cycle and eventually leads to the production of ATP.

Understanding the different ways in which acetyl-CoA is produced can provide insight into the metabolism of different types of nutrients and the importance of maintaining a balanced diet.

To know more about fatty acid click on below link:

https://brainly.com/question/30712004#

#SPJ11

The calories of heat transferred by the sample were 1526.06.

The amount of heat transferred by the sample can be calculated using the equation
Q = m x c x ΔT

where:
Q = heat transferred (in calories)
m = mass of the sample (in grams)
c = specific heat capacity of antimony (in cal/(g·°C))
ΔT = temperature change of the sample (in °C)

Substituting the values:
Q = 983.6 g x 0.049 cal/(g·°C) x 31.51 °C
Q = 1526.06 calories

So, the heat transferred by the 983.6 g sample of antimony with a temperature change of +31.51 °C is approximately 1526.06 calories. Specific heat capacity is a property of a material that describes the amount of heat required to raise the temperature of one gram of the material by one degree Celsius. This property can be used to calculate the amount of heat transferred during temperature changes.

To learn more about specific heat capacity visit:

https://brainly.com/question/27991746

#SPJ11

When you measure current, you are measuring the number of: c. Electrons that pass a point in one second.

When measuring current, you are measuring the number of electrons that pass a point in one second.

Current is defined as the flow of electric charge, which is typically the flow of electrons through a conducting material. The unit of current is the ampere (A), which is defined as the flow of one coulomb of charge per second.

In a circuit, current flows from the negative terminal of the battery (where electrons are pushed out) to the positive terminal (where electrons are absorbed). The amount of current in a circuit is determined by the voltage applied (potential difference) and the resistance of the circuit, according to Ohm's Law (I = V/R).

Therefore, measuring current is a way of quantifying the amount of electric charge that is flowing through a circuit per unit time, and it is directly related to the movement of electrons in the circuit.

To know more about Ohms law:

https://brainly.com/question/14296509

#SPJ11

Yes, this evidence supports the claim that mass is conserved in a chemical reaction because the reaction equation is balanced.

This means that the same number of atoms of each element is present in the reactants as in the products. This is the fundamental principle of conservation of mass, which states that mass is neither created nor destroyed during a chemical reaction.

The conservation of mass can also be verified by calculating the total mass of the reactants and comparing it to the total mass of the products.

If the same amount of mass is present in both reactants and products, then the reaction equation is balanced and the conservation of mass is supported.

Know more about Chemical reaction here

https://brainly.com/question/29039149#

#SPJ11

The fact that the rate of the reaction between NO₂ and CO is independent of [CO] does not necessarily mean that CO is a catalyst for the reaction.

A catalyst is a substance that increases the rate of a reaction without being consumed in the reaction itself. In this case, if CO were a catalyst, it would be expected that the rate of the reaction would increase with increasing CO concentration. However, the fact that the rate of the reaction is independent of [CO] suggests that CO is not acting as a catalyst.

Instead, this result suggests that the reaction is not dependent on the concentration of CO, and that the reaction is likely to be a second-order reaction with respect to NO₂. This means that the rate of the reaction is determined by the concentrations of both NO₂ and CO, but the rate is not affected by the concentration of CO itself. Therefore, CO is not acting as a catalyst in this reaction.

To know more about the Reaction, here

https://brainly.com/question/13196831

#SPJ4

Since Q is less than K, the reaction will proceed towards products to reach equilibrium. So, the correct option is the reaction is not at equilibrium and it will proceed toward the products.

When the rates of forward and reverse reactions are equal, equilibrium is the condition where there is no overall change in the concentrations of reactants and products. When a system is in equilibrium, the concentrations of all reactants and products are constant over time, and the system appears to be in a state of rest. An equilibrium constant [tex](K_e_q)[/tex], which represents the ratio of the concentrations of products to reactants at equilibrium for a reaction, can be used to characterize the state of equilibrium.

Therefore, the correct option is B.

Learn more about equilibrium, here:

https://brainly.com/question/30694482

#SPJ1

384.23 grams KNO₃ is equivalent to 3.8 moles of KNO₃.

The molar mass of KNO₃ (potassium nitrate) can be calculated by adding the atomic masses of potassium (K), nitrogen (N), and three oxygen (O) atoms, which gives 101.1 g/mol.

To find the mass of 3.8 moles of KNO₃, we can use the following formula:

Substituting the given values, we get:

Therefore, 384.18 g of KNO₃ is equivalent to 3.8 moles of KNO₃.

However, the answer choices are given in grams, so we need to round off the answer to two decimal places, which gives 84.23 g KNO₃ (rounded to two decimal places) as the correct answer.

To learn more about moles, here

https://brainly.com/question/31597231

#SPJ4

The mass in grams of 0.30 mol of NaHCO3 can be calculated using the molar mass of NaHCO3, which is 84.01 g/mol.

To do this, we simply multiply the number of moles by the molar mass. Therefore:

Mass in grams = Number of moles x Molar mass
Mass in grams = 0.30 mol x 84.01 g/mol
Mass in grams = 25.203 g

Therefore, the mass in grams of 0.30 mol of NaHCO3 is 25.203 g.

We first need to understand the concept of molar mass. Molar mass is defined as the mass of one mole of a substance and is expressed in grams per mole (g/mol). It is calculated by adding up the atomic masses of all the atoms present in a molecule.

In the case of NaHCO3, the molar mass is calculated by adding the atomic masses of sodium (Na), hydrogen (H), carbon (C), and oxygen (O), which gives us a total of 84.01 g/mol.

When we are given the number of moles of a substance, we can easily convert it to its mass in grams using the formula Mass in grams = Number of moles x Molar mass. This formula helps us to convert the amount of a substance in moles to its corresponding mass in grams.

In conclusion, the mass in grams of 0.30 mol of NaHCO3 is 25.203 g. This calculation was done by multiplying the number of moles of NaHCO3 by its molar mass. Molar mass is a key concept in chemistry, and it allows us to convert between the number of moles of a substance and its mass in grams.

To know more about molar mass, visit:

https://brainly.com/question/22997914#

#SPJ11

When the volume of neon gas is 2.07 L, 22.4 L of ounce (p) at 303 K and 1.2 atm will have the same number of molecules as neon gas at 303 K and 12 atm.

To solve this problem, we can use the ideal gas law equation:

PV = [tex]nRT[/tex], where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

First, we need to find the number of moles of neon gas at 303K and 12 atm. We can use the equation PV = [tex]nRT[/tex] and rearrange it to solve for n: n = PV/RT. Plugging in the values, we get:
[tex]n = (12 atm)(22.4 L)/(0.0821 L*atm/mol*K)(303 K)[/tex]
n = 12.04 mol

So, neon gas at 303K and 12 atm has 12.04 moles.
Now, we need to find the volume of oz (p) at 303K and 1.2 atm that has the same number of molecules. We can use the equation n = N/NA, where N is the number of molecules and NA is Avogadro's number (6.022 x 10^23). Rearranging the equation to solve for V, we get:

V = [tex]nRT[/tex]/P
[tex]V = (12.04 mol)(0.0821 L*atm/mol*K)(303 K)/(1.2 atm)[/tex]
V = 249.5 L

Therefore, at 303K and 1.2 atm, 22.4 L of oz (p) has the same number of molecules as neon gas at 303K and 12 atm when the volume is 249.5 L.

To solve this problem, we'll use the Ideal Gas Law equation, PV=[tex]nRT[/tex], where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature.

First, let's find the number of moles of the given gas, oz (p):
P1 = 1.2 atm
V1 = 22.4 L
T1 = 303 K
R = 0.0821 L atm/mol K (Ideal Gas Constant)

1.2 atm * 22.4 L = n * 0.0821 L atm/mol K * 303 K
n = (1.2 * 22.4) / (0.0821 * 303) = 1 mol

Now, let's find the volume (V2) of neon gas at the given conditions:
P2 = 12 atm
T2 = 303 K
n2 = 1 mol (since we want the same number of molecules)

12 atm * V2 = 1 mol * 0.0821 L atm/mol K * 303 K
V2 = (1 * 0.0821 * 303) / 12 = 2.07 L

Thus, 22.4 L of oz (p) at 303 K and 1.2 atm will have the same number of molecules as neon gas at 303 K and 12 atm when the volume of neon gas is 2.07 L.

For more question on volume

https://brainly.com/question/29796637

#SPJ11

Answer:

Answer: B. 1

Explanation:

I hope this helps you

The mass in grams of 3.45 x 10E24 atoms of carbon is 68.93 g.

To find the mass in grams of 3.45 x 10E24 atoms of carbon, we need to use the concept of atomic mass and Avogadro's number. The atomic mass of carbon is 12.01 g/mol, which means that one mole of carbon contains 6.022 x 10E23 atoms. This is known as Avogadro's number.

So, to find the mass of 3.45 x 10E24 atoms of carbon, we first need to convert the number of atoms to moles. We do this by dividing the given number of atoms by Avogadro's number:

3.45 x 10E24 atoms / 6.022 x 10E23 atoms/mol = 5.74 moles

Next, we can use the molar mass of carbon to find the mass of 5.74 moles of carbon:

5.74 moles x 12.01 g/mol = 68.93 g

Therefore, the mass in grams of 3.45 x 10E24 atoms of carbon is 68.93 g.

To know more about mass in grams refer here: https://brainly.com/question/4220551#

#SPJ11

When 15 g of Mg reacts with 15 g of HCl, 19.6 g of MgCl₂ and 0.208 g mass of H₂ are produced.

The molar mass of Mg is 24.31 g/mol, and the molar mass of HCl is 36.46 g/mol. To determine the number of moles of each substance, we divide the given mass by its molar mass:

moles of Mg = 15 g ÷ 24.31 g/mol = 0.618 mol

moles of HCl = 15 g ÷ 36.46 g/mol = 0.411 mol

Determine the limiting reactant in the reaction by comparing the number of moles of each reactant:

Mg: 0.618 mol

HCl: 0.411 mol × (1 mol Mg ÷ 2 mol HCl) = 0.206 mol

Since HCl is the limiting reactant, it will be completely consumed in the reaction. The amount of MgCl₂ produced can be calculated as:

moles of MgCl₂ = moles of HCl = 0.206 mol

mass of MgCl₂ = moles of MgCl₂ × molar mass of MgCl₂

mass of MgCl₂ = 0.206 mol × 95.21 g/mol = 19.6 g

Similarly, the amount of H₂ produced can be calculated as:

moles of H₂ = moles of HCl × (1 mol H₂ ÷ 2 mol HCl)

moles of H₂ = 0.206 mol × (1 mol H₂ ÷ 2 mol HCl) = 0.103 mol

mass of H₂ = moles of H₂ × molar mass of H₂

mass of H₂ = 0.103 mol × 2.02 g/mol = 0.208 g

To learn more about mass follow the link:

https://brainly.com/question/4577984

#SPJ4

Answer:

Temperature

Agitation

Particle size

Explanation:

The celsius temperature of 1.50 moles of ammonia contained in a 10.0-l vessel under a pressure of 2.0 atm can be determined using the ideal gas law.

The ideal gas law states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. To calculate the temperature in Celsius, the Kelvin temperature is first determined by rearranging the equation and solving for T.

Then, the Kelvin temperature is converted to Celsius by subtracting 273.15 from the Kelvin temperature. In this case, the calculation would be T = (2.0 * 10.0) / (1.50 * 0.0821) = 1100.16 K. Subtracting 273.15 from 1100.16 K yields 827.01 °C, which is equal to 827.01 - 273.15 = -50.0 °C.

In conclusion, the celsius temperature of 1.50 moles of ammonia contained in a 10.0-l vessel under a pressure of 2.0 atm is -50.0 °C.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

Problems with understanding what happens when things burn can be attributed to various factors, such as lack of knowledge about the combustion process, the role of oxygen, and the production of heat and light energy.

When things burn, a chemical reaction called combustion takes place. During this process, a fuel reacts with oxygen, resulting in the release of energy in the form of heat and light. The products of combustion are usually water, carbon dioxide, and sometimes other gases or particles, depending on the fuel and the burning conditions.

One issue in understanding this process is grasping the importance of oxygen. Oxygen is required for combustion to occur, and the presence of more or less oxygen affects the burning process. For example, in a well-ventilated area, the combustion is more efficient, whereas limited oxygen can result in incomplete combustion and the production of harmful byproducts like carbon monoxide.

Another problem in understanding combustion is the role of heat. Heat is both a product of and a catalyst for combustion. As a fuel gets heated, it may reach its ignition temperature, at which point it spontaneously ignites. Heat also contributes to the spread of fire, as it can cause nearby objects to reach their ignition temperature.

The production of light during combustion is another aspect that can cause confusion. The light emitted during burning is a result of excited atoms and molecules in the flame that release energy in the form of light when they return to their original state. This is what makes flames visible and gives them their characteristic colors.

In summary, problems with understanding what happens when things burn stem from a lack of knowledge about the combustion process, the role of oxygen, and the production of heat and light energy. Gaining a deeper understanding of these factors can help individuals better comprehend the complex nature of combustion and fire safety.

To know more about things burn refer here

brainly.com/question/29886555#

#SPJ11

D. Solution A will take longer to dissolve and might have some undissolved salt remaining at the bottom of the solution due to the low temperature.

In Solution A, the salt is in large clumps, the solvent is cold water, and the agitation is slow stirring. These factors contribute to a slower dissolution process. Large clumps have less surface area exposed to the solvent, cold water has less energy to break the ionic bonds between salt ions, and slow stirring provides less agitation to promote dissolution.

Consequently, it will take longer for the salt to dissolve in Solution A, and there might be undissolved salt remaining at the bottom.

to know more about temperature refer here

https://brainly.com/question/11464844#

#SPJ11

The maximum amount of iron (II) oxide that can be formed is 176.9 g if 23.1 g of iron reacts with 53.22 g of oxygen to produce iron (ii) oxide.

The balanced chemical equation for the reaction between iron and oxygen to produce iron (II) oxide is:

4Fe + 3O₂ → 2Fe₂O₃

From the equation, we can see that 4 moles of iron react with 3 moles of oxygen to produce 2 moles of iron (II) oxide.

Calculate the number of moles of each reactant using their respective molar masses:

Number of moles of iron = 23.1 g ÷ 55.845 g/mol

= 0.414 moles

Number of moles of oxygen = 53.22 g ÷ 32 g/mol

= 1.663 moles

Since the stoichiometric ratio of iron to oxygen is 4:3, we can see that oxygen is the limiting reactant because there are only 3 moles of oxygen available for every 4 moles of iron required.

Number of moles of Fe₂O₃ = 2 ÷ 3 × 1.663

= 1.108 moles

Mass of Fe₂O₃ = 1.108 moles × 159.69 g/mol

= 176.9 g

To learn more about oxide follow the link:

brainly.com/question/15319480

#SPJ4

Add 10.0 g of calcium chloride to 10.0 g of sodium hydroxide, we will produce 0.0901 moles of calcium hydroxide.

What is Moles?

Moles (mol) is a unit of measurement in chemistry that represents the amount of a substance. One mole of a substance contains the same number of entities, such as atoms, molecules, or ions, as there are atoms in exactly 12 grams of carbon-12.

to calculate the number of moles of calcium chloride present in 10.0 g of the compound. The molar mass of calcium chloride is 111 g/mol, so:

10.0 g Ca[tex]Cl_2[/tex] × (1 mol / 111 g) = 0.0901 mol Ca[tex]Cl_2[/tex]

Similarly, we need to calculate the number of moles of sodium hydroxide present in 10.0 g of the compound. The molar mass of sodium hydroxide is 40 g/mol, so:

10.0 g NaOH × (1 mol / 40 g) = 0.25 mol NaOH

According to the balanced equation, 1 mole of Ca[tex]Cl_2[/tex]reacts with 2 moles of NaOH, so if we have 0.0901 moles of Ca[tex]Cl_2[/tex] and 0.25 moles of NaOH, then the limiting reagent is Ca[tex]Cl_2[/tex]. Therefore, all of the Ca[tex]Cl_2[/tex]will react and the number of moles of products formed will be determined by the amount of Ca[tex]Cl_2[/tex]:

0.0901 mol Ca[tex]Cl_2[/tex] × (1 mol Ca(OH)2 / 1 mol Ca[tex]Cl_2[/tex]) = 0.0901 mol Ca(OH)2

Therefore, if we add 10.0 g of calcium chloride to 10.0 g of sodium hydroxide, we will produce 0.0901 moles of calcium hydroxide.

To know more about  Moles, visit;

https://brainly.com/question/29367909

#SPJ4

This reaction will  produce 0.125 moles of Ca(OH)2

To determine the number of moles of products formed when 10.0 g of calcium chloride (CaCl2) is added to 10.0 g of sodium hydroxide (NaOH), we need to first determine which chemical reaction takes place and the limiting reagent.

The chemical equation for the reaction between calcium chloride and sodium hydroxide is:

CaCl2 + 2 NaOH → Ca(OH)2 + 2 NaCl

From the balanced equation, we can see that 1 mole of calcium chloride reacts with 2 moles of sodium hydroxide to produce 1 mole of calcium hydroxide and 2 moles of sodium chloride.

The molar masses of calcium chloride and sodium hydroxide are:

Using the molar masses, we can convert the masses of calcium chloride and sodium hydroxide to moles:

We can see that there is an excess of sodium hydroxide, so it is the limiting reagent. Using the stoichiometry of the balanced equation, we can determine the number of moles of products formed:

2 moles of NaOH react with 1 mole of CaCl2 to produce 1 mole of Ca(OH)2

Therefore, 0.250 moles of NaOH will react with 0.125 moles of CaCl2 to produce 0.125 moles of Ca(OH)2

Learn more about moles at:

https://brainly.com/question/29367909

#SPJ1

The mass (in grams) of sodium carbonate, Na₂CO₃ needed to react completely with 25 mL of vinegar is 1.17 grams

First, we shall obtain the mole in 25 mL of vinegar, HC₂H₃O₂

Mole = molarity × volume

Mole of HC₂H₃O₂ = 0.875 × 0.025

Mole of HC₂H₃O₂ = 0.022 mole

Next, we shall determine the mole of sodium carbonate, Na₂CO₃ that react. Details below:

Na₂CO₃ + 2HC₂H₃O₂ -> 2NaC₂H₃O₂ + CO₂ + H₂O

From the balanced equation above,

2 moles of HC₂H₃O₂ reacted with 1 mole of Na₂CO₃

Therefore,

0.022 mole of HC₂H₃O₂ will react with = 0.022 / 2 = 0.011 mole of Na₂CO₃

Finally, we shall determine the mass of Na₂CO₃ needed. Details below:

Mass = Mole × molar mass

Mass of Na₂CO₃ = 0.011 × 106

Mass of Na₂CO₃ = 1.17 grams

Learn more about mass:

https://brainly.com/question/21940152

#SPJ1

4.85 grams of Zn are needed to produce 0.15 grams of H2.

The balanced chemical equation for the reaction between zinc and phosphoric acid is:

[tex]3 Zn + 2 H_3PO_4[/tex] → [tex]3 H_2 + Zn_3(PO4)2[/tex]

Step 1: Calculate the number of moles of [tex]H_2[/tex] produced

We can use the molar mass of hydrogen gas ([tex]H_2[/tex]) to calculate the number of moles produced:

n([tex]H_2[/tex]) = mass of [tex]H_2[/tex] / molar mass of [tex]H_2[/tex]

n([tex]H_2[/tex]) = 0.15 g / 2.016 g/mol = 0.0743 mol

Step 2: Calculate mass  [tex]Z_2[/tex] needed

We can use the molar mass of zinc to convert moles of Zn to grams of Zn:

mass of Zn = n(Zn) x molar mass of Zn

mass of Zn = 0.0743 mol x 65.38 g/mol

mass of Zn = 4.85 g

To know more about molar mass , here

brainly.com/question/22997914

#SPJ4

If sodium increases in the extracellular fluid (ECF), water will move from the intracellular fluid (ICF) to the ECF through osmosis.

This is because sodium is an osmotically active particle, meaning that it affects the concentration of particles in a solution.

When the concentration of sodium in the ECF increases, it creates a hypertonic environment compared to the ICF, which is relatively hypotonic.

As a result, water will move from the hypotonic ICF to the hypertonic ECF in order to balance the concentration of particles between the two compartments.

This movement of water can lead to changes in cell volume and function, which is why maintaining proper electrolyte balance is important for normal cellular function.

To know more about extracellular fluid refer to-

https://brainly.com/question/29307524

#SPJ11

When oxygen accepts electrons, water is not always produced as a byproduct. It depends on the specific chemical reaction that is occurring.

In some reactions, such as the process of respiration in living organisms, oxygen accepts electrons and combines with hydrogen ions (protons) to form water as a byproduct. This reaction can be written as:

[tex]O2 + 4e- + 4H+ → 2H2O[/tex]

In this reaction, oxygen accepts four electrons  and four hydrogen ions  to form two molecules of water.

However, in other reactions, oxygen can accept electrons and form other byproducts. For example, in combustion reactions, oxygen reacts with hydrocarbons to form carbon dioxide and water. The specific reaction that occurs depends on the reactants and conditions involved.

To know more about chemical reaction refer to-

https://brainly.com/question/29039149

#SPJ11

If 4 moles of a gas are at a pressure of 105. 6 kpa and a volume of 12 liters, the temperature of the gas is 399.36 K.

To solve this problem, we can use the ideal gas law: PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in kelvin. Rearranging the equation, we get T = PV/nR.

Substituting the given values, we have:

T = (105.6 kPa)(12 L) / (4 mol)(8.31 J/(mol*K))

Simplifying, we get:

T = 399.36 K

Therefore, the temperature of the gas is 399.36 K, or 126.21°C.

To know more about the moles refer here :

https://brainly.com/question/31597231#

#SPJ11

When a 3.950 L sample of gas is cooled from 91.50°C to a volume of 2.550 L with no change in pressure, the new temperature is approximately -36.61°C.

To find the new temperature when a 3.950 L sample of gas is cooled from 91.50°C to a volume of 2.550 L, we can use the Charles' Law formula. Charles' Law states that the volume of a gas is directly proportional to its temperature, assuming that pressure remains constant.

Mathematically, this can be represented as:

V1/T1 = V2/T2

Here, V1 is the initial volume (3.950 L), T1 is the initial temperature (91.50°C), V2 is the final volume (2.550 L), and T2 is the final temperature, which we need to find.

First, convert the initial temperature from Celsius to Kelvin by adding 273.15:

T1 = 91.50°C + 273.15 = 364.65 K

Now, plug the values into the Charles' Law formula:

(3.950 L) / (364.65 K) = (2.550 L) / T2

To find T2, we can cross-multiply and divide:

T2 = (2.550 L) * (364.65 K) / (3.950 L)
T2 ≈ 236.54 K

Finally, convert the temperature back to Celsius by subtracting 273.15:

New temperature = 236.54 K - 273.15 ≈ -36.61°C

In conclusion, when a 3.950 L sample of gas is cooled from 91.50°C to a volume of 2.550 L with no change in pressure, the new temperature is approximately -36.61°C.

To know more about pressure, visit:

https://brainly.com/question/18431008#

#SPJ11